Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2013-10-19 13:19:33
robin92 - Użytkownik
- robin92
- Użytkownik
- Zarejestrowany: 2013-10-19
X Error of failed request
Ponieważ to mój pierwszy post to witam wszystkich forumowiczów.
Dzisiaj zainstalowałem Debiana i od razu wrzuciłem mu [b]kernel-3.10.3-bpo-amd64[/b] oraz [b]flgrx-legacy-driver[/b] (oba z z [i]wheezy-backports[/i]). Niestety o ile kernel działa super, nie można powiedzieć tego o sterownikach do grafiki - za każdym razem gdy uruchamiam aplikację OpenGL wyskakuje taki oto komunikat
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 139 (ATIFGLEXTENSION)
Minor opcode of failed request: 66 ()
Serial number of failed request: 13
Current serial number in output stream: 13[/quote]
Powiem szczerze, że nie wiem co mogło pójść nie tak. Będę wdzięczny za pomoc :)
Offline
#2 2013-10-19 13:26:48
ArnVaker - 
Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
Jaką aplikację?
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#3 2013-10-19 13:37:17
robin92 - Użytkownik
- robin92
- Użytkownik
- Zarejestrowany: 2013-10-19
Re: X Error of failed request
glxinfo, glxgears
podejrzewam, że każdą.
Offline
#4 2013-10-19 14:01:10
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
OK, może po prostu obsługa kernela 3.10 nie została jeszcze dodana w tej wersji sterowników. Na 3.2 z głównego repo działają prawidłowo? W sumie możesz jeszcze wrzucić loga z X-ów oraz dla pewności pytanie: cały system jest 64-bitowy, czy tylko kernel?
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#5 2013-10-19 14:05:41
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: X Error of failed request
Możesz jeszcze przeinstalować fglrx-legacy-modules-dkms i pokazać czy się moduł poprawnie buduje.
Offline
#6 2013-10-19 14:14:45
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
Według [bug]717556[/bug] wersja 8.97.100.7-4 obsługuje kernel 3.10, w backportach jest wcześniejsza.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#7 2013-10-19 14:20:17
robin92 - Użytkownik
- robin92
- Użytkownik
- Zarejestrowany: 2013-10-19
Re: X Error of failed request
[quote=ArnVaker]Na 3.2 z głównego repo działają prawidłowo?[/quote]
Nie ma sensu sprawdzać, nie chcę kernela < 3.8 :)
[quote=ArnVaker]W sumie możesz jeszcze wrzucić loga z X-ów[/quote]
Kod:
[ 14.825]X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 14.825] X Protocol Version 11, Revision 0
[ 14.825] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 14.825] Current Operating System: Linux boxy 3.10-0.bpo.3-amd64 #1 SMP Debian 3.10.11-1~bpo70+1 (2013-09-24) x86_64
[ 14.825] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10-0.bpo.3-amd64 root=UUID=f514e6e4-6442-402e-a479-5610131acc2b ro quiet
[ 14.825] Build Date: 17 April 2013 10:22:47AM
[ 14.825] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[ 14.825] Current version of pixman: 0.26.0
[ 14.825] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.825] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.825] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 19 14:12:19 2013
[ 14.836] (==) Using config file: "/etc/X11/xorg.conf"
[ 14.836] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14.869] (==) ServerLayout "aticonfig Layout"
[ 14.869] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 14.869] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 14.870] (**) | |-->Device "aticonfig-Device[0]-0"
[ 14.870] (==) Automatically adding devices
[ 14.870] (==) Automatically enabling devices
[ 14.876] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 14.876] Entry deleted from font path.
[ 14.910] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 14.910] Entry deleted from font path.
[ 14.910] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 14.910] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.910] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.910] (II) Loader magic: 0x7f03ea084ae0
[ 14.910] (II) Module ABI versions:
[ 14.910] X.Org ANSI C Emulation: 0.4
[ 14.910] X.Org Video Driver: 12.1
[ 14.910] X.Org XInput driver : 16.0
[ 14.910] X.Org Server Extension : 6.0
[ 14.911] (--) PCI:*(0:1:0:0) 1002:9440:0000:0000 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x00008000/256, BIOS @ 0x????????/131072
[ 14.911] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14.911] (II) "extmod" will be loaded by default.
[ 14.911] (II) "dbe" will be loaded by default.
[ 14.911] (II) "glx" will be loaded by default.
[ 14.911] (II) "record" will be loaded by default.
[ 14.911] (II) "dri" will be loaded by default.
[ 14.911] (II) "dri2" will be loaded by default.
