Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2011-03-12 11:06:58

  torrentow - Członek Sejmowej Komisji Śledczej

torrentow
Członek Sejmowej Komisji Śledczej
Skąd: z GNU
Zarejestrowany: 2009-11-23

[GENTOO] glibc

Witajcie Towarzysze!
Ja też mam mały problemik:

Kod:

>>> Emerging (1 of 33) sys-libs/glibc-2.13-r1
 * glibc-2.13.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...                    [ ok ]
 * glibc-ports-2.12.1.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...            [ ok ]
 * glibc-2.13-patches-2.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...          [ ok ]
 * Package:    sys-libs/glibc-2.13-r1
 * Repository: gentoo
 * Maintainer: toolchain@gentoo.org
 * USE:        elibc_glibc kernel_linux nls userland_GNU x86
 * FEATURES:   sandbox
 * Sanity check to keep you from breaking your system:
 *  Downgrading glibc is not supported and a sure way to destruction
 * ERROR: sys-libs/glibc-2.13-r1 failed (setup phase):
 *   aborting to save your system
 * 
 * Call stack:
 *              ebuild.sh, line  56:  Called pkg_setup
 *   glibc-2.13-r1.ebuild, line 189:  Called eblit-run 'pkg_setup'
 *   glibc-2.13-r1.ebuild, line 170:  Called eblit-glibc-pkg_setup
 *        pkg_setup.eblit, line  12:  Called die
 * The specific snippet of code:
 *               die "aborting to save your system"
 * 
 * If you need support, post the output of 'emerge --info =sys-libs/glibc-2.13-r1',
 * the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.13-r1'.
 * The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.13-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.13-r1/temp/die.env'.
 * S: '/var/tmp/portage/sys-libs/glibc-2.13-r1/work/glibc-2.13'

>>> Failed to emerge sys-libs/glibc-2.13-r1, Log file:

>>>  '/var/tmp/portage/sys-libs/glibc-2.13-r1/temp/build.log'

 * Messages for package sys-libs/glibc-2.13-r1:

 * Sanity check to keep you from breaking your system:
 *  Downgrading glibc is not supported and a sure way to destruction
 * ERROR: sys-libs/glibc-2.13-r1 failed (setup phase):
 *   aborting to save your system
 * 
 * Call stack:
 *              ebuild.sh, line  56:  Called pkg_setup
 *   glibc-2.13-r1.ebuild, line 189:  Called eblit-run 'pkg_setup'
 *   glibc-2.13-r1.ebuild, line 170:  Called eblit-glibc-pkg_setup
 *        pkg_setup.eblit, line  12:  Called die
 * The specific snippet of code:
 *               die "aborting to save your system"
 * 
 * If you need support, post the output of 'emerge --info =sys-libs/glibc-2.13-r1',
 * the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.13-r1'.
 * The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.13-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.13-r1/temp/die.env'.
 * S: '/var/tmp/portage/sys-libs/glibc-2.13-r1/work/glibc-2.13'

Kod:

krasnaja_plosciac torrentow # emerge --info
Portage 2.1.9.42 (default/linux/x86/10.0, gcc-4.5.2, glibc-2.13-r2, 2.6.37.2 i686)
=================================================================
System uname: Linux-2.6.37.2-i686-AMD_Processor_model_-with-gentoo-2.0.1
Timestamp of tree: Sat, 05 Mar 2011 10:00:01 +0000
app-shells/bash:     4.2_p7
dev-java/java-config: 2.1.11-r3
dev-lang/python:     2.7.1-r1, 3.1.3-r1
dev-util/cmake:      2.8.4
sys-apps/baselayout: 2.0.1-r1
sys-apps/openrc:     0.7.0
sys-apps/sandbox:    2.5
sys-devel/autoconf:  2.13, 2.68
sys-devel/automake:  1.10.3, 1.11.1
sys-devel/binutils:  2.21
sys-devel/gcc:       4.5.2
sys-devel/gcc-config: 1.4.1
sys-devel/libtool:   2.4-r1
sys-devel/make:      3.82
virtual/os-headers:  2.6.36.1 (sys-kernel/linux-headers)
ACCEPT_KEYWORDS="x86 ~x86"
ACCEPT_LICENSE="*"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -msse3 -O2 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/openvpn/easy-rsa"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=athlon-xp -msse3 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS=""
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="pl_PL.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="pl"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/var/lib/layman/bgo-overlay /var/lib/layman/calculate /var/lib/layman/roslin /usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X acl berkdb bzip2 cli cracklib crypt cups cxx dbus dri fortran gdbm gnome gpm gtk hal iconv ipv6 modules mudflap ncurses nls nptl nptlonly opengl openmp pam pcre perl pppd python readline session ssl sysfs tcpd unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="pl" PHP_TARGETS="php5-3" QEMU_SOFTMMU_TARGETS="arm cris i386 m68k microblaze mips mips64 mips64el mipsel ppc ppc64 ppcemb sh4 sh4eb sparc sparc64 x86_64" QEMU_USER_TARGETS="alpha arm armeb cris i386 m68k microblaze mips mipsel ppc ppc64 ppc64abi32 sh4 sh4eb sparc sparc32plus sparc64 x86_64" RUBY_TARGETS="ruby18" SANE_BACKENDS="abaton agfafocus apple artec artec_eplus48u as6e avision bh canon canon630u canon_dr canon_pp cardscan coolscan coolscan2 coolscan3 dc210 dc240 dc25 dell1600n_net dmc epjitsu epson epson2 fujitsu genesys gt68xx hp hp3500 hp3900 hp4200 hp5400 hp5590 hpljm1005 hpsj5s hs2p ibm kodak kvs1025 leo lexmark ma1509 matsushita microtek microtek2 mustek mustek_pp mustek_usb nec net niash p5 pie pixma plustek plustek_pp qcam ricoh rts8891 s9036 sceptre sharp sm3600 sm3840 snapscan sp15c st400 stv680 tamarack teco1 teco2 teco3 test u12 umax umax1220u umax_pp xerox_mfp" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" 
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, MAKEOPTS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

Każdy sam sobie szkodzi :)
[img]http://img715.imageshack.us/img715/7104/apt.png[/img]

Offline

 

#2  2011-03-12 11:28:32

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: [GENTOO] glibc

Kod:

* Sanity check to keep you from breaking your system:
 *  Downgrading glibc is not supported and a sure way to destruction
 * ERROR: sys-libs/glibc-2.13-r1 failed (setup phase):
 *   aborting to save your system

Kod:

Portage 2.1.9.42 (default/linux/x86/10.0, gcc-4.5.2, glibc-2.13-r2, 2.6.37.2 i686)

To normalne zachowanie... Po co próbujesz cofnąć [i]glibc[/i] z wersji [i]2.13-r2[/i] do [i]2.13-r1[/i]?


[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

 

#3  2011-03-12 11:40:28

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: [GENTOO] glibc

Nie wiem, gdzie Ty tu towarzyszy widzisz, ja widzę chyba wyłącznie Homo Sapiens ;)

Jakbyś koniecznie potrzebował cofać glibc - to tu jest przepis:
http://forums.gentoo.org/viewtopic-t-845000.html

To by było na tyle
;-)

Ostatnio edytowany przez Jacekalex (2011-03-12 13:39:38)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#4  2011-03-12 12:15:03

  torrentow - Członek Sejmowej Komisji Śledczej

torrentow
Członek Sejmowej Komisji Śledczej
Skąd: z GNU
Zarejestrowany: 2009-11-23

Re: [GENTOO] glibc

Towarzyszu [b]ArnVaker[/b]!
Dzisiaj emerge -DuN world chciał sam to zrobić nie wiem dlaczego :<


Każdy sam sobie szkodzi :)
[img]http://img715.imageshack.us/img715/7104/apt.png[/img]

Offline

 

#5  2011-03-12 12:30:08

  ZiomekPL - Członek DUG

ZiomekPL
Członek DUG
Zarejestrowany: 2009-12-18

Re: [GENTOO] glibc

moze daj emerge --sync ;-)
ogolnie to zmiana z wersji jest tutaj na poziomie kosmetycznym, czyli systemu ci takie cofniecie nie ruszy
jednym slowem mozesz olac to ;]


Gentoo! user

Offline

 

#6  2011-03-12 12:51:20

  torrentow - Członek Sejmowej Komisji Śledczej

torrentow
Członek Sejmowej Komisji Śledczej
Skąd: z GNU
Zarejestrowany: 2009-11-23

Re: [GENTOO] glibc

[b]ZiomekPL[/b] po syncu tak mi chciał zrobić.

