Forum Debian Users Gang

Shiny · 2013-01-05 17:45:16

Z tego co próbuję w internecie "wygenerować" własny "modeline", zazwyczaj zmienia się rozdzielczość albo na 1360, albo na 1368, a jedyny poprawny, który na dodatek jest przystosowany do tego monitora i który próbuję dodać do xorg.conf:

Kod:

ModeLine "1366x768" 85.5 1366 1436 1579 1792 768 771 774 798 +hsync +vsync

powoduje, że Linux się nie uruchamia. Wyłączenie EDID również nic nie daje. Co najśmieszniejsze, bez sterowników od nVidii wszystko jest okej.
Tak więc myślę, że może Wheezy będzie dużo lepszym kandydatem, niż Squeeze, choć bardziej wydaje mi się, że to wina sterowników.

Ostatnio edytowany przez Shiny (2013-01-05 17:45:55)

ArnVaker · 2013-01-05 17:56:13

Na to wygląda. Najnowsze zamknięte sterowniki oficjalnie obsługujące tę kartę to aktualnie 304.64, można jeszcze obadać, a nuż coś poprawili.

Shiny · 2013-01-05 22:39:12

No cóż, ściągnąłem ostatnią możliwą wersję Debiana, tym razem Wheezy. Zainstalowałem, zdziwiłem się od razu, bo nowy interfejs jest bardzo ładny, a przede wszystkim szybki. Tylko że... no chciałbym jednak zainstalować sterowniki nVidii ale tak, żeby nie uwalić przy tym całego systemu, czy muszę na "Wheezy'm" zrobić to inaczej niż na "Squeeze", czy tak samo jak [url=http://dug.net.pl/tekst/125/nvidia___konfiguracja_rozdzielczosci_i_odswiezania_obrazu/]tutaj[/url]?

Ostatnio edytowany przez Shiny (2013-01-05 22:39:57)

ArnVaker · 2013-01-05 22:50:56

[quote=Shiny]Zainstalowałem, zdziwiłem się od razu, bo nowy interfejs jest bardzo ładny, a przede wszystkim szybki.[/quote]
Tak z ciekawości: masz na myśli GNOME, KDE, czy jeszcze coś innego?

[quote=Shiny]Tylko że... no chciałbym jednak zainstalować sterowniki nVidii ale tak, żeby nie uwalić przy tym całego systemu, czy muszę na "Wheezy'm" zrobić to inaczej niż na "Squeeze", czy tak samo jak [url=http://dug.net.pl/tekst/125/nvidia___konfiguracja_rozdzielczosci_i_odswiezania_obrazu/]tutaj[/url]?[/quote]
Ciężko powiedzieć… Zainstaluj normalnie i zobacz co będzie. ;) Ten poradnik to dopiero jeśli znowu będą jakieś problemy.

Shiny · 2013-01-05 23:02:53

Co do interfejsu, to mam na myśli GNOME, do KDE nie potrafię się przyzwyczaić. A co do normalnej instalacji to z chęcią, ale w Synaptic'u widzę tylko "nvidia-alternative-legacy-173xx", nie wiem czy to to, lecz jeśli znów się wysypią sterowniki, lub rozdzielczość zeświruje, najwyżej tutaj odpiszę.

ArnVaker · 2013-01-05 23:47:34

E tam Synaptic, „normalnie” znaczy z wiersza poleceń: http://dug.net.pl/tekst/142/ ;)

Shiny · 2013-01-06 19:46:58

No cóż, zrobiłem więc tak, jak to było napisane w tym poradniku... i po instalacji sterowników 173 znów mam nieprawidłową rozdzielczość. Tylko tym razem Debian włącza się w rozdzielczości 1152x720, a swojej rozdzielczości (1366x768) znów wybrać nie mogę, tylko [b]1360x768[/b]... Xorg.conf:

Kod:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.48  (buildd@murphy)  Wed Sep 12 11:32:28 UTC 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
    Option         "metamodes" "1366x768_60"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Logi:

Kod:

[    27.574] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    27.574] X Protocol Version 11, Revision 0
[    27.574] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    27.574] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    27.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[    27.574] Build Date: 29 November 2012  08:52:43PM
[    27.574] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    27.574] Current version of pixman: 0.26.0
[    27.574]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    27.574] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan  6 19:41:01 2013
[    27.653] (==) Using config file: "/etc/X11/xorg.conf"
[    27.653] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.703] (==) ServerLayout "Layout0"
[    27.703] (**) |-->Screen "Screen0" (0)
[    27.703] (**) |   |-->Monitor "Monitor0"
[    27.716] (**) |   |-->Device "Device0"
[    27.716] (**) |-->Input Device "Keyboard0"
[    27.716] (**) |-->Input Device "Mouse0"
[    27.716] (==) Automatically adding devices
[    27.716] (==) Automatically enabling devices
[    27.775] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    27.775]     Entry deleted from font path.
[    27.821] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    27.821]     Entry deleted from font path.
[    27.821] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    27.822] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.822] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    27.822] (WW) Disabling Keyboard0
[    27.822] (WW) Disabling Mouse0
[    27.822] (II) Loader magic: 0xb77075a0
[    27.822] (II) Module ABI versions:
[    27.822]     X.Org ANSI C Emulation: 0.4
[    27.822]     X.Org Video Driver: 12.1
[    27.822]     X.Org XInput driver : 16.0
[    27.822]     X.Org Server Extension : 6.0
[    27.823] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    27.823] (II) Open ACPI successful (/var/run/acpid.socket)
[    27.823] (II) LoadModule: "extmod"
[    28.002] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.017] (II) Module extmod: vendor="X.Org Foundation"
[    28.017]     compiled for 1.12.4, module version = 1.0.0
[    28.017]     Module class: X.Org Server Extension
[    28.017]     ABI class: X.Org Server Extension, version 6.0
[    28.017] (II) Loading extension SELinux
[    28.018] (II) Loading extension MIT-SCREEN-SAVER
[    28.018] (II) Loading extension XFree86-VidModeExtension
[    28.018] (II) Loading extension XFree86-DGA
[    28.018] (II) Loading extension DPMS
[    28.018] (II) Loading extension XVideo
[    28.018] (II) Loading extension XVideo-MotionCompensation
[    28.018] (II) Loading extension X-Resource
[    28.018] (II) LoadModule: "dbe"
[    28.018] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.034] (II) Module dbe: vendor="X.Org Foundation"
[    28.034]     compiled for 1.12.4, module version = 1.0.0
[    28.034]     Module class: X.Org Server Extension
[    28.034]     ABI class: X.Org Server Extension, version 6.0
[    28.034] (II) Loading extension DOUBLE-BUFFER
[    28.034] (II) LoadModule: "glx"
[    28.034] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    28.631] (II) Module glx: vendor="NVIDIA Corporation"
[    28.631]     compiled for 4.0.2, module version = 1.0.0
[    28.631]     Module class: X.Org Server Extension
[    28.631] (II) NVIDIA GLX Module  173.14.35  Thu May 31 12:34:02 PDT 2012
[    28.631] (II) Loading extension GLX
[    28.631] (II) LoadModule: "record"
[    28.632] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    28.643] (II) Module record: vendor="X.Org Foundation"
[    28.643]     compiled for 1.12.4, module version = 1.13.0
[    28.643]     Module class: X.Org Server Extension
[    28.643]     ABI class: X.Org Server Extension, version 6.0
[    28.643] (II) Loading extension RECORD
[    28.643] (II) LoadModule: "dri"
[    28.644] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    28.656] (II) Module dri: vendor="X.Org Foundation"
[    28.656]     compiled for 1.12.4, module version = 1.0.0
[    28.656]     ABI class: X.Org Server Extension, version 6.0
[    28.656] (II) Loading extension XFree86-DRI
[    28.656] (II) LoadModule: "dri2"
[    28.657] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    28.658] (II) Module dri2: vendor="X.Org Foundation"
[    28.658]     compiled for 1.12.4, module version = 1.2.0
[    28.658]     ABI class: X.Org Server Extension, version 6.0
[    28.658] (II) Loading extension DRI2
[    28.658] (II) LoadModule: "nvidia"
[    28.658] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    28.718] (II) Module nvidia: vendor="NVIDIA Corporation"
[    28.718]     compiled for 4.0.2, module version = 1.0.0
[    28.718]     Module class: X.Org Video Driver
[    28.752] (II) NVIDIA dlloader X Driver  173.14.35  Thu May 31 12:10:59 PDT 2012
[    28.752] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    28.752] (++) using VT number 7

[    28.785] (II) Loading sub module "fb"
[    28.785] (II) LoadModule: "fb"
[    28.786] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.797] (II) Module fb: vendor="X.Org Foundation"
[    28.797]     compiled for 1.12.4, module version = 1.0.0
[    28.797]     ABI class: X.Org ANSI C Emulation, version 0.4
[    28.797] (II) Loading sub module "wfb"
[    28.797] (II) LoadModule: "wfb"
[    28.797] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    28.804] (II) Module wfb: vendor="X.Org Foundation"
[    28.804]     compiled for 1.12.4, module version = 1.0.0
[    28.804]     ABI class: X.Org ANSI C Emulation, version 0.4
[    28.804] (II) Loading sub module "ramdac"
[    28.804] (II) LoadModule: "ramdac"
[    28.804] (II) Module "ramdac" already built-in
[    28.812] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    28.812] (==) NVIDIA(0): RGB weight 888
[    28.812] (==) NVIDIA(0): Default visual is TrueColor
[    28.812] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    28.812] (**) NVIDIA(0): Option "MetaModes" "1366x768_60"
[    28.815] (**) NVIDIA(0): Enabling RENDER acceleration
[    28.815] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    28.815] (II) NVIDIA(0):     enabled.
[    31.170] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[    31.170] (--) NVIDIA(0): Memory: 131072 kBytes
[    31.170] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[    31.170] (II) NVIDIA(0): Detected AGP rate: 8X
[    31.170] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    31.170] (--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0:
[    31.170] (--) NVIDIA(0):     BenQ G925HDA (CRT-0)
[    31.170] (--) NVIDIA(0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[    31.171] (II) NVIDIA(0): Assigned Display Device: CRT-0
[    31.171] (WW) NVIDIA(0): No valid modes for "1366x768_60"; removing.
[    31.171] (WW) NVIDIA(0): 
[    31.171] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[    31.171] (WW) NVIDIA(0):     "nvidia-auto-select".
[    31.171] (WW) NVIDIA(0): 
[    31.171] (II) NVIDIA(0): Validated modes:
[    31.171] (II) NVIDIA(0):     "nvidia-auto-select"
[    31.171] (II) NVIDIA(0): Virtual screen size determined to be 1152 x 720
[    31.172] (--) NVIDIA(0): DPI set to (71, 79); computed from "UseEdidDpi" X config
[    31.172] (--) NVIDIA(0):     option
[    31.172] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    31.172] (--) Depth 24 pixmap format is 32 bpp
[    31.175] (II) NVIDIA(0): Initialized AGP GART.
[    31.179] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    31.322] (II) Loading extension NV-GLX
[    31.355] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[    31.383] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[    31.383] (==) NVIDIA(0): Backing store disabled
[    31.383] (==) NVIDIA(0): Silken mouse enabled
[    31.384] (**) NVIDIA(0): DPMS enabled
[    31.384] (II) Loading extension NV-CONTROL
[    31.385] (==) RandR enabled
[    31.385] (II) Initializing built-in extension Generic Event Extension
[    31.385] (II) Initializing built-in extension SHAPE
[    31.385] (II) Initializing built-in extension MIT-SHM
[    31.385] (II) Initializing built-in extension XInputExtension
[    31.385] (II) Initializing built-in extension XTEST
[    31.385] (II) Initializing built-in extension BIG-REQUESTS
[    31.385] (II) Initializing built-in extension SYNC
[    31.385] (II) Initializing built-in extension XKEYBOARD
[    31.385] (II) Initializing built-in extension XC-MISC
[    31.385] (II) Initializing built-in extension SECURITY
[    31.385] (II) Initializing built-in extension XINERAMA
[    31.385] (II) Initializing built-in extension XFIXES
[    31.385] (II) Initializing built-in extension RENDER
[    31.385] (II) Initializing built-in extension RANDR
[    31.385] (II) Initializing built-in extension COMPOSITE
[    31.385] (II) Initializing built-in extension DAMAGE
[    31.385] (II) SELinux: Disabled on system
[    31.390] (II) Initializing extension GLX
[    31.731] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    31.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.731] (II) LoadModule: "evdev"
[    31.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.745] (II) Module evdev: vendor="X.Org Foundation"
[    31.745]     compiled for 1.12.1, module version = 2.7.0
[    31.745]     Module class: X.Org XInput Driver
[    31.745]     ABI class: X.Org XInput driver, version 16.0
[    31.745] (II) Using input driver 'evdev' for 'Power Button'
[    31.745] (**) Power Button: always reports core events
[    31.745] (**) evdev: Power Button: Device: "/dev/input/event5"
[    31.745] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.745] (--) evdev: Power Button: Found keys
[    31.745] (II) evdev: Power Button: Configuring as keyboard
[    31.745] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    31.745] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.745] (**) Option "xkb_rules" "evdev"
[    31.745] (**) Option "xkb_model" "pc105"
[    31.745] (**) Option "xkb_layout" "pl"
[    31.795] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    31.795] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.795] (II) Using input driver 'evdev' for 'Power Button'
[    31.795] (**) Power Button: always reports core events
[    31.795] (**) evdev: Power Button: Device: "/dev/input/event3"
[    31.795] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.795] (--) evdev: Power Button: Found keys
[    31.795] (II) evdev: Power Button: Configuring as keyboard
[    31.795] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    31.795] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    31.795] (**) Option "xkb_rules" "evdev"
[    31.795] (**) Option "xkb_model" "pc105"
[    31.795] (**) Option "xkb_layout" "pl"
[    31.796] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    31.796] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    31.796] (II) Using input driver 'evdev' for 'Sleep Button'
[    31.796] (**) Sleep Button: always reports core events
[    31.797] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    31.797] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    31.797] (--) evdev: Sleep Button: Found keys
[    31.797] (II) evdev: Sleep Button: Configuring as keyboard
[    31.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    31.797] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    31.797] (**) Option "xkb_rules" "evdev"
[    31.797] (**) Option "xkb_model" "pc105"
[    31.797] (**) Option "xkb_layout" "pl"
[    31.798] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[    31.798] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    31.798] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    31.798] (**) USB USB Keykoard: always reports core events
[    31.798] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[    31.798] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    31.798] (--) evdev: USB USB Keykoard: Found keys
[    31.798] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    31.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    31.798] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[    31.798] (**) Option "xkb_rules" "evdev"
[    31.798] (**) Option "xkb_model" "pc105"
[    31.798] (**) Option "xkb_layout" "pl"
[    31.799] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[    31.799] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    31.799] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    31.799] (**) USB USB Keykoard: always reports core events
[    31.799] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[    31.799] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    31.800] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[    31.800] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[    31.800] (--) evdev: USB USB Keykoard: Found relative axes
[    31.800] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[    31.800] (--) evdev: USB USB Keykoard: Found absolute axes
[    31.800] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[    31.800] (--) evdev: USB USB Keykoard: Found keys
[    31.800] (II) evdev: USB USB Keykoard: Configuring as mouse
[    31.800] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    31.800] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[    31.800] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[    31.800] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.800] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[    31.800] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    31.800] (**) Option "xkb_rules" "evdev"
[    31.800] (**) Option "xkb_model" "pc105"
[    31.800] (**) Option "xkb_layout" "pl"
[    31.800] (II) evdev: USB USB Keykoard: initialized for relative axes.
[    31.800] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[    31.801] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[    31.801] (**) USB USB Keykoard: (accel) acceleration profile 0
[    31.801] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    31.801] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    31.802] (II) config/udev: Adding input device USB Mouse               (/dev/input/event2)
[    31.802] (**) USB Mouse              : Applying InputClass "evdev pointer catchall"
[    31.802] (II) Using input driver 'evdev' for 'USB Mouse              '
[    31.802] (**) USB Mouse              : always reports core events
[    31.802] (**) evdev: USB Mouse              : Device: "/dev/input/event2"
[    31.802] (--) evdev: USB Mouse              : Vendor 0x5e3 Product 0x1205
[    31.802] (--) evdev: USB Mouse              : Found 9 mouse buttons
[    31.802] (--) evdev: USB Mouse              : Found scroll wheel(s)
[    31.802] (--) evdev: USB Mouse              : Found relative axes
[    31.802] (--) evdev: USB Mouse              : Found x and y relative axes
[    31.802] (II) evdev: USB Mouse              : Configuring as mouse
[    31.802] (II) evdev: USB Mouse              : Adding scrollwheel support
[    31.802] (**) evdev: USB Mouse              : YAxisMapping: buttons 4 and 5
[    31.802] (**) evdev: USB Mouse              : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.802] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[    31.802] (II) XINPUT: Adding extended input device "USB Mouse              " (type: MOUSE, id 11)
[    31.802] (II) evdev: USB Mouse              : initialized for relative axes.
[    31.802] (**) USB Mouse              : (accel) keeping acceleration scheme 1
[    31.802] (**) USB Mouse              : (accel) acceleration profile 0
[    31.802] (**) USB Mouse              : (accel) acceleration factor: 2.000
[    31.802] (**) USB Mouse              : (accel) acceleration threshold: 4
[    31.803] (II) config/udev: Adding input device USB Mouse               (/dev/input/mouse0)
[    31.803] (II) No input driver specified, ignoring this device.
[    31.803] (II) This device may have been added with another device file.
[    31.804] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    31.804] (II) No input driver specified, ignoring this device.
[    31.804] (II) This device may have been added with another device file.
[   106.963] (II) NVIDIA(0): Setting mode "CRT-0:1360x768@1360x768+0+0"

