Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2012-02-01 18:26:41
Pablik - 
Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Klawisze funkcyjne i touchpad w jajku
Witam, posiadam acer aspire one 532h-2256 i chciałbym się dowiedzieć czy jest możliwość tak skonfigurować jajko zeby działały klawisze funkcyjne , bo wiem że touchad mi działał (tzn teraz działa ale nie działa np ten suwak co jest zawsze na prawym boku touchpad'a)
Dodałem wszystkie(chyba) ustawienia związane z klawiaturą i myszką jako moduł, ale wciąż nie działają
Kod:
Device Drivers --->
Input device support --->
-*- Generic input layer (needed for keyboard, mouse, ...)
-*- Keyboards --->
│ │ --- Keyboards │ │
│ │ <M> ADP5588/87 I2C QWERTY Keypad and IO Expander │ │
│ │ <M> ADP5589 I2C QWERTY Keypad and IO Expander │ │
│ │ <M> Atmel AT42QT1070 Touch Sensor Chip │ │
│ │ <M> Atmel AT42QT2160 Touch Sensor Chip │ │
│ │ <M> DECstation/VAXstation LK201/LK401 keyboard │ │
│ │ <M> TCA6416/TCA6408A Keypad Support │ │
│ │ <M> LM8323 keypad chip │ │
│ │ <M> Maxim MAX7359 Key Switch Controller │ │
│ │ <M> MELFAS MCS Touchkey │ │
│ │ <M> Newton keyboard │ │
│ │ <M> OpenCores Keyboard Controller │ │
│ │ <M> Stowaway keyboard │ │
│ │ <M> Sun Type 4 and Type 5 keyboard │ │
│ │ <M> XT keyboard │ │
│ │ --- Mice │ │
│ │ <M> PS/2 mouse │ │
│ │ [*] Elantech PS/2 protocol extension │ │
│ │ [*] Sentelic Finger Sensing Pad PS/2 protocol extension │ │
│ │ [*] eGalax TouchKit PS/2 protocol extension │ │
│ │ <M> Serial mouse │ │
│ │ <M> Apple USB Touchpad support │ │
│ │ <M> Apple USB BCM5974 Multitouch trackpad support │ │
│ │ <M> InPort/MS/ATIXL busmouse │ │
│ │ [*] ATI XL variant │ │
│ │ <M> Logitech busmouse │ │
│ │ <M> IBM PC110 touchpad │ │
│ │ <M> DEC VSXXX-AA/GA mouse and VSXXX-AB tablet │ │
│ │ <M> Synaptics I2C Touchpad support │Offline
#2 2012-02-01 20:10:44
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Klawisze funkcyjne i touchpad w jajku
To nie tu! Znajdz coś dla siebie w tym:
Kod:
CONFIG_X86_PLATFORM_DEVICES:
Ostatnio edytowany przez P@blo (2012-02-01 20:11:25)
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#3 2012-02-01 20:22:01
NIC - Członek DUG
Re: Klawisze funkcyjne i touchpad w jajku
He he... To jest dokładnie to co robimy w temacie: http://forum.dug.net.pl/viewtopic.php?id=20557
Czytaj to o acer-wmi. To jest właśnie ten moduł. W nim szkopuł.
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#4 2012-02-01 20:24:43
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Klawisze funkcyjne i touchpad w jajku
No nazwa wątku nie za bardzo adekwatna do tego co tam robicie :D
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#5 2012-02-01 21:27:26
rychu - elektryk dyżurny
- rychu
- elektryk dyżurny
- Skąd: gdańsk
- Zarejestrowany: 2004-12-28
Re: Klawisze funkcyjne i touchpad w jajku
rozwiązanie w ubuntu - ustawić protokół na imps
http://ub-os.blogspot.com/2010/05/fix-for-acer-532h-touchpad-and.html
linux regd. user #248790
Offline
#6 2012-02-01 22:11:15
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
[quote=rychu]rozwiązanie w ubuntu - ustawić protokół na imps
http://ub-os.blogspot.com/2010/05/fix-for-acer-532h-touchpad-and.html[/quote]
zgodnie z tym tutem trzeba edytować plik "/etc/modprobe.d/psmouse.conf" a ja go nie mam:
Kod:
cd /etc/modprobe.d/ aliases.conf fbdev-blacklist.conf alsa-base-blacklist.conf i915-kms.conf alsa-base.conf linux-sound-base_noOSS.conf blacklist.conf radeon-kms.conf
sorki nie doczytałem ze jak niema to trzeba stworzyć ;)
Ostatnio edytowany przez Pablik (2012-02-01 22:11:58)
Offline
#7 2012-02-01 23:43:05
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
Coś u mnie to nie działa ;(
utworzyłem plik /etc/modprobe.d/psmouse.conf, dodałem uprawnienia chmod 777, dodałem wpis options psmouse proto=imps i przewaliłem kompa i nic ;(
Offline
#8 2012-02-02 03:49:13
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Klawisze funkcyjne i touchpad w jajku
dodałem uprawnienia chmod 777[/quote]
powinny być 644, 640 lub 600.
W każdym razie takie, gdzie tylko i wyłącznie root ma prawo zapisu.
Poza tym po co atrytut wykonalności na pliku konfiguracyjnym?
RTFM:Kod:
man chmod[url]http://pl.wikipedia.org/wiki/Chmod[/url]
To by było na tyle
;-)Ostatnio edytowany przez Jacekalex (2012-02-11 23:13:26)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#9 2012-02-02 11:10:00
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Klawisze funkcyjne i touchpad w jajku
http://pl.wikipedia.org/wiki/RTFM
Jakby ktoś nie wiedział xD
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#10 2012-02-02 11:39:21
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
[quote=Jacekalex]
Kod:
dodałem uprawnienia chmod 777
powinny być 644, 640 lub 600.
W każdym razie takie, gdzie tylko i wyłącznie root ma prawo zapisu.
Poza tym po co atrytut wykonalności na pliku konfiguracyjnym?
RTFM:
Kod:
man chmod
[url]http://pl.wikipedia.org/wiki/Chmod[/url]
To by było na tyle
;-)[/quote]
Czepiliście się uprawnień jak by to miało jakieś znaczenia, próbowałem chmod 644, potem 640 i 600 , po każdym przewaliłem system i dalej ten scroollock na touchpad'zie nie działa (przecież plik który jest tylko odczytywany w celu pobrania ustawień, chodz by miał chmod 777 to nic nie zmienia dalej można pobierać te ustawienia z tego pliku)
Ostatnio edytowany przez Pablik (2012-02-02 11:42:43)
Offline
#11 2012-02-02 11:48:51
rychu - elektryk dyżurny
- rychu
- elektryk dyżurny
- Skąd: gdańsk
- Zarejestrowany: 2004-12-28
Re: Klawisze funkcyjne i touchpad w jajku
a masz tą mysz jako moduł w ogóle? co dmesg wywala? przeładuj ten moduł i zobacz czy coś się pojawia w logach
linux regd. user #248790
Offline
#12 2012-02-02 12:10:14
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
tak, po przeładowaniu w logach pojawia się takie coś :
Kod:
[ 2009.317279] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
Offline
#13 2012-02-02 15:23:50
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Klawisze funkcyjne i touchpad w jajku
[quote=/me]To nie tu! Znajdz coś dla siebie w tym:
Kod:
CONFIG_X86_PLATFORM_DEVICES:
[/quote]
No a tam nic nie znalazłeś dla siebie? Jest tam dla asus'a... Włącz najlepiej wszystkie jako M i zobacz co zatrybi... Nie rozumiem, czemu tam ma to nie zadziałać...
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#14 2012-02-02 18:08:19
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
Kod:
Device Drivers
X86 Platform Specific Device DriversWszystko tu dodałem jako moduł i nic ;(
mam listę modułów które były aktywne jak scrollbar jeszcze działała, może będziecie wiedzieć o który chodzi:
znaki zapytania możecie pominąć
Kod:
Modules Loaded ? aes_i586 ? aes_generic acpi_cpufreq parport parport_pc ?cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_userspace ppdev ?lp bridge sco stp bnep l2cap crc16 ?bluetooth binfmt_misc uinput fuse ?loop snd_hda_codec_realtek arc4 ecb snd_hda_intel joydev ath9k ?snd_hda_codec i915 snd_hwdep mac80211 drm_kms_helper snd_pcm ?snd_seq ?ath ?uvcvideo snd_timer drm ?snd_seq_device videodev ?v4l1_compat cfg80211 rfkill i2c_algo_bit i2c_i801 ?snd ?soundcore ?psmouse ?ac ?video ?snd_page_alloc serio_raw pcspkr led_class evdev ?i2c_core ?battery ?output wmi button ?processor ext3 jbd mbcache ?sd_mod crc_t10dif usb_storage fan ahci ?libata thermal uhci_hcd ehci_hcd scsi_mod ?thermal_sys atl1c ?usbcore ?nls_base
Ostatnio edytowany przez Pablik (2012-02-02 18:12:33)
Offline
#15 2012-02-10 11:50:01
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
Wątek staną ale odkryłem coś nowego, mam nadzieje że pomoże w diagnozie ;)
To tak ten config co go używam to jest seed's config do jajka 3.0.18.
Zauważyłem że scrollbar działa normalnie na jajku 2.6.32 więc pobrałem źródło 2.6.32 i skompilowałem je na configu tym co cały czas się z nim męczymy tzn. 3.0.18 . O dziwo wstał pięknie i na dodatek działa scrollbar, sterowników do niektórego sprzętu nie było bo moduły były w innych miejscach, tylko1 sterownika mi brak w tym jajku , do czytnika kard SD (CONFIG_USB_STORAGE_ENE_UB6250) niema go tam jeszcze (jak nie wypali działanie scrollbara na 3.0.18 to będę się męczył z przeniesieniem tego modułu do 2.6.32) .
Więc tak działa na tym samym configu w 2.6.32 nie działa na 3.0.18 wiec myślę że to może być wina psmouse, trzeba je tylko podmienić , możecie podpowiedzieć które to pliki ??
