Forum Debian Users Gang

root@debian:/home/ilin# modinfo ath9k_htc 
filename:       /lib/modules/3.2.0-1.dmz.4-liquorix-686/kernel/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
firmware:       htc_9271.fw
firmware:       htc_7010.fw
description:    Atheros driver 802.11n HTC based wireless devices
license:        Dual BSD/GPL
author:         Atheros Communications
alias:          usb:v0CF3p20FFd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0411p017Fd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v083ApA704d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0846p9018d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p7010d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1668p1200d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p7015d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v057Cp8403d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3pB003d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v040Dp3801d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v04CAp4605d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3350d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3349d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3348d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3346d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3328d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3327d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07D1p3A10d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0846p9030d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p1006d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p9271d*dc*dsc*dp*ic*isc*ip*
depends:        ath9k_hw,ath9k_common,mac80211,ath,cfg80211
intree:         Y
vermagic:       3.2.0-1.dmz.4-liquorix-686 SMP preempt mod_unload modversions 686 
parm:           debug:Debugging mask (uint)
parm:           nohwcrypt:Disable hardware encryption (int)

root@debian:~# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:02:3f:21:e2:71  
          inet addr:192.168.1.34  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::202:3fff:fe21:e271/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1000 (1000.0 B)  TX bytes:7426 (7.2 KiB)
          Interrupt:10 Base address:0xa000 

irda0     Link encap:IrLAP  HWaddr 00:00:00:00  
          NOARP  MTU:2048  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:8 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:7 Base address:0x2f8 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:560 (560.0 B)  TX bytes:560 (560.0 B)

pan0      Link encap:Ethernet  HWaddr 4e:2f:2b:b8:f9:8e  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@debian:~# modprobe ath9k_htc
root@debian:~#

root@debian:~# modinfo ath9k_htc
filename:       /lib/modules/2.6.32-5-686/updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
firmware:       htc_9271.fw
firmware:       htc_7010.fw
description:    Atheros driver 802.11n HTC based wireless devices
license:        Dual BSD/GPL
author:         Atheros Communications
alias:          usb:v0CF3p20FFd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0411p017Fd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v083ApA704d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0846p9018d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p7010d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1668p1200d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p7015d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v057Cp8403d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3pB003d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v040Dp3801d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v04CAp4605d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3350d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3349d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3348d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3346d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3328d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3327d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07D1p3A10d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0846p9030d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p1006d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p9271d*dc*dsc*dp*ic*isc*ip*
depends:        ath9k_hw,compat_firmware_class,ath9k_common,mac80211,led-class,ath,usbcore,cfg80211,compat
vermagic:       2.6.32-5-686 SMP mod_unload modversions 686 
parm:           debug:Debugging mask (uint)
parm:           nohwcrypt:Disable hardware encryption (int)
root@debian:~#

[    0.040328] PCI: Using configuration type 1 for base access
[    0.040800] bio: create slab <bio-0> at 0
[    0.041496] ACPI: EC: Look up EC in DSDT
[    0.049731] ACPI: EC: GPE storm detected, transactions will use polling mode
[    0.212030] ACPI: Interpreter enabled
[    0.212037] ACPI: (supports S0 S3 S4 S5)
[    0.212059] ACPI: Using PIC for interrupt routing
[    0.288024] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.288196] ACPI: Power Resource [C18D] (on)
[    0.288347] ACPI: Power Resource [C195] (on)
[    0.288487] ACPI: Power Resource [C19C] (on)
[    0.288525] ACPI: Power Resource [C1A6] (on)
[    0.288697] ACPI: No dock devices found.
[    0.293953] ACPI: PCI Root Bridge [C046] (0000:00)
[    0.294008] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xb0000000-0xbfffffff]
[    0.294124] pci 0000:00:1d.0: reg 20 io port: [0x48c0-0x48df]
[    0.294177] pci 0000:00:1d.1: reg 20 io port: [0x48e0-0x48ff]
[    0.294231] pci 0000:00:1d.2: reg 20 io port: [0x4c00-0x4c1f]
[    0.294292] pci 0000:00:1d.7: reg 10 32bit mmio: [0xa0000000-0xa00003ff]
[    0.294349] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.294355] pci 0000:00:1d.7: PME# disabled
[    0.294447] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    0.294453] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
[    0.294478] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.294486] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.294493] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.294501] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.294509] pci 0000:00:1f.1: reg 20 io port: [0x4c40-0x4c4f]
[    0.294517] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.294568] pci 0000:00:1f.3: reg 20 io port: [0x4c20-0x4c3f]
[    0.294612] pci 0000:00:1f.5: reg 10 io port: [0x4000-0x40ff]
[    0.294620] pci 0000:00:1f.5: reg 14 io port: [0x4880-0x48bf]
[    0.294627] pci 0000:00:1f.5: reg 18 32bit mmio: [0xa0200000-0xa02001ff]
[    0.294635] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xa0300000-0xa03000ff]
[    0.294664] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.294669] pci 0000:00:1f.5: PME# disabled
[    0.294700] pci 0000:00:1f.6: reg 10 io port: [0x4400-0x44ff]
[    0.294708] pci 0000:00:1f.6: reg 14 io port: [0x4800-0x487f]
[    0.294744] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.294749] pci 0000:00:1f.6: PME# disabled
[    0.294786] pci 0000:01:00.0: reg 10 32bit mmio pref: [0x98000000-0x9fffffff]
[    0.294793] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[    0.294800] pci 0000:01:00.0: reg 18 32bit mmio: [0x90400000-0x9040ffff]
[    0.294815] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.294835] pci 0000:01:00.0: supports D1 D2
[    0.294874] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[    0.294879] pci 0000:00:01.0: bridge 32bit mmio: [0x90400000-0x904fffff]
[    0.294883] pci 0000:00:01.0: bridge 32bit mmio pref: [0x98000000-0x9fffffff]
[    0.294919] pci 0000:02:00.0: reg 10 32bit mmio: [0x90200000-0x902007ff]
[    0.294927] pci 0000:02:00.0: reg 14 io port: [0x2400-0x247f]
[    0.294966] pci 0000:02:00.0: supports D2
[    0.294969] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[    0.294974] pci 0000:02:00.0: PME# disabled
[    0.295012] pci 0000:02:01.0: reg 10 io port: [0x2000-0x20ff]
[    0.295020] pci 0000:02:01.0: reg 14 32bit mmio: [0x90300000-0x903000ff]
[    0.295058] pci 0000:02:01.0: supports D1 D2
[    0.295061] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.295066] pci 0000:02:01.0: PME# disabled
[    0.295103] pci 0000:02:02.0: reg 10 32bit mmio: [0x90000000-0x90000fff]
[    0.295182] pci 0000:02:04.0: reg 10 32bit mmio: [0x90100000-0x90100fff]
[    0.295201] pci 0000:02:04.0: supports D1 D2
[    0.295204] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.295209] pci 0000:02:04.0: PME# disabled
[    0.295250] pci 0000:00:1e.0: transparent bridge
[    0.295255] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[    0.295260] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x903fffff]
[    0.295288] pci_bus 0000:00: on NUMA node 0
[    0.295293] ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
[    0.295355] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
[    0.295381] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT]
[    0.306805] ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10)
[    0.306998] ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10)
[    0.307188] ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10)
[    0.307378] ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10)
[    0.307562] ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled.