ArnVaker · 2013-01-06 20:09:31

173? A dlaczego 173?

Shiny · 2013-01-06 20:29:38

Z własnej głupoty i przyzwyczajenia, ale już "naprawiłem" ten błąd i zainstalowałem najnowszą wersję (usuwając rzecz jasna starą wersję poleceniem "aptitude purge '?installed nvidia'
" oraz usuwając xorga poleceniem "rm /etc/X11/xorg.conf"), która tym razem twierdzi, że nominalna rozdzielczość monitora to [b]1368x768[/b], a logi twierdzą, że:

Kod:

[    27.734] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    27.734] X Protocol Version 11, Revision 0
[    27.734] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    27.734] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    27.734] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[    27.734] Build Date: 29 November 2012  08:52:43PM
[    27.734] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    27.734] Current version of pixman: 0.26.0
[    27.734]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    27.734] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.734] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan  6 20:27:39 2013
[    27.754] (==) Using config file: "/etc/X11/xorg.conf"
[    27.754] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.780] (==) ServerLayout "Layout0"
[    27.780] (**) |-->Screen "Screen0" (0)
[    27.780] (**) |   |-->Monitor "Monitor0"
[    27.792] (**) |   |-->Device "Device0"
[    27.792] (**) |-->Input Device "Keyboard0"
[    27.793] (**) |-->Input Device "Mouse0"
[    27.793] (==) Automatically adding devices
[    27.793] (==) Automatically enabling devices
[    27.827] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    27.827]     Entry deleted from font path.
[    27.856] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    27.856]     Entry deleted from font path.
[    27.856] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    27.857] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.857] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    27.857] (WW) Disabling Keyboard0
[    27.857] (WW) Disabling Mouse0
[    27.857] (II) Loader magic: 0xb770d5a0
[    27.857] (II) Module ABI versions:
[    27.857]     X.Org ANSI C Emulation: 0.4
[    27.857]     X.Org Video Driver: 12.1
[    27.857]     X.Org XInput driver : 16.0
[    27.857]     X.Org Server Extension : 6.0
[    27.858] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    27.858] (II) Open ACPI successful (/var/run/acpid.socket)
[    27.858] (II) LoadModule: "extmod"
[    27.979] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    27.994] (II) Module extmod: vendor="X.Org Foundation"
[    27.994]     compiled for 1.12.4, module version = 1.0.0
[    27.994]     Module class: X.Org Server Extension
[    27.994]     ABI class: X.Org Server Extension, version 6.0
[    27.994] (II) Loading extension SELinux
[    27.994] (II) Loading extension MIT-SCREEN-SAVER
[    27.994] (II) Loading extension XFree86-VidModeExtension
[    27.994] (II) Loading extension XFree86-DGA
[    27.994] (II) Loading extension DPMS
[    27.994] (II) Loading extension XVideo
[    27.994] (II) Loading extension XVideo-MotionCompensation
[    27.994] (II) Loading extension X-Resource
[    27.994] (II) LoadModule: "dbe"
[    27.995] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.011] (II) Module dbe: vendor="X.Org Foundation"
[    28.011]     compiled for 1.12.4, module version = 1.0.0
[    28.011]     Module class: X.Org Server Extension
[    28.011]     ABI class: X.Org Server Extension, version 6.0
[    28.011] (II) Loading extension DOUBLE-BUFFER
[    28.011] (II) LoadModule: "glx"
[    28.011] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    29.462] (II) Module glx: vendor="NVIDIA Corporation"
[    29.462]     compiled for 4.0.2, module version = 1.0.0
[    29.462]     Module class: X.Org Server Extension
[    29.462] (II) NVIDIA GLX Module  304.64  Tue Oct 30 11:31:18 PDT 2012
[    29.462] (II) Loading extension GLX
[    29.462] (II) LoadModule: "record"
[    29.463] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    29.520] (II) Module record: vendor="X.Org Foundation"
[    29.520]     compiled for 1.12.4, module version = 1.13.0
[    29.520]     Module class: X.Org Server Extension
[    29.520]     ABI class: X.Org Server Extension, version 6.0
[    29.520] (II) Loading extension RECORD
[    29.520] (II) LoadModule: "dri"
[    29.520] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    29.533] (II) Module dri: vendor="X.Org Foundation"
[    29.533]     compiled for 1.12.4, module version = 1.0.0
[    29.533]     ABI class: X.Org Server Extension, version 6.0
[    29.533] (II) Loading extension XFree86-DRI
[    29.533] (II) LoadModule: "dri2"
[    29.533] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    29.534] (II) Module dri2: vendor="X.Org Foundation"
[    29.534]     compiled for 1.12.4, module version = 1.2.0
[    29.534]     ABI class: X.Org Server Extension, version 6.0
[    29.534] (II) Loading extension DRI2
[    29.534] (II) LoadModule: "nvidia"
[    29.535] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    29.609] (II) Module nvidia: vendor="NVIDIA Corporation"
[    29.609]     compiled for 4.0.2, module version = 1.0.0
[    29.609]     Module class: X.Org Video Driver
[    29.913] (II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 11:11:05 PDT 2012
[    29.913] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    29.945] (++) using VT number 7

[    29.987] (II) Loading sub module "fb"
[    29.987] (II) LoadModule: "fb"
[    29.988] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.014] (II) Module fb: vendor="X.Org Foundation"
[    30.014]     compiled for 1.12.4, module version = 1.0.0
[    30.014]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.014] (II) Loading sub module "wfb"
[    30.014] (II) LoadModule: "wfb"
[    30.014] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    30.031] (II) Module wfb: vendor="X.Org Foundation"
[    30.031]     compiled for 1.12.4, module version = 1.0.0
[    30.031]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.031] (II) Loading sub module "ramdac"
[    30.031] (II) LoadModule: "ramdac"
[    30.031] (II) Module "ramdac" already built-in
[    30.102] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    30.102] (==) NVIDIA(0): RGB weight 888
[    30.102] (==) NVIDIA(0): Default visual is TrueColor
[    30.102] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.103] (**) NVIDIA(0): Enabling 2D acceleration
[    31.594] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[    31.594] (II) NVIDIA(GPU-0):     Vision stereo.
[    31.621] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[    31.621] (--) NVIDIA(0): Memory: 131072 kBytes
[    31.621] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[    31.621] (II) NVIDIA(0): Detected AGP rate: 8X
[    31.621] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    31.621] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[    31.622] (--) NVIDIA(0):     BenQ G925HDA (CRT-0) (connected)
[    31.622] (--) NVIDIA(0):     CRT-1
[    31.622] (--) NVIDIA(0):     TV-0
[    31.622] (--) NVIDIA(0):     DFP-0
[    31.622] (--) NVIDIA(0):     DFP-1
[    31.622] (--) NVIDIA(0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[    31.622] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    31.622] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    31.622] (--) NVIDIA(0): TV encoder: (null)
[    31.622] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[    31.622] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    31.622] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[    31.622] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    31.622] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    31.622] (**) NVIDIA(0):     device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[    31.622] (**) NVIDIA(0):     been enabled on all display devices.)
[    31.622] (==) NVIDIA(0): 
[    31.622] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    31.622] (==) NVIDIA(0):     will be used as the requested mode.
[    31.622] (==) NVIDIA(0): 
[    31.623] (II) NVIDIA(0): Validated MetaModes:
[    31.623] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    31.623] (II) NVIDIA(0): Virtual screen size determined to be 1368 x 768
[    31.624] (WW) NVIDIA(0): Unable to support custom viewPortOut 1365 x 768 +1 +0
[    31.625] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[    31.625] (--) NVIDIA(0):     option
[    31.625] (--) Depth 24 pixmap format is 32 bpp
[    31.634] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    31.736] (II) Loading extension NV-GLX
[    31.802] (==) NVIDIA(0): Disabling shared memory pixmaps
[    31.802] (==) NVIDIA(0): Backing store disabled
[    31.802] (==) NVIDIA(0): Silken mouse enabled
[    31.802] (**) NVIDIA(0): DPMS enabled
[    31.802] (II) Loading extension NV-CONTROL
[    31.803] (II) Loading extension XINERAMA
[    31.803] (II) Loading sub module "dri2"
[    31.803] (II) LoadModule: "dri2"
[    31.803] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    31.803] (II) Module dri2: vendor="X.Org Foundation"
[    31.803]     compiled for 1.12.4, module version = 1.2.0
[    31.803]     ABI class: X.Org Server Extension, version 6.0
[    31.803] (II) NVIDIA(0): [DRI2] Setup complete
[    31.804] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    31.804] (--) RandR disabled
[    31.804] (II) Initializing built-in extension Generic Event Extension
[    31.804] (II) Initializing built-in extension SHAPE
[    31.804] (II) Initializing built-in extension MIT-SHM
[    31.804] (II) Initializing built-in extension XInputExtension
[    31.804] (II) Initializing built-in extension XTEST
[    31.804] (II) Initializing built-in extension BIG-REQUESTS
[    31.804] (II) Initializing built-in extension SYNC
[    31.804] (II) Initializing built-in extension XKEYBOARD
[    31.804] (II) Initializing built-in extension XC-MISC
[    31.804] (II) Initializing built-in extension SECURITY
[    31.804] (II) Initializing built-in extension XINERAMA
[    31.804] (II) Initializing built-in extension XFIXES
[    31.804] (II) Initializing built-in extension RENDER
[    31.804] (II) Initializing built-in extension RANDR
[    31.804] (II) Initializing built-in extension COMPOSITE
[    31.804] (II) Initializing built-in extension DAMAGE
[    31.804] (II) SELinux: Disabled on system
[    31.809] (II) Initializing extension GLX
[    32.166] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    32.166] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.166] (II) LoadModule: "evdev"
[    32.167] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.180] (II) Module evdev: vendor="X.Org Foundation"
[    32.180]     compiled for 1.12.1, module version = 2.7.0
[    32.180]     Module class: X.Org XInput Driver
[    32.180]     ABI class: X.Org XInput driver, version 16.0
[    32.180] (II) Using input driver 'evdev' for 'Power Button'
[    32.180] (**) Power Button: always reports core events
[    32.180] (**) evdev: Power Button: Device: "/dev/input/event5"
[    32.180] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.180] (--) evdev: Power Button: Found keys
[    32.180] (II) evdev: Power Button: Configuring as keyboard
[    32.180] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    32.180] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.180] (**) Option "xkb_rules" "evdev"
[    32.181] (**) Option "xkb_model" "pc105"
[    32.181] (**) Option "xkb_layout" "pl"
[    32.229] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.229] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.229] (II) Using input driver 'evdev' for 'Power Button'
[    32.229] (**) Power Button: always reports core events
[    32.229] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.229] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.229] (--) evdev: Power Button: Found keys
[    32.229] (II) evdev: Power Button: Configuring as keyboard
[    32.229] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    32.229] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    32.229] (**) Option "xkb_rules" "evdev"
[    32.229] (**) Option "xkb_model" "pc105"
[    32.230] (**) Option "xkb_layout" "pl"
[    32.230] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    32.230] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.231] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.231] (**) Sleep Button: always reports core events
[    32.231] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    32.231] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.231] (--) evdev: Sleep Button: Found keys
[    32.231] (II) evdev: Sleep Button: Configuring as keyboard
[    32.231] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    32.231] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    32.231] (**) Option "xkb_rules" "evdev"
[    32.231] (**) Option "xkb_model" "pc105"
[    32.231] (**) Option "xkb_layout" "pl"
[    32.232] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[    32.232] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.232] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.232] (**) USB USB Keykoard: always reports core events
[    32.232] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[    32.232] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.232] (--) evdev: USB USB Keykoard: Found keys
[    32.232] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.232] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    32.232] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[    32.232] (**) Option "xkb_rules" "evdev"
[    32.232] (**) Option "xkb_model" "pc105"
[    32.232] (**) Option "xkb_layout" "pl"
[    32.233] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[    32.233] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.233] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.234] (**) USB USB Keykoard: always reports core events
[    32.234] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[    32.234] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.234] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[    32.234] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[    32.234] (--) evdev: USB USB Keykoard: Found relative axes
[    32.234] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[    32.234] (--) evdev: USB USB Keykoard: Found absolute axes
[    32.234] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[    32.234] (--) evdev: USB USB Keykoard: Found keys
[    32.234] (II) evdev: USB USB Keykoard: Configuring as mouse
[    32.234] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.234] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[    32.234] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[    32.234] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[    32.234] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    32.234] (**) Option "xkb_rules" "evdev"
[    32.234] (**) Option "xkb_model" "pc105"
[    32.234] (**) Option "xkb_layout" "pl"
[    32.234] (II) evdev: USB USB Keykoard: initialized for relative axes.
[    32.235] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[    32.235] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[    32.235] (**) USB USB Keykoard: (accel) acceleration profile 0
[    32.235] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    32.235] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    32.236] (II) config/udev: Adding input device USB Mouse               (/dev/input/event2)
[    32.236] (**) USB Mouse              : Applying InputClass "evdev pointer catchall"
[    32.236] (II) Using input driver 'evdev' for 'USB Mouse              '
[    32.236] (**) USB Mouse              : always reports core events
[    32.236] (**) evdev: USB Mouse              : Device: "/dev/input/event2"
[    32.236] (--) evdev: USB Mouse              : Vendor 0x5e3 Product 0x1205
[    32.236] (--) evdev: USB Mouse              : Found 9 mouse buttons
[    32.236] (--) evdev: USB Mouse              : Found scroll wheel(s)
[    32.236] (--) evdev: USB Mouse              : Found relative axes
[    32.236] (--) evdev: USB Mouse              : Found x and y relative axes
[    32.236] (II) evdev: USB Mouse              : Configuring as mouse
[    32.236] (II) evdev: USB Mouse              : Adding scrollwheel support
[    32.236] (**) evdev: USB Mouse              : YAxisMapping: buttons 4 and 5
[    32.236] (**) evdev: USB Mouse              : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[    32.236] (II) XINPUT: Adding extended input device "USB Mouse              " (type: MOUSE, id 11)
[    32.236] (II) evdev: USB Mouse              : initialized for relative axes.
[    32.237] (**) USB Mouse              : (accel) keeping acceleration scheme 1
[    32.237] (**) USB Mouse              : (accel) acceleration profile 0
[    32.237] (**) USB Mouse              : (accel) acceleration factor: 2.000
[    32.237] (**) USB Mouse              : (accel) acceleration threshold: 4
[    32.237] (II) config/udev: Adding input device USB Mouse               (/dev/input/mouse0)
[    32.237] (II) No input driver specified, ignoring this device.
[    32.237] (II) This device may have been added with another device file.
[    32.238] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    32.238] (II) No input driver specified, ignoring this device.
[    32.238] (II) This device may have been added with another device file.
[    32.432] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[    32.433] (II) NVIDIA(GPU-0):     Vision stereo.
[    32.433] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.433] (**) NVIDIA(0):     device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[    32.433] (**) NVIDIA(0):     been enabled on all display devices.)
[    35.361] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[    35.361] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.361] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    35.361] (**) NVIDIA(0):     device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[    35.361] (**) NVIDIA(0):     been enabled on all display devices.)
[    47.698] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[    47.698] (II) NVIDIA(GPU-0):     Vision stereo.
[    47.698] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    47.698] (**) NVIDIA(0):     device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[    47.698] (**) NVIDIA(0):     been enabled on all display devices.)
[    50.146] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[    50.146] (II) NVIDIA(GPU-0):     Vision stereo.
[    50.146] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    50.146] (**) NVIDIA(0):     device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[    50.146] (**) NVIDIA(0):     been enabled on all display devices.)
[    52.307] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[    52.307] (II) NVIDIA(GPU-0):     Vision stereo.
[    52.307] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    52.307] (**) NVIDIA(0):     device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[    52.307] (**) NVIDIA(0):     been enabled on all display devices.)

