Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2014-01-01 22:15:12

  andy - Użytkownik

andy
Użytkownik
Zarejestrowany: 2014-01-01

Czytnik kart pamięci nie widzi kart po ich włożeniu

Witam, niedawno zauważyłem że mój czytnik kart pamięci nie widzi kart, które do niego wkładam. Na początku pomyślałem, że może to wina samej karty SD, jednak sprawdziłem na 4 i nic. Gdy natomiast włączę laptopa z kartą SD włożoną do czytnika, to bez problemu później pojawia się w systemie. Gdy ją odmontuję i spróbuję włożyć raz jeszcze to czytnik jej nie widzi.
Karta jest tylko widoczna jak jest włożona przy uruchomieniu komputera.

Info o sprzęcie: Dell Inspiron SE 15r (7520).

lspci:

andy@nabuchodonozor:~$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Chelsea LP [Radeon HD 7730M]
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)[/quote]
lsusb:

andy@nabuchodonozor:~$ lsusb
Bus 002 Device 003: ID 8087:07da Intel Corp.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0c45:644a Microdia
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller [b]//Czytnik kart[/b]
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub[/quote]
System:

andy@nabuchodonozor:~$ lsb_release --all
No LSB modules are available.
Distributor ID:    Debian
Description:    Debian GNU/Linux unstable (sid)
Release:    unstable
Codename:    sid

andy@nabuchodonozor:~$ uname --all
Linux nabuchodonozor 3.12-1-amd64 #1 SMP Debian 3.12.6-2 (2013-12-29) x86_64 GNU/Linux

+ Niektóre pakiety z experimental: iceweasel, icedove. Nic głównego z systemu.[/quote]
lsmod:

andy@nabuchodonozor:~$ lsmod | grep rts5139
rts5139               320570  0 [b]//Moduł do obsługi czytnika[/b]
scsi_mod              178700  6 sg,rts5139,usb_storage,libata,sd_mod,sr_mod
usbcore               154167  8 btusb,uvcvideo,rts5139,usb_storage,ehci_hcd,ehci_pci,usbhid,xhci_hcd[/quote]
Inne:

andy@nabuchodonozor:~$ sudo udevadm monitor
[sudo] password for andy:
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
//Po włożeniu karty nic się nie pojawia. Gdy wepnę np. pendriva to mam:
KERNEL[4715.260555] add      /devices/pci0000:00/0000:00:14.0/usb3/3-2 (usb)
KERNEL[4715.260620] add      /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0 (usb)
UDEV  [4715.264521] add      /devices/pci0000:00/0000:00:14.0/usb3/3-2 (usb)
KERNEL[4715.334397] add      /module/usb_storage (module)
[...][/quote]
/dev:

andy@nabuchodonozor:~$ ls /dev | grep sd
sda
sda1
sda2
sda3
sda4
sda5
sdb[/quote]
fdisk przy włożonej karcie oraz przy wyjętej:

andy@nabuchodonozor:~$ sudo fdisk -l
[sudo] password for andy:

Dysk /dev/sda: 1000.2 GB, bajtów: 1000204886016
głowic: 255, sektorów/ścieżkę: 63, cylindrów: 121601, w sumie sektorów: 1953525168
Jednostka = sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Identyfikator dysku: 0x84e13a93

Urządzenie Rozruch   Początek      Koniec   Bloków   ID  System
/dev/sda1   *        2048     1218559      608256   83  Linux
/dev/sda2         1218560    62695423    30738432   82  Linux swap / Solaris
/dev/sda3        62695424   179881983    58593280   83  Linux
/dev/sda4       179884030  1953523711   886819841    5  Rozszerzona
/dev/sda5       179884032  1953523711   886819840   83  Linux[/quote]
Na Debianie jestem od ok dwóch miesięcy. Wcześniej byłem na Ubuntu i problemów z czytnikiem nie było. Jestem nawet pewny, że czytnik na Debianie wcześniej działał.

Offline

 

#2  2014-01-01 22:21:04

  azhag - Admin łajza

azhag
Admin łajza
Skąd: Warszawa
Zarejestrowany: 2005-11-15

Re: Czytnik kart pamięci nie widzi kart po ich włożeniu

Witamy na DUG-u,

1. dmesg po włożeniu czytnika poproszę
2. wkładasz do tego samego portu? Nie przez huba (zewnętrznego lub "wbudowanego") bądź do portu "lowpower"? (miałem kiedyś taki zakichany czytnik, tak łasy na prąd, że działał tylko w bezpośrednim porcie)

Błogosławieni, którzy czynią FAQ.
[url=http://www.opencaching.pl]opencaching[/url] :: [url=http://dug.net.pl/sources.list]debian sources.list[/url] :: [url=http://www.linuxportal.pl/blogi/azhag/wpisy]coś jakby blog[/url] :: [url=http://dug.net.pl/]polski portal debiana[/url] :: linux user #403712

Offline

 

#3  2014-01-01 22:33:57

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: Czytnik kart pamięci nie widzi kart po ich włożeniu

U mnie pomaga:

Kod:

eject -t /dev/sdb

Lub:

Kod:

mount /dev/sdb /mnt/1

Wtedy czytnik ([b]/dev/sdb[/b]) 'wykrywa' kartę.

Offline

 

#4  2014-01-01 22:44:37

  andy - Użytkownik

andy
Użytkownik
Zarejestrowany: 2014-01-01

Re: Czytnik kart pamięci nie widzi kart po ich włożeniu

Dzięki za szybką odpowiedź.

1. dmesg po włożeniu czytnika poproszę[/quote]
To czytnik wbudowany w lapa i nie mam jak go wyciągnąć bez jego rozebrania.

