Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2017-07-15 22:36:12
Crossive - Użytkownik
- Crossive
- Użytkownik
- Zarejestrowany: 2017-07-15
Problem z wykrywaniem Karty sieciowej pod USB.
Witam. Mam problem z wyszukaniem mojej karty Wi-Fi pod USB przez system Linux Kali.Zarówno na wirtualnej maszynie jak i podczas uruchamiania systemu w trybie live CD. W sieci jest pełno poradników jak można rozwiązać ten problem, lecz żaden z nich nie działa. Sama karta działa dobrze normalnie na Windowsie.
-Próbowałem dodać kartę sieciowa Bridge w vBoxie i tam ustawić mój adapter. Jest wtedy co prawda dostęp do internetu lecz, zaliczony jest on jako wired.
-Próbowałem podłączyć adapter do controlera USB w vBoxie, ale i to nie działa i system poprostu nie widzi tej karty.(Acz kolwiek w "lsusb" jest widoczne nowe urządzenie)
-Ściągnąłem rozszerzenie pozwalające Vboxowi obsługę USB 2.0 i 3.0 lecz to również nie pomogło.
-Próbowałem też zainstalować pakiet Compact wireless,ale on dodaje 2 karty z których żadna nie jest moją pod USB i z którymi nie mogę nic zrobić.
Hostuje maszynę na Windows 10, a hostowany system to Linux Kali. Adapter WiFi to TP Link TL-WN722N. Jakieś sugestie jak mogę sprawić, aby karta USB została wykryta przez System?
Proszę o pomoc. Z góry dziękuję.
Offline
#2 2017-07-16 09:24:56
arecki - 
Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: Problem z wykrywaniem Karty sieciowej pod USB.
Kod:
apt-get install firmware-atheros
Offline
#3 2017-07-16 11:25:27
Crossive - Użytkownik
- Crossive
- Użytkownik
- Zarejestrowany: 2017-07-15
Re: Problem z wykrywaniem Karty sieciowej pod USB.
Niestety po zainstalowaniu tego w dalszym ciągu nie wyszukuje Adaptera.
Jakieś inne sugestię?
Offline
#4 2017-07-16 11:39:18
morfik - Cenzor wirtualnego świata
#5 2017-07-16 11:43:43
Crossive - Użytkownik
- Crossive
- Użytkownik
- Zarejestrowany: 2017-07-15
Re: Problem z wykrywaniem Karty sieciowej pod USB.
TL-WN722N(EU) Ver:2.0
Offline
#6 2017-07-16 11:45:07
morfik - Cenzor wirtualnego świata
#7 2017-07-16 12:00:16
Crossive - Użytkownik
- Crossive
- Użytkownik
- Zarejestrowany: 2017-07-15
Re: Problem z wykrywaniem Karty sieciowej pod USB.
Niestety nadal nic :(
Offline
#8 2017-07-16 12:04:51
morfik - Cenzor wirtualnego świata
#9 2017-07-16 12:20:51
Crossive - Użytkownik
- Crossive
- Użytkownik
- Zarejestrowany: 2017-07-15
Re: Problem z wykrywaniem Karty sieciowej pod USB.
Kod:
[ 133.924879] usb 1-1: new high-speed USB device number 3 using ehci-pci [ 134.266230] usb 1-1: New USB device found, idVendor=2357, idProduct=010c [ 134.266233] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 134.266234] usb 1-1: Product: 802.11n NIC [ 134.266235] usb 1-1: Manufacturer: Realtek [ 134.266236] usb 1-1: SerialNumber: 00E04C0001
Offline
#10 2017-07-16 12:54:19
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: Problem z wykrywaniem Karty sieciowej pod USB.
A pokaż co tam logi mówią o firmware.
Offline
#11 2017-07-16 13:03:24
morfik - Cenzor wirtualnego świata
#12 2017-07-16 14:01:56
Crossive - Użytkownik
- Crossive
- Użytkownik
- Zarejestrowany: 2017-07-15
Re: Problem z wykrywaniem Karty sieciowej pod USB.
