Forum Debian Users Gang

nocturn · 2009-06-26 14:07:23

Witam
Wczoraj skompilowalem ze zrodelm mplayera. Zrobilem wszystko wg instruckji. W katalogu /usr/lib stworzylem katalog codecs, do ktorego rozpakowalem kodeki. Nastepnie wydalem polecenie

Kod:

./configure --language=pl --enable-gui

Jako, ze nei bylo zadnych bledow to nastepnie wpisalem

Kod:

make
make install

Potem do katalogu /home/nocturn/.mplayer przekopiowalem pliki codecs.conf i input.conf
Wszystko ladnie pieknie i mplayer ladnie smiga. Jednakze, chcialem rowniez miec wersje okienkowa. Wiec sciagnalem sobie skorke i odpalilem gmplayera. Pojawia sie okienko i wszystko ladnie pieknie wyglada, jednakze nie moge odtwarzac zadnych filmow gdyz wyrzuca blad

Kod:

Blad przy otwieraniu/inicjalizacji wybranego urzadzenia video (-vo)

WYdaje mi sie to co najmniej dziwne, skoro gmplayer to tylko nakladka graficzna na mplayera wiec ustawienia konfiguracyjne powinein miec takie same.
Aha w katalogu /home/nocturn/.mplayer znajduje sie plik konfiguracyjny config, jednak jest on pusty. Znajduje sie tam rowniez plik konfiguracyjny gui.conf, ktorego zawartosc wyglada nastepujaco.

Kod:

enable_audio_equ = "no"
vo_panscan = "0.000000"
vo_doublebuffering = "yes"
vo_direct_render = "no"
v_framedrop = "0"
v_flip = "-1"
v_ni = "no"
v_idx = "-1"
vf_pp = "no"
vf_autoq = "0"
vf_lavc = "no"
ao_volnorm = "no"
softvol = "no"
ao_surround = "no"
ao_extra_stereo = "no"
ao_extra_stereo_coefficient = "1.000000"
osd_level = "1"
sub_auto_load = "yes"
sub_unicode = "no"
ass_enabled = "no"
ass_use_margins = "no"
ass_top_margin = "0"
ass_bottom_margin = "0"
sub_pos = "100"
sub_overlap = "no"
font_factor = "0.750000"
font_text_scale = "5.000000"
font_osd_scale = "6.000000"
font_blur = "2.000000"
font_outline = "2.000000"
font_autoscale = "3"
cache = "no"
cache_size = "2048"
playbar = "yes"
load_fullscreen = "no"
show_videowin = "yes"
stopxscreensaver = "no"
autosync = "no"
autosync_size = "0"
gui_skin = "Ater"
gui_save_pos = "yes"
gui_main_pos_x = "631"
gui_main_pos_y = "624"
gui_video_out_pos_x = "192"
gui_video_out_pos_y = "144"
equ_band_00 = "0.000000"
equ_band_01 = "0.000000"
equ_band_02 = "0.000000"
equ_band_03 = "0.000000"
equ_band_04 = "0.000000"
equ_band_05 = "0.000000"
equ_band_06 = "0.000000"
equ_band_07 = "0.000000"
equ_band_08 = "0.000000"
equ_band_09 = "0.000000"
equ_band_10 = "0.000000"
equ_band_11 = "0.000000"
equ_band_12 = "0.000000"
equ_band_13 = "0.000000"
equ_band_14 = "0.000000"
equ_band_15 = "0.000000"
equ_band_16 = "0.000000"
equ_band_17 = "0.000000"
equ_band_18 = "0.000000"
equ_band_19 = "0.000000"
equ_band_20 = "0.000000"
equ_band_21 = "0.000000"
equ_band_22 = "0.000000"
equ_band_23 = "0.000000"
equ_band_24 = "0.000000"
equ_band_25 = "0.000000"
equ_band_26 = "0.000000"
equ_band_27 = "0.000000"
equ_band_28 = "0.000000"
equ_band_29 = "0.000000"
equ_band_30 = "0.000000"
equ_band_31 = "0.000000"
equ_band_32 = "0.000000"
equ_band_33 = "0.000000"
equ_band_34 = "0.000000"
equ_band_35 = "0.000000"
equ_band_36 = "0.000000"
equ_band_37 = "0.000000"
equ_band_38 = "0.000000"
equ_band_39 = "0.000000"
equ_band_40 = "0.000000"
equ_band_41 = "0.000000"
equ_band_42 = "0.000000"
equ_band_43 = "0.000000"
equ_band_44 = "0.000000"
equ_band_45 = "0.000000"
equ_band_46 = "0.000000"
equ_band_47 = "0.000000"
equ_band_48 = "0.000000"
equ_band_49 = "0.000000"
equ_band_50 = "0.000000"
equ_band_51 = "0.000000"
equ_band_52 = "0.000000"
equ_band_53 = "0.000000"
equ_band_54 = "0.000000"
equ_band_55 = "0.000000"
equ_band_56 = "0.000000"
equ_band_57 = "0.000000"
equ_band_58 = "0.000000"
equ_band_59 = "0.000000"