Poniżej jednak dmesg z włożoną kartą SD przy uruchomieniu - jak pisałem wyżej wtedy czytnik razem z kartą jest widoczny.

Kod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-10) ) #1 SMP Debian 3.12.6-2 (2013-12-29)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.12-1-amd64 root=UUID=c1cf7498-3282-4d78-81ee-6ac3e3006a39 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009aabefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc. Inspiron 7520/Type2 - Board Product Name1, BIOS A00 03/24/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09B000000 mask FFF000000 uncachable
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 0FFA00000 mask FFFE00000 write-protect
[    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask FC0000000 write-back
[    0.000000]   8 base 240000000 mask FE0000000 write-back
[    0.000000]   9 base 25F600000 mask FFFE00000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01a91000, 0x01a91fff] PGTABLE
[    0.000000] BRK [0x01a92000, 0x01a92fff] PGTABLE
[    0.000000] BRK [0x01a93000, 0x01a93fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[    0.000000]  [mem 0x25f400000-0x25f5fffff] page 2M
[    0.000000] BRK [0x01a94000, 0x01a94fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
[    0.000000]  [mem 0x25c000000-0x25f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
[    0.000000]  [mem 0x200000000-0x25bffffff] page 2M
[    0.000000] BRK [0x01a95000, 0x01a95fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01a96000, 0x01a96fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0x9aabefff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0x9a9fffff] page 2M
[    0.000000]  [mem 0x9aa00000-0x9aabefff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[    0.000000]  [mem 0x9afff000-0x9affffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x364bc000-0x37255fff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 000000009affe210 00094 (v01 DELL    CL09    00000001      01000013)
[    0.000000] ACPI: FACP 000000009affa000 0010C (v05 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: DSDT 000000009afee000 08FD4 (v01 DELL    CL09    00000000 ASL  00040000)
[    0.000000] ACPI: FACS 000000009afb9000 00040
[    0.000000] ACPI: SLIC 000000009affd000 00176 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: UEFI 000000009affc000 00236 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: ASF! 000000009affb000 000A5 (v32 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: HPET 000000009aff9000 00038 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: APIC 000000009aff8000 0008C (v03 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: MCFG 000000009aff7000 0003C (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 000000009afed000 006FE (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 000000009afeb000 00028 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: ASPT 000000009afe6000 00034 (v07 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: FPDT 000000009afe4000 00044 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 000000009afe3000 00860 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000009afe2000 00A92 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000009afe0000 01ED5 (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
[    0.000000] ACPI: DMI detected: Dell Inspiron 15R SE
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
[    0.000000]   NODE_DATA [mem 0x25f5f4000-0x25f5f7fff]
[    0.000000]  [ffffea0000000000-ffffea00085fffff] PMD -> [ffff880256c00000-ffff88025ddfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x25f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0x9aabefff]
[    0.000000]   node   0: [mem 0x9afff000-0x9affffff]
[    0.000000]   node   0: [mem 0x100000000-0x25f5fffff]
[    0.000000] On node 0 totalpages: 2072155
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8599 pages used for memmap
[    0.000000]   DMA32 zone: 628927 pages, LIFO batch:31
[    0.000000]   Normal zone: 19677 pages used for memmap
[    0.000000]   Normal zone: 1439232 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025f200000 s85888 r8192 d20608 u262144
[    0.000000] pcpu-alloc: s85888 r8192 d20608 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2043802
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.12-1-amd64 root=UUID=c1cf7498-3282-4d78-81ee-6ac3e3006a39 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8079780K/8288620K available (4726K kernel code, 679K rwdata, 1596K rodata, 972K init, 944K bss, 208840K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2095.154 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.30 BogoMIPS (lpj=8380616)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000031] Security Framework initialized
[    0.000035] AppArmor: AppArmor disabled by boot time parameter
[    0.000036] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.000541] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002823] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003841] Mount-cache hash table entries: 256
[    0.004006] Initializing cgroup subsys memory
[    0.004018] Initializing cgroup subsys devices
[    0.004020] Initializing cgroup subsys freezer
[    0.004021] Initializing cgroup subsys net_cls
[    0.004023] Initializing cgroup subsys blkio
[    0.004024] Initializing cgroup subsys perf_event
[    0.004049] CPU: Physical Processor ID: 0
[    0.004050] CPU: Processor Core ID: 0
[    0.004055] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.004055] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004494] mce: CPU supports 9 MCE banks
[    0.004508] CPU0: Thermal monitoring enabled (TM1)
[    0.004518] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.004518] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.004518] tlb_flushall_shift: 1
[    0.004638] Freeing SMP alternatives memory: 20K (ffffffff8199e000 - ffffffff819a3000)
[    0.005748] ACPI: Core revision 20130725
[    0.011556] ACPI: All ACPI Tables successfully acquired
[    0.026683] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.066388] smpboot: CPU0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz (fam: 06, model: 3a, stepping: 09)
[    0.066396] TSC deadline timer enabled
[    0.066404] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.066411] ... version:                3
[    0.066412] ... bit width:              48
[    0.066413] ... generic registers:      4
[    0.066414] ... value mask:             0000ffffffffffff
[    0.066415] ... max period:             0000ffffffffffff
[    0.066416] ... fixed-purpose events:   3
[    0.066417] ... event mask:             000000070000000f
[    0.080335] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.066674] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 #   4 #   5 #   6 #   7 OK
[    0.162320] Brought up 8 CPUs
[    0.162323] smpboot: Total of 8 processors activated (33522.46 BogoMIPS)
[    0.170075] devtmpfs: initialized
[    0.173049] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[    0.173246] NET: Registered protocol family 16
[    0.173333] cpuidle: using governor ladder
[    0.173335] cpuidle: using governor menu
[    0.173359] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.173360] ACPI: bus type PCI registered
[    0.173362] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.173421] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.173423] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.199491] PCI: Using configuration type 1 for base access
[    0.199499] dmi type 0xB1 record - unknown flag
[    0.200221] bio: create slab <bio-0> at 0
[    0.200370] ACPI: Added _OSI(Module Device)
[    0.200372] ACPI: Added _OSI(Processor Device)
[    0.200373] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.200374] ACPI: Added _OSI(Processor Aggregator Device)
[    0.200376] ACPI: Deleted _OSI(Windows 2012)
[    0.201711] ACPI: EC: Look up EC in DSDT
[    0.203041] ACPI: Executed 1 blocks of module-level executable AML code
[    0.222661] ACPI: SSDT 000000009adf9018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.223012] ACPI: Dynamic OEM Table Load:
