Forum Debian Users Gang

Polskie forum dyskusyjne miłośników dystrybucji Debian GNU/Linux

Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

Forum Debian Users Gang
» Hardware
» BCM4313 - karta nie działa

#1 2013-10-26 17:51:56

Graffi - Użytkownik

Graffi: Użytkownik; Skąd: Sulejówek; Zarejestrowany: 2005-10-03; Serwis

BCM4313 - karta nie działa

mam taką kartę WiFi:

Kod:

02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)

działała do przedwczoraj kiedy to zacząłem coś kombinować z ustawieniami w BIOSie, UEFI itp... i coś posypałem z systemem (nieważne już teraz)
wrzuciłem instalkę (bo system i tak był nasrany pakietami na maksa) Debiana, zainstalowałem system..
i za chorobę od przedwczoraj wieczorem nie umiem ożywić swojej karty, przejrzałem już pierdylion tutotiali, zainstalowałem pierdylion pakietów, i nic to nie daje, najlepszym etapem na jakim byłem to także karta się łączy do sieci i gubi 99,9% pakietów a ten 0,1% który dociera ma czas powyżej 200ms - więc jeden wielki penis :(

karta jak jeszcze działała siedziałem na kernelu 3.2.xx (stary stary... stary...) i nie kasowałem bo na żadnym nowszym karta nie chciała działać, na chwilę obecną siedzę z ręką w nocniku bo nie mam jak wrócić do tej wersji a na żadnym nowszym kernelu dostępnym w Debianie karta nie działa

ktoś zna jakiś działający sposób?
ta karta jest tak tragiczna że słów brakuje, gdyby nie to że laptop ma w BIOSie podpisane urządzenia to bym ją wymienił w cholerę, ale z inną kartą nie uruchamia się komputer (a może lepiej BIOSa spachować?)

to było chyba najlepsze co udało mi się osiągnąć: [url=http://4d43.wordpress.com/2013/09/08/debian-jessie-3-10-kernel-and-goddamn-broadcom-bcm4313/]karta zaczęła działać - ale gubi prawie wszystkie pakiety[/url] ale cośtam jednak działało, instalacja podobnego pakietu z SIDa (w miejsce tego Ubuntowego) zepsuło całkiem ruch na WiFi (chociaż karta dalej udawała że działa łącząc się)

Offline

#2 2013-10-26 17:59:54

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: BCM4313 - karta nie działa

A masz Ubuntu, że tak kombinujesz jakimiś ubuporadnikami?
https://wiki.debian.org/brcm80211

Offline

#3 2013-10-26 18:06:33

Graffi - Użytkownik

Graffi: Użytkownik; Skąd: Sulejówek; Zarejestrowany: 2005-10-03; Serwis

Re: BCM4313 - karta nie działa

człowiek napisał że mu pod Debianem działa (a przynajmniej tak przy moim poziomie angielskiego człowieka zrozumiałem) a twoja porada bardzo miła i pewnie bardzo z serca jest kompletnie niedziałająca, jakby rozwiązanie było tak proste to bym dupy na forum nie zawracał nikomu :P

jest coś spieprzone w Debianie i nie wiem co kompletnie, pewnie istnieje jakaś sztuczka na obejście tego

Offline

#4 2013-10-26 18:09:02

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: BCM4313 - karta nie działa

Mieszanie gałęzi albo wręcz dystrybucji rzadko przynosi pozytywne skutki.
Ten poradnik to totalna prowizorka, częsta u uzyszkodników ubuntu.

A to że nie działa, to nic nie mówi.
Podaj jakieś logi.

Offline

#5 2013-10-26 18:11:45

Graffi - Użytkownik

Graffi: Użytkownik; Skąd: Sulejówek; Zarejestrowany: 2005-10-03; Serwis

Re: BCM4313 - karta nie działa

[quote=yossarian]Mieszanie gałęzi albo wręcz dystrybucji rzadko przynosi pozytywne skutki.[/quote]
jednak ożywiło kartę :P

dobra, dmesg? /var/log/..co...?