ilin · 2009-06-26 14:16:14

To co najważniejsze w tym logu obciąleś. :)

Ustaw sobie sterownik video w gmplayerze na taki jakiego mplayer używa.
Mozesz to wyklikać.

Domyślam się ze musisz ustawić na x11.
Pewnie nie mialeś odpowiednich bibliotek przy kompilacji aby inne sterowniki skompilować.
Trzeba czytać co configure na koniec wypluwa jakie są dostępne wyjscia video i kodeki.

Ostatnio edytowany przez ilin (2009-06-26 14:16:48)

nocturn · 2009-06-26 14:47:41

Wlasnie, ale jak mam sprawdzic jakiego kodeka uzywa mplayer skoro wszystkie configi mplayera sa puste ?
Tutaj wyjscie na konsoli z gmplayer -v film

Kod:

CPU: Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz (Family: 6, Model: 15, Stepping: 13)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Skompilowano dla procesora x86 z rozszerzeniami: MMX MMX2 SSE SSE2
The -gui option will only work as the first command line argument.
X11 opening display: :0.0
vo: X11 color mask:  FFFF  (R:F800 G:7E0 B:1F)
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Current fstype setting honours FULLSCREEN ABOVE BELOW X atoms
Adding filename Scrubs_S1E15.avi && pathname /home/nocturn/Desktop
get_path('codecs.conf') -> '/home/nocturn/.mplayer/codecs.conf'
Wczytuję /home/nocturn/.mplayer/codecs.conf: kodeki audio 115 & video 237
Configuration: --language=pl --enable-gui
WierszPoleceń: '-v' 'Scrubs_S1E15.avi'
init_freetype
get_path('font/font.desc') -> '/home/nocturn/.mplayer/font/font.desc'
font: can't open file: /home/nocturn/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/nocturn/.mplayer/fonts'
Using nanosleep() timing
get_path('input.conf') -> '/home/nocturn/.mplayer/input.conf'
Parsing input config file /home/nocturn/.mplayer/input.conf
Input config file /home/nocturn/.mplayer/input.conf parsed: 81 binds
vo: X11 truecolor visual 0x22, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x23, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x24, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x25, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x3e, depth 32, R:FF0000 G:FF00 B:FF
get_path('skins') -> '/home/nocturn/.mplayer/skins'
get_path('Skin') -> '/home/nocturn/.mplayer/Skin'
SKIN dir 1: '/home/nocturn/.mplayer/skins'
SKIN dir 1 (obsolete): '/home/nocturn/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/skins'
SKIN dir 2 (obsolete): '/usr/local/share/mplayer/Skin'
vo: X11 truecolor visual 0x22, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x23, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x24, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x25, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x3e, depth 32, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x22, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x23, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x24, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x25, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x3e, depth 32, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x22, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x23, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x24, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x25, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x3e, depth 32, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x22, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x23, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x24, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x25, depth 16, R:F800 G:7E0 B:1F
vo: X11 truecolor visual 0x3e, depth 32, R:FF0000 G:FF00 B:FF
get_path('subfont.ttf') -> '/home/nocturn/.mplayer/subfont.ttf'
[x11] NET style stay on top (layer 0). Using state _NET_WM_STATE_ABOVE.
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
get_path('Scrubs_S1E15.avi.conf') -> '/home/nocturn/.mplayer/Scrubs_S1E15.avi.conf'
get_path('subfont.ttf') -> '/home/nocturn/.mplayer/subfont.ttf'
[x11] NET style stay on top (layer 0). Using state _NET_WM_STATE_ABOVE.
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.

