Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2005-09-14 01:11:14
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
zestaw bezprzewodowy creativa
Witam jestem dopiero co nowym a praktycznie to jeszcze nie jestem uzytkownikiem Debiana
Mam pytani a mianowicie
Mam zestaw bezprzewodowy creative Wirelles 6000 podłączony pod USB podczas instalacji debiana sarge 3.1 prawie prz koncu trzeba wybrac mysz albo autodetect niestety jezeli wybiore auto to mi jej nie wykrywa jezeli wzme bez automatycznego wykrywania pojawiają sie opcje mianowicie(prawdopodobnie) gdzie mysz urzeduje ale niewiem co wybrac jest kilka opcji
jezeli nie podłącze podczas instalacji myszy pod ps2 to to wtedyn niemoge wogule z niej kozystac poniewaz nie wkrywa mi na usb i niechcą mi sie uruchomić X-ksy Moze macie jakis sposob moze zainstalowac najpierw mysz z na ps/2 a potem cos mi doradzicie z wpisem do /etc/X11/XF86config-4
Dodam ze klawiatura działa
Przejrzałem forum był poruszany juz taki problem ale nie było odpowiedzi
z gory dziekuje
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#2 2005-09-14 08:25:19
Bodzio - 
Ojciec Założyciel
Re: zestaw bezprzewodowy creativa
Na kilku sprzętach na których stawiałem Debka, myszy na USB chodziły na /dev/input mice
myszy podłączone pod PS2 chodzą na /dev/psaux/imps2 (z rolką) lub ps2 (bez rolki)
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
#3 2005-09-14 16:01:25
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
Re: zestaw bezprzewodowy creativa
No niestety na /dev/input mice tez nie działa ten sam komunikat ze x serwer jest zle skonfigurowany niewiem co jest garane
Czy z takimi zestawami bezprzewodowymi sa problemy czy tylko ja takie mam jezeli nie to moze juz ktos rozwiazał ten problem i podzieli sie wiedzą i doswiadczeniem ??
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#4 2005-09-14 16:40:50
Bodzio - Ojciec Założyciel
Re: zestaw bezprzewodowy creativa
To załącz końcówkę loga, tam pisze gdzie są błędy (EE)
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
#5 2005-09-14 18:36:30
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
Re: zestaw bezprzewodowy creativa
niewiem dokładnie jak mam to zrobic czy mogł bys mi dac jakies wskazówki
a to dlatego poniewaz gdy dochodze podczas instalacji jakie pakiety mają byc zainstalowane wybieram srodowisko graficzne ni i leci z pakietemi nastepnie wybieram czy ma mi wykryc automatycznie mysz biore nie bo nie wykrywa mi jej automatycznie jezeli wezme nie to znajduje sie w oknie gdzie mam wybrac chyba jak juz pisałem gdzie znajduje sie mysz no i oczywiscie niewiem co wybrac jezeli podacze mysz pod ps/2 i wybiore jak trzeba to dalej znowu jakies pakiety sie instalują jezeli jednak zostane przy mojim zestawie creatiwy to lecą pakiety pod koniec probują sie uruchomic x-ksy ale bez powodzenia i wyskakuje komunikate ze serwer X został zle skonfigurowany czy chce zobaczyc jak wiec naciskam ok potem nic wsumie tam niema naciskam znowu enter i wyskakuje mi czarny ekran z migającym kursorem gdzie nic iie moge zrobić
wiec moze zainstalowac najpierw myszke ps/2 a potem moze mi ktos podesle albo powie co mam zrobic w pliku XF86Config-4
wykrywa mi klawiature ale jak by była ona sama bez myszki
ktos mi doradziła zeby wpisać coś takiego
Option" "Protocol" "IMPS/2
"Option" "ZAxisMapping" "4 5"
to scroll
ale zbytnio niewiem jak dokładnie to zrobic skasowac to co jest do myszy w pliku XF86Config-4 czy cos innego jezeli ktos by mogł mi podesłać plik z juz wykonanym działaniem bede wdzieczny
Dzieki Bodzio za zainteresowanie sie tematem
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#6 2005-09-14 19:24:05
Bodzio - Ojciec Założyciel
Re: zestaw bezprzewodowy creativa
Logi są w:
/var/log/XFree86.0.log
Polecenie do ponownej konfiguracji serwera X-ów to:
dpkg-reconfigure xserver-xfree86
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
#7 2005-09-14 21:01:32
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
Re: zestaw bezprzewodowy creativa
a wiec ta
zainstalowalem debiana z myszka ps/2 wszystko ladnie chodzi ale oczywiscie nie chcialbym miec myszke tom z zestawu
co zas do log-ow to przesylam niewiem czy sa potrzebne teraz ale nieznam sie sa jest to juz z dzialajacymi x-ksami ale z myszka ps/2 jest tego sporo
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14 20050601051219 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.29-pre2 i686 [ELF]
Build Date: 01 June 2005
This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.