[ 14.911] (II) LoadModule: "extmod"
[ 14.920] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 14.925] (II) Module extmod: vendor="X.Org Foundation"
[ 14.925] compiled for 1.12.4, module version = 1.0.0
[ 14.925] Module class: X.Org Server Extension
[ 14.925] ABI class: X.Org Server Extension, version 6.0
[ 14.925] (II) Loading extension SELinux
[ 14.925] (II) Loading extension MIT-SCREEN-SAVER
[ 14.925] (II) Loading extension XFree86-VidModeExtension
[ 14.925] (II) Loading extension XFree86-DGA
[ 14.925] (II) Loading extension DPMS
[ 14.925] (II) Loading extension XVideo
[ 14.925] (II) Loading extension XVideo-MotionCompensation
[ 14.925] (II) Loading extension X-Resource
[ 14.925] (II) LoadModule: "dbe"
[ 14.925] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 14.937] (II) Module dbe: vendor="X.Org Foundation"
[ 14.937] compiled for 1.12.4, module version = 1.0.0
[ 14.937] Module class: X.Org Server Extension
[ 14.937] ABI class: X.Org Server Extension, version 6.0
[ 14.937] (II) Loading extension DOUBLE-BUFFER
[ 14.937] (II) LoadModule: "glx"
[ 14.937] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 14.960] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 14.960] compiled for 6.9.0, module version = 1.0.0
[ 14.960] (II) Loading extension GLX
[ 14.960] (II) LoadModule: "record"
[ 14.961] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 14.986] (II) Module record: vendor="X.Org Foundation"
[ 14.986] compiled for 1.12.4, module version = 1.13.0
[ 14.986] Module class: X.Org Server Extension
[ 14.986] ABI class: X.Org Server Extension, version 6.0
[ 14.986] (II) Loading extension RECORD
[ 14.986] (II) LoadModule: "dri"
[ 14.987] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.028] (II) Module dri: vendor="X.Org Foundation"
[ 15.028] compiled for 1.12.4, module version = 1.0.0
[ 15.028] ABI class: X.Org Server Extension, version 6.0
[ 15.028] (II) Loading extension XFree86-DRI
[ 15.028] (II) LoadModule: "dri2"
[ 15.028] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.029] (II) Module dri2: vendor="X.Org Foundation"
[ 15.029] compiled for 1.12.4, module version = 1.2.0
[ 15.029] ABI class: X.Org Server Extension, version 6.0
[ 15.029] (II) Loading extension DRI2
[ 15.029] (II) LoadModule: "fglrx"
[ 15.029] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 15.242] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 15.242] compiled for 1.4.99.906, module version = 8.97.2
[ 15.242] Module class: X.Org Video Driver
[ 15.244] (II) Loading sub module "fglrxdrm"
[ 15.244] (II) LoadModule: "fglrxdrm"
[ 15.244] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 15.256] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 15.256] compiled for 1.4.99.906, module version = 8.97.2
[ 15.256] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 15.256] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7
[ 15.256] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[ 15.256] (++) using VT number 7
[ 15.260] (WW) Falling back to old probe method for fglrx
[ 15.293] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 15.304] (--) Chipset Supported AMD Graphics Processor (0x9440) found
[ 15.305] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 15.305] (II) AMD Video driver is running on the exact device targeted for this release
[ 15.306] (II) AMD Video driver is signed
[ 15.306] (II) fglrx(0): pEnt->device->identifier=0x7f03eb97bc20
[ 15.306] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 15.306] (II) Loading sub module "vgahw"
[ 15.306] (II) LoadModule: "vgahw"
[ 15.306] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 15.317] (II) Module vgahw: vendor="X.Org Foundation"
[ 15.317] compiled for 1.12.4, module version = 0.1.0
[ 15.317] ABI class: X.Org Video Driver, version 12.1
[ 15.317] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 15.317] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 15.317] (==) fglrx(0): Default visual is TrueColor
[ 15.317] (**) fglrx(0): Option "DPMS" "true"
[ 15.317] (==) fglrx(0): RGB weight 888
[ 15.317] (II) fglrx(0): Using 8 bits per RGB
[ 15.317] (==) fglrx(0): Buffer Tiling is ON
[ 15.318] (II) Loading sub module "fglrxdrm"
[ 15.318] (II) LoadModule: "fglrxdrm"
[ 15.318] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 15.318] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 15.318] compiled for 1.4.99.906, module version = 8.97.2
[ 15.320] ukiDynamicMajor: failed to open /proc/ati/major
[ 15.320] ukiDynamicMajor: failed to open /proc/ati/major
[ 15.320] (**) fglrx(0): NoAccel = NO
[ 15.320] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 15.320] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9440)
[ 15.320] (--) fglrx(0): (PciSubVendor = 0x0000, PciSubDevice = 0x0000)
[ 15.320] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 15.320] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 15.320] (--) fglrx(0): MMIO registers at 0xf5000000
[ 15.320] (--) fglrx(0): I/O port at 0x00008000
[ 15.320] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 15.330] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 15.401] (II) Loading sub module "vbe"
[ 15.401] (II) LoadModule: "vbe"
[ 15.401] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 15.401] (II) Module vbe: vendor="X.Org Foundation"
[ 15.401] compiled for 1.12.4, module version = 1.1.0
[ 15.402] ABI class: X.Org Video Driver, version 12.1
[ 15.411] (II) fglrx(0): VESA BIOS detected
[ 15.412] (II) fglrx(0): VESA VBE Version 3.0
[ 15.412] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 15.412] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 15.412] (II) fglrx(0): VESA VBE OEM Software Rev: 11.10
[ 15.412] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 15.412] (II) fglrx(0): VESA VBE OEM Product: 4
[ 15.412] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 15.452] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 15.452] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[ 15.452] (II) fglrx(0): PCIE card detected
[ 15.453] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 15.453] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 15.453] (WW) fglrx(0): Hasn't establisted DRM connection
[ 15.453] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 15.453] (WW) fglrx(0): No DRM connection for driver fglrx.