Odtwarzam /home/nocturn/Desktop/Scrubs_S1E15.avi.
get_path('sub/') -> '/home/nocturn/.mplayer/sub/'
[file] File size is 183316480 bytes
STREAM: [file] /home/nocturn/Desktop/Scrubs_S1E15.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
LAVF_check: avi format
Wykryto format pliku AVI.
list_end=0x2292
======= AVI Header =======
us/frame: 40000  (fps=25.000)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames  total: 40765   initial: 0
streams: 2
Suggested BufferSize: 0
Size:  512 x 368
==========================
list_end=0x10F4
==> Znalazłem strumień video: 0
[aviheader] Video stream found, -vid 0
====== STREAM Header =====
Type: vids   FCC: xvid (64697678)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 0
Rate: 25/1 = 25.000
Start: 0   Len: 40765
Suggested BufferSize: 24793
Quality -1
Sample size: 0
==========================
Znalazłem 'bih', 40 bajtów z 40
======= VIDEO Format ======
  biSize 40
  biWidth 512
  biHeight 368
  biPlanes 1
  biBitCount 12
  biCompression 1145656920='XVID'
  biSizeImage 1130496
===========================
Regeneruję tabelę klatek kluczowych dla MPEG-4 video.
list_end=0x2186
==> Znalazłem strumień audio: 1
[aviheader] Audio stream found, -aid 1
====== STREAM Header =====
Type: auds   FCC:  (0)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 1
Rate: 16000/384 = 41.667
Start: 0   Len: 67942
Suggested BufferSize: 8064
Quality -1
Sample size: 384
==========================
Znalazłem 'wf', 30 bajtów z 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 16000
Block align: 384
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=384
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
==========================================================================
list_end=0x2292
AVI: znalazłem dmlh (rozmiar=248) (razem_klatek=40765)
list_end=0x22D0
hdr=Software  size=42
Software  : FairUse Wizard - http://fairusewizard.com
list_end=0xAD94614
Znalazłem film na pozycji 0x280C - 0xAD94614
Czytam blok INDEX, 81519 kawałków na 40765 klatek (fpos=182011420).
AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x1F8C)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video size=155238898 (40765) audio size=26089728 (67942)
VIDEO:  [XVID]  512x368  12bpp  25.000 fps  761.6 kbps (93.0 kbyte/s)
[V] filefmt:3  fourcc:0x44495658  size:512x368  fps:25.00  ftime:=0.0400
Informacje o klipie:
 Software: FairUse Wizard - http://fairusewizard.com
get_path('sub/') -> '/home/nocturn/.mplayer/sub/'
[x11] NET style stay on top (layer 0). Using state _NET_WM_STATE_ABOVE.
[VO_XV] It seems there is no Xvideo support for your video card available.
[VO_XV] Run 'xvinfo' to verify its Xv support and read
[VO_XV] DOCS/HTML/en/video.html#xv!
[VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
[VO_XV] Try -vo x11.
[x11] NET style stay on top (layer 0). Using state _NET_WM_STATE_ABOVE.
Błąd przy otwieraniu/inicjalizacji wybranego urządzenia video (-vo).
==========================================================================
Otwieram dekoder audio: [mp3lib] MPEG layer-2, layer-3
dec_audio: Alokuję 4608 + 65536 = 70144 bajtów na bufor wyjściowy.
mp3lib: using SSE optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 48000 Hz 128 kbit Joint-Stereo, BPF: 384
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Wybrany kodek audio: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Tworzę łańcuch filtrów audio dla 48000Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter dummy 
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
ao2: 48000 Hz  2 chans  s16le
audio_setup: using '/dev/dsp' dsp device
audio_setup: using '/dev/mixer' mixer device
audio_setup: using 'pcm' mixer device
audio_setup: sample format: s16le (requested: s16le)
audio_setup: using 2 channels (requested: 2)
audio_setup: using 48000 Hz samplerate (requested: 48000)
audio_setup: frags:  16/16  (4096 bytes/frag)  free:  65536
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Tworzę łańcuch filtrów audio dla 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
Wideo: brak obrazu
Freeing 0 unused video chunks.
Odtwarzam...
XXX initial  v_pts=0.000  a_pos=8064 (0.504)                                    
A:   9.2 (09.2) of 11375.1 ( 3:09:35.0)  1.3%                                   
  =====  PAUZA  =====