Offline

#6 2013-10-26 18:18:25

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: BCM4313 - karta nie działa

jednak ożywiło kartę :P[/quote]
Jeżeli to nie była prowizorka, to skąd ten wątek? ;)
Kod:
uname -r
dmesg
lsmod
grep -i blacklist /etc/modprobe.d/*
Ostatnio edytowany przez yossarian (2013-10-26 18:19:13)

Offline

#7 2013-10-26 18:26:09

Graffi - Użytkownik

Graffi: Użytkownik; Skąd: Sulejówek; Zarejestrowany: 2005-10-03; Serwis

Re: BCM4313 - karta nie działa

dobra, ponabijałeś się - ok.
szukam rozwiązania (tak jakby to nie zostało w żaden sposób nadmienione nigdzie jeszcze) i szukając natrafiłem na to że kolesiowi miało działać - więc sprawdziłem, niby kartę sterownik podniósł ale jak do dupy było tak jest nadal do dupy - wyjaśniłem powód instalacji pakietu?
ten ubuntowy pakiet usunąłem - i teraz karta ożywa na sterowniku z Debiana - to dopiero jest czad no nie?

podsumowując na module "wl" - łączy się, stabilne połączenie ale nic nie działa
na "brcmsmac" łączy się i rozłącza co 2 - 3 sekundy i nie działa wcale lepiej nic na "wl"

Kod:

graffi@dunwyn ~ $ lsmod 
Module                  Size  Used by
brcmsmac              443653  0 
cordic                 12352  1 brcmsmac
brcmutil               13093  1 brcmsmac
bcma                   33472  1 brcmsmac
mac80211              358182  1 brcmsmac
cfg80211              319971  2 brcmsmac,mac80211
arc4                   12543  2 
fuse                   67503  1 
coretemp               12898  0 
snd_hda_codec_hdmi     31720  1 
rts5139               199252  0 
kvm_intel             123583  0 
kvm                   301458  1 kvm_intel
snd_hda_codec_conexant    40314  1 
uvcvideo               66788  0 
videobuf2_vmalloc      12848  1 uvcvideo
videobuf2_memops       12519  1 videobuf2_vmalloc
videobuf2_core         31098  1 uvcvideo
videodev               92407  2 uvcvideo,videobuf2_core
media                  18240  2 uvcvideo,videodev
btusb                  17678  0 
bluetooth             170002  2 btusb
joydev                 17278  0 
crc32c_intel           21850  0 
lib80211_crypt_tkip    13283  0 
snd_hda_intel          35718  2 
snd_hda_codec         122850  3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
ghash_clmulni_intel    13062  0 
cryptd                 14560  1 ghash_clmulni_intel
iTCO_wdt               12831  0 
iTCO_vendor_support    12704  1 iTCO_wdt
snd_hwdep              13189  1 snd_hda_codec
snd_pcm                68525  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
lib80211               12941  1 lib80211_crypt_tkip
i915                  494628  3 
ideapad_laptop         17549  0 
sparse_keymap          12760  1 ideapad_laptop
snd_page_alloc         13018  2 snd_pcm,snd_hda_intel
snd_timer              22773  1 snd_pcm
lpc_ich                16757  0 
mfd_core               12601  1 lpc_ich
microcode              30413  0 
ac                     12668  0 
battery                13101  0 
psmouse                74832  0 
serio_raw              12940  0 
mperf                  12453  0 
pcspkr                 12632  0 
video                  17792  1 i915
button                 12944  1 i915
drm_kms_helper         31837  1 i915
drm                   211856  4 i915,drm_kms_helper
i2c_algo_bit           12841  1 i915
i2c_i801               17045  0 
i2c_core               24353  6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
snd                    53068  11 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
evdev                  17611  22 
processor              28526  0 
rfkill                 19242  4 cfg80211,ideapad_laptop,bluetooth
mei_me                 13568  0 
mei                    45886  1 mei_me
soundcore              13026  1 snd
ext4                  381419  3 
crc16                  12343  2 ext4,bluetooth
jbd2                   76205  1 ext4
mbcache                13082  1 ext4
hid_generic            12393  0 
usbhid                 40964  0 
hid                    81894  3 hid_generic,usbhid
sg                     26095  0 
sr_mod                 21988  0 
sd_mod                 40541  4 
cdrom                  35212  1 sr_mod
crc_t10dif             12348  1 sd_mod
thermal                17468  0 
thermal_sys            23137  3 video,thermal,processor
ahci                   25148  3 
libahci                23136  1 ahci
libata                141969  2 ahci,libahci
ehci_pci               12472  0 
xhci_hcd               78280  0 
ehci_hcd               40590  1 ehci_pci
alx                    28089  0 
mdio                   12653  1 alx
scsi_mod              158249  5 sg,rts5139,libata,sd_mod,sr_mod
usbcore               134993  7 btusb,uvcvideo,rts5139,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common             12440  1 usbcore
graffi@dunwyn ~ $