I jeszcze jedna rzecz, ja montowałem sprzęt na sztywno więc:
lsmod
Kod:
Module Size Used by fuse 54540 3
jeśli podmiana nie pomoże to trzeba będzie znaleźć jaki moduł trzeba dodać do 3.0.18
Lista modułów:
jajko 2.6 - tu działa scrollbar
cat config-2.6.32.56 | grep =y
Kod:
CONFIG_X86_32=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_X86_32_LAZY_GS=y CONFIG_KTIME_SCALAR=y CONFIG_CONSTRUCTORS=y CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_TREE_PREEMPT_RCU=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_NAMESPACES=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_EVENTS=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_SLOW_WORK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y CONFIG_TICK_ONESHOT=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_MPPARSE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_MATOM=y CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_VM86=y CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_HIGHMEM4G=y CONFIG_HIGHMEM=y CONFIG_NEED_NODE_MEMMAP_SIZE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_HIGHPTE=y CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MTRR=y CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_SECCOMP=y CONFIG_HZ_1000=y CONFIG_SCHED_HRTICK=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCIEASPM=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=y CONFIG_CARDBUS=y CONFIG_YENTA=y CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_PCCARD_NONSTATIC=y CONFIG_BINFMT_ELF=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_FIB_HASH=y CONFIG_INET_LRO=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_CUBIC=y CONFIG_TCP_MD5SIG=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_FTP=y CONFIG_NF_CONNTRACK_IRC=y CONFIG_NF_CONNTRACK_SIP=y CONFIG_NF_CT_NETLINK=y CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_SECMARK=y CONFIG_NETFILTER_XT_TARGET_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_STATE=y CONFIG_NF_DEFRAG_IPV4=y CONFIG_NF_CONNTRACK_IPV4=y CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_NF_NAT=y CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_NF_NAT_FTP=y CONFIG_NF_NAT_IRC=y CONFIG_NF_NAT_SIP=y CONFIG_IP_NF_MANGLE=y CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y CONFIG_NET_SCH_DRR=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y CONFIG_NET_CLS_FLOW=y CONFIG_NET_CLS_CGROUP=y CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_CMP=y CONFIG_NET_EMATCH_NBYTE=y CONFIG_NET_EMATCH_U32=y CONFIG_NET_EMATCH_META=y CONFIG_NET_EMATCH_TEXT=y CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=y CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=y CONFIG_NET_ACT_IPT=y CONFIG_NET_ACT_NAT=y CONFIG_NET_ACT_PEDIT=y CONFIG_NET_ACT_SIMP=y CONFIG_NET_ACT_SKBEDIT=y CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y CONFIG_WIRELESS=y CONFIG_CFG80211=y CONFIG_CFG80211_DEFAULT_PS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=y CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_LEDS=y CONFIG_DEVTMPFS=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y CONFIG_CDROM_PKTCDVD=y CONFIG_HAVE_IDE=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_ATA_SFF=y CONFIG_MD=y CONFIG_BLK_DEV_DM=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_MII=y CONFIG_NETDEV_1000=y CONFIG_ATL1C=y CONFIG_WLAN=y CONFIG_WLAN_80211=y CONFIG_ATH_COMMON=y CONFIG_ATH9K=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TABLET=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HANGCHECK_TIMER=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_I801=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_POWER_SUPPLY=y CONFIG_HWMON=y CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_SSB_POSSIBLE=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=y CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_MEDIA=y CONFIG_MEDIA_TUNER=y CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA9887=y CONFIG_MEDIA_TUNER_TEA5761=y CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_MT20XX=y CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC5000=y CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_CAPTURE_DRIVERS=y CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=y CONFIG_USB_PWC_INPUT_EVDEV=y CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_DISPLAY_SUPPORT=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VMASTER=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_DRIVERS=y CONFIG_SND_PCI=y CONFIG_SND_HDA_INTEL=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_USB=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HIDRAW=y CONFIG_USB_HID=y CONFIG_USB_HIDDEV=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_GREENASIA=y CONFIG_HID_SMARTJOYPLUS=y CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_CMOS=y CONFIG_DMADEVICES=y CONFIG_X86_PLATFORM_DEVICES=y CONFIG_FIRMWARE_MEMMAP=y CONFIG_DMIID=y CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT4_FS_XATTR=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_CIFS=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_TRACING_SUPPORT=y CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DOUBLEFAULT=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_NONE=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_VMAC=y CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_RMD128=y CONFIG_CRYPTO_RMD160=y CONFIG_CRYPTO_RMD256=y CONFIG_CRYPTO_RMD320=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_586=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_SALSA20=y CONFIG_CRYPTO_SALSA20_586=y CONFIG_CRYPTO_SEED=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_586=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_HAVE_KVM=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y
jajko 3.0.18 - tu nie działa mimo tego samego configa ;(
cat config-3.0.18 | grep =y
Kod:
CONFIG_X86_32=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_HAVE_INTEL_TXT=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_X86_32_LAZY_GS=y CONFIG_KTIME_SCALAR=y CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y CONFIG_EXPERIMENTAL=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_HAVE_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y CONFIG_RCU_BOOST=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_EVENTS=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_TICK_ONESHOT=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_NO_BOOTMEM=y CONFIG_MATOM=y CONFIG_X86_CMPXCHG=y CONFIG_CMPXCHG_LOCAL=y CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_IOMMU_API=y CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_VM86=y CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_HIGHMEM4G=y CONFIG_HIGHMEM=y CONFIG_NEED_NODE_MEMMAP_SIZE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y CONFIG_HAVE_MEMBLOCK=y CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y CONFIG_HIGHPTE=y CONFIG_MTRR=y CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_SECCOMP=y CONFIG_HZ_1000=y CONFIG_SCHED_HRTICK=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ACPI=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_X86_PM_TIMER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_X86_ACPI_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_DMAR=y CONFIG_DMAR_DEFAULT_ON=y CONFIG_DMAR_FLOPPY_WA=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCIEASPM=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_HT_IRQ=y CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y CONFIG_PCCARD=y CONFIG_CARDBUS=y CONFIG_YENTA=y CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_BINFMT_ELF=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_ROUTE_CLASSID=y CONFIG_INET_LRO=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_CUBIC=y CONFIG_TCP_MD5SIG=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_FTP=y CONFIG_NF_CONNTRACK_IRC=y CONFIG_NF_CONNTRACK_SIP=y CONFIG_NF_CT_NETLINK=y CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_SECMARK=y CONFIG_NETFILTER_XT_TARGET_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_STATE=y CONFIG_NF_DEFRAG_IPV4=y CONFIG_NF_CONNTRACK_IPV4=y CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_NF_NAT=y CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_NF_NAT_FTP=y CONFIG_NF_NAT_IRC=y CONFIG_NF_NAT_SIP=y CONFIG_IP_NF_MANGLE=y CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFB=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y CONFIG_NET_SCH_DRR=y CONFIG_NET_SCH_MQPRIO=y CONFIG_NET_SCH_CHOKE=y CONFIG_NET_SCH_QFQ=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y CONFIG_NET_CLS_FLOW=y CONFIG_NET_CLS_CGROUP=y CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_CMP=y CONFIG_NET_EMATCH_NBYTE=y CONFIG_NET_EMATCH_U32=y CONFIG_NET_EMATCH_META=y CONFIG_NET_EMATCH_TEXT=y CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=y CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=y CONFIG_NET_ACT_IPT=y CONFIG_NET_ACT_NAT=y CONFIG_NET_ACT_PEDIT=y CONFIG_NET_ACT_SIMP=y CONFIG_NET_ACT_SKBEDIT=y CONFIG_NET_ACT_CSUM=y CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_WEXT_PRIV=y CONFIG_CFG80211=y CONFIG_CFG80211_DEFAULT_PS=y CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=y CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_LEDS=y CONFIG_DEVTMPFS=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_PNP=y CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y CONFIG_CDROM_PKTCDVD=y CONFIG_HAVE_IDE=y CONFIG_SCSI_MOD=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_ATA_ACPI=y CONFIG_SATA_AHCI=y CONFIG_ATA_SFF=y CONFIG_ATA_BMDMA=y CONFIG_MD=y CONFIG_BLK_DEV_DM=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_IMQ_BEHAVIOR_AB=y CONFIG_MII=y CONFIG_NETDEV_1000=y CONFIG_ATL1C=y CONFIG_WLAN=y CONFIG_ATH_COMMON=y CONFIG_ATH9K_HW=y CONFIG_ATH9K_COMMON=y CONFIG_ATH9K=y CONFIG_ATH9K_PCI=y CONFIG_ATH9K_RATE_CONTROL=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y CONFIG_INPUT_TABLET=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y CONFIG_TOUCHSCREEN_USB_JASTEC=y CONFIG_TOUCHSCREEN_USB_E2I=y CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y CONFIG_TOUCHSCREEN_USB_NEXIO=y CONFIG_INPUT_MISC=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HPET=y CONFIG_HANGCHECK_TIMER=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_I801=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_POWER_SUPPLY=y CONFIG_HWMON=y CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_SSB_POSSIBLE=y CONFIG_BCMA_POSSIBLE=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=y CONFIG_VIDEO_MEDIA=y CONFIG_RC_CORE=y CONFIG_LIRC=y CONFIG_RC_MAP=y CONFIG_IR_NEC_DECODER=y CONFIG_IR_RC5_DECODER=y CONFIG_IR_RC6_DECODER=y CONFIG_IR_JVC_DECODER=y CONFIG_IR_SONY_DECODER=y CONFIG_IR_RC5_SZ_DECODER=y CONFIG_IR_LIRC_CODEC=y CONFIG_MEDIA_TUNER=y CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA827X=y CONFIG_MEDIA_TUNER_TDA18271=y CONFIG_MEDIA_TUNER_TDA9887=y CONFIG_MEDIA_TUNER_TEA5761=y CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_MT20XX=y CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC5000=y CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_CAPTURE_DRIVERS=y CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_IR_I2C=y CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_DISPLAY_SUPPORT=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VMASTER=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_DRIVERS=y CONFIG_SND_PCI=y CONFIG_SND_HDA_INTEL=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_USB=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HIDRAW=y CONFIG_USB_HID=y CONFIG_USB_HIDDEV=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_ENE_UB6250=y CONFIG_USB_LIBUSUAL=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_NFC_DEVICES=y CONFIG_ACCESSIBILITY=y CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_NES_DEBUG=y CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_CMOS=y CONFIG_DMADEVICES=y CONFIG_DMADEVICES_DEBUG=y CONFIG_DMADEVICES_VDEBUG=y CONFIG_DMA_ENGINE=y CONFIG_NET_DMA=y CONFIG_ASYNC_TX_DMA=y CONFIG_AUXDISPLAY=y CONFIG_STAGING=y CONFIG_ET131X_DEBUG=y CONFIG_USBIP_DEBUG=y CONFIG_BRCMDBG=y CONFIG_COMEDI_DEBUG=y CONFIG_R8712_AP=y CONFIG_RTS_PSTOR_DEBUG=y CONFIG_POHMELFS_DEBUG=y CONFIG_POHMELFS_CRYPTO=y CONFIG_DRM_NOUVEAU_BACKLIGHT=y CONFIG_DRM_NOUVEAU_DEBUG=y CONFIG_XVMALLOC=y CONFIG_ZRAM_DEBUG=y CONFIG_DT3155_CCIR=y CONFIG_LIRC_STAGING=y CONFIG_EASYCAP_SND=y CONFIG_EASYCAP_DEBUG=y CONFIG_MACH_NO_WESTBRIDGE=y CONFIG_X86_PLATFORM_DEVICES=y CONFIG_FUJITSU_LAPTOP_DEBUG=y CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y CONFIG_THINKPAD_ACPI_DEBUG=y CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y CONFIG_ACPI_WMI=y CONFIG_CLKSRC_I8253=y CONFIG_FIRMWARE_MEMMAP=y CONFIG_DMIID=y CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT4_FS_XATTR=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_DEPRECATED=y CONFIG_NFSD_V3=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_CIFS=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_RCU_CPU_STALL_VERBOSE=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACING_SUPPORT=y CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DOUBLEFAULT=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_NONE=y CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_VMAC=y CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_RMD128=y CONFIG_CRYPTO_RMD160=y CONFIG_CRYPTO_RMD256=y CONFIG_CRYPTO_RMD320=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_586=y CONFIG_CRYPTO_AES_NI_INTEL=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_SALSA20=y CONFIG_CRYPTO_SALSA20_586=y CONFIG_CRYPTO_SEED=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_586=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y CONFIG_HAVE_KVM=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y CONFIG_XZ_DEC_TEST=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPU_RMAP=y CONFIG_NLATTR=y CONFIG_AVERAGE=y
W 2.6 montowanie myszki w dmesg wygląda następująco
Kod:
[ 1.627341] mice: PS/2 mouse device common for all mice
a tak w 3.0.18
Kod:
[ 1.989872] mousedev: PS/2 mouse device common for all mice
podmieniłem drivers/input/mousedev.c z 2.6 do 3.0 i podczas kompilacji wywala mi takie errory pomoże ktoś ??