We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.
Before filing a bug report, you may want to consult the Debian X FAQ:
XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz
Module Loader present
OS Kernel: Linux version 2.4.27-2-k7 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 17:18:17 JST 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 14 20:38:43 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Sampo Tech. STC"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "macintosh"
(**) XKB: model: "macintosh"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80020014, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1458,0c11 rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1458,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1458,5004 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1458,5004 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1458,5004 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,006a card 1458,a002 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1458,5002 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:08:0: chip 109e,036e card 0000,0000 rev 02 class 04,00,00 hdr 80
(II) PCI: 01:08:1: chip 109e,0878 card 0000,0000 rev 02 class 04,80,00 hdr 80
(II) PCI: 01:0a:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:00:0: chip 1002,4150 card 174b,0290 rev 00 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,4170 card 174b,0291 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x00009fff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe7000000 - 0xe7ffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe5000000 - 0xe6ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(--) PCI: (1:8:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xe4000000/12
(--) PCI:*(2:0:0) ATI Technologies Inc unknown chipset (0x4150) rev 0, Mem @ 0xd0000000/27, 0xe6000000/16, I/O @ 0xa000/8
(--) PCI: (2:0:1) ATI Technologies Inc unknown chipset (0x4170) rev 0, Mem @ 0xd8000000/27, 0xe6010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe7000000 - 0xe70000ff (0x100) MX[B]
[1] -1 0 0xe4001000 - 0xe4001fff (0x1000) MX[B]
[2] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[3] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B]
[4] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[5] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe6010000 - 0xe601ffff (0x10000) MX[B](B)
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xe6000000 - 0xe600ffff (0x10000) MX[B](B)
[10] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xe4000000 - 0xe4000fff (0x1000) MX[B](B)
[12] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[14] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[15] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe7000000 - 0xe70000ff (0x100) MX[B]
[1] -1 0 0xe4001000 - 0xe4001fff (0x1000) MX[B]
[2] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[3] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B]
[4] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[5] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe6010000 - 0xe601ffff (0x10000) MX[B](B)
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xe6000000 - 0xe600ffff (0x10000) MX[B](B)
[10] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xe4000000 - 0xe4000fff (0x1000) MX[B](B)
[12] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[14] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[15] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe7000000 - 0xe70000ff (0x100) MX[B]
[6] -1 0 0xe4001000 - 0xe4001fff (0x1000) MX[B]
[7] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[8] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B]
[9] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe6010000 - 0xe601ffff (0x10000) MX[B](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[14] -1 0 0xe6000000 - 0xe600ffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xe4000000 - 0xe4000fff (0x1000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[22] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[23] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 6.5.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.5) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 02:00:0
(II) ATI: Candidate "Device" section "Generic Video Card".
(WW) ATI: PCI/AGP Mach64 in slot 2:0:1 could not be detected!