[    0.223014] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.238176] ACPI: SSDT 000000009adfaa98 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.238561] ACPI: Dynamic OEM Table Load:
[    0.238562] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.254019] ACPI: SSDT 000000009adf8d98 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.254361] ACPI: Dynamic OEM Table Load:
[    0.254363] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.267367] ACPI: Interpreter enabled
[    0.267375] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[    0.267380] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[    0.267395] ACPI: (supports S0 S3 S4 S5)
[    0.267397] ACPI: Using IOAPIC for interrupt routing
[    0.267428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.267575] ACPI: No dock devices found.
[    0.461297] ACPI: Power Resource [FN00] (off)
[    0.461381] ACPI: Power Resource [FN01] (off)
[    0.461465] ACPI: Power Resource [FN02] (off)
[    0.461547] ACPI: Power Resource [FN03] (off)
[    0.461628] ACPI: Power Resource [FN04] (off)
[    0.462308] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.462361] \_SB_.PCI0:_OSC invalid UUID
[    0.462362] _OSC request data:1 8 0 
[    0.462410] \_SB_.PCI0:_OSC invalid UUID
[    0.462411] _OSC request data:1 1f 0 
[    0.462414] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.462416] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.463044] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[    0.463125] PCI host bridge to bus 0000:00
[    0.463127] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.463130] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.463132] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.463133] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.463135] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[    0.463143] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.463223] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.463256] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.463291] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.463327] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.463338] pci 0000:00:02.0: reg 0x10: [mem 0xc1000000-0xc13fffff 64bit]
[    0.463345] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.463349] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.463443] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.463467] pci 0000:00:14.0: reg 0x10: [mem 0xc1600000-0xc160ffff 64bit]
[    0.463542] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.463588] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.463625] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.463650] pci 0000:00:16.0: reg 0x10: [mem 0xc1614000-0xc161400f 64bit]
[    0.463729] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.463808] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.464127] pci 0000:00:1a.0: reg 0x10: [mem 0xc1619000-0xc16193ff]
[    0.465958] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.466030] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.466047] pci 0000:00:1b.0: reg 0x10: [mem 0xc1610000-0xc1613fff 64bit]
[    0.466123] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.466192] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.466274] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.466324] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.466357] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.466438] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.466480] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.466524] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.466836] pci 0000:00:1d.0: reg 0x10: [mem 0xc1618000-0xc16183ff]
[    0.468658] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.468711] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.468746] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.468917] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.468939] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.468947] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.468956] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.468964] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.468973] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.468982] pci 0000:00:1f.2: reg 0x24: [mem 0xc1617000-0xc16177ff]
[    0.469029] pci 0000:00:1f.2: PME# supported from D3hot
[    0.469092] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.469109] pci 0000:00:1f.3: reg 0x10: [mem 0xc1615000-0xc16150ff 64bit]
[    0.469131] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.469271] pci 0000:01:00.0: [1002:682f] type 00 class 0x030000
[    0.469284] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.469293] pci 0000:01:00.0: reg 0x18: [mem 0xc0000000-0xc003ffff 64bit]
[    0.469299] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.469310] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.469343] pci 0000:01:00.0: supports D1 D2
[    0.469345] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.469423] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.478125] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.478130] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.478134] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.478140] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.478311] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.478382] pci 0000:07:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.478505] pci 0000:07:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
[    0.478581] pci 0000:07:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[    0.478912] pci 0000:07:00.0: supports D1 D2
[    0.478914] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.490190] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.490195] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.490203] pci 0000:00:1c.0:   bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[    0.490337] pci 0000:08:00.0: [8086:0887] type 00 class 0x028000
[    0.490385] pci 0000:08:00.0: reg 0x10: [mem 0xc1500000-0xc1501fff 64bit]
[    0.490617] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.502219] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.502226] pci 0000:00:1c.1:   bridge window [mem 0xc1500000-0xc15fffff]
[    0.574591] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.574648] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.574702] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.574757] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.574811] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.574865] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.574919] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.574972] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.575218] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.575225] ACPI: \_SB_.PCI0: notify handler is installed
[    0.575275] Found 1 acpi root devices
[    0.575307] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.575385] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.575390] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.575391] vgaarb: loaded
[    0.575392] vgaarb: bridge control possible 0000:01:00.0
[    0.575393] vgaarb: no bridge control possible 0000:00:02.0
[    0.575428] PCI: Using ACPI for IRQ routing
[    0.582241] PCI: pci_cache_line_size set to 64 bytes
[    0.582336] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.582338] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.582340] e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
[    0.582341] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[    0.582343] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[    0.582438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.582443] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.584466] Switched to clocksource hpet
[    0.585850] pnp: PnP ACPI init
[    0.585859] ACPI: bus type PNP registered
[    0.585881] pnp 00:00: [dma 4]
[    0.585897] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.585916] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.586007] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.586034] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.586070] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.586073] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.586075] system 00:04: [io  0xffff] has been reserved
