Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2013-07-29 16:47:00
Elusaith - Użytkownik
- Elusaith
- Użytkownik
- Zarejestrowany: 2013-07-29
Problem z rozłączaniem sieci.
Witam.
Posiadam netbook Acer 756.
Zainstalowałem debiana stable amd64, wcześniej miałem na nim multum dystrybucji z którymi nie miałem tego problemu. Sęk w tym, że co jakiś czas (2-10 min.) rozłącza mi się sieć na minutkę lub dwie i łączy się z powrotem. Próbowałem przez wicd lub przez network-menager-gnome ale z takim samym skutkiem. Posiadam środowisko graficzne MATE.
lspci:
Kod:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 03:00.0 Network controller: Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10) 04:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)
lspci -k:
Kod:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Acer Incorporated [ALI] Device 0742
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Acer Incorporated [ALI] Device 0742
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Acer Incorporated [ALI] Device 0742
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Acer Incorporated [ALI] Device 0742
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Acer Incorporated [ALI] Device 0742
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Acer Incorporated [ALI] Device 0742
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller (rev 04)
Subsystem: Acer Incorporated [ALI] Device 0742
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Acer Incorporated [ALI] Device 0742
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Acer Incorporated [ALI] Device 0742
03:00.0 Network controller: Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01)
Subsystem: Lite-On Communications Inc Device 6621
Kernel driver in use: ath9k
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
Subsystem: Acer Incorporated [ALI] Device 0742
Kernel driver in use: tg3
04:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)
Subsystem: Acer Incorporated [ALI] Device 0742
Kernel driver in use: sdhci-pciOstatnio edytowany przez Elusaith (2013-07-29 16:47:14)
Offline
#2 2013-07-29 18:17:32
yossarian - 
Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozłączaniem sieci.
Witamy.
Przydałby się jeszcze wynik [tt]dmesg[/tt].
Offline
#3 2013-07-29 21:23:22
Elusaith - Użytkownik
- Elusaith
- Użytkownik
- Zarejestrowany: 2013-07-29
Re: Problem z rozłączaniem sieci.
Ufff... trochę to długie, tak długie, że nie mieści się w terminalu. :)
Proszę:
Kod:
[21761.655807] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21761.655814] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21761.655821] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21765.142550] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [21765.342110] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [21765.542066] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [21765.741857] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [21779.332892] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [21779.529534] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [21779.729354] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [21779.929248] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [21783.427496] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [21783.429432] wlan0: authenticated [21783.441989] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [21783.446288] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [21783.446296] wlan0: associated [21783.450215] cfg80211: Calling CRDA for country: PL [21783.457313] cfg80211: Regulatory domain changed to country: PL [21783.457322] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21783.457331] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [21783.457338] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [21783.457345] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [21783.457351] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [21786.451782] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [21786.459062] cfg80211: Calling CRDA to update world regulatory domain [21786.464478] cfg80211: World regulatory domain updated: [21786.464484] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21786.464490] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21786.464494] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21786.464499] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21786.464503] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21786.464507] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21789.827884] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [21789.830642] wlan0: authenticated [21789.967570] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [21790.166919] wlan0: associate with c8:64:c7:8e:4a:e7 (try 2) [21790.366910] wlan0: associate with c8:64:c7:8e:4a:e7 (try 3) [21790.566756] wlan0: association with c8:64:c7:8e:4a:e7 timed out [21794.074358] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [21794.076926] wlan0: authenticated [21794.077186] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [21794.081977] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [21794.081983] wlan0: associated [21794.087121] cfg80211: Calling CRDA for country: PL [21794.092656] cfg80211: Regulatory domain changed to country: PL [21794.092662] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21794.092667] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [21794.092671] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [21794.092675] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [21794.092679] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [21797.086957] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [21797.111159] cfg80211: Calling CRDA to update world regulatory domain [21797.118295] cfg80211: World regulatory domain updated: [21797.118301] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21797.118306] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21797.118311] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21797.118315] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21797.118319] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21797.118323] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21800.604095] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [21800.800541] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [21801.000338] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [21801.200220] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [22225.893235] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22225.895815] wlan0: authenticated [22226.031647] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [22226.228982] wlan0: associate with c8:64:c7:8e:4a:e7 (try 2) [22226.428881] wlan0: associate with c8:64:c7:8e:4a:e7 (try 3) [22226.628753] wlan0: association with c8:64:c7:8e:4a:e7 timed out [22240.165328] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22240.167967] wlan0: authenticated [22240.304574] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [22240.504229] wlan0: associate with c8:64:c7:8e:4a:e7 (try 2) [22240.704169] wlan0: associate with c8:64:c7:8e:4a:e7 (try 3) [22240.903925] wlan0: association with c8:64:c7:8e:4a:e7 timed out [22244.403120] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22244.405788] wlan0: authenticated [22244.418990] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [22244.423368] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [22244.423375] wlan0: associated [22244.427360] cfg80211: Calling CRDA for country: PL [22244.433836] cfg80211: Regulatory domain changed to country: PL [22244.433843] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [22244.433850] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22244.433856] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22244.433861] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22244.433866] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [22254.787446] wlan0: no IPv6 routers present [22548.815271] wlan0: deauthenticating from c8:64:c7:8e:4a:e7 by local choice (reason=14) [22548.827599] cfg80211: Calling CRDA to update world regulatory domain [22548.837641] cfg80211: World regulatory domain updated: [22548.837650] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [22548.837658] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22548.837666] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22548.837673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22548.837679] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22548.837686] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22552.197970] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22552.200897] wlan0: authenticated [22552.213566] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [22552.217853] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [22552.217861] wlan0: associated [22552.221681] cfg80211: Calling CRDA for country: PL [22552.230528] cfg80211: Regulatory domain changed to country: PL [22552.230537] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [22552.230545] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22552.230552] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22552.230558] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22552.230564] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [22555.225569] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [22555.235684] cfg80211: Calling CRDA to update world regulatory domain [22555.244842] cfg80211: World regulatory domain updated: [22555.244851] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [22555.244860] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22555.244868] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22555.244874] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22555.244881] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22555.244888] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22558.731728] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22558.929926] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [22559.129805] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [22559.329761] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [22572.913554] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22573.113304] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [22573.313146] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [22573.513058] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [22577.012111] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22577.013996] wlan0: authenticated [22577.150148] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [22577.346734] wlan0: associate with c8:64:c7:8e:4a:e7 (try 2) [22577.546559] wlan0: associate with c8:64:c7:8e:4a:e7 (try 3) [22577.746448] wlan0: association with c8:64:c7:8e:4a:e7 timed out [22581.373574] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22581.572111] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [22581.771990] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [22581.971868] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [22585.471219] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [22585.473193] wlan0: authenticated [22585.486342] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [22585.490635] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [22585.490644] wlan0: associated [22585.495306] cfg80211: Calling CRDA for country: PL [22585.502448] cfg80211: Regulatory domain changed to country: PL [22585.502455] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [22585.502461] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22585.502467] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22585.502472] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [22585.502477] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [22588.496947] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [22588.504824] cfg80211: Calling CRDA to update world regulatory domain [22588.513570] cfg80211: World regulatory domain updated: [22588.513579] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [22588.513588] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22588.513595] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22588.513602] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22588.513609] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22588.513615] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23013.532615] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23013.732479] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [23013.932399] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [23014.132176] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [23017.753866] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23017.949949] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [23018.149751] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [23018.349597] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [23021.972139] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23022.171378] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [23022.371173] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [23022.571048] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [23026.069562] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23026.071491] wlan0: authenticated [23026.084198] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [23026.088550] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [23026.088561] wlan0: associated [23026.093690] cfg80211: Calling CRDA for country: PL [23026.102069] cfg80211: Regulatory domain changed to country: PL [23026.102078] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23026.102086] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23026.102092] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23026.102099] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23026.102105] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [23036.686447] wlan0: no IPv6 routers present [23327.702210] wlan0: deauthenticating from c8:64:c7:8e:4a:e7 by local choice (reason=14) [23327.708731] cfg80211: Calling CRDA to update world regulatory domain [23327.718026] cfg80211: World regulatory domain updated: [23327.718035] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23327.718044] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23327.718051] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23327.718058] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23327.718065] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23327.718071] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23331.083482] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23331.085973] wlan0: authenticated [23331.099629] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [23331.103795] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [23331.103800] wlan0: associated [23331.108456] cfg80211: Calling CRDA for country: PL [23331.114582] cfg80211: Regulatory domain changed to country: PL [23331.114588] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23331.114593] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23331.114597] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23331.114601] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23331.114605] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [23334.111157] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [23334.118595] cfg80211: Calling CRDA to update world regulatory domain [23334.123854] cfg80211: World regulatory domain updated: [23334.123859] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23334.123865] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23334.123870] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23334.123874] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23334.123878] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23334.123882] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23337.486893] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23337.489510] wlan0: authenticated [23337.625714] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [23337.822732] wlan0: associate with c8:64:c7:8e:4a:e7 (try 2) [23338.022667] wlan0: associate with c8:64:c7:8e:4a:e7 (try 3) [23338.222446] wlan0: association with c8:64:c7:8e:4a:e7 timed out [23347.481632] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23347.484255] wlan0: authenticated [23347.484578] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [23347.488853] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [23347.488860] wlan0: associated [23347.492743] cfg80211: Calling CRDA for country: PL [23347.501769] cfg80211: Regulatory domain changed to country: PL [23347.501778] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23347.501786] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23347.501793] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23347.501799] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23347.501806] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [23350.491253] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [23350.502391] cfg80211: Calling CRDA to update world regulatory domain [23350.511305] cfg80211: World regulatory domain updated: [23350.511314] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23350.511323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23350.511331] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23350.511337] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23350.511344] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23350.511351] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23353.997748] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23354.196683] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [23354.396601] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [23354.596505] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [23358.101409] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23358.103276] wlan0: authenticated [23358.103527] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [23358.107678] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [23358.107683] wlan0: associated [23358.113500] cfg80211: Calling CRDA for country: PL [23358.119351] cfg80211: Regulatory domain changed to country: PL [23358.119356] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23358.119361] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23358.119365] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23358.119369] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23358.119373] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [23361.114676] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [23361.137131] cfg80211: Calling CRDA to update world regulatory domain [23361.142809] cfg80211: World regulatory domain updated: [23361.142815] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23361.142821] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23361.142825] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23361.142829] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23361.142834] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23361.142838] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23364.507301] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23364.509884] wlan0: authenticated [23364.522883] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [23364.530002] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [23364.530010] wlan0: associated [23364.533773] cfg80211: Calling CRDA for country: PL [23364.543345] cfg80211: Regulatory domain changed to country: PL [23364.543354] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23364.543363] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23364.543370] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23364.543377] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23364.543383] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [23367.531107] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [23367.539071] cfg80211: Calling CRDA to update world regulatory domain [23367.547633] cfg80211: World regulatory domain updated: [23367.547642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23367.547651] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23367.547658] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23367.547665] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23367.547671] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23367.547678] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23791.937840] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [23791.940500] wlan0: authenticated [23791.953309] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [23791.957512] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [23791.957519] wlan0: associated [23791.961505] cfg80211: Calling CRDA for country: PL [23791.966833] cfg80211: Regulatory domain changed to country: PL [23791.966839] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23791.966844] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23791.966848] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23791.966852] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [23791.966856] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [23802.003452] wlan0: no IPv6 routers present [24565.878150] wlan0: deauthenticating from c8:64:c7:8e:4a:e7 by local choice (reason=14) [24565.889114] cfg80211: Calling CRDA to update world regulatory domain [24565.898699] cfg80211: World regulatory domain updated: [24565.898707] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [24565.898717] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24565.898724] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24565.898732] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24565.898738] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24565.898745] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24569.384145] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [24569.583186] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [24569.783145] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [24569.982982] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [24583.574117] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [24583.770587] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 2) [24583.970442] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 3) [24584.170338] wlan0: authentication with c8:64:c7:8e:4a:e7 timed out [24587.667893] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [24587.669807] wlan0: authenticated [24587.807804] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [24588.003980] wlan0: associate with c8:64:c7:8e:4a:e7 (try 2) [24588.203859] wlan0: associate with c8:64:c7:8e:4a:e7 (try 3) [24588.403658] wlan0: association with c8:64:c7:8e:4a:e7 timed out [24601.872762] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [24601.875356] wlan0: authenticated [24601.888119] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [24601.892377] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [24601.892386] wlan0: associated [24601.897124] cfg80211: Calling CRDA for country: PL [24601.905183] cfg80211: Regulatory domain changed to country: PL [24601.905189] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [24601.905194] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [24601.905198] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [24601.905202] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [24601.905206] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [24605.027530] wlan0: deauthenticated from c8:64:c7:8e:4a:e7 (Reason: 2) [24605.037070] cfg80211: Calling CRDA to update world regulatory domain [24605.046183] cfg80211: World regulatory domain updated: [24605.046188] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [24605.046194] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24605.046198] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24605.046203] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24605.046207] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24605.046211] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25032.146362] wlan0: authenticate with c8:64:c7:8e:4a:e7 (try 1) [25032.148959] wlan0: authenticated [25032.161813] wlan0: associate with c8:64:c7:8e:4a:e7 (try 1) [25032.166170] wlan0: RX ReassocResp from c8:64:c7:8e:4a:e7 (capab=0x431 status=0 aid=2) [25032.166176] wlan0: associated [25032.170467] cfg80211: Calling CRDA for country: PL [25032.177305] cfg80211: Regulatory domain changed to country: PL [25032.177311] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [25032.177316] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25032.177320] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25032.177324] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25032.177328] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [25042.398668] wlan0: no IPv6 routers present
Offline
#4 2013-07-30 08:26:48
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozłączaniem sieci.
Spróbuj z nowszym kernelem i zobacz czy problem nadal występuje.
Offline
#5 2013-07-30 08:48:27
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Problem z rozłączaniem sieci.
Pokaż też wynik:
Kod:
dpkg -l | egrep -i 'network|wicd|wpa'
Jeśli np masz zainstalowane w systemie Network-manager i Wicd, to oba naraz są uruchomione w tle, oba próbują zarządzać interfejsem, i potem też mogą takie kfiatki wychodzić.
Pozdro
;-)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#6 2013-07-31 14:43:27
Elusaith - Użytkownik
- Elusaith
- Użytkownik
- Zarejestrowany: 2013-07-29
Re: Problem z rozłączaniem sieci.