[    0.307754] ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11
[    0.307933] ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled.
[    0.308134] ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10)
[    0.308295] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.308300] vgaarb: loaded
[    0.308386] PCI: Using ACPI for IRQ routing
[    0.308573] Switching to clocksource tsc
[    0.310308] pnp: PnP ACPI init
[    0.310323] ACPI: bus type pnp registered
[    0.320078] pnp: PnP ACPI: found 15 devices
[    0.320081] ACPI: ACPI bus type pnp unregistered
[    0.320086] PnPBIOS: Disabled by ACPI PNP
[    0.320098] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.320103] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.320107] system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
[    0.320118] system 00:0c: ioport range 0x140-0x14f has been reserved
[    0.320122] system 00:0c: ioport range 0x200-0x20f has been reserved
[    0.320127] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.320131] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[    0.320138] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[    0.320142] system 00:0d: ioport range 0x1000-0x107f has been reserved
[    0.320146] system 00:0d: ioport range 0x1100-0x113f has been reserved
[    0.320150] system 00:0d: ioport range 0x1200-0x121f has been reserved
[    0.320154] system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved
[    0.320161] system 00:0e: iomem range 0xfec01000-0xfec01fff has been reserved
[    0.354929] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.354934] pci 0000:00:01.0:   IO window: 0x3000-0x3fff
[    0.354939] pci 0000:00:01.0:   MEM window: 0x90400000-0x904fffff
[    0.354943] pci 0000:00:01.0:   PREFETCH window: 0x98000000-0x9fffffff
[    0.354952] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[    0.354955] pci 0000:02:04.0:   IO window: 0x002800-0x0028ff
[    0.354960] pci 0000:02:04.0:   IO window: 0x002c00-0x002cff
[    0.354966] pci 0000:02:04.0:   PREFETCH window: 0x60000000-0x63ffffff
[    0.354971] pci 0000:02:04.0:   MEM window: 0x68000000-0x6bffffff
[    0.354976] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.354980] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    0.354987] pci 0000:00:1e.0:   MEM window: 0x90000000-0x903fffff
[    0.354992] pci 0000:00:1e.0:   PREFETCH window: 0x60000000-0x63ffffff
[    0.355011] pci 0000:00:1e.0: setting latency timer to 64
[    0.355300] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5
[    0.355303] PCI: setting IRQ 5 as level-triggered
[    0.355309] pci 0000:02:04.0: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[    0.355317] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.355321] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.355325] pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
[    0.355328] pci_bus 0000:01: resource 1 mem: [0x90400000-0x904fffff]
[    0.355332] pci_bus 0000:01: resource 2 pref mem [0x98000000-0x9fffffff]
[    0.355336] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.355339] pci_bus 0000:02: resource 1 mem: [0x90000000-0x903fffff]
[    0.355343] pci_bus 0000:02: resource 2 pref mem [0x60000000-0x63ffffff]
[    0.355347] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.355350] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.355354] pci_bus 0000:03: resource 0 io:  [0x2800-0x28ff]
[    0.355357] pci_bus 0000:03: resource 1 io:  [0x2c00-0x2cff]
[    0.355361] pci_bus 0000:03: resource 2 pref mem [0x60000000-0x63ffffff]
[    0.355364] pci_bus 0000:03: resource 3 mem: [0x68000000-0x6bffffff]
[    0.355420] NET: Registered protocol family 2
[    0.355540] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.356001] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.357560] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.358539] TCP: Hash tables configured (established 131072 bind 65536)
[    0.358544] TCP reno registered
[    0.358697] NET: Registered protocol family 1
[    0.358808] pci 0000:01:00.0: Boot video device
[    0.358898] Unpacking initramfs...
[    0.689635] Freeing initrd memory: 8455k freed
[    0.701950] audit: initializing netlink socket (disabled)
[    0.701974] type=2000 audit(1329844862.699:1): initialized
[    0.707405] highmem bounce pool size: 64 pages
[    0.707413] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.709556] VFS: Disk quotas dquot_6.5.2
[    0.709635] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.709745] msgmni has been set to 1731
[    0.709989] alg: No test for stdrng (krng)
[    0.710062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.710066] io scheduler noop registered
[    0.710069] io scheduler anticipatory registered
[    0.710071] io scheduler deadline registered
[    0.710131] io scheduler cfq registered (default)
[    0.710353] isapnp: Scanning for PnP cards...
[    1.064064] isapnp: No Plug & Play device found
[    1.065778] Linux agpgart interface v0.103
[    1.065858] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[    1.079261] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.079351] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.079452] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.079597] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    1.079851] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.080427] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
[    1.080431] PCI: setting IRQ 10 as level-triggered
[    1.080437] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    1.080445] serial 0000:00:1f.6: PCI INT B disabled
[    1.080551] PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12
[    1.089302] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.096487] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.096497] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.096532] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.096557] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.096587] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.096689] mice: PS/2 mouse device common for all mice
[    1.096956] rtc_cmos 00:09: RTC can wake from S4
[    1.097004] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    1.097022] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    1.097039] cpuidle: using governor ladder
[    1.097042] cpuidle: using governor menu
[    1.097047] No iBFT detected.
[    1.097563] TCP cubic registered
[    1.097771] NET: Registered protocol family 10
[    1.098818] Mobile IPv6
[    1.098822] NET: Registered protocol family 17
[    1.098841] Using IPI No-Shortcut mode
[    1.098921] PM: Resume from disk failed.
