Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2013-03-12 23:55:15

  djjanek - Użytkownik

djjanek
Użytkownik
Skąd: whereis
Zarejestrowany: 2007-11-15
Serwis

ZTE MF192 problem z oblokowaniem PIN

System debian wheezy 3.2.0-4-amd64 mam modemik ZTE MF 192  i kartę orange, jak poprzez network manager wskazuje pin dostaję że
Serial command timed out

Modem wydaję się poprawnie inicjuje w systemie:

Kod:

[  110.224665] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[  110.242073] usb 1-3: New USB device found, idVendor=19d2, idProduct=1519
[  110.242079] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[  110.242083] usb 1-3: Product: MF192
[  110.242086] usb 1-3: Manufacturer: ZTE
[  110.242089] usb 1-3: SerialNumber: 2BBA0631B46B6D8E048D1337899F53970A090CEF
[  110.242366] usb 1-3: ep 0x4 - rounding interval to 32768 microframes, ep desc says 0 microframes
[  110.242376] usb 1-3: ep 0x87 - rounding interval to 32768 microframes, ep desc says 0 microframes
[  110.244019] scsi7 : usb-storage 1-3:1.7
[  110.329978] cdc_acm 1-3:1.1: ttyACM0: USB ACM device
[  110.330776] cdc_acm 1-3:1.3: ttyACM1: USB ACM device
[  110.331327] cdc_acm 1-3:1.5: ttyACM2: USB ACM device
[  110.331787] usbcore: registered new interface driver cdc_acm
[  110.331791] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

z konsoli mam plik /etc/wvdial.conf:

Kod:

[Dialer orange]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyACM0
Username = internet
Password = internet
Baud = 460800

[Dialer orange-pin]
Init1 = ATZ
Init2 = AT+CPIN=7043
Modem = /dev/ttyACM0

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
; Phone = <Target Phone Number>
ISDN = 0
; Password = <Your Password>
New PPPD = yes
; Username = <Your Login Name>
Modem = /dev/ttyACM0
Baud = 460800

Daje mi takie coś:

Kod:

# wvdial orange-pin
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CPIN=7043
AT+CPIN=7043
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CPIN=7043
AT+CPIN=7043
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CPIN=7043
AT+CPIN=7043
ERROR
--> Bad init string.

inicjalizacja działa:

Kod:

# wvdialconf 
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- MF192-2.0.0
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyACM1<*1>: ATQ0 V1 E1 -- OK
ttyACM1<*1>: ATQ0 V1 E1 Z -- OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM1<*1>: Modem Identifier: ATI -- MF192-2.0.0
ttyACM1<*1>: Speed 4800: AT -- OK
ttyACM1<*1>: Speed 9600: AT -- OK
ttyACM1<*1>: Speed 19200: AT -- OK
ttyACM1<*1>: Speed 38400: AT -- OK
ttyACM1<*1>: Speed 57600: AT -- OK
ttyACM1<*1>: Speed 115200: AT -- OK
ttyACM1<*1>: Speed 230400: AT -- OK
ttyACM1<*1>: Speed 460800: AT -- OK
ttyACM1<*1>: Max speed is 460800; that should be safe.
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyACM1<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

Zdjęcie PIN nie możliwe, orange no i karta służbówka.
Na squeeze mi działało tylko musiałem stosować usb_modeswitch, jednak wolał bym zostać przy wheezy.

Jakieś pomysły na uruchomieni tego dziadostwa? Mi już się skończyły pomysły a Google przeglądam już chyba co raz te same linki.

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)

[ Generated in 0.011 seconds, 13 queries executed ]

Informacje debugowania

Time (s) Query
0.00011 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00132 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.223.43.106' WHERE u.id=1
0.00077 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.223.43.106', 1732715798)
0.00062 SELECT * FROM punbb_online WHERE logged<1732715498
0.00096 DELETE FROM punbb_online WHERE ident='18.116.24.111'
0.00073 DELETE FROM punbb_online WHERE ident='18.220.200.197'
0.00078 DELETE FROM punbb_online WHERE ident='18.227.0.255'
0.00069 DELETE FROM punbb_online WHERE ident='3.145.169.122'
0.00069 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=23134 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00141 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=23134 ORDER BY p.id LIMIT 0,25
0.00083 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=23134
Total query time: 0.009 s