[    0.586077] system 00:04: [io  0xffff] has been reserved
[    0.586079] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.586081] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.586083] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.586085] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.586087] system 00:04: [io  0xfd60-0xfd63] has been reserved
[    0.586089] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.586112] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.586154] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.586156] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.586186] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.586229] pnp 00:08: Plug and Play ACPI device, IDs DLL0572 PNP0f13 (active)
[    0.644664] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.644666] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.644668] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.644670] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.644672] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.644674] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.644676] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.644678] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[    0.644680] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[    0.644683] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.644685] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.644687] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.645012] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    0.645015] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[    0.645017] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.645039] pnp: PnP ACPI: found 11 devices
[    0.645040] ACPI: bus type PNP unregistered
[    0.651291] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.651317] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0040000-0xc005ffff pref]
[    0.651320] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.651322] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.651325] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.651328] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.651331] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.651335] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.651343] pci 0000:00:1c.0:   bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[    0.651349] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.651355] pci 0000:00:1c.1:   bridge window [mem 0xc1500000-0xc15fffff]
[    0.651364] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.651366] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.651368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.651369] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[    0.651371] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.651373] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[    0.651375] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.651377] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.651378] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc14fffff 64bit pref]
[    0.651380] pci_bus 0000:08: resource 1 [mem 0xc1500000-0xc15fffff]
[    0.651467] NET: Registered protocol family 2
[    0.651729] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.651929] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.652047] TCP: Hash tables configured (established 65536 bind 65536)
[    0.652063] TCP: reno registered
[    0.652074] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.652104] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.652210] NET: Registered protocol family 1
[    0.652223] pci 0000:00:02.0: Boot video device
[    0.684672] PCI: CLS 64 bytes, default 64
[    0.684709] Unpacking initramfs...
[    0.957437] Freeing initrd memory: 13928K (ffff8800364bc000 - ffff880037256000)
[    0.957441] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.957444] software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff]
[    0.957490] Simple Boot Flag at 0x44 set to 0x1
[    0.957779] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x10
[    0.957786] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x10
[    0.957793] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x10
[    0.957801] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x10
[    0.957805] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x10
[    0.957812] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x10
[    0.957822] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x10
[    0.957830] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x10
[    0.957878] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.958143] audit: initializing netlink socket (disabled)
[    0.958153] type=2000 audit(1388611423.932:1): initialized
[    0.972552] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.973160] VFS: Disk quotas dquot_6.5.2
[    0.973189] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.973268] msgmni has been set to 15808
[    0.973571] alg: No test for stdrng (krng)
[    0.973602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.973648] io scheduler noop registered
[    0.973649] io scheduler deadline registered
[    0.973679] io scheduler cfq registered (default)
[    0.973848] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.974126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.974139] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.974162] intel_idle: MWAIT substates: 0x21120
[    0.974163] intel_idle: v0.4 model 0x3A
[    0.974164] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.974357] GHES: HEST is not enabled!
[    0.974399] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.974799] Linux agpgart interface v0.103
[    0.974887] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.996994] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.996999] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.997095] mousedev: PS/2 mouse device common for all mice
[    0.997391] rtc_cmos 00:05: RTC can wake from S4
[    0.997515] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.997543] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.997550] Intel P-state driver initializing.
[    0.997559] Intel pstate controlling: cpu 0
[    0.997572] Intel pstate controlling: cpu 1
[    0.997582] Intel pstate controlling: cpu 2
[    0.997592] Intel pstate controlling: cpu 3
[    0.997601] Intel pstate controlling: cpu 4
[    0.997610] Intel pstate controlling: cpu 5
[    0.997626] Intel pstate controlling: cpu 6
[    0.997636] Intel pstate controlling: cpu 7
[    0.997658] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.997659] AMD IOMMUv2 functionality not available on this system
[    0.997745] TCP: cubic registered
[    0.997889] NET: Registered protocol family 10
[    0.998085] mip6: Mobile IPv6
[    0.998087] NET: Registered protocol family 17
[    0.998089] mpls_gso: MPLS GSO support
[    0.998352] registered taskstats version 1
[    0.998964] rtc_cmos 00:05: setting system clock to 2014-01-01 21:23:44 UTC (1388611424)
[    0.999011] PM: Hibernation image not present or could not be loaded.
[    0.999603] Freeing unused kernel memory: 972K (ffffffff818ab000 - ffffffff8199e000)
[    0.999604] Write protecting the kernel read-only data: 8192k
[    1.002820] Freeing unused kernel memory: 1408K (ffff8800014a0000 - ffff880001600000)
[    1.003873] Freeing unused kernel memory: 452K (ffff88000178f000 - ffff880001800000)
[    1.026544] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.077278] systemd-udevd[90]: starting version 204
[    1.086993] ACPI: Fan [FAN0] (off)
[    1.087036] ACPI: Fan [FAN1] (off)
[    1.087072] ACPI: Fan [FAN2] (off)
[    1.087110] ACPI: Fan [FAN3] (off)
[    1.087145] ACPI: Fan [FAN4] (off)
[    1.091851] thermal LNXTHERM:00: registered as thermal_zone0
[    1.091854] ACPI: Thermal Zone [TZ00] (28 C)
[    1.092092] ACPI: bus type USB registered
[    1.092120] usbcore: registered new interface driver usbfs