[    1.098933] registered taskstats version 1
[    1.099208] rtc_cmos 00:09: setting system clock to 2012-02-21 17:21:03 UTC (1329844863)
[    1.099263] Initalizing network drop monitor service
[    1.099287] Freeing unused kernel memory: 380k freed
[    1.099526] Write protecting the kernel text: 2508k
[    1.099552] Write protecting the kernel read-only data: 920k
[    1.120143] udev[46]: starting version 164
[    1.120835] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.399676] SCSI subsystem initialized
[    1.422553] usbcore: registered new interface driver usbfs
[    1.422711] usbcore: registered new interface driver hub
[    1.428864] usbcore: registered new device driver usb
[    1.458206] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    1.458209] wbsd: Copyright(c) Pierre Ossman
[    1.459025] wbsd 00:02: activated
[    1.504933] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.505308] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5
[    1.505313] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 5 (level, low) -> IRQ 5
[    1.505338] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.505342] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.505380] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.505424] ehci_hcd 0000:00:1d.7: debug port 1
[    1.509307] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.509485] mmc0: W83L51xD id 7112 at 0x248 irq 6 dma 0 PnP
[    1.509718] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000
[    1.519144] libata version 3.00 loaded.
[    1.522550] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.522592] 8139cp 0000:02:01.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    1.526712] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.526761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.526765] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.526769] usb usb1: Product: EHCI Host Controller
[    1.526772] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.526775] usb usb1: SerialNumber: 0000:00:1d.7
[    1.526882] usb usb1: configuration #1 chosen from 1 choice
[    1.526922] hub 1-0:1.0: USB hub found
[    1.526933] hub 1-0:1.0: 6 ports detected
[    1.535025] eth0: RTL-8139C+ at 0xf7e1a000, 00:02:3f:21:e2:71, IRQ 10
[    1.535772] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[    1.535778] firewire_ohci 0000:02:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[    1.544831] ata_piix 0000:00:1f.1: version 2.13
[    1.544849] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.544857] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[    1.544907] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.545991] scsi0 : ata_piix
[    1.546676] scsi1 : ata_piix
[    1.547695] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c40 irq 14
[    1.547700] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4c48 irq 15
[    1.550093] 8139too Fast Ethernet driver 0.9.28
[    1.616022] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI version 1.0
[    1.623812] uhci_hcd: USB Universal Host Controller Interface driver
[    1.623880] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[    1.623891] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.623896] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.623912] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.623940] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0
[    1.623999] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.624002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.624029] usb usb2: Product: UHCI Host Controller
[    1.624032] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.624035] usb usb2: SerialNumber: 0000:00:1d.0
[    1.624223] usb usb2: configuration #1 chosen from 1 choice
[    1.624303] hub 2-0:1.0: USB hub found
[    1.624314] hub 2-0:1.0: 2 ports detected
[    1.624704] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5
[    1.624709] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[    1.624716] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.624720] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.624731] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.624754] uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0
[    1.624799] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.624802] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.624806] usb usb3: Product: UHCI Host Controller
[    1.624808] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.624811] usb usb3: SerialNumber: 0000:00:1d.1
[    1.624942] usb usb3: configuration #1 chosen from 1 choice
[    1.625017] hub 3-0:1.0: USB hub found
[    1.625026] hub 3-0:1.0: 2 ports detected
[    1.625084] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[    1.625092] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.625096] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.625104] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.625126] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00
[    1.625169] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.625173] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.625176] usb usb4: Product: UHCI Host Controller
[    1.625179] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.625182] usb usb4: SerialNumber: 0000:00:1d.2
[    1.625303] usb usb4: configuration #1 chosen from 1 choice
[    1.625378] hub 4-0:1.0: USB hub found
[    1.625386] hub 4-0:1.0: 2 ports detected
[    1.712616] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
[    1.712876] ata1.00: ATA-6: WDC WD800VE-07HDT0, 09.07D09, max UDMA/100
[    1.712880] ata1.00: 156301488 sectors, multi 16: LBA 
[    1.728453] ata2.00: configured for UDMA/33
[    1.728678] ata1.00: configured for UDMA/100
[    1.728832] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800VE-07HD 09.0 PQ: 0 ANSI: 5
[    1.731303] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.40 PQ: 0 ANSI: 5
[    1.764714] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.764776] sd 0:0:0:0: [sda] Write Protect is off
[    1.764780] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.764806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.764969]  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.770237] Uniform CD-ROM driver Revision: 3.20
[    1.770545] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.821593]  sda1 sda2 sda3 sda4
[    1.822223] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.836078] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    1.840212] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.840654] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.984972] usb 1-5: New USB device found, idVendor=0cf3, idProduct=9271
[    1.984978] usb 1-5: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[    1.984981] usb 1-5: Product: USB2.0 WLAN
[    1.984984] usb 1-5: Manufacturer: ATHEROS
[    1.984987] usb 1-5: SerialNumber: 12345
[    1.985111] usb 1-5: configuration #1 chosen from 1 choice
[    2.116579] firewire_core: created device fw0: GUID 00023f444a0065e2, S400
[    2.506214] EXT4-fs (sda4): mounted filesystem with ordered data mode
[    4.564158] udev[332]: starting version 164
[    5.095144] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    5.095154] ACPI: Power Button [C1BE]
[    5.095232] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    5.095344] ACPI: Lid Switch [C136]
[    5.095419] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.095424] ACPI: Power Button [PWRF]
[    5.177969] NET: Registered protocol family 23
[    5.244951] Detected unconfigured Compaq x1000 family SMSC IrDA chip, pre-configuring device.