Kod:

[    4.555968] [drm] Driver supports precise vblank timestamp query.
[    4.556060] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.566196] cfg80211: Calling CRDA to update world regulatory domain
[    4.566802] lib80211: common routines for IEEE802.11 drivers
[    4.566804] lib80211_crypt: registered algorithm 'NULL'
[    4.593695] fbcon: inteldrmfb (fb0) is primary device
[    4.663287] Error: Driver 'pcspkr' is already registered, aborting...
[    4.750732] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[    4.750786] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x13
[    4.755284] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[    4.755344] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x13
[    4.755764] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[    4.755813] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x13
[    4.756114] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[    4.756198] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.770208] iTCO_vendor_support: vendor-support=0
[    4.780463] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    4.780495] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    4.780602] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.815694] wl: module license 'MIXED/Proprietary' taints kernel.
[    4.815694] Disabling lock debugging due to kernel taint
[    4.852215] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[    5.011210] lib80211_crypt: registered algorithm 'TKIP'
[    5.011634] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[    5.173191] Bluetooth: Core ver 2.16
[    5.173211] NET: Registered protocol family 31
[    5.173212] Bluetooth: HCI device and connection manager initialized
[    5.173220] Bluetooth: HCI socket layer initialized
[    5.173222] Bluetooth: L2CAP socket layer initialized
[    5.173229] Bluetooth: SCO socket layer initialized
[    5.187913] usbcore: registered new interface driver btusb
[    5.232146] media: Linux media interface: v0.10
[    5.253480] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[    5.279604] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[    5.283369] Linux video capture interface: v2.00
[    5.342056] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e1)
[    5.343116] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input9
[    5.343170] usbcore: registered new interface driver uvcvideo
[    5.343170] USB Video Class driver (1.1.1)
[    5.404802] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[    5.413071] Console: switching to colour frame buffer device 170x48
[    5.417689] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.417691] i915 0000:00:02.0: registered panic notifier
[    5.419735] acpi device:3d: registered as cooling_device4
[    5.419866] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.419906] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    5.419970] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.420143] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    5.441908] cfg80211: World regulatory domain updated:
[    5.441912] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.441914] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.441916] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.441917] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.441919] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.441920] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.506350] hda_codec: CX20590: BIOS auto-probing.
[    5.507702] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[    5.621314] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    5.625305] scsi6 : SCSI emulation for RTS5139 USB card reader
[    5.625467] usbcore: registered new interface driver rts5139
[    5.625489] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    5.626075] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    5.629357] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    5.632656] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    5.632773] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    5.633252] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.837524] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    6.463796] EXT4-fs (sda3): re-mounted. Opts: (null)
[    6.906865] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    7.644914] fuse init (API version 7.22)
[    7.854490] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.909083] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   11.772556] alx 0000:01:00.0: irq 45 for MSI/MSI-X
[   11.772722] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.773702] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
[   11.774337] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  120.361179] alx 0000:01:00.0 eth0: Link Down
[  322.776927] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
[  328.256146] cfg80211: Calling CRDA to update world regulatory domain
[  328.259661] cfg80211: World regulatory domain updated:
[  328.259664] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  328.259666] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  328.259668] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  328.259669] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  328.259671] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  328.259672] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  732.799543] cfg80211: Calling CRDA to update world regulatory domain
[  732.837487] cfg80211: World regulatory domain updated:
[  732.837491] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  732.837494] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  732.837496] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  732.837498] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  732.837500] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  732.837502] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.314834] cfg80211: Calling CRDA to update world regulatory domain
[  735.318558] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[  735.318592] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[  735.318620] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[  735.318672] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[  735.319575] cfg80211: World regulatory domain updated:
[  735.319578] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  735.319580] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.319582] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.319583] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  735.319585] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.319586] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.331381] bcma: bus0: Bus registered
[  735.333093] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[  735.353980] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  735.354227] cfg80211: Calling CRDA for country: US
[  735.357195] cfg80211: Regulatory domain changed to country: US
[  735.357199] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  735.357201] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  735.357203] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  735.357204] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.357205] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.357207] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.357208] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  735.357210] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  735.383539] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[  735.391478] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[  735.444174] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  735.444184] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[  735.444930] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  736.811498] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  736.815203] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  736.816648] wlan0: authenticated
[  736.818808] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  736.824563] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  736.825005] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  736.825009] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  736.825017] wlan0: associated
[  736.825026] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  736.892573] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  738.549355] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  738.549363] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  738.549366] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  738.597869] cfg80211: Calling CRDA to update world regulatory domain
[  738.601716] cfg80211: World regulatory domain updated:
[  738.601720] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  738.601722] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  738.601723] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  738.601725] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  738.601726] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  738.601727] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  739.485455] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  739.487295] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  739.510995] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  739.523069] wlan0: authenticated
[  739.525093] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  739.619547] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  739.620083] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  739.620086] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  739.620088] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  739.620095] wlan0: associated