Kernel mam chyba najnowszy... a przynajmniej apt-get nie wykrywa nowego. :)
Proszę:
Kod:
ii avahi-autoipd 0.6.31-2 amd64 Avahi IPv4LL network address configuration daemon ii glib-networking:amd64 2.32.3-1 amd64 network-related giomodules for GLib ii glib-networking-common 2.32.3-1 all network-related giomodules for GLib - data files ii glib-networking-services 2.32.3-1 amd64 network-related giomodules for GLib - D-Bus services ii icedtea-netx:amd64 1.4-3~deb7u1 amd64 NetX - implementation of the Java Network Launching Protocol (JNLP) ii icedtea-netx-common 1.4-3~deb7u1 all NetX - implementation of the Java Network Launching Protocol (JNLP) ii ifupdown 0.7.8 amd64 high level tools to configure network interfaces ii iproute 20120521-3+b3 amd64 networking and traffic control tools ii iputils-ping 3:20101006-1+b1 amd64 Tools to test the reachability of network hosts ii libaudio2:amd64 1.9.3-5 amd64 Network Audio System - shared libraries ii libmng1:amd64 1.0.10-3 amd64 Multiple-image Network Graphics library ii libnm-glib-vpn1 0.9.4.0-10 amd64 network management framework (GLib VPN shared library) ii libnm-glib4 0.9.4.0-10 amd64 network management framework (GLib shared library) ii libnm-util2 0.9.4.0-10 amd64 network management framework (shared library) ii libnss3:amd64 2:3.14.3-1 amd64 Network Security Service libraries ii libnss3-1d:amd64 2:3.14.3-1 amd64 Network Security Service libraries - transitional package ii libqt4-network:amd64 4:4.8.2+dfsg-11 amd64 Qt 4 network module ii libsdl-net1.2:amd64 1.2.8-2 amd64 Network library for Simple DirectMedia Layer 1.2, libraries ii libsnmp-base 5.4.3~dfsg-2.7 all SNMP (Simple Network Management Protocol) MIBs and documentation ii libsnmp15 5.4.3~dfsg-2.7 amd64 SNMP (Simple Network Management Protocol) library ii libsocket-perl 2.002-1 amd64 networking constants and support functions ii net-tools 1.60-24.2 amd64 The NET-3 networking toolkit ii netbase 5.0 all Basic TCP/IP networking system ii network-manager 0.9.4.0-10 amd64 network management framework (daemon and userspace tools) ii network-manager-gnome 0.9.4.1-5 amd64 network management framework (GNOME frontend) ii tor 0.2.3.25-1 amd64 anonymizing overlay network for TCP ii traceroute 1:2.0.18-3 amd64 Traces the route taken by packets over an IPv4/IPv6 network ii wpasupplicant 1.0-3+b2 amd64 client support for WPA and WPA2 (IEEE 802.11i)
Aktualnie mam zainstalowany tylko network-menager, ale problem występował też z zainstalowanym samym wicd.
Offline
#7 2013-07-31 14:57:58
Pavlo950 - człowiek pasjonat :D
#8 2013-07-31 17:42:49
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozłączaniem sieci.
Albo lepiej 3.10
W 3.9 dziwnie się sieć zachowywała.
Offline
#9 2013-07-31 19:10:50
Elusaith - Użytkownik
- Elusaith
- Użytkownik
- Zarejestrowany: 2013-07-29
Re: Problem z rozłączaniem sieci.
Kod:
Linux Elusaith-Netbook 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux
A jak to "wrzucić"? :)
Offline
#10 2013-07-31 20:51:54
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozłączaniem sieci.
Z aptosida powinno wejść 3.10 do stable. Próbuj.
Offline
#11 2013-08-01 12:18:55
Pavlo950 - człowiek pasjonat :D
Re: Problem z rozłączaniem sieci.
[url]http://dug.net.pl/tekst/136/lista_repozytoriow_(sources_list)_dla_debiana/#unstable[/url]
@yossarian
U mnie dobrze sieć działała na 3.9.
Ostatnio edytowany przez PavloAkaLogan (2013-08-01 12:21:54)
Offline
#12 2013-08-01 12:46:10
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozłączaniem sieci.
[quote=PavloAkaLogan][url]http://dug.net.pl/tekst/136/lista_repozytoriow_(sources_list)_dla_debiana/#unstable[/url]
@yossarian
U mnie dobrze sieć działała na 3.9.[/quote]
Akurat podane przez ciebie repozytorium może narobić więcej szkód w wersji stabilnej, niż pożytku.
Lepiej zainstalować z backportów lub z aptosida.