Zapomniałbym, oto dzieło tychże sterowników - [b]xorg.conf[/b]:

Kod:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.48  (buildd@murphy)  Wed Sep 12 11:32:28 UTC 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

jak widać, chyba niczym się nie różni, oprócz zapisu wersji tych sterowników.

@edit: Co najdziwniejsze, pewien wpis spowodował u mnie przemożną chęć uderzenia 98 razy głową w biurko i powiedzeniem 284 razy niecenzuralnego słowa "k***a", dokładniej - ten:

Kod:

[    31.624] (WW) NVIDIA(0): Unable to support custom viewPortOut 1365 x 768 +1 +0

Pytanie - czemu te sterowniki nie chcą działać [b]normalnie[/b], tylko robią takie farmazony?

Ostatnio edytowany przez Shiny (2013-01-06 20:37:21)

ArnVaker · 2013-01-06 20:37:33

[quote=Shiny]Pytanie - czemu te sterowniki nie chcą działać [b]normalnie[/b], tylko robią takie farmazony?[/quote]
To już pytanie do Nvidii, wszak to zamknięte oprogramowanie. No nie wiem co Ci poradzić, można przerabiać znowu to samo, tzn.:
- xorg.conf ze zdefiniowaną rozdzielczością: http://dug.net.pl/tekst/142/nvidia___zamkniete_sterowniki_w_debianie/#xorg_conf
- dodanie modeline: http://dug.net.pl/tekst/125/nvidia___konfiguracja_rozdzielczosci_i_odswiezania_obrazu/
- xorg.conf z wyłączeniem EDID: http://forum.dug.net.pl/viewtopic.php?pid=213532#p213532
Ale pewnie znowu to nic nie da skoro jest to samo, a nowszych sterowników oficjalnie obsługujących tę kartę już nie ma.

Ostatecznie można na forum Nvidii spytać, autorzy tych sterowników się tam udzielają.

[b]EDIT:[/b] Jeszcze widziałem kiedyś sposób z utworzeniem własnego niby EDID, ale to trzeba by poszukać w sieci i też nie wiadomo czy coś da.

Shiny · 2013-01-07 11:08:55

Co do definiowania rozdzielczości, dodania modeline i wyłączenie EDID - nic nie dało, na forum nVidii zadałem [url=https://forums.geforce.com/default/topic/527027/issue-with-set-native-resolution-in-benq-g925hda-1366x768-and-geforce-6600-gt-on-debian-wheezy/?offset=3#3727480]pytanie[/url] - brak odzewu, a jak już się odzew znalazł, to podali mi i tak niedziałającą rzecz...

W takim razie pozostaje tylko stworzenie własnego EDID, ale gdy go wyeksportowałem, to widzę tylko system szesnastkowy:

Kod:

00 ff ff ff ff ff ff 00 09 d1 43 78 45 54 00 00 0a 15 01 03 0e 29 17 78 2e 3d 85 a6 56 4a 9a 24 12 50 54 a5 6a 80 71 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 66 21 56 aa 51 00 1e 30 46 8f 33 00 9a e6 10 00 00 1e 00 00 00 ff 00 39 33 42 30 36 38 39 32 30 31 39 0a 20 00 00 00 fd 00 32 4c 1e 3f 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 42 65 6e 51 20 47 39 32 35 48 44 41 0a 00 f1

który nawet po konwersji [url=http://home.paulschou.net/tools/xlate/]tym konwerterem[/url] na słowa:

Kod:

�ÿÿÿÿÿÿ�    ÑCxET��
)x.=�¦VJ�$PTj�q�f!VªQ�0F�3��æ�����ÿ�93B06892019
 ���ý�2L?�
      ���ü�BenQ G925HDA
�ñ

pozostawia niewiele do życzenia i zrozumienia.

Ostatnio edytowany przez Shiny (2013-01-07 11:10:50)

ArnVaker · 2013-01-07 12:18:31

Właściwie miałem na myśli to forum: https://devtalk.nvidia.com/default/board/98/linux/ :)

PS Masz może loga z użycia xorg.conf z wyłączeniem EDID?

Shiny · 2013-01-07 13:23:04

Mam i xorga i log (stworzone rzecz jasna teraz, wyłączyłem tylko i wyłącznie EDID i... mam rozdzielczość ekranu [b]640x480[/b]). Xorg.conf:

Kod:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.48  (buildd@murphy)  Wed Sep 12 11:32:28 UTC 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    ModeLine       "1366x768" 85.5 1366 1436 1579 1792 768 771 774 798 +hsync +vsync
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
    Option          "UseEDID" "false"
EndSection

Log:

Kod:

[    28.388] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    28.389] X Protocol Version 11, Revision 0
[    28.389] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    28.389] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    28.389] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[    28.389] Build Date: 29 November 2012  08:52:43PM
[    28.389] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    28.389] Current version of pixman: 0.26.0
[    28.389]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    28.389] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.389] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  7 13:20:02 2013
[    28.409] (==) Using config file: "/etc/X11/xorg.conf"
[    28.409] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.445] (==) ServerLayout "Layout0"
[    28.445] (**) |-->Screen "Screen0" (0)
[    28.445] (**) |   |-->Monitor "Monitor0"
[    28.456] (**) |   |-->Device "Device0"
[    28.456] (**) |-->Input Device "Keyboard0"
[    28.456] (**) |-->Input Device "Mouse0"
[    28.456] (==) Automatically adding devices
[    28.456] (==) Automatically enabling devices
[    28.498] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.498]     Entry deleted from font path.
[    28.528] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    28.528]     Entry deleted from font path.
[    28.528] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    28.528] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.528] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    28.528] (WW) Disabling Keyboard0
[    28.528] (WW) Disabling Mouse0
[    28.528] (II) Loader magic: 0xb773d5a0
[    28.528] (II) Module ABI versions:
[    28.528]     X.Org ANSI C Emulation: 0.4
[    28.528]     X.Org Video Driver: 12.1
[    28.528]     X.Org XInput driver : 16.0
[    28.528]     X.Org Server Extension : 6.0
[    28.529] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    28.529] (II) Open ACPI successful (/var/run/acpid.socket)
[    28.530] (II) LoadModule: "extmod"
[    28.708] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.724] (II) Module extmod: vendor="X.Org Foundation"
[    28.724]     compiled for 1.12.4, module version = 1.0.0
[    28.724]     Module class: X.Org Server Extension
[    28.724]     ABI class: X.Org Server Extension, version 6.0
[    28.724] (II) Loading extension SELinux
[    28.724] (II) Loading extension MIT-SCREEN-SAVER
[    28.724] (II) Loading extension XFree86-VidModeExtension
[    28.724] (II) Loading extension XFree86-DGA
[    28.724] (II) Loading extension DPMS
[    28.724] (II) Loading extension XVideo
[    28.724] (II) Loading extension XVideo-MotionCompensation
[    28.724] (II) Loading extension X-Resource
[    28.724] (II) LoadModule: "dbe"
[    28.725] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.740] (II) Module dbe: vendor="X.Org Foundation"
[    28.740]     compiled for 1.12.4, module version = 1.0.0
[    28.740]     Module class: X.Org Server Extension
[    28.740]     ABI class: X.Org Server Extension, version 6.0
[    28.740] (II) Loading extension DOUBLE-BUFFER
[    28.741] (II) LoadModule: "glx"
[    28.741] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    30.500] (II) Module glx: vendor="NVIDIA Corporation"
[    30.500]     compiled for 4.0.2, module version = 1.0.0
[    30.500]     Module class: X.Org Server Extension
[    30.500] (II) NVIDIA GLX Module  304.64  Tue Oct 30 11:31:18 PDT 2012
[    30.500] (II) Loading extension GLX
[    30.500] (II) LoadModule: "record"
[    30.501] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    30.599] (II) Module record: vendor="X.Org Foundation"
[    30.599]     compiled for 1.12.4, module version = 1.13.0
[    30.599]     Module class: X.Org Server Extension
[    30.600]     ABI class: X.Org Server Extension, version 6.0
[    30.600] (II) Loading extension RECORD
[    30.600] (II) LoadModule: "dri"
[    30.600] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    30.692] (II) Module dri: vendor="X.Org Foundation"
[    30.692]     compiled for 1.12.4, module version = 1.0.0
[    30.692]     ABI class: X.Org Server Extension, version 6.0
[    30.692] (II) Loading extension XFree86-DRI
[    30.692] (II) LoadModule: "dri2"
[    30.692] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.699] (II) Module dri2: vendor="X.Org Foundation"
[    30.699]     compiled for 1.12.4, module version = 1.2.0
[    30.699]     ABI class: X.Org Server Extension, version 6.0
[    30.699] (II) Loading extension DRI2
[    30.699] (II) LoadModule: "nvidia"
[    30.699] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    30.858] (II) Module nvidia: vendor="NVIDIA Corporation"
[    30.859]     compiled for 4.0.2, module version = 1.0.0
[    30.859]     Module class: X.Org Video Driver
[    30.933] (II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 11:11:05 PDT 2012
[    30.933] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    30.959] (++) using VT number 7