[    5.244956] Setting up Intel 82801 controller and SMSC device
[    5.245086] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[    5.245102] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x0e
[    5.245116] SMsC IrDA Controller found
[    5.245117]  IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[    5.245184] No transceiver found. Defaulting to Fast pin select
[    5.246764] IrDA: Registered device irda0
[    5.260247] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.406081] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    5.412200] ACPI: AC Adapter [C134] (on-line)
[    5.430254] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input5
[    5.430374] ACPI: Video Device [C0D0] (multi-head: yes  rom: no  post: no)
[    5.432378] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.538137] Marking TSC unstable due to TSC halts in idle
[    5.539248] processor LNXCPU:00: registered as cooling_device0
[    5.539501] Switching to clocksource acpi_pm
[    5.956313] ACPI: Battery Slot [C11F] (battery present)
[    6.078636] i801_smbus 0000:00:1f.3: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    6.079410] intel_rng: FWH not detected
[    6.227047] parport_pc 00:05: reported by Plug and Play ACPI
[    6.227096] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    6.486318] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0
[    6.542796] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[    7.088833] [drm] Initialized drm 1.1.0 20060810
[    7.096379] lib80211: common routines for IEEE802.11 drivers
[    7.096384] lib80211_crypt: registered algorithm 'NULL'
[    7.207917] Compat-wireless backport release: compat-wireless-2012-01-16-3-gadea9d0
[    7.207921] Backport based on linux-next.git next-20120118
[    7.237780] yenta_cardbus 0000:02:04.0: CardBus bridge found [0e11:0860]
[    7.237799] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[    7.237802] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[    7.237808] yenta_cardbus 0000:02:04.0: TI: mfunc 0x001c1112, devctl 0x44
[    7.247853] ieee80211: 802.11 data/management/control stack, git-1.1.13
[    7.247857] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[    7.414568] cfg80211: Calling CRDA to update world regulatory domain
[    7.418187] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[    7.418191] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[    7.468757] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0818, PCI irq 5
[    7.468762] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[    7.468767] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[    7.468778] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[    7.468783] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[    7.469077] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff
[    7.469081] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
[    7.472137] ipw2100 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[    7.472803] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[    7.472821] ipw2100 0000:02:02.0: firmware: requesting ipw2100-1.3.fw
[    7.660241] ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed.
[    7.660289] ipw2100: eth1: ipw2100_get_firmware failed: -2
[    7.660352] ipw2100: eth1: Failed to power on the adapter.
[    7.660391] ipw2100: eth1: Failed to start the firmware.
[    7.660430] ipw2100Error calling register_netdev.
[    7.661101] ipw2100 0000:02:02.0: PCI INT A disabled
[    7.661111] ipw2100: probe of 0000:02:02.0 failed with error -5
[    7.975618] [drm] radeon kernel modesetting enabled.
[    7.975701] radeon 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[    7.979668] [drm] radeon: Initializing kernel modesetting.
[    7.979811] [drm] register mmio base: 0x90400000
[    7.979814] [drm] register mmio size: 65536
[    7.980601] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    7.980627] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[    7.980646] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[    7.980684] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[    7.980710] [drm] radeon: VRAM 64M
[    7.980712] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[    7.980714] [drm] radeon: GTT 256M
[    7.980717] [drm] radeon: GTT from 0xB0000000 to 0xBFFFFFFF
[    7.980748] [drm] radeon: irq initialized.
[    7.981364] [drm] Detected VRAM RAM=64M, BAR=128M
[    7.981369] [drm] RAM width 128bits DDR
[    7.981468] [TTM] Zone  kernel: Available graphics memory: 443532 kiB.
[    7.981471] [TTM] Zone highmem: Available graphics memory: 777264 kiB.
[    7.981498] [drm] radeon: 64M of VRAM memory ready
[    7.981501] [drm] radeon: 256M of GTT memory ready.
[    7.981744] [drm] radeon: cp idle (0x02000603)
[    7.981792] [drm] Loading R200 Microcode
[    7.982240] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[    7.985738] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[    7.985783] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[    7.985823] radeon 0000:01:00.0: failled initializing CP (-2).
[    7.985862] radeon 0000:01:00.0: Disabling GPU acceleration
[    7.985904] [drm] radeon: cp finalized
[    7.986117] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    7.986121] [drm] radeon: cp finalized
[    7.986378] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[    7.986384] [TTM] Zone highmem: Used memory at exit: 0 kiB.
[    7.986388] [drm] radeon: ttm finalized
[    7.986393] [drm] Forcing AGP to PCI mode
[    7.987074] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    7.987089] [drm] radeon: VRAM 128M
[    7.987092] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[    7.987094] [drm] radeon: GTT 512M
[    7.987097] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[    7.987114] [drm] radeon: irq initialized.
[    7.987122] [drm] Detected VRAM RAM=128M, BAR=128M
[    7.987125] [drm] RAM width 128bits DDR
[    7.987796] [TTM] Zone  kernel: Available graphics memory: 443532 kiB.
[    7.987800] [TTM] Zone highmem: Available graphics memory: 777264 kiB.
[    7.987820] [drm] radeon: 64M of VRAM memory ready
[    7.987823] [drm] radeon: 512M of GTT memory ready.
[    7.987827] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    7.989661] [drm] radeon: cp idle (0x02000603)
[    7.989767] [drm] Loading R200 Microcode
[    7.989934] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[    7.993845] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[    7.993891] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[    7.993932] radeon 0000:01:00.0: failled initializing CP (-2).
[    7.993971] radeon 0000:01:00.0: Disabling GPU acceleration
[    7.994013] [drm] radeon: cp finalized
[    7.994840] [drm] Panel ID String: SEC                     
[    7.994843] [drm] Panel Size 1680x1050
[    7.994903] [drm] Default TV standard: NTSC
[    7.994905] [drm] 27.000000000 MHz TV ref clk
[    7.994908] [drm] No TV DAC info found in BIOS
[    7.994911] [drm] Default TV standard: NTSC
[    7.994913] [drm] 27.000000000 MHz TV ref clk
[    7.994946] [drm] Radeon Display Connectors
[    7.994948] [drm] Connector 0:
[    7.994950] [drm]   VGA
[    7.994953] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    7.994956] [drm]   Encoders:
[    7.994958] [drm]     CRT1: INTERNAL_DAC1
[    7.994960] [drm] Connector 1:
[    7.994962] [drm]   LVDS
[    7.994965] [drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[    7.994967] [drm]   Encoders:
[    7.994969] [drm]     LCD1: INTERNAL_LVDS
[    7.994972] [drm] Connector 2:
[    7.994974] [drm]   S-video
[    7.994975] [drm]   Encoders:
[    7.994977] [drm]     TV1: INTERNAL_DAC2
[    8.080452] [drm] fb mappable at 0x98040000
[    8.080455] [drm] vram apper at 0x98000000
[    8.080458] [drm] size 7056000
[    8.080460] [drm] fb depth is 24
[    8.080462] [drm]    pitch is 6720
[    8.153802] Console: switching to colour frame buffer device 210x65
[    8.196280] fb0: radeondrmfb frame buffer device
[    8.196283] registered panic notifier
[    8.196391] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[    8.447087] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[    8.448763] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[    8.449493] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    8.450136] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    8.450955] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    8.808393] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    8.808413] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[    8.830858] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    8.830936] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    9.110124] usb 1-5: ath9k_htc: Transferred FW: htc_9271.fw, size: 51288
[    9.756055] intel8x0_measure_ac97_clock: measured 55412 usecs (2670 samples)
[    9.756059] intel8x0: clocking to 48000
[   10.108048] ath9k_htc 1-5:1.0: ath9k_htc: Target is unresponsive
[   10.108282] Failed to initialize the device
[   10.117479] ath9k_htc: probe of 1-5:1.0 failed with error -22
[   10.117514] usbcore: registered new interface driver ath9k_htc
[   11.038997] loop: module loaded
[   13.694360] fuse init (API version 7.13)
[   15.075101] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[   16.714381] eth0: link down
[   16.714634] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.803681] apm: BIOS not found.
[   20.012814] Bluetooth: f6405f70
[   20.012848] NET: Registered protocol family 31
[   20.012851] Bluetooth: f6405f74
[   20.012855] Bluetooth: f6405f64
[   20.012857] Bluetooth: f6405f68
[   20.016661] Bluetooth: f6405f6c
[   20.162500] Bluetooth: f65cdf68
[   20.162507] Bluetooth: f65cdf6c
[   20.162509] Bluetooth: f65cdf70
[   20.197310] Bluetooth: f6405f38
[   20.197313] Bluetooth: f6405f38
[   20.257754] Bridge firewalling registered
[   21.245153] lp0: using parport0 (interrupt-driven).
[   21.378394] ppdev: user-space parallel port driver
[   42.960392] usb 1-5: USB disconnect, address 2
[   45.180547] usb 1-5: new high speed USB device using ehci_hcd and address 3
[   45.332477] usb 1-5: New USB device found, idVendor=0cf3, idProduct=9271
[   45.332490] usb 1-5: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[   45.332500] usb 1-5: Product: USB2.0 WLAN
[   45.332507] usb 1-5: Manufacturer: ATHEROS
[   45.332514] usb 1-5: SerialNumber: 12345
[   45.334344] usb 1-5: configuration #1 chosen from 1 choice
[   45.628418] usb 1-5: ath9k_htc: Transferred FW: htc_9271.fw, size: 51288
[   45.863754] ath9k_htc 1-5:1.0: ath9k_htc: HTC initialized with 33 credits
[   46.070721] ath9k_htc 1-5:1.0: ath9k_htc: FW Version: 1.2
[   46.070732] ath9k_htc 1-5:1.0: ath9k_htc: Please upgrade to FW version 1.3
[   46.071850] Failed to initialize the device
[   46.080993] ath9k_htc: probe of 1-5:1.0 failed with error -22
[   74.311445] operapluginwrap[2075]: segfault at 0 ip (null) sp bfa489cc error 4 in operapluginwrapper[8048000+36000]
[   74.343188] operapluginwrap[2076]: segfault at 0 ip (null) sp bf864a1c error 4 in operapluginwrapper[8048000+36000]
[   74.462895] operapluginwrap[2079]: segfault at 0 ip (null) sp bfeec4bc error 4 in operapluginwrapper[8048000+36000]
[   74.490742] operapluginwrap[2080]: segfault at 0 ip (null) sp bfd573cc error 4 in operapluginwrapper[8048000+36000]
[   86.413604] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   86.414215] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   96.432037] eth0: no IPv6 routers present
root@debian:~#

[    0.295204] pci 0000:02:04.0: supports D1 D2
[    0.295206] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.295212] pci 0000:02:04.0: PME# disabled
[    0.295252] pci 0000:00:1e.0: transparent bridge
[    0.295257] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[    0.295263] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x903fffff]
[    0.295290] pci_bus 0000:00: on NUMA node 0
[    0.295296] ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
[    0.295357] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
[    0.295383] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT]
[    0.306799] ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10)
[    0.306993] ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10)
[    0.307183] ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10)
[    0.307373] ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10)
[    0.307559] ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled.
[    0.307750] ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11
[    0.307929] ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled.
[    0.308131] ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10)
[    0.308292] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.308297] vgaarb: loaded
[    0.308381] PCI: Using ACPI for IRQ routing
[    0.308569] Switching to clocksource tsc
[    0.310303] pnp: PnP ACPI init
[    0.310318] ACPI: bus type pnp registered
[    0.320084] pnp: PnP ACPI: found 15 devices
[    0.320087] ACPI: ACPI bus type pnp unregistered
[    0.320091] PnPBIOS: Disabled by ACPI PNP
[    0.320103] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.320108] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.320112] system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
[    0.320123] system 00:0c: ioport range 0x140-0x14f has been reserved
[    0.320127] system 00:0c: ioport range 0x200-0x20f has been reserved
[    0.320132] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.320136] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[    0.320143] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[    0.320147] system 00:0d: ioport range 0x1000-0x107f has been reserved
[    0.320151] system 00:0d: ioport range 0x1100-0x113f has been reserved
[    0.320155] system 00:0d: ioport range 0x1200-0x121f has been reserved
[    0.320159] system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved
[    0.320166] system 00:0e: iomem range 0xfec01000-0xfec01fff has been reserved
[    0.354931] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.354935] pci 0000:00:01.0:   IO window: 0x3000-0x3fff
[    0.354940] pci 0000:00:01.0:   MEM window: 0x90400000-0x904fffff
[    0.354945] pci 0000:00:01.0:   PREFETCH window: 0x98000000-0x9fffffff
[    0.354954] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[    0.354957] pci 0000:02:04.0:   IO window: 0x002800-0x0028ff
[    0.354962] pci 0000:02:04.0:   IO window: 0x002c00-0x002cff
[    0.354967] pci 0000:02:04.0:   PREFETCH window: 0x60000000-0x63ffffff
[    0.354973] pci 0000:02:04.0:   MEM window: 0x68000000-0x6bffffff
[    0.354978] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.354982] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    0.354989] pci 0000:00:1e.0:   MEM window: 0x90000000-0x903fffff
[    0.354994] pci 0000:00:1e.0:   PREFETCH window: 0x60000000-0x63ffffff
[    0.355012] pci 0000:00:1e.0: setting latency timer to 64
[    0.355302] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5
[    0.355306] PCI: setting IRQ 5 as level-triggered
[    0.355311] pci 0000:02:04.0: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[    0.355319] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.355323] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.355327] pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
[    0.355331] pci_bus 0000:01: resource 1 mem: [0x90400000-0x904fffff]
[    0.355334] pci_bus 0000:01: resource 2 pref mem [0x98000000-0x9fffffff]
[    0.355338] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.355342] pci_bus 0000:02: resource 1 mem: [0x90000000-0x903fffff]
[    0.355346] pci_bus 0000:02: resource 2 pref mem [0x60000000-0x63ffffff]
[    0.355349] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.355353] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.355356] pci_bus 0000:03: resource 0 io:  [0x2800-0x28ff]
[    0.355360] pci_bus 0000:03: resource 1 io:  [0x2c00-0x2cff]
[    0.355363] pci_bus 0000:03: resource 2 pref mem [0x60000000-0x63ffffff]
[    0.355367] pci_bus 0000:03: resource 3 mem: [0x68000000-0x6bffffff]
[    0.355422] NET: Registered protocol family 2
[    0.355543] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.356005] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.357562] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.358550] TCP: Hash tables configured (established 131072 bind 65536)
[    0.358554] TCP reno registered
[    0.358709] NET: Registered protocol family 1
[    0.358819] pci 0000:01:00.0: Boot video device
[    0.358910] Unpacking initramfs...
[    0.689616] Freeing initrd memory: 8455k freed
[    0.701929] audit: initializing netlink socket (disabled)
[    0.701952] type=2000 audit(1329846465.699:1): initialized
[    0.707381] highmem bounce pool size: 64 pages
[    0.707388] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.709531] VFS: Disk quotas dquot_6.5.2
[    0.709610] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.709719] msgmni has been set to 1731
[    0.709964] alg: No test for stdrng (krng)
[    0.710038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.710042] io scheduler noop registered
[    0.710044] io scheduler anticipatory registered
[    0.710047] io scheduler deadline registered
[    0.710106] io scheduler cfq registered (default)
[    0.710329] isapnp: Scanning for PnP cards...
[    1.064040] isapnp: No Plug & Play device found
[    1.065753] Linux agpgart interface v0.103
[    1.065831] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[    1.079227] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.079317] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.079418] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.079564] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    1.079817] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.080394] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
[    1.080398] PCI: setting IRQ 10 as level-triggered
[    1.080404] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    1.080412] serial 0000:00:1f.6: PCI INT B disabled
[    1.080518] PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12
[    1.088404] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.095222] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.095232] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.095267] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.095292] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.095321] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.095423] mice: PS/2 mouse device common for all mice
[    1.095691] rtc_cmos 00:09: RTC can wake from S4
[    1.095739] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    1.095757] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    1.095774] cpuidle: using governor ladder
[    1.095777] cpuidle: using governor menu
[    1.095782] No iBFT detected.
[    1.096313] TCP cubic registered
[    1.096520] NET: Registered protocol family 10
[    1.097567] Mobile IPv6
[    1.097571] NET: Registered protocol family 17
[    1.097590] Using IPI No-Shortcut mode
[    1.097670] PM: Resume from disk failed.
[    1.097683] registered taskstats version 1
[    1.097958] rtc_cmos 00:09: setting system clock to 2012-02-21 17:47:46 UTC (1329846466)
[    1.098013] Initalizing network drop monitor service
[    1.098037] Freeing unused kernel memory: 380k freed
[    1.098293] Write protecting the kernel text: 2508k
[    1.098319] Write protecting the kernel read-only data: 920k
[    1.118137] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.118668] udev[46]: starting version 164
[    1.399523] SCSI subsystem initialized
[    1.453998] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    1.454003] wbsd: Copyright(c) Pierre Ossman
[    1.454817] wbsd 00:02: activated
[    1.460196] usbcore: registered new interface driver usbfs
[    1.460361] usbcore: registered new interface driver hub
[    1.460543] usbcore: registered new device driver usb
[    1.468969] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.469340] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5
[    1.469346] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 5 (level, low) -> IRQ 5
[    1.469367] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.469372] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.469401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.469441] ehci_hcd 0000:00:1d.7: debug port 1
[    1.473315] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.478843] mmc0: W83L51xD id 7112 at 0x248 irq 6 dma 0 PnP
[    1.519797] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.519849] 8139cp 0000:02:01.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    1.521060] eth0: RTL-8139C+ at 0xf7e92000, 00:02:3f:21:e2:71, IRQ 10
[    1.521303] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000
[    1.536929] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.536982] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.536986] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.536989] usb usb1: Product: EHCI Host Controller
[    1.536992] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.536995] usb usb1: SerialNumber: 0000:00:1d.7
[    1.537111] usb usb1: configuration #1 chosen from 1 choice
[    1.537151] hub 1-0:1.0: USB hub found
[    1.537162] hub 1-0:1.0: 6 ports detected
[    1.539127] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[    1.539134] firewire_ohci 0000:02:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[    1.539236] libata version 3.00 loaded.
