Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2009-12-14 20:21:58

  BiExi - matka przelozona

BiExi
matka przelozona
Skąd: Gorlice
Zarejestrowany: 2004-04-16
Serwis

FreeRadius cos nie funguje....

Usiluje skonfigurowac Freeradius + mt + pppoe
(freeradius gentoo)
Zawartosc bazy danych:

Kod:

radius=> SELECT username, attribute, op, value FROM radcheck;
 username |     attribute      | op |       value       
----------+--------------------+----+-------------------
 test     | Calling-Station-Id | == | 00:0E:8E:2E:CD:4B
 test     | User-Password      | == | test
(2 rows)

radius=> SELECT username, attribute, op, value FROM radreply;
 username |     attribute     | op |    value     
----------+-------------------+----+--------------
 test     | Framed-IP-Address | := | 192.168.1.10
 test     | Auth-Type         | := | ACCEPT
(2 rows)

radius=> SELECT nasname, shortname, secret, ports FROM nas;
   nasname   | shortname | secret | ports 
-------------+-----------+--------+-------
 172.22.11.4 | kamikadze | dupa   |     1
(1 row)

radius=> SELECT UserName, GroupName FROM radusergroup;
 username | groupname 
----------+-----------
 test     | static
(1 row)

radius=> SELECT GroupName, Attribute, Value, op FROM radgroupcheck;
 groupname | attribute | value  | op 
-----------+-----------+--------+----
 static    | Auth-Type | mschap | :=
(1 row)

radius=> SELECT GroupName, Attribute, Value, Op FROM radgroupreply;
 groupname |     attribute      |        value        | op 
-----------+--------------------+---------------------+----
 static    | Service-Type       | Login-User          | :=
 static    | Framed-Compression | Van-Jacobsen-TCP-IP | ==
 static    | Framed-Protocol    | PPP                 | ==
 static    | Framed-MTU         | 1500                | ==
 static    | Service-Type       | Framed-User         | ==
(5 rows)

Log z debu'a radius'a

Kod:

rad_recv: Access-Request packet from host 172.22.11.4 port 48996, id=43, length=171
    Service-Type = Framed-User
    Framed-Protocol = PPP
    NAS-Port = 19
    NAS-Port-Type = Ethernet
    User-Name = "test"
    Calling-Station-Id = "00:0E:8E:20:CD:4B"
    Called-Station-Id = "mt"
    NAS-Port-Id = "wlan1"
    MS-CHAP-Challenge = 0xda3eca481470e312
    MS-CHAP-Response = 0x0101000000000000000000000000000000000000000000000000c87163cbd9c7e4b6ba82a172e653311e4e09e87b7ebf26a2
    NAS-Identifier = "kamikadze"
    NAS-IP-Address = 172.22.11.4
+- entering group authorize
++[preprocess] returns ok
  rlm_mschap: Found MS-CHAP attributes.  Setting 'Auth-Type  = mschap'
++[mschap] returns ok
    rlm_realm: No '@' in User-Name = "test", looking up realm NULL
    rlm_realm: No such realm "NULL"
++[suffix] returns noop
  rlm_eap: No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
    expand: %{User-Name} -> test
rlm_sql (sql): sql_set_user escaped user --> 'test'
rlm_sql (sql): Reserving sql socket id: 3
    expand: SELECT id, UserName, Attribute, Value, Op   FROM radcheck   WHERE Username = '%{SQL-User-Name}'   ORDER BY id -> SELECT id, UserName, Attribute, Value, Op   FROM radcheck   WHERE Username = 'test'   ORDER BY id
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 2 , fields = 5
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
rlm_sql (sql): User found in radcheck table
    expand: SELECT id, UserName, Attribute, Value, Op   FROM radreply   WHERE Username = '%{SQL-User-Name}'   ORDER BY id -> SELECT id, UserName, Attribute, Value, Op   FROM radreply   WHERE Username = 'test'   ORDER BY id
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 2 , fields = 5
    expand: SELECT GroupName FROM radusergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority -> SELECT GroupName FROM radusergroup WHERE UserName='test' ORDER BY priority
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 1 , fields = 1
    expand: SELECT id, GroupName, Attribute, Value, op   FROM radgroupcheck   WHERE GroupName = '%{Sql-Group}'   ORDER BY id -> SELECT id, GroupName, Attribute, Value, op   FROM radgroupcheck   WHERE GroupName = 'static'   ORDER BY id
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 1 , fields = 5
rlm_sql (sql): User found in group static
    expand: SELECT id, GroupName, Attribute, Value, op   FROM radgroupreply   WHERE GroupName = '%{Sql-Group}'   ORDER BY id -> SELECT id, GroupName, Attribute, Value, op   FROM radgroupreply   WHERE GroupName = 'static'   ORDER BY id
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 5 , fields = 5
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
  rad_check_password:  Found Auth-Type mschap
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!    Replacing User-Password in config items with Cleartext-Password.     !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! Please update your configuration so that the "known good"               !!!
!!! clear text password is in Cleartext-Password, and not in User-Password. !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
auth: type "MSCHAP"
+- entering group MS-CHAP
  rlm_mschap: Told to do MS-CHAPv1 with NT-Password
++[mschap] returns ok
+- entering group post-auth
++[exec] returns noop
Sending Access-Accept of id 43 to 172.22.11.4 port 48996
    Framed-IP-Address := 192.168.1.10
    Service-Type := Login-User
    Framed-Compression == Van-Jacobson-TCP-IP
    Framed-Protocol == PPP
    Framed-MTU == 1500
    Service-Type == Framed-User
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 172.22.11.4 port 54796, id=44, length=137
    Service-Type = Framed-User
    Framed-Protocol = PPP
    NAS-Port = 19
    NAS-Port-Type = Ethernet
    User-Name = "test"
    Calling-Station-Id = "00:0E:8E:20:CD:4B"
    Called-Station-Id = "mt"
    NAS-Port-Id = "wlan1"
    Acct-Session-Id = "8190000e"
    Framed-IP-Address = 192.168.1.10
    Acct-Authentic = RADIUS
    Event-Timestamp = "Jan  1 1970 01:53:37 CET"
    Acct-Status-Type = Start
    NAS-Identifier = "kamikadze"
    NAS-IP-Address = 172.22.11.4
    Acct-Delay-Time = 0
+- entering group preacct
++[preprocess] returns ok
rlm_acct_unique: Hashing 'NAS-Port = 19,Client-IP-Address = 172.22.11.4,NAS-IP-Address = 172.22.11.4,Acct-Session-Id = "8190000e",User-Name = "test"'
rlm_acct_unique: Acct-Unique-Session-ID = "241460af86565bdd".
++[acct_unique] returns ok
    rlm_realm: No '@' in User-Name = "test", looking up realm NULL
    rlm_realm: No such realm "NULL"
++[suffix] returns noop
++[files] returns noop
+- entering group accounting
    expand: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radius/radacct/172.22.11.4/detail-20091214
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/172.22.11.4/detail-20091214
    expand: %t -> Mon Dec 14 20:00:10 2009
++[detail] returns ok
++[unix] returns ok
    expand: /var/log/radius/radutmp -> /var/log/radius/radutmp
    expand: %{User-Name} -> test
++[radutmp] returns ok
    expand: %{User-Name} -> test
rlm_sql (sql): sql_set_user escaped user --> 'test'
    expand: %{NAS-Port} -> 19
    expand: %{Acct-Delay-Time} -> 0
    expand: INSERT INTO radacct   (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress,    NASPortId, NASPortType, AcctStartTime, AcctAuthentic,   ConnectInfo_start, CalledStationId, CallingStationId, ServiceType,   FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey)   VALUES('%{Acct-Session-Id}',   '%{Acct-Unique-Session-Id}',   '%{SQL-User-Name}',   NULLIF('%{Realm}', ''),   '%{NAS-IP-Address}',   %{%{NAS-Port}:-NULL}::integer,   '%{NAS-Port-Type}',   ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval),   '%{Acct-Authentic}',   '%{Connect-Info}',   '%{Called-Station-Id}',   '%{Calling-Station-Id}',   '%{Service-Type}',   '%{Framed-Protocol}',   NULLIF('%{Framed-IP-Address}', '')::inet,   0,   '%{X-Ascend-Session-Svr-Key}') -> INSERT INTO radacct   (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress,    NASPortId, NASPortType, AcctStartTime, AcctAuthentic,   ConnectInfo_start, CalledStationId, CallingStationId, ServiceType,   FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey)   VALUES('8190000e',   '241460af86565bdd',   'test',   NULLIF('', ''),   '172.22.11.4',   19::integer,   'Ethernet',   ('2009-12-14 20:00:10'::timestamp - '0'::interval),   'RADIUS',   '',   'mt',   '00:0E:8E:20:CD:4B',   'Framed-User',   'PPP',   NULLIF('192.168.1.10', '')::inet,   0,   '')
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql_postgresql: Status: PGRES_COMMAND_OK
rlm_sql_postgresql: query affected rows = 1
rlm_sql (sql): Released sql socket id: 2
++[sql] returns ok
    expand: %{User-Name} -> test
 attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 44 to 172.22.11.4 port 54796
Finished request 1.
Cleaning up request 1 ID 44 with timestamp +12
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 172.22.11.4 port 39735, id=45, length=185
    Service-Type = Framed-User
    Framed-Protocol = PPP
    NAS-Port = 19
    NAS-Port-Type = Ethernet
    User-Name = "test"
    Calling-Station-Id = "00:0E:8E:20:CD:4B"
    Called-Station-Id = "mt"
    NAS-Port-Id = "wlan1"
    Acct-Session-Id = "8190000e"
    Framed-IP-Address = 192.168.1.10
    Acct-Authentic = RADIUS
    Event-Timestamp = "Jan  1 1970 01:53:38 CET"
    Acct-Session-Time = 1
    Acct-Input-Octets = 141
    Acct-Input-Gigawords = 0
    Acct-Input-Packets = 7
    Acct-Output-Octets = 105
    Acct-Output-Gigawords = 0
    Acct-Output-Packets = 7
    Acct-Status-Type = Stop
    Acct-Terminate-Cause = NAS-Error
    NAS-Identifier = "kamikadze"
    NAS-IP-Address = 172.22.11.4
    Acct-Delay-Time = 0
+- entering group preacct
++[preprocess] returns ok
rlm_acct_unique: Hashing 'NAS-Port = 19,Client-IP-Address = 172.22.11.4,NAS-IP-Address = 172.22.11.4,Acct-Session-Id = "8190000e",User-Name = "test"'
rlm_acct_unique: Acct-Unique-Session-ID = "241460af86565bdd".
++[acct_unique] returns ok
    rlm_realm: No '@' in User-Name = "test", looking up realm NULL
    rlm_realm: No such realm "NULL"
++[suffix] returns noop
++[files] returns noop
+- entering group accounting
    expand: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radius/radacct/172.22.11.4/detail-20091214
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/172.22.11.4/detail-20091214
    expand: %t -> Mon Dec 14 20:00:12 2009
++[detail] returns ok
++[unix] returns ok
    expand: /var/log/radius/radutmp -> /var/log/radius/radutmp
    expand: %{User-Name} -> test
++[radutmp] returns ok
    expand: %{User-Name} -> test
rlm_sql (sql): sql_set_user escaped user --> 'test'
    expand: %{Acct-Delay-Time} -> 0
    expand: %{Acct-Delay-Time} -> 0
    expand: %{Acct-Input-Gigawords} -> 0
    expand: %{Acct-Input-Octets} -> 141
    expand: %{Acct-Output-Gigawords} -> 0
    expand: %{Acct-Output-Octets} -> 105
    expand: UPDATE radacct   SET AcctStopTime = ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval),   AcctSessionTime = CASE WHEN '%{Acct-Session-Time}' = '' THEN   (EXTRACT(EPOCH FROM ('%S'::TIMESTAMP WITH TIME ZONE - AcctStartTime::TIMESTAMP WITH TIME ZONE   - '%{%{Acct-Delay-Time}:-0}'::INTERVAL)))::BIGINT ELSE '%{Acct-Session-Time}' END,   AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint),   AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint),   AcctTerminateCause = '%{Acct-Terminate-Cause}',   AcctStopDelay = 0,   FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet,   ConnectInfo_stop = '%{Connect-Info}'   WHERE AcctSessionId = '%{Acct-Session-Id}'   AND UserName = '%{SQL-User-Name}'   AND NASIPAddress = '%{NAS-IP-Address}'   AND AcctStopTime IS NULL -> UPDATE radacct   SET AcctStopTime = ('2009-12-14 20:00:12'::timestamp - '0'::interval),   AcctSessionTime = CASE WHEN '1' = '' THEN   (EXTRACT(EPOCH FROM ('2009-12-14 20:00:12'::TIMESTAMP WITH TIME ZONE - AcctStartTime::TIMESTAMP WITH TIME ZONE   - '0'::INTERVAL)))::BIGINT ELSE '1' END,   AcctInputOctets = (('0'::bigint << 32) + '141'::bigint),   AcctOutputOctets = (('0'::bigint << 32) + '105'::bigint),   AcctTerminateCause = 'NAS-Error',   AcctStopDelay = 0,   FramedIPAddress = NULLIF('192.168.1.10', '')::inet,   ConnectInfo_stop = ''   WHERE AcctSessionId = '8190000e'   AND UserName = 'test'   AND NASIPAddress = '172.22.11.4'   AND AcctStopTime IS NULL
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql_postgresql: Status: PGRES_COMMAND_OK
rlm_sql_postgresql: query affected rows = 1
rlm_sql (sql): Released sql socket id: 1
++[sql] returns ok
    expand: %{User-Name} -> test
 attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 45 to 172.22.11.4 port 39735
Finished request 2.
Cleaning up request 2 ID 45 with timestamp +14
Going to the next request
Waking up in 3.9 seconds.
Cleaning up request 0 ID 43 with timestamp +12
Ready to process requests.

log /var/log/radius/radacct/172.22.11.4/detail-20091214

Kod:

Mon Dec 14 20:00:10 2009
    Service-Type = Framed-User
    Framed-Protocol = PPP
    NAS-Port = 19
    NAS-Port-Type = Ethernet
    User-Name = "test"
    Calling-Station-Id = "00:0E:8E:20:CD:4B"
    Called-Station-Id = "mt"
    NAS-Port-Id = "wlan1"
    Acct-Session-Id = "8190000e"
    Framed-IP-Address = 192.168.1.10
    Acct-Authentic = RADIUS
    Event-Timestamp = "Jan  1 1970 01:53:37 CET"
    Acct-Status-Type = Start
    NAS-Identifier = "kamikadze"
    NAS-IP-Address = 172.22.11.4
    Acct-Delay-Time = 0
    Acct-Unique-Session-Id = "241460af86565bdd"
    Timestamp = 1260817210
    Request-Authenticator = Verified

Mon Dec 14 20:00:12 2009
    Service-Type = Framed-User
    Framed-Protocol = PPP
    NAS-Port = 19
    NAS-Port-Type = Ethernet
    User-Name = "test"
    Calling-Station-Id = "00:0E:8E:20:CD:4B"
    Called-Station-Id = "mt"
    NAS-Port-Id = "wlan1"
    Acct-Session-Id = "8190000e"
    Framed-IP-Address = 192.168.1.10
    Acct-Authentic = RADIUS
    Event-Timestamp = "Jan  1 1970 01:53:38 CET"
    Acct-Session-Time = 1
    Acct-Input-Octets = 141
    Acct-Input-Gigawords = 0
    Acct-Input-Packets = 7
    Acct-Output-Octets = 105
    Acct-Output-Gigawords = 0
    Acct-Output-Packets = 7
    Acct-Status-Type = Stop
    Acct-Terminate-Cause = NAS-Error
    NAS-Identifier = "kamikadze"
    NAS-IP-Address = 172.22.11.4
    Acct-Delay-Time = 0
    Acct-Unique-Session-Id = "241460af86565bdd"
    Timestamp = 1260817212
    Request-Authenticator = Verified

Log z mikrotika'a

Kod:

00:53:37 pppoe,info PPPoE connection established from 00:0E:8E:20:CD:4B 
00:53:37 pppoe,ppp,info <pppoe-0>: waiting for call... 
00:53:37 radius,debug new request 1b:42 code=Access-Request service=ppp called-id=mt 
00:53:37 radius,debug sending 1b:42 to 172.22.11.10:1812 
00:53:37 radius,debug,packet sending Access-Request with id 43 to 172.22.11.10:1812 
00:53:37 radius,debug,packet     Signature = 0x18b543766e72e8bc21c38a10a5568a0f 
00:53:37 radius,debug,packet     Service-Type = 2 
00:53:37 radius,debug,packet     Framed-Protocol = 1 
00:53:37 radius,debug,packet     NAS-Port = 19 
00:53:37 radius,debug,packet     NAS-Port-Type = 15 
00:53:37 radius,debug,packet     User-Name = "test" 
00:53:37 radius,debug,packet     Calling-Station-Id = "00:0E:8E:20:CD:4B" 
00:53:37 radius,debug,packet     Called-Station-Id = "mt" 
00:53:37 radius,debug,packet     NAS-Port-Id = "wlan1" 
00:53:37 radius,debug,packet     MS-CHAP-Challenge = 0xda3eca481470e312 
00:53:37 radius,debug,packet     MS-CHAP-Response = 0x01010000000000000000000000000000 
00:53:37 radius,debug,packet       00000000000000000000c87163cbd9c7 
00:53:37 radius,debug,packet       e4b6ba82a172e653311e4e09e87b7ebf 
00:53:37 radius,debug,packet       26a2 
00:53:37 radius,debug,packet     NAS-Identifier = "kamikadze" 
00:53:37 radius,debug,packet     NAS-IP-Address = 172.22.11.4 
00:53:37 radius,debug,packet received Access-Accept with id 43 from 172.22.11.10:1812 
00:53:37 radius,debug,packet     Signature = 0x58df46c9054b43d5bea6516e60650e48 
00:53:37 radius,debug,packet     Framed-IP-Address = 192.168.1.10 
00:53:37 radius,debug,packet     Service-Type = 1 
00:53:37 radius,debug,packet     Framed-Compression = 1 
00:53:37 radius,debug,packet     Framed-Protocol = 1 
00:53:37 radius,debug,packet     Framed-MTU = 1500 
00:53:37 radius,debug,packet     Service-Type = 2 
00:53:37 radius,debug received reply for 1b:42 
00:53:37 pppoe,ppp,info <pppoe-0>: authenticated 
00:53:37 radius,debug new request 1b:00 code=Accounting-Request service=ppp called-id=mt 
00:53:37 radius,debug sending 1b:00 to 172.22.11.10:1813 
00:53:37 radius,debug,packet sending Accounting-Request with id 44 to 172.22.11.10:1813 
00:53:37 radius,debug,packet     Signature = 0x60d000e3a2c2902462d510f55e1c4c2c 
00:53:37 radius,debug,packet     Service-Type = 2 
00:53:37 radius,debug,packet     Framed-Protocol = 1 
00:53:37 radius,debug,packet     NAS-Port = 19 
00:53:37 radius,debug,packet     NAS-Port-Type = 15 
00:53:37 radius,debug,packet     User-Name = "test" 
00:53:37 radius,debug,packet     Calling-Station-Id = "00:0E:8E:20:CD:4B" 
00:53:37 radius,debug,packet     Called-Station-Id = "mt" 
00:53:37 radius,debug,packet     NAS-Port-Id = "wlan1" 
00:53:37 radius,debug,packet     Acct-Session-Id = "8190000e" 
00:53:37 radius,debug,packet     Framed-IP-Address = 192.168.1.10 
00:53:37 radius,debug,packet     Acct-Authentic = 1 
00:53:37 radius,debug,packet     Event-Timestamp = 3217 
00:53:37 radius,debug,packet     Acct-Status-Type = 1 
00:53:37 radius,debug,packet     NAS-Identifier = "kamikadze" 
00:53:37 radius,debug,packet     NAS-IP-Address = 172.22.11.4 
00:53:37 radius,debug,packet     Acct-Delay-Time = 0 
00:53:37 radius,debug,packet received Accounting-Response with id 44 from 172.22.11.10:1813 
00:53:37 radius,debug,packet     Signature = 0x1f2007f0cc9fbdd29adfd375de9a3b21 
00:53:37 radius,debug received reply for 1b:00 
00:53:37 radius,debug request 1b:00 processed 
00:53:38 radius,debug new request 1b:00 code=Accounting-Request service=ppp called-id=mt 
00:53:38 radius,debug sending 1b:00 to 172.22.11.10:1813 
00:53:38 radius,debug,packet sending Accounting-Request with id 45 to 172.22.11.10:1813 
00:53:38 radius,debug,packet     Signature = 0xcfb4ab401e2bd4c536fe9e15f1864657 
00:53:38 radius,debug,packet     Service-Type = 2 
00:53:38 radius,debug,packet     Framed-Protocol = 1 
00:53:38 radius,debug,packet     NAS-Port = 19 
00:53:38 radius,debug,packet     NAS-Port-Type = 15 
00:53:38 radius,debug,packet     User-Name = "test" 
00:53:38 radius,debug,packet     Calling-Station-Id = "00:0E:8E:20:CD:4B" 
00:53:38 radius,debug,packet     Called-Station-Id = "mt" 
00:53:38 radius,debug,packet     NAS-Port-Id = "wlan1" 
00:53:38 radius,debug,packet     Acct-Session-Id = "8190000e" 
00:53:38 radius,debug,packet     Framed-IP-Address = 192.168.1.10 
00:53:38 radius,debug,packet     Acct-Authentic = 1 
00:53:38 radius,debug,packet     Event-Timestamp = 3218 
00:53:38 radius,debug,packet     Acct-Session-Time = 1 
00:53:38 radius,debug,packet     Acct-Input-Octets = 141 
00:53:38 radius,debug,packet     Acct-Input-Gigawords = 0 
00:53:38 radius,debug,packet     Acct-Input-Packets = 7 
00:53:38 radius,debug,packet     Acct-Output-Octets = 105 
00:53:38 radius,debug,packet     Acct-Output-Gigawords = 0 
00:53:38 radius,debug,packet     Acct-Output-Packets = 7 
00:53:38 radius,debug,packet     Acct-Status-Type = 2 
00:53:38 radius,debug,packet     Acct-Terminate-Cause = 9 
00:53:38 radius,debug,packet     NAS-Identifier = "kamikadze" 
00:53:38 radius,debug,packet     NAS-IP-Address = 172.22.11.4 
00:53:38 radius,debug,packet     Acct-Delay-Time = 0 
00:53:38 pppoe,ppp,info <pppoe-0>: terminating... - could not determine remote IP address 
00:53:38 radius,debug,packet received Accounting-Response with id 45 from 172.22.11.10:1813 
00:53:38 radius,debug,packet     Signature = 0x4a7bb93717e582556c176a31170e33eb 
00:53:38 radius,debug received reply for 1b:00 
00:53:38 radius,debug request 1b:00 processed 
00:53:38 pppoe,ppp,info <pppoe-0>: disconnected
[url=http://dug.net.pl][b]DUG[/b][/url]

Offline

 

#2  2009-12-14 23:35:49

  bolos_11 - Użytkownik

bolos_11
Użytkownik
Zarejestrowany: 2006-10-30

Re: FreeRadius cos nie funguje....

ja mam tak:

Kod:

Calling-Station-Id  == 
Simultaneous-Use  := 
User-Password      :=
Framed-IP-Netmask =
Framed-IP-Address =
mschap2

mschap1 nie obsluguja zadne nowe windowsy !

Ostatnio edytowany przez bolos_11 (2009-12-14 23:39:48)

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.007 seconds, 9 queries executed ]

Informacje debugowania

Time (s) Query
0.00011 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00098 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.119.108.233' WHERE u.id=1
0.00068 UPDATE punbb_online SET logged=1732686200 WHERE ident='18.119.108.233'
0.00044 SELECT * FROM punbb_online WHERE logged<1732685900
0.00060 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=15734 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00196 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=15734 ORDER BY p.id LIMIT 0,25
0.00083 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=15734
Total query time: 0.00569 s