[  748.560816] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  748.560826] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  748.560829] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  748.594260] cfg80211: Calling CRDA to update world regulatory domain
[  748.597963] cfg80211: World regulatory domain updated:
[  748.597966] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  748.597969] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  748.597970] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  748.597972] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  748.597973] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  748.597975] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  749.494220] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  749.495831] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  749.497637] wlan0: authenticated
[  749.501596] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  749.507390] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  749.508135] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  749.508139] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  749.508141] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  749.508150] wlan0: associated
[  768.585882] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  768.585891] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  768.585893] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  768.606474] cfg80211: Calling CRDA to update world regulatory domain
[  768.609958] cfg80211: World regulatory domain updated:
[  768.609961] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  768.609963] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  768.609964] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  768.609966] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  768.609967] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  768.609968] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  769.519512] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  769.520974] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  769.538022] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  769.645822] wlan0: send auth to 00:0c:42:b7:9b:fb (try 3/3)
[  769.647111] wlan0: authenticated
[  769.650745] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  769.753258] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  769.753684] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  769.753688] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  769.753689] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  769.753697] wlan0: associated
[  775.977320] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  775.977329] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  775.977332] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  775.995959] cfg80211: Calling CRDA to update world regulatory domain
[  775.999632] cfg80211: World regulatory domain updated:
[  775.999636] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  775.999638] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  775.999640] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  775.999641] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  775.999642] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  775.999644] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  776.913684] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  776.915188] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  776.918644] wlan0: authenticated
[  776.920957] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  777.102170] wlan0: associate with 00:0c:42:b7:9b:fb (try 2/3)
[  777.194430] wlan0: associate with 00:0c:42:b7:9b:fb (try 3/3)
[  777.294277] wlan0: association with 00:0c:42:b7:9b:fb timed out
[  797.571212] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  797.572839] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  797.600842] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  797.610826] wlan0: authenticated
[  797.614498] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  797.783382] wlan0: associate with 00:0c:42:b7:9b:fb (try 2/3)
[  797.816509] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  797.816960] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  797.816964] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  797.816971] wlan0: associated
[  799.041504] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  808.650042] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  808.650067] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  808.650071] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  808.696142] cfg80211: Calling CRDA to update world regulatory domain
[  808.700113] cfg80211: World regulatory domain updated:
[  808.700117] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  808.700119] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  808.700121] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  808.700123] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  808.700124] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  808.700126] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  809.585350] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  809.587013] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  809.590022] wlan0: authenticated
[  809.592680] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  809.628795] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  809.629331] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  809.629335] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  809.629337] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  809.629344] wlan0: associated
[  811.618820] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  811.618827] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  811.618830] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  811.654506] cfg80211: Calling CRDA to update world regulatory domain
[  811.657776] cfg80211: World regulatory domain updated:
[  811.657780] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  811.657783] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  811.657786] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  811.657788] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  811.657790] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  811.657792] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  812.551587] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  812.553442] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  812.573557] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  812.579300] wlan0: authenticated
[  812.583247] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  812.758397] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  812.758858] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  812.758863] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  812.758865] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  812.758873] wlan0: associated
[  813.602540] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  813.602550] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  813.602553] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  813.645158] cfg80211: Calling CRDA to update world regulatory domain
[  813.648612] cfg80211: World regulatory domain updated:
[  813.648615] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  813.648617] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  813.648619] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  813.648620] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  813.648621] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  813.648623] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  814.537645] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  814.539194] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  814.617075] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  814.922373] wlan0: send auth to 00:0c:42:b7:9b:fb (try 3/3)
[  815.073131] wlan0: authenticated
[  815.077354] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  815.214052] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  815.214560] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  815.214564] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  815.214566] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  815.214574] wlan0: associated
[  826.338205] wlan0: deauthenticating from 00:0c:42:b7:9b:fb by local choice (reason=3)
[  826.394473] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  826.394482] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  826.394484] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  826.395893] cfg80211: Calling CRDA to update world regulatory domain
[  826.399371] cfg80211: World regulatory domain updated:
[  826.399374] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  826.399376] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  826.399378] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  826.399380] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  826.399381] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  826.399382] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  832.372715] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  832.374295] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  832.399503] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  832.415715] wlan0: authenticated
[  832.416197] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  832.499084] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  832.499606] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  832.499609] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  832.499616] wlan0: associated