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset ATI Radeon 9600 AP (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe7000000 - 0xe70000ff (0x100) MX[B]
[6] -1 0 0xe4001000 - 0xe4001fff (0x1000) MX[B]
[7] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[8] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B]
[9] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe6010000 - 0xe601ffff (0x10000) MX[B](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[14] -1 0 0xe6000000 - 0xe600ffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xe4000000 - 0xe4000fff (0x1000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[22] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[23] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe7000000 - 0xe70000ff (0x100) MX[B]
[6] -1 0 0xe4001000 - 0xe4001fff (0x1000) MX[B]
[7] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[8] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B]
[9] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe6010000 - 0xe601ffff (0x10000) MX[B](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[14] -1 0 0xe6000000 - 0xe600ffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xe4000000 - 0xe4000fff (0x1000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[24] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[25] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[26] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xe6000000
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 2 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): AGP card detected
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 1
(II) RADEON(0): Displays Detected: Monitor1--Type 1, Monitor2--Type 0
(II) RADEON(0): Monitor1 EDID data ---------------------------
(II) RADEON(0): Manufacturer: STC Model: 209 Serial#: 16843009
(II) RADEON(0): Year: 1999 Week: 0
(II) RADEON(0): EDID Version: 1.1
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
(II) RADEON(0): Gamma: 1.00
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): redX: 0.619 redY: 0.350 greenX: 0.305 greenY: 0.600
(II) RADEON(0): blueX: 0.154 blueY: 0.064 whiteX: 0.280 whiteY: 0.311
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Monitor name: Sampo Tech.
(II) RADEON(0): Monitor name: KM-521
(II) RADEON(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: 000001
(II) RADEON(0): End of Monitor1 EDID data --------------------
(II) RADEON(0):
(II) RADEON(0): Primary Display == Type 1
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Sampo Tech. STC: Using hsync range of 30.00-70.00 kHz
(II) RADEON(0): Sampo Tech. STC: Using vrefresh range of 50.00-120.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Sampo Tech. STC) mode clock 122MHz exceeds DDC maximum 110MHz
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x960" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x864" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1024x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1024x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1024x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1024x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1024x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "832x624" (width too large for virtual size)
(--) RADEON(0): Virtual size is 800x600 (pitch 832)
(**) RADEON(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RADEON(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) RADEON(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) RADEON(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) RADEON(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) RADEON(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) RADEON(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) RADEON(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) RADEON(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) RADEON(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) RADEON(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) RADEON(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) RADEON(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) RADEON(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) RADEON(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(--) RADEON(0): Display dimensions: (280, 210) mm
(--) RADEON(0): DPI set to (72, 72)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe6000000 - 0xe600ffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe7000000 - 0xe70000ff (0x100) MX[B]
[8] -1 0 0xe4001000 - 0xe4001fff (0x1000) MX[B]
[9] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[10] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B]
[11] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[12] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[14] -1 0 0xe6010000 - 0xe601ffff (0x10000) MX[B](B)
[15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[16] -1 0 0xe6000000 - 0xe600ffff (0x10000) MX[B](B)
[17] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[18] -1 0 0xe4000000 - 0xe4000fff (0x1000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[22] 0 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[26] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[27] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[28] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[29] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[30] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
(II) RADEON(0): Wrote: rd=12, fd=100, pd=2
(WW) RADEON(0): Direct rendering not yet supported on Radeon 9500/9700 and newer cards
(II) RADEON(0): Memory manager initialized to (0,0) (832,8191)
(II) RADEON(0): Reserved area from (0,600) to (832,602)
(II) RADEON(0): Largest offscreen area available: 832 x 7589
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
28 256x256 slots
13 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 602)
(II) RADEON(0): Largest offscreen area available: 832 x 7584
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
No such device.
(EE) Generic Mouse: cannot open input device
(EE) PreInit failed for input device "Generic Mouse"
(II) UnloadModule: "mouse"
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Server_Terminate keybinding not found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
SetClientVersion: 0 9
a tu jeszcze przesylam plik /etc/X11/XF86Config-4
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "macintosh"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "ati"
EndSection
Section "Monitor"
Identifier "Sampo Tech. STC"
HorizSync 30-70
VertRefresh 50-120
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Sampo Tech. STC"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection[b][/b][color=red][/color][color=darkred][/color]
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#8 2005-09-16 07:30:08
Usnar - Członek DUG
- Usnar
- Członek DUG
- Zarejestrowany: 2005-02-14
Re: zestaw bezprzewodowy creativa
musisz jeszcze wkompilowac kilka rzeczy w jadro.