[    1.092131] usbcore: registered new interface driver hub
[    1.092188] thermal LNXTHERM:01: registered as thermal_zone1
[    1.092189] usbcore: registered new device driver usb
[    1.092192] ACPI: Thermal Zone [TZ01] (30 C)
[    1.093131] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.093136] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.093143] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.093243] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.093267] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.093429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.093432] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.093434] usb usb1: Product: xHCI Host Controller
[    1.093436] usb usb1: Manufacturer: Linux 3.12-1-amd64 xhci_hcd
[    1.093437] usb usb1: SerialNumber: 0000:00:14.0
[    1.093557] hub 1-0:1.0: USB hub found
[    1.093569] hub 1-0:1.0: 4 ports detected
[    1.094076] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.094082] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.094129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.094131] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.094133] usb usb2: Product: xHCI Host Controller
[    1.094135] usb usb2: Manufacturer: Linux 3.12-1-amd64 xhci_hcd
[    1.094136] usb usb2: SerialNumber: 0000:00:14.0
[    1.094242] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.094251] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.094257] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
[    1.094260] hub 2-0:1.0: USB hub found
[    1.094273] hub 2-0:1.0: 4 ports detected
[    1.094492] r8169 0000:07:00.0: irq 42 for MSI/MSI-X
[    1.094579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.094683] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc90010ea4000, d4:be:d9:24:fc:bb, XID 0c900800 IRQ 42
[    1.094686] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.094816] ehci-pci: EHCI PCI platform driver
[    1.096193] SCSI subsystem initialized
[    1.099232] libata version 3.00 loaded.
[    1.101914] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    1.105019] alg: No test for crc32 (crc32-pclmul)
[    1.105097] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    1.105107] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.105113] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.105128] ehci-pci 0000:00:1a.0: debug port 2
[    1.109034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.109051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1619000
[    1.120778] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.120829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.120831] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.120833] usb usb3: Product: EHCI Host Controller
[    1.120834] usb usb3: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[    1.120835] usb usb3: SerialNumber: 0000:00:1a.0
[    1.120954] hub 3-0:1.0: USB hub found
[    1.120960] hub 3-0:1.0: 2 ports detected
[    1.121133] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.121138] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.121141] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.121153] ehci-pci 0000:00:1d.0: debug port 2
[    1.125065] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.125078] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1618000
[    1.136795] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.136820] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.136821] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.136823] usb usb4: Product: EHCI Host Controller
[    1.136824] usb usb4: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[    1.136825] usb usb4: SerialNumber: 0000:00:1d.0
[    1.136927] hub 4-0:1.0: USB hub found
[    1.136933] hub 4-0:1.0: 2 ports detected
[    1.137033] ahci 0000:00:1f.2: version 3.0
[    1.137159] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.137218] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.137222] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.137227] ahci 0000:00:1f.2: setting latency timer to 64
[    1.145410] scsi0 : ahci
[    1.145628] scsi1 : ahci
[    1.145796] scsi2 : ahci
[    1.145975] scsi3 : ahci
[    1.146111] scsi4 : ahci
[    1.146240] scsi5 : ahci
[    1.146298] ata1: SATA max UDMA/133 abar m2048@0xc1617000 port 0xc1617100 irq 43
[    1.146299] ata2: DUMMY
[    1.146302] ata3: SATA max UDMA/133 abar m2048@0xc1617000 port 0xc1617200 irq 43
[    1.146303] ata4: DUMMY
[    1.146304] ata5: DUMMY
[    1.146305] ata6: DUMMY
[    1.405048] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    1.425379] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b
[    1.425385] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.425389] usb 1-3: Product: USB Receiver
[    1.425392] usb 1-3: Manufacturer: Logitech
[    1.428997] hidraw: raw HID events driver (C) Jiri Kosina
[    1.435674] usbcore: registered new interface driver usbhid
[    1.435676] usbhid: USB HID core driver
[    1.438791] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    1.441219] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/input/input3
[    1.441296] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-3:1
[    1.464988] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.468988] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.471420] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133
[    1.471425] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.471779] ata3.00: ATAPI: HL-DT-ST DVDRW/BDROM CT40N, A101, max UDMA/133
[    1.474202] ata3.00: configured for UDMA/133
[    1.477956] ata1.00: configured for UDMA/133
[    1.478187] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2AR2 PQ: 0 ANSI: 5
[    1.481793] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRWBD CT40N    A101 PQ: 0 ANSI: 5
[    1.486751] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.486776] sd 0:0:0:0: [sda] Write Protect is off
[    1.486778] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.486787] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.487558] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.487560] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.487632] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.488719] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.488767] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.537144] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.555766]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.556666] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.669414] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    1.669421] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.669833] hub 3-1:1.0: USB hub found
[    1.669904] hub 3-1:1.0: 6 ports detected
[    1.781245] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.913548] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.913555] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.913813] hub 4-1:1.0: USB hub found
[    1.913911] hub 4-1:1.0: 8 ports detected
[    1.957276] tsc: Refined TSC clocksource calibration: 2095.240 MHz
[    1.985523] usb 3-1.3: new high-speed USB device number 3 using ehci-pci
[    2.032599] PM: Starting manual resume from disk
[    2.032604] PM: Hibernation image partition 8:2 present
[    2.032605] PM: Looking for hibernation image.
[    2.032803] PM: Image not found (code -22)
[    2.032806] PM: Hibernation image not present or could not be loaded.
[    2.057610] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.078668] usb 3-1.3: New USB device found, idVendor=0bda, idProduct=0129
[    2.078673] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.078675] usb 3-1.3: Product: USB2.0-CRW
[    2.078677] usb 3-1.3: Manufacturer: Generic
[    2.078679] usb 3-1.3: SerialNumber: 20100201396000000
[    2.149438] usb 3-1.5: new high-speed USB device number 4 using ehci-pci
[    2.319516] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=644a
[    2.319522] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.319526] usb 3-1.5: Product: Laptop_Integrated_Webcam_E4HD
[    2.319528] usb 3-1.5: Manufacturer: CN00YCD67248724T14G8A00