[ 15.453] (II) fglrx(0): RandR 1.2 support is enabled!
[ 15.453] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 15.453] (==) fglrx(0): Center Mode is disabled
[ 15.453] (II) Loading sub module "fb"
[ 15.453] (II) LoadModule: "fb"
[ 15.453] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.460] (II) Module fb: vendor="X.Org Foundation"
[ 15.460] compiled for 1.12.4, module version = 1.0.0
[ 15.460] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.460] (II) Loading sub module "ddc"
[ 15.460] (II) LoadModule: "ddc"
[ 15.460] (II) Module "ddc" already built-in
[ 15.866] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 15.866] (II) fglrx(0): Output DFP2 has no monitor section
[ 15.866] (II) fglrx(0): Output DFP3 has no monitor section
[ 15.866] (II) fglrx(0): Output CRT1 has no monitor section
[ 15.866] (II) fglrx(0): Output CRT2 has no monitor section
[ 15.866] (II) Loading sub module "ddc"
[ 15.866] (II) LoadModule: "ddc"
[ 15.866] (II) Module "ddc" already built-in
[ 15.866] (II) fglrx(0): Connected Display0: DFP2
[ 15.866] (II) fglrx(0): Display0 EDID data ---------------------------
[ 15.866] (II) fglrx(0): Manufacturer: SAM Model: 44c Serial#: 1129132594
[ 15.866] (II) fglrx(0): Year: 2008 Week: 46
[ 15.866] (II) fglrx(0): EDID Version: 1.3
[ 15.867] (II) fglrx(0): Digital Display Input
[ 15.867] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 15.867] (II) fglrx(0): Gamma: 2.20
[ 15.867] (II) fglrx(0): DPMS capabilities: Off
[ 15.867] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 15.867] (II) fglrx(0): First detailed timing is preferred mode
[ 15.867] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 15.867] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 15.867] (II) fglrx(0): Supported established timings:
[ 15.867] (II) fglrx(0): 720x400@70Hz
[ 15.867] (II) fglrx(0): 640x480@60Hz
[ 15.867] (II) fglrx(0): 640x480@67Hz
[ 15.867] (II) fglrx(0): 640x480@72Hz
[ 15.867] (II) fglrx(0): 640x480@75Hz
[ 15.867] (II) fglrx(0): 800x600@56Hz
[ 15.867] (II) fglrx(0): 800x600@60Hz
[ 15.867] (II) fglrx(0): 800x600@72Hz
[ 15.867] (II) fglrx(0): 800x600@75Hz
[ 15.867] (II) fglrx(0): 832x624@75Hz
[ 15.867] (II) fglrx(0): 1024x768@60Hz
[ 15.867] (II) fglrx(0): 1024x768@70Hz
[ 15.867] (II) fglrx(0): 1024x768@75Hz
[ 15.867] (II) fglrx(0): 1280x1024@75Hz
[ 15.867] (II) fglrx(0): 1152x864@75Hz
[ 15.867] (II) fglrx(0): Manufacturer's mask: 0
[ 15.867] (II) fglrx(0): Supported standard timings:
[ 15.867] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 15.867] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 15.867] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 15.867] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 15.867] (II) fglrx(0): Supported detailed timing:
[ 15.867] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 15.867] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 15.867] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 15.867] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 155 MHz
[ 15.867] (II) fglrx(0): Monitor name: SyncMaster
[ 15.867] (II) fglrx(0): Serial No: H9XQB08984
[ 15.867] (II) fglrx(0): EDID (in hex):
[ 15.867] (II) fglrx(0): 00ffffffffffff004c2d4c0432324d43
[ 15.867] (II) fglrx(0): 2e120103802f1e782aee91a3544c9926
[ 15.867] (II) fglrx(0): 0f5054bfef80b30081808140714f0101
[ 15.867] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 15.867] (II) fglrx(0): 3600da281100001a000000fd00384b1e
[ 15.867] (II) fglrx(0): 510f000a202020202020000000fc0053
[ 15.867] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 15.867] (II) fglrx(0): 00483958514230383938340a202000b9
[ 15.867] (II) fglrx(0): End of Display0 EDID data --------------------
[ 15.958] (II) fglrx(0): EDID for output DFP1
[ 15.958] (II) fglrx(0): EDID for output DFP2
[ 15.958] (II) fglrx(0): Manufacturer: SAM Model: 44c Serial#: 1129132594
[ 15.958] (II) fglrx(0): Year: 2008 Week: 46
[ 15.958] (II) fglrx(0): EDID Version: 1.3
[ 15.958] (II) fglrx(0): Digital Display Input
[ 15.958] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 15.958] (II) fglrx(0): Gamma: 2.20
[ 15.958] (II) fglrx(0): DPMS capabilities: Off
[ 15.958] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 15.958] (II) fglrx(0): First detailed timing is preferred mode