Kod:
drivers/input/mousedev.c:18:28: error: linux/smp_lock.h: Nie ma takiego pliku ani katalogu drivers/input/mousedev.c: In function ‘mousedev_touchpad_event’: drivers/input/mousedev.c:140: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:140: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:155: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:155: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c: In function ‘mousedev_abs_event’: drivers/input/mousedev.c:176: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:176: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:179: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:180: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:181: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:182: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:184: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:189: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:189: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:192: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:193: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:194: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:195: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:197: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c: In function ‘mousedev_open’: drivers/input/mousedev.c:545: error: implicit declaration of function ‘lock_kernel’ drivers/input/mousedev.c:548: error: implicit declaration of function ‘unlock_kernel’ make[2]: *** [drivers/input/mousedev.o] Błąd 1 make[1]: *** [drivers/input] Błąd 2 make: *** [drivers] Błąd 2 make: *** Oczekiwanie na niezakończone zadania...
przekopiowałem /usr/src/linux-2.6.32.56/include/linux/smp_lock.h
i teraz mi wywala tylko
Kod:
drivers/input/mousedev.c: In function ‘mousedev_touchpad_event’: drivers/input/mousedev.c:140: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:140: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:155: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:155: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c: In function ‘mousedev_abs_event’: drivers/input/mousedev.c:176: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:176: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:179: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:180: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:181: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:182: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:184: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:189: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:189: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:192: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:193: error: ‘struct input_dev’ has no member named ‘absmax’ drivers/input/mousedev.c:194: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:195: error: ‘struct input_dev’ has no member named ‘absmin’ drivers/input/mousedev.c:197: error: ‘struct input_dev’ has no member named ‘absmin’ make[2]: *** [drivers/input/mousedev.o] Błąd 1 make[1]: *** [drivers/input] Błąd 2 make: *** [drivers] Błąd 2 make: *** Oczekiwanie na niezakończone zadania....
skopiowałem też wszystkie biblioteki z których korzysta, czyli:
Kod:
root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/sched.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/slab.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/smp_lock.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/poll.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/module.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/init.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/input.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/random.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/major.h include/linux/ root@Notebook:/usr/src/linux-3.0.18# cp ../linux-2.6.32.56/include/linux/device.h include/linux/
i teraz wywala mi coś takiego
Kod:
CHK include/linux/version.h
CHK include/generated/utsrelease.h
CC arch/x86/kernel/asm-offsets.s
In file included from include/linux/crypto.h:21,
from arch/x86/kernel/asm-offsets.c:8:
include/linux/module.h: In function ‘__module_get’:
include/linux/module.h:472: error: too many arguments to function ‘trace_module_get’
include/linux/module.h: In function ‘try_module_get’:
include/linux/module.h:486: error: too many arguments to function ‘trace_module_get’
In file included from arch/x86/kernel/asm-offsets.c:9:
include/linux/sched.h: In function ‘get_mm_hiwater_rss’:
include/linux/sched.h:425: error: ‘struct mm_struct’ has no member named ‘_file_rss’
include/linux/sched.h:425: error: ‘struct mm_struct’ has no member named ‘_anon_rss’
include/linux/sched.h:425: warning: type defaults to ‘int’ in declaration of ‘_max2’
include/linux/sched.h:425: error: ‘struct mm_struct’ has no member named ‘_file_rss’
include/linux/sched.h:425: error: ‘struct mm_struct’ has no member named ‘_anon_rss’
include/linux/sched.h:425: warning: comparison of distinct pointer types lacks a cast
In file included from include/linux/suspend.h:8,
from arch/x86/kernel/asm-offsets.c:12:
include/linux/mm.h: At top level:
include/linux/mm.h:1057: error: expected identifier or ‘(’ before ‘struct’
include/linux/mm.h:1065: error: expected identifier or ‘(’ before ‘struct’
include/linux/mm.h:1065: error: expected ‘)’ before ‘->’ token
include/linux/mm.h:1071: error: expected identifier or ‘(’ before ‘struct’
include/linux/mm.h:1076: error: expected identifier or ‘(’ before ‘struct’
include/linux/mm.h:1081: error: expected identifier or ‘(’ before ‘struct’
include/linux/mm.h:1086: error: expected identifier or ‘(’ before ‘struct’
include/linux/mm.h:1086: error: expected ‘)’ before ‘->’ token
include/linux/mm.h:1086: error: expected ‘)’ before ‘+’ token
include/linux/mm.h:1092: error: redefinition of ‘get_mm_hiwater_rss’
include/linux/sched.h:423: note: previous definition of ‘get_mm_hiwater_rss’ was here
include/linux/mm.h: In function ‘get_mm_hiwater_rss’:
include/linux/mm.h:1094: error: ‘struct mm_struct’ has no member named ‘_file_rss’
include/linux/mm.h:1094: error: ‘struct mm_struct’ has no member named ‘_anon_rss’
include/linux/mm.h:1094: warning: type defaults to ‘int’ in declaration of ‘_max2’
include/linux/mm.h:1094: error: ‘struct mm_struct’ has no member named ‘_file_rss’
include/linux/mm.h:1094: error: ‘struct mm_struct’ has no member named ‘_anon_rss’
include/linux/mm.h:1094: warning: comparison of distinct pointer types lacks a cast
include/linux/mm.h: At top level:
include/linux/mm.h:1097: error: redefinition of ‘get_mm_hiwater_vm’
include/linux/sched.h:437: note: previous definition of ‘get_mm_hiwater_vm’ was here
include/linux/mm.h:1102: error: expected identifier or ‘(’ before ‘do’
include/linux/mm.h:1102: error: expected identifier or ‘(’ before ‘while’
include/linux/mm.h:1110: error: expected identifier or ‘(’ before ‘do’
include/linux/mm.h:1110: error: expected identifier or ‘(’ before ‘while’
include/linux/mm.h:1116: error: redefinition of ‘setmax_mm_hiwater_rss’
include/linux/sched.h:428: note: previous definition of ‘setmax_mm_hiwater_rss’ was here
make[1]: *** [arch/x86/kernel/asm-offsets.s] Błąd 1
make: *** [prepare0] Błąd 2więc niewiem czy opłaca się kopiować i uzupełniać o stare biblioteki, czy to jestpoprostu niekonczaca się opowieść ;(
znalazłem coś takiego, ale nie ogarniam, mógł by mi ktoś wytłumaczyć o co chodzi ??
http://lii-enac.fr/en/architecture/linux-input/multitouch-ubuntu-howto.html
Ostatnio edytowany przez Pablik (2012-02-10 16:11:33)
Offline
#16 2012-02-11 23:01:00
NIC - Członek DUG
Re: Klawisze funkcyjne i touchpad w jajku
Nie opłaca (chyba). Nie tędy droga. Po pierwsze te konfigi które podałeś nie są takie same. Są bardzo różne.
Np.
Kod:
< CONFIG_MOUSE_PS2=y 353a410,412 > CONFIG_MOUSE_PS2_ELANTECH=y > CONFIG_MOUSE_PS2_SENTELIC=y > CONFIG_MOUSE_PS2_TOUCHKIT=y
I taka uwaga. "Y" to nie moduły, tylko wkompilowanie na stałe w jądro.
Odpal sobie jedno z:
make xconfig
make menuconfig
make gconfig
I pozaznaczaj wszystko co związane z PS/2 i touchpadami na "Y". Na 3.x kernelu. Wtedy winno zadziałać.
Chyba te moduły Cię interesują:
HID_MULTITOUCH
MOUSE_SYNAPTICS_I2C
MOUSE_PS2_SYNAPTICS
TOUCHSCREEN_SYNAPTICS_I2C_RMI4
(opcjonalnie) TOUCHSCREEN_CLEARPAD_TM1217
[dwa ostatnie są w STAGINGu stąd możesz ich nie mieć; ja patrzę w 3.2]
Ostatnio edytowany przez NIC (2012-02-12 00:05:36)
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#17 2012-02-12 13:20:58
bobycob - Członek z Ramienia
- bobycob
- Członek z Ramienia
- Skąd: Wrocław
- Zarejestrowany: 2007-08-15
Re: Klawisze funkcyjne i touchpad w jajku
też mam acera aspire tylko tego dużego ;)
Problem z touchpadem też przeżywałem, dopiero na testowych 3.2 zaczął prawidłowo działać i na tym kernelu jest ok.