Ostatnio edytowany przez torrentow (2011-03-12 12:52:29)


Każdy sam sobie szkodzi :)
[img]http://img715.imageshack.us/img715/7104/apt.png[/img]

Offline

 

#7  2011-03-12 13:05:40

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: [GENTOO] glibc

[i]changelog[/i]: http://gentoo-portage.com/sys-libs/glibc/ChangeLog#ptabs

*glibc-2.13-r2 (11 Mar 2011)
*glibc-2.13-r1 (14 Feb 2011)[/quote]
Twoje portage:

Kod:

Timestamp of tree: Sat, 05 Mar 2011 10:00:01 +0000

Wygląda jakbyś zsynchronizował z jakimś zacofanym mirrorem. ;)


[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

 

#8  2011-03-12 13:12:53

  ZiomekPL - Członek DUG

ZiomekPL
Członek DUG
Zarejestrowany: 2009-12-18

Re: [GENTOO] glibc

tylko, ze portage nie syncuje sie z starszym mirrorem :P
trzeba by wymusic to poprzez wykasowanie timestampa


Gentoo! user

Offline

 

#9  2011-03-12 13:15:27

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: [GENTOO] glibc

Jakby nie patrzeć ma drzewo portage z 05 Mar 2011 i to się nawet zgadza z problemem. Jakoś to zrobił... :D


[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

 

#10  2011-03-12 14:15:36

  torrentow - Członek Sejmowej Komisji Śledczej

torrentow
Członek Sejmowej Komisji Śledczej
Skąd: z GNU
Zarejestrowany: 2009-11-23

Re: [GENTOO] glibc

/etc/make.conf

Kod:

torrentow@krasnaja_plosciac ~ $ cat /etc/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -msse3 -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
MAKE_OPTS="-j3"
ACCEPT_KEYWORDS="~x86"
USE="X gnome hal dbus gtk opengl"
INPUT_DEVICES="keyboard mouse synaptics"
ACCEPT_LICENSE="*"
LINGUAS="pl"
source /var/lib/layman/make.conf
PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /usr/local/portage/"
QEMU_SOFTMMU_TARGETS="arm cris i386 m68k microblaze mips mips64 mips64el mipsel ppc ppc64 ppcemb sh4 sh4eb sparc sparc64 x86_64" 
QEMU_USER_TARGETS="alpha arm armeb cris i386 m68k microblaze mips mipsel ppc ppc64 ppc64abi32 sh4 sh4eb sparc sparc32plus sparc64 x86_64"
SANE_BACKENDS="abaton agfafocus apple artec artec_eplus48u as6e avision bh canon canon630u canon_dr canon_pp cardscan coolscan coolscan2 coolscan3 dc210 dc240 dc25 dell1600n_net dmc epjitsu epson epson2 fujitsu genesys gt68xx hp hp3500 hp3900 hp4200 hp5400 hp5590 hpljm1005 hpsj5s hs2p ibm kodak kvs1025 leo lexmark ma1509 matsushita microtek microtek2 mustek mustek_pp mustek_usb nec net niash p5 pie pixma plustek plustek_pp qcam ricoh rts8891 s9036 sceptre sharp sm3600 sm3840 snapscan sp15c st400 stv680 tamarack teco1 teco2 teco3 test u12 umax umax1220u umax_pp xerox_mfp"

Nie wiem co się ostatnio z mirrorami gentoo dzieje. :<


Każdy sam sobie szkodzi :)
[img]http://img715.imageshack.us/img715/7104/apt.png[/img]

Offline

 

#11  2011-03-12 14:20:43

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: [GENTOO] glibc

Po co ten [i]make.conf[/i]? Zsynchronizuj po prostu i powinno być gut. :)

BTW: http://forum.dug.net.pl/viewtopic.php?id=16522


[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

 

#12  2011-03-12 14:21:21

  lis6502 - Łowca lamerów

lis6502
Łowca lamerów
Skąd: Stalinogród
Zarejestrowany: 2008-12-04

Re: [GENTOO] glibc

dlatego nie ma to jak zassać całe distfiles na localhosta i update'ować raz na dwa miesiące :)

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.011 seconds, 9 queries executed ]

Informacje debugowania

Time (s) Query
0.00009 SET CHARSET latin2
0.00008 SET NAMES latin2
0.00073 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.14.132.178' WHERE u.id=1
0.00107 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.14.132.178', 1732215822)
0.00050 SELECT * FROM punbb_online WHERE logged<1732215522
0.00070 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=18527 AND t.moved_to IS NULL
0.00045 SELECT search_for, replace_with FROM punbb_censoring
0.00251 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=18527 ORDER BY p.id LIMIT 0,25
0.00266 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=18527
Total query time: 0.00879 s