Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Bez powodu, ot tak sobie, i juz.
Help.
lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02) 00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) 00:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0 PCI to PCI bridge (PCI Express GFX port 1) 00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) 00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 1) 00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 2) 00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 3) 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 01:00.0 VGA compatible controller: NVIDIA Corporation NV42GL [Quadro FX 3450/4000 SDI] (rev a2) 02:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09) 04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 05:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 06:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 07:05.0 Multimedia audio controller: Creative Labs EMU10k1 [Sound Blaster Live! Series] (rev 0a) 07:05.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a)
lspci -n 00:00.0 0600: 1002:5a14 (rev 02) 00:02.0 0604: 1002:5a16 00:03.0 0604: 1002:5a17 00:04.0 0604: 1002:5a18 00:05.0 0604: 1002:5a19 00:06.0 0604: 1002:5a1a 00:07.0 0604: 1002:5a1b 00:11.0 0106: 1002:4391 (rev 40) 00:12.0 0c03: 1002:4397 00:12.2 0c03: 1002:4396 00:13.0 0c03: 1002:4397 00:13.2 0c03: 1002:4396 00:14.0 0c05: 1002:4385 (rev 42) 00:14.1 0101: 1002:439c (rev 40) 00:14.2 0403: 1002:4383 (rev 40) 00:14.3 0601: 1002:439d (rev 40) 00:14.4 0604: 1002:4384 (rev 40) 00:14.5 0c03: 1002:4399 00:16.0 0c03: 1002:4397 00:16.2 0c03: 1002:4396 00:18.0 0600: 1022:1600 00:18.1 0600: 1022:1601 00:18.2 0600: 1022:1602 00:18.3 0600: 1022:1603 00:18.4 0600: 1022:1604 00:18.5 0600: 1022:1605 01:00.0 0300: 10de:00cd (rev a2) 02:00.0 0107: 1000:0072 (rev 03) 03:00.0 0200: 10ec:8168 (rev 09) 04:00.0 0c03: 1b21:1042 05:00.0 0106: 1b21:0612 (rev 01) 06:00.0 0c03: 1b21:1042 07:05.0 0401: 1102:0002 (rev 0a) 07:05.1 0980: 1102:7002 (rev 0a)
cat /proc/asound/cards 0 [Live ]: EMU10K1 - SB Live! Value [CT4780] SB Live! Value [CT4780] (rev.10, serial:0x80221102) at 0xb000, irq 20 1 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xfe600000 irq 16
cat /proc/asound/modules 0 snd_emu10k1 1 snd_hda_intel
cat /proc/asound/version Advanced Linux Sound Architecture Driver Version k4.13.0-36-generic.
uname -a Linux robin-desktop 4.13.0-36-generic #40-Ubuntu SMP Fri Feb 16 20:07:48 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
dpkg -l | grep alsa ii alsa-base 1.0.25+dfsg-0ubuntu5 all ALSA driver configuration files ii alsa-utils 1.1.3-1ubuntu1 amd64 Utilities for configuring and using ALSA ii gstreamer1.0-alsa:amd64 1.12.3-1 amd64 GStreamer plugin for ALSA
robin@robin-desktop:~$ dpkg -l | grep pulse ii gstreamer1.0-pulseaudio:amd64 1.12.3-1ubuntu1 amd64 GStreamer plugin for PulseAudio ii libpulse-mainloop-glib0:amd64 1:10.0-2ubuntu3.1 amd64 PulseAudio client libraries (glib support) ii libpulse0:amd64 1:10.0-2ubuntu3.1 amd64 PulseAudio client libraries ii libpulsedsp:amd64 1:10.0-2ubuntu3.1 amd64 PulseAudio OSS pre-load library ii pulseaudio 1:10.0-2ubuntu3.1 amd64 PulseAudio sound server ii pulseaudio-utils 1:10.0-2ubuntu3.1 amd64 Command line tools for the PulseAudio sound server
Ostatnio edytowany przez Novi-cjusz (2018-03-14 19:57:32)
Offline
Znowu to pewnie Pulsaudio zdechło (co w ubuntu już praktycznie nie jest błędem tylko featurą), albo koza zjadła jakieś pliki konfiguracyjne.
Dawaj pełne wyjście skryptu alsa-info:
https://forum.dug.net.pl/viewtopic.php?pid=164151#p164151
A poza tym ten wątek masz w złym dziale.