[    1.546238] 8139too Fast Ethernet driver 0.9.28
[    1.549491] ata_piix 0000:00:1f.1: version 2.13
[    1.549510] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.549520] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[    1.549573] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.549658] scsi0 : ata_piix
[    1.549845] scsi1 : ata_piix
[    1.550800] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c40 irq 14
[    1.550804] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4c48 irq 15
[    1.570330] uhci_hcd: USB Universal Host Controller Interface driver
[    1.570389] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[    1.570400] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.570404] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.570422] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.570452] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0
[    1.570510] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.570514] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.570517] usb usb2: Product: UHCI Host Controller
[    1.570520] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.570523] usb usb2: SerialNumber: 0000:00:1d.0
[    1.570680] usb usb2: configuration #1 chosen from 1 choice
[    1.570764] hub 2-0:1.0: USB hub found
[    1.570774] hub 2-0:1.0: 2 ports detected
[    1.571154] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5
[    1.571158] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[    1.571166] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.571170] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.571180] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.571203] uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0
[    1.571248] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.571252] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.571255] usb usb3: Product: UHCI Host Controller
[    1.571258] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.571261] usb usb3: SerialNumber: 0000:00:1d.1
[    1.571384] usb usb3: configuration #1 chosen from 1 choice
[    1.571463] hub 3-0:1.0: USB hub found
[    1.571472] hub 3-0:1.0: 2 ports detected
[    1.571524] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[    1.571531] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.571535] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.571544] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.571565] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00
[    1.571608] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.571612] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.571615] usb usb4: Product: UHCI Host Controller
[    1.571618] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.571621] usb usb4: SerialNumber: 0000:00:1d.2
[    1.571738] usb usb4: configuration #1 chosen from 1 choice
[    1.571817] hub 4-0:1.0: USB hub found
[    1.571826] hub 4-0:1.0: 2 ports detected
[    1.616031] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI version 1.0
[    1.712629] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
[    1.712890] ata1.00: ATA-6: WDC WD800VE-07HDT0, 09.07D09, max UDMA/100
[    1.712895] ata1.00: 156301488 sectors, multi 16: LBA 
[    1.728404] ata2.00: configured for UDMA/33
[    1.728624] ata1.00: configured for UDMA/100
[    1.728770] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800VE-07HD 09.0 PQ: 0 ANSI: 5
[    1.731209] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.40 PQ: 0 ANSI: 5
[    1.757129] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.757192] sd 0:0:0:0: [sda] Write Protect is off
[    1.757196] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.757222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.757389]  sda: sda1 sda2 sda3 sda4
[    1.811469] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.825291] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.825298] Uniform CD-ROM driver Revision: 3.20
[    1.825421] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.837449] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.837967] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.848046] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    1.997042] usb 1-5: New USB device found, idVendor=0cf3, idProduct=9271
[    1.997048] usb 1-5: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[    1.997051] usb 1-5: Product: USB2.0 WLAN
[    1.997054] usb 1-5: Manufacturer: ATHEROS
[    1.997057] usb 1-5: SerialNumber: 12345
[    1.997185] usb 1-5: configuration #1 chosen from 1 choice
[    2.116130] firewire_core: created device fw0: GUID 00023f444a0065e2, S400
[    2.539841] EXT4-fs (sda4): mounted filesystem with ordered data mode
[    4.619860] udev[340]: starting version 164
[    5.593911] Marking TSC unstable due to TSC halts in idle
[    5.595031] processor LNXCPU:00: registered as cooling_device0
[    5.595493] Switching to clocksource acpi_pm
[    5.710599] ACPI: AC Adapter [C134] (on-line)
[    5.710858] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    5.715996] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    5.716150] ACPI: Power Button [C1BE]
[    5.716627] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    5.723984] ACPI: Lid Switch [C136]
[    5.724207] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.724310] ACPI: Power Button [PWRF]
[    6.116100] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0
[    6.170229] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[    6.210553] NET: Registered protocol family 23
[    6.239590] parport_pc 00:05: reported by Plug and Play ACPI
[    6.239641] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    6.250460] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.264241] ACPI: Battery Slot [C11F] (battery present)
[    6.268300] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.357197] Detected unconfigured Compaq x1000 family SMSC IrDA chip, pre-configuring device.
[    6.357202] Setting up Intel 82801 controller and SMSC device
[    6.357333] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[    6.357349] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x0e
[    6.357363] SMsC IrDA Controller found
[    6.357365]  IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[    6.357431] No transceiver found. Defaulting to Fast pin select
[    6.358987] IrDA: Registered device irda0
[    6.386256] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6
[    6.386362] ACPI: Video Device [C0D0] (multi-head: yes  rom: no  post: no)
[    6.576594] i801_smbus 0000:00:1f.3: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    6.577338] intel_rng: FWH not detected
[    7.094178] lib80211: common routines for IEEE802.11 drivers
[    7.094183] lib80211_crypt: registered algorithm 'NULL'
[    7.192354] ieee80211: 802.11 data/management/control stack, git-1.1.13
[    7.192358] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[    7.336628] [drm] Initialized drm 1.1.0 20060810
[    7.340123] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[    7.340127] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[    7.345402] ipw2100 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[    7.346088] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[    7.346111] ipw2100 0000:02:02.0: firmware: requesting ipw2100-1.3.fw
[    7.385734] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    7.385755] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[    7.405127] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[    7.405188] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    7.452683] Compat-wireless backport release: compat-wireless-2012-01-16-3-gadea9d0
[    7.452687] Backport based on linux-next.git next-20120118
[    7.504575] ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed.
[    7.504620] ipw2100: eth1: ipw2100_get_firmware failed: -2
[    7.504659] ipw2100: eth1: Failed to power on the adapter.
[    7.504698] ipw2100: eth1: Failed to start the firmware.
[    7.504737] ipw2100Error calling register_netdev.
[    7.505199] ipw2100 0000:02:02.0: PCI INT A disabled
[    7.505208] ipw2100: probe of 0000:02:02.0 failed with error -5
[    7.505295] yenta_cardbus 0000:02:04.0: CardBus bridge found [0e11:0860]
[    7.505313] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[    7.505316] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[    7.505322] yenta_cardbus 0000:02:04.0: TI: mfunc 0x001c1112, devctl 0x44
[    7.740241] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0818, PCI irq 5
[    7.740247] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[    7.740252] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[    7.740264] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[    7.740269] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[    7.740564] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff
[    7.740568] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
[    8.178234] [drm] radeon kernel modesetting enabled.
[    8.178320] radeon 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[    8.182476] [drm] radeon: Initializing kernel modesetting.
[    8.182618] [drm] register mmio base: 0x90400000
[    8.182621] [drm] register mmio size: 65536
[    8.183315] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    8.183341] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[    8.183360] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[    8.183398] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[    8.183423] [drm] radeon: VRAM 64M
[    8.183426] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[    8.183428] [drm] radeon: GTT 256M
[    8.183431] [drm] radeon: GTT from 0xB0000000 to 0xBFFFFFFF
[    8.183457] [drm] radeon: irq initialized.
[    8.184663] [drm] Detected VRAM RAM=64M, BAR=128M
[    8.184668] [drm] RAM width 128bits DDR
[    8.184747] [TTM] Zone  kernel: Available graphics memory: 443532 kiB.
[    8.184750] [TTM] Zone highmem: Available graphics memory: 777264 kiB.
[    8.184771] [drm] radeon: 64M of VRAM memory ready
[    8.184774] [drm] radeon: 256M of GTT memory ready.