[    2.397786] usb 4-1.5: new full-speed USB device number 3 using ehci-pci
[    2.494188] usb 4-1.5: New USB device found, idVendor=8087, idProduct=07da
[    2.494194] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.958131] Switched to clocksource tsc
[    3.609509] systemd-udevd[459]: starting version 204
[    4.568427] ACPI: AC Adapter [ACAD] (on-line)
[    4.666574] cfg80211: Calling CRDA to update world regulatory domain
[    4.725545] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input4
[    4.725551] ACPI: Power Button [PWRB]
[    4.725607] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[    4.725642] ACPI: Lid Switch [LID0]
[    4.725679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    4.725681] ACPI: Power Button [PWRF]
[    4.735724] ACPI: Requesting acpi_cpufreq
[    4.794866] ACPI: Battery Slot [BAT1] (battery absent)
[    4.897874] mei_me 0000:00:16.0: setting latency timer to 64
[    4.897907] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[    4.989833] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    4.989836] Copyright(c) 2003-2013 Intel Corporation
[    4.989904] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[    4.989971] iwlwifi 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.990091] iwlwifi 0000:08:00.0: irq 45 for MSI/MSI-X
[    5.079195] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    5.166332] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-2030-6.ucode
[    5.166471] iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    5.181607] hda_codec: CX20590: BIOS auto-probing.
[    5.182935] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[    5.220899] wmi: Mapper loaded
[    5.317702] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    5.317723] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.317741] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    5.317914] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[    5.317919] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.317923] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    5.317925] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
[    5.317927] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.317928] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    5.317930] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
[    5.317932] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.317933] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.380683] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    5.420579] Bluetooth: Core ver 2.16
[    5.420594] NET: Registered protocol family 31
[    5.420595] Bluetooth: HCI device and connection manager initialized
[    5.420603] Bluetooth: HCI socket layer initialized
[    5.420606] Bluetooth: L2CAP socket layer initialized
[    5.420611] Bluetooth: SCO socket layer initialized
[    5.503210] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    5.507671] usbcore: registered new interface driver btusb
[    5.526981] iTCO_vendor_support: vendor-support=0
[    5.539434] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[    5.539441] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.811020] input: Dell WMI hotkeys as /devices/virtual/input/input13
[    5.827192] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    5.827194] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    5.827195] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    5.827196] iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[    5.827290] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[    5.871499] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    5.891918] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    5.891942] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    5.892050] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.002480] [drm] Initialized drm 1.1.0 20060810
[    6.053589] [drm] Memory usable by graphics device = 2048M
[    6.053594] i915 0000:00:02.0: setting latency timer to 64
[    6.077235] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    6.077242] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.077243] [drm] Driver supports precise vblank timestamp query.
[    6.077287] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    6.107850] [drm] Wrong MCH_SSKPD value: 0x20100406
[    6.107853] [drm] This can cause pipe underruns and display issues.
[    6.107854] [drm] Please upgrade your BIOS to fix this.
[    6.125905] fbcon: inteldrmfb (fb0) is primary device
[    6.348746] [drm] radeon kernel modesetting enabled.
[    6.348765] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    6.734696] media: Linux media interface: v0.10
[    6.783964] Console: switching to colour frame buffer device 240x67
[    6.787968] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.787969] i915 0000:00:02.0: registered panic notifier
[    6.787976] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    6.788150] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    6.813405] acpi device:2c: registered as cooling_device14
[    6.813559] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    6.813599] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input14
[    6.813716] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    6.815768] acpi device:3b: registered as cooling_device15
[    6.815901] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.815972] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input15
[    6.816034] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.816383] [drm] initializing kernel modesetting (VERDE 0x1002:0x682F 0x1028:0x0572).
[    6.816418] [drm] register mmio base: 0xC0000000
[    6.816419] [drm] register mmio size: 262144
[    6.816420] vga_switcheroo: enabled
[    6.816519] ATPX version 1
[    6.911466] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    6.915358] scsi6 : SCSI emulation for RTS5139 USB card reader
[    6.915459] usbcore: registered new interface driver rts5139
[    6.915545] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    6.916255] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    6.956022] Linux video capture interface: v2.00
[    7.039773] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[    7.071537] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
[    7.158399] cfg80211: World regulatory domain updated:
[    7.158401] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.158403] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.158405] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.158407] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.158408] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.158410] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.158718] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_E4HD (0c45:644a)
[    7.185041] input: Laptop_Integrated_Webcam_E4HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input16
[    7.185095] usbcore: registered new interface driver uvcvideo
[    7.185096] USB Video Class driver (1.1.1)
[    7.231398] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input12
[    7.808911] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    8.091470] sd 6:0:0:0: [sdb] 15759360 512-byte logical blocks: (8.06 GB/7.51 GiB)
[    8.091591] sd 6:0:0:0: [sdb] Write Protect is off
[    8.091596] sd 6:0:0:0: [sdb] Mode Sense: 67 10 00 00
[    8.091734] sd 6:0:0:0: [sdb] Cache data unavailable
[    8.091739] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    8.347897] sd 6:0:0:0: [sdb] Cache data unavailable
[    8.347902] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    8.349036]  sdb: sdb1
[    8.604514] sd 6:0:0:0: [sdb] Cache data unavailable
[    8.604520] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    8.604698] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   10.815521] ATOM BIOS: Dell/Compal
[   10.815688] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[   10.815692] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[   10.815694] [drm] Detected VRAM RAM=2048M, BAR=256M
[   10.815696] [drm] RAM width 128bits DDR
[   10.815909] [TTM] Zone  kernel: Available graphics memory: 4048280 kiB