[ 15.958] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 15.958] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 15.958] (II) fglrx(0): Supported established timings:
[ 15.958] (II) fglrx(0): 720x400@70Hz
[ 15.958] (II) fglrx(0): 640x480@60Hz
[ 15.958] (II) fglrx(0): 640x480@67Hz
[ 15.958] (II) fglrx(0): 640x480@72Hz
[ 15.958] (II) fglrx(0): 640x480@75Hz
[ 15.958] (II) fglrx(0): 800x600@56Hz
[ 15.958] (II) fglrx(0): 800x600@60Hz
[ 15.958] (II) fglrx(0): 800x600@72Hz
[ 15.958] (II) fglrx(0): 800x600@75Hz
[ 15.958] (II) fglrx(0): 832x624@75Hz
[ 15.958] (II) fglrx(0): 1024x768@60Hz
[ 15.958] (II) fglrx(0): 1024x768@70Hz
[ 15.958] (II) fglrx(0): 1024x768@75Hz
[ 15.958] (II) fglrx(0): 1280x1024@75Hz
[ 15.958] (II) fglrx(0): 1152x864@75Hz
[ 15.958] (II) fglrx(0): Manufacturer's mask: 0
[ 15.958] (II) fglrx(0): Supported standard timings:
[ 15.958] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 15.958] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 15.958] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 15.958] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 15.958] (II) fglrx(0): Supported detailed timing:
[ 15.958] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 15.958] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 15.958] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 15.958] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 155 MHz
[ 15.958] (II) fglrx(0): Monitor name: SyncMaster
[ 15.958] (II) fglrx(0): Serial No: H9XQB08984
[ 15.958] (II) fglrx(0): EDID (in hex):
[ 15.958] (II) fglrx(0): 00ffffffffffff004c2d4c0432324d43
[ 15.958] (II) fglrx(0): 2e120103802f1e782aee91a3544c9926
[ 15.958] (II) fglrx(0): 0f5054bfef80b30081808140714f0101
[ 15.958] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 15.958] (II) fglrx(0): 3600da281100001a000000fd00384b1e
[ 15.958] (II) fglrx(0): 510f000a202020202020000000fc0053
[ 15.958] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 15.958] (II) fglrx(0): 00483958514230383938340a202000b9
[ 15.959] (II) fglrx(0): Printing probed modes for output DFP2
[ 15.959] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz)
[ 15.959] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 15.959] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 -hsync -vsync (60.0 kHz)
[ 15.959] (II) fglrx(0): Modeline "1360x1024"x60.0 116.01 1360 1448 1592 1824 1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[ 15.959] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 15.959] (II) fglrx(0): Modeline "1152x648"x60.0 59.90 1152 1200 1320 1488 648 649 652 671 +hsync -vsync (40.3 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 15.959] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 15.959] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 15.959] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 15.959] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 15.959] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 15.959] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 15.959] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 15.959] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 15.959] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 15.959] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 15.959] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 15.959] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 15.959] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 15.959] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 15.959] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 15.959] (II) fglrx(0): EDID for output DFP3
[ 15.959] (II) fglrx(0): EDID for output CRT1
[ 15.959] (II) fglrx(0): EDID for output CRT2
[ 15.959] (II) fglrx(0): Output DFP1 disconnected
[ 15.959] (II) fglrx(0): Output DFP2 connected
[ 15.959] (II) fglrx(0): Output DFP3 disconnected
[ 15.959] (II) fglrx(0): Output CRT1 disconnected
[ 15.959] (II) fglrx(0): Output CRT2 disconnected
[ 15.959] (II) fglrx(0): Using exact sizes for initial modes
[ 15.959] (II) fglrx(0): Output DFP2 using initial mode 1680x1050
[ 15.959] (II) fglrx(0): DPI set to (96, 96)
[ 15.959] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected.
