Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2007-10-10 19:59:59

  seneka - Użytkownik

seneka
Użytkownik
Skąd: Podkarpacie
Zarejestrowany: 2006-07-08

[SOLVED] Problem z Cdromem

Witam serdecznie. Przedwczoraj postanowilem skompilowac wlasnego kernela i mam maly problem poniewaz nie wykrywa mi cdromu. Mam dystrybucyjne jajko 2.6.18-5 i tam cdrom jest wykrywany jako /dev/hda Natomast po kompilacji nowego kernelka cdrom mi wyprowal. Poprzednio na starym sprzecie nie bylo takich problemow i cdrom sie pokazywal  , zas teraz na nowym niestety nie :/ Kompilowalem to jajko wczoraj chyba z 6razy i spasowalem :/ Prosze o jakies rady co moze byc tego powodem.

Oto moje /etc/fstab

Kod:

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/sda2       /               ext3    defaults,errors=remount-ro 0       1
/dev/sda5       none            swap    sw              0       0
/dev/hda        /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/sda1       /mnt/c          ntfs     users,noauto          0       0

DMESG

Kod:

seneka@leszek:~$ dmesg
zone: 223520 pages, LIFO batch:31
  HighMem zone: 2301 pages used for memmap
  HighMem zone: 292323 pages, LIFO batch:31
DMI 2.2 present.
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
Built 1 zonelists.  Total pages: 519907
Kernel command line: root=/dev/sda2 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2040.105 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074056k/2096000k available (2340k kernel code, 20824k reserved, 967k data, 136k init, 1178496k highmem)
virtual kernel memory layout:
    fixmap  : 0xffff0000 - 0xfffff000   (  60 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc043e000 - 0xc0460000   ( 136 kB)
      .data : 0xc03493ff - 0xc043b004   ( 967 kB)
      .text : 0xc0100000 - 0xc03493ff   (2340 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4083.04 BogoMIPS (lpj=8166083)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
CPU: After all inits, caps: afebfbff 20100000 00000000 00003940 0000e31d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Celeron(R) CPU          440  @ 2.00GHz stepping 01
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xfa140, last bus=7
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI: Setting latency timer of device 0000:07:02.0 to 64
Time: tsc clocksource has been installed.
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[fd7ff000-fd7ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:01.0
  IO window: 8000-8fff
  MEM window: fa000000-fcffffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 7000-7fff
  MEM window: fd800000-fd8fffff
  PREFETCH window: fd500000-fd5fffff
PCI: Bridge: 0000:00:1c.2
  IO window: d000-dfff
  MEM window: fd400000-fd4fffff
  PREFETCH window: fd300000-fd3fffff
PCI: Bridge: 0000:00:1c.3
  IO window: b000-bfff
  MEM window: fde00000-fdefffff
  PREFETCH window: fdd00000-fddfffff
PCI: Bridge: 0000:00:1c.4
  IO window: a000-afff
  MEM window: fdc00000-fdcfffff
  PREFETCH window: fdb00000-fdbfffff
PCI: Bridge: 0000:00:1c.5
  IO window: 9000-9fff
  MEM window: fda00000-fdafffff
  PREFETCH window: fd900000-fd9fffff
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: fd700000-fd7fffff
  PREFETCH window: fd600000-fd6fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
highmem bounce pool size: 64 pages
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: HPC vendor_id 8086 device_id 283f ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
pciehp: HPC vendor_id 8086 device_id 2843 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
pciehp: HPC vendor_id 8086 device_id 2845 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
pciehp: HPC vendor_id 8086 device_id 2847 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.4:pcie02
pciehp: HPC vendor_id 8086 device_id 2849 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.5:pcie02
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ahci 0000:00:1f.2: version 2.2
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00508d0000920c82]
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 cmd 0xf8802100 ctl 0x00000000 bmdma 0x00000000 irq 11
ata2: SATA max UDMA/133 cmd 0xf8802180 ctl 0x00000000 bmdma 0x00000000 irq 11
ata3: SATA max UDMA/133 cmd 0xf8802200 ctl 0x00000000 bmdma 0x00000000 irq 11
ata4: SATA max UDMA/133 cmd 0xf8802280 ctl 0x00000000 bmdma 0x00000000 irq 11
ata5: SATA max UDMA/133 cmd 0xf8802300 ctl 0x00000000 bmdma 0x00000000 irq 11
ata6: SATA max UDMA/133 cmd 0xf8802380 ctl 0x00000000 bmdma 0x00000000 irq 11
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133
ata1.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      ST3400620AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:06:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 cmd 0xf8804100 ctl 0x00000000 bmdma 0x00000000 irq 10
ata8: SATA max UDMA/133 cmd 0xf8804180 ctl 0x00000000 bmdma 0x00000000 irq 10
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
sata_sil24 0000:04:00.0: version 0.9
PCI: Setting latency timer of device 0000:04:00.0 to 64
scsi8 : sata_sil24
scsi9 : sata_sil24
ata9: SATA max UDMA/100 cmd 0xf8810000 ctl 0x00000000 bmdma 0x00000000 irq 11
ata10: SATA max UDMA/100 cmd 0xf8812000 ctl 0x00000000 bmdma 0x00000000 irq 11
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
usbmon: debugfs is not available
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 7, io mem 0xfdfff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xfdffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 5, io base 0x0000ff00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 11, io base 0x0000fe00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000fd00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000fc00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 7, io base 0x0000fb00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #2 chosen from 2 choices
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver belkin
drivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
[ueagle-atm] driver ueagle 1.4 loaded
usbcore: registered new interface driver ueagle-atm
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
ALSA device list:
  #0: HDA Intel at 0xfdff4000 irq 4
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 136k freed
r8169 Gigabit Ethernet driver 2.2LK loaded
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: RTL8168b/8111b at 0xf8816000, 00:50:8d:94:04:26, IRQ 7
r8169 Gigabit Ethernet driver 2.2LK loaded
PCI: Setting latency timer of device 0000:05:00.0 to 64
eth1: RTL8168b/8111b at 0xf881e000, 00:50:8d:94:04:27, IRQ 5
eth0: register 'cdc_ether' at usb-0000:00:1d.0-1, CDC Ethernet Device, 00:19:e0:f3:b3:2c
usbcore: registered new interface driver cdc_ether
Adding 2658716k swap on /dev/sda5.  Priority:-1 extents:1 across:2658716k
EXT3 FS on sda2, internal journal
loop: module loaded
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
NTFS driver 2.1.28 [Flags: R/W MODULE].
lp: driver loaded but no devices found
r8169: eth2: link up
r8169: eth2: link up
r8169: eth1: link down
nvidia: module license 'NVIDIA' taints kernel.
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth2: no IPv6 routers present
eth3: no IPv6 routers present

