Forum Debian Users Gang

# Defaults for dhcp initscript
# sourced by /etc/init.d/dhcp
# installed at /etc/default/dhcp by the maintainer scripts

#
# This is a POSIX shell fragment
#

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
#    Separate multiple interfaces with spaces, e.g. "eth0 eth1".
INTERFACES="eth1"

#!/bin/sh
#
# $Id: dhcp.init.d,v 1.3.2.2 2002/08/11 22:11:54 peloy Exp $
#

test -x /usr/sbin/dhcpd || exit 0

# Defaults
INTERFACES="eth0"

# Reads config file (will override defaults above)
[ -r /etc/default/dhcp ] && . /etc/default/dhcp

DHCPDPID=/var/run/dhcpd.pid

case "$1" in
    start)
        echo -n "Starting DHCP server: "
        start-stop-daemon --start --quiet --pidfile $DHCPDPID \
            --exec /usr/sbin/dhcpd -- -q $INTERFACES
        sleep 2

        if [ -f "$DHCPDPID" ] && ps h `cat "$DHCPDPID"` >/dev/null; then
            echo "dhcpd."
        else
            echo "dhcpd failed to start - check syslog for diagnostics."
        fi
        ;;
    stop)
        echo -n "Stopping DHCP server: dhcp"
        start-stop-daemon --stop --quiet --pidfile $DHCPDPID
        echo "."
        ;;
    restart | force-reload)
        $0 stop
        sleep 2
        $0 start
        ;;
    *)
        echo "Usage: /etc/init.d/dhcp {start|stop|restart|force-reload}"
        exit 1 
esac

exit 0

killall -9 dhcpcd
/etc/init.d/networking restart
/etc/init.d/dhcp start

killall -9 dhcpcd
/etc/init.d/networking restart
/etc/init.d/dhcp start

#
# Sample configuration file for ISC dhcpd for Debian
#
# $Id: dhcpd.conf,v 1.4.2.2 2002/07/10 03:50:33 peloy Exp $
#

# option definitions common to all supported networks...
option domain-name "fugue.com";
option domain-name-servers toccata.fugue.com;

option subnet-mask 255.255.255.0;
default-lease-time 600;
max-lease-time 7200;

#subnet 192.168.1.0 netmask 255.255.255.0 {
#range 192.168.1.100 204.254.239.20;
#  option broadcast-address 204.254.239.31;
#  option routers prelude.fugue.com;
#}


# The other subnet that shares this physical network
#subnet 204.254.239.32 netmask 255.255.255.224 {
#  range dynamic-bootp 204.254.239.10 204.254.239.20;
#  option broadcast-address 204.254.239.31;
#  option routers snarg.fugue.com;
#}

subnet 192.168.1.0 netmask 255.255.255.0 {
#  range 192.5.5.26 192.5.5.30;
#  option name-servers bb.home.vix.com, gw.home.vix.com;
option domain-name "194.204.159.1 192.204.152.34";
option routers 192.168.1.1;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
default-lease-time 600;
max-lease-time 7200;
}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address fantasia.fugue.com;
#}

# If a DHCP or BOOTP client is mobile and might be connected to a variety
# of networks, more than one fixed address for that host can be specified.
# Hosts can have fixed addresses on some networks, but receive dynamically
# allocated address on other subnets; in order to support this, a host
# declaration for that client must be given which does not have a fixed
# address.   If a client should get different parameters depending on
# what subnet it boots on, host declarations for each such network should
# be given.   Finally, if a domain name is given for a host's fixed address
# and that domain name evaluates to more than one address, the address
# corresponding to the network to which the client is attached, if any,
# will be assigned.
#host confusia {
#  hardware ethernet 02:03:04:05:06:07;
#  fixed-address confusia-1.fugue.com, confusia-2.fugue.com;
#  filename "vmunix.confusia";
#  server-name "toccata.fugue.com";
#}

#host confusia {
#  hardware ethernet 02:03:04:05:06:07;
#  fixed-address confusia-3.fugue.com;
#  filename "vmunix.confusia";
#  server-name "snarg.fugue.com";
#}

#host confusia {
#  hardware ethernet 02:03:04:05:06:07;
#  filename "vmunix.confusia";
#  server-name "bb.home.vix.com";
#}