[ 15.959] (==) fglrx(0): PseudoColor visuals disabled
[ 15.960] (II) Loading sub module "ramdac"
[ 15.960] (II) LoadModule: "ramdac"
[ 15.960] (II) Module "ramdac" already built-in
[ 15.960] (==) fglrx(0): NoDRI = NO
[ 15.960] (==) fglrx(0): Capabilities: 0x00000000
[ 15.960] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 15.960] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 15.960] (==) fglrx(0): UseFastTLS=0
[ 15.960] (==) fglrx(0): BlockSignalsOnLock=1
[ 15.960] (--) Depth 24 pixmap format is 32 bpp
[ 15.960] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
[ 15.960] (WW) fglrx(0): ***********************************************************
[ 15.960] (WW) fglrx(0): * DRI initialization failed *
[ 15.960] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 15.960] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 15.960] (WW) fglrx(0): ***********************************************************
[ 15.969] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[ 15.973] (II) fglrx(0): FBMM initialized for area (0,0)-(1728,8191)
[ 15.973] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1680) (front color buffer - assumption)
[ 15.973] (II) fglrx(0): Largest offscreen area available: 1728 x 6511
[ 15.974] (==) fglrx(0): Backing store disabled
[ 15.974] (II) Loading extension FGLRXEXTENSION
[ 15.974] (**) fglrx(0): DPMS enabled
[ 15.974] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 15.974] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 15.974] (II) LoadModule: "glesx"
[ 15.975] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 16.072] (II) Module glesx: vendor="X.Org Foundation"
[ 16.072] compiled for 1.4.99.906, module version = 1.0.0
[ 16.072] (II) Loading extension GLESX
[ 16.072] (II) fglrx(0): GLESX enableFlags = 512
[ 16.074] (II) LoadModule: "amdxmm"
[ 16.074] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 16.124] (II) Module amdxmm: vendor="X.Org Foundation"
[ 16.124] compiled for 1.4.99.906, module version = 2.0.0
[ 16.124] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0):
[ 16.124] (EE) fglrx(0): XMM failed to initialize
[ 16.124] (WW) fglrx(0): No XV video playback available
[ 16.124] (II) fglrx(0): Enable composite support successfully
[ 16.124] (WW) fglrx(0): Option "VendorName" is not used
[ 16.124] (WW) fglrx(0): Option "ModelName" is not used
[ 16.124] (==) fglrx(0): Silken mouse enabled
[ 16.124] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 16.124] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 16.203] (--) RandR disabled
[ 16.203] (II) Initializing built-in extension Generic Event Extension
[ 16.203] (II) Initializing built-in extension SHAPE
[ 16.203] (II) Initializing built-in extension MIT-SHM
[ 16.203] (II) Initializing built-in extension XInputExtension
[ 16.203] (II) Initializing built-in extension XTEST
[ 16.204] (II) Initializing built-in extension BIG-REQUESTS
[ 16.204] (II) Initializing built-in extension SYNC
[ 16.204] (II) Initializing built-in extension XKEYBOARD
[ 16.204] (II) Initializing built-in extension XC-MISC
[ 16.204] (II) Initializing built-in extension SECURITY
[ 16.204] (II) Initializing built-in extension XINERAMA
[ 16.204] (II) Initializing built-in extension XFIXES
[ 16.204] (II) Initializing built-in extension RENDER
[ 16.204] (II) Initializing built-in extension RANDR
[ 16.204] (II) Initializing built-in extension COMPOSITE
[ 16.204] (II) Initializing built-in extension DAMAGE
[ 16.204] (II) SELinux: Disabled on system
[ 16.206] (II) AIGLX: Screen 0 is not DRI capable
[ 16.207] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 16.211] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 16.447] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 16.447] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.447] (II) LoadModule: "evdev"
[ 16.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.458] (II) Module evdev: vendor="X.Org Foundation"
[ 16.458] compiled for 1.12.1, module version = 2.7.0
[ 16.458] Module class: X.Org XInput Driver
[ 16.458] ABI class: X.Org XInput driver, version 16.0
[ 16.458] (II) Using input driver 'evdev' for 'Power Button'
[ 16.458] (**) Power Button: always reports core events
[ 16.458] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 16.458] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.458] (--) evdev: Power Button: Found keys
[ 16.458] (II) evdev: Power Button: Configuring as keyboard
[ 16.458] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 16.458] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.458] (**) Option "xkb_rules" "evdev"
[ 16.458] (**) Option "xkb_model" "pc105"
[ 16.458] (**) Option "xkb_layout" "pl"
[ 16.483] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.483] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.483] (II) Using input driver 'evdev' for 'Power Button'
[ 16.483] (**) Power Button: always reports core events
[ 16.483] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.483] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.483] (--) evdev: Power Button: Found keys
[ 16.483] (II) evdev: Power Button: Configuring as keyboard
[ 16.483] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 16.483] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.483] (**) Option "xkb_rules" "evdev"
[ 16.483] (**) Option "xkb_model" "pc105"
[ 16.483] (**) Option "xkb_layout" "pl"
[ 16.484] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[ 16.484] (II) No input driver specified, ignoring this device.