[  832.605311] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  844.256602] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  844.256614] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  844.256618] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  844.301722] cfg80211: Calling CRDA to update world regulatory domain
[  844.305275] cfg80211: World regulatory domain updated:
[  844.305279] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  844.305281] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  844.305282] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  844.305284] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  844.305285] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  844.305287] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  845.191291] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  845.193180] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  845.211909] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  845.215727] wlan0: authenticated
[  845.218972] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  845.349819] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  845.350234] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  845.350238] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  845.350240] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  845.350248] wlan0: associated
[  850.636671] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  850.636682] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  850.636687] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  850.659623] cfg80211: Calling CRDA to update world regulatory domain
[  850.663399] cfg80211: World regulatory domain updated:
[  850.663403] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  850.663405] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  850.663407] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  850.663408] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  850.663410] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  850.663411] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  851.572884] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  851.574708] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  851.676467] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  851.711049] wlan0: send auth to 00:0c:42:b7:9b:fb (try 3/3)
[  851.815765] wlan0: authentication with 00:0c:42:b7:9b:fb timed out
[  852.777842] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  852.779646] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  852.796932] wlan0: authenticated
[  852.797419] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  852.809425] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  852.809932] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  852.809936] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  852.809938] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  852.809945] wlan0: associated
[  854.695890] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  854.695898] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  854.695901] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  854.711447] cfg80211: Calling CRDA to update world regulatory domain
[  854.714814] cfg80211: World regulatory domain updated:
[  854.714817] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  854.714819] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  854.714821] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  854.714822] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  854.714824] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  854.714825] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  855.628696] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  855.630139] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  855.631803] wlan0: authenticated
[  855.635866] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  855.700215] wlan0: associate with 00:0c:42:b7:9b:fb (try 2/3)
[  855.796556] wlan0: associate with 00:0c:42:b7:9b:fb (try 3/3)
[  855.855791] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  855.856323] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  855.856327] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  855.856329] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  855.856336] wlan0: associated
[  870.651727] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  870.651741] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  870.651745] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  870.667131] cfg80211: Calling CRDA to update world regulatory domain
[  870.670588] cfg80211: World regulatory domain updated:
[  870.670592] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  870.670594] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  870.670596] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  870.670597] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  870.670598] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  870.670600] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  871.585827] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  871.587654] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  871.612048] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  871.693025] wlan0: send auth to 00:0c:42:b7:9b:fb (try 3/3)
[  871.716202] wlan0: authenticated
[  871.717538] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  871.866636] wlan0: associate with 00:0c:42:b7:9b:fb (try 2/3)
[  871.941221] wlan0: associate with 00:0c:42:b7:9b:fb (try 3/3)
[  872.021913] wlan0: association with 00:0c:42:b7:9b:fb timed out
[  872.978981] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  872.980795] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  873.019582] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  873.079617] wlan0: send auth to 00:0c:42:b7:9b:fb (try 3/3)
[  873.149872] wlan0: authentication with 00:0c:42:b7:9b:fb timed out
[  879.936977] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  879.938737] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  879.973705] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  880.100641] wlan0: send auth to 00:0c:42:b7:9b:fb (try 3/3)
[  880.139752] wlan0: authentication with 00:0c:42:b7:9b:fb timed out
[  881.101871] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  881.103721] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  881.139380] wlan0: send auth to 00:0c:42:b7:9b:fb (try 2/3)
[  881.249722] wlan0: send auth to 00:0c:42:b7:9b:fb (try 3/3)
[  881.330099] wlan0: authentication with 00:0c:42:b7:9b:fb timed out
[  890.618047] wlan0: authenticate with 00:0c:42:b7:9b:fb
[  890.619810] wlan0: send auth to 00:0c:42:b7:9b:fb (try 1/3)
[  890.621363] wlan0: authenticated
[  890.621588] wlan0: associate with 00:0c:42:b7:9b:fb (try 1/3)
[  890.636169] wlan0: RX AssocResp from 00:0c:42:b7:9b:fb (capab=0x431 status=0 aid=1)
[  890.636701] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[  890.636705] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  890.636711] wlan0: associated
[  890.739244] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  895.728297] wlan0: deauthenticating from 00:0c:42:b7:9b:fb by local choice (reason=3)
[  895.735318] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  895.735328] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  895.735331] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  895.736793] cfg80211: Calling CRDA to update world regulatory domain
[  895.740131] cfg80211: World regulatory domain updated:
[  895.740135] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  895.740137] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  895.740138] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  895.740140] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  895.740141] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  895.740143] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1287.822505] cfg80211: Calling CRDA to update world regulatory domain
[ 1287.826107] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 1287.826142] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 1287.826170] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 1287.826224] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 1287.827305] cfg80211: World regulatory domain updated:
[ 1287.827308] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1287.827310] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1287.827312] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1287.827313] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1287.827314] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1287.827316] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1287.838888] bcma: bus0: Bus registered
[ 1287.840391] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 1287.841053] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 1287.841289] cfg80211: Calling CRDA for country: US
[ 1287.847163] cfg80211: Regulatory domain changed to country: US
[ 1287.847168] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1287.847170] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 1287.847172] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 1287.847173] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1287.847175] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1287.847176] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1287.847178] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 1287.847179] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 1287.848987] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[ 1287.849005] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[ 1287.901466] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1287.901477] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 1287.902085] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
graffi@dunwyn ~ $