[    8.185017] [drm] radeon: cp idle (0x02000603)
[    8.185063] [drm] Loading R200 Microcode
[    8.185458] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[    8.189168] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[    8.189213] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[    8.189254] radeon 0000:01:00.0: failled initializing CP (-2).
[    8.189293] radeon 0000:01:00.0: Disabling GPU acceleration
[    8.189335] [drm] radeon: cp finalized
[    8.189548] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    8.189552] [drm] radeon: cp finalized
[    8.189814] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[    8.189820] [TTM] Zone highmem: Used memory at exit: 0 kiB.
[    8.189823] [drm] radeon: ttm finalized
[    8.189828] [drm] Forcing AGP to PCI mode
[    8.190497] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    8.190512] [drm] radeon: VRAM 128M
[    8.190515] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[    8.190517] [drm] radeon: GTT 512M
[    8.190520] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[    8.190535] [drm] radeon: irq initialized.
[    8.190544] [drm] Detected VRAM RAM=128M, BAR=128M
[    8.190546] [drm] RAM width 128bits DDR
[    8.190724] [TTM] Zone  kernel: Available graphics memory: 443532 kiB.
[    8.190727] [TTM] Zone highmem: Available graphics memory: 777264 kiB.
[    8.190744] [drm] radeon: 64M of VRAM memory ready
[    8.190747] [drm] radeon: 512M of GTT memory ready.
[    8.190750] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    8.192601] [drm] radeon: cp idle (0x02000603)
[    8.192893] [drm] Loading R200 Microcode
[    8.193045] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[    8.198221] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[    8.198267] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[    8.198307] radeon 0000:01:00.0: failled initializing CP (-2).
[    8.198347] radeon 0000:01:00.0: Disabling GPU acceleration
[    8.198389] [drm] radeon: cp finalized
[    8.199273] [drm] Panel ID String: SEC                     
[    8.199277] [drm] Panel Size 1680x1050
[    8.199339] [drm] Default TV standard: NTSC
[    8.199341] [drm] 27.000000000 MHz TV ref clk
[    8.199343] [drm] No TV DAC info found in BIOS
[    8.199347] [drm] Default TV standard: NTSC
[    8.199349] [drm] 27.000000000 MHz TV ref clk
[    8.199381] [drm] Radeon Display Connectors
[    8.199383] [drm] Connector 0:
[    8.199385] [drm]   VGA
[    8.199388] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    8.199391] [drm]   Encoders:
[    8.199393] [drm]     CRT1: INTERNAL_DAC1
[    8.199395] [drm] Connector 1:
[    8.199397] [drm]   LVDS
[    8.199400] [drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[    8.199403] [drm]   Encoders:
[    8.199405] [drm]     LCD1: INTERNAL_LVDS
[    8.199407] [drm] Connector 2:
[    8.199409] [drm]   S-video
[    8.199410] [drm]   Encoders:
[    8.199412] [drm]     TV1: INTERNAL_DAC2
[    8.283873] [drm] fb mappable at 0x98040000
[    8.283877] [drm] vram apper at 0x98000000
[    8.283879] [drm] size 7056000
[    8.283881] [drm] fb depth is 24
[    8.283883] [drm]    pitch is 6720
[    8.357860] Console: switching to colour frame buffer device 210x65
[    8.357973] intel8x0_measure_ac97_clock: measured 73455 usecs (3536 samples)
[    8.357976] intel8x0: clocking to 48000
[    8.399698] fb0: radeondrmfb frame buffer device
[    8.399701] registered panic notifier
[    8.400507] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[    8.486237] cfg80211: Calling CRDA to update world regulatory domain
[    9.514148] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[    9.515802] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[    9.516555] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    9.517198] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    9.518017] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    9.848401] usb 1-5: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[   10.848034] ath9k_htc 1-5:1.0: ath9k_htc: Target is unresponsive
[   10.848268] Failed to initialize the device
[   10.857508] ath9k_htc: probe of 1-5:1.0 failed with error -22
[   10.857546] usbcore: registered new interface driver ath9k_htc
[   11.750513] loop: module loaded
[   14.294473] fuse init (API version 7.13)
[   15.708623] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[   17.058828] eth0: link down
[   17.059089] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.037150] apm: BIOS not found.
[   20.418005] Bluetooth: f6fe5f70
[   20.418050] NET: Registered protocol family 31
[   20.418053] Bluetooth: f6fe5f74
[   20.418057] Bluetooth: f6fe5f64
[   20.418060] Bluetooth: f6fe5f68
[   20.418301] Bluetooth: f6fe5f6c
[   20.503904] Bluetooth: f6445f68
[   20.503910] Bluetooth: f6445f6c
[   20.503913] Bluetooth: f6445f70
[   20.541670] Bluetooth: f64abf38
[   20.541673] Bluetooth: f64abf38
[   20.646559] Bridge firewalling registered
[   21.673168] lp0: using parport0 (interrupt-driven).
[   21.845054] ppdev: user-space parallel port driver
[   32.888956] usb 1-5: USB disconnect, address 2
[   33.824071] usb 1-5: new high speed USB device using ehci_hcd and address 3
[   33.972985] usb 1-5: New USB device found, idVendor=0cf3, idProduct=9271
[   33.972992] usb 1-5: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[   33.972996] usb 1-5: Product: USB2.0 WLAN
[   33.972998] usb 1-5: Manufacturer: ATHEROS
[   33.973001] usb 1-5: SerialNumber: 12345
[   33.973201] usb 1-5: configuration #1 chosen from 1 choice
[   34.268449] usb 1-5: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[   34.503413] ath9k_htc 1-5:1.0: ath9k_htc: HTC initialized with 33 credits
[   34.709128] ath9k_htc 1-5:1.0: ath9k_htc: FW Version: 1.3
[   34.709133] ath: EEPROM regdomain: 0x809c
[   34.709135] ath: EEPROM indicates we should expect a country code
[   34.709138] ath: doing EEPROM country->regdmn map search
[   34.709141] ath: country maps to regdmn code: 0x52
[   34.709144] ath: Country alpha2 being used: CN
[   34.709146] ath: Regpair used: 0x52
[   34.791849] ieee80211 phy1: Atheros AR9271 Rev:1
[   34.793268] Registered led device: ath9k_htc-phy1
[   34.793278] usb 1-5: ath9k_htc: USB layer initialized
root@debian:~#