Ostatnio edytowany przez Jacekalex (2018-03-14 03:33:33)
Offline
Skrypt uploadowalem na serwer wczoraj a dzisiaj jeszcze tak: http://dpaste.com/167H6W6
Offline
W wyniku stoi jak byk:
Kod:
Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes[/quote]
Więc zobacz w ustawieniach Pulse, o co chodzi.
Chociaż w Ubuntu 17.10 były jakieś problemy z Pulse,
na forum Ubuntu też jeden gostek ma z tym gimnastykę od chyba tygodnia.
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
W ustawieniach probowalem wszystkiego.
Samo Pulse jest nie tylko zrabane ale i skomplikowane.
[url=https://postimg.org/image/9djdkl2cr/][img]https://s17.postimg.org/9djdkl2cr/pulseaudio-diagram.png[/img][/url]
Ten gosc na forum Ubuntu tez nie znalazl rozwiazania.
journalctl /usr/bin/pulseaudio Mar 14 07:45:08 robin-desktop pulseaudio[1593]: [pulseaudio] sink.c: Default and alternate sample rates are the same. Mar 14 08:30:41 robin-desktop pulseaudio[1593]: [alsa-sink-emu10k1 efx] alsa-sink.c: snd_pcm_rewind() failed: Invalid argument Mar 14 08:30:41 robin-desktop pulseaudio[1593]: [alsa-sink-emu10k1 efx] alsa-sink.c: process_rewind: Invalid argument Mar 14 09:13:01 robin-desktop pulseaudio[12545]: [pulseaudio] sink.c: Default and alternate sample rates are the same. Mar 14 09:13:32 robin-desktop pulseaudio[12545]: [alsa-sink-emu10k1 efx] alsa-sink.c: snd_pcm_rewind() failed: Invalid argument Mar 14 09:13:32 robin-desktop pulseaudio[12545]: [alsa-sink-emu10k1 efx] alsa-sink.c: process_rewind: Invalid argument Mar 14 09:13:32 robin-desktop pulseaudio[12545]: [pulseaudio] protocol-native.c: protocol error, kicking client Mar 14 09:29:26 robin-desktop pulseaudio[14492]: [pulseaudio] sink.c: Default and alternate sample rates are the same. Mar 14 09:29:30 robin-desktop pulseaudio[14501]: Daemon already running. Mar 14 09:35:53 robin-desktop pulseaudio[14492]: [alsa-sink-emu10k1 efx] alsa-sink.c: snd_pcm_rewind() failed: Invalid argument Mar 14 09:35:53 robin-desktop pulseaudio[14492]: [alsa-sink-emu10k1 efx] alsa-sink.c: process_rewind: Invalid argument Mar 14 09:40:43 robin-desktop pulseaudio[20582]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
ps aux | grep pulse robin 20582 0.1 0.0 956472 12360 ? S<l 09:40 0:00 /usr/bin/pulseaudio --start --log-target=syslog robin 20600 0.0 0.0 67972 5560 pts/1 S+ 09:42 0:00 journalctl /usr/bin/pulseaudio robin 20643 0.0 0.0 14352 1172 pts/0 S+ 09:44 0:00 grep --color=auto pulse
Ostatnio edytowany przez Novi-cjusz (2018-03-14 10:46:23)
Offline
To spróbuj wywalić konfigurację z /etc/pulse i $HOME/.pulse, i odpalić go na nowo.
Albo wywalić Pulseaudio, wrzucić bibliotekę apulse i zostać na samej Alsie z apulse dla programów wymagających pulseaudio.
Troszkę trudniejsze w konfiguracji rozwiązanie ale jak już ruszy, bardzie stabilne i przewidywalne.
Offline
Robie w/g tego. https://www.hecticgeek.com/2012/01/how-to-remove-pulseaudio-use-alsa-ubuntu-linux/
Offline
Moduł emu10k1 zwraca błąd nie działającej opcji [tt]rewind operation for EFX streams[/tt] i dlatego PA nie może się uruchomić poprawnie.
Offline
Jakie jest na to lekarstwo ?