Nie sprawdzałem czy to to samo urządzenie - mam lenia ;). W każdym razie do mojego 5830gt bankowo nie było sterownika do touchpada i był wykrywany jako mysz. Przy 3.2 jest rozpoznawany prawidłowo.
Offline
#18 2012-02-12 13:25:14
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Klawisze funkcyjne i touchpad w jajku
http://www.youtube.com/watch?v=k-8Nrnulkyw&feature=youtu.be
Tak a propos acer'a :D
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#19 2012-02-12 14:11:07
NIC - Członek DUG
Re: Klawisze funkcyjne i touchpad w jajku
Tak, tak. Potwierdzam. Poniekąd ma to związek z moim touchpadem, choć jest zgoła inny. Ale sterownik ten sam bodaj: https://help.ubuntu.com/community/AsusZenbook#Touchpad Tak więc tego typu touchpady działają od Linuksa 3.2.
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#20 2012-02-12 14:15:53
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
[quote=NIC]Tak, tak. Potwierdzam. Poniekąd ma to związek z moim touchpadem, choć jest zgoła inny. Ale sterownik ten sam bodaj: https://help.ubuntu.com/community/AsusZenbook#Touchpad Tak więc tego typu touchpady działają od Linuksa 3.2.[/quote]
nie wiem co rozumiesz przez działanie tochpad'a bo on dział już teraz(normalnie mogę poruszać myszką), lecz scrollbar(takie coś po prawej stronie touchpada do przesuwania w górę i dół ) nie działa na 3.0.18 ale na 2.6 działa normalnie
[quote=NIC]I pozaznaczaj wszystko co związane z PS/2 i touchpadami na "Y". Na 3.x kernelu. Wtedy winno zadziałać.
Chyba te moduły Cię interesują:
HID_MULTITOUCH
MOUSE_SYNAPTICS_I2C
MOUSE_PS2_SYNAPTICS
TOUCHSCREEN_SYNAPTICS_I2C_RMI4
(opcjonalnie) TOUCHSCREEN_CLEARPAD_TM1217
[dwa ostatnie są w STAGINGu stąd możesz ich nie mieć; ja patrzę w 3.2][/quote]
Dodałem je i nic, dalej nie działa ;(
Przypomnę że w jajku 2.6 niema tych modułów a ten głupi scrollbar działa ;(
wszystkie moduły z jajka 2.6 które miały w nazwie touch lub mouse dodałem do jajka 3.0.18 i dalej nic ;(
Ostatnio edytowany przez Pablik (2012-02-12 14:58:01)
Offline
#21 2012-02-12 15:24:04
bobycob - Członek z Ramienia
- bobycob
- Członek z Ramienia
- Skąd: Wrocław
- Zarejestrowany: 2007-08-15
Re: Klawisze funkcyjne i touchpad w jajku
dodam, że mój ma multitouch który wcześniej nie działał nie tylko pseudo scroll
Offline
#22 2012-02-12 15:40:59
NIC - Członek DUG
Re: Klawisze funkcyjne i touchpad w jajku
Pewnie chodzi o to że Pablik ustawił go jako PS/2. Cofnij wszystkie zmiany (ps/2, imps, etc). On ma własny sterownik.
Chodzi o to by to touchpad a nie mysz. dmesg zapokaż.
PS. Skompiluj więc jądro 3.x z configiej z 2.6. Bo jak wcześniej wspomniałem to co wkleiłem wcześniej to dwa różne configi.
PS 2. Wypróbuj kernel 3.2
Ostatnio edytowany przez NIC (2012-02-12 15:41:18)
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#23 2012-02-12 22:08:35
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
[quote=NIC]PS. Skompiluj więc jądro 3.x z configiem z 2.6. Bo jak wcześniej wspomniałem to co wkleiłem wcześniej to dwa różne configi.[/quote]
Wcześniej też kompilowałem na tym samym configu, ale dlatego ze taka różnica z 2.6 do 3.0 to chyba eis moduły same pozmieniały albo dodały.
Skompiluje ponownie i opisze całą akcje .
1. kopiuję config'a
/usr/src/linux-3.0.18# cp /boot/config-2.6.32.56 .config
2. ładuję moduly
make menuconfig
Load an Alternate Configuration File
Save an Alternate Configuration File
3. kompilujemy
make -j 2 && make install -j 2 && make modules_install -j 2
i to by było na tyle
dmesg z 2.6
Kod:
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.56 (root@Notebook) (gcc version 4.4.5 (Debian 4.4.5-8) ) #3 SMP PREEMPT Fri Feb 10 11:09:28 CET 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f494000 (usable) [ 0.000000] BIOS-e820: 000000003f494000 - 000000003f4bf000 (reserved) [ 0.000000] BIOS-e820: 000000003f4bf000 - 000000003f578000 (usable) [ 0.000000] BIOS-e820: 000000003f578000 - 000000003f5bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f5bf000 - 000000003f5ed000 (usable) [ 0.000000] BIOS-e820: 000000003f5ed000 - 000000003f5ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f5ff000 - 000000003f600000 (usable) [ 0.000000] BIOS-e820: 000000003f600000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.6 present. [ 0.000000] last_pfn = 0x3f600 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-through [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF00000 mask 0FFF00000 write-protect [ 0.000000] 1 base 000000000 mask 0E0000000 write-back [ 0.000000] 2 base 020000000 mask 0E0000000 write-back [ 0.000000] 3 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 000174d2a0] TEXT DATA BSS ==> [0001000000 - 000174d2a0] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [000174e000 - 0001755287] BRK ==> [000174e000 - 0001755287] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f494 [ 0.000000] 0: 0x0003f4bf -> 0x0003f578 [ 0.000000] 0: 0x0003f5bf -> 0x0003f5ed [ 0.000000] 0: 0x0003f5ff -> 0x0003f600 [ 0.000000] On node 0 totalpages: 259355 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 31873 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @c2000000 s28568 r0 d20584 u4194304 [ 0.000000] pcpu-alloc: s28568 r0 d20584 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257326 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.56 root=/dev/sda1 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f600) [ 0.000000] Memory: 1020364k/1038336k available (4485k kernel code, 16584k reserved, 2201k data, 332k init, 128504k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff92000 - 0xfffff000 ( 436 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1688000 - 0xc16db000 ( 332 kB) [ 0.000000] .data : 0xc146155d - 0xc1687d18 (2201 kB) [ 0.000000] .text : 0xc1000000 - 0xc146155d (4485 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Experimental preemptable hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.940 MHz processor. [ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.88 BogoMIPS (lpj=1662940) [ 0.001046] Mount-cache hash table entries: 512 [ 0.001218] Initializing cgroup subsys net_cls [ 0.001239] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.001244] CPU: L2 cache: 512K [ 0.001248] CPU: Unsupported number of siblings 2 [ 0.001254] mce: CPU supports 5 MCE banks [ 0.001268] using mwait in idle threads. [ 0.001279] Performance Events: Atom events, Intel PMU driver. [ 0.001290] ... version: 3 [ 0.001293] ... bit width: 40 [ 0.001297] ... generic registers: 2 [ 0.001300] ... value mask: 000000ffffffffff [ 0.001304] ... max period: 000000007fffffff [ 0.001308] ... fixed-purpose events: 3 [ 0.001311] ... event mask: 0000000700000003 [ 0.001319] Checking 'hlt' instruction... OK. [ 0.005664] SMP alternatives: switching to UP code [ 0.008283] Freeing SMP alternatives: 14k freed [ 0.008797] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.008803] weird, boot CPU (#0) not listed by the BIOS. [ 0.008806] SMP motherboard not detected. [ 0.110005] SMP disabled [ 0.112998] Brought up 1 CPUs [ 0.113004] Total of 1 processors activated (3325.88 BogoMIPS). [ 0.114065] devtmpfs: initialized [ 0.114216] khelper used greatest stack depth: 7512 bytes left [ 0.114781] NET: Registered protocol family 16 [ 0.116160] PCI: Using configuration type 1 for base access [ 0.116942] khelper used greatest stack depth: 7192 bytes left [ 0.130064] bio: create slab <bio-0> at 0 [ 0.131269] vgaarb: loaded [ 0.131617] SCSI subsystem initialized [ 0.132036] libata version 3.00 loaded. [ 0.132263] usbcore: registered new interface driver usbfs [ 0.132359] usbcore: registered new interface driver hub [ 0.132466] usbcore: registered new device driver usb [ 0.133024] PCI: Probing PCI hardware [ 0.133031] PCI: Probing PCI hardware (bus 00) [ 0.133202] pci 0000:00:02.0: reg 10 32bit mmio: [0x58180000-0x581fffff] [ 0.133211] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7] [ 0.133219] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff] [ 0.133226] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58000000-0x580fffff] [ 0.133275] pci 0000:00:02.1: reg 10 32bit mmio: [0x58100000-0x5817ffff] [ 0.133395] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58200000-0x58203fff] [ 0.133473] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.133480] pci 0000:00:1b.0: PME# disabled [ 0.133591] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.133598] pci 0000:00:1c.0: PME# disabled [ 0.133707] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.133714] pci 0000:00:1c.1: PME# disabled [ 0.133786] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f] [ 0.133857] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f] [ 0.133927] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f] [ 0.134048] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f] [ 0.134128] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58204400-0x582047ff] [ 0.134213] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.134221] pci 0000:00:1d.7: PME# disabled [ 0.134479] pci 0000:00:1f.2: reg 10 io port: [0x60b8-0x60bf] [ 0.134490] pci 0000:00:1f.2: reg 14 io port: [0x60cc-0x60cf] [ 0.134500] pci 0000:00:1f.2: reg 18 io port: [0x60b0-0x60b7] [ 0.134511] pci 0000:00:1f.2: reg 1c io port: [0x60c8-0x60cb] [ 0.134521] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af] [ 0.134532] pci 0000:00:1f.2: reg 24 32bit mmio: [0x58204000-0x582043ff] [ 0.134584] pci 0000:00:1f.2: PME# supported from D3hot [ 0.134591] pci 0000:00:1f.2: PME# disabled [ 0.134660] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f] [ 0.134772] pci 0000:01:00.0: reg 10 64bit mmio: [0x57000000-0x5703ffff] [ 0.134786] pci 0000:01:00.0: reg 18 io port: [0x5000-0x507f] [ 0.134903] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134912] pci 0000:01:00.0: PME# disabled [ 0.137108] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff] [ 0.137117] pci 0000:00:1c.0: bridge 32bit mmio: [0x57000000-0x57ffffff] [ 0.137128] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff] [ 0.137201] pci 0000:02:00.0: reg 10 64bit mmio: [0x56000000-0x5600ffff] [ 0.137327] pci 0000:02:00.0: supports D1 [ 0.137331] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.137339] pci 0000:02:00.0: PME# disabled [ 0.137379] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.137474] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.137482] pci 0000:00:1c.1: bridge 32bit mmio: [0x56000000-0x56ffffff] [ 0.137492] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x51ffffff] [ 0.137560] pci 0000:00:1e.0: transparent bridge [ 0.137703] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.139739] PCI: Discovered primary peer bus ff [IRQ] [ 0.139761] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27bc] [ 0.139791] PCI: setting IRQ 11 as level-triggered [ 0.139798] pci 0000:00:1c.0: found PCI INT A -> IRQ 11 [ 0.139805] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:02.0 [ 0.139814] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1b.0 [ 0.139825] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.0 [ 0.139839] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.7 [ 0.139856] pci 0000:00:1c.0: sharing IRQ 11 with 0000:01:00.0 [ 0.139869] PCI: setting IRQ 10 as level-triggered [ 0.139875] pci 0000:00:1c.1: found PCI INT B -> IRQ 10 [ 0.139894] pci 0000:00:1c.1: sharing IRQ 10 with 0000:00:1d.1 [ 0.139912] pci 0000:00:1c.1: sharing IRQ 10 with 0000:00:1f.2 [ 0.139919] pci 0000:00:1c.1: sharing IRQ 10 with 0000:00:1f.3 [ 0.139930] pci 0000:00:1c.1: sharing IRQ 10 with 0000:02:00.0 [ 0.140547] cfg80211: Calling CRDA to update world regulatory domain [ 0.140642] Switching to clocksource tsc [ 0.141976] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.141985] pci 0000:00:1c.0: IO window: 0x5000-0x5fff [ 0.141985] pci 0000:00:1c.0: MEM window: 0x57000000-0x57ffffff [ 0.141993] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff [ 0.142005] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.142011] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.142019] pci 0000:00:1c.1: MEM window: 0x56000000-0x56ffffff [ 0.142027] pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x00000051ffffff [ 0.142038] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.142043] pci 