[    31.000] (II) Loading sub module "fb"
[    31.000] (II) LoadModule: "fb"
[    31.001] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.054] (II) Module fb: vendor="X.Org Foundation"
[    31.054]     compiled for 1.12.4, module version = 1.0.0
[    31.054]     ABI class: X.Org ANSI C Emulation, version 0.4
[    31.054] (II) Loading sub module "wfb"
[    31.054] (II) LoadModule: "wfb"
[    31.055] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    31.069] (II) Module wfb: vendor="X.Org Foundation"
[    31.069]     compiled for 1.12.4, module version = 1.0.0
[    31.069]     ABI class: X.Org ANSI C Emulation, version 0.4
[    31.069] (II) Loading sub module "ramdac"
[    31.069] (II) LoadModule: "ramdac"
[    31.069] (II) Module "ramdac" already built-in
[    31.082] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    31.082] (==) NVIDIA(0): RGB weight 888
[    31.082] (==) NVIDIA(0): Default visual is TrueColor
[    31.082] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    31.082] (**) NVIDIA(0): Option "UseEDID" "false"
[    31.082] (**) NVIDIA(0): Enabling 2D acceleration
[    31.082] (**) NVIDIA(0): Ignoring EDIDs
[    32.521] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    32.543] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[    32.543] (--) NVIDIA(0): Memory: 131072 kBytes
[    32.543] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[    32.543] (II) NVIDIA(0): Detected AGP rate: 8X
[    32.543] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    32.543] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[    32.543] (--) NVIDIA(0):     CRT-0 (connected)
[    32.543] (--) NVIDIA(0):     CRT-1
[    32.543] (--) NVIDIA(0):     TV-0
[    32.543] (--) NVIDIA(0):     DFP-0
[    32.543] (--) NVIDIA(0):     DFP-1
[    32.543] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    32.543] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    32.543] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    32.543] (--) NVIDIA(0): TV encoder: (null)
[    32.543] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[    32.543] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    32.543] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[    32.543] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    32.543] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.543] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    32.543] (**) NVIDIA(0):     all display devices.)
[    32.544] (==) NVIDIA(0): 
[    32.544] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    32.544] (==) NVIDIA(0):     will be used as the requested mode.
[    32.544] (==) NVIDIA(0): 
[    32.544] (II) NVIDIA(0): Validated MetaModes:
[    32.544] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    32.544] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    32.545] (WW) NVIDIA(0): Unable to support custom viewPortOut 640 x 360 +0 +60
[    32.546] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[    32.546] (WW) NVIDIA(0):     from CRT-0's EDID.
[    32.546] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    32.546] (--) Depth 24 pixmap format is 32 bpp
[    32.555] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    32.630] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[    32.630] (II) Loading extension NV-GLX
[    32.696] (==) NVIDIA(0): Disabling shared memory pixmaps
[    32.696] (==) NVIDIA(0): Backing store disabled
[    32.696] (==) NVIDIA(0): Silken mouse enabled
[    32.696] (**) NVIDIA(0): DPMS enabled
[    32.696] (II) Loading extension NV-CONTROL
[    32.697] (II) Loading extension XINERAMA
[    32.697] (II) Loading sub module "dri2"
[    32.697] (II) LoadModule: "dri2"
[    32.698] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    32.698] (II) Module dri2: vendor="X.Org Foundation"
[    32.698]     compiled for 1.12.4, module version = 1.2.0
[    32.698]     ABI class: X.Org Server Extension, version 6.0
[    32.698] (II) NVIDIA(0): [DRI2] Setup complete
[    32.698] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    32.698] (--) RandR disabled
[    32.698] (II) Initializing built-in extension Generic Event Extension
[    32.698] (II) Initializing built-in extension SHAPE
[    32.698] (II) Initializing built-in extension MIT-SHM
[    32.698] (II) Initializing built-in extension XInputExtension
[    32.698] (II) Initializing built-in extension XTEST
[    32.698] (II) Initializing built-in extension BIG-REQUESTS
[    32.698] (II) Initializing built-in extension SYNC
[    32.698] (II) Initializing built-in extension XKEYBOARD
[    32.698] (II) Initializing built-in extension XC-MISC
[    32.698] (II) Initializing built-in extension SECURITY
[    32.698] (II) Initializing built-in extension XINERAMA
[    32.698] (II) Initializing built-in extension XFIXES
[    32.698] (II) Initializing built-in extension RENDER
[    32.698] (II) Initializing built-in extension RANDR
[    32.698] (II) Initializing built-in extension COMPOSITE
[    32.698] (II) Initializing built-in extension DAMAGE
[    32.698] (II) SELinux: Disabled on system
[    32.703] (II) Initializing extension GLX
[    33.046] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    33.046] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.046] (II) LoadModule: "evdev"
[    33.046] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    33.060] (II) Module evdev: vendor="X.Org Foundation"
[    33.060]     compiled for 1.12.1, module version = 2.7.0
[    33.060]     Module class: X.Org XInput Driver
[    33.060]     ABI class: X.Org XInput driver, version 16.0
[    33.060] (II) Using input driver 'evdev' for 'Power Button'
[    33.060] (**) Power Button: always reports core events
[    33.060] (**) evdev: Power Button: Device: "/dev/input/event5"
[    33.060] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.060] (--) evdev: Power Button: Found keys
[    33.060] (II) evdev: Power Button: Configuring as keyboard
[    33.060] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    33.060] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.060] (**) Option "xkb_rules" "evdev"
[    33.060] (**) Option "xkb_model" "pc105"
[    33.060] (**) Option "xkb_layout" "pl"
[    33.110] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    33.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.110] (II) Using input driver 'evdev' for 'Power Button'
[    33.110] (**) Power Button: always reports core events
[    33.110] (**) evdev: Power Button: Device: "/dev/input/event3"
[    33.110] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.110] (--) evdev: Power Button: Found keys
[    33.110] (II) evdev: Power Button: Configuring as keyboard
[    33.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    33.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    33.110] (**) Option "xkb_rules" "evdev"
[    33.110] (**) Option "xkb_model" "pc105"
[    33.110] (**) Option "xkb_layout" "pl"
[    33.111] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    33.111] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    33.111] (II) Using input driver 'evdev' for 'Sleep Button'
[    33.111] (**) Sleep Button: always reports core events
[    33.111] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    33.111] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    33.111] (--) evdev: Sleep Button: Found keys
[    33.111] (II) evdev: Sleep Button: Configuring as keyboard
[    33.112] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    33.112] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    33.112] (**) Option "xkb_rules" "evdev"
[    33.112] (**) Option "xkb_model" "pc105"
[    33.112] (**) Option "xkb_layout" "pl"
[    33.113] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[    33.113] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    33.113] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    33.113] (**) USB USB Keykoard: always reports core events
[    33.113] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[    33.113] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    33.113] (--) evdev: USB USB Keykoard: Found keys
[    33.113] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    33.113] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    33.113] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[    33.113] (**) Option "xkb_rules" "evdev"
[    33.113] (**) Option "xkb_model" "pc105"
[    33.113] (**) Option "xkb_layout" "pl"
[    33.114] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[    33.114] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    33.114] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    33.114] (**) USB USB Keykoard: always reports core events
[    33.114] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[    33.114] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    33.114] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[    33.114] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[    33.114] (--) evdev: USB USB Keykoard: Found relative axes
[    33.114] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[    33.114] (--) evdev: USB USB Keykoard: Found absolute axes
[    33.115] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[    33.115] (--) evdev: USB USB Keykoard: Found keys
[    33.115] (II) evdev: USB USB Keykoard: Configuring as mouse
[    33.115] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    33.115] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[    33.115] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[    33.115] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    33.115] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[    33.115] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    33.115] (**) Option "xkb_rules" "evdev"
[    33.115] (**) Option "xkb_model" "pc105"
[    33.115] (**) Option "xkb_layout" "pl"
[    33.115] (II) evdev: USB USB Keykoard: initialized for relative axes.
[    33.115] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[    33.116] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[    33.116] (**) USB USB Keykoard: (accel) acceleration profile 0
[    33.116] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    33.116] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    33.116] (II) config/udev: Adding input device USB Mouse               (/dev/input/event2)
[    33.116] (**) USB Mouse              : Applying InputClass "evdev pointer catchall"
[    33.116] (II) Using input driver 'evdev' for 'USB Mouse              '
[    33.116] (**) USB Mouse              : always reports core events
[    33.116] (**) evdev: USB Mouse              : Device: "/dev/input/event2"
[    33.117] (--) evdev: USB Mouse              : Vendor 0x5e3 Product 0x1205
[    33.117] (--) evdev: USB Mouse              : Found 9 mouse buttons
[    33.117] (--) evdev: USB Mouse              : Found scroll wheel(s)
[    33.117] (--) evdev: USB Mouse              : Found relative axes
[    33.117] (--) evdev: USB Mouse              : Found x and y relative axes
[    33.117] (II) evdev: USB Mouse              : Configuring as mouse
[    33.117] (II) evdev: USB Mouse              : Adding scrollwheel support
[    33.117] (**) evdev: USB Mouse              : YAxisMapping: buttons 4 and 5
[    33.117] (**) evdev: USB Mouse              : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    33.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[    33.117] (II) XINPUT: Adding extended input device "USB Mouse              " (type: MOUSE, id 11)
[    33.117] (II) evdev: USB Mouse              : initialized for relative axes.
[    33.117] (**) USB Mouse              : (accel) keeping acceleration scheme 1
[    33.117] (**) USB Mouse              : (accel) acceleration profile 0
[    33.117] (**) USB Mouse              : (accel) acceleration factor: 2.000
[    33.117] (**) USB Mouse              : (accel) acceleration threshold: 4
[    33.118] (II) config/udev: Adding input device USB Mouse               (/dev/input/mouse0)
[    33.118] (II) No input driver specified, ignoring this device.
[    33.118] (II) This device may have been added with another device file.
[    33.118] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    33.118] (II) No input driver specified, ignoring this device.
[    33.118] (II) This device may have been added with another device file.
[    33.268] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    33.268] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    33.268] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    33.268] (**) NVIDIA(0):     all display devices.)
[    36.262] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    36.262] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    36.262] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    36.262] (**) NVIDIA(0):     all display devices.)
[    50.309] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    50.309] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    50.309] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    50.309] (**) NVIDIA(0):     all display devices.)
[    52.528] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    52.528] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    52.528] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    52.528] (**) NVIDIA(0):     all display devices.)
[    55.342] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    55.342] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    55.342] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    55.342] (**) NVIDIA(0):     all display devices.)

ArnVaker · 2013-01-07 13:30:18

Chodziło o to żebyś użył tego xorg.conf wstawiając tylko odpowiednie parametry:

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
        HorizSync        30.0 - 81.0
        VertRefresh      56.0 - 75.0
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Option          "UseEDID" "false"
        Option          "metamodes" "1440x900_60"
EndSection

To jest cała zawartość pliku, nie mieszaj tego z innymi xorg.conf.

Shiny · 2013-01-07 13:38:18

Hm... w takim razie nie powinno nikogo zdziwić jeśli napiszę, że rozdzielczość ekranu w tym xorgu, który został przez Ciebie podany, nie zmieniła się ani trochę i wciąż wynosi [b]640x480[/b]. Wygląd xorga:

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Option          "UseEDID" "false"
        Option          "metamodes" "1366x768_60"
EndSection

oraz logów:

Kod:

[    27.939] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    27.939] X Protocol Version 11, Revision 0
[    27.939] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    27.939] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    27.939] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[    27.939] Build Date: 29 November 2012  08:52:43PM
[    27.939] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    27.939] Current version of pixman: 0.26.0
[    27.939]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    27.939] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.939] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  7 13:34:33 2013
[    27.976] (==) Using config file: "/etc/X11/xorg.conf"
[    27.976] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.011] (==) No Layout section.  Using the first Screen section.
[    28.011] (**) |-->Screen "Default Screen" (0)
[    28.011] (**) |   |-->Monitor "Configured Monitor"
[    28.023] (==) No device specified for screen "Default Screen".
    Using the first device section listed.
[    28.023] (**) |   |-->Device "Configured Video Device"
[    28.023] (==) Automatically adding devices
[    28.023] (==) Automatically enabling devices
[    28.057] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.057]     Entry deleted from font path.
[    28.137] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    28.137]     Entry deleted from font path.
[    28.137] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    28.137] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.137] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.137] (II) Loader magic: 0xb77da5a0
[    28.137] (II) Module ABI versions:
[    28.137]     X.Org ANSI C Emulation: 0.4
[    28.137]     X.Org Video Driver: 12.1
[    28.137]     X.Org XInput driver : 16.0
[    28.137]     X.Org Server Extension : 6.0
[    28.138] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    28.138] (II) Open ACPI successful (/var/run/acpid.socket)
[    28.138] (II) LoadModule: "extmod"
[    28.259] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.274] (II) Module extmod: vendor="X.Org Foundation"
[    28.274]     compiled for 1.12.4, module version = 1.0.0
[    28.274]     Module class: X.Org Server Extension
[    28.274]     ABI class: X.Org Server Extension, version 6.0
[    28.274] (II) Loading extension SELinux
[    28.274] (II) Loading extension MIT-SCREEN-SAVER
[    28.274] (II) Loading extension XFree86-VidModeExtension
[    28.274] (II) Loading extension XFree86-DGA
[    28.274] (II) Loading extension DPMS
[    28.274] (II) Loading extension XVideo
[    28.274] (II) Loading extension XVideo-MotionCompensation
[    28.274] (II) Loading extension X-Resource
[    28.274] (II) LoadModule: "dbe"
[    28.275] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.291] (II) Module dbe: vendor="X.Org Foundation"
[    28.291]     compiled for 1.12.4, module version = 1.0.0
[    28.291]     Module class: X.Org Server Extension
[    28.291]     ABI class: X.Org Server Extension, version 6.0
[    28.291] (II) Loading extension DOUBLE-BUFFER
[    28.291] (II) LoadModule: "glx"
[    28.291] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    30.042] (II) Module glx: vendor="NVIDIA Corporation"
[    30.042]     compiled for 4.0.2, module version = 1.0.0
[    30.042]     Module class: X.Org Server Extension
[    30.042] (II) NVIDIA GLX Module  304.64  Tue Oct 30 11:31:18 PDT 2012
[    30.042] (II) Loading extension GLX
[    30.042] (II) LoadModule: "record"
[    30.043] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    30.141] (II) Module record: vendor="X.Org Foundation"
[    30.142]     compiled for 1.12.4, module version = 1.13.0
[    30.142]     Module class: X.Org Server Extension
[    30.142]     ABI class: X.Org Server Extension, version 6.0
[    30.142] (II) Loading extension RECORD
[    30.142] (II) LoadModule: "dri"
[    30.142] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    30.234] (II) Module dri: vendor="X.Org Foundation"
[    30.234]     compiled for 1.12.4, module version = 1.0.0
[    30.234]     ABI class: X.Org Server Extension, version 6.0
[    30.234] (II) Loading extension XFree86-DRI
[    30.234] (II) LoadModule: "dri2"
[    30.234] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.241] (II) Module dri2: vendor="X.Org Foundation"
[    30.241]     compiled for 1.12.4, module version = 1.2.0
[    30.241]     ABI class: X.Org Server Extension, version 6.0
[    30.241] (II) Loading extension DRI2
[    30.241] (II) LoadModule: "nvidia"
[    30.241] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    30.397] (II) Module nvidia: vendor="NVIDIA Corporation"
[    30.398]     compiled for 4.0.2, module version = 1.0.0
[    30.398]     Module class: X.Org Video Driver
[    30.485] (II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 11:11:05 PDT 2012
[    30.485] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    30.509] (++) using VT number 7