Ostatnio edytowany przez nocturn (2009-06-26 14:51:56)

ilin · 2009-06-26 15:16:51

Co tu dużo kombinowac.
Dla testu

Kod:

mplayer film.avi -vo x11

Kod:

mplayer film.avi -vo xv

Na ktorym pójdzie taki ustaw w gmplayerze.

nocturn · 2009-06-26 16:40:08

Ok zadzialal na x11 :) Jednak nastepny problem ejst, nie mam full screena. Wyglada to tak,ze po wlaczeniu full screena dalej mam maly kwadracik z filmem a reszta jest czarne. Dodalem do pliku konfiguracyjnego zoom=1 , ale to nic nie pomogllo. Sprawdzalem na innych kodekach, ale tylko na X11 mam obraz.Co mozna jeszcez zrobic?

ilin · 2009-06-26 16:42:01

Dopisz sobie do pliku
[b]~/.mplayer/config[/b]

Kod:

zoom=1

nocturn · 2009-06-26 16:51:57

[quote=nocturn]Dodalem do pliku konfiguracyjnego zoom=1 , ale to nic nie pomogllo.?[/quote]
Mam dopisany juz:) Fullscreen nie dziala tylko z avi, natomaist na dvd chodzi dobrze

EDIT
Jednak dziala

ilin · 2009-06-26 16:56:26

Musi dzialać.

Zobacz jak ja mam w configu

Kod:

adam@debian:~$ cat ~/.mplayer/config

# Write your default config options here!
##really-quiet=1
vo=x11
slang=1
alang=pl
softvol=1
ao=oss
zoom=1
subcp=cp1250
aspect=4:3
subfont-text-scale=3.5
unicode=1
autosync=30
osdlevel=3
monitoraspect=4:3
stop-xscreensaver=1
nojoystick=1
nolirc=1
channels=6
cache=1000
#afm=realaud
#vf=expand=0:-120:0
#vf=pp,expand=0:-70:0:0
subfont-osd-scale=3
##ass=1
##embeddedfonts=1
##ass-color=55ff0000
##ass-font-scale=1.5
stop-xscreensaver=1
tv=device=/dev/video0:driver=v4l2:outfmt=yuy2:normid=5:fps=25:width=768:height=578:brightness=20:contrast=0:saturation=100:channels=51-TVP1,25-TVP2,48-TV4,59-Polsat,42-Wroclaw,31-Poznan,36-CT1,50-CT2,53-NOVA:adevice=/dev/dsp:amode=1

Oczywiście wybierz potrzebne opcje.

nocturn · 2009-06-26 16:59:53

Dzieki wielkie za pomoc. Jeszcze jedno pytanie mam. Gmplayer wspiera wyswietlanie menu w filmach dvd?? W kazdym filmie pomija mi reklamy poczatkowe, ostrzezenia o kopiowaniu itp i od razu wlacza film.

ilin · 2009-06-26 17:04:31

Tak.
Mplayer tak ma.
Chyba ze wejdziesz na sciezkę z tymi bzdurami.

Ostatnio wprowadza się obslugę dvdnav do mplayera ale jak ostatnio sprawdzalem to nie bardzo sobie to jeszcze radziło.

Warto zainstalować sobie programik [b]lsdvd[/b] za jego pomoca można zobaczyć jakie ściezki posiada dana płyta.

nocturn · 2009-06-26 17:57:18

Troszke szkoda, ze nie zostalo to zaimplementowane. Bede musial uzywac VLC do DVD :)
Jezeli chodzi o sprawdzenie tego dvdnav to pewnie musze przekompilwac mplayera i dociagnac jakies biblioteki ?:)

ilin · 2009-06-26 18:07:39

Sprawdź

Kod:

mplayer dvdnav://

nocturn · 2009-06-26 18:13:51

Takie cos wyrzucil

Kod:

Odtwarzam dvdnav://.
No stream found to handle url dvdnav://

ilin · 2009-06-26 18:22:11

Sprawdź na innej płycie.