0000:00:1e.0: IO window: disabled [ 0.142050] pci 0000:00:1e.0: MEM window: disabled [ 0.142057] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.142083] pci 0000:00:1c.0: found PCI INT A -> IRQ 11 [ 0.142091] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:02.0 [ 0.142100] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1b.0 [ 0.142112] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.0 [ 0.142125] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.7 [ 0.142141] pci 0000:00:1c.0: sharing IRQ 11 with 0000:01:00.0 [ 0.142153] pci 0000:00:1c.0: setting latency timer to 64 [ 0.142171] pci 0000:00:1c.1: found PCI INT B -> IRQ 10 [ 0.142191] pci 0000:00:1c.1: sharing IRQ 10 with 0000:00:1d.1 [ 0.142209] pci 0000:00:1c.1: sharing IRQ 10 with 0000:00:1f.2 [ 0.142216] pci 0000:00:1c.1: sharing IRQ 10 with 0000:00:1f.3 [ 0.142226] pci 0000:00:1c.1: sharing IRQ 10 with 0000:02:00.0 [ 0.142234] pci 0000:00:1c.1: setting latency timer to 64 [ 0.142247] pci 0000:00:1e.0: setting latency timer to 64 [ 0.142256] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.142261] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.142267] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff] [ 0.142273] pci_bus 0000:01: resource 1 mem: [0x57000000-0x57ffffff] [ 0.142278] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff] [ 0.142284] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] [ 0.142289] pci_bus 0000:02: resource 1 mem: [0x56000000-0x56ffffff] [ 0.142295] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff] [ 0.142301] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.142306] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 0.142311] pci_bus 0000:ff: resource 0 io: [0x00-0xffff] [ 0.142317] pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffff] [ 0.142379] NET: Registered protocol family 2 [ 0.142560] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.143175] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.144140] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.144566] TCP: Hash tables configured (established 131072 bind 65536) [ 0.144572] TCP reno registered [ 0.144727] NET: Registered protocol family 1 [ 0.145050] RPC: Registered udp transport module. [ 0.145056] RPC: Registered tcp transport module. [ 0.145060] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.145081] pci 0000:00:02.0: Boot video device [ 0.156350] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.157498] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107 [ 0.157596] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.158519] highmem bounce pool size: 64 pages [ 0.158531] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.166535] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.167059] Slow work thread pool: Starting up [ 0.167136] Slow work thread pool: Ready [ 0.167371] msgmni has been set to 1742 [ 0.168536] cryptomgr_test used greatest stack depth: 7024 bytes left [ 0.168816] cryptomgr_test used greatest stack depth: 6380 bytes left [ 0.169972] alg: No test for fcrypt (fcrypt-generic) [ 0.174448] alg: No test for stdrng (krng) [ 0.192341] alg: No test for ghash (ghash-generic) [ 0.192630] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.192638] io scheduler noop registered [ 0.192642] io scheduler anticipatory registered [ 0.192799] io scheduler cfq registered (default) [ 0.193068] pcieport 0000:00:1c.0: irq 16 for MSI/MSI-X [ 0.193085] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.193390] pcieport 0000:00:1c.1: irq 17 for MSI/MSI-X [ 0.193406] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.215154] Linux agpgart interface v0.103 [ 0.215185] agpgart-intel 0000:00:00.0: Intel IGD Chipset [ 0.215433] agpgart-intel 0000:00:00.0: detected 8188K stolen memory [ 0.228504] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 0.228594] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 0.228599] Hangcheck: Using get_cycles(). [ 0.228697] [drm] Initialized drm 1.1.0 20060810 [ 0.228729] i915 0000:00:02.0: found PCI INT A -> IRQ 11 [ 0.228743] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:1b.0 [ 0.228755] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:1d.0 [ 0.228770] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:1d.7 [ 0.228788] i915 0000:00:02.0: sharing IRQ 11 with 0000:01:00.0 [ 0.228798] i915 0000:00:02.0: setting latency timer to 64 [ 0.240298] i915 0000:00:02.0: irq 18 for MSI/MSI-X [ 0.240311] [drm] set up 7M of stolen space [ 0.755628] fbcon: inteldrmfb (fb0) is primary device [ 0.798570] [drm] Big FIFO is enabled [ 0.798579] [drm] LVDS-8: set mode 1024x600 e [ 0.798585] [drm] Big FIFO is enabled [ 1.019494] Console: switching to colour frame buffer device 128x37 [ 1.025714] fb0: inteldrmfb frame buffer device [ 1.025718] registered panic notifier [ 1.025727] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.027683] loop: module loaded [ 1.028302] ahci 0000:00:1f.2: version 3.0 [ 1.028331] ahci 0000:00:1f.2: found PCI INT B -> IRQ 10 [ 1.028355] ahci 0000:00:1f.2: sharing IRQ 10 with 0000:00:1d.1 [ 1.028377] ahci 0000:00:1f.2: sharing IRQ 10 with 0000:00:1f.3 [ 1.028388] ahci 0000:00:1f.2: sharing IRQ 10 with 0000:02:00.0 [ 1.028452] ahci 0000:00:1f.2: irq 19 for MSI/MSI-X [ 1.028507] ahci: SSS flag set, parallel bus scan disabled [ 1.028552] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.028559] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.028568] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.028939] scsi0 : ahci [ 1.029255] scsi1 : ahci [ 1.029471] scsi2 : ahci [ 1.029739] scsi3 : ahci [ 1.029918] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 19 [ 1.029926] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 19 [ 1.029931] ata3: DUMMY [ 1.029934] ata4: DUMMY [ 1.030127] atl1c 0000:01:00.0: found PCI INT A -> IRQ 11 [ 1.030141] atl1c 0000:01:00.0: sharing IRQ 11 with 0000:00:1b.0 [ 1.030154] atl1c 0000:01:00.0: sharing IRQ 11 with 0000:00:1d.0 [ 1.030168] atl1c 0000:01:00.0: sharing IRQ 11 with 0000:00:1d.7 [ 1.030199] atl1c 0000:01:00.0: setting latency timer to 64 [ 1.095379] atl1c 0000:01:00.0: version 1.0.0.1-NAPI [ 1.096044] ath9k 0000:02:00.0: found PCI INT A -> IRQ 10 [ 1.096067] ath9k 0000:02:00.0: sharing IRQ 10 with 0000:00:1d.1 [ 1.096089] ath9k 0000:02:00.0: sharing IRQ 10 with 0000:00:1f.3 [ 1.096111] ath9k 0000:02:00.0: setting latency timer to 64 [ 1.534667] ath: EEPROM regdomain: 0x65 [ 1.534672] ath: EEPROM indicates we should expect a direct regpair map [ 1.534679] ath: Country alpha2 being used: 00 [ 1.534683] ath: Regpair used: 0x65 [ 1.536054] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 1.536810] Registered led device: ath9k-phy0::radio [ 1.536898] Registered led device: ath9k-phy0::assoc [ 1.536990] Registered led device: ath9k-phy0::tx [ 1.537078] Registered led device: ath9k-phy0::rx [ 1.537096] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8020000, irq=10 [ 1.537341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.537380] ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 11 [ 1.537395] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:00:1b.0 [ 1.537408] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0 [ 1.537435] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:01:00.0 [ 1.537464] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.537471] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.537544] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.537583] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.537601] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.541490] ehci_hcd 0000:00:1d.7: Enabling legacy PCI PM [ 1.541501] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.541516] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x58204400 [ 1.550491] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.550746] usb usb1: configuration #1 chosen from 1 choice [ 1.550860] hub 1-0:1.0: USB hub found [ 1.550876] hub 1-0:1.0: 8 ports detected [ 1.551047] uhci_hcd: USB Universal Host Controller Interface driver [ 1.551110] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11 [ 1.551124] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1b.0 [ 1.551146] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7 [ 1.551164] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:01:00.0 [ 1.551180] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.551187] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.551202] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.551239] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00006080 [ 1.551511] usb usb2: configuration #1 chosen from 1 choice [ 1.551624] hub 2-0:1.0: USB hub found [ 1.551638] hub 2-0:1.0: 2 ports detected [ 1.551728] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 10 [ 1.551768] uhci_hcd 0000:00:1d.1: sharing IRQ 10 with 0000:00:1f.3 [ 1.551779] uhci_hcd 0000:00:1d.1: sharing IRQ 10 with 0000:02:00.0 [ 1.551791] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.551797] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.551812] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.551847] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00006060 [ 1.552100] usb usb3: configuration #1 chosen from 1 choice [ 1.552212] hub 3-0:1.0: USB hub found [ 1.552226] hub 3-0:1.0: 2 ports detected [ 1.552305] uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 11 [ 1.552356] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.552363] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.552377] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.552412] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00006040 [ 1.552702] usb usb4: configuration #1 chosen from 1 choice [ 1.552813] hub 4-0:1.0: USB hub found [ 1.552828] hub 4-0:1.0: 2 ports detected [ 1.552905] uhci_hcd 0000:00:1d.3: found PCI INT D -> IRQ 11 [ 1.552956] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.552963] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.552977] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.553013] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00006020 [ 1.553268] usb usb5: configuration #1 chosen from 1 choice [ 1.553380] hub 5-0:1.0: USB hub found [ 1.553394] hub 5-0:1.0: 2 ports detected [ 1.553569] Initializing USB Mass Storage driver... [ 1.553696] usbcore: registered new interface driver usb-storage [ 1.553700] USB Mass Storage support registered. [ 1.553823] usbcore: registered new interface driver libusual [ 1.570723] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.570734] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.571204] mice: PS/2 mouse device common for all mice [ 1.571605] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.571635] rtc0: alarms up to one day, 114 bytes nvram [ 1.571708] i2c /dev entries driver [ 1.572114] i801_smbus 0000:00:1f.3: found PCI INT B -> IRQ 10 [ 1.572139] i801_smbus 0000:00:1f.3: sharing IRQ 10 with 0000:00:1d.1 [ 1.572168] i801_smbus 0000:00:1f.3: sharing IRQ 10 with 0000:02:00.0 [ 1.572464] Linux video capture interface: v2.00 [ 1.572581] gspca: main v2.7.0 registered [ 1.572741] usbcore: registered new interface driver uvcvideo [ 1.572749] USB Video Class driver (v0.1.0) [ 1.573246] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.573522] cpuidle: using governor ladder [ 1.576098] usbcore: registered new interface driver hiddev [ 1.576190] usbcore: registered new interface driver usbhid [ 1.576198] usbhid: v2.6:USB HID core driver [ 1.576297] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 1.576572] HDA Intel 0000:00:1b.0: found PCI INT A -> IRQ 11 [ 1.576595] HDA Intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:1d.0 [ 1.576610] HDA Intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:1d.7 [ 1.576629] HDA Intel 0000:00:1b.0: sharing IRQ 11 with 0000:01:00.0 [ 1.576669] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1.584316] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.613622] hda_codec: ALC272: BIOS auto-probing. [ 1.619159] ALSA device list: [ 1.619165] #0: HDA Intel at 0x58200000 irq 11 [ 1.619171] GACT probability on [ 1.619174] Mirror/redirect action