i moj CONFIG jajka , moze ktos zerknie i znajdzie cos co powinno byc dodane badz wyrzucone....


Kod:

Config Kernela
http://s001.wyslijto.pl/index.php?file_id=78341524811600315496
It's one of those days when everything is fucked , everybody sux ...

Offline

 

#2  2007-10-11 02:59:29

  terefere - Członek DUG

terefere
Członek DUG
Zarejestrowany: 2005-09-16
Serwis

Re: [SOLVED] Problem z Cdromem

albo mi się zdaje albo taki topic już był...

/dev/hda        /media/cdrom0   udf,iso9660 user,noauto     0       0 [/quote]
W powyższej linijce jest mała literówka

Nigdy się niektórych rzeczy nie dowiesz, jeśli na niektóre pytania samemu sobie nie odpowiesz - STFW

Offline

 

#3  2007-10-11 14:47:30

  seneka - Użytkownik

seneka
Użytkownik
Skąd: Podkarpacie
Zarejestrowany: 2006-07-08

Re: [SOLVED] Problem z Cdromem

TGR , wynik fdisk -l daje

Kod:


Disk /dev/sda: 400.0 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        5149    41359311    7  HPFS/NTFS
/dev/sda2            5150       48310   346690732+  83  Linux
/dev/sda3           48311       48641     2658757+   5  Extended
/dev/sda5           48311       48641     2658726   82  Linux swap / Solaris

@terefere , Nie jestem przekonany czy tam jest literowka , jesli jest to cdrom nie powinien byc wykrywany w taki razie takze na kernelu dystrybucyjnym , czyli 2.6.18-5, a tak sie nie dzieje. Problem dotyczy tylko 2.6.22 :/

It's one of those days when everything is fucked , everybody sux ...

Offline

 

#4  2007-10-12 12:07:23

  rychu - elektryk dyżurny

rychu
elektryk dyżurny
Skąd: gdańsk
Zarejestrowany: 2004-12-28

Re: [SOLVED] Problem z Cdromem

postanowilem skompilowac wlasnego kernela i mam maly problem poniewaz nie wykrywa mi cdromu.[/quote]
imo chodzi raczej o to, że nie dodałeś do jajca sterów do cdromu. sprawdź czy masz:

Kod:

Device drivers -->
<*> ATA/ATAPI/MFM/RLL support  --->                                                            
   <*> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
   <*> Include IDE/ATAPI CDROM support
   <*> generic/default IDE chipset support                                                   
         [*] PCI IDE chipset support                 
         [*] Sharing PCI IDE interrupts support 
   <*> Generic PCI IDE Chipset Support
         [*] Generic PCI bus-master DMA support
         <*> tu_wybierz_ster_do_swego_chipsetu
linux regd. user #248790

Offline

 

#5  2007-10-13 18:59:07

  seneka - Użytkownik

seneka
Użytkownik
Skąd: Podkarpacie
Zarejestrowany: 2006-07-08

Re: [SOLVED] Problem z Cdromem

No @Rychu byl najblizej :)
Trzeba bylo wkompilowac sterownik jmb361 i ruszylo :)
Dzieki chlopaki. Pozdrawiam.

PROBLEM ROZWIAZANY

It's one of those days when everything is fucked , everybody sux ...

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)

[ Generated in 0.010 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00015 SET CHARSET latin2
0.00007 SET NAMES latin2
0.00128 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.137.184.102' WHERE u.id=1
0.00079 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.137.184.102', 1727630903)
0.00039 SELECT * FROM punbb_online WHERE logged<1727630603
0.00045 SELECT topic_id FROM punbb_posts WHERE id=72783
0.00128 SELECT id FROM punbb_posts WHERE topic_id=9370 ORDER BY posted
0.00084 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=9370 AND t.moved_to IS NULL
0.00006 SELECT search_for, replace_with FROM punbb_censoring
0.00139 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=9370 ORDER BY p.id LIMIT 0,25
0.00078 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=9370
Total query time: 0.00748 s