W USB support trzeba zaznaczyc: USB Human Interface Device (HID)
w Input Core support zaznaczyc: Mouse Support
Jak juz skompilujesz jako to sproboj pozniej wpisac cat /dev/psaux i ruszac ta bezprzewodowa mysza. U mnie wyskakiwaly rozne znaczki i u ciebie powinno byc to samo, jak nie bedzie na psaux to bedzie na innym /dev/input/mice czy cos takiego. Powodzenia.
Offline
#9 2005-09-17 19:55:06
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
Re: zestaw bezprzewodowy creativa
czy mogł bym Cie jeszcze prosic o rade jak wkompilowac te opcje w juz istniejace jadro bez koniecznosci kompilowania i instalacji nowego
czy i jaka komende moge zastosowac do edycji opcji juz istniejacego kernela Dodam ze posiadam kernela 2.4
z gory jeszcze raz dziekuje
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#10 2005-09-17 20:11:46
Bodzio - Ojciec Założyciel
Re: zestaw bezprzewodowy creativa
Wystarczy że w konfiguratorze zaznaczysz odpowiednie moduły
potem wykonujesz dwa polecenia:
make modukes
make modules install
potrwa to szybko bo przekopiluje tylkote moduły
i przy pomocy modconf załaduj moduły na stałe
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
#11 2005-09-18 21:30:36
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
Re: zestaw bezprzewodowy creativa
ok tylko mam jeszcze jedno chyba pytanie a mianowicie Napisałeś
Wystarczy że w konfiguratorze zaznaczysz odpowiednie moduły
w konfiguratorze czy mogł bys mi jeszcze poradzic dikładnie jak go znalesc bo nie jestem pewien jak pisze jestem poczatkujacy
jak odpalic ten konfigurator
moze jest to nieco smieszne pytanie ?!
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#12 2005-09-18 22:27:07
Bodzio - Ojciec Założyciel
Re: zestaw bezprzewodowy creativa
Dwie rzeczy - po pierwsze myślałem że już kompilowałeś jądro. Z Twojej wypowiedzi wynika że nie.
Konfigurator uruchamiasz wchodząc do katalogu ze źródłami jądra
/usr/src/linux_wersja
tam wklepujesz polecenie make menuconfig
uruchamia się konfigurator jądra w którym możesz właśnie robić to co zamierzasz.
W Twoim przypadku wystarczy jako root w konsoli wydać polecenie
modonf i tam dodać odpowiednie moduły
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
#13 2005-09-19 14:02:57
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
Re: zestaw bezprzewodowy creativa
konfigurowałem juz kernela ale chodziło mi własnie o polecenie modonf tego nie wiedziałem dzieki rezultaty opisze
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#14 2005-09-20 16:49:40
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
Re: zestaw bezprzewodowy creativa
wiec mam taki problem
napisałeś ze wystarczy mi wpisac polecenie modonf tak z ciekawosci sie zapytam czy Ci sie nie pomyliło i nie powinno być modconf ale to tak na marginesie oby dwa polecenia nie działają pisze4 ze niema takiej komendy wiec postanowiłem sprawdzic czy wogole moge skonfigurowac kernela ale po wpisaniu make menuconfig wyskoczyło cos takiego
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
make -C scripts/lxdialog all
make[1]: Entering directory `/usr/src/kernel-source-2.4.27/scripts/lxdialog'
/usr/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
>> Unable to find the Ncurses libraries.
>>
>> You must have Ncurses installed in order
>> to use 'make menuconfig'
make[1]: *** [ncurses] Błąd 1
make[1]: Leaving directory `/usr/src/kernel-source-2.4.27/scripts/lxdialog'
make: *** [menuconfig] Błąd 2
sprobowałem wiec make xconfig oto rezultaty
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
make -C scripts kconfig.tk
make[1]: Entering directory `/usr/src/kernel-source-2.4.27/scripts'
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -c -o tkparse.o tkparse.cgcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -c -o tkcond.o tkcond.c
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -c -o tkgen.o tkgen.c
gcc -o tkparse tkparse.o tkcond.o tkgen.o
cat header.tk >> ./kconfig.tk
./tkparse < ../arch/i386/config.in >> kconfig.tk
echo "set defaults "arch/i386/defconfig"" >> kconfig.tk
echo "set ARCH "i386"" >> kconfig.tk
cat tail.tk >> kconfig.tk
chmod 755 kconfig.tk
make[1]: Leaving directory `/usr/src/kernel-source-2.4.27/scripts'
wish -f scripts/kconfig.tk
make: wish: Polecenie nie znalezione
make: *** [xconfig] Błąd 127
co jest nie tak??