on [ 1.619178] Simple TC action Loaded [ 1.619796] netem: version 1.2 [ 1.619801] u32 classifier [ 1.619804] Performance counters on [ 1.619806] input device check on [ 1.619809] Actions configured [ 1.619816] Netfilter messages via NETLINK v0.30. [ 1.619848] nf_conntrack version 0.5.0 (15950 buckets, 63800 max) [ 1.620338] ctnetlink v0.93: registering with nfnetlink. [ 1.621889] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.621930] TCP cubic registered [ 1.621936] NET: Registered protocol family 17 [ 1.621960] Using IPI Shortcut mode [ 1.644491] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.646251] ata1.00: ATA-8: ST9160314AS, 0001SDM1, max UDMA/133 [ 1.646257] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.648508] ata1.00: configured for UDMA/133 [ 1.659621] scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0001 PQ: 0 ANSI: 5 [ 1.660253] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.660357] sd 0:0:0:0: [sda] Write Protect is off [ 1.660364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.660417] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.660702] sda: [ 1.660782] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.678170] sda1 sda2 sda3 < sda5 > [ 1.697396] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.862389] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 1.969365] ata2: SATA link down (SStatus 0 SControl 300) [ 2.017197] usb 1-4: configuration #1 chosen from 1 choice [ 2.018968] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 2.035730] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input1 [ 2.470262] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000 [ 2.537923] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 2.627199] EXT3-fs: mounted filesystem with ordered data mode. [ 2.627218] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.627244] Freeing unused kernel memory: 332k freed [ 2.627457] kjournald starting. Commit interval 5 seconds [ 3.319971] stty used greatest stack depth: 6224 bytes left [ 5.826805] ps used greatest stack depth: 6000 bytes left [ 7.347454] EXT3 FS on sda1, internal journal [ 8.219797] fuse init (API version 7.13) [ 13.365123] atl1c 0000:01:00.0: irq 20 for MSI/MSI-X [ 15.258506] kdm used greatest stack depth: 5992 bytes left [ 19.586229] kerneloops used greatest stack depth: 5800 bytes left [ 52.743617] wlan0: direct probe to AP 54:e6:fc:b2:d0:9e (try 1) [ 52.747875] wlan0: direct probe responded [ 52.747885] wlan0: authenticate with AP 54:e6:fc:b2:d0:9e (try 1) [ 52.749935] wlan0: authenticated [ 52.749968] wlan0: associate with AP 54:e6:fc:b2:d0:9e (try 1) [ 52.752989] wlan0: RX AssocResp from 54:e6:fc:b2:d0:9e (capab=0x431 status=0 aid=7) [ 52.752996] wlan0: associated
Ostatnio edytowany przez Pablik (2012-02-12 22:11:50)
Offline
#24 2012-02-12 22:11:03
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Klawisze funkcyjne i touchpad w jajku
dmesg z 3.0
Kod:
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.18 (root@Notebook) (gcc version 4.4.5 (Debian 4.4.5-8) ) #5 SMP PREEMPT Sun Feb 12 18:10:42 CET 2012 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f494000 (usable) [ 0.000000] BIOS-e820: 000000003f494000 - 000000003f4bf000 (reserved) [ 0.000000] BIOS-e820: 000000003f4bf000 - 000000003f578000 (usable) [ 0.000000] BIOS-e820: 000000003f578000 - 000000003f5bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f5bf000 - 000000003f5ed000 (usable) [ 0.000000] BIOS-e820: 000000003f5ed000 - 000000003f5ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f5ff000 - 000000003f600000 (usable) [ 0.000000] BIOS-e820: 000000003f600000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Acer AO532h /AO532h , BIOS V1.26 04/28/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3f600 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-through [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF00000 mask 0FFF00000 write-protect [ 0.000000] 1 base 000000000 mask 0E0000000 write-back [ 0.000000] 2 base 020000000 mask 0E0000000 write-back [ 0.000000] 3 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 3f5fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 3f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: DSDT 3f5f2000 07B21 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: FACS 3f586000 00040 [ 0.000000] ACPI: HPET 3f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 3f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 3f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SLIC 3f5f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 3f5f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT 3f5ee000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: WDAT 3f5ed000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f494 [ 0.000000] 0: 0x0003f4bf -> 0x0003f578 [ 0.000000] 0: 0x0003f5bf -> 0x0003f5ed [ 0.000000] 0: 0x0003f5ff -> 0x0003f600 [ 0.000000] On node 0 totalpages: 259339 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 31873 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @f6800000 s23744 r0 d21312 u2097152 [ 0.000000] pcpu-alloc: s23744 r0 d21312 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257310 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.18 root=/dev/sda1 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f600) [ 0.000000] Memory: 1019540k/1038336k available (5307k kernel code, 17816k reserved, 2559k data, 360k init, 128504k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc17af000 - 0xc1809000 ( 360 kB) [ 0.000000] .data : 0xc152ede2 - 0xc17aeb40 (2559 kB) [ 0.000000] .text : 0xc1000000 - 0xc152ede2 (5307 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] CPU 0 irqstacks, hard=f640c000 soft=f640e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.660 MHz processor. [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.32 BogoMIPS (lpj=1662660) [ 0.001014] pid_max: default: 32768 minimum: 301 [ 0.001121] Mount-cache hash table entries: 512 [ 0.001415] Initializing cgroup subsys net_cls [ 0.001440] Disabled fast string operations [ 0.001448] CPU: Physical Processor ID: 0 [ 0.001452] CPU: Processor Core ID: 0 [ 0.001457] mce: CPU supports 5 MCE banks [ 0.001470] using mwait in idle threads. [ 0.001559] ACPI: Core revision 20110413 [ 0.012086] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012482] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.022498] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a [ 0.022998] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.022998] ... version: 3 [ 0.022998] ... bit width: 40 [ 0.022998] ... generic registers: 2 [ 0.022998] ... value mask: 000000ffffffffff [ 0.022998] ... max period: 000000007fffffff [ 0.022998] ... fixed-purpose events: 3 [ 0.022998] ... event mask: 0000000700000003 [ 0.034037] CPU 1 irqstacks, hard=f64c6000 soft=f64c8000 [ 0.034043] Booting Node 0, Processors #1 Ok. [ 0.034050] smpboot cpu 1: start_ip = 9b000 [ 0.001999] Initializing CPU#1 [ 0.001999] Disabled fast string operations [ 0.106013] Brought up 2 CPUs [ 0.106021] Total of 2 processors activated (6650.46 BogoMIPS). [ 0.106454] devtmpfs: initialized [ 0.106745] kworker/u:0 used greatest stack depth: 7504 bytes left [ 0.107228] NET: Registered protocol family 16 [ 0.108200] ACPI: bus type pci registered [ 0.108401] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.108401] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.108401] PCI: Using MMCONFIG for extended config space [ 0.108401] PCI: Using configuration type 1 for base access [ 0.109311] kworker/u:0 used greatest stack depth: 7152 bytes left [ 0.127371] bio: create slab <bio-0> at 0 [ 0.130502] ACPI: EC: Look up EC in DSDT [ 0.133573] ACPI: Executed 1 blocks of module-level executable AML code [ 0.137127] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.137872] ACPI: SSDT 3f4b7c90 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.138593] ACPI: Dynamic OEM Table Load: [ 0.138601] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.138849] ACPI: SSDT 3f4b6e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.139564] ACPI: Dynamic OEM Table Load: [ 0.139572] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.145491] ACPI: SSDT 3f4b7f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.146194] ACPI: Dynamic OEM Table Load: [ 0.146202] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.146424] ACPI: SSDT 3f4b5f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.147110] ACPI: Dynamic OEM Table Load: [ 0.147117] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.154181] ACPI: Interpreter enabled [ 0.154192] ACPI: (supports S0 S3 S5) [ 0.154236] ACPI: Using IOAPIC for interrupt routing [ 0.288206] ACPI: Power Resource [FN00] (on) [ 0.289116] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.289236] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.290116] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353) [ 0.290134] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.290138] _OSC request data:1 8 1f [ 0.290149] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.291600] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.291608] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.291614] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.291622] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] [ 0.291646] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600 [ 0.291703] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300 [ 0.291719] pci 0000:00:02.0: reg 10: [mem 0x58180000-0x581fffff] [ 0.291729] pci 0000:00:02.0: reg 14: [io 0x60c0-0x60c7] [ 0.291739] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref] [ 0.291749] pci 0000:00:02.0: reg 1c: [mem 0x58000000-0x580fffff] [ 0.291796] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380 [ 0.291809] pci 0000:00:02.1: reg 10: [mem 0x58100000-0x5817ffff] [ 0.291924] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.291954] pci 0000:00:1b.0: reg 10: [mem 0x58200000-0x58203fff 64bit] [ 0.292115] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.292124] pci 0000:00:1b.0: PME# disabled [ 0.292160] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.292288] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.292296] pci 0000:00:1c.0: PME# disabled [ 0.292334] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.292462] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.292471] pci 0000:00:1c.1: PME# disabled [ 0.292514] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.292581] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f] [ 0.292636] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.292703] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f] [ 0.292759] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.292825] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f] [ 0.292879] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.292946] pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f] [ 0.293024] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.293056] pci 0000:00:1d.7: reg 10: [mem 0x58204400-0x582047ff] [ 0.293181] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.293190] pci 0000:00:1d.7: PME# disabled [ 0.293222] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.293334] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 [ 0.293494] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 [ 0.293524] pci 0000:00:1f.2: reg 10: [io 0x60b8-0x60bf] [ 0.293541] pci 0000:00:1f.2: reg 14: [io 0x60cc-0x60cf] [ 0.293558] pci 0000:00:1f.2: reg 18: [io 0x60b0-0x60b7] [ 0.293574] pci 0000:00:1f.2: reg 1c: [io 0x60c8-0x60cb] [ 0.293591] pci 0000:00:1f.2: reg 20: [io 0x60a0-0x60af] [ 0.293608] pci 0000:00:1f.2: reg 24: [mem 0x58204000-0x582043ff] [ 0.293675] pci 0000:00:1f.2: PME# supported from D3hot [ 0.293684] pci 0000:00:1f.2: PME# disabled [ 0.293711] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.293777] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f] [ 0.293927] pci 0000:01:00.0: [1969:1062] type 0 class 0x000200 [ 0.293980] pci 0000:01:00.0: reg 10: [mem 0x57000000-0x5703ffff 64bit] [ 0.294002] pci 0000:01:00.0: reg 18: [io 0x5000-0x507f] [ 0.294158] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.294168] pci 