[ 16.484] (II) This device may have been added with another device file.
[ 16.484] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 16.484] (II) No input driver specified, ignoring this device.
[ 16.484] (II) This device may have been added with another device file.
[ 16.484] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event10)
[ 16.484] (II) No input driver specified, ignoring this device.
[ 16.484] (II) This device may have been added with another device file.
[ 16.485] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event11)
[ 16.485] (II) No input driver specified, ignoring this device.
[ 16.485] (II) This device may have been added with another device file.
[ 16.485] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event12)
[ 16.485] (II) No input driver specified, ignoring this device.
[ 16.485] (II) This device may have been added with another device file.
[ 16.485] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13)
[ 16.485] (II) No input driver specified, ignoring this device.
[ 16.485] (II) This device may have been added with another device file.
[ 16.486] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event6)
[ 16.486] (II) No input driver specified, ignoring this device.
[ 16.486] (II) This device may have been added with another device file.
[ 16.486] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event7)
[ 16.486] (II) No input driver specified, ignoring this device.
[ 16.486] (II) This device may have been added with another device file.
[ 16.486] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event8)
[ 16.486] (II) No input driver specified, ignoring this device.
[ 16.486] (II) This device may have been added with another device file.
[ 16.487] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event9)
[ 16.487] (II) No input driver specified, ignoring this device.
[ 16.487] (II) This device may have been added with another device file.
[ 16.487] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[ 16.487] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 16.487] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 16.487] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 16.487] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
[ 16.487] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
[ 16.487] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 16.487] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 16.487] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 16.487] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 16.487] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 16.487] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 16.487] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 16.487] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.487] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input0/event0"
[ 16.487] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 16.487] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 16.488] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 16.488] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 16.488] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 16.488] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 16.488] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 16.488] (II) No input driver specified, ignoring this device.
[ 16.488] (II) This device may have been added with another device file.
[ 16.488] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event1)
[ 16.488] (**) CHESEN USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.488] (II) Using input driver 'evdev' for 'CHESEN USB Keyboard'
[ 16.488] (**) CHESEN USB Keyboard: always reports core events
[ 16.488] (**) evdev: CHESEN USB Keyboard: Device: "/dev/input/event1"
[ 16.488] (--) evdev: CHESEN USB Keyboard: Vendor 0xa81 Product 0x101
[ 16.488] (--) evdev: CHESEN USB Keyboard: Found keys
[ 16.488] (II) evdev: CHESEN USB Keyboard: Configuring as keyboard
[ 16.488] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input1/event1"
[ 16.488] (II) XINPUT: Adding extended input device "CHESEN USB Keyboard" (type: KEYBOARD, id 9)
[ 16.489] (**) Option "xkb_rules" "evdev"
[ 16.489] (**) Option "xkb_model" "pc105"
[ 16.489] (**) Option "xkb_layout" "pl"
[ 16.489] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event2)
[ 16.489] (**) CHESEN USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.489] (II) Using input driver 'evdev' for 'CHESEN USB Keyboard'
[ 16.489] (**) CHESEN USB Keyboard: always reports core events
[ 16.489] (**) evdev: CHESEN USB Keyboard: Device: "/dev/input/event2"
[ 16.489] (--) evdev: CHESEN USB Keyboard: Vendor 0xa81 Product 0x101
[ 16.489] (--) evdev: CHESEN USB Keyboard: Found keys
[ 16.489] (II) evdev: CHESEN USB Keyboard: Configuring as keyboard
[ 16.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input2/event2"
[ 16.489] (II) XINPUT: Adding extended input device "CHESEN USB Keyboard" (type: KEYBOARD, id 10)
[ 16.489] (**) Option "xkb_rules" "evdev"
[ 16.489] (**) Option "xkb_model" "pc105"
[ 16.489] (**) Option "xkb_layout" "pl"
[ 16.490] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 16.490] (II) No input driver specified, ignoring this device.
[ 16.490] (II) This device may have been added with another device file.