[   10.815912] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   10.815914] [TTM] Initializing pool allocator
[   10.815920] [TTM] Initializing DMA pool allocator
[   10.815951] [drm] radeon: 2048M of VRAM memory ready
[   10.815953] [drm] radeon: 1024M of GTT memory ready.
[   10.850102] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_uvd.bin
[   10.850594] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   10.851731] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   10.851891] [drm] probing gen 2 caps for device 8086:151 = 261ac83/e
[   10.851896] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[   11.122406] sdb1: WRITE SAME failed. Manually zeroing.
[   12.112293] [drm] Loading VERDE Microcode
[   12.137406] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/VERDE_pfp.bin
[   12.144459] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/VERDE_me.bin
[   12.148709] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/VERDE_ce.bin
[   12.154639] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/VERDE_rlc.bin
[   12.155015] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/VERDE_mc.bin
[   12.166029] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/VERDE_smc.bin
[   12.167899] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[   12.168058] radeon 0000:01:00.0: WB enabled
[   12.168061] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8802530fec00
[   12.168063] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8802530fec04
[   12.168066] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8802530fec08
[   12.168068] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8802530fec0c
[   12.168069] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8802530fec10
[   12.168848] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900221b5a18
[   12.168851] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.168852] [drm] Driver supports precise vblank timestamp query.
[   12.168878] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[   12.168893] radeon 0000:01:00.0: radeon: using MSI.
[   12.168924] [drm] radeon: irq initialized.
[   12.727301] [drm] ring test on 0 succeeded in 1 usecs
[   12.727306] [drm] ring test on 1 succeeded in 1 usecs
[   12.727310] [drm] ring test on 2 succeeded in 1 usecs
[   12.727376] [drm] ring test on 3 succeeded in 4 usecs
[   12.727384] [drm] ring test on 4 succeeded in 1 usecs
[   12.913494] [drm] ring test on 5 succeeded in 2 usecs
[   12.913498] [drm] UVD initialized successfully.
[   12.914909] [drm] Enabling audio 0 support
[   12.914910] [drm] Enabling audio 1 support
[   12.914911] [drm] Enabling audio 2 support
[   12.914912] [drm] Enabling audio 3 support
[   12.914913] [drm] Enabling audio 4 support
[   12.914913] [drm] Enabling audio 5 support
[   12.914991] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.915014] [drm] ib test on ring 1 succeeded in 0 usecs
[   12.915050] [drm] ib test on ring 2 succeeded in 0 usecs
[   12.915089] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.915127] [drm] ib test on ring 4 succeeded in 1 usecs
[   13.067521] [drm] ib test on ring 5 succeeded
[   13.067723] [drm] Radeon Display Connectors
[   13.075792] [drm] Internal thermal controller without fan control
[   13.075865] [drm] radeon: power management initialized
[   13.076052] radeon 0000:01:00.0: No connectors reported connected with modes
[   13.076055] [drm] Cannot find any crtc or sizes - going 1024x768
[   13.077463] [drm] fb mappable at 0xA1488000
[   13.077464] [drm] vram apper at 0xA0000000
[   13.077464] [drm] size 3145728
[   13.077465] [drm] fb depth is 24
[   13.077466] [drm]    pitch is 4096
[   13.077591] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[   13.077605] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 1
[   13.887268] Adding 30738428k swap on /dev/sda2.  Priority:-1 extents:1 across:30738428k 
[   13.927052] EXT4-fs (sda3): re-mounted. Opts: (null)
[   14.329780] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   14.783128] device-mapper: uevent: version 1.0.3
[   14.783205] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[   15.402966] fuse init (API version 7.22)
[   15.447559] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.476313] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   16.410332] RPC: Registered named UNIX socket transport module.
[   16.410336] RPC: Registered udp transport module.
[   16.410338] RPC: Registered tcp transport module.
[   16.410339] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.454133] FS-Cache: Loaded
[   16.478646] FS-Cache: Netfs 'nfs' registered for caching
[   16.528973] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.829796] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[   26.305213] Guest personality initialized and is inactive
[   26.305332] VMCI host device registered (name=vmci, major=10, minor=57)
[   26.305334] Initialized host personality
[   26.365206] NET: Registered protocol family 40
[   28.062204] Bluetooth: RFCOMM TTY layer initialized
[   28.062224] Bluetooth: RFCOMM socket layer initialized
[   28.062236] Bluetooth: RFCOMM ver 1.11
[   28.176275] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   28.176279] Bluetooth: BNEP filters: protocol multicast
[   28.176296] Bluetooth: BNEP socket layer initialized
[   28.545118] lp: driver loaded but no devices found
[   28.572646] ppdev: user-space parallel port driver
[   32.288086] r8169 0000:07:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   32.416304] r8169 0000:07:00.0 eth0: link down
[   32.416346] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.417729] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[   32.425295] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[   32.668682] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[   32.676247] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[   32.731349] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.372241] wlan0: authenticate with c4:3d:c7:af:04:fd
[   34.378346] wlan0: send auth to c4:3d:c7:af:04:fd (try 1/3)
[   34.380443] wlan0: authenticated
[   34.383317] wlan0: associate with c4:3d:c7:af:04:fd (try 1/3)
[   34.386702] wlan0: RX AssocResp from c4:3d:c7:af:04:fd (capab=0x411 status=0 aid=2)
[   34.408138] wlan0: associated
[   34.408188] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   34.408238] cfg80211: Calling CRDA for country: US
[   34.411515] cfg80211: Regulatory domain changed to country: US
[   34.411518] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   34.411520] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   34.411522] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   34.411523] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.411524] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.411525] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.411527] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   34.411528] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   39.776484] systemd-logind[3449]: New seat seat0.
[   39.807056] systemd-logind[3449]: Watching system buttons on /dev/input/event4 (Power Button)
[   39.807151] systemd-logind[3449]: Watching system buttons on /dev/input/event12 (Video Bus)
[   39.807234] systemd-logind[3449]: Watching system buttons on /dev/input/event2 (Power Button)
[   39.807314] systemd-logind[3449]: Watching system buttons on /dev/input/event11 (Video Bus)
[   39.807390] systemd-logind[3449]: Watching system buttons on /dev/input/event3 (Lid Switch)
[   39.808437] systemd-logind[3449]: New session 1 of user Debian-gdm.
[   39.808594] systemd-logind[3449]: Linked /tmp/.X11-unix/X0 to /run/user/116/X11-display.
[   57.185421] systemd-logind[3449]: New session 2 of user andy.
[   57.185515] systemd-logind[3449]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[   80.371440] systemd-hostnamed[4126]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  137.707755] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[  137.721628] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[  138.345692] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[  138.381062] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.