[    30.551] (II) Loading sub module "fb"
[    30.551] (II) LoadModule: "fb"
[    30.551] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.570] (II) Module fb: vendor="X.Org Foundation"
[    30.570]     compiled for 1.12.4, module version = 1.0.0
[    30.570]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.570] (II) Loading sub module "wfb"
[    30.570] (II) LoadModule: "wfb"
[    30.586] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    30.611] (II) Module wfb: vendor="X.Org Foundation"
[    30.611]     compiled for 1.12.4, module version = 1.0.0
[    30.611]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.611] (II) Loading sub module "ramdac"
[    30.611] (II) LoadModule: "ramdac"
[    30.611] (II) Module "ramdac" already built-in
[    30.632] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
[    30.632] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    30.632] (==) NVIDIA(0): RGB weight 888
[    30.632] (==) NVIDIA(0): Default visual is TrueColor
[    30.632] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.633] (**) NVIDIA(0): Option "UseEDID" "false"
[    30.633] (**) NVIDIA(0): Option "MetaModes" "1366x768_60"
[    30.633] (**) NVIDIA(0): Enabling 2D acceleration
[    30.633] (**) NVIDIA(0): Ignoring EDIDs
[    32.057] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    32.059] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[    32.059] (--) NVIDIA(0): Memory: 131072 kBytes
[    32.059] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[    32.059] (II) NVIDIA(0): Detected AGP rate: 8X
[    32.059] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    32.059] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[    32.059] (--) NVIDIA(0):     CRT-0 (connected)
[    32.059] (--) NVIDIA(0):     CRT-1
[    32.059] (--) NVIDIA(0):     TV-0
[    32.060] (--) NVIDIA(0):     DFP-0
[    32.060] (--) NVIDIA(0):     DFP-1
[    32.060] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    32.060] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    32.060] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    32.060] (--) NVIDIA(0): TV encoder: (null)
[    32.060] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[    32.060] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    32.060] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[    32.060] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    32.060] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.060] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    32.060] (**) NVIDIA(0):     all display devices.)
[    32.061] (WW) NVIDIA(0): No valid modes for "1366x768_60"; removing.
[    32.061] (WW) NVIDIA(0): 
[    32.061] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[    32.061] (WW) NVIDIA(0):     "nvidia-auto-select".
[    32.061] (WW) NVIDIA(0): 
[    32.061] (II) NVIDIA(0): Validated MetaModes:
[    32.061] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    32.061] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    32.062] (WW) NVIDIA(0): Unable to support custom viewPortOut 640 x 360 +0 +60
[    32.062] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[    32.062] (WW) NVIDIA(0):     from CRT-0's EDID.
[    32.062] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    32.062] (--) Depth 24 pixmap format is 32 bpp
[    32.071] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    32.141] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[    32.141] (II) Loading extension NV-GLX
[    32.188] (==) NVIDIA(0): Disabling shared memory pixmaps
[    32.188] (==) NVIDIA(0): Backing store disabled
[    32.188] (==) NVIDIA(0): Silken mouse enabled
[    32.188] (==) NVIDIA(0): DPMS enabled
[    32.189] (II) Loading extension NV-CONTROL
[    32.189] (II) Loading extension XINERAMA
[    32.189] (II) Loading sub module "dri2"
[    32.189] (II) LoadModule: "dri2"
[    32.190] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    32.190] (II) Module dri2: vendor="X.Org Foundation"
[    32.190]     compiled for 1.12.4, module version = 1.2.0
[    32.190]     ABI class: X.Org Server Extension, version 6.0
[    32.190] (II) NVIDIA(0): [DRI2] Setup complete
[    32.190] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    32.190] (--) RandR disabled
[    32.190] (II) Initializing built-in extension Generic Event Extension
[    32.190] (II) Initializing built-in extension SHAPE
[    32.190] (II) Initializing built-in extension MIT-SHM
[    32.190] (II) Initializing built-in extension XInputExtension
[    32.190] (II) Initializing built-in extension XTEST
[    32.190] (II) Initializing built-in extension BIG-REQUESTS
[    32.190] (II) Initializing built-in extension SYNC
[    32.190] (II) Initializing built-in extension XKEYBOARD
[    32.190] (II) Initializing built-in extension XC-MISC
[    32.190] (II) Initializing built-in extension SECURITY
[    32.190] (II) Initializing built-in extension XINERAMA
[    32.190] (II) Initializing built-in extension XFIXES
[    32.190] (II) Initializing built-in extension RENDER
[    32.190] (II) Initializing built-in extension RANDR
[    32.190] (II) Initializing built-in extension COMPOSITE
[    32.190] (II) Initializing built-in extension DAMAGE
[    32.190] (II) SELinux: Disabled on system
[    32.195] (II) Initializing extension GLX
[    32.538] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    32.538] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.538] (II) LoadModule: "evdev"
[    32.539] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.552] (II) Module evdev: vendor="X.Org Foundation"
[    32.552]     compiled for 1.12.1, module version = 2.7.0
[    32.552]     Module class: X.Org XInput Driver
[    32.552]     ABI class: X.Org XInput driver, version 16.0
[    32.552] (II) Using input driver 'evdev' for 'Power Button'
[    32.552] (**) Power Button: always reports core events
[    32.552] (**) evdev: Power Button: Device: "/dev/input/event5"
[    32.552] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.552] (--) evdev: Power Button: Found keys
[    32.552] (II) evdev: Power Button: Configuring as keyboard
[    32.552] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    32.552] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.552] (**) Option "xkb_rules" "evdev"
[    32.552] (**) Option "xkb_model" "pc105"
[    32.552] (**) Option "xkb_layout" "pl"
[    32.602] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.602] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.602] (II) Using input driver 'evdev' for 'Power Button'
[    32.602] (**) Power Button: always reports core events
[    32.602] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.602] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.602] (--) evdev: Power Button: Found keys
[    32.602] (II) evdev: Power Button: Configuring as keyboard
[    32.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    32.602] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    32.602] (**) Option "xkb_rules" "evdev"
[    32.602] (**) Option "xkb_model" "pc105"
[    32.602] (**) Option "xkb_layout" "pl"
[    32.603] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    32.603] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.603] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.603] (**) Sleep Button: always reports core events
[    32.603] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    32.603] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.603] (--) evdev: Sleep Button: Found keys
[    32.603] (II) evdev: Sleep Button: Configuring as keyboard
[    32.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    32.604] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    32.604] (**) Option "xkb_rules" "evdev"
[    32.604] (**) Option "xkb_model" "pc105"
[    32.604] (**) Option "xkb_layout" "pl"
[    32.605] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[    32.605] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.605] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.605] (**) USB USB Keykoard: always reports core events
[    32.605] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[    32.605] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.605] (--) evdev: USB USB Keykoard: Found keys
[    32.605] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.605] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    32.605] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[    32.605] (**) Option "xkb_rules" "evdev"
[    32.605] (**) Option "xkb_model" "pc105"
[    32.605] (**) Option "xkb_layout" "pl"
[    32.606] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[    32.606] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.606] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.606] (**) USB USB Keykoard: always reports core events
[    32.606] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[    32.606] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.606] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[    32.606] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[    32.606] (--) evdev: USB USB Keykoard: Found relative axes
[    32.606] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[    32.606] (--) evdev: USB USB Keykoard: Found absolute axes
[    32.607] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[    32.607] (--) evdev: USB USB Keykoard: Found keys
[    32.607] (II) evdev: USB USB Keykoard: Configuring as mouse
[    32.607] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.607] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[    32.607] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[    32.607] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.607] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[    32.607] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    32.607] (**) Option "xkb_rules" "evdev"
[    32.607] (**) Option "xkb_model" "pc105"
[    32.607] (**) Option "xkb_layout" "pl"
[    32.607] (II) evdev: USB USB Keykoard: initialized for relative axes.
[    32.607] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[    32.608] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[    32.608] (**) USB USB Keykoard: (accel) acceleration profile 0
[    32.608] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    32.608] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    32.608] (II) config/udev: Adding input device USB Mouse               (/dev/input/event2)
[    32.608] (**) USB Mouse              : Applying InputClass "evdev pointer catchall"
[    32.608] (II) Using input driver 'evdev' for 'USB Mouse              '
[    32.608] (**) USB Mouse              : always reports core events
[    32.609] (**) evdev: USB Mouse              : Device: "/dev/input/event2"
[    32.609] (--) evdev: USB Mouse              : Vendor 0x5e3 Product 0x1205
[    32.609] (--) evdev: USB Mouse              : Found 9 mouse buttons
[    32.609] (--) evdev: USB Mouse              : Found scroll wheel(s)
[    32.609] (--) evdev: USB Mouse              : Found relative axes
[    32.609] (--) evdev: USB Mouse              : Found x and y relative axes
[    32.609] (II) evdev: USB Mouse              : Configuring as mouse
[    32.609] (II) evdev: USB Mouse              : Adding scrollwheel support
[    32.609] (**) evdev: USB Mouse              : YAxisMapping: buttons 4 and 5
[    32.609] (**) evdev: USB Mouse              : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[    32.609] (II) XINPUT: Adding extended input device "USB Mouse              " (type: MOUSE, id 11)
[    32.609] (II) evdev: USB Mouse              : initialized for relative axes.
[    32.609] (**) USB Mouse              : (accel) keeping acceleration scheme 1
[    32.609] (**) USB Mouse              : (accel) acceleration profile 0
[    32.609] (**) USB Mouse              : (accel) acceleration factor: 2.000
[    32.609] (**) USB Mouse              : (accel) acceleration threshold: 4
[    32.610] (II) config/udev: Adding input device USB Mouse               (/dev/input/mouse0)
[    32.610] (II) No input driver specified, ignoring this device.
[    32.610] (II) This device may have been added with another device file.
[    32.610] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    32.610] (II) No input driver specified, ignoring this device.
[    32.610] (II) This device may have been added with another device file.
[    32.759] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    32.759] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.759] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    32.759] (**) NVIDIA(0):     all display devices.)
[    35.796] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    35.796] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    35.796] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    35.796] (**) NVIDIA(0):     all display devices.)
[    49.917] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    49.917] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    49.917] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    49.917] (**) NVIDIA(0):     all display devices.)
[    52.553] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    52.553] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    52.553] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    52.554] (**) NVIDIA(0):     all display devices.)
[    54.605] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    54.605] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    54.605] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    54.605] (**) NVIDIA(0):     all display devices.)

Ostatnio edytowany przez Shiny (2013-01-07 13:41:55)

ArnVaker · 2013-01-07 13:52:19

Te wartości co wpisałeś wydają mi się niemożliwe, prędzej:

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
        HorizSync        30.0 - 63.0
        VertRefresh      50.0 - 76.0
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Option          "UseEDID" "false"
        Option          "metamodes" "1366x768_60"
EndSection

Shiny · 2013-01-07 14:04:05

No cóż, przy Twoich wartościach [b]niby[/b] mam już "w miarę" normalne rozdzielczości, poza natywną. Logi:

Kod:

[    27.908] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    27.908] X Protocol Version 11, Revision 0
[    27.908] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    27.908] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    27.908] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[    27.908] Build Date: 29 November 2012  08:52:43PM
[    27.908] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    27.908] Current version of pixman: 0.26.0
[    27.908]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    27.908] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.909] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  7 14:01:25 2013
[    27.928] (==) Using config file: "/etc/X11/xorg.conf"
[    27.928] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.962] (==) No Layout section.  Using the first Screen section.
[    27.962] (**) |-->Screen "Default Screen" (0)
[    27.962] (**) |   |-->Monitor "Configured Monitor"
[    27.974] (==) No device specified for screen "Default Screen".
    Using the first device section listed.
[    27.975] (**) |   |-->Device "Configured Video Device"
[    27.975] (==) Automatically adding devices
[    27.975] (==) Automatically enabling devices
[    28.025] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.025]     Entry deleted from font path.
[    28.047] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    28.047]     Entry deleted from font path.
[    28.047] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    28.047] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.047] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.047] (II) Loader magic: 0xb77c55a0
[    28.047] (II) Module ABI versions:
[    28.047]     X.Org ANSI C Emulation: 0.4
[    28.047]     X.Org Video Driver: 12.1
[    28.047]     X.Org XInput driver : 16.0
[    28.047]     X.Org Server Extension : 6.0
[    28.048] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    28.048] (II) Open ACPI successful (/var/run/acpid.socket)
[    28.049] (II) LoadModule: "extmod"
[    28.202] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.218] (II) Module extmod: vendor="X.Org Foundation"
[    28.218]     compiled for 1.12.4, module version = 1.0.0
[    28.218]     Module class: X.Org Server Extension
[    28.218]     ABI class: X.Org Server Extension, version 6.0
[    28.218] (II) Loading extension SELinux
[    28.218] (II) Loading extension MIT-SCREEN-SAVER
[    28.218] (II) Loading extension XFree86-VidModeExtension
[    28.218] (II) Loading extension XFree86-DGA
[    28.218] (II) Loading extension DPMS
[    28.218] (II) Loading extension XVideo
[    28.218] (II) Loading extension XVideo-MotionCompensation
[    28.218] (II) Loading extension X-Resource
[    28.218] (II) LoadModule: "dbe"
[    28.219] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.234] (II) Module dbe: vendor="X.Org Foundation"
[    28.234]     compiled for 1.12.4, module version = 1.0.0
[    28.234]     Module class: X.Org Server Extension
[    28.234]     ABI class: X.Org Server Extension, version 6.0
[    28.235] (II) Loading extension DOUBLE-BUFFER
[    28.235] (II) LoadModule: "glx"
[    28.235] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    29.644] (II) Module glx: vendor="NVIDIA Corporation"
[    29.644]     compiled for 4.0.2, module version = 1.0.0
[    29.644]     Module class: X.Org Server Extension
[    29.644] (II) NVIDIA GLX Module  304.64  Tue Oct 30 11:31:18 PDT 2012
[    29.644] (II) Loading extension GLX
[    29.644] (II) LoadModule: "record"
[    29.645] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    29.677] (II) Module record: vendor="X.Org Foundation"
[    29.677]     compiled for 1.12.4, module version = 1.13.0
[    29.677]     Module class: X.Org Server Extension
[    29.677]     ABI class: X.Org Server Extension, version 6.0
[    29.677] (II) Loading extension RECORD
[    29.677] (II) LoadModule: "dri"
[    29.677] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    29.690] (II) Module dri: vendor="X.Org Foundation"
[    29.690]     compiled for 1.12.4, module version = 1.0.0
[    29.690]     ABI class: X.Org Server Extension, version 6.0
[    29.690] (II) Loading extension XFree86-DRI
[    29.690] (II) LoadModule: "dri2"
[    29.691] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    29.691] (II) Module dri2: vendor="X.Org Foundation"
[    29.691]     compiled for 1.12.4, module version = 1.2.0
[    29.691]     ABI class: X.Org Server Extension, version 6.0
[    29.691] (II) Loading extension DRI2
[    29.691] (II) LoadModule: "nvidia"
[    29.691] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    29.941] (II) Module nvidia: vendor="NVIDIA Corporation"
[    29.941]     compiled for 4.0.2, module version = 1.0.0
[    29.941]     Module class: X.Org Video Driver
[    30.038] (II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 11:11:05 PDT 2012
[    30.038] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    30.044] (++) using VT number 7