Zapodalem:
sudo apt purge pulseaudio -y; sudo apt install pulseaudio
journalctl /usr/bin/pulseaudio Mar 14 10:30:46 robin-desktop pulseaudio[3454]: [pulseaudio] sink.c: Default and alternate sample rates are the same. Mar 14 10:32:41 robin-desktop pulseaudio[3454]: [pulseaudio] sink.c: Default and alternate sample rates are the same. Mar 14 10:32:47 robin-desktop pulseaudio[3454]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Ostatnio edytowany przez Novi-cjusz (2018-03-14 11:46:51)
Offline
Jeżeli dobrze kojarzę to szukaj pod hasłem
iommu=pt
Offline
start-pulseaudio-x11 Failure: Module initialization failed
pactl list cards short 0 alsa_card.pci-0000_00_14.2 module-alsa-card.c
pulseaudio -k;pulseaudio --start --verbose I: [pulseaudio] main.c: Daemon startup successful.
fuser -v /dev/snd/* USER PID ACCESS COMMAND /dev/snd/controlC1: robin 2255 F.... pulseaudio /dev/snd/pcmC1D1p: robin 2255 F...m pulseaudio
Ostatnio edytowany przez Novi-cjusz (2018-03-14 13:11:23)
Offline
Wyłącz na chwilę pulse:
pulseaudio -k
o sprawdź czy na kartach jest dźwięk [b]speaker-test[/b]em
https://www.systutorials.com/docs/linux/man/1-speaker-test/
Offline
Nic nie ma - glucho.
sudo start-pulseaudio-x11 [sudo] password for robin: Home directory not accessible: Permission denied Connection failure: Connection refused pa_context_connect() failed: Connection refused
ls -la /home/ total 12 drwxr-xr-x 3 root root 4096 Jan 13 12:39 . drwxr-xr-x 24 root root 4096 Feb 24 11:15 .. drwxr-xr-x 35 robin robin 4096 Mar 14 11:29 robin
Zrobilem:
sudo chown -R robin:robin /home/robin
Nie pomoglo.
Nie wiem czy ten watek: https://ubuntuforums.org/showthread.php?p=6208727 nie jest za stary ?
systemctl status --user pulseaudio.service ● pulseaudio.service - Sound Service Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; disabled; vendor pr Active: inactive (dead)
Ostatnio edytowany przez Novi-cjusz (2018-03-14 13:59:41)
Offline
Może bzdura, nie chce mi się teraz szukać źródła, ale czy próbowałeś z tym dźwiękiem dopisać w
/etc/default/grub
to "[b]iommu=pt[/b]"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash iommu=pt"
[b]PS[/b] Przy 4-czterech wirkach pamiętasz o
sudo update-grub
Ostatnio edytowany przez ciastek1981 (2018-03-15 23:54:25)
Offline
Przeinstalowalem na Ubuntu 16.04 Xenial.
Znowu nie ma dzwieku bo:
mam 2 karty:
cat /proc/asound/cards 0 [Live ]: EMU10K1 - SB Live! Value [CT4780] SB Live! Value [CT4780] (rev.10, serial:0x80221102) at 0xb000, irq 20 1 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xfe600000 irq 16
Mam domyslna integre, staralem sie wymusic zamiane miejscami.
cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 options snd-emu10k1 index=0 options snd-hda-intel index=1 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2
Niestety mimo konfigu Pulse widzi tylko integre i ignoruje:
0 [Live ]: EMU10K1 - SB Live! Value [CT4780] SB Live! Value [CT4780] (rev.10, serial:0x80221102) at 0xb000, irq 20
Co zrobic zeby "Output device" bylo EMU10K1 - SB Live! ??????
Ostatnio edytowany przez Novi-cjusz (2018-03-16 01:37:08)
Offline
Uroczyście pożegnać Buntu, i zostać na stabilnym Debianie.
To na początek.
Buntu często dostarcza rozmaitych emocji, nierzadko nieznanych w innych Linuxach.
Ostatnio edytowany przez Jacekalex (2018-03-16 07:20:18)
Offline
@Jack Pitolisz ;) Chociaż jest dziwna prawidłowość np. z klonami Xubuntu mam mniej problemów z niż z czystym Xubuntu bo tam np. apt jest zwalone.
@Czterowirkowy
Zobacz [b]np.[/b] jeszcze to http://whiteboard.ping.se/Linux/IOMMU Gdzieś to było [b]wyjaśnione[/b] i [b]opisane[/b]. Szukać mi się nie chce bo jest google.
W mojej ściądze mam jeszcze takie hasła [b]"emu10k1 periods_min = 2"[/b] i przełączyć na analog cokolwiek co znaczy ;)
Dobra więcej bzdur nie piszę bo mi się nawet nie chce czytać tych logów ;)
Ostatnio edytowany przez ciastek1981 (2018-03-16 10:29:28)
Offline
@Novi-cjusz:
Może zacznij w końcu pisać do rzeczy.
Mam domyslna integre, staralem sie wymusic zamiane miejscami.[/quote]
i w tym samym momencie:mam 2 karty:
Kod:
cat /proc/asound/cards 0 [Live ]: EMU10K1 - SB Live! Value [CT4780] SB Live! Value [CT4780] (rev.10, serial:0x80221102) at 0xb000, irq 20 1 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xfe600000 irq 16[/quote]
Przecież to jakiś bezsensowny bełkot.
Masz teraz PA uruchomione i działające?
Gdzie jakieś szczegóły konfiguracji lub logi?Offline
To nie belkot - to Ubuntu reality.
Pavucontrol pokazuje jako "output device" tylko HDA-Intel.
Nie pokazuje karty: EMU10K1 ktora idzie na glosniki.
w tym jest problem.
Polecenie listujace karty - tak ja wyzej.
PA jest uruchomione, ale dzwieku brak.
Konfig alsa-base.conf jest powyzej.
cat /etc/pulse/default.pa #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .nofail ### Load something into the sample cache #load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga #load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga #load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga #load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active #load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. ### Load X11 bell module #load-module module-x11-bell sample=x11-bell ### Register ourselves in the X11 session manager #load-module module-x11-xsmp ### Publish connection data in the X11 root window #.ifexists module-x11-publish.so #.nofail #load-module module-x11-publish #.fail #.endif ### Make some devices default #set-default-sink output #set-default-source input
Errors:
pulseaudio -vv I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us. D: [pulseaudio] core-util.c: RealtimeKit worked. I: [pulseaudio] core-util.c: Successfully gained nice level -11. I: [pulseaudio] main.c: This is PulseAudio 8.0 D: [pulseaudio] main.c: Compilation host: x86_64-pc-linux-gnu D: [pulseaudio] main.c: Compilation CFLAGS: -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -Wextra -pipe -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto D: [pulseaudio] main.c: Running on host: Linux x86_64 4.13.0-36-generic #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 D: [pulseaudio] main.c: Found 8 CPUs. I: [pulseaudio] main.c: Page size is 4096 bytes D: [pulseaudio] main.c: Compiled with Valgrind support: no D: [pulseaudio] main.c: Running in valgrind mode: no D: [pulseaudio] main.c: Running in VM: no D: [pulseaudio] main.c: Optimized build: yes D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled. I: [pulseaudio] main.c: Machine ID is ad61fb852278471cadeff63bfa468692. I: [pulseaudio] main.c: Session ID is c1. I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse. I: [pulseaudio] main.c: Using state directory /home/robin/.config/pulse. I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-8.0/modules. I: [pulseaudio] main.c: Running in system mode: no E: [pulseaudio] pid.c: Daemon already running. E: [pulseaudio] main.c: pa_pid_file_create() failed.
Tutaj jest wiecej.
journalctl -xb -p err -- Logs begin at Fri 2018-03-16 14:57:58 GMT, end at Fri 2018-03-16 16:10:05 GMT Mar 16 14:57:58 robin-desktop kernel: sd 7:0:0:0: [sda] No Caching mode page fou Mar 16 14:57:58 robin-desktop kernel: sd 7:0:0:0: [sda] Assuming drive cache: wr Mar 16 14:58:07 robin-desktop NetworkManager[930]: nm_device_get_device_type: as Mar 16 14:58:36 robin-desktop pulseaudio[1591]: [pulseaudio] bluez5-util.c: GetM Mar 16 15:14:04 robin-desktop pulseaudio[1591]: [alsa-sink-emu10k1 efx] alsa-sin Mar 16 15:14:04 robin-desktop pulseaudio[1591]: [alsa-sink-emu10k1 efx] alsa-sin Mar 16 15:36:45 robin-desktop pulseaudio[3888]: [pulseaudio] pid.c: Daemon alrea Mar 16 15:37:10 robin-desktop pulseaudio[3880]: GetManagedObjects() failed: org. Mar 16 16:01:13 robin-desktop pulseaudio[3880]: snd_pcm_rewind() failed: Invalid Mar 16 16:01:13 robin-desktop pulseaudio[3880]: process_rewind: Invalid argument lines 1-11/11 (END)...skipping... -- Logs begin at Fri 2018-03-16 14:57:58 GMT, end at Fri 2018-03-16 16:10:05 GMT Mar 16 14:57:58 robin-desktop kernel: sd 7:0:0:0: [sda] No Caching mode page fou Mar 16 14:57:58 robin-desktop kernel: sd 7:0:0:0: [sda] Assuming drive cache: wr Mar 16 14:58:07 robin-desktop NetworkManager[930]: nm_device_get_device_type: as Mar 16 14:58:36 robin-desktop pulseaudio[1591]: [pulseaudio] bluez5-util.c: GetM Mar 16 15:14:04 robin-desktop pulseaudio[1591]: [alsa-sink-emu10k1 efx] alsa-sin Mar 16 15:14:04 robin-desktop pulseaudio[1591]: [alsa-sink-emu10k1 efx] alsa-sin Mar 16 15:36:45 robin-desktop pulseaudio[3888]: [pulseaudio] pid.c: Daemon alrea Mar 16 15:37:10 robin-desktop pulseaudio[3880]: GetManagedObjects() failed: org. Mar 16 16:01:13 robin-desktop pulseaudio[3880]: snd_pcm_rewind() failed: Invalid Mar 16 16:01:13 robin-desktop pulseaudio[3880]: process_rewind: Invalid argument ~ lines 1-11/11 (END)...skipping... -- Logs begin at Fri 2018-03-16 14:57:58 GMT, end at Fri 2018-03-16 16:10:05 GMT. -- Mar 16 14:57:58 robin-desktop kernel: sd 7:0:0:0: [sda] No Caching mode page found Mar 16 14:57:58 robin-desktop kernel: sd 7:0:0:0: [sda] Assuming drive cache: write through Mar 16 14:58:07 robin-desktop NetworkManager[930]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed Mar 16 14:58:36 robin-desktop pulseaudio[1591]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out Mar 16 15:14:04 robin-desktop pulseaudio[1591]: [alsa-sink-emu10k1 efx] alsa-sink.c: snd_pcm_rewind() failed: Invalid argument Mar 16 15:14:04 robin-desktop pulseaudio[1591]: [alsa-sink-emu10k1 efx] alsa-sink.c: process_rewind: Invalid argument Mar 16 15:36:45 robin-desktop pulseaudio[3888]: [pulseaudio] pid.c: Daemon already running. Mar 16 15:37:10 robin-desktop pulseaudio[3880]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a repl Mar 16 16:01:13 robin-desktop pulseaudio[3880]: snd_pcm_rewind() failed: Invalid argument Mar 16 16:01:13 robin-desktop pulseaudio[3880]: process_rewind: Invalid argument
Ostatnio edytowany przez Novi-cjusz (2018-03-16 17:29:26)
Offline
[quote=morfik]Co to za jakiś dinozaur? xD
I: [pulseaudio] main.c: This is PulseAudio [b]8.0[/b][/quote]
Przecie teraz już jest v11[/quote]
Nie Dinozaur tylko Ubuntu 16.04 albo 17.10, nie wiem już które @Novi* ma w kompie.
Wyjście jest pewnie z 16.04 LTS, a utrzymywanie dziurawej wersji PA-8.0 to właśnie legendarny "Long Time Support" ... xD
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
@morfik
Sprawdz ile jest stron internetowych z prosba o pomoc w naprawie Pulse, mnostwo.
A ile zawiera rozwiazanie problemu, prawie zadna.
Pulse to lamiglowka "tylko dla orlow"
Zastanawiam sie jakie skutki przyniesie taka komenda:
apt-get install --only-upgrade pulseaudio
No i juz wiemy, aktualizacja systemu nic nie da.
apt-get install --only-upgrade pulseaudio Reading package lists... Done Building dependency tree Reading state information... Done pulseaudio is already the newest version (1:8.0-0ubuntu3.8). 0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded. root@robin-desktop:/home/robin# sudo apt update Hit:1 http://ie.archive.ubuntu.com/ubuntu xenial InRelease Hit:2 http://ie.archive.ubuntu.com/ubuntu xenial-updates InRelease Hit:3 http://ie.archive.ubuntu.com/ubuntu xenial-backports InRelease Get:4 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB] Get:5 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [464 kB] Get:6 http://security.ubuntu.com/ubuntu xenial-security/main i386 Packages [418 kB] Get:7 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [323 kB] Get:8 http://security.ubuntu.com/ubuntu xenial-security/universe i386 Packages [282 kB] Fetched 1,589 kB in 2s (778 kB/s) Reading package lists... Done Building dependency tree Reading state information... Done 40 packages can be upgraded. Run 'apt list --upgradable' to see them. root@robin-desktop:/home/robin# apt list --upgradable Listing... Done apparmor/xenial-updates 2.10.95-0ubuntu2.9 amd64 [upgradable from: 2.10.95-0ubuntu2.8] bamfdaemon/xenial-updates 0.5.3~bzr0+16.04.20180209-0ubuntu1 amd64 [upgradable from: 0.5.3~bzr0+16.04.20160824-0ubuntu1] compiz/xenial-updates,xenial-updates 1:0.9.12.3+16.04.20180221-0ubuntu1 all [upgradable from: 1:0.9.12.3+16.04.20171116-0ubuntu1] compiz-core/xenial-updates 1:0.9.12.3+16.04.20180221-0ubuntu1 amd64 [upgradable from: 1:0.9.12.3+16.04.20171116-0ubuntu1] compiz-gnome/xenial-updates 1:0.9.12.3+16.04.20180221-0ubuntu1 amd64 [upgradable from: 1:0.9.12.3+16.04.20171116-0ubuntu1] compiz-plugins-default/xenial-updates 1:0.9.12.3+16.04.20180221-0ubuntu1 amd64 [upgradable from: 1:0.9.12.3+16.04.20171116-0ubuntu1] dpkg/xenial-updates 1.18.4ubuntu1.4 amd64 [upgradable from: 1.18.4ubuntu1.3] dpkg-dev/xenial-updates,xenial-updates 1.18.4ubuntu1.4 all [upgradable from: 1.18.4ubuntu1.3] firefox/xenial-security 59.0.1+build1-0ubuntu0.16.04.1 amd64 [upgradable from: 58.0.2+build1-0ubuntu0.16.04.1] firefox-locale-en/xenial-security 59.0.1+build1-0ubuntu0.16.04.1 amd64 [upgradable from: 59.0+build5-0ubuntu0.16.04.1] friendly-recovery/xenial-updates,xenial-updates 0.2.31ubuntu1 all [upgradable from: 0.2.31] fwupd/xenial-updates 0.8.3-0ubuntu2 amd64 [upgradable from: 0.7.0-0ubuntu4.3] gnome-accessibility-themes/xenial-updates,xenial-updates 3.18.0-2ubuntu2 all [upgradable from: 3.18.0-2ubuntu1] isc-dhcp-client/xenial-updates 4.3.3-5ubuntu12.10 amd64 [upgradable from: 4.3.3-5ubuntu12.7] isc-dhcp-common/xenial-updates 4.3.3-5ubuntu12.10 amd64 [upgradable from: 4.3.3-5ubuntu12.7] libapparmor-perl/xenial-updates 2.10.95-0ubuntu2.9 amd64 [upgradable from: 2.10.95-0ubuntu2.8] libapparmor1/xenial-updates 2.10.95-0ubuntu2.9 amd64 [upgradable from: 2.10.95-0ubuntu2.8] libbamf3-2/xenial-updates 0.5.3~bzr0+16.04.20180209-0ubuntu1 amd64 [upgradable from: 0.5.3~bzr0+16.04.20160824-0ubuntu1] libcompizconfig0/xenial-updates 1:0.9.12.3+16.04.20180221-0ubuntu1 amd64 [upgradable from: 1:0.9.12.3+16.04.20171116-0ubuntu1] libcurl3/xenial-updates,xenial-security 7.47.0-1ubuntu2.7 amd64 [upgradable from: 7.47.0-1ubuntu2.6] libcurl3-gnutls/xenial-updates,xenial-security 7.47.0-1ubuntu2.7 amd64 [upgradable from: 7.47.0-1ubuntu2.6] libdecoration0/xenial-updates 1:0.9.12.3+16.04.20180221-0ubuntu1 amd64 [upgradable from: 1:0.9.12.3+16.04.20171116-0ubuntu1] libdfu1/xenial-updates 0.8.3-0ubuntu2 amd64 [upgradable from: 0.7.0-0ubuntu4.3] libdpkg-perl/xenial-updates,xenial-updates 1.18.4ubuntu1.4 all [upgradable from: 1.18.4ubuntu1.3] libfwupd1/xenial-updates 0.8.3-0ubuntu2 amd64 [upgradable from: 0.7.0-0ubuntu4.3] libgcrypt20/xenial-updates 1.6.5-2ubuntu0.4 amd64 [upgradable from: 1.6.5-2ubuntu0.3] libsmbclient/xenial-updates,xenial-security 2:4.3.11+dfsg-0ubuntu0.16.04.13 amd64 [upgradable from: 2:4.3.11+dfsg-0ubuntu0.16.04.12] libsnmp-base/xenial-updates,xenial-updates 5.7.3+dfsg-1ubuntu4.1 all [upgradable from: 5.7.3+dfsg-1ubuntu4] libsnmp30/xenial-updates 5.7.3+dfsg-1ubuntu4.1 amd64 [upgradable from: 5.7.3+dfsg-1ubuntu4] libunity-core-6.0-9/xenial-updates 7.4.5+16.04.20180221-0ubuntu1 amd64 [upgradable from: 7.4.5+16.04.20171201.3] libwbclient0/xenial-updates,xenial-security 2:4.3.11+dfsg-0ubuntu0.16.04.13 amd64 [upgradable from: 2:4.3.11+dfsg-0ubuntu0.16.04.12] linux-generic-hwe-16.04/xenial-updates,xenial-security 4.13.0.37.56 amd64 [upgradable from: 4.13.0.36.55] linux-headers-generic-hwe-16.04/xenial-updates,xenial-security 4.13.0.37.56 amd64 [upgradable from: 4.13.0.36.55] linux-image-generic-hwe-16.04/xenial-updates,xenial-security 4.13.0.37.56 amd64 [upgradable from: 4.13.0.36.55] samba-libs/xenial-updates,xenial-security 2:4.3.11+dfsg-0ubuntu0.16.04.13 amd64 [upgradable from: 2:4.3.11+dfsg-0ubuntu0.16.04.12] unity/xenial-updates 7.4.5+16.04.20180221-0ubuntu1 amd64 [upgradable from: 7.4.5+16.04.20171201.3] unity-schemas/xenial-updates,xenial-updates 7.4.5+16.04.20180221-0ubuntu1 all [upgradable from: 7.4.5+16.04.20171201.3] unity-services/xenial-updates 7.4.5+16.04.20180221-0ubuntu1 amd64 [upgradable from: 7.4.5+16.04.20171201.3] update-notifier/xenial-updates 3.168.8 amd64 [upgradable from: 3.168.7] update-notifier-common/xenial-updates,xenial-updates 3.168.8 all [upgradable from: 3.168.7]
Ostatnio edytowany przez Novi-cjusz (2018-03-16 18:41:18)
Offline
[quote=Novi-cjusz]Tutaj jest wiecej.[/quote]
Przecież bezmyślnie poucinałeś komunikaty.
Pulse to lamiglowka "tylko dla orlow"[/quote]
Kusiło by to dosadniej skomentować, ale przez grzeczność się powstrzymałem…
Offline
Twoje wpisy oprocz impertynencji nic nie wnosza.
Zachowaj je dla siebie.
Offline
Time (s) | Query |
---|---|
0.00010 | SET CHARSET latin2 |
0.00005 | SET NAMES latin2 |
0.00128 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.119.213.36' WHERE u.id=1 |
0.00092 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.119.213.36', 1733244224) |
0.00021 | SELECT * FROM punbb_online WHERE logged<1733243924 |
0.00071 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=30357 AND t.moved_to IS NULL |
0.00005 | SELECT search_for, replace_with FROM punbb_censoring |
0.00218 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=30357 ORDER BY p.id LIMIT 0,25 |
0.00091 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=30357 |
Total query time: 0.00641 s |