U mnie działa.
Ale muszę odpalać tak

Kod:

mplayer dvdnav:// -nocache

bo cache mam w configu podbite dla sieciowych strumieni bo mam wolne lącze.

nocturn · 2009-06-26 18:47:50

Dobra narazie nei bede sie tym bawil, bo juz mam dosc:) Jeszce jedno mam pytanie teraz odnosnie VLC(zeby nie robic dwoch tematow). Chodzi o to, ze VLC nie trzyma ustawien.
Odpalam VLC wchodze w ustawienia->preferencje potem w interfejs, wybieram tam glowne interfejsy, nastepnie zaznaczam interfejs uzywajacy skory. Daje zapisz, potem zmieniam skorke wychodze z vlc, wlaczam na nowo i juz wszystko wrocilo do ustawien domyslnych. Skora wrocila podstawowa, w ustawienia->preferencje juz nie jest zaznaczone interfejs uzywajacy skory. Plik konfiguracyjny jest w /home/nocturn/.vlc i mam do niego prawa zapisu wiec nie wiem czemu nie trzyma ustawien :(

ilin · 2009-06-26 19:48:40

Co do vlc to nie wiem nie używam.
Jeśli mogę zasugerować to wypróbuj repowego mplayera z debian-multimedia.
Powinien mieć wkompilowane dvdnav.

nocturn · 2009-06-29 19:46:15

Jeszcze mam jeden problem z mplayerem. Chodzi o odtwarzanie filmow rmvb. Jak chce wlaczyc film rmvb wyrzuca blad "nie moge otworzyc wymaganego kodeka DirectShow drvc.dll". Dziwne ejst to , ze ten kodek jest w katalogu codecs, ponadto mimo tego bledu filmy odtwarzaja sie dobrze. Jedynie ten blad jest troche denerwujacy podczas wlaczania filmow rmvb.

ilin · 2009-06-29 20:57:15

Dopisz sobie do [b]~/.mplayer/config[/b]

Kod:

vfm=ffmpeg

nocturn · 2009-06-30 21:48:48

Niestety nie pomoglo

ilin · 2009-06-30 22:20:52

Czy kosolowy mplayer też Ci w terminalu ten komunikat wypisuje?

Jesli nie to wywal ~/.mplayer/gui.conf

Kudzu · 2009-07-01 00:45:22

Mój config:

# Write your default config options here!

vo=xv
ao=alsa
fs=no
zoom=1

fontconfig=yes
subcp = "cp1250"
font = "/usr/share/fonts/truetype/msttcorefonts/ariali.ttf"
subfont-encoding = "unicode"
subfont-text-scale = 4
vf=pp,expand=0:-100:0[/quote]
oraz gui.conf
enable_audio_equ = "no"
vo_driver = "xv"
vo_panscan = "0.000000"
vo_doublebuffering = "yes"
vo_direct_render = "no"
vo_dxr3_device = "/dev/em8300-0"
v_framedrop = "1"
v_flip = "0"
v_ni = "no"
v_idx = "-1"
v_vfm = "ffmpeg"
a_afm = "liba52"
vf_pp = "no"
vf_autoq = "0"
vf_lavc = "no"
ao_driver = "alsa"
ao_volnorm = "no"
softvol = "no"
ao_surround = "no"
ao_extra_stereo = "no"
ao_extra_stereo_coefficient = "1.000000"
dvd_device = "/dev/dvd"
cdrom_device = "/dev/cdrom"
osd_level = "3"
sub_auto_load = "yes"
sub_unicode = "no"
ass_enabled = "no"
ass_use_margins = "no"
ass_top_margin = "0"
ass_bottom_margin = "0"
sub_pos = "99"
sub_overlap = "no"
sub_cp = "CP1250"
font_factor = "0.750000"
font_name = "/usr/share/fonts/truetype/msttcorefonts/ariali.ttf"
font_encoding = "unicode"
font_text_scale = "6.270000"
font_osd_scale = "6.000000"
font_blur = "2.000000"
font_outline = "2.000000"
font_autoscale = "1"
cache = "no"
cache_size = "1024"
playbar = "yes"
load_fullscreen = "no"
show_videowin = "yes"
stopxscreensaver = "yes"
autosync = "no"
autosync_size = "0"
gui_skin = "default"
gui_save_pos = "yes"
gui_main_pos_x = "664"
gui_main_pos_y = "621"
gui_video_out_pos_x = "308"
gui_video_out_pos_y = "145"
equ_band_00 = "0.000000"
equ_band_01 = "0.000000"
equ_band_02 = "0.000000"
equ_band_03 = "0.000000"
equ_band_04 = "0.000000"
equ_band_05 = "0.000000"
equ_band_06 = "0.000000"
equ_band_07 = "0.000000"
equ_band_08 = "0.000000"
equ_band_09 = "0.000000"
equ_band_10 = "0.000000"
equ_band_11 = "0.000000"
equ_band_12 = "0.000000"
equ_band_13 = "0.000000"
equ_band_14 = "0.000000"
equ_band_15 = "0.000000"
equ_band_16 = "0.000000"
equ_band_17 = "0.000000"
equ_band_18 = "0.000000"
equ_band_19 = "0.000000"
equ_band_20 = "0.000000"
equ_band_21 = "0.000000"
equ_band_22 = "0.000000"
equ_band_23 = "0.000000"
equ_band_24 = "0.000000"
equ_band_25 = "0.000000"
equ_band_26 = "0.000000"
equ_band_27 = "0.000000"
equ_band_28 = "0.000000"
equ_band_29 = "0.000000"
equ_band_30 = "0.000000"
equ_band_31 = "0.000000"
equ_band_32 = "0.000000"
equ_band_33 = "0.000000"
equ_band_34 = "0.000000"
equ_band_35 = "0.000000"
equ_band_36 = "0.000000"
equ_band_37 = "0.000000"
equ_band_38 = "0.000000"
equ_band_39 = "0.000000"
equ_band_40 = "0.000000"
equ_band_41 = "0.000000"
equ_band_42 = "0.000000"
equ_band_43 = "0.000000"
equ_band_44 = "0.000000"
equ_band_45 = "0.000000"
equ_band_46 = "0.000000"
equ_band_47 = "0.000000"
equ_band_48 = "0.000000"
equ_band_49 = "0.000000"
equ_band_50 = "0.000000"
equ_band_51 = "0.000000"
equ_band_52 = "0.000000"
equ_band_53 = "0.000000"
equ_band_54 = "0.000000"
equ_band_55 = "0.000000"
equ_band_56 = "0.000000"
equ_band_57 = "0.000000"
equ_band_58 = "0.000000"
equ_band_59 = "0.000000"[/quote]
Spróbuj na tych ustawieniach.