polecenia wpisuje w katalogu ze zrodłami kernela i z pod rota
polecenie uname -a pokazuje
Linux Author 2.4.27-2-k7 #1 Mon May 16 17:18:17 JST 2005 i686 GNU/Linux
wiec chyba dobre zrodła zainstalowałem kernel-source-2.4.27
mam jeszcze jedno pytanie
znalazłem podobny watek zeby nie powiedziec identyczny jakim sie teraz zajmujemy :) autor tego watku napisał mniej wiecej tak na koniec
juz sobie poradziłem z tym problemem
chodz nie było nic opisane jak to zrobic
czy nie nalezało by tu ustalic takich zasad jezeli ktos poadzi sobie z jakims problemem to napisac w jaki sposob zeby nie wracac do tego watku na nowo przeciez chodzi oto aby podzielic sie z rozwiązanym problemem dla przyszłych uzytkowników Debiana
jest to moja indywidualna opinia .
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#15 2005-09-20 23:09:50
Kuki - Użytkownik
- Kuki
- Użytkownik
- Zarejestrowany: 2005-09-14
Re: zestaw bezprzewodowy creativa
qrozwiazanie czesciowo problemu
postanowiłem posłuchac dzwieku ale niestety i tu znalazłem problemu w postaci jego braku postanowiłem wiec poszukac odpowiedzi na forum "szukaj"
znalazłem tam taka odpowiedz
W Sarge to jądro jest dość mocno okrojone - może nie wykryć siciówki i dźwięku.
Jeżeli w czasie instalowania na starcie wpiszesz linux26 to uruchomisz instalatora z jądrem 2.6 i teoretycznie powinien ci wykryć jedno i drugie.
Oczywiście zawsze możesz przekompilować jądro 2.4 i włączyć obsługę tych urządzeń[/quote]
ktora mnie zainspirowała co do mojej myszki zainstalowałem wiec debiana z jadrem 2.6.8 i problem czesciowo znikł poniewz myszka działa ale niestety skacze (co do dzwieku nadal lipa) wiec trzeba zainstalowac kernela 2.6.10 mam nadzieje ze da sie poprzez APT
skaczaca myszka moim zdaniem to takze wina kernela niema tego problemu w jadrze 2.6.10 i 2.6.12 natomiast w 2.6.11 wystepuje
dzieki Bodzio za zainteresowanie i pomoc !!!
STALISMY NAD PRZEPASCIĄ ALE ZROBILISMY DUZY KROK NA PRZOD :)
Offline
#16 2005-09-21 07:51:24
Bodzio - Ojciec Założyciel
Re: zestaw bezprzewodowy creativa
Nie zainstalujesz kernela 2.6.10 przez apta - na oficjalnych serwerach debiana, najwyższa wersja to 2.6.8
Pozostaje ci ręczna kompilacja, która nie jest trudna, a wręcz przyjemna.
Poszukaj w dziale kernela są linki do strony opisującej konfigurację i kompilację jajka po polsku.
Poświęć na to nawet cały dzień a nie pożałujesz. Poza tym pracując z linuxem prędzej czy później będziesz musiał to zrobić ;)
pozdro
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00010 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00098 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.191.237.228' WHERE u.id=1 |
| 0.00066 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.191.237.228', 1733001334) |
| 0.00049 | SELECT * FROM punbb_online WHERE logged<1733001034 |
| 0.00078 | SELECT topic_id FROM punbb_posts WHERE id=13158 |
| 0.00233 | SELECT id FROM punbb_posts WHERE topic_id=1549 ORDER BY posted |
| 0.00082 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=1549 AND t.moved_to IS NULL |
| 0.00009 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00215 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=1549 ORDER BY p.id LIMIT 0,25 |
| 0.00096 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=1549 |
| Total query time: 0.0094 s | |