Problemy z 3.9 miałem nie tylko ja, ale sporo o tym było na różnych forach:
Kod:
… [ 3.930522] wlan0: authenticate with 24:db:ac:b0:65:a8 [ 3.943296] wlan0: send auth to 24:db:ac:b0:65:a8 (try 1/3) [ 3.958953] wlan0: authenticated [ 3.959219] wlan0: associate with 24:db:ac:b0:65:a8 (try 1/3) [ 3.964118] wlan0: RX AssocResp from 24:db:ac:b0:65:a8 (capab=0x431 status=0 aid=1) [ 3.964125] wlan0: HT AP is missing WMM params or HT capability/operation in AssocResp [ 4.406231] wlan0: authenticate with 24:db:ac:b0:65:a8 [ 4.415671] wlan0: send auth to 24:db:ac:b0:65:a8 (try 1/3) [ 4.519919] wlan0: send auth to 24:db:ac:b0:65:a8 (try 2/3) [ 4.521702] wlan0: authenticated [ 4.521920] wlan0: associate with 24:db:ac:b0:65:a8 (try 1/3) [ 4.524730] wlan0: RX AssocResp from 24:db:ac:b0:65:a8 (capab=0x431 status=0 aid=1) …
W ogóle nieparzyste wersje nadal dziwnie się zachowują.
Z 3.7 był problem z Alsą, w 3.5 chyba z zarządzaniem energii (jeżeli dobrze pamiętam).
Offline
#13 2013-08-02 16:09:00
Elusaith - Użytkownik
- Elusaith
- Użytkownik
- Zarejestrowany: 2013-07-29
Re: Problem z rozłączaniem sieci.
Spróbowałem jeszcze z wpa_gui, ale z tym nic nie działało. :)
Jak mogę zainstalować wcześniejszego kernela z backportów albo aptosida?
Offline
#14 2013-08-02 22:28:13
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozłączaniem sieci.
Z backportów możesz wg tego (akurat to opis dla Squeezze, ale zasada jest taka sama):
http://dug.net.pl/tekst/194/jadro_z_backportow_w_debianie_squeeze/
A tu z aptosida:
http://forum.dug.net.pl/viewtopic.php?pid=226635#p226635
Jak będziesz konfigurował sieć kilkoma narzędziami na raz to nigdy się nie połączysz.
Ostatnio edytowany przez yossarian (2013-08-02 22:29:29)
Offline
#15 2013-08-03 23:36:43
Elusaith - Użytkownik
- Elusaith
- Użytkownik
- Zarejestrowany: 2013-07-29
Re: Problem z rozłączaniem sieci.
Problem w jakiś dziwny sposób rozwiązał się sam. :D
Linux jest magiczny, dziękuje wszystkim za pomoc.
Offline
#16 2013-08-05 20:49:14
gindek - Zubr, bydle na etacie.
- gindek
- Zubr, bydle na etacie.
- Skąd: Z puszczy.
- Zarejestrowany: 2008-12-08
Re: Problem z rozłączaniem sieci.
[quote=Jacekalex]Pokaż też wynik:
Kod:
dpkg -l | egrep -i 'network|wicd|wpa'
Jeśli np masz zainstalowane w systemie Network-manager i Wicd, to oba naraz są uruchomione w tle, oba próbują zarządzać interfejsem, i potem też mogą takie kfiatki wychodzić.
Pozdro
;-)[/quote]
podpisuje sie pod tym.
" Wojny przychodzą i odchodzą, a moi żołnierze są wieczni"
"Zbuduj mały, dziarski router z udostępnionych przez prowadzącego części od Kamaza?"
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00015 | SET CHARSET latin2 |
| 0.00006 | SET NAMES latin2 |
| 0.00160 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.145.89.89' WHERE u.id=1 |
| 0.00104 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.145.89.89', 1732386398) |
| 0.00059 | SELECT * FROM punbb_online WHERE logged<1732386098 |
| 0.00092 | SELECT topic_id FROM punbb_posts WHERE id=237979 |
| 0.00303 | SELECT id FROM punbb_posts WHERE topic_id=24022 ORDER BY posted |
| 0.00109 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24022 AND t.moved_to IS NULL |
| 0.00005 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00170 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24022 ORDER BY p.id LIMIT 0,25 |
| 0.00092 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24022 |
| Total query time: 0.01115 s | |