4.9.0-kali3-686-pae
i nie mogę znaleźć w logach nic o firmware.
Offline
#13 2017-07-16 14:06:36
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Problem z wykrywaniem Karty sieciowej pod USB.
[quote=Crossive]4.9.0-kali3-686-pae
i nie mogę znaleźć w logach nic o firmware.[/quote]
Znowu Kali? jak chcesz się bawić w "hakiera" to szoruj do sklepu po [b]TL-722N v1[/b]
z Atherosem, który bryka na sterze [b]ath9k_htc[/b].
Dokładnie taki:
description: Wireless interface
physical id: 2
bus info: usb@2:4
logical name: wlan0
serial: ec:08:6b:17:66:e3
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=[b]ath9k_htc[/b] driverversion=4.12.1-g1 [b]firmware=1.4[/b] link=no multicast=yes wireless=IEEE 802.11[/quote]
Też potrzebuje firmware, ale bryka jak należy...
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#14 2017-07-16 15:35:35
wikingagressor - Użytkownik
- wikingagressor
- Użytkownik
- Skąd: Józefów k.Błonia, mazowieck
- Zarejestrowany: 2015-02-03
Re: Problem z wykrywaniem Karty sieciowej pod USB.
Pokaz co sie dzieje po wlozeniu dongla. Szczegolnie wazne sa wiadomosci z dmesg.
Peace, Love and Debian for the World!!!
Offline
#15 2017-07-16 15:55:46
Crossive - Użytkownik
- Crossive
- Użytkownik
- Zarejestrowany: 2017-07-15
Re: Problem z wykrywaniem Karty sieciowej pod USB.
Powyżej juz podałem co pokazuje dmesg kiedy podepnę Adapter
Kod:
[ 91.948081] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 92.294637] usb 1-1: New USB device found, idVendor=2357, idProduct=010c [ 92.294639] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 92.294640] usb 1-1: Product: 802.11n NIC [ 92.294641] usb 1-1: Manufacturer: Realtek [ 92.294642] usb 1-1: SerialNumber: 00E04C0001
Tu jest całe dmesg:
Kod:
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000741effff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000741f0000-0x00000000741fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x741f0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [c009fff0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x0adfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x0a96b000, 0x0a96bfff] PGTABLE
[ 0.000000] BRK [0x0a96c000, 0x0a96dfff] PGTABLE
[ 0.000000] BRK [0x0a96e000, 0x0a96efff] PGTABLE
[ 0.000000] BRK [0x0a96f000, 0x0a96ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34ea9000-0x3674bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 0x00000000741F0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000741F00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 0x00000000741F0470 0021C8 (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 0x00000000741F0200 000040
[ 0.000000] ACPI: FACS 0x00000000741F0200 000040
[ 0.000000] ACPI: APIC 0x00000000741F0240 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.000000] ACPI: SSDT 0x00000000741F02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 967MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:379fd001, primary cpu clock
[ 0.000000] kvm-clock: using sched offset of 9612877639 cycles
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x00000000741effff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000741effff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000741effff]
[ 0.000000] On node 0 totalpages: 475534
[ 0.000000] free_area_init_node: node 0, pgdat ca7c4ac0, node_mem_map f69a4024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 247794 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x74200000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f698d000 s50636 r0 d31284 u81920
[ 0.000000] pcpu-alloc: s50636 r0 d31284 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 473531
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-kali3-686-pae root=/dev/sda1 ro initrd=/install/initrd.gz quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:000741f0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1849544K/1902136K available (5718K kernel code, 641K rwdata, 1692K rodata, 744K init, 456K bss, 52592K reserved, 0K cma-reserved, 991176K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xca7e1000 - 0xca89b000 ( 744 kB)
.data : 0xca595ef2 - 0xca7df580 (2341 kB)
.text : 0xca000000 - 0xca595ef2 (5719 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f482e000 soft=f4830000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Detected 3886.290 MHz processor
[ 0.106228] Calibrating delay loop (skipped) preset value.. 7772.58 BogoMIPS (lpj=15545160)
[ 0.106231] pid_max: default: 32768 minimum: 301
[ 0.106249] ACPI: Core revision 20160831
[ 0.107144] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.107165] Security Framework initialized
[ 0.107166] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.107171] AppArmor: AppArmor disabled by boot time parameter
[ 0.107181] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.107182] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.107408] mce: CPU supports 0 MCE banks
[ 0.107426] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.107427] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.118025] Freeing SMP alternatives memory: 24K (ca89b000 - ca8a1000)
[ 0.126145] ftrace: allocating 23723 entries in 47 pages
[ 0.158338] smpboot: Max logical packages: 1
[ 0.158365] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.159744] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.262922] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.262926] Performance Events: PMU not available due to virtualization, using software events only.