@Pavlo faktycznie jak zrobię:

Kod:

sudo mount /dev/sdb1

to jest ok. Kurde cały cas myślałem, że czytnik mi się pojawia pod /dev/sdd i to mnie zmyliło...

Kod:

andy@nabuchodonozor:~$ sudo fdisk -l
[sudo] password for andy: 

Dysk /dev/sda: 1000.2 GB, bajtów: 1000204886016
głowic: 255, sektorów/ścieżkę: 63, cylindrów: 121601, w sumie sektorów: 1953525168
Jednostka = sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Identyfikator dysku: 0x84e13a93

Urządzenie Rozruch   Początek      Koniec   Bloków   ID  System
/dev/sda1   *        2048     1218559      608256   83  Linux
/dev/sda2         1218560    62695423    30738432   82  Linux swap / Solaris
/dev/sda3        62695424   179881983    58593280   83  Linux
/dev/sda4       179884030  1953523711   886819841    5  Rozszerzona
/dev/sda5       179884032  1953523711   886819840   83  Linux

Dysk /dev/sdb: 8068 MB, bajtów: 8068792320
głowic: 249, sektorów/ścieżkę: 36, cylindrów: 1758, w sumie sektorów: 15759360
Jednostka = sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Identyfikator dysku: 0x0002c262

Urządzenie Rozruch   Początek      Koniec   Bloków   ID  System
/dev/sdb1            8192    15759359     7875584   83  Linux

Tylko przy rozruchu montuje mi ładnie przez gnome-disk-utility, natomiast jak włożę to nie.

Ostatnio edytowany przez andy (2014-01-01 22:47:03)

Offline

 

#5  2014-01-02 21:25:00

  Graffi - Użytkownik

Graffi
Użytkownik
Skąd: Sulejówek
Zarejestrowany: 2005-10-03
Serwis

Re: Czytnik kart pamięci nie widzi kart po ich włożeniu

ja mam to samo (problem znaczy się) wbudowany czytnik w laptopa zamarł jakiś czas temu, ciuj wie kiedy w święta dopiero zobaczyłem że nie działa jak powinien jak chciałem zdjęcia zrzucić z aparatu, u mojej Wife natomiast działa ok. (bo jej laptop mniej jest aktualizowany i coś ma stare co działa tak jak działało u mnie gdy tego nie zaktualizowałem) tak więc jest coś źle gdzieś, ale poczekam aż:
1. albo się naprawi samo
2. albo ktoś wykmini co jest źle

póki co czytnik na USB też działający "jak chce" rozwiązuje problem tego wbudowanego ;)

aaa jak uruchamiam system z włożoną kartą to wszystko ok. ale jak potem kartę wyjmę / włożę to po włożeniu wszystko zachowuje się jakby nie działało

Offline

 

#6  2014-01-02 21:29:56

  andy - Użytkownik

andy
Użytkownik
Zarejestrowany: 2014-01-01

Re: Czytnik kart pamięci nie widzi kart po ich włożeniu

@Graffi tylko ja myślałem, że czytnik fizycznie nie jest widoczny w systemie - nie wiem dlaczego myślałem, że jest pod /dev/sdd...

Jeżeli chodzi o pokazywanie zawartości karty po włożeniu (automagiczne montowanie) to u mnie odpowiada za to gnomowe disk utility, które to jest taką nakładką na udisks.
Być może problem jest z samym udisks? Ręczne zamontowanie karty działa tj.

Kod:

sudo mount /dev/[b]sdb[/b]

Ostatnio edytowany przez andy (2014-01-02 21:32:26)

Offline

 

#7  2014-01-02 21:32:28

  Graffi - Użytkownik

Graffi
Użytkownik
Skąd: Sulejówek
Zarejestrowany: 2005-10-03
Serwis

Re: Czytnik kart pamięci nie widzi kart po ich włożeniu

ja stoję "po tamtej stronie barykady" i mam KDE
od jakiegoś czasu właśnie coś magicznie zamarło odnajdowanie nowych podpiętych / włożonych nośników, w tym też płyt w napędzie, muszę czymś "połaskotać" DVD żeby zobaczył że jest włożona płyta, bo inaczej po prostu zamykam napęd i jest zamknięty, nawet silnik nie raczy się pokręcić - cisza

ale poszperam w sprawie udisks a przynajmniej z Ani kompem porównam co i jak

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)

[ Generated in 0.017 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00019 SET CHARSET latin2
0.00006 SET NAMES latin2
0.00164 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.143.5.161' WHERE u.id=1
0.00125 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.143.5.161', 1732381503)
0.00053 SELECT * FROM punbb_online WHERE logged<1732381203
0.00173 SELECT topic_id FROM punbb_posts WHERE id=250043
0.00006 SELECT id FROM punbb_posts WHERE topic_id=24920 ORDER BY posted
0.00060 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24920 AND t.moved_to IS NULL
0.00011 SELECT search_for, replace_with FROM punbb_censoring
0.00686 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24920 ORDER BY p.id LIMIT 0,25
0.00128 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24920
Total query time: 0.01431 s