[    30.128] (II) Loading sub module "fb"
[    30.355] (II) LoadModule: "fb"
[    30.356] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.380] (II) Module fb: vendor="X.Org Foundation"
[    30.380]     compiled for 1.12.4, module version = 1.0.0
[    30.381]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.381] (II) Loading sub module "wfb"
[    30.381] (II) LoadModule: "wfb"
[    30.381] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    30.388] (II) Module wfb: vendor="X.Org Foundation"
[    30.388]     compiled for 1.12.4, module version = 1.0.0
[    30.388]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.388] (II) Loading sub module "ramdac"
[    30.388] (II) LoadModule: "ramdac"
[    30.388] (II) Module "ramdac" already built-in
[    30.417] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
[    30.417] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    30.418] (==) NVIDIA(0): RGB weight 888
[    30.418] (==) NVIDIA(0): Default visual is TrueColor
[    30.418] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.418] (**) NVIDIA(0): Option "UseEDID" "false"
[    30.418] (**) NVIDIA(0): Option "MetaModes" "1366x768_60"
[    30.418] (**) NVIDIA(0): Enabling 2D acceleration
[    30.418] (**) NVIDIA(0): Ignoring EDIDs
[    31.841] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    31.844] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[    31.844] (--) NVIDIA(0): Memory: 131072 kBytes
[    31.844] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[    31.844] (II) NVIDIA(0): Detected AGP rate: 8X
[    31.844] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    31.844] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[    31.844] (--) NVIDIA(0):     CRT-0 (connected)
[    31.844] (--) NVIDIA(0):     CRT-1
[    31.844] (--) NVIDIA(0):     TV-0
[    31.844] (--) NVIDIA(0):     DFP-0
[    31.844] (--) NVIDIA(0):     DFP-1
[    31.844] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    31.844] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    31.844] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    31.844] (--) NVIDIA(0): TV encoder: (null)
[    31.844] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[    31.844] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    31.844] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[    31.845] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    31.845] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    31.845] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    31.845] (**) NVIDIA(0):     all display devices.)
[    31.846] (WW) NVIDIA(0): No valid modes for "1366x768_60"; removing.
[    31.846] (WW) NVIDIA(0): 
[    31.846] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[    31.846] (WW) NVIDIA(0):     "nvidia-auto-select".
[    31.846] (WW) NVIDIA(0): 
[    31.846] (II) NVIDIA(0): Validated MetaModes:
[    31.846] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    31.846] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    31.851] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[    31.852] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[    31.852] (WW) NVIDIA(0):     from CRT-0's EDID.
[    31.852] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    31.852] (--) Depth 24 pixmap format is 32 bpp
[    31.861] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    31.968] (II) Loading extension NV-GLX
[    32.034] (==) NVIDIA(0): Disabling shared memory pixmaps
[    32.034] (==) NVIDIA(0): Backing store disabled
[    32.034] (==) NVIDIA(0): Silken mouse enabled
[    32.034] (==) NVIDIA(0): DPMS enabled
[    32.035] (II) Loading extension NV-CONTROL
[    32.035] (II) Loading extension XINERAMA
[    32.035] (II) Loading sub module "dri2"
[    32.035] (II) LoadModule: "dri2"
[    32.036] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    32.036] (II) Module dri2: vendor="X.Org Foundation"
[    32.036]     compiled for 1.12.4, module version = 1.2.0
[    32.036]     ABI class: X.Org Server Extension, version 6.0
[    32.036] (II) NVIDIA(0): [DRI2] Setup complete
[    32.036] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    32.036] (--) RandR disabled
[    32.036] (II) Initializing built-in extension Generic Event Extension
[    32.036] (II) Initializing built-in extension SHAPE
[    32.036] (II) Initializing built-in extension MIT-SHM
[    32.036] (II) Initializing built-in extension XInputExtension
[    32.036] (II) Initializing built-in extension XTEST
[    32.036] (II) Initializing built-in extension BIG-REQUESTS
[    32.036] (II) Initializing built-in extension SYNC
[    32.036] (II) Initializing built-in extension XKEYBOARD
[    32.036] (II) Initializing built-in extension XC-MISC
[    32.036] (II) Initializing built-in extension SECURITY
[    32.036] (II) Initializing built-in extension XINERAMA
[    32.036] (II) Initializing built-in extension XFIXES
[    32.036] (II) Initializing built-in extension RENDER
[    32.036] (II) Initializing built-in extension RANDR
[    32.036] (II) Initializing built-in extension COMPOSITE
[    32.036] (II) Initializing built-in extension DAMAGE
[    32.036] (II) SELinux: Disabled on system
[    32.041] (II) Initializing extension GLX
[    32.390] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    32.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.390] (II) LoadModule: "evdev"
[    32.390] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.404] (II) Module evdev: vendor="X.Org Foundation"
[    32.404]     compiled for 1.12.1, module version = 2.7.0
[    32.404]     Module class: X.Org XInput Driver
[    32.404]     ABI class: X.Org XInput driver, version 16.0
[    32.404] (II) Using input driver 'evdev' for 'Power Button'
[    32.404] (**) Power Button: always reports core events
[    32.404] (**) evdev: Power Button: Device: "/dev/input/event5"
[    32.404] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.404] (--) evdev: Power Button: Found keys
[    32.404] (II) evdev: Power Button: Configuring as keyboard
[    32.404] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    32.404] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.404] (**) Option "xkb_rules" "evdev"
[    32.404] (**) Option "xkb_model" "pc105"
[    32.404] (**) Option "xkb_layout" "pl"
[    32.454] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.454] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.454] (II) Using input driver 'evdev' for 'Power Button'
[    32.454] (**) Power Button: always reports core events
[    32.454] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.454] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.454] (--) evdev: Power Button: Found keys
[    32.454] (II) evdev: Power Button: Configuring as keyboard
[    32.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    32.454] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    32.454] (**) Option "xkb_rules" "evdev"
[    32.454] (**) Option "xkb_model" "pc105"
[    32.454] (**) Option "xkb_layout" "pl"
[    32.455] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    32.455] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.455] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.455] (**) Sleep Button: always reports core events
[    32.455] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    32.455] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.455] (--) evdev: Sleep Button: Found keys
[    32.455] (II) evdev: Sleep Button: Configuring as keyboard
[    32.455] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    32.455] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    32.456] (**) Option "xkb_rules" "evdev"
[    32.456] (**) Option "xkb_model" "pc105"
[    32.456] (**) Option "xkb_layout" "pl"
[    32.457] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[    32.457] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.457] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.457] (**) USB USB Keykoard: always reports core events
[    32.457] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[    32.457] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.457] (--) evdev: USB USB Keykoard: Found keys
[    32.457] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.457] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    32.457] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[    32.457] (**) Option "xkb_rules" "evdev"
[    32.457] (**) Option "xkb_model" "pc105"
[    32.457] (**) Option "xkb_layout" "pl"
[    32.458] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[    32.458] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.458] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.458] (**) USB USB Keykoard: always reports core events
[    32.458] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[    32.458] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.458] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[    32.458] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[    32.458] (--) evdev: USB USB Keykoard: Found relative axes
[    32.458] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[    32.458] (--) evdev: USB USB Keykoard: Found absolute axes
[    32.458] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[    32.458] (--) evdev: USB USB Keykoard: Found keys
[    32.459] (II) evdev: USB USB Keykoard: Configuring as mouse
[    32.459] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.459] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[    32.459] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[    32.459] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.459] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[    32.459] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    32.459] (**) Option "xkb_rules" "evdev"
[    32.459] (**) Option "xkb_model" "pc105"
[    32.459] (**) Option "xkb_layout" "pl"
[    32.459] (II) evdev: USB USB Keykoard: initialized for relative axes.
[    32.459] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[    32.460] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[    32.460] (**) USB USB Keykoard: (accel) acceleration profile 0
[    32.460] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    32.460] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    32.460] (II) config/udev: Adding input device USB Mouse               (/dev/input/event2)
[    32.460] (**) USB Mouse              : Applying InputClass "evdev pointer catchall"
[    32.460] (II) Using input driver 'evdev' for 'USB Mouse              '
[    32.461] (**) USB Mouse              : always reports core events
[    32.461] (**) evdev: USB Mouse              : Device: "/dev/input/event2"
[    32.461] (--) evdev: USB Mouse              : Vendor 0x5e3 Product 0x1205
[    32.461] (--) evdev: USB Mouse              : Found 9 mouse buttons
[    32.461] (--) evdev: USB Mouse              : Found scroll wheel(s)
[    32.461] (--) evdev: USB Mouse              : Found relative axes
[    32.461] (--) evdev: USB Mouse              : Found x and y relative axes
[    32.461] (II) evdev: USB Mouse              : Configuring as mouse
[    32.461] (II) evdev: USB Mouse              : Adding scrollwheel support
[    32.461] (**) evdev: USB Mouse              : YAxisMapping: buttons 4 and 5
[    32.461] (**) evdev: USB Mouse              : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.461] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[    32.461] (II) XINPUT: Adding extended input device "USB Mouse              " (type: MOUSE, id 11)
[    32.461] (II) evdev: USB Mouse              : initialized for relative axes.
[    32.461] (**) USB Mouse              : (accel) keeping acceleration scheme 1
[    32.461] (**) USB Mouse              : (accel) acceleration profile 0
[    32.461] (**) USB Mouse              : (accel) acceleration factor: 2.000
[    32.461] (**) USB Mouse              : (accel) acceleration threshold: 4
[    32.462] (II) config/udev: Adding input device USB Mouse               (/dev/input/mouse0)
[    32.462] (II) No input driver specified, ignoring this device.
[    32.462] (II) This device may have been added with another device file.
[    32.462] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    32.462] (II) No input driver specified, ignoring this device.
[    32.462] (II) This device may have been added with another device file.
[    32.611] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    32.611] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.611] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    32.611] (**) NVIDIA(0):     all display devices.)
[    35.614] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    35.614] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    35.614] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    35.614] (**) NVIDIA(0):     all display devices.)
[    49.581] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    49.581] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    49.581] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    49.581] (**) NVIDIA(0):     all display devices.)
[    51.800] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    51.800] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    51.800] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    51.800] (**) NVIDIA(0):     all display devices.)
[    53.939] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    53.939] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    53.939] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    53.939] (**) NVIDIA(0):     all display devices.)
[    77.369] (II) NVIDIA(0): Setting mode "Unknown-0:1360x768"
[    79.984] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[    79.984] (WW) NVIDIA(0):     viewport height 768; adjusting

Ostatnio edytowany przez Shiny (2013-01-07 14:05:49)

sqrtek · 2013-01-07 14:08:20

Gdyby nie udało Ci się ustawić rozdzielczości za pomocą xorga, to może warto by spróbować z xrandr? :)

Shiny · 2013-01-07 14:18:44

W jakim sensie "użyć xrandr"? Bo jeśli w takim:

Kod:

xrandr --newmode "1366x768" 60 1366 1436 1579 1792 768 771 774 798 +hsync +vsync

to niestety odpada, bo poza ponownym ustawieniem przez monitor rozdzielczości 1360x768 nic się nie dzieje.

@edit: Ogólnie samo użycie xrandr w terminalu powoduje odświeżenie obrazu, a wypluwa taki wynik:

Kod:

xrandr
Screen 0: minimum 8 x 8, current 1360 x 768, maximum 4096 x 4096
Unknown-0 connected 1360x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768       75.0 +   70.1     60.0  
   1600x1024      60.2  
   1440x900       59.9  
   1360x768       60.0*    59.8  
   1280x960       60.0  
   1152x864       70.0     60.0  
   832x624        74.6  
   800x600        75.0     72.2     60.3     56.2  
   800x512       120.3  
   720x450       119.8  
   680x384       119.9    119.6  
   640x480       120.0     75.0     72.8     59.9  
   576x432       140.0    120.1  
   512x384       150.1    140.1    120.0  
   416x312       149.3  
   400x300       150.2    144.4    120.6    112.7  
   320x240       150.0    145.6    120.1  
Unknown-1 disconnected (normal left inverted right x axis y axis)
Unknown-2 disconnected (normal left inverted right x axis y axis)
Unknown-3 disconnected (normal left inverted right x axis y axis)
Unknown-4 disconnected (normal left inverted right x axis y axis)
  1366x768 (0x278)   60.0MHz
        h: width  1366 start 1436 end 1579 total 1792 skew    0 clock   33.5KHz
        v: height  768 start  771 end  774 total  798           clock   42.0Hz

Ostatnio edytowany przez Shiny (2013-01-07 14:20:30)

ArnVaker · 2013-01-07 14:25:37

[quote=Shiny]No cóż, przy Twoich wartościach[/quote]
To nie są moje wartości, tylko te co podałeś w pierwszym poście. ;)

Wygeneruj modeline:

Kod:

gtf 1366 768 60

I wstaw go w ten xorg.conf:

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
        HorizSync        30.0 - 63.0
        VertRefresh      50.0 - 76.0
# zamiast tej linijki wstaw modeline z powyższego polecenia
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Option          "UseEDID" "false"
        Option          "ModeValidation" "AllowNonEdidModes"
        Option          "metamodes" "1366x768_60"
EndSection

Ten modeline co podawałeś wcześniej jest jakiś dziwny, odświeżania tam nie ma nawet.

Shiny · 2013-01-07 14:44:33

Jest problem, bo gdy generuję modeline poleceniem gtf, to terminal mi wypluwa takie oto [b]ufo[/b] (korzystam z konsoli roota):

Kod:

root@user31-231:/home/shiny# gtf 1366 768 60

  # 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
  Modeline "1368x768_60.00"  85.86  1368 1440 1584 1800  768 769 772 795  -HSync +Vsync

Jak widać, znów robi się... [b]1368[/b] zamiast [b]1366[/b], no ale nawet pomijając ten fakt, to dodanie tego modeline do xorga powoduje też dodanie tej rozdzielczości w ustawieniach nVidii.
Xorga dołączam, bo a nóż (a nawet nuż) widelec znów coś schrzaniłem:

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
        HorizSync        30.0 - 63.0
        VertRefresh      50.0 - 76.0
    Modeline     "1368x768_60.00"  85.86  1368 1440 1584 1800  768 769 772 795  -HSync +Vsync
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Option          "UseEDID" "false"
        Option          "ModeValidation" "AllowNonEdidModes"
        Option          "metamodes" "1366x768_60"
EndSection

logi z uruchomienia też dołączę:

Kod:

[    28.044] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    28.044] X Protocol Version 11, Revision 0
[    28.044] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    28.044] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    28.044] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[    28.044] Build Date: 29 November 2012  08:52:43PM
[    28.044] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    28.044] Current version of pixman: 0.26.0
[    28.044]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    28.045] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.045] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  7 14:39:42 2013
[    28.071] (==) Using config file: "/etc/X11/xorg.conf"
[    28.071] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.107] (==) No Layout section.  Using the first Screen section.
[    28.107] (**) |-->Screen "Default Screen" (0)
[    28.107] (**) |   |-->Monitor "Configured Monitor"
[    28.118] (==) No device specified for screen "Default Screen".
    Using the first device section listed.
[    28.118] (**) |   |-->Device "Configured Video Device"
[    28.118] (==) Automatically adding devices
[    28.118] (==) Automatically enabling devices
[    28.152] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.152]     Entry deleted from font path.
[    28.182] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    28.182]     Entry deleted from font path.
[    28.182] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    28.182] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.182] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.182] (II) Loader magic: 0xb77685a0
[    28.182] (II) Module ABI versions:
[    28.182]     X.Org ANSI C Emulation: 0.4
[    28.182]     X.Org Video Driver: 12.1
[    28.182]     X.Org XInput driver : 16.0
[    28.182]     X.Org Server Extension : 6.0
[    28.183] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    28.183] (II) Open ACPI successful (/var/run/acpid.socket)
[    28.183] (II) LoadModule: "extmod"
[    28.304] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.319] (II) Module extmod: vendor="X.Org Foundation"
[    28.319]     compiled for 1.12.4, module version = 1.0.0
[    28.319]     Module class: X.Org Server Extension
[    28.319]     ABI class: X.Org Server Extension, version 6.0
[    28.319] (II) Loading extension SELinux
[    28.320] (II) Loading extension MIT-SCREEN-SAVER
[    28.320] (II) Loading extension XFree86-VidModeExtension
[    28.320] (II) Loading extension XFree86-DGA
[    28.320] (II) Loading extension DPMS
[    28.320] (II) Loading extension XVideo
[    28.320] (II) Loading extension XVideo-MotionCompensation
[    28.320] (II) Loading extension X-Resource
[    28.320] (II) LoadModule: "dbe"
[    28.320] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.336] (II) Module dbe: vendor="X.Org Foundation"
[    28.336]     compiled for 1.12.4, module version = 1.0.0
[    28.336]     Module class: X.Org Server Extension
[    28.336]     ABI class: X.Org Server Extension, version 6.0
[    28.336] (II) Loading extension DOUBLE-BUFFER
[    28.336] (II) LoadModule: "glx"
[    28.336] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    30.321] (II) Module glx: vendor="NVIDIA Corporation"
[    30.321]     compiled for 4.0.2, module version = 1.0.0
[    30.321]     Module class: X.Org Server Extension
[    30.321] (II) NVIDIA GLX Module  304.64  Tue Oct 30 11:31:18 PDT 2012
[    30.321] (II) Loading extension GLX
[    30.321] (II) LoadModule: "record"
[    30.322] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    30.362] (II) Module record: vendor="X.Org Foundation"
[    30.362]     compiled for 1.12.4, module version = 1.13.0
[    30.362]     Module class: X.Org Server Extension
[    30.362]     ABI class: X.Org Server Extension, version 6.0
[    30.362] (II) Loading extension RECORD
[    30.362] (II) LoadModule: "dri"
[    30.362] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    30.392] (II) Module dri: vendor="X.Org Foundation"
[    30.392]     compiled for 1.12.4, module version = 1.0.0
[    30.392]     ABI class: X.Org Server Extension, version 6.0
[    30.392] (II) Loading extension XFree86-DRI
[    30.392] (II) LoadModule: "dri2"
[    30.392] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.400] (II) Module dri2: vendor="X.Org Foundation"
[    30.400]     compiled for 1.12.4, module version = 1.2.0
[    30.400]     ABI class: X.Org Server Extension, version 6.0
[    30.400] (II) Loading extension DRI2
[    30.400] (II) LoadModule: "nvidia"
[    30.400] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    30.655] (II) Module nvidia: vendor="NVIDIA Corporation"
[    30.655]     compiled for 4.0.2, module version = 1.0.0
[    30.655]     Module class: X.Org Video Driver
[    30.698] (II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 11:11:05 PDT 2012
[    30.698] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    30.704] (++) using VT number 7