0000:01:00.0: PME# disabled [ 0.295995] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.296005] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.296014] pci 0000:00:1c.0: bridge window [mem 0x57000000-0x57ffffff] [ 0.296027] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref] [ 0.296132] pci 0000:02:00.0: [168c:002a] type 0 class 0x000280 [ 0.296170] pci 0000:02:00.0: reg 10: [mem 0x56000000-0x5600ffff 64bit] [ 0.296340] pci 0000:02:00.0: supports D1 [ 0.296345] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.296355] pci 0000:02:00.0: PME# disabled [ 0.296391] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.296409] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.296418] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.296427] pci 0000:00:1c.1: bridge window [mem 0x56000000-0x56ffffff] [ 0.296440] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref] [ 0.296537] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.296547] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.296557] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.296570] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.296577] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.296583] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.296589] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.296596] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode) [ 0.296624] pci_bus 0000:00: on NUMA node 0 [ 0.296632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.296937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.297060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.297333] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353) [ 0.297350] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.297354] _OSC request data:1 1f 1f [ 0.297363] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.297483] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353) [ 0.297499] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.297503] _OSC request data:1 0 1d [ 0.297512] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d [ 0.297517] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.304614] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.304747] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.304876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.305016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.305148] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.305277] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.305406] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.305535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.305959] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.306011] vgaarb: loaded [ 0.306015] vgaarb: bridge control possible 0000:00:02.0 [ 0.306406] SCSI subsystem initialized [ 0.306652] libata version 3.00 loaded. [ 0.306903] usbcore: registered new interface driver usbfs [ 0.307013] usbcore: registered new interface driver hub [ 0.307143] usbcore: registered new device driver usb [ 0.307665] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.307671] PCI: Using ACPI for IRQ routing [ 0.317841] PCI: pci_cache_line_size set to 64 bytes [ 0.317943] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.317950] reserve RAM buffer: 000000003f494000 - 000000003fffffff [ 0.317957] reserve RAM buffer: 000000003f578000 - 000000003fffffff [ 0.317966] reserve RAM buffer: 000000003f5ed000 - 000000003fffffff [ 0.317972] reserve RAM buffer: 000000003f600000 - 000000003fffffff [ 0.318645] cfg80211: Calling CRDA to update world regulatory domain [ 0.319040] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.322130] Switching to clocksource hpet [ 0.322307] pnp: PnP ACPI init [ 0.322327] ACPI: bus type pnp registered [ 0.322915] pnp 00:00: [bus 00-ff] [ 0.322924] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.322929] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.322935] pnp 00:00: [io 0x0d00-0xffff window] [ 0.322941] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.322947] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.322953] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.322958] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.322964] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.322970] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.322975] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.322981] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.322987] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.322992] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.322998] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.323019] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.323024] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.323030] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.323036] pnp 00:00: [mem 0x40000000-0xfebfffff window] [ 0.323219] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.383296] pnp 00:01: [io 0x0068] [ 0.383303] pnp 00:01: [io 0x006c] [ 0.383308] pnp 00:01: [io 0x164e-0x164f] [ 0.383313] pnp 00:01: [io 0x0061] [ 0.383318] pnp 00:01: [io 0x0070] [ 0.383322] pnp 00:01: [io 0x0080] [ 0.383327] pnp 00:01: [io 0x0092] [ 0.383332] pnp 00:01: [io 0x00b2-0x00b3] [ 0.383336] pnp 00:01: [io 0x0063] [ 0.383341] pnp 00:01: [io 0x0065] [ 0.383346] pnp 00:01: [io 0x0067] [ 0.383351] pnp 00:01: [io 0x0600-0x060f] [ 0.383356] pnp 00:01: [io 0x0610] [ 0.383361] pnp 00:01: [io 0x0800-0x080f] [ 0.383366] pnp 00:01: [io 0x0810-0x0817] [ 0.383371] pnp 00:01: [io 0x0400-0x047f] [ 0.383376] pnp 00:01: [io 0x0500-0x053f] [ 0.383381] pnp 00:01: [io 0xff2c-0xff2f] [ 0.383386] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.383392] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.383397] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.383402] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.383412] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.383417] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.383422] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.383615] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.383624] system 00:01: [io 0x0600-0x060f] has been reserved [ 0.383631] system 00:01: [io 0x0610] has been reserved [ 0.383637] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.383643] system 00:01: [io 0x0810-0x0817] has been reserved [ 0.383650] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.383656] system 00:01: [io 0x0500-0x053f] has been reserved [ 0.383663] system 00:01: [io 0xff2c-0xff2f] has been reserved [ 0.383671] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.383685] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.383692] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.383699] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.383706] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.383713] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.383720] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.383728] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.383756] pnp 00:02: [io 0x0000-0x001f] [ 0.383761] pnp 00:02: [io 0x0081-0x0091] [ 0.383766] pnp 00:02: [io 0x0093-0x009f] [ 0.383771] pnp 00:02: [io 0x00c0-0x00df] [ 0.383777] pnp 00:02: [dma 4] [ 0.383892] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.383951] pnp 00:03: [io 0x0070-0x0077] [ 0.384091] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.384237] pnp 00:04: [irq 0 disabled] [ 0.384256] pnp 00:04: [irq 8] [ 0.384261] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.384383] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.384415] pnp 00:05: [io 0x00f0] [ 0.384426] pnp 00:05: [irq 13] [ 0.384542] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.384570] pnp 00:06: [mem 0xff800000-0xffffffff] [ 0.384691] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 0.384770] pnp 00:07: [io 0x0060] [ 0.384776] pnp 00:07: [io 0x0064] [ 0.384788] pnp 00:07: [irq 1] [ 0.384906] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.385036] pnp 00:08: [irq 12] [ 0.385165] pnp 00:08: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active) [ 0.385468] pnp: PnP ACPI: found 9 devices [ 0.385473] ACPI: ACPI bus type pnp unregistered [ 0.392265] kworker/u:0 used greatest stack depth: 6908 bytes left [ 0.428521] PCI: max bus depth: 1 pci_try_num: 2 [ 0.428570] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.428579] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.428590] pci 0000:00:1c.0: bridge window [mem 0x57000000-0x57ffffff] [ 0.428600] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref] [ 0.428612] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.428619] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.428630] pci 0000:00:1c.1: bridge window [mem 0x56000000-0x56ffffff] [ 0.428639] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref] [ 0.428652] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.428656] pci 0000:00:1e.0: bridge window [io disabled] [ 0.428666] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.428674] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.428709] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.428720] pci 0000:00:1c.0: setting latency timer to 64 [ 0.428737] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.428747] pci 0000:00:1c.1: setting latency timer to 64 [ 0.428760] pci 0000:00:1e.0: setting latency timer to 64 [ 0.428769] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.428775] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.428781] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.428787] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff] [ 0.428793] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.428799] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff] [ 0.428806] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref] [ 0.428812] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.428818] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff] [ 0.428824] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref] [ 0.428831] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.428837] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.428843] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.428849] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff] [ 0.428931] NET: Registered protocol family 2 [ 0.429084] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.429558] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430531] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.430965] TCP: Hash tables configured (established 131072 bind 65536) [ 0.430972] TCP reno registered [ 0.430980] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.431000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.431259] NET: Registered protocol family 1 [ 0.431443] RPC: Registered named UNIX socket transport module. [ 0.431449] RPC: Registered udp transport module. [ 0.431454] RPC: Registered tcp transport module. [ 0.431457] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.431481] pci 0000:00:02.0: Boot video device [ 0.431741] PCI: CLS 64 bytes, default 64 [ 0.431777] Simple Boot Flag at 0x44 set to 0x1 [ 0.433656] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107 [ 0.433670] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107 [ 0.433778] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.438186] highmem bounce pool size: 64 pages [ 0.438198] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.448151] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.448905] msgmni has been set to 1740 [ 0.451443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.451451] io scheduler noop registered [ 0.451487] io scheduler cfq registered (default) [ 0.451692] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.451765] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.451935] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.452081] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.573139] ACPI: AC Adapter [AC] (on-line) [ 0.573421] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.573432] ACPI: Power Button [PWRB] [ 0.573580] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.573589] ACPI: Sleep Button [SLPB] [ 0.573738] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.573786] ACPI: Lid Switch [LID0] [ 0.573961] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.573970] ACPI: Power Button [PWRF] [ 0.574236] ACPI: Fan [FAN] (on) [ 0.574328] ACPI: acpi_idle registered with cpuidle [ 0.574744] Marking TSC unstable due to TSC halts in idle [ 0.639312] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.639319] ACPI: Thermal Zone [THRM] (53 C) [ 0.655902] Linux agpgart interface v0.103 [ 0.655980] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 0.656293] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.656642] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.656948] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 0.657117] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.657123] Hangcheck: Using getrawmonotonic(). [ 0.657248] [drm] Initialized drm 1.1.0 20060810 [ 0.657286] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.657295] i915 0000:00:02.0: setting latency timer to 64 [ 0.723524] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 0.723535] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.723539] [drm] Driver supports precise vblank timestamp query. [ 0.723618] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.052295] [drm] initialized overlay support [ 1.071542] fbcon: inteldrmfb (fb0) is primary device [ 1.109558] fixme: max PWM is zero. [ 1.123574] Console: switching to colour frame buffer device 128x37 [ 1.129768] fb0: inteldrmfb frame buffer device [ 1.129773] drm: registered panic notifier [ 1.212261] ACPI: Battery Slot [BAT0] (battery present) [ 1.433136] acpi device:28: registered as cooling_device3 [ 1.433522] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.433536] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 1.433634] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.435932] loop: module loaded [ 1.436598] ahci 0000:00:1f.2: version 3.0 [ 1.436624] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.436698] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 1.436759] ahci: SSS flag set, parallel bus scan disabled [ 1.436807] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.436816] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.436826] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.438535] scsi0 : ahci [ 1.438842] scsi1 : ahci [ 1.439223] scsi2 : ahci [ 1.439463] scsi3 : ahci [ 1.439931] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 43 [ 1.439940] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 43 [ 1.439945] ata3: DUMMY [ 1.439949] ata4: DUMMY [ 1.440235] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.440254] atl1c 0000:01:00.0: setting latency timer to 64 [ 1.511773] atl1c 0000:01:00.0: version 1.0.1.0-NAPI [ 1.512601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.512638] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.512673] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.512681] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.512731] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.512772] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.512791] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.516675] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.516711] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58204400 [ 1.526026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.526452] hub 1-0:1.0: USB hub found [ 1.526464] hub 1-0:1.0: 8 ports detected [ 1.526664] uhci_hcd: USB Universal Host Controller Interface driver [ 1.526733] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.526748] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.526755] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.526773] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.526815] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080 [ 1.527276] hub 2-0:1.0: USB hub found [ 1.527287] hub 2-0:1.0: 2 ports detected [ 1.527392] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.527406] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.527413] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.527433] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.527492] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060 [ 1.527903] hub 3-0:1.0: USB hub found [ 1.527914] hub 3-0:1.0: 2 ports detected [ 1.528051] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.528065] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.528072] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.528090] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.528146] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 [ 1.528562] hub 4-0:1.0: USB hub found [ 1.528573] hub 4-0:1.0: 2 ports detected [ 1.528684] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.528697] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.528704] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.528721] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.528777] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020 [ 1.529220] hub 5-0:1.0: USB hub found [ 1.529232] hub 5-0:1.0: 2 ports detected [ 1.529406] Initializing USB Mass Storage driver... [ 1.529535] usbcore: registered new interface driver usb-storage [ 1.529541] USB Mass Storage support registered. [ 1.529665] usbcore: registered new interface driver libusual [ 1.529876] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 1.553825] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.553895] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.554446] mousedev: PS/2 mouse device common for all mice [ 1.555832] rtc_cmos 00:03: RTC can wake from S4 [ 1.556105] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.556148] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.556228] i2c /dev entries driver [ 1.558140] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.558631] lirc_dev: IR Remote Control driver registered, major 252 [ 1.558638] IR NEC protocol handler initialized [ 1.558642] IR RC5(x) protocol handler initialized [ 1.558645] IR RC6 protocol handler initialized [ 1.558649] IR JVC protocol handler initialized [ 1.558652] IR Sony protocol handler initialized [ 1.558656] IR RC5 (streamzap) protocol handler initialized [ 1.558660] IR LIRC bridge handler initialized [ 1.558663] Linux video capture interface: v2.00 [ 1.558742] gspca: v2.13.0 registered [ 1.558844] usbcore: registered new interface driver uvcvideo [ 1.558849] USB Video Class driver (v1.1.0) [ 1.559493] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 1.559954] cpuidle: using governor ladder [ 1.563231] usbcore: registered new interface driver usbhid [ 1.563238] usbhid: USB HID core driver [ 1.563532] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.563622] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 1.563667] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1.575915] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.579853] hda_codec: ALC272X: BIOS auto-probing. [ 1.583441] ALSA device list: [ 1.583447] #0: HDA Intel at 0x58200000 irq 44 [ 1.583453] GACT probability on [ 1.583460] Mirror/redirect action on [ 1.583464] Simple TC action Loaded [ 1.584170] netem: version 1.3 [ 1.584176] u32 classifier [ 1.584179] Performance counters on [ 1.584182] input device check on [ 1.584186] Actions configured [ 1.584194] Netfilter messages via NETLINK v0.30. [ 1.584226] nf_conntrack version 0.5.0 (15930 buckets, 63720 max) [ 1.584642] ctnetlink v0.93: registering with nfnetlink. [ 1.585642] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.585722] TCP cubic registered [ 1.585729] NET: Registered protocol family 17 [ 1.585756] Using IPI No-Shortcut mode [ 1.750076] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.750956] ata1.00: unexpected _GTF length (4) [ 1.798537] ata1.00: ATA-8: ST9160314AS, 0001SDM1, max UDMA/133 [ 1.798552] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.800292] ata1.00: unexpected _GTF length (4) [ 1.800633] ata1.00: configured for UDMA/133 [ 1.800883] scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0001 PQ: 0 ANSI: 5 [ 1.801447] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.801625] sd 0:0:0:0: [sda] Write Protect is off [ 1.801635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.801715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.801764] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.823271] sda: sda1 sda2 sda3 < sda5 > [ 1.824426] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.832085] usb 1-4: new high speed USB device number 2 using ehci_hcd [ 1.988832] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 2.005657] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input6 [ 2.109088] ata2: SATA link down (SStatus 0 SControl 300) [ 2.806554] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 2.894617] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.974357] EXT3-fs: barriers not enabled [ 2.985303] kjournald starting. Commit interval 5 seconds [ 2.985387] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 2.985407] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.985488] Freeing unused kernel memory: 360k freed [ 3.498904] modprobe used greatest stack depth: 6388 bytes left [ 3.718153] stty used greatest stack depth: 5924 bytes left [ 6.176794] ps used greatest stack depth: 5920 bytes left [ 8.562310] EXT3-fs (sda1): using internal journal [ 9.462188] fuse init (API version 7.16) [ 12.350413] rc used greatest stack depth: 5404 bytes left [ 14.692820] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [ 19.832685] sshd (2601): /proc/2601/oom_adj is deprecated, please use /proc/2601/oom_score_adj instead.
[quote=NIC]PS 2. Wypróbuj kernel 3.2[/quote]
Chodzi mi o to żeby max było do 3.0.18 boo imq jest narazie tylko do 3.0.18 .
Jak ten scrollbar działa na 2.6 to musi na 3.0 ;(
Offline
#25 2012-02-12 22:32:12
NIC - Członek DUG
Re: Klawisze funkcyjne i touchpad w jajku
Różnica w capabilitisach...
Kod:
2.6 [ 2.470262] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000 3.0 [ 2.806554] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
.. raczej winna tutaj być na plus dla 3.0.
Próbowałeś tego "skryptu"? Wykonaj w konsolce.
Kod:
# higher sensitivity synclient FingerLow=9 FingerHigh=12 # faster movements synclient MinSpeed=2.0 MaxSpeed=3.5 AccelFactor=0.1 # 2 fingers scroll synclient VertTwoFingerScroll=1 HorizTwoFingerScroll=1 # faster coasting synclient CoastingSpeed=10 CoastingFriction=25 # enable tap to click (2 fingers for middle click, 3 fingers for right click) synclient TapButton1=1 TapButton2=3 TapButton3=2 # faster tap and double tap synclient FastTaps=1 MaxDoubleTapTime=100 # continue dragging movement when reaching the edge of the touchpad synclient EdgeMotionMinZ=30 EdgeMotionMaxZ=40 EdgeMotionMinSpeed=100 EdgeMotionMaxSpeed=400
Zwróć uwagę że napisano tam "2 fingers scroll" <-- użyj dwóch palców... czort wie jak, ale użyj :) (pewnie zbliżając i oddalając palce do siebie)
A teraz analiza co to za capability doszedł:
0x02 - czyli... uwaga... SYN_CAP_MULTIFINGER... Czyli właśnie dwupalczasty scroll.. (a nawet trójpalczasty widzę po kodzie może być...)
Zobacz sobie "man synaptics" i tu masz więcej tych opcji do konfiguracji programem: "synclient"
Chyba interesuje cię:
Kod:
synclient VertEdgeScroll=1 synclient HorizEdgeScroll=1
Ostatnio edytowany przez NIC (2012-02-12 22:42:02)
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00013 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00201 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.145.91.37' WHERE u.id=1 |
| 0.00113 | UPDATE punbb_online SET logged=1716090351 WHERE ident='3.145.91.37' |
| 0.00039 | SELECT * FROM punbb_online WHERE logged<1716090051 |
| 0.00104 | DELETE FROM punbb_online WHERE ident='47.128.32.9' |
| 0.00075 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=20563 AND t.moved_to IS NULL |
| 0.00033 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00294 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=20563 ORDER BY p.id LIMIT 0,25 |
| 0.00116 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=20563 |
| Total query time: 0.00992 s | |