[ 0.262965] KVM setup paravirtual spinlock
[ 0.263349] x86: Booted up 1 node, 1 CPUs
[ 0.263350] smpboot: Total of 1 processors activated (7772.58 BogoMIPS)
[ 0.263607] devtmpfs: initialized
[ 0.263778] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.263783] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.263812] pinctrl core: initialized pinctrl subsystem
[ 0.263893] NET: Registered protocol family 16
[ 0.264025] cpuidle: using governor ladder
[ 0.264026] cpuidle: using governor menu
[ 0.264253] ACPI: bus type PCI registered
[ 0.264254] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.264326] PCI: Using configuration type 1 for base access
[ 0.264327] PCI: Using configuration type 1 for extended access
[ 0.264897] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.265032] ACPI: Added _OSI(Module Device)
[ 0.265032] ACPI: Added _OSI(Processor Device)
[ 0.265033] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.265034] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.265277] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.267344] ACPI: Interpreter enabled
[ 0.267354] ACPI: (supports S0 S5)
[ 0.267354] ACPI: Using IOAPIC for interrupt routing
[ 0.267493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270982] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.270985] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.270988] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.271235] PCI host bridge to bus 0000:00
[ 0.271237] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.271238] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.271239] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.271240] pci_bus 0000:00: root bus resource [mem 0x74200000-0xffdfffff window]
[ 0.271242] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.271276] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.271852] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.272415] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.272775] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.272925] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.272926] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.272927] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.272928] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.273113] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 0.275789] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe1ffffff pref]
[ 0.285896] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.287012] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[ 0.288790] pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
[ 0.292860] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.293961] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
[ 0.294779] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[ 0.295573] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[ 0.298964] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.299051] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
[ 0.299114] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
[ 0.299607] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.300473] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
[ 0.306741] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.307173] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
[ 0.307182] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
[ 0.307422] pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
[ 0.308323] pci 0000:00:0b.0: reg 0x10: [mem 0xf0805000-0xf0805fff]
[ 0.313901] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.314767] pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
[ 0.316379] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
[ 0.318034] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
[ 0.318858] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
[ 0.320363] pci_bus 0000:00: on NUMA node 0
[ 0.321451] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.321645] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.321722] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.321796] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.321905] ACPI: Enabled 2 GPEs in block 00 to 07
[ 0.322014] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.322015] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.322017] vgaarb: loaded
[ 0.322017] vgaarb: bridge control possible 0000:00:02.0
[ 0.322084] PCI: Using ACPI for IRQ routing
[ 0.322085] PCI: pci_cache_line_size set to 64 bytes
[ 0.322266] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.322268] e820: reserve RAM buffer [mem 0x741f0000-0x77ffffff]
[ 0.322420] clocksource: Switched to clocksource kvm-clock
[ 0.332633] VFS: Disk quotas dquot_6.6.0
[ 0.332646] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.332706] pnp: PnP ACPI init
[ 0.332766] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.332820] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.333370] pnp: PnP ACPI: found 2 devices
[ 0.333372] PnPBIOS: Disabled by ACPI PNP
[ 0.367923] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.367934] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.367935] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.367937] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.367938] pci_bus 0000:00: resource 7 [mem 0x74200000-0xffdfffff window]
[ 0.367977] NET: Registered protocol family 2
[ 0.372073] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.372081] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.372090] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.372101] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.372104] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.372172] NET: Registered protocol family 1
[ 0.372180] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.372205] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.372248] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.373963] PCI: CLS 0 bytes, default 64
[ 0.374005] Unpacking initramfs...