Kod:

graffi@dunwyn ~ $ grep -i blacklist /etc/modprobe.d/*
/etc/modprobe.d/broadcom-sta-dkms.conf:blacklist b43
/etc/modprobe.d/broadcom-sta-dkms.conf:blacklist b43legacy
/etc/modprobe.d/broadcom-sta-dkms.conf:blacklist b44
/etc/modprobe.d/broadcom-sta-dkms.conf:blacklist bcma
/etc/modprobe.d/broadcom-sta-dkms.conf:blacklist brcm80211
/etc/modprobe.d/broadcom-sta-dkms.conf:blacklist brcmsmac
/etc/modprobe.d/broadcom-sta-dkms.conf:blacklist ssb
/etc/modprobe.d/fbdev-blacklist.conf:# This file blacklists most old-style PCI framebuffer drivers.
/etc/modprobe.d/fbdev-blacklist.conf:blacklist arkfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist aty128fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist atyfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist radeonfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist cirrusfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist cyber2000fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist gx1fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist gxfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist kyrofb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist matroxfb_base
/etc/modprobe.d/fbdev-blacklist.conf:blacklist mb862xxfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist neofb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist nvidiafb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist pm2fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist pm3fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist s3fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist savagefb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist sisfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist tdfxfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist tridentfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist viafb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist vt8623fb
graffi@dunwyn ~ $

Offline

#8 2013-10-26 18:26:19

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: BCM4313 - karta nie działa

[quote=Graffi]nie mam jak wrócić do tej wersji[/quote]
Why?