[    30.754] (II) Loading sub module "fb"
[    30.754] (II) LoadModule: "fb"
[    30.755] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.774] (II) Module fb: vendor="X.Org Foundation"
[    30.774]     compiled for 1.12.4, module version = 1.0.0
[    30.774]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.774] (II) Loading sub module "wfb"
[    30.774] (II) LoadModule: "wfb"
[    30.775] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    30.789] (II) Module wfb: vendor="X.Org Foundation"
[    30.789]     compiled for 1.12.4, module version = 1.0.0
[    30.789]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.790] (II) Loading sub module "ramdac"
[    30.790] (II) LoadModule: "ramdac"
[    30.790] (II) Module "ramdac" already built-in
[    30.802] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
[    30.802] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    30.802] (==) NVIDIA(0): RGB weight 888
[    30.802] (==) NVIDIA(0): Default visual is TrueColor
[    30.803] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.803] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[    30.803] (**) NVIDIA(0): Option "UseEDID" "false"
[    30.803] (**) NVIDIA(0): Option "MetaModes" "1366x768_60"
[    30.803] (**) NVIDIA(0): Enabling 2D acceleration
[    30.803] (**) NVIDIA(0): Ignoring EDIDs
[    32.232] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    32.235] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[    32.235] (--) NVIDIA(0): Memory: 131072 kBytes
[    32.235] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[    32.235] (II) NVIDIA(0): Detected AGP rate: 8X
[    32.235] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    32.235] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[    32.235] (--) NVIDIA(0):     CRT-0 (connected)
[    32.235] (--) NVIDIA(0):     CRT-1
[    32.235] (--) NVIDIA(0):     TV-0
[    32.235] (--) NVIDIA(0):     DFP-0
[    32.235] (--) NVIDIA(0):     DFP-1
[    32.235] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    32.235] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    32.235] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    32.235] (--) NVIDIA(0): TV encoder: (null)
[    32.235] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[    32.235] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    32.235] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[    32.235] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    32.236] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.236] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    32.236] (**) NVIDIA(0):     all display devices.)
[    32.236] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    32.236] (II) NVIDIA(0):     AllowNonEdidModes
[    32.241] (WW) NVIDIA(0): No valid modes for "1366x768_60"; removing.
[    32.241] (WW) NVIDIA(0): 
[    32.241] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[    32.241] (WW) NVIDIA(0):     "nvidia-auto-select".
[    32.241] (WW) NVIDIA(0): 
[    32.241] (II) NVIDIA(0): Validated MetaModes:
[    32.241] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    32.241] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    32.247] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[    32.248] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[    32.248] (WW) NVIDIA(0):     from CRT-0's EDID.
[    32.248] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    32.248] (--) Depth 24 pixmap format is 32 bpp
[    32.257] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    32.362] (II) Loading extension NV-GLX
[    32.436] (==) NVIDIA(0): Disabling shared memory pixmaps
[    32.436] (==) NVIDIA(0): Backing store disabled
[    32.436] (==) NVIDIA(0): Silken mouse enabled
[    32.436] (==) NVIDIA(0): DPMS enabled
[    32.437] (II) Loading extension NV-CONTROL
[    32.437] (II) Loading extension XINERAMA
[    32.437] (II) Loading sub module "dri2"
[    32.437] (II) LoadModule: "dri2"
[    32.438] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    32.438] (II) Module dri2: vendor="X.Org Foundation"
[    32.438]     compiled for 1.12.4, module version = 1.2.0
[    32.438]     ABI class: X.Org Server Extension, version 6.0
[    32.438] (II) NVIDIA(0): [DRI2] Setup complete
[    32.438] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    32.438] (--) RandR disabled
[    32.438] (II) Initializing built-in extension Generic Event Extension
[    32.438] (II) Initializing built-in extension SHAPE
[    32.438] (II) Initializing built-in extension MIT-SHM
[    32.438] (II) Initializing built-in extension XInputExtension
[    32.438] (II) Initializing built-in extension XTEST
[    32.438] (II) Initializing built-in extension BIG-REQUESTS
[    32.438] (II) Initializing built-in extension SYNC
[    32.438] (II) Initializing built-in extension XKEYBOARD
[    32.438] (II) Initializing built-in extension XC-MISC
[    32.438] (II) Initializing built-in extension SECURITY
[    32.438] (II) Initializing built-in extension XINERAMA
[    32.438] (II) Initializing built-in extension XFIXES
[    32.438] (II) Initializing built-in extension RENDER
[    32.438] (II) Initializing built-in extension RANDR
[    32.438] (II) Initializing built-in extension COMPOSITE
[    32.438] (II) Initializing built-in extension DAMAGE
[    32.438] (II) SELinux: Disabled on system
[    32.443] (II) Initializing extension GLX
[    32.783] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    32.783] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.783] (II) LoadModule: "evdev"
[    32.784] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.797] (II) Module evdev: vendor="X.Org Foundation"
[    32.797]     compiled for 1.12.1, module version = 2.7.0
[    32.797]     Module class: X.Org XInput Driver
[    32.797]     ABI class: X.Org XInput driver, version 16.0
[    32.797] (II) Using input driver 'evdev' for 'Power Button'
[    32.797] (**) Power Button: always reports core events
[    32.797] (**) evdev: Power Button: Device: "/dev/input/event5"
[    32.797] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.797] (--) evdev: Power Button: Found keys
[    32.797] (II) evdev: Power Button: Configuring as keyboard
[    32.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    32.797] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.797] (**) Option "xkb_rules" "evdev"
[    32.797] (**) Option "xkb_model" "pc105"
[    32.798] (**) Option "xkb_layout" "pl"
[    32.847] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.847] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.847] (II) Using input driver 'evdev' for 'Power Button'
[    32.847] (**) Power Button: always reports core events
[    32.847] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.847] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.847] (--) evdev: Power Button: Found keys
[    32.847] (II) evdev: Power Button: Configuring as keyboard
[    32.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    32.847] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    32.847] (**) Option "xkb_rules" "evdev"
[    32.847] (**) Option "xkb_model" "pc105"
[    32.847] (**) Option "xkb_layout" "pl"
[    32.848] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    32.848] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.849] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.849] (**) Sleep Button: always reports core events
[    32.849] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    32.849] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.849] (--) evdev: Sleep Button: Found keys
[    32.849] (II) evdev: Sleep Button: Configuring as keyboard
[    32.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    32.849] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    32.849] (**) Option "xkb_rules" "evdev"
[    32.849] (**) Option "xkb_model" "pc105"
[    32.849] (**) Option "xkb_layout" "pl"
[    32.850] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[    32.850] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.850] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.850] (**) USB USB Keykoard: always reports core events
[    32.850] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[    32.850] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.850] (--) evdev: USB USB Keykoard: Found keys
[    32.850] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.850] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    32.850] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[    32.850] (**) Option "xkb_rules" "evdev"
[    32.850] (**) Option "xkb_model" "pc105"
[    32.850] (**) Option "xkb_layout" "pl"
[    32.851] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[    32.851] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.851] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.852] (**) USB USB Keykoard: always reports core events
[    32.852] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[    32.852] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.852] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[    32.852] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[    32.852] (--) evdev: USB USB Keykoard: Found relative axes
[    32.852] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[    32.852] (--) evdev: USB USB Keykoard: Found absolute axes
[    32.852] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[    32.852] (--) evdev: USB USB Keykoard: Found keys
[    32.852] (II) evdev: USB USB Keykoard: Configuring as mouse
[    32.852] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.852] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[    32.852] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[    32.852] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[    32.852] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    32.852] (**) Option "xkb_rules" "evdev"
[    32.852] (**) Option "xkb_model" "pc105"
[    32.852] (**) Option "xkb_layout" "pl"
[    32.853] (II) evdev: USB USB Keykoard: initialized for relative axes.
[    32.853] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[    32.853] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[    32.853] (**) USB USB Keykoard: (accel) acceleration profile 0
[    32.853] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    32.853] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    32.854] (II) config/udev: Adding input device USB Mouse               (/dev/input/event2)
[    32.854] (**) USB Mouse              : Applying InputClass "evdev pointer catchall"
[    32.854] (II) Using input driver 'evdev' for 'USB Mouse              '
[    32.854] (**) USB Mouse              : always reports core events
[    32.854] (**) evdev: USB Mouse              : Device: "/dev/input/event2"
[    32.854] (--) evdev: USB Mouse              : Vendor 0x5e3 Product 0x1205
[    32.854] (--) evdev: USB Mouse              : Found 9 mouse buttons
[    32.854] (--) evdev: USB Mouse              : Found scroll wheel(s)
[    32.854] (--) evdev: USB Mouse              : Found relative axes
[    32.854] (--) evdev: USB Mouse              : Found x and y relative axes
[    32.854] (II) evdev: USB Mouse              : Configuring as mouse
[    32.854] (II) evdev: USB Mouse              : Adding scrollwheel support
[    32.854] (**) evdev: USB Mouse              : YAxisMapping: buttons 4 and 5
[    32.854] (**) evdev: USB Mouse              : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.854] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[    32.854] (II) XINPUT: Adding extended input device "USB Mouse              " (type: MOUSE, id 11)
[    32.854] (II) evdev: USB Mouse              : initialized for relative axes.
[    32.854] (**) USB Mouse              : (accel) keeping acceleration scheme 1
[    32.855] (**) USB Mouse              : (accel) acceleration profile 0
[    32.855] (**) USB Mouse              : (accel) acceleration factor: 2.000
[    32.855] (**) USB Mouse              : (accel) acceleration threshold: 4
[    32.855] (II) config/udev: Adding input device USB Mouse               (/dev/input/mouse0)
[    32.855] (II) No input driver specified, ignoring this device.
[    32.855] (II) This device may have been added with another device file.
[    32.856] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    32.856] (II) No input driver specified, ignoring this device.
[    32.856] (II) This device may have been added with another device file.
[    33.004] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    33.004] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    33.004] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    33.004] (**) NVIDIA(0):     all display devices.)
[    33.004] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    33.004] (II) NVIDIA(0):     AllowNonEdidModes
[    36.032] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    36.032] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    36.032] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    36.032] (**) NVIDIA(0):     all display devices.)
[    36.032] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    36.032] (II) NVIDIA(0):     AllowNonEdidModes
[    51.686] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    51.686] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    51.686] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    51.686] (**) NVIDIA(0):     all display devices.)
[    51.686] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    51.686] (II) NVIDIA(0):     AllowNonEdidModes
[    54.201] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    54.201] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    54.201] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    54.201] (**) NVIDIA(0):     all display devices.)
[    54.201] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    54.201] (II) NVIDIA(0):     AllowNonEdidModes
[    56.106] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    56.106] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    56.106] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    56.106] (**) NVIDIA(0):     all display devices.)
[    56.107] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    56.107] (II) NVIDIA(0):     AllowNonEdidModes
[   130.676] (II) NVIDIA(0): Setting mode "Unknown-0:1368x768_60.00"
[   133.586] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[   133.586] (WW) NVIDIA(0):     viewport height 768; adjusting

Ostatnio edytowany przez Shiny (2013-01-07 14:51:57)

ArnVaker · 2013-01-07 14:56:43

Widać w sieci, że z tym modeline faktycznie jest jakiś problem, o tutaj na przykład: http://ubuntuforums.org/showthread.php?t=1480033

Spróbuj taki jak tam gość sobie obliczył:

Kod:

    ModeLine       "1366x768" 84.75 1366 1440 1584 1776 768 769 772 800 -hsync +vsync

Tylko on też w sumie dziwny jest. ;)

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
        HorizSync        30.0 - 63.0
        VertRefresh      50.0 - 76.0
        ModeLine        "1366x768" 84.75 1366 1440 1584 1776 768 769 772 800 -hsync +vsync
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Option          "UseEDID" "false"
        Option          "ModeValidation" "AllowNonEdidModes"
        Option          "metamodes" "1366x768_60"
EndSection

Shiny · 2013-01-07 15:02:56

Zrobiłem tak i... teraz nie mam rozdzielczości 1368x768, ani też natywnej.

Ostatnio edytowany przez Shiny (2013-01-07 15:03:30)

ArnVaker · 2013-01-07 15:06:40

Jeszcze tak zobacz:

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
        HorizSync        30.0 - 63.0
        VertRefresh      50.0 - 76.0
        ModeLine        "1366x768" 84.75 1366 1440 1584 1776 768 769 772 800 -hsync +vsync
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Option          "UseEDID" "false"
        Option          "ModeValidation" "AllowNonEdidModes"
        Option          "metamodes" "1366x768"
EndSection

Jak nie to wrzuć Xorg.0.log i sprawdzaj te opcje co tamtemu użytkownikowi w końcu pomogły.

PS Czułki opadają.

Shiny · 2013-01-07 15:17:40

Mi już nerwy wysiadają powoli przez ten monitor, tak szczerze mówiąc. Ale cóż, zwyczajowo (to chyba taka tradycja będzie z mojej strony) umieszczę logi, bo oczywiście ten xorg nie zadziałał.