[ 0.786050] Freeing initrd memory: 25228K (f4ea9000 - f674c000)
[ 0.786393] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.786589] audit: initializing netlink subsys (disabled)
[ 0.786606] audit: type=2000 audit(1500212984.205:1): initialized
[ 0.786818] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.786828] zbud: loaded
[ 0.787095] bounce: pool size: 64 pages
[ 0.787102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.787117] io scheduler noop registered
[ 0.787118] io scheduler deadline registered
[ 0.787125] io scheduler cfq registered (default)
[ 0.787197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.787201] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.787256] GHES: HEST is not enabled!
[ 0.787269] isapnp: Scanning for PnP cards...
[ 1.144105] isapnp: No Plug & Play device found
[ 1.144183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.144472] Linux agpgart interface v0.103
[ 1.144680] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.145118] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.145122] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.145207] mousedev: PS/2 mouse device common for all mice
[ 1.145427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.145754] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.145817] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.145825] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.145960] NET: Registered protocol family 10
[ 1.146095] mip6: Mobile IPv6
[ 1.146096] NET: Registered protocol family 17
[ 1.146098] mpls_gso: MPLS GSO support
[ 1.146184] microcode: CPU0: patch_level=0x06000626
[ 1.146204] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.146207] Using IPI No-Shortcut mode
[ 1.146274] registered taskstats version 1
[ 1.146283] zswap: loaded using pool lzo/zbud
[ 1.146650] rtc_cmos rtc_cmos: setting system clock to 2017-07-16 13:49:33 UTC (1500212973)
[ 1.146672] PM: Hibernation image not present or could not be loaded.
[ 1.146878] Freeing unused kernel memory: 744K (ca7e1000 - ca89b000)
[ 1.146923] Write protecting the kernel text: 5720k
[ 1.146953] Write protecting the kernel read-only data: 1700k
[ 1.146954] NX-protecting the kernel data: 4520k
[ 1.147060] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.215620] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.215746] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.216102] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.216161] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.216377] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.216428] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.216478] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.216532] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.216586] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.216636] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.234151] SCSI subsystem initialized
[ 1.248891] ACPI: bus type USB registered
[ 1.248911] usbcore: registered new interface driver usbfs
[ 1.248918] usbcore: registered new interface driver hub
[ 1.249036] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[ 1.249304] usbcore: registered new device driver usb
[ 1.249892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.250059] ehci-pci: EHCI PCI platform driver
[ 1.250615] ehci-pci 0000:00:0b.0: EHCI Host Controller
[ 1.250619] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 1.250814] ehci-pci 0000:00:0b.0: irq 19, io mem 0xf0805000
[ 1.251272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.251370] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.251370] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.255484] libata version 3.00 loaded.
[ 1.266652] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.266698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.266700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.266701] usb usb1: Product: EHCI Host Controller
[ 1.266702] usb usb1: Manufacturer: Linux 4.9.0-kali3-686-pae ehci_hcd
[ 1.266703] usb usb1: SerialNumber: 0000:00:0b.0
[ 1.266787] hub 1-0:1.0: USB hub found
[ 1.266791] hub 1-0:1.0: 12 ports detected
[ 1.267959] ohci-pci: OHCI PCI platform driver
[ 1.466823] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 1.638572] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:ec:26:e5
[ 1.638576] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.638595] ata_piix 0000:00:01.1: version 2.13
[ 1.640041] scsi host0: ata_piix
[ 1.640161] scsi host1: ata_piix
[ 1.640194] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.640195] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.640307] ahci 0000:00:0d.0: version 3.0
[ 1.640811] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[ 1.640922] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.640923] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.641737] scsi host2: ahci
[ 1.641787] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
[ 1.642325] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 1.642329] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 1.642385] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
[ 1.704012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.704017] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.704020] usb usb2: Product: OHCI PCI host controller
[ 1.704022] usb usb2: Manufacturer: Linux 4.9.0-kali3-686-pae ohci_hcd
[ 1.704025] usb usb2: SerialNumber: 0000:00:06.0
[ 1.704598] hub 2-0:1.0: USB hub found
[ 1.704866] hub 2-0:1.0: 12 ports detected
[ 1.799680] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.800324] ata2.00: configured for UDMA/33
[ 1.801160] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.957987] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.958104] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.958106] ata3.00: 83886080 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.958257] ata3.00: configured for UDMA/133
[ 1.958415] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.963807] sd 2:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[ 1.963856] sd 2:0:0:0: [sda] Write Protect is off
[ 1.963858] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.963874] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.974918] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.974920] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.975518] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.990604] sda: sda1 sda2 < sda5 >
[ 1.991255] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.022791] random: fast init done
[ 2.151523] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 2.483997] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[ 2.484000] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.484001] usb 2-1: Product: USB Tablet
[ 2.484002] usb 2-1: Manufacturer: VirtualBox
[ 2.491778] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.503884] usbcore: registered new interface driver usbhid
[ 2.503885] usbhid: USB HID core driver
[ 2.510550] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input3
[ 2.510732] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 4.302526] floppy0: no floppy controllers found
[ 4.302617] work still pending
[ 4.341900] PM: Starting manual resume from disk
[ 4.341904] PM: Hibernation image partition 8:5 present
[ 4.341905] PM: Looking for hibernation image.
[ 4.342207] PM: Image not found (code -22)
[ 4.342208] PM: Hibernation image not present or could not be loaded.
[ 5.902593] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x700986ff67d, max_idle_ns: 881590759800 ns
[ 6.268306] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.074676] random: crng init done
[ 7.323748] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.374025] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 7.374062] systemd[1]: Detected virtualization oracle.
[ 7.374066] systemd[1]: Detected architecture x86.
[ 7.383309] systemd[1]: Set hostname to <kali>.
[ 8.036767] systemd[1]: Created slice User and Session Slice.
[ 8.036869] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.036950] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.037001] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.037043] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 8.037078] systemd[1]: Listening on LVM2 poll daemon socket.
[ 8.481999] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.771167] systemd-journald[192]: Received request to flush runtime journal from PID 1
[ 9.357358] vboxguest: loading out-of-tree module taints kernel.
[ 9.370840] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.370844] ACPI: Power Button [PWRF]
[ 9.371169] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
[ 9.371171] ACPI: Sleep Button [SLPF]
[ 9.373011] [drm] Initialized
[ 9.379639] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[ 9.379758] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
[ 9.379865] vboxguest: misc device minor 58, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[ 9.379866] vboxguest: Successfully loaded version 5.1.18_Debian (interface 0x00010004)
[ 9.385617] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.385675] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 9.415456] ACPI: AC Adapter [AC] (on-line)
[ 9.422472] [drm] VRAM 02000000
[ 9.428359] [TTM] Zone kernel: Available graphics memory: 442182 kiB
[ 9.428360] [TTM] Zone highmem: Available graphics memory: 937770 kiB
[ 9.428361] [TTM] Initializing pool allocator
[ 9.428364] [TTM] Initializing DMA pool allocator
[ 9.428598] fbcon: vboxdrmfb (fb0) is primary device
[ 9.450194] Console: switching to colour frame buffer device 100x37
[ 9.451827] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[ 9.451832] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[ 9.482690] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 9.482717] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 9.543202] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.578997] EDAC MC: Ver: 3.0.0
[ 9.582203] MCE: In-kernel MCE decoding enabled.
[ 9.813877] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[ 9.823490] ppdev: user-space parallel port driver
[ 10.325432] Adding 2095100k swap on /dev/sda5. Priority:-1 extents:1 across:2095100k FS
[ 12.494458] floppy0: no floppy controllers found
[ 12.494498] work still pending
[ 13.016280] Bluetooth: Core ver 2.22
[ 13.016432] NET: Registered protocol family 31
[ 13.016432] Bluetooth: HCI device and connection manager initialized
[ 13.016439] Bluetooth: HCI socket layer initialized
[ 13.016440] Bluetooth: L2CAP socket layer initialized
[ 13.016445] Bluetooth: SCO socket layer initialized
[ 13.083569] Netfilter messages via NETLINK v0.30.
[ 13.775694] vboxsf: Successfully loaded version 5.1.18_Debian (interface 0x00010004)
[ 14.065910] VBoxService 5.1.18_Debian r114002 (verbosity: 0) linux.x86 (Mar 15 2017 23:04:58) release log
00:00:00.000343 main Log opened 2017-07-16T13:49:46.419104000Z
[ 14.066145] 00:00:00.000650 main OS Product: Linux
[ 14.066230] 00:00:00.000722 main OS Release: 4.9.0-kali3-686-pae
[ 14.066306] 00:00:00.000810 main OS Version: #1 SMP Debian 4.9.18-1kali1 (2017-04-04)
[ 14.066404] 00:00:00.000880 main Executable: /usr/sbin/VBoxService
00:00:00.000884 main Process ID: 519
00:00:00.000887 main Package type: LINUX_32BITS_GENERIC (OSE)
[ 14.075655] 00:00:00.010008 main 5.1.18_Debian r114002 started. Verbose level = 0
[ 14.206946] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.208753] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.215112] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 14.215415] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.517940] fuse init (API version 7.26)
[ 91.948081] usb 1-1: new high-speed USB device number 3 using ehci-pci
[ 92.294637] usb 1-1: New USB device found, idVendor=2357, idProduct=010c
[ 92.294639] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 92.294640] usb 1-1: Product: 802.11n NIC
[ 92.294641] usb 1-1: Manufacturer: Realtek
[ 92.294642] usb 1-1: SerialNumber: 00E04C0001Offline
#16 2017-07-16 16:11:19
morfik - Cenzor wirtualnego świata
Re: Problem z wykrywaniem Karty sieciowej pod USB.
Zgodnie z tym co pisali na wikidev, to ten adapter w wersji 2 działa na module [b]r8188eu[/b] . Nie wiem czy ten moduł jest w tamtym kernelu i trzeba by to sprawdzić, bo wygląda tak jakby go nie było. U mnie on jest:
Kod:
linux-image-4.11.0-1-amd64: /lib/modules/4.11.0-1-amd64/kernel/drivers/staging/rtl8188eu/r8188eu.ko
A jak go nie ma w tamtym kernelu, to trzeba albo go skompilować ręcznie, albo postarać się o kernel, w którym ten moduł jest.
Offline
#17 2017-07-16 17:04:12
Crossive - Użytkownik
- Crossive
- Użytkownik
- Zarejestrowany: 2017-07-15
Re: Problem z wykrywaniem Karty sieciowej pod USB.
W koncu. Po zainstalowaniu tego modulu ,Dziala. Dziekuje wszystkim za poswiecony czas.
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00011 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00169 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.224.55.63' WHERE u.id=1 |
| 0.00081 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.224.55.63', 1732179190) |
| 0.00064 | SELECT * FROM punbb_online WHERE logged<1732178890 |
| 0.00082 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=29744 AND t.moved_to IS NULL |
| 0.00006 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00267 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=29744 ORDER BY p.id LIMIT 0,25 |
| 0.00144 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=29744 |
| Total query time: 0.00828 s | |