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#9 2013-10-26 18:35:21

Graffi - Użytkownik

Graffi: Użytkownik; Skąd: Sulejówek; Zarejestrowany: 2005-10-03; Serwis

Re: BCM4313 - karta nie działa

bo go nie widze w gałęzi stable już a ta wersja co tam leży nie rabotaju z tą kartą WiFi co mam
po prostu cały czas siedziałem na jakimś kernelu starym bo na nowszych karta nie działała więc czekałem aż zacznie działać na którymś nie wywalając cały czas tamtego - bo tam mi WiFi działało

wiem że tu ktoś oznajmiał na forum z nieprzemierzoną radością że nareszcie jakiś sterownik poprawiono i już w nowszych kernelach mają te karty działać - oczywiście u mnie nie działało więc dalej pozostałem na tamtym kernelu...

możliwe że skończy się na tym że sobie kartę w USB jakąś wsadzę i będę czekał aż moja zacznie kiedyś działać...

i zapewne mi zaraz rzucisz tu jakimś poradnikiem gdzie leżą pakiety które już nie leżą w repo oficjalnie ;)
tyle że ja nie pamiętam która to była wersja kernela... chociaż przez kilkanaście minut można przewalić kilka wersji i sprawdzić gdzie WiFi ruszy

kompletna porażka... w Googlarce jest też mnóstwo pytań jak te karty uruchomić a odpowiedzi za wiele już nie ma :(

Offline

#10 2013-10-26 18:36:27

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: BCM4313 - karta nie działa

Ja się nie nabijałem.
Ze sterownikami zamkniętymi jest tak, że czasem wystarczy jakaś aktualizacja (np. jądra) i problem wraca.
Dlatego IMHO lepiej najpierw obadać te otwarte.
Na wielu forach widziałem, że z ta karta całkiem normalnie działa z brcmsmac.

W jaki sposób się łączysz z siecią? I nie podałeś wersji jądra.

Ostatnio edytowany przez yossarian (2013-10-26 18:39:58)

Offline

#11 2013-10-26 18:42:21

Graffi - Użytkownik

Graffi: Użytkownik; Skąd: Sulejówek; Zarejestrowany: 2005-10-03; Serwis

Re: BCM4313 - karta nie działa

network-manager (aktualna wersja z testinga)
kernel (oba - nie działa):
3.10-3-amd64
3.2.0-4-amd64

EDIT:
tej karty jest kilka wersji, my Wife ma taką która się tak samo przedstawia a u niej zawsze są inne jazdy niż u mnie... chociaż u niej akurat na kernelu 3.10-3-amd64 działa (ot tak po prostu)

Ostatnio edytowany przez Graffi (2013-10-26 18:44:23)

Offline

#12 2013-10-26 18:43:28

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: BCM4313 - karta nie działa

Spróbuj się połączyć ręcznie bez NM.
Jakoś go zablokuj lub ubij.
https://wiki.debian.org/WiFi/HowToUse#Command_Line

Jeszcze możesz sprawdzić:

Kod:

iw dev wlan0 set power_save off

Ostatnio edytowany przez yossarian (2013-10-26 19:02:46)

Offline

#13 2013-10-26 19:11:24

Graffi - Użytkownik

Graffi: Użytkownik; Skąd: Sulejówek; Zarejestrowany: 2005-10-03; Serwis

Re: BCM4313 - karta nie działa

nie działa :(
idę liście grabić, przynajmniej coś pożytecznego zrobię...

Offline

Strony: 1

Forum Debian Users Gang
» Hardware
» BCM4313 - karta nie działa

Stopka forum

[ Generated in 0.009 seconds, 11 queries executed ]

Informacje debugowania

Time (s)	Query
0.00012	SET CHARSET latin2
0.00005	SET NAMES latin2
0.00064	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.188.227.192' WHERE u.id=1
0.00128	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.188.227.192', 1732386537)
0.00033	SELECT * FROM punbb_online WHERE logged<1732386237
0.00069	SELECT topic_id FROM punbb_posts WHERE id=243858
0.00007	SELECT id FROM punbb_posts WHERE topic_id=24479 ORDER BY posted
0.00033	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24479 AND t.moved_to IS NULL
0.00028	SELECT search_for, replace_with FROM punbb_censoring
0.00199	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24479 ORDER BY p.id LIMIT 0,25
0.00096	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24479
Total query time: 0.00674 s