[ 16.521] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 16.553] (II) fglrx(0): EDID vendor "SAM", prod id 1100
[ 16.553] (II) fglrx(0): Using EDID range info for horizontal sync
[ 16.553] (II) fglrx(0): Using EDID range info for vertical refresh
[ 16.553] (II) fglrx(0): Printing DDC gathered Modelines:
[ 16.553] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 16.553] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.553] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.553] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.553] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.553] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.553] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.553] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.553] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 16.553] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.553] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.553] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.553] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.553] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.553] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.553] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.553] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.553] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 18.440] (II) fglrx(0): EDID vendor "SAM", prod id 1100
[ 18.440] (II) fglrx(0): Using hsync ranges from config file
[ 18.440] (II) fglrx(0): Using vrefresh ranges from config file
[ 18.440] (II) fglrx(0): Printing DDC gathered Modelines:
[ 18.440] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 18.440] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.440] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 18.440] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 18.440] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 18.440] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 18.440] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.440] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.440] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 18.440] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 18.440] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 18.440] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.440] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 18.440] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 18.440] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 18.440] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 18.440] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 18.440] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 30.033] (II) fglrx(0): EDID vendor "SAM", prod id 1100
[ 30.033] (II) fglrx(0): Using hsync ranges from config file
[ 30.033] (II) fglrx(0): Using vrefresh ranges from config file
[ 30.033] (II) fglrx(0): Printing DDC gathered Modelines:
[ 30.033] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 30.033] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.033] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 30.033] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 30.033] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 30.033] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 30.033] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 30.033] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 30.033] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.033] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 30.033] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 30.033] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.033] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 30.033] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 30.033] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 30.033] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 30.033] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 30.033] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 32.107] (II) fglrx(0): EDID vendor "SAM", prod id 1100
[ 32.107] (II) fglrx(0): Using hsync ranges from config file
[ 32.107] (II) fglrx(0): Using vrefresh ranges from config file
[ 32.107] (II) fglrx(0): Printing DDC gathered Modelines:
[ 32.107] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 32.107] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 32.107] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 32.107] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 32.107] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 32.107] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 32.107] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 32.107] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 32.107] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 32.107] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 32.107] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 32.107] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 32.107] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 32.107] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 32.107] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 32.107] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 32.107] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 32.107] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 33.386] (II) fglrx(0): EDID vendor "SAM", prod id 1100
[ 33.386] (II) fglrx(0): Using hsync ranges from config file
[ 33.386] (II) fglrx(0): Using vrefresh ranges from config file
[ 33.386] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.386] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 33.386] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.386] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 33.386] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 33.386] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 33.386] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 33.387] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.387] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 33.387] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 33.387] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 33.387] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 33.387] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.387] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 33.387] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 33.387] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 33.387] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 33.387] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 33.387] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)[quote=ArnVaker]cały system jest 64-bitowy, czy tylko kernel?[/quote]
Cały.
[quote=yossarian]Możesz jeszcze przeinstalować fglrx-legacy-modules-dkms i pokazać czy się moduł poprawnie buduje.[/quote]
Błąd podczas budowania, logi:
Kod:
DKMS make.log for fglrx-8.97.100.7 for kernel 3.10-0.bpo.3-amd64 (x86_64) Sat Oct 19 14:14:21 CEST 2013 make: Entering directory `/usr/src/linux-headers-3.10-0.bpo.3-amd64' LD /var/lib/dkms/fglrx/8.97.100.7/build/built-in.o CC [M] /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.o In file included from /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:469:0: /var/lib/dkms/fglrx/8.97.100.7/build/drm_proc.h: In function ‘FGLDRM_proc_init’: /var/lib/dkms/fglrx/8.97.100.7/build/drm_proc.h:98:2: error: implicit declaration of function ‘create_proc_entry’ [-Werror=implicit-function-declaration] /var/lib/dkms/fglrx/8.97.100.7/build/drm_proc.h:98:19: warning: assignment makes pointer from integer without a cast [enabled by default] /var/lib/dkms/fglrx/8.97.100.7/build/drm_proc.h:105:12: warning: assignment makes pointer from integer without a cast [enabled by default] /var/lib/dkms/fglrx/8.97.100.7/build/drm_proc.h:112:7: warning: assignment makes pointer from integer without a cast [enabled by default] /var/lib/dkms/fglrx/8.97.100.7/build/drm_proc.h:124:6: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/drm_proc.h:125:6: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c: In function ‘firegl_proc_init’: /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:591:14: warning: assignment makes pointer from integer without a cast [enabled by default] /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:603:13: warning: assignment makes pointer from integer without a cast [enabled by default] /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:610:12: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:610:27: error: ‘read_proc_t’ undeclared (first use in this function) /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:610:27: note: each undeclared identifier is reported only once for each function it appears in /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:610:39: error: expected expression before ‘)’ token /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:614:15: warning: assignment makes pointer from integer without a cast [enabled by default] /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:624:13: warning: assignment makes pointer from integer without a cast [enabled by default] /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:644:16: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:644:43: error: expected expression before ‘)’ token /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:649:16: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:653:16: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:662:13: warning: assignment makes pointer from integer without a cast [enabled by default] /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:665:16: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:665:43: error: expected expression before ‘)’ token /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:666:16: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:666:32: error: ‘write_proc_t’ undeclared (first use in this function) /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:666:45: error: expected expression before ‘)’ token /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:667:16: error: dereferencing pointer to incomplete type /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c: At top level: /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:516:1: warning: ‘firegl_debug_proc_read_wrap’ defined but not used [-Wunused-function] /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:521:12: warning: ‘firegl_debug_proc_write_wrap’ defined but not used [-Wunused-function] /var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.c:539:12: warning: ‘firegl_major_proc_read’ defined but not used [-Wunused-function] cc1: some warnings being treated as errors make[3]: *** [/var/lib/dkms/fglrx/8.97.100.7/build/firegl_public.o] Error 1 make[2]: *** [_module_/var/lib/dkms/fglrx/8.97.100.7/build] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 make: Leaving directory `/usr/src/linux-headers-3.10-0.bpo.3-amd64'
Offline
#8 2013-10-19 14:25:11
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
Na 3.8 akurat powinny działać te stery, wersja z Sida na nowszych. A sprawdzać na starszym jak najbardziej jest sens — aby upewnić się co jest przyczyną problemu.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#9 2013-10-19 14:26:09
robin92 - Użytkownik
- robin92
- Użytkownik
- Zarejestrowany: 2013-10-19
Re: X Error of failed request
@ArnVaker
Trzeba będzie przeinstalowywać sterowniki w takim razie, nie?
Offline
#10 2013-10-19 14:26:37
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
Żeby co?
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#11 2013-10-19 14:32:32
robin92 - Użytkownik
- robin92
- Użytkownik
- Zarejestrowany: 2013-10-19
Re: X Error of failed request
@ArnVaker
Z tego co kojarzę to fglrx nie działają po prostu po przełączeniu kernela. Trzeba je przeinstalować, tak?
Offline
#12 2013-10-19 14:33:37
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
W przypadku instalacji z repozytorium dkms powinien automatycznie zbudować moduł dla nowego kernela.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#13 2013-10-19 20:12:39
robin92 - Użytkownik
- robin92
- Użytkownik
- Zarejestrowany: 2013-10-19
Re: X Error of failed request
Na 3.2 wszystko działa.
Offline
#14 2013-10-19 20:26:53
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
Można spróbować wersję z Sida zainstalować, ta powinna działać na 3.10. Tylko nie wiadomo czy zależności pozwolą, trzeba by sprawdzić.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#15 2013-10-19 20:29:29
robin92 - Użytkownik
- robin92
- Użytkownik
- Zarejestrowany: 2013-10-19
Re: X Error of failed request
@ArnVaker
Instalacja wersji z Sida polega na dodaniu do źródeł i wydania polecenia?
Offline
#16 2013-10-19 20:34:33
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
Z grubsza. Tylko tak żeby nie pomieszać za dużo. :) Czekaj, sprawdzę czy to wchodzi w ogóle.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#17 2013-10-19 21:09:08
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
OK, powinno się dać. Dodaj repo Sida (sekcje contrib i non-free wystarczą, main nie trzeba) i puść:
Kod:
aptitude update aptitude safe-upgrade fglrx~i
Potem usuń to repo. Ewentualnie gdybyś chciał mieszać coś więcej: http://dug.net.pl/tekst/163/priorytety_pakietow_%28apt_pinning__pin_priority%29/
PS Przepraszam za kolejnego posta pod rząd.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#18 2013-10-19 21:17:00
robin92 - Użytkownik
- robin92
- Użytkownik
- Zarejestrowany: 2013-10-19
Re: X Error of failed request
@ArnVaker
Dzięki :)
Offline
#19 2013-10-19 21:18:05
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: X Error of failed request
Ale działa, czy tak z góry dziękujesz?
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00007 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00074 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.145.180.152' WHERE u.id=1 |
| 0.00067 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.145.180.152', 1732389668) |
| 0.00046 | SELECT * FROM punbb_online WHERE logged<1732389368 |
| 0.00046 | SELECT topic_id FROM punbb_posts WHERE id=243225 |
| 0.00005 | SELECT id FROM punbb_posts WHERE topic_id=24426 ORDER BY posted |
| 0.00051 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24426 AND t.moved_to IS NULL |
| 0.00005 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00147 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24426 ORDER BY p.id LIMIT 0,25 |
| 0.00089 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24426 |
| Total query time: 0.00541 s | |