...software is like sex
it's better when it's free..

Offline

Time (s)	Query
0.00014	SET CHARSET latin2
0.00005	SET NAMES latin2
0.00113	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.141.2.191' WHERE u.id=1
0.00065	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.141.2.191', 1732864324)
0.00042	SELECT * FROM punbb_online WHERE logged<1732864024
0.00061	DELETE FROM punbb_online WHERE ident='3.139.108.99'
0.00057	DELETE FROM punbb_online WHERE ident='66.249.65.104'
0.00089	SELECT topic_id FROM punbb_posts WHERE id=122341
0.00010	SELECT id FROM punbb_posts WHERE topic_id=14485 ORDER BY posted
0.00086	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=14485 AND t.moved_to IS NULL
0.00014	SELECT search_for, replace_with FROM punbb_censoring
0.00298	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=14485 ORDER BY p.id LIMIT 0,25
0.00070	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=14485
Total query time: 0.00924 s

Forum Debian Users Gang

Ogłoszenie

#1 2009-06-26 14:07:23

nocturn - Użytkownik

mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

Kod:

Kod:

Kod:

#2 2009-06-26 14:16:14

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#3 2009-06-26 14:47:41

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

#4 2009-06-26 15:16:51

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

Kod:

#5 2009-06-26 16:40:08

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#6 2009-06-26 16:42:01

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

#7 2009-06-26 16:51:57

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#8 2009-06-26 16:56:26

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

#9 2009-06-26 16:59:53

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#10 2009-06-26 17:04:31

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#11 2009-06-26 17:57:18

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#12 2009-06-26 18:07:39

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

#13 2009-06-26 18:13:51

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

#14 2009-06-26 18:22:11

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

#15 2009-06-26 18:47:50

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#16 2009-06-26 19:48:40

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#17 2009-06-29 19:46:15

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#18 2009-06-29 20:57:15

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Kod:

#19 2009-06-30 21:48:48

nocturn - Użytkownik

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#20 2009-06-30 22:20:52

ilin - Palacz

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

#21 2009-07-01 00:45:22

Kudzu - 1NF:rM@7iON1SP0vvErr

Re: mplayer odtwarza filmy , a gmplayer juz nie :(

Stopka forum

Informacje debugowania