Kod:

[    27.596] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    27.596] X Protocol Version 11, Revision 0
[    27.596] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    27.596] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    27.596] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[    27.596] Build Date: 29 November 2012  08:52:43PM
[    27.596] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    27.596] Current version of pixman: 0.26.0
[    27.596]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    27.596] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.596] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  7 15:13:54 2013
[    27.616] (==) Using config file: "/etc/X11/xorg.conf"
[    27.616] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.649] (==) No Layout section.  Using the first Screen section.
[    27.649] (**) |-->Screen "Default Screen" (0)
[    27.649] (**) |   |-->Monitor "Configured Monitor"
[    27.663] (==) No device specified for screen "Default Screen".
    Using the first device section listed.
[    27.663] (**) |   |-->Device "Configured Video Device"
[    27.663] (==) Automatically adding devices
[    27.663] (==) Automatically enabling devices
[    27.805] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    27.805]     Entry deleted from font path.
[    27.918] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    27.918]     Entry deleted from font path.
[    27.918] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    27.918] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.918] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.918] (II) Loader magic: 0xb77515a0
[    27.919] (II) Module ABI versions:
[    27.919]     X.Org ANSI C Emulation: 0.4
[    27.919]     X.Org Video Driver: 12.1
[    27.919]     X.Org XInput driver : 16.0
[    27.919]     X.Org Server Extension : 6.0
[    27.920] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    27.920] (II) Open ACPI successful (/var/run/acpid.socket)
[    27.920] (II) LoadModule: "extmod"
[    28.040] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.104] (II) Module extmod: vendor="X.Org Foundation"
[    28.104]     compiled for 1.12.4, module version = 1.0.0
[    28.104]     Module class: X.Org Server Extension
[    28.104]     ABI class: X.Org Server Extension, version 6.0
[    28.104] (II) Loading extension SELinux
[    28.104] (II) Loading extension MIT-SCREEN-SAVER
[    28.104] (II) Loading extension XFree86-VidModeExtension
[    28.104] (II) Loading extension XFree86-DGA
[    28.104] (II) Loading extension DPMS
[    28.104] (II) Loading extension XVideo
[    28.104] (II) Loading extension XVideo-MotionCompensation
[    28.104] (II) Loading extension X-Resource
[    28.104] (II) LoadModule: "dbe"
[    28.105] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.114] (II) Module dbe: vendor="X.Org Foundation"
[    28.114]     compiled for 1.12.4, module version = 1.0.0
[    28.114]     Module class: X.Org Server Extension
[    28.114]     ABI class: X.Org Server Extension, version 6.0
[    28.114] (II) Loading extension DOUBLE-BUFFER
[    28.114] (II) LoadModule: "glx"
[    28.114] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    30.057] (II) Module glx: vendor="NVIDIA Corporation"
[    30.058]     compiled for 4.0.2, module version = 1.0.0
[    30.058]     Module class: X.Org Server Extension
[    30.058] (II) NVIDIA GLX Module  304.64  Tue Oct 30 11:31:18 PDT 2012
[    30.058] (II) Loading extension GLX
[    30.058] (II) LoadModule: "record"
[    30.058] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    30.157] (II) Module record: vendor="X.Org Foundation"
[    30.157]     compiled for 1.12.4, module version = 1.13.0
[    30.157]     Module class: X.Org Server Extension
[    30.157]     ABI class: X.Org Server Extension, version 6.0
[    30.157] (II) Loading extension RECORD
[    30.157] (II) LoadModule: "dri"
[    30.157] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    30.249] (II) Module dri: vendor="X.Org Foundation"
[    30.249]     compiled for 1.12.4, module version = 1.0.0
[    30.249]     ABI class: X.Org Server Extension, version 6.0
[    30.249] (II) Loading extension XFree86-DRI
[    30.249] (II) LoadModule: "dri2"
[    30.249] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.256] (II) Module dri2: vendor="X.Org Foundation"
[    30.256]     compiled for 1.12.4, module version = 1.2.0
[    30.256]     ABI class: X.Org Server Extension, version 6.0
[    30.256] (II) Loading extension DRI2
[    30.256] (II) LoadModule: "nvidia"
[    30.257] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    30.413] (II) Module nvidia: vendor="NVIDIA Corporation"
[    30.413]     compiled for 4.0.2, module version = 1.0.0
[    30.413]     Module class: X.Org Video Driver
[    30.500] (II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 11:11:05 PDT 2012
[    30.500] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    30.524] (++) using VT number 7

[    30.566] (II) Loading sub module "fb"
[    30.566] (II) LoadModule: "fb"
[    30.566] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.585] (II) Module fb: vendor="X.Org Foundation"
[    30.585]     compiled for 1.12.4, module version = 1.0.0
[    30.585]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.586] (II) Loading sub module "wfb"
[    30.586] (II) LoadModule: "wfb"
[    30.586] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    30.592] (II) Module wfb: vendor="X.Org Foundation"
[    30.592]     compiled for 1.12.4, module version = 1.0.0
[    30.592]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.593] (II) Loading sub module "ramdac"
[    30.593] (II) LoadModule: "ramdac"
[    30.593] (II) Module "ramdac" already built-in
[    30.614] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
[    30.614] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    30.614] (==) NVIDIA(0): RGB weight 888
[    30.614] (==) NVIDIA(0): Default visual is TrueColor
[    30.614] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.614] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[    30.614] (**) NVIDIA(0): Option "UseEDID" "false"
[    30.615] (**) NVIDIA(0): Option "MetaModes" "1366x768"
[    30.615] (**) NVIDIA(0): Enabling 2D acceleration
[    30.615] (**) NVIDIA(0): Ignoring EDIDs
[    32.046] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    32.049] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[    32.049] (--) NVIDIA(0): Memory: 131072 kBytes
[    32.049] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[    32.049] (II) NVIDIA(0): Detected AGP rate: 8X
[    32.049] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    32.049] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[    32.049] (--) NVIDIA(0):     CRT-0 (connected)
[    32.049] (--) NVIDIA(0):     CRT-1
[    32.049] (--) NVIDIA(0):     TV-0
[    32.049] (--) NVIDIA(0):     DFP-0
[    32.049] (--) NVIDIA(0):     DFP-1
[    32.049] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    32.049] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    32.050] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    32.050] (--) NVIDIA(0): TV encoder: (null)
[    32.050] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[    32.050] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    32.050] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[    32.050] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    32.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.050] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    32.050] (**) NVIDIA(0):     all display devices.)
[    32.050] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    32.050] (II) NVIDIA(0):     AllowNonEdidModes
[    32.051] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[    32.051] (WW) NVIDIA(0): 
[    32.051] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[    32.051] (WW) NVIDIA(0):     "nvidia-auto-select".
[    32.051] (WW) NVIDIA(0): 
[    32.051] (II) NVIDIA(0): Validated MetaModes:
[    32.051] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    32.051] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    32.057] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[    32.057] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[    32.057] (WW) NVIDIA(0):     from CRT-0's EDID.
[    32.057] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    32.057] (--) Depth 24 pixmap format is 32 bpp
[    32.067] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    32.182] (II) Loading extension NV-GLX
[    32.239] (==) NVIDIA(0): Disabling shared memory pixmaps
[    32.239] (==) NVIDIA(0): Backing store disabled
[    32.239] (==) NVIDIA(0): Silken mouse enabled
[    32.240] (==) NVIDIA(0): DPMS enabled
[    32.240] (II) Loading extension NV-CONTROL
[    32.240] (II) Loading extension XINERAMA
[    32.240] (II) Loading sub module "dri2"
[    32.240] (II) LoadModule: "dri2"
[    32.241] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    32.241] (II) Module dri2: vendor="X.Org Foundation"
[    32.241]     compiled for 1.12.4, module version = 1.2.0
[    32.241]     ABI class: X.Org Server Extension, version 6.0
[    32.241] (II) NVIDIA(0): [DRI2] Setup complete
[    32.241] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    32.241] (--) RandR disabled
[    32.241] (II) Initializing built-in extension Generic Event Extension
[    32.241] (II) Initializing built-in extension SHAPE
[    32.241] (II) Initializing built-in extension MIT-SHM
[    32.241] (II) Initializing built-in extension XInputExtension
[    32.241] (II) Initializing built-in extension XTEST
[    32.241] (II) Initializing built-in extension BIG-REQUESTS
[    32.241] (II) Initializing built-in extension SYNC
[    32.241] (II) Initializing built-in extension XKEYBOARD
[    32.241] (II) Initializing built-in extension XC-MISC
[    32.241] (II) Initializing built-in extension SECURITY
[    32.241] (II) Initializing built-in extension XINERAMA
[    32.242] (II) Initializing built-in extension XFIXES
[    32.242] (II) Initializing built-in extension RENDER
[    32.242] (II) Initializing built-in extension RANDR
[    32.242] (II) Initializing built-in extension COMPOSITE
[    32.242] (II) Initializing built-in extension DAMAGE
[    32.242] (II) SELinux: Disabled on system
[    32.246] (II) Initializing extension GLX
[    32.595] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    32.595] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.595] (II) LoadModule: "evdev"
[    32.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.609] (II) Module evdev: vendor="X.Org Foundation"
[    32.609]     compiled for 1.12.1, module version = 2.7.0
[    32.609]     Module class: X.Org XInput Driver
[    32.609]     ABI class: X.Org XInput driver, version 16.0
[    32.609] (II) Using input driver 'evdev' for 'Power Button'
[    32.609] (**) Power Button: always reports core events
[    32.609] (**) evdev: Power Button: Device: "/dev/input/event5"
[    32.609] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.609] (--) evdev: Power Button: Found keys
[    32.609] (II) evdev: Power Button: Configuring as keyboard
[    32.609] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    32.609] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.609] (**) Option "xkb_rules" "evdev"
[    32.609] (**) Option "xkb_model" "pc105"
[    32.609] (**) Option "xkb_layout" "pl"
[    32.659] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.659] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.659] (II) Using input driver 'evdev' for 'Power Button'
[    32.659] (**) Power Button: always reports core events
[    32.659] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.659] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.659] (--) evdev: Power Button: Found keys
[    32.659] (II) evdev: Power Button: Configuring as keyboard
[    32.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    32.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    32.659] (**) Option "xkb_rules" "evdev"
[    32.659] (**) Option "xkb_model" "pc105"
[    32.659] (**) Option "xkb_layout" "pl"
[    32.660] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    32.660] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.660] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.660] (**) Sleep Button: always reports core events
[    32.660] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    32.660] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.660] (--) evdev: Sleep Button: Found keys
[    32.660] (II) evdev: Sleep Button: Configuring as keyboard
[    32.660] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    32.660] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    32.660] (**) Option "xkb_rules" "evdev"
[    32.660] (**) Option "xkb_model" "pc105"
[    32.661] (**) Option "xkb_layout" "pl"
[    32.662] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[    32.662] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.662] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.662] (**) USB USB Keykoard: always reports core events
[    32.662] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[    32.662] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.662] (--) evdev: USB USB Keykoard: Found keys
[    32.662] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.662] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    32.662] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[    32.662] (**) Option "xkb_rules" "evdev"
[    32.662] (**) Option "xkb_model" "pc105"
[    32.662] (**) Option "xkb_layout" "pl"
[    32.663] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[    32.663] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    32.663] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[    32.663] (**) USB USB Keykoard: always reports core events
[    32.663] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[    32.663] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[    32.663] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[    32.663] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[    32.663] (--) evdev: USB USB Keykoard: Found relative axes
[    32.663] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[    32.663] (--) evdev: USB USB Keykoard: Found absolute axes
[    32.663] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[    32.663] (--) evdev: USB USB Keykoard: Found keys
[    32.664] (II) evdev: USB USB Keykoard: Configuring as mouse
[    32.664] (II) evdev: USB USB Keykoard: Configuring as keyboard
[    32.664] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[    32.664] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[    32.664] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[    32.664] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    32.664] (**) Option "xkb_rules" "evdev"
[    32.664] (**) Option "xkb_model" "pc105"
[    32.664] (**) Option "xkb_layout" "pl"
[    32.664] (II) evdev: USB USB Keykoard: initialized for relative axes.
[    32.664] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[    32.665] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[    32.665] (**) USB USB Keykoard: (accel) acceleration profile 0
[    32.665] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    32.665] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    32.665] (II) config/udev: Adding input device USB Mouse               (/dev/input/event2)
[    32.665] (**) USB Mouse              : Applying InputClass "evdev pointer catchall"
[    32.665] (II) Using input driver 'evdev' for 'USB Mouse              '
[    32.665] (**) USB Mouse              : always reports core events
[    32.665] (**) evdev: USB Mouse              : Device: "/dev/input/event2"
[    32.666] (--) evdev: USB Mouse              : Vendor 0x5e3 Product 0x1205
[    32.666] (--) evdev: USB Mouse              : Found 9 mouse buttons
[    32.666] (--) evdev: USB Mouse              : Found scroll wheel(s)
[    32.666] (--) evdev: USB Mouse              : Found relative axes
[    32.666] (--) evdev: USB Mouse              : Found x and y relative axes
[    32.666] (II) evdev: USB Mouse              : Configuring as mouse
[    32.666] (II) evdev: USB Mouse              : Adding scrollwheel support
[    32.666] (**) evdev: USB Mouse              : YAxisMapping: buttons 4 and 5
[    32.666] (**) evdev: USB Mouse              : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.666] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[    32.666] (II) XINPUT: Adding extended input device "USB Mouse              " (type: MOUSE, id 11)
[    32.666] (II) evdev: USB Mouse              : initialized for relative axes.
[    32.666] (**) USB Mouse              : (accel) keeping acceleration scheme 1
[    32.666] (**) USB Mouse              : (accel) acceleration profile 0
[    32.666] (**) USB Mouse              : (accel) acceleration factor: 2.000
[    32.666] (**) USB Mouse              : (accel) acceleration threshold: 4
[    32.667] (II) config/udev: Adding input device USB Mouse               (/dev/input/mouse0)
[    32.667] (II) No input driver specified, ignoring this device.
[    32.667] (II) This device may have been added with another device file.
[    32.667] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    32.667] (II) No input driver specified, ignoring this device.
[    32.667] (II) This device may have been added with another device file.
[    32.816] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    32.816] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.816] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    32.816] (**) NVIDIA(0):     all display devices.)
[    32.816] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    32.816] (II) NVIDIA(0):     AllowNonEdidModes
[    35.827] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    35.827] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    35.827] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    35.827] (**) NVIDIA(0):     all display devices.)
[    35.827] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    35.827] (II) NVIDIA(0):     AllowNonEdidModes
[    56.198] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    56.217] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    56.217] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    56.217] (**) NVIDIA(0):     all display devices.)
[    56.217] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    56.217] (II) NVIDIA(0):     AllowNonEdidModes
[    58.527] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    58.527] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    58.527] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    58.527] (**) NVIDIA(0):     all display devices.)
[    58.527] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    58.527] (II) NVIDIA(0):     AllowNonEdidModes
[    60.869] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[    60.869] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    60.869] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    60.869] (**) NVIDIA(0):     all display devices.)
[    60.869] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[    60.869] (II) NVIDIA(0):     AllowNonEdidModes
[    85.572] (II) NVIDIA(0): Setting mode "Unknown-0:1360x768"
[    87.798] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[    87.798] (WW) NVIDIA(0):     viewport height 768; adjusting

Time (s)	Query
0.00009	SET CHARSET latin2
0.00004	SET NAMES latin2
0.00061	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.143.218.115' WHERE u.id=1
0.00113	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.143.218.115', 1732866814)
0.00027	SELECT * FROM punbb_online WHERE logged<1732866514
0.00060	SELECT topic_id FROM punbb_posts WHERE id=219685
0.00239	SELECT id FROM punbb_posts WHERE topic_id=22634 ORDER BY posted
0.00061	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=22634 AND t.moved_to IS NULL
0.00005	SELECT search_for, replace_with FROM punbb_censoring
0.00697	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=22634 ORDER BY p.id LIMIT 25,25
0.00085	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=22634
Total query time: 0.01361 s

Forum Debian Users Gang

Ogłoszenie

#26 2013-01-05 17:45:16

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

#27 2013-01-05 17:56:13

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#28 2013-01-05 22:39:12

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#29 2013-01-05 22:50:56

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#30 2013-01-05 23:02:53

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#31 2013-01-05 23:47:34

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#32 2013-01-06 19:46:58

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

Kod:

#33 2013-01-06 20:09:31

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#34 2013-01-06 20:29:38

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

Kod:

Kod:

#35 2013-01-06 20:37:33

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#36 2013-01-07 11:08:55

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

Kod:

#37 2013-01-07 12:18:31

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#38 2013-01-07 13:23:04

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

Kod:

#39 2013-01-07 13:30:18

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

#40 2013-01-07 13:38:18

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

Kod:

#41 2013-01-07 13:52:19

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

#42 2013-01-07 14:04:05

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

#43 2013-01-07 14:08:20

sqrtek - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

#44 2013-01-07 14:18:44

Shiny - Użytkownik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod:

Kod:

#45 2013-01-07 14:25:37

ArnVaker - Kapelusznik

Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA

Kod: