Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2015-06-24 17:52:57
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Blokowanie ekranu.
Witam. Zwracam się z prośbą o pomoc bo nie mam pojęcia jak rozwiązać problem.
System Debian Jessie
Komputer: Toshiba satellite l-20
Jestem świeżo po instalacji systemu i mam problem z blokowaniem ekranu. Jeśli komputer jest nieużywany powiedzmy 5 min. i po tym czasie próbuję zacząć pracować tzn. ruch myszką czy wciśnięcie dowolnego klawisza to ekran robi się czarny i załącza dopiero po kolejnych kilku minutach. chciałem dodać, że pomimo czarnego ekranu system pracuje w tle.
Powyższa sytuacja dzieje się zarówno przy włączonym wygaszaczu ekranu jak i wyłączonym.
Czy ma ktoś pomysł jak to rozwiązać?
Ostatnio edytowany przez Przemo82 (2015-06-24 21:29:42)
Offline
#2 2015-06-24 20:29:19
Pavlo950 - 
człowiek pasjonat :D
#3 2015-06-24 20:56:03
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Dziękuję za zainteresowanie.
Nie jestem specjalistą od debiana więc proszę o wyrozumiałość.
Wersja kernela: 3.16.0-4-686-pea
Grafika: Mobility Radeon Xpress 200M
W Centrum Informacji KDE - zakładce Informacje o grafice - Open GL mam następujące info:
SterowniK
-producent - VMware, Inc.
- Renderer - Gallium 0.4 on llvmpipe (LLVM 3.5. 128 bits)
- Wersja OpenGL/ES - 3.0 Mesa 10.3.2
- Moduł jądra - nieznane
Offline
#4 2015-06-24 22:06:17
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Blokowanie ekranu.
Daj lepiej wynik z konta root:
Kod:
lspci -k | grep -iA3 vga
oraz ewentualnie:
Kod:
hwinfo --framebuffer
[b]hwinfo[/b] pewnie musisz zainstalować, na 100% jest w repo.
Ostatnio edytowany przez Jacekalex (2015-06-24 22:10:09)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#5 2015-06-24 22:18:49
Pavlo950 - człowiek pasjonat :D
#6 2015-06-24 22:21:03
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Blokowanie ekranu.
[quote=Pavlo950]I przy okazji:
Kod:
dpkgl -l | grep -e xorg -e xserver -e mesa -e gl1
[/quote]
Kod:
Debian Jessie śro cze 24 22:20:00 localhost : / root ~> dpkgl -l | grep -e xorg -e xserver -e mesa -e gl1 bash: dpkgl: nie znaleziono polecenia
Przy okazji popraw babola. ;)
Ostatnio edytowany przez Jacekalex (2015-06-24 22:21:42)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#7 2015-06-24 23:01:02
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Kod:
Kod: lspci -k | grep -iA3 vga
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RC410M [Mobility Radeon Xpress 200M]
Subsystem: Toshiba America Info Systems Device ff31
Kernel driver in use: radeon
09:01.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
Kod:
hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.ep1ke1RKNV5
Hardware Class: framebuffer
Model: "ATI MS4"
Vendor: "ATI Technologies Inc."
Device: "MS4"
SubVendor: "ATI RADEON XPRESS 200M Series"
SubDevice:
Revision: "01.00"
Memory Size: 516 MB
Memory Range: 0xd0000000-0xf03fffff (rw)
Mode 0x0382: 320x200 (+320), 8 bits
Mode 0x030d: 320x200 (+640), 15 bits
Mode 0x030e: 320x200 (+640), 16 bits
Mode 0x030f: 320x200 (+960), 24 bits
Mode 0x0320: 320x200 (+1280), 24 bits
Mode 0x0392: 320x240 (+320), 8 bits
Mode 0x0393: 320x240 (+640), 15 bits
Mode 0x0394: 320x240 (+640), 16 bits
Mode 0x0395: 320x240 (+960), 24 bits
Mode 0x0396: 320x240 (+1280), 24 bits
Mode 0x03a2: 400x300 (+400), 8 bits
Mode 0x03a3: 400x300 (+800), 15 bits
Mode 0x03a4: 400x300 (+800), 16 bits
Mode 0x03a5: 400x300 (+1200), 24 bits
Mode 0x03a6: 400x300 (+1600), 24 bits
Mode 0x03b2: 512x384 (+512), 8 bits
Mode 0x03b3: 512x384 (+1024), 15 bits
Mode 0x03b4: 512x384 (+1024), 16 bits
Mode 0x03b5: 512x384 (+1536), 24 bits
Mode 0x03b6: 512x384 (+2048), 24 bits
Mode 0x03c2: 640x350 (+640), 8 bits
Mode 0x03c3: 640x350 (+1280), 15 bits
Mode 0x03c4: 640x350 (+1280), 16 bits
Mode 0x03c5: 640x350 (+1920), 24 bits
Mode 0x03c6: 640x350 (+2560), 24 bits
Mode 0x0300: 640x400 (+640), 8 bits
Mode 0x0383: 640x400 (+1280), 15 bits
Mode 0x0384: 640x400 (+1280), 16 bits
Mode 0x0385: 640x400 (+1920), 24 bits
Mode 0x0386: 640x400 (+2560), 24 bits
Mode 0x0301: 640x480 (+640), 8 bits
Mode 0x0310: 640x480 (+1280), 15 bits
Mode 0x0311: 640x480 (+1280), 16 bits
Mode 0x0312: 640x480 (+1920), 24 bits
Mode 0x0321: 640x480 (+2560), 24 bits
Mode 0x0303: 800x600 (+800), 8 bits
Mode 0x0313: 800x600 (+1600), 15 bits
Mode 0x0314: 800x600 (+1600), 16 bits
Mode 0x0315: 800x600 (+2400), 24 bits
Mode 0x0322: 800x600 (+3200), 24 bits
Mode 0x0305: 1024x768 (+1024), 8 bits
Mode 0x0316: 1024x768 (+2048), 15 bits
Mode 0x0317: 1024x768 (+2048), 16 bits
Mode 0x0318: 1024x768 (+3072), 24 bits
Config Status: cfg=new, avail=yes, need=no, active=unknown
Jeśli chodzi o ostatnią komendę
Kod:
dpkgl -l | grep -e xorg -e xserver -e mesa -e gl1
dpkgl: nie znaleziono polecenia
Ostatnio edytowany przez Przemo82 (2015-06-24 23:05:03)
Offline
#8 2015-06-24 23:19:28
Pavlo950 - człowiek pasjonat :D
Re: Blokowanie ekranu.
[quote=Przemo82]Jeśli chodzi o ostatnią komendę
Kod:
dpkgl -l | grep -e xorg -e xserver -e mesa -e gl1
dpkgl: nie znaleziono polecenia[/quote]
Wyniki wrzucaj w <code> </code> (zamiast ptaszków kwadratowy nawias. Niżej poprawiona komenda :)
Kod:
dpkg -l | grep -e xorg -e xserver -e mesa -e gl1
Offline
#9 2015-06-25 14:14:23
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Kod:
dpkg -l | grep -e xorg -e xserver -e mesa -e gl1
Kod:
ii coinor-libcgl1 0.58.9-1 i386 COIN-OR Cut Generation Library ii libegl1-mesa:i386 10.3.2-1 i386 free implementation of the EGL API -- runtime ii libegl1-mesa-drivers:i386 10.3.2-1 i386 free implementation of the EGL API -- hardware drivers ii libgl1-mesa-dri:i386 10.3.2-1 i386 free implementation of the OpenGL API -- DRI modules ii libgl1-mesa-glx:i386 10.3.2-1 i386 free implementation of the OpenGL API -- GLX runtime ii libglapi-mesa:i386 10.3.2-1 i386 free implementation of the GL API -- shared library ii libgles1-mesa:i386 10.3.2-1 i386 free implementation of the OpenGL|ES 1.x API -- runtime ii libgles2-mesa:i386 10.3.2-1 i386 free implementation of the OpenGL|ES 2.x API -- runtime ii libglu1-mesa:i386 9.0.0-2 i386 Mesa OpenGL utility library (GLU) ii libopenvg1-mesa:i386 10.3.2-1 i386 free implementation of the OpenVG API -- runtime ii libwayland-egl1-mesa:i386 10.3.2-1 i386 implementation of the Wayland EGL platform -- runtime ii x11-xserver-utils 7.7+3+b1 i386 X server utilities ii xorg 1:7.7+7 i386 X.Org X Window System ii xorg-docs-core 1:1.7-1 all Core documentation for the X.org X Window System ii xserver-common 2:1.16.4-1 all common files used by various X servers ii xserver-xorg 1:7.7+7 i386 X.Org X server ii xserver-xorg-core 2:1.16.4-1 i386 Xorg X server - core server ii xserver-xorg-input-all 1:7.7+7 i386 X.Org X server -- input driver metapackage ii xserver-xorg-input-evdev 1:2.9.0-2 i386 X.Org X server -- evdev input driver ii xserver-xorg-input-mouse 1:1.9.1-1 i386 X.Org X server -- mouse input driver ii xserver-xorg-input-synaptics 1.8.1-1 i386 Synaptics TouchPad driver for X.Org server ii xserver-xorg-input-vmmouse 1:13.0.0-1+b3 i386 X.Org X server -- VMMouse input driver to use with VMWare ii xserver-xorg-input-wacom 0.26.0+20140918-1 i386 X.Org X server -- Wacom input driver ii xserver-xorg-video-all 1:7.7+7 i386 X.Org X server -- output driver metapackage ii xserver-xorg-video-ati 1:7.5.0-1 i386 X.Org X server -- AMD/ATI display driver wrapper ii xserver-xorg-video-cirrus 1:1.5.2-2+b1 i386 X.Org X server -- Cirrus display driver ii xserver-xorg-video-fbdev 1:0.4.4-1+b2 i386 X.Org X server -- fbdev display driver ii xserver-xorg-video-geode 2.11.16-7 i386 X.Org X server -- Geode GX2/LX display driver ii xserver-xorg-video-intel 2:2.21.15-2+b2 i386 X.Org X server -- Intel i8xx, i9xx display driver ii xserver-xorg-video-mach64 6.9.4-2 i386 X.Org X server -- ATI Mach64 display driver ii xserver-xorg-video-mga 1:1.6.3-2+b1 i386 X.Org X server -- MGA display driver ii xserver-xorg-video-modesetting 0.9.0-1+b1 i386 X.Org X server -- Generic modesetting driver ii xserver-xorg-video-neomagic 1:1.2.8-1+b2 i386 X.Org X server -- Neomagic display driver ii xserver-xorg-video-nouveau 1:1.0.11-1 i386 X.Org X server -- Nouveau display driver ii xserver-xorg-video-openchrome 1:0.3.3-1+b2 i386 X.Org X server -- VIA display driver ii xserver-xorg-video-qxl 0.1.1-2+b1 i386 X.Org X server -- QXL display driver ii xserver-xorg-video-r128 6.9.2-1+b2 i386 X.Org X server -- ATI r128 display driver ii xserver-xorg-video-radeon 1:7.5.0-1 i386 X.Org X server -- AMD/ATI Radeon display driver ii xserver-xorg-video-savage 1:2.3.7-2+b2 i386 X.Org X server -- Savage display driver ii xserver-xorg-video-siliconmotion 1:1.7.7-2+b2 i386 X.Org X server -- SiliconMotion display driver ii xserver-xorg-video-sisusb 1:0.9.6-2+b2 i386 X.Org X server -- SiS USB display driver ii xserver-xorg-video-tdfx 1:1.4.5-1+b2 i386 X.Org X server -- tdfx display driver ii xserver-xorg-video-trident 1:1.3.6-2+b2 i386 X.Org X server -- Trident display driver ii xserver-xorg-video-vesa 1:2.3.3-1+b3 i386 X.Org X server -- VESA display driver ii xserver-xorg-video-vmware 1:13.0.2-3.1 i386 X.Org X server -- VMware display driver
Coś mi z tymi kodami nie wychodzi...
Ostatnio edytowany przez Przemo82 (2015-06-25 14:22:17)
Offline
#10 2015-06-25 15:19:09
Bodzio - Ojciec Założyciel
Re: Blokowanie ekranu.
zmieniłem Ci nawiasy html takie: < >
na BBCode takie: [ ]
U dołu strony masz link BBCode i tam przykłady
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
#11 2015-06-25 15:28:29
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Dzięki za korektę. Myślałem, że tylko komendy podaje się w nawiasie kwadratowym.
Offline
#12 2015-06-25 16:17:41
Pavlo950 - człowiek pasjonat :D
#13 2015-06-25 18:39:06
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Blokowanie ekranu.
Nie działają ci sterowniki.
Podziel się logiem /var/log/Xorg.0.log i wynikiem dmesg.
Offline
#14 2015-06-25 18:57:00
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Kod:
dpkg -l | grep -e dm -e light
Kod:
ii bsdmainutils 9.0.6 i386 collection of more utilities from FreeBSD ii dmidecode 2.12-3 i386 SMBIOS/DMI table decoder ii dmsetup 2:1.02.90-2.2 i386 Linux Kernel Device Mapper userspace library ii exim4-daemon-light 4.84-8 i386 lightweight Exim MTA (v4) daemon ii iptables 1.4.21-2+b1 i386 administration tools for packet filtering and NAT ii kdm 4:4.11.13-2 i386 KDE Display Manager for X11 ii libaacs0:i386 0.8.1-dmo1 i386 free-and-libre implementation of AACS ii libavresample2:i386 10:2.6.3-dmo1 i386 FFmpeg audio conversion library ii libavutil54:i386 10:2.6.3-dmo1 i386 FFmpeg avutil library - runtime files ii libbasicusageenvironment0 2:2015.03.19-dmo1 i386 multimedia RTSP streaming library (BasicUsageEnvironment class) ii libbluray1:i386 2:0.7.0-dmo1 i386 Blu-ray disc playback support library (shared library) ii libdaemon0:i386 0.14-6 i386 lightweight C library for daemons - runtime library ii libdca0:i386 0.0.5-dmo2 i386 decoding library for DTS Coherent Acoustics streams ii libdmtx0a:i386 0.7.4-2 i386 Data Matrix barcodes (runtime library) ii libdvbpsi9:i386 1.2.0-dmo1 i386 library for MPEG TS and DVB PSI tables decoding and generating ii libebml4:i386 1.3.1-dmo2 i386 Access library for the EBML format (shared library) ii liblogging-stdlog0:i386 1.0.4-1 i386 easy to use and lightweight logging library ii libmatroska6:i386 1.4.2-dmo2 i386 Extensible open standard audio/video container format (shared library) ii libmp3lame0:i386 1:3.99.5-dmo4 i386 Shared libraries for MP3 encoding ii libnfsidmap2:i386 0.25-5 i386 NFS idmapping library ii libntrack0 016-1.3 i386 lightweight connectivity tracking library ii libpod-readme-perl 0.11-1 all Perl module to convert POD to README file ii libquadmath0:i386 4.9.2-10 i386 GCC Quad-Precision Math Library ii librtmp1:i386 2:2.4~20150315.gita107cef9b-dmo1 i386 Toolkit for RTMP streams (shared library) ii libswscale3:i386 10:2.6.3-dmo1 i386 FFmpeg video scaling library ii libvlc5 1:2.2.1-dmo1 i386 multimedia player and streamer library ii libvlccore8 1:2.2.1-dmo1 i386 base library for VLC and its modules ii libxdmcp6:i386 1:1.1.1-1+b1 i386 X11 Display Manager Control Protocol library ii libxvidcore4:i386 3:1.3.3-dmo1 i386 High quality ISO MPEG4 codec library ii passwd 1:4.2-3 i386 change and administer password and group data ii phonon-backend-vlc:i386 1:0.8.2-dmo1 i386 Phonon VLC backend ii policykit-1 0.105-8 i386 framework for managing administrative policies and privileges ii python-pygments 2.0.1+dfsg-1.1 all syntax highlighting package written in Python ii tzdata 2015e-0+deb8u1 all time zone and daylight-saving time data ii tzdata-java 2015e-0+deb8u1 all time zone and daylight-saving time data for use by java runtimes ii vlc-data 1:2.2.1-dmo1 all Common data for VLC ii vlc-plugin-pulse 1:2.2.1-dmo1 all transitional dummy package for vlc
Jeśli chodzi o log z var/log/Xorg.0.log:
Kod:
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 24.065] X Protocol Version 11, Revision 0
[ 24.065] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 24.065] Current Operating System: Linux debian 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) i686
[ 24.065] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=986fedc2-6d6e-4a8f-86de-f539b505d154 ro quiet
[ 24.065] Build Date: 11 February 2015 01:14:26AM
[ 24.065] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 24.065] Current version of pixman: 0.32.6
[ 24.065] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.065] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.066] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 25 14:10:43 2015
[ 24.151] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.267] (==) No Layout section. Using the first Screen section.
[ 24.267] (==) No screen section available. Using defaults.
[ 24.267] (**) |-->Screen "Default Screen Section" (0)
[ 24.267] (**) | |-->Monitor "<default monitor>"
[ 24.290] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.290] (==) Automatically adding devices
[ 24.291] (==) Automatically enabling devices
[ 24.291] (==) Automatically adding GPU devices
[ 24.360] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 24.361] Entry deleted from font path.
[ 24.427] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 24.427] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.427] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.427] (II) Loader magic: 0xb778d700
[ 24.427] (II) Module ABI versions:
[ 24.427] X.Org ANSI C Emulation: 0.4
[ 24.427] X.Org Video Driver: 18.0
[ 24.427] X.Org XInput driver : 21.0
[ 24.427] X.Org Server Extension : 8.0
[ 24.428] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 24.430] (--) PCI:*(0:1:5:0) 1002:5a62:1179:ff31 rev 0, Mem @ 0xd0000000/268435456, 0xc0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 24.450] (II) LoadModule: "glx"
[ 24.486] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.669] (II) Module glx: vendor="X.Org Foundation"
[ 24.669] compiled for 1.16.4, module version = 1.0.0
[ 24.669] ABI class: X.Org Server Extension, version 8.0
[ 24.669] (==) AIGLX enabled
[ 24.670] (==) Matched ati as autoconfigured driver 0
[ 24.670] (==) Matched ati as autoconfigured driver 1
[ 24.670] (==) Matched modesetting as autoconfigured driver 2
[ 24.670] (==) Matched fbdev as autoconfigured driver 3
[ 24.670] (==) Matched vesa as autoconfigured driver 4
[ 24.670] (==) Assigned the driver to the xf86ConfigLayout
[ 24.670] (II) LoadModule: "ati"
[ 24.670] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 24.690] (II) Module ati: vendor="X.Org Foundation"
[ 24.691] compiled for 1.16.1, module version = 7.5.0
[ 24.691] Module class: X.Org Video Driver
[ 24.691] ABI class: X.Org Video Driver, version 18.0
[ 24.691] (II) LoadModule: "radeon"
[ 24.691] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 24.782] (II) Module radeon: vendor="X.Org Foundation"
[ 24.782] compiled for 1.16.1, module version = 7.5.0
[ 24.782] Module class: X.Org Video Driver
[ 24.782] ABI class: X.Org Video Driver, version 18.0
[ 24.782] (II) LoadModule: "modesetting"
[ 24.783] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.800] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.800] compiled for 1.15.99.904, module version = 0.9.0
[ 24.800] Module class: X.Org Video Driver
[ 24.800] ABI class: X.Org Video Driver, version 18.0
[ 24.800] (II) LoadModule: "fbdev"
[ 24.801] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 24.809] (II) Module fbdev: vendor="X.Org Foundation"
[ 24.809] compiled for 1.15.99.904, module version = 0.4.4
[ 24.809] Module class: X.Org Video Driver
[ 24.809] ABI class: X.Org Video Driver, version 18.0
[ 24.809] (II) LoadModule: "vesa"
[ 24.809] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.818] (II) Module vesa: vendor="X.Org Foundation"
[ 24.818] compiled for 1.15.99.904, module version = 2.3.3
[ 24.818] Module class: X.Org Video Driver
[ 24.818] ABI class: X.Org Video Driver, version 18.0
[ 24.818] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 24.825] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 24.825] (II) FBDEV: driver for framebuffer: fbdev
[ 24.825] (II) VESA: driver for VESA chipsets: vesa
[ 24.825] (++) using VT number 7
[ 24.854] (II) [KMS] Kernel modesetting enabled.
[ 24.854] (WW) Falling back to old probe method for modesetting
[ 24.854] (WW) Falling back to old probe method for fbdev
[ 24.854] (II) Loading sub module "fbdevhw"
[ 24.854] (II) LoadModule: "fbdevhw"
[ 24.855] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 24.877] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 24.877] compiled for 1.16.4, module version = 0.0.2
[ 24.877] ABI class: X.Org Video Driver, version 18.0
[ 24.877] (WW) Falling back to old probe method for vesa
[ 24.877] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 24.877] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 24.877] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.877] (==) RADEON(0): Default visual is TrueColor
[ 24.877] (==) RADEON(0): RGB weight 888
[ 24.877] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 24.877] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5A62 (PCIE)" (ChipID = 0x5a62)
[ 24.877] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
[ 24.877] (II) Loading sub module "shadow"
[ 24.877] (II) LoadModule: "shadow"
[ 24.877] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 24.883] (II) Module shadow: vendor="X.Org Foundation"
[ 24.883] compiled for 1.16.4, module version = 1.1.0
[ 24.883] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.883] (II) RADEON(0): KMS Color Tiling: disabled
[ 24.883] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 24.883] (II) RADEON(0): KMS Pageflipping: enabled
[ 24.883] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 24.905] (II) RADEON(0): Output VGA-0 has no monitor section
[ 24.905] (II) RADEON(0): Output LVDS has no monitor section
[ 24.905] (II) RADEON(0): Output S-video has no monitor section
[ 24.927] (II) RADEON(0): EDID for output VGA-0
[ 24.927] (II) RADEON(0): EDID for output LVDS
[ 24.927] (II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
[ 24.927] (II) RADEON(0): Year: 2003 Week: 0
[ 24.927] (II) RADEON(0): EDID Version: 1.3
[ 24.927] (II) RADEON(0): Digital Display Input
[ 24.927] (II) RADEON(0): Max Image Size [cm]: horiz.: 31 vert.: 23
[ 24.927] (II) RADEON(0): Gamma: 2.20
[ 24.927] (II) RADEON(0): No DPMS capabilities specified
[ 24.928] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 24.928] (II) RADEON(0): First detailed timing is preferred mode
[ 24.928] (II) RADEON(0): redX: 0.589 redY: 0.337 greenX: 0.322 greenY: 0.524
[ 24.928] (II) RADEON(0): blueX: 0.152 blueY: 0.137 whiteX: 0.315 whiteY: 0.330
[ 24.928] (II) RADEON(0): Manufacturer's mask: 0
[ 24.928] (II) RADEON(0): Supported detailed timing:
[ 24.928] (II) RADEON(0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 24.928] (II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 24.928] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 24.928] (II) RADEON(0): Unknown vendor-specific block f
[ 24.928] (II) RADEON(0): SAMSUNG
[ 24.928] (II) RADEON(0): LTN150XB-L03
[ 24.928] (II) RADEON(0): EDID (in hex):
[ 24.928] (II) RADEON(0): 00ffffffffffff004ca3000000000000
[ 24.928] (II) RADEON(0): 000d0103801f17780ad90e9656528627
[ 24.928] (II) RADEON(0): 23505400000001010101010101010101
[ 24.928] (II) RADEON(0): 01010101010164190040410026301888
[ 24.928] (II) RADEON(0): 360030e4100000190000000f00047e18
[ 24.928] (II) RADEON(0): ff0105026f18ff027401000000fe0053
[ 24.928] (II) RADEON(0): 414d53554e470a2020202020000000fe
[ 24.928] (II) RADEON(0): 004c544e31353058422d4c30330a0049
[ 24.928] (II) RADEON(0): Printing probed modes for output LVDS
[ 24.928] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 24.928] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 24.928] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 24.928] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 24.928] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 24.928] (II) RADEON(0): EDID for output S-video
[ 24.928] (II) RADEON(0): Output VGA-0 disconnected
[ 24.928] (II) RADEON(0): Output LVDS connected
[ 24.928] (II) RADEON(0): Output S-video disconnected
[ 24.928] (II) RADEON(0): Using exact sizes for initial modes
[ 24.928] (II) RADEON(0): Output LVDS using initial mode 1024x768
[ 24.928] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 24.928] (II) RADEON(0): mem size init: gart size :1feff000 vram size: s:8000000 visible:fcc0000
[ 24.928] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 24.928] (==) RADEON(0): DPI set to (96, 96)
[ 24.928] (II) Loading sub module "fb"
[ 24.928] (II) LoadModule: "fb"
[ 24.928] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.953] (II) Module fb: vendor="X.Org Foundation"
[ 24.953] compiled for 1.16.4, module version = 1.0.0
[ 24.953] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.954] (II) Loading sub module "ramdac"
[ 24.954] (II) LoadModule: "ramdac"
[ 24.954] (II) Module "ramdac" already built-in
[ 24.954] (II) UnloadModule: "modesetting"
[ 24.954] (II) Unloading modesetting
[ 24.954] (II) UnloadModule: "fbdev"
[ 24.954] (II) Unloading fbdev
[ 24.954] (II) UnloadSubModule: "fbdevhw"
[ 24.954] (II) Unloading fbdevhw
[ 24.954] (II) UnloadModule: "vesa"
[ 24.954] (II) Unloading vesa
[ 24.954] (--) Depth 24 pixmap format is 32 bpp
[ 24.956] (II) RADEON(0): Front buffer size: 3072K
[ 24.956] (II) RADEON(0): VRAM usage limit set to 230140K
[ 24.978] (==) RADEON(0): Backing store enabled
[ 24.978] (WW) RADEON(0): Direct rendering disabled
[ 24.978] (II) RADEON(0): Acceleration disabled
[ 24.978] (==) RADEON(0): DPMS enabled
[ 24.978] (==) RADEON(0): Silken mouse enabled
[ 24.979] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.981] (--) RandR disabled
[ 24.996] (II) SELinux: Disabled on system
[ 24.998] (II) AIGLX: Screen 0 is not DRI2 capable
[ 24.998] (EE) AIGLX: reverting to software rendering
[ 26.184] (II) AIGLX: Loaded and initialized swrast
[ 26.184] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 26.190] (EE) RADEON(0): drmmode_do_crtc_dpms cannot get last vblank counter
[ 26.190] (II) RADEON(0): Setting screen physical size to 270 x 203
[ 26.611] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 26.611] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.611] (II) LoadModule: "evdev"
[ 26.612] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.656] (II) Module evdev: vendor="X.Org Foundation"
[ 26.656] compiled for 1.16.0, module version = 2.9.0
[ 26.656] Module class: X.Org XInput Driver
[ 26.656] ABI class: X.Org XInput driver, version 21.0
[ 26.656] (II) Using input driver 'evdev' for 'Power Button'
[ 26.656] (**) Power Button: always reports core events
[ 26.656] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 26.657] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.657] (--) evdev: Power Button: Found keys
[ 26.657] (II) evdev: Power Button: Configuring as keyboard
[ 26.657] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 26.657] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.657] (**) Option "xkb_rules" "evdev"
[ 26.657] (**) Option "xkb_model" "pc105"
[ 26.657] (**) Option "xkb_layout" "pl"
[ 26.730] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 26.730] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.730] (II) Using input driver 'evdev' for 'Power Button'
[ 26.730] (**) Power Button: always reports core events
[ 26.730] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 26.730] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.730] (--) evdev: Power Button: Found keys
[ 26.730] (II) evdev: Power Button: Configuring as keyboard
[ 26.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 26.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 26.730] (**) Option "xkb_rules" "evdev"
[ 26.730] (**) Option "xkb_model" "pc105"
[ 26.730] (**) Option "xkb_layout" "pl"
[ 26.731] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 26.731] (II) No input driver specified, ignoring this device.
[ 26.731] (II) This device may have been added with another device file.
[ 26.732] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event1)
[ 26.732] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[ 26.732] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
[ 26.732] (**) A4Tech USB Mouse: always reports core events
[ 26.732] (**) evdev: A4Tech USB Mouse: Device: "/dev/input/event1"
[ 26.732] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xc10a
[ 26.732] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons
[ 26.732] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s)
[ 26.732] (--) evdev: A4Tech USB Mouse: Found relative axes
[ 26.732] (--) evdev: A4Tech USB Mouse: Found x and y relative axes
[ 26.732] (--) evdev: A4Tech USB Mouse: Found absolute axes
[ 26.732] (II) evdev: A4Tech USB Mouse: Forcing absolute x/y axes to exist.
[ 26.732] (II) evdev: A4Tech USB Mouse: Configuring as mouse
[ 26.732] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
[ 26.732] (**) evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[ 26.732] (**) evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-4/3-4:1.0/0003:09DA:C10A.0001/input/input2/event1"
[ 26.732] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 8)
[ 26.732] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
[ 26.732] (WW) evdev: A4Tech USB Mouse: ignoring absolute axes.
[ 26.733] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[ 26.733] (**) A4Tech USB Mouse: (accel) acceleration profile 0
[ 26.733] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
[ 26.733] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
[ 26.733] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0)
[ 26.733] (II) No input driver specified, ignoring this device.
[ 26.733] (II) This device may have been added with another device file.
[ 26.734] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.734] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.734] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.734] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.734] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 26.734] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 26.734] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 26.734] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.734] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 26.734] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 26.734] (**) Option "xkb_rules" "evdev"
[ 26.734] (**) Option "xkb_model" "pc105"
[ 26.734] (**) Option "xkb_layout" "pl"
[ 26.735] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 26.735] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 26.735] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 26.735] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 26.735] (II) LoadModule: "synaptics"
[ 26.735] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.762] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.763] compiled for 1.16.0.901, module version = 1.8.99
[ 26.763] Module class: X.Org XInput Driver
[ 26.763] ABI class: X.Org XInput driver, version 21.0
[ 26.763] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 26.763] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.763] (**) Option "Device" "/dev/input/event6"
[ 26.763] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 85)
[ 26.763] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 94)
[ 26.763] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 26.763] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 26.763] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 26.763] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 26.763] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.763] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.763] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 26.763] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 26.763] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 26.763] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 26.763] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 26.764] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 26.764] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 26.764] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 26.764] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 26.764] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.764] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 26.764] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 26.765] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 26.765] (II) No input driver specified, ignoring this device.
[ 26.765] (II) This device may have been added with another device file.
[ 46.958] (II) RADEON(0): EDID vendor "SEC", prod id 0
[ 46.958] (II) RADEON(0): Printing DDC gathered Modelines:
[ 46.958] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 53.483] (II) RADEON(0): EDID vendor "SEC", prod id 0
[ 53.483] (II) RADEON(0): Printing DDC gathered Modelines:
[ 53.483] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 1314.242] (EE) RADEON(0): drmmode_do_crtc_dpms cannot get last vblank counter
[ 2329.458] (EE) RADEON(0): drmmode_do_crtc_dpms cannot get last vblank counter
[ 6485.224] (EE) RADEON(0): drmmode_do_crtc_dpms cannot get last vblank counter
[ 8505.323] (EE) RADEON(0): drmmode_do_crtc_dpms cannot get last vblank counterOffline
#15 2015-06-25 19:10:17
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Blokowanie ekranu.
[ 24.877] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS[/quote]
Zapomniałeś jeszcze o podaniu [tt]dmesg[/tt].
Instalowałeś firmware?
Offline
#16 2015-06-25 19:21:14
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Kod:
dmesg
Kod:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24)
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077e9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077ea0000-0x0000000077eb2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077eb3000-0x0000000077efffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077f00000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.34 present.
[ 0.000000] DMI: TOSHIBA Satellite L20 /Satellite L20 , BIOS V1.90 01/05/06
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x77ea0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 060000000 mask FF0000000 write-back
[ 0.000000] 3 base 070000000 mask FF8000000 write-back
[ 0.000000] 4 base 077F00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [mem 0x000f73b0-0x000f73bf] mapped at [c00f73b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36200000-0x363fffff]
[ 0.000000] [mem 0x36200000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x361fffff]
[ 0.000000] [mem 0x34000000-0x361fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x375fdfff]
[ 0.000000] [mem 0x36400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] BRK [0x01799000, 0x0179afff] PGTABLE
[ 0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36414000-0x37201fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F7450 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x77EAE1D6 000038 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x77EB2F00 000074 (v01 ATI Goldfish 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 0x77EAE62B 0048D5 (v01 ATI SB400 06040000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0x77EB3FC0 000040
[ 0.000000] ACPI: APIC 0x77EB2F74 000050 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x77EB2FC4 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 0x77EAE410 00021B (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
[ 0.000000] ACPI: SSDT 0x77EAE20E 000202 (v01 PmRef CpuPm 00003000 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1032MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x77e9ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x77e9ffff]
[ 0.000000] On node 0 totalpages: 491070
[ 0.000000] free_area_init_node: node 0, pgdat c1658ec0, node_mem_map f5514020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2066 pages used for memmap
[ 0.000000] HighMem zone: 264354 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x82
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x78000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75e4000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489298
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=986fedc2-6d6e-4a8f-86de-f539b505d154 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:00077ea0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1925896K/1964280K available (4599K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 38384K reserved, 1057416K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc166d000 - 0xc1711000 ( 656 kB)
.data : 0xc147e240 - 0xc166b880 (1973 kB)
.text : 0xc1000000 - 0xc147e240 (4600 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5006000 soft=f5008000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.075 MHz processor
[ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.15 BogoMIPS (lpj=6384300)
[ 0.004029] pid_max: default: 32768 minimum: 301
[ 0.004055] ACPI: Core revision 20140424
[ 0.004061] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.004202] ACPI: Forced DSDT copy: length 0x048D5 copied locally, original unmapped
[ 0.013785] ACPI: All ACPI Tables successfully acquired
[ 0.016055] Security Framework initialized
[ 0.016087] AppArmor: AppArmor disabled by boot time parameter
[ 0.016090] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.016124] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.016129] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.016718] Initializing cgroup subsys memory
[ 0.016732] Initializing cgroup subsys devices
[ 0.016750] Initializing cgroup subsys freezer
[ 0.016757] Initializing cgroup subsys net_cls
[ 0.016770] Initializing cgroup subsys blkio
[ 0.016782] Initializing cgroup subsys perf_event
[ 0.016787] Initializing cgroup subsys net_prio
[ 0.016835] Disabled fast string operations
[ 0.016849] mce: CPU supports 5 MCE banks
[ 0.016865] CPU0: Thermal monitoring enabled (TM1)
[ 0.016888] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.028487] Freeing SMP alternatives memory: 20K (c1711000 - c1716000)
[ 0.030624] ftrace: allocating 20754 entries in 41 pages
[ 0.040239] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040718] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.081072] smpboot: CPU0: Intel(R) Celeron(R) M processor 1.60GHz (fam: 06, model: 0d, stepping: 08)
[ 0.084000] Performance Events: p6 PMU driver.
[ 0.084000] ... version: 0
[ 0.084000] ... bit width: 32
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 00000000ffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 0
[ 0.084000] ... event mask: 0000000000000003
[ 0.084000] x86: Booted up 1 node, 1 CPUs
[ 0.084000] smpboot: Total of 1 processors activated (3192.15 BogoMIPS)
[ 0.084135] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.084251] devtmpfs: initialized
[ 0.084698] PM: Registering ACPI NVS region [mem 0x77eb3000-0x77efffff] (315392 bytes)
[ 0.086726] pinctrl core: initialized pinctrl subsystem
[ 0.086862] NET: Registered protocol family 16
[ 0.087077] cpuidle: using governor ladder
[ 0.087082] cpuidle: using governor menu
[ 0.087175] ACPI: bus type PCI registered
[ 0.087180] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.087337] PCI: MMCONFIG for domain 0000 [bus 00-0d] at [mem 0xe0000000-0xe0dfffff] (base 0xe0000000)
[ 0.087343] PCI: MMCONFIG at [mem 0xe0000000-0xe0dfffff] reserved in E820
[ 0.087346] PCI: Using MMCONFIG for extended config space
[ 0.087348] PCI: Using configuration type 1 for base access
[ 0.089219] ACPI: Added _OSI(Module Device)
[ 0.089223] ACPI: Added _OSI(Processor Device)
[ 0.089226] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.089228] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.156103] ACPI: Interpreter enabled
[ 0.156122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.156130] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.156154] ACPI: (supports S0 S3 S4 S5)
[ 0.156156] ACPI: Using IOAPIC for interrupt routing
[ 0.156294] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.163679] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.163691] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.163700] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.164582] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.164587] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.164591] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.164594] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.164598] acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.164602] acpi PNP0A03:00: host bridge window [mem 0x78000000-0xfebfffff] (ignored)
[ 0.164605] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.164609] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.164613] PCI: root bus 00: using default resources
[ 0.164619] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0d] only partially covers this bridge
[ 0.164888] PCI host bridge to bus 0000:00
[ 0.164893] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.164897] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.164901] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.164917] pci 0000:00:00.0: [1002:5a31] type 00 class 0x060000
[ 0.165079] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
[ 0.165286] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
[ 0.165318] pci 0000:00:13.0: reg 0x10: [mem 0xc0004000-0xc0004fff]
[ 0.165513] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.165611] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
[ 0.165641] pci 0000:00:13.1: reg 0x10: [mem 0xc0005000-0xc0005fff]
[ 0.165833] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.165931] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
[ 0.165966] pci 0000:00:13.2: reg 0x10: [mem 0xc0006000-0xc0006fff]
[ 0.166116] pci 0000:00:13.2: supports D1 D2
[ 0.166120] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.166189] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.166285] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
[ 0.166307] pci 0000:00:14.0: reg 0x10: [io 0x8040-0x804f]
[ 0.166324] pci 0000:00:14.0: reg 0x14: [mem 0xc0007000-0xc00073ff]
[ 0.166400] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.166538] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
[ 0.166568] pci 0000:00:14.1: reg 0x10: [io 0x8430-0x8437]
[ 0.166586] pci 0000:00:14.1: reg 0x14: [io 0x8424-0x8427]
[ 0.166603] pci 0000:00:14.1: reg 0x18: [io 0x8428-0x842f]
[ 0.166620] pci 0000:00:14.1: reg 0x1c: [io 0x8420-0x8423]
[ 0.166637] pci 0000:00:14.1: reg 0x20: [io 0x8410-0x841f]
[ 0.166674] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.166678] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.166681] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.166684] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.166856] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
[ 0.167091] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
[ 0.167206] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.167298] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
[ 0.167329] pci 0000:00:14.5: reg 0x10: [mem 0xc0007400-0xc00074ff]
[ 0.167519] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.167612] pci 0000:00:14.6: [1002:4378] type 00 class 0x070300
[ 0.167643] pci 0000:00:14.6: reg 0x10: [mem 0xc0007800-0xc00078ff]
[ 0.167832] pci 0000:00:14.6: System wakeup disabled by ACPI
[ 0.167998] pci 0000:01:05.0: [1002:5a62] type 00 class 0x030000
[ 0.168018] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.168028] pci 0000:01:05.0: reg 0x14: [io 0x9000-0x90ff]
[ 0.168037] pci 0000:01:05.0: reg 0x18: [mem 0xc0100000-0xc010ffff]
[ 0.168064] pci 0000:01:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.168094] pci 0000:01:05.0: supports D1 D2
[ 0.168184] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.168192] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.168197] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.168202] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.168331] pci 0000:09:01.0: [104c:ac56] type 02 class 0x060700
[ 0.168362] pci 0000:09:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.168422] pci 0000:09:01.0: supports D1 D2
[ 0.168425] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168551] pci 0000:09:02.0: [10ec:8139] type 00 class 0x020000
[ 0.168587] pci 0000:09:02.0: reg 0x10: [io 0xa000-0xa0ff]
[ 0.168608] pci 0000:09:02.0: reg 0x14: [mem 0xc0200000-0xc02000ff]
[ 0.168748] pci 0000:09:02.0: supports D1 D2
[ 0.168751] pci 0000:09:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.168791] pci 0000:09:02.0: System wakeup disabled by ACPI
[ 0.168934] pci 0000:00:14.4: PCI bridge to [bus 09-0e] (subtractive decode)
[ 0.168946] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.168953] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.168961] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.168965] pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.168971] pci 0000:09:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.169067] pci_bus 0000:0a: busn_res: can not insert [bus 0a-ff] under [bus 09-0e] (conflicts with (null) [bus 09-0e])
[ 0.169076] pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0d
[ 0.169099] pci_bus 0000:00: on NUMA node 0
[ 0.169549] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.169644] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.169735] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.169828] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.169919] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.170010] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.170101] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.170192] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.170754] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.170818] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.171043] vgaarb: setting as boot device: PCI:0000:01:05.0
[ 0.171048] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171050] vgaarb: loaded
[ 0.171053] vgaarb: bridge control possible 0000:01:05.0
[ 0.171160] PCI: Using ACPI for IRQ routing
[ 0.171816] PCI: pci_cache_line_size set to 64 bytes
[ 0.171887] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.171891] e820: reserve RAM buffer [mem 0x77ea0000-0x77ffffff]
[ 0.172247] Switched to clocksource refined-jiffies
[ 0.185831] pnp: PnP ACPI init
[ 0.185866] ACPI: bus type PNP registered
[ 0.186144] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.186154] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186873] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.186962] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.187040] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.187167] system 00:04: [io 0x1080] has been reserved
[ 0.187172] system 00:04: [io 0x0200-0x020f] has been reserved
[ 0.187176] system 00:04: [io 0x040b] has been reserved
[ 0.187180] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.187184] system 00:04: [io 0x04d6] has been reserved
[ 0.187189] system 00:04: [io 0x0530-0x0537] has been reserved
[ 0.187193] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.187197] system 00:04: [io 0x0c14] has been reserved
[ 0.187201] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.187205] system 00:04: [io 0x0c6c] has been reserved
[ 0.187209] system 00:04: [io 0x0c6f] has been reserved
[ 0.187215] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.187220] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.187224] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.187229] system 00:04: [io 0x8000-0x805f] could not be reserved
[ 0.187233] system 00:04: [io 0x8100-0x81ff window] has been reserved
[ 0.187238] system 00:04: [io 0x0f40-0x0f47] has been reserved
[ 0.187242] system 00:04: [io 0x0280-0x0293] has been reserved
[ 0.187246] system 00:04: [io 0x087f] has been reserved
[ 0.187251] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187381] pnp 00:05: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.187440] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.187445] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.187450] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187519] pnp: PnP ACPI: found 6 devices
[ 0.187522] ACPI: bus type PNP unregistered
[ 0.187535] PnPBIOS: Disabled by ACPI PNP
[ 0.225553] Switched to clocksource acpi_pm
[ 0.225607] pci 0000:09:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.225615] pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 09-0e] add_size 4000000
[ 0.225628] pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.225643] pci 0000:00:14.4: BAR 15: assigned [mem 0x78000000-0x7bffffff pref]
[ 0.225650] pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
[ 0.225654] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.225659] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.225666] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.225671] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.225681] pci 0000:09:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.225685] pci 0000:09:01.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.225689] pci 0000:09:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.225693] pci 0000:09:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.225699] pci 0000:09:01.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff]
[ 0.225709] pci 0000:09:01.0: BAR 15: assigned [mem 0x78000000-0x7bffffff pref]
[ 0.225715] pci 0000:09:01.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[ 0.225719] pci 0000:09:01.0: BAR 13: assigned [io 0xa400-0xa4ff]
[ 0.225723] pci 0000:09:01.0: BAR 14: assigned [io 0xa800-0xa8ff]
[ 0.225727] pci 0000:09:01.0: CardBus bridge to [bus 0a-0d]
[ 0.225731] pci 0000:09:01.0: bridge window [io 0xa400-0xa4ff]
[ 0.225739] pci 0000:09:01.0: bridge window [io 0xa800-0xa8ff]
[ 0.225747] pci 0000:09:01.0: bridge window [mem 0x78000000-0x7bffffff pref]
[ 0.225755] pci 0000:09:01.0: bridge window [mem 0xc8000000-0xcbffffff]
[ 0.225763] pci 0000:00:14.4: PCI bridge to [bus 09-0e]
[ 0.225768] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.225777] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.225785] pci 0000:00:14.4: bridge window [mem 0x78000000-0x7bffffff pref]
[ 0.225797] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.225801] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.225805] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.225809] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[ 0.225813] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.225817] pci_bus 0000:09: resource 0 [io 0xa000-0xafff]
[ 0.225820] pci_bus 0000:09: resource 1 [mem 0xc0200000-0xc02fffff]
[ 0.225824] pci_bus 0000:09: resource 2 [mem 0x78000000-0x7bffffff pref]
[ 0.225828] pci_bus 0000:09: resource 4 [io 0x0000-0xffff]
[ 0.225831] pci_bus 0000:09: resource 5 [mem 0x00000000-0xffffffff]
[ 0.225835] pci_bus 0000:0a: resource 0 [io 0xa400-0xa4ff]
[ 0.225839] pci_bus 0000:0a: resource 1 [io 0xa800-0xa8ff]
[ 0.225843] pci_bus 0000:0a: resource 2 [mem 0x78000000-0x7bffffff pref]
[ 0.225846] pci_bus 0000:0a: resource 3 [mem 0xc8000000-0xcbffffff]
[ 0.225904] NET: Registered protocol family 2
[ 0.226452] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.226503] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.226605] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.226712] TCP: reno registered
[ 0.226717] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.226742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.226857] NET: Registered protocol family 1
[ 0.226901] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.000450] pci 0000:01:05.0: Video device with shadowed ROM
[ 1.000466] PCI: CLS 32 bytes, default 64
[ 1.000596] Unpacking initramfs...
[ 1.587534] Freeing initrd memory: 14264K (f6414000 - f7202000)
[ 1.587972] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 1.588214] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.588732] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.588810] audit: initializing netlink subsys (disabled)
[ 1.588863] audit: type=2000 audit(1435251748.587:1): initialized
[ 1.589487] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.589516] zbud: loaded
[ 1.589647] VFS: Disk quotas dquot_6.5.2
[ 1.589677] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.589805] msgmni has been set to 1724
[ 1.590421] alg: No test for stdrng (krng)
[ 1.590458] bounce: pool size: 64 pages
[ 1.590487] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.590564] io scheduler noop registered
[ 1.590568] io scheduler deadline registered
[ 1.590625] io scheduler cfq registered (default)
[ 1.590833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.590870] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.590917] intel_idle: does not run on family 6 model 13
[ 1.591007] GHES: HEST is not enabled!
[ 1.591050] isapnp: Scanning for PnP cards...
[ 1.945771] isapnp: No Plug & Play device found
[ 1.945930] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.947073] Linux agpgart interface v0.103
[ 1.947434] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.950585] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.950597] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.950843] mousedev: PS/2 mouse device common for all mice
[ 1.950948] rtc_cmos 00:01: RTC can wake from S4
[ 1.951153] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.951193] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 1.951220] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.952104] TCP: cubic registered
[ 1.952130] NET: Registered protocol family 10
[ 1.952531] mip6: Mobile IPv6
[ 1.952537] NET: Registered protocol family 17
[ 1.952546] mpls_gso: MPLS GSO support
[ 1.952787] Using IPI No-Shortcut mode
[ 1.952985] registered taskstats version 1
[ 1.953507] rtc_cmos 00:01: setting system clock to 2015-06-25 17:02:29 UTC (1435251749)
[ 1.953619] PM: Hibernation image not present or could not be loaded.
[ 1.954523] Freeing unused kernel memory: 656K (c166d000 - c1711000)
[ 1.954594] Write protecting the kernel text: 4604k
[ 1.954648] Write protecting the kernel read-only data: 1452k
[ 1.954650] NX-protecting the kernel data: 3588k
[ 1.976315] systemd-udevd[54]: starting version 215
[ 1.976879] random: systemd-udevd urandom read with 2 bits of entropy available
[ 1.985826] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.021637] ACPI: bus type USB registered
[ 2.021692] usbcore: registered new interface driver usbfs
[ 2.021715] usbcore: registered new interface driver hub
[ 2.026843] usbcore: registered new device driver usb
[ 2.027916] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.028421] ehci-pci: EHCI PCI platform driver
[ 2.028699] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.028713] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 2.028824] ehci-pci 0000:00:13.2: irq 19, io mem 0xc0006000
[ 2.029403] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.036248] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.036256] ACPI: Thermal Zone [THRM] (70 C)
[ 2.038869] SCSI subsystem initialized
[ 2.040115] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.040292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.040296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.040300] usb usb1: Product: EHCI Host Controller
[ 2.040303] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 2.040306] usb usb1: SerialNumber: 0000:00:13.2
[ 2.040606] hub 1-0:1.0: USB hub found
[ 2.040622] hub 1-0:1.0: 8 ports detected
[ 2.041789] ohci-pci: OHCI PCI platform driver
[ 2.042060] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.042073] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.042129] ohci-pci 0000:00:13.0: irq 19, io mem 0xc0004000
[ 2.046811] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.046863] 8139cp 0000:09:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.047536] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.049210] 8139too 0000:09:02.0 eth0: RealTek RTL8139 at 0x0001a000, 00:16:36:2c:29:70, IRQ 21
[ 2.061091] libata version 3.00 loaded.
[ 2.100198] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.100207] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.100210] usb usb2: Product: OHCI PCI host controller
[ 2.100214] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 2.100217] usb usb2: SerialNumber: 0000:00:13.0
[ 2.100601] hub 2-0:1.0: USB hub found
[ 2.100619] hub 2-0:1.0: 4 ports detected
[ 2.102167] scsi0 : pata_atiixp
[ 2.102402] scsi1 : pata_atiixp
[ 2.102496] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 2.102499] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 2.102882] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 2.102896] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 2.102936] ohci-pci 0000:00:13.1: irq 19, io mem 0xc0005000
[ 2.160134] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.160139] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.160142] usb usb3: Product: OHCI PCI host controller
[ 2.160145] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 2.160149] usb usb3: SerialNumber: 0000:00:13.1
[ 2.160506] hub 3-0:1.0: USB hub found
[ 2.160522] hub 3-0:1.0: 4 ports detected
[ 2.265380] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.50, max UDMA/33
[ 2.265537] ata1.00: ATA-6: TOSHIBA MK6034GAX, AC101A, max UDMA/100
[ 2.265542] ata1.00: 117210240 sectors, multi 16: LBA48
[ 2.272773] ata1.00: configured for UDMA/100
[ 2.272981] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GA 1A PQ: 0 ANSI: 5
[ 2.280683] ata2.00: configured for UDMA/33
[ 2.282995] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.50 PQ: 0 ANSI: 5
[ 2.297685] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.297790] sd 0:0:0:0: [sda] Write Protect is off
[ 2.297795] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.297830] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.301858] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.301865] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.302092] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.304433] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.304560] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.356425] sda: sda1 sda2 < sda5 >
[ 2.357388] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.584044] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 2.612062] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.761133] usb 1-4: New USB device found, idVendor=0cf3, idProduct=9271
[ 2.761143] usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.761146] usb 1-4: Product: USB2.0 WLAN
[ 2.761149] usb 1-4: Manufacturer: ATHEROS
[ 2.761152] usb 1-4: SerialNumber: 12345
[ 2.809271] PM: Starting manual resume from disk
[ 2.809287] PM: Hibernation image partition 8:5 present
[ 2.809289] PM: Looking for hibernation image.
[ 2.809719] PM: Image not found (code -22)
[ 2.809722] PM: Hibernation image not present or could not be loaded.
[ 3.064059] usb 3-1: new full-speed USB device number 2 using ohci-pci
[ 3.271090] usb 3-1: New USB device found, idVendor=09da, idProduct=054f
[ 3.271099] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.271102] usb 3-1: Product: USB Device
[ 3.271106] usb 3-1: Manufacturer: A4TECH
[ 3.277253] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.290240] usbcore: registered new interface driver usbhid
[ 3.290247] usbhid: USB HID core driver
[ 3.296228] input: A4TECH USB Device as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/0003:09DA:054F.0001/input/input2
[ 3.297147] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:13.1-1/input0
[ 3.299619] input: A4TECH USB Device as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/0003:09DA:054F.0002/input/input3
[ 3.299872] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:13.1-1/input1
[ 3.584246] Switched to clocksource tsc
[ 4.888850] random: nonblocking pool is initialized
[ 5.105530] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.928835] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 8.998939] lp: driver loaded but no devices found
[ 9.031350] ppdev: user-space parallel port driver
[ 9.190009] fuse init (API version 7.23)
[ 9.231332] systemd-udevd[149]: starting version 215
[ 10.760435] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.103894] systemd-journald[144]: Received request to flush runtime journal from PID 1
[ 11.777807] tsc: Marking TSC unstable due to TSC halts in idle
[ 11.777833] ACPI: acpi_idle registered with cpuidle
[ 11.780320] Switched to clocksource acpi_pm
[ 12.062862] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 12.066112] ACPI: Lid Switch [LID]
[ 12.066244] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 12.066253] ACPI: Power Button [PWRB]
[ 12.066344] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 12.066348] ACPI: Power Button [PWRF]
[ 12.175838] ACPI: AC Adapter [ACAD] (on-line)
[ 12.313363] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.494026] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[ 12.787111] [drm] Initialized drm 1.1.0 20060810
[ 12.828691] ACPI: Battery Slot [BAT1] (battery present)
[ 12.985730] yenta_cardbus 0000:09:01.0: enabling device (0000 -> 0003)
[ 12.985910] yenta_cardbus 0000:09:01.0: CardBus bridge found [1179:ff31]
[ 12.985944] yenta_cardbus 0000:09:01.0: Using CSCINT to route CSC interrupts to PCI
[ 12.985947] yenta_cardbus 0000:09:01.0: Routing CardBus interrupts to PCI
[ 12.985956] yenta_cardbus 0000:09:01.0: TI: mfunc 0x015c1d22, devctl 0x44
[ 13.216891] yenta_cardbus 0000:09:01.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 13.216902] yenta_cardbus 0000:09:01.0: Socket status: 30000007
[ 13.216913] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 13.216919] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff:
[ 13.218920] excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff
[ 13.226388] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xc02fffff]
[ 13.226393] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xc02fffff:
[ 13.226398] excluding 0xc0200000-0xc020ffff
[ 13.226414] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge window: [mem 0x78000000-0x7bffffff pref]
[ 13.226418] pcmcia_socket pcmcia_socket0: cs: memory probe 0x78000000-0x7bffffff:
[ 13.226430] excluding 0x78000000-0x7bffffff
[ 13.393006] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.846234] [drm] radeon kernel modesetting enabled.
[ 13.846940] [drm] initializing kernel modesetting (RS400 0x1002:0x5A62 0x1179:0xFF31).
[ 13.846967] [drm] register mmio base: 0xC0100000
[ 13.846969] [drm] register mmio size: 65536
[ 13.847198] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.847208] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
[ 13.847213] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.849183] [drm] Detected VRAM RAM=128M, BAR=256M
[ 13.849191] [drm] RAM width 128bits DDR
[ 13.849507] [TTM] Zone kernel: Available graphics memory: 441710 kiB
[ 13.849510] [TTM] Zone highmem: Available graphics memory: 970418 kiB
[ 13.849512] [TTM] Initializing pool allocator
[ 13.849523] [TTM] Initializing DMA pool allocator
[ 13.849570] [drm] radeon: 128M of VRAM memory ready
[ 13.849572] [drm] radeon: 512M of GTT memory ready.
[ 13.849601] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.883563] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 13.890503] [drm] PCIE GART of 512M enabled (table at 0x0000000034780000).
[ 13.890931] radeon 0000:01:05.0: WB enabled
[ 13.890940] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xf2c3c000
[ 13.890945] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.890947] [drm] Driver supports precise vblank timestamp query.
[ 13.890951] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 13.890974] [drm] radeon: irq initialized.
[ 13.890997] [drm] Loading R300 Microcode
[ 13.916317] radeon 0000:01:05.0: firmware: failed to load radeon/R300_cp.bin (-2)
[ 13.916380] radeon 0000:01:05.0: Direct firmware load failed with error -2
[ 13.916383] radeon 0000:01:05.0: Falling back to user helper
[ 13.917782] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 13.917850] radeon 0000:01:05.0: failed initializing CP (-12).
[ 13.917905] radeon 0000:01:05.0: Disabling GPU acceleration
[ 13.917967] [drm] radeon: cp finalized
[ 13.920134] [drm] Panel ID String: SEC
[ 13.920141] [drm] Panel Size 1024x768
[ 13.948140] [drm] radeon legacy LVDS backlight initialized
[ 13.948143] [drm] Radeon Display Connectors
[ 13.948146] [drm] Connector 0:
[ 13.948148] [drm] VGA-1
[ 13.948151] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 13.948153] [drm] Encoders:
[ 13.948155] [drm] CRT1: INTERNAL_DAC2
[ 13.948158] [drm] Connector 1:
[ 13.948160] [drm] LVDS-1
[ 13.948163] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 13.948164] [drm] Encoders:
[ 13.948166] [drm] LCD1: INTERNAL_LVDS
[ 13.948168] [drm] Connector 2:
[ 13.948170] [drm] SVIDEO-1
[ 13.948172] [drm] Encoders:
[ 13.948174] [drm] TV1: INTERNAL_DAC2
[ 13.950910] snd_atiixp_modem 0000:00:14.6: MC'97 0 converters and GPIO not ready (0x1)
[ 14.027512] [drm] fb mappable at 0xD0040000
[ 14.027519] [drm] vram apper at 0xD0000000
[ 14.027521] [drm] size 3145728
[ 14.027523] [drm] fb depth is 24
[ 14.027525] [drm] pitch is 4096
[ 14.027770] fbcon: radeondrmfb (fb0) is primary device
[ 14.077988] Console: switching to colour frame buffer device 128x48
[ 14.083105] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 14.083109] radeon 0000:01:05.0: registered panic notifier
[ 14.083184] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:05.0 on minor 0
[ 14.259450] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 14.261361] excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x280-0x297 0x370-0x377
[ 14.262470] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 14.263054] excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
[ 14.263589] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 14.264923] excluding 0x878-0x87f
[ 14.265217] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 14.265639] excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 14.266087] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 14.266096] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 14.266128] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 14.266149] clean.
[ 14.266167] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 14.266184] excluding 0x60000000-0x60ffffff
[ 14.266204] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 14.267552] clean.
[ 14.284424] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0/0x0, board id: 0, fw id: 53323
[ 14.284436] psmouse serio1: synaptics: Toshiba Satellite L20 detected, limiting rate to 40pps.
[ 14.319131] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 15.374772] Adding 2421756k swap on /dev/sda5. Priority:-1 extents:1 across:2421756k FS
[ 15.839712] cfg80211: Calling CRDA to update world regulatory domain
[ 16.034055] usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
[ 16.034555] usbcore: registered new interface driver ath9k_htc
[ 16.398750] usb 1-4: firmware: direct-loading firmware htc_9271.fw
[ 16.683372] usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 16.919743] ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
[ 17.015235] cfg80211: World regulatory domain updated:
[ 17.015247] cfg80211: DFS Master region: unset
[ 17.015250] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.015254] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.015258] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.015261] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.015265] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 17.015269] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 17.015272] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 17.015275] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.015278] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 17.163778] ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
[ 17.163788] ath: EEPROM regdomain: 0x809c
[ 17.163791] ath: EEPROM indicates we should expect a country code
[ 17.163794] ath: doing EEPROM country->regdmn map search
[ 17.163796] ath: country maps to regdmn code: 0x52
[ 17.163799] ath: Country alpha2 being used: CN
[ 17.163801] ath: Regpair used: 0x52
[ 17.180537] RPC: Registered named UNIX socket transport module.
[ 17.180545] RPC: Registered udp transport module.
[ 17.180547] RPC: Registered tcp transport module.
[ 17.180549] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.244780] FS-Cache: Loaded
[ 17.275519] FS-Cache: Netfs 'nfs' registered for caching
[ 17.300070] ieee80211 phy0: Atheros AR9271 Rev:1
[ 17.301161] cfg80211: Calling CRDA for country: CN
[ 17.309974] cfg80211: Regulatory domain changed to country: CN
[ 17.309985] cfg80211: DFS Master region: FCC
[ 17.309988] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.309993] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.309997] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 17.310001] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 17.310004] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 17.310007] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 17.310010] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 17.310014] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 17.375904] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 25.133452] 8139too 0000:09:02.0 eth0: link down
[ 25.133643] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.396898] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 96.129267] wlan0: authenticate with 64:70:02:4d:cb:ea
[ 96.444397] wlan0: send auth to 64:70:02:4d:cb:ea (try 1/3)
[ 96.448450] wlan0: authenticated
[ 96.456086] wlan0: associate with 64:70:02:4d:cb:ea (try 1/3)
[ 96.460291] wlan0: RX AssocResp from 64:70:02:4d:cb:ea (capab=0x431 status=0 aid=1)
[ 96.468629] wlan0: associated
[ 96.468698] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 96.468767] cfg80211: Calling CRDA for country: PL
[ 96.599445] cfg80211: Regulatory domain changed to country: PL
[ 96.599500] cfg80211: DFS Master region: ETSI
[ 96.599503] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 96.599508] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 96.599512] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 96.599516] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 96.599519] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 96.599523] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 266.147133] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000Jeśli chodzi o firmware to nie wiem czy dobrze zrozumiałem ale jeśli chodzi o repozytoria w sources.list to mam następujące repo:
Kod:
# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official i386 kde-CD Binary-1 20150606-13:00]/ jessie main deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official i386 kde-CD Binary-1 20150606-13:00]/ jessie main deb http://ftp.pl.debian.org/debian/ jessie main deb-src http://ftp.pl.debian.org/debian/ jessie main deb http://security.debian.org/ jessie/updates main deb-src http://security.debian.org/ jessie/updates main # jessie-updates, previously known as 'volatile' deb http://ftp.pl.debian.org/debian/ jessie-updates main deb-src http://ftp.pl.debian.org/debian/ jessie-updates main # Debian 8 "Jessie" deb http://httpredir.debian.org/debian/ jessie main contrib non-free #~~~~~~Jessie~~~~~~# deb http://ftp.pl.debian.org/debian/ jessie main non-free contrib deb-src http://ftp.pl.debian.org/debian/ jessie main non-free contrib deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free deb http://ftp.pl.debian.org/debian/ jessie-updates main non-free contrib deb-src http://ftp.pl.debian.org/debian/ jessie-updates main non-free contrib #~~~~~~Backports_Jessie~~~~~~# deb http://ftp.pl.debian.org/debian/ jessie-backports main contrib non-free #~~~~~~Deb-multimedia~~~~~~# deb http://www.deb-multimedia.org/ stable main non-free deb-src http://www.deb-multimedia.org/ stable main non-free
Offline
#17 2015-06-25 19:27:04
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Blokowanie ekranu.
Masz to napisane w logach:
Kod:
[ 13.916317] radeon 0000:01:05.0: firmware: failed to load radeon/R300_cp.bin (-2) [ 13.916380] radeon 0000:01:05.0: Direct firmware load failed with error -2 [ 13.916383] radeon 0000:01:05.0: Falling back to user helper [ 13.917782] [drm:r100_cp_init] *ERROR* Failed to load firmware! [ 13.917850] radeon 0000:01:05.0: failed initializing CP (-12). [ 13.917905] radeon 0000:01:05.0: Disabling GPU acceleration[/quote]
Zainstaluj [deb]firmware-linux-nonfree[/deb] i sprawdź po restarcie komputera.
Offline
#18 2015-06-25 21:14:14
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Hej zainstalowałem firmware, zrestartowałem i... dalej to samo:(
Ale dziś jeszcze zainstalowałem
Kod:
aptitude install deb-multimedia-keyring
i teraz dzieją się jeszcze inne dziwne rzeczy.
Myślę że zrobię tak - sformatuję jeszcze raz komputer zastosuję jeszcze raz wskazówki które mi podaliście i dam wam znać.
Offline
#19 2015-06-27 08:56:00
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Jestem już po ponownej instalacji.
Zainstalowałem firmware, zastanawiam się jak wyłączyć blokowanie o którym pisał Pawlo950 bo nadal jest ten sam problem.
Czy ma ktoś jeszcze jakiś pomysł co można byłoby zrobić?
Tak wygląda var/log/Xorg.0.log
Kod:
[ 26.333]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 26.333] X Protocol Version 11, Revision 0
[ 26.333] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 26.333] Current Operating System: Linux debian 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) i686
[ 26.333] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=1f91a3ef-051a-4522-b933-ac95d14f8471 ro quiet
[ 26.333] Build Date: 11 February 2015 01:14:26AM
[ 26.333] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 26.333] Current version of pixman: 0.32.6
[ 26.333] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.333] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.333] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 27 09:40:00 2015
[ 26.387] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.423] (==) No Layout section. Using the first Screen section.
[ 26.423] (==) No screen section available. Using defaults.
[ 26.423] (**) |-->Screen "Default Screen Section" (0)
[ 26.423] (**) | |-->Monitor "<default monitor>"
[ 26.425] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 26.425] (==) Automatically adding devices
[ 26.425] (==) Automatically enabling devices
[ 26.425] (==) Automatically adding GPU devices
[ 26.479] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 26.479] Entry deleted from font path.
[ 26.516] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 26.516] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.516] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.516] (II) Loader magic: 0xb7724700
[ 26.516] (II) Module ABI versions:
[ 26.516] X.Org ANSI C Emulation: 0.4
[ 26.516] X.Org Video Driver: 18.0
[ 26.516] X.Org XInput driver : 21.0
[ 26.516] X.Org Server Extension : 8.0
[ 26.517] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 26.518] (--) PCI:*(0:1:5:0) 1002:5a62:1179:ff31 rev 0, Mem @ 0xd0000000/268435456, 0xc0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 26.529] (II) LoadModule: "glx"
[ 26.542] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.713] (II) Module glx: vendor="X.Org Foundation"
[ 26.713] compiled for 1.16.4, module version = 1.0.0
[ 26.713] ABI class: X.Org Server Extension, version 8.0
[ 26.713] (==) AIGLX enabled
[ 26.713] (==) Matched ati as autoconfigured driver 0
[ 26.713] (==) Matched ati as autoconfigured driver 1
[ 26.713] (==) Matched modesetting as autoconfigured driver 2
[ 26.713] (==) Matched fbdev as autoconfigured driver 3
[ 26.713] (==) Matched vesa as autoconfigured driver 4
[ 26.713] (==) Assigned the driver to the xf86ConfigLayout
[ 26.713] (II) LoadModule: "ati"
[ 26.740] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 26.759] (II) Module ati: vendor="X.Org Foundation"
[ 26.759] compiled for 1.16.1, module version = 7.5.0
[ 26.759] Module class: X.Org Video Driver
[ 26.759] ABI class: X.Org Video Driver, version 18.0
[ 26.759] (II) LoadModule: "radeon"
[ 26.759] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.833] (II) Module radeon: vendor="X.Org Foundation"
[ 26.833] compiled for 1.16.1, module version = 7.5.0
[ 26.833] Module class: X.Org Video Driver
[ 26.833] ABI class: X.Org Video Driver, version 18.0
[ 26.833] (II) LoadModule: "modesetting"
[ 26.834] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 26.853] (II) Module modesetting: vendor="X.Org Foundation"
[ 26.853] compiled for 1.15.99.904, module version = 0.9.0
[ 26.853] Module class: X.Org Video Driver
[ 26.853] ABI class: X.Org Video Driver, version 18.0
[ 26.853] (II) LoadModule: "fbdev"
[ 26.854] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.863] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.863] compiled for 1.15.99.904, module version = 0.4.4
[ 26.863] Module class: X.Org Video Driver
[ 26.863] ABI class: X.Org Video Driver, version 18.0
[ 26.863] (II) LoadModule: "vesa"
[ 26.864] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.885] (II) Module vesa: vendor="X.Org Foundation"
[ 26.885] compiled for 1.15.99.904, module version = 2.3.3
[ 26.885] Module class: X.Org Video Driver
[ 26.885] ABI class: X.Org Video Driver, version 18.0
[ 26.885] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 26.896] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 26.896] (II) FBDEV: driver for framebuffer: fbdev
[ 26.896] (II) VESA: driver for VESA chipsets: vesa
[ 26.896] (++) using VT number 7
[ 26.922] (II) [KMS] Kernel modesetting enabled.
[ 26.922] (WW) Falling back to old probe method for modesetting
[ 26.922] (WW) Falling back to old probe method for fbdev
[ 26.922] (II) Loading sub module "fbdevhw"
[ 26.922] (II) LoadModule: "fbdevhw"
[ 26.922] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 26.946] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 26.946] compiled for 1.16.4, module version = 0.0.2
[ 26.946] ABI class: X.Org Video Driver, version 18.0
[ 26.946] (WW) Falling back to old probe method for vesa
[ 26.947] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.947] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 26.947] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.947] (==) RADEON(0): Default visual is TrueColor
[ 26.947] (==) RADEON(0): RGB weight 888
[ 26.947] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 26.947] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5A62 (PCIE)" (ChipID = 0x5a62)
[ 26.947] (II) Loading sub module "dri2"
[ 26.947] (II) LoadModule: "dri2"
[ 26.947] (II) Module "dri2" already built-in
[ 26.947] (II) Loading sub module "exa"
[ 26.947] (II) LoadModule: "exa"
[ 26.947] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 26.974] (II) Module exa: vendor="X.Org Foundation"
[ 26.974] compiled for 1.16.4, module version = 2.6.0
[ 26.974] ABI class: X.Org Video Driver, version 18.0
[ 26.974] (II) RADEON(0): KMS Color Tiling: enabled
[ 26.974] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 26.974] (II) RADEON(0): KMS Pageflipping: enabled
[ 26.974] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 26.997] (II) RADEON(0): Output VGA-0 has no monitor section
[ 26.997] (II) RADEON(0): Output LVDS has no monitor section
[ 26.997] (II) RADEON(0): Output S-video has no monitor section
[ 27.021] (II) RADEON(0): EDID for output VGA-0
[ 27.022] (II) RADEON(0): EDID for output LVDS
[ 27.022] (II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
[ 27.022] (II) RADEON(0): Year: 2003 Week: 0
[ 27.022] (II) RADEON(0): EDID Version: 1.3
[ 27.022] (II) RADEON(0): Digital Display Input
[ 27.022] (II) RADEON(0): Max Image Size [cm]: horiz.: 31 vert.: 23
[ 27.022] (II) RADEON(0): Gamma: 2.20
[ 27.022] (II) RADEON(0): No DPMS capabilities specified
[ 27.022] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.022] (II) RADEON(0): First detailed timing is preferred mode
[ 27.022] (II) RADEON(0): redX: 0.589 redY: 0.337 greenX: 0.322 greenY: 0.524
[ 27.022] (II) RADEON(0): blueX: 0.152 blueY: 0.137 whiteX: 0.315 whiteY: 0.330
[ 27.022] (II) RADEON(0): Manufacturer's mask: 0
[ 27.022] (II) RADEON(0): Supported detailed timing:
[ 27.022] (II) RADEON(0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 27.022] (II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 27.022] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 27.022] (II) RADEON(0): Unknown vendor-specific block f
[ 27.022] (II) RADEON(0): SAMSUNG
[ 27.022] (II) RADEON(0): LTN150XB-L03
[ 27.022] (II) RADEON(0): EDID (in hex):
[ 27.022] (II) RADEON(0): 00ffffffffffff004ca3000000000000
[ 27.022] (II) RADEON(0): 000d0103801f17780ad90e9656528627
[ 27.022] (II) RADEON(0): 23505400000001010101010101010101
[ 27.022] (II) RADEON(0): 01010101010164190040410026301888
[ 27.022] (II) RADEON(0): 360030e4100000190000000f00047e18
[ 27.022] (II) RADEON(0): ff0105026f18ff027401000000fe0053
[ 27.022] (II) RADEON(0): 414d53554e470a2020202020000000fe
[ 27.022] (II) RADEON(0): 004c544e31353058422d4c30330a0049
[ 27.022] (II) RADEON(0): Printing probed modes for output LVDS
[ 27.022] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 27.022] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 27.022] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 27.022] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 27.022] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 27.022] (II) RADEON(0): EDID for output S-video
[ 27.022] (II) RADEON(0): Output VGA-0 disconnected
[ 27.022] (II) RADEON(0): Output LVDS connected
[ 27.022] (II) RADEON(0): Output S-video disconnected
[ 27.022] (II) RADEON(0): Using exact sizes for initial modes
[ 27.022] (II) RADEON(0): Output LVDS using initial mode 1024x768
[ 27.022] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 27.022] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7cc0000
[ 27.022] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 27.022] (==) RADEON(0): DPI set to (96, 96)
[ 27.022] (II) Loading sub module "fb"
[ 27.022] (II) LoadModule: "fb"
[ 27.023] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.042] (II) Module fb: vendor="X.Org Foundation"
[ 27.042] compiled for 1.16.4, module version = 1.0.0
[ 27.042] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.042] (II) Loading sub module "ramdac"
[ 27.042] (II) LoadModule: "ramdac"
[ 27.042] (II) Module "ramdac" already built-in
[ 27.042] (II) UnloadModule: "modesetting"
[ 27.042] (II) Unloading modesetting
[ 27.042] (II) UnloadModule: "fbdev"
[ 27.042] (II) Unloading fbdev
[ 27.042] (II) UnloadSubModule: "fbdevhw"
[ 27.042] (II) Unloading fbdevhw
[ 27.042] (II) UnloadModule: "vesa"
[ 27.042] (II) Unloading vesa
[ 27.042] (--) Depth 24 pixmap format is 32 bpp
[ 27.044] (II) RADEON(0): [DRI2] Setup complete
[ 27.044] (II) RADEON(0): [DRI2] DRI driver: r300
[ 27.044] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 27.044] (II) RADEON(0): Front buffer size: 3072K
[ 27.044] (II) RADEON(0): VRAM usage limit set to 112176K
[ 27.066] (==) RADEON(0): Backing store enabled
[ 27.067] (II) RADEON(0): Direct rendering enabled
[ 27.067] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 27.067] (II) EXA(0): Driver allocated offscreen pixmaps
[ 27.067] (II) EXA(0): Driver registered support for the following operations:
[ 27.067] (II) Solid
[ 27.067] (II) Copy
[ 27.067] (II) Composite (RENDER acceleration)
[ 27.067] (II) UploadToScreen
[ 27.067] (II) DownloadFromScreen
[ 27.067] (II) RADEON(0): Acceleration enabled
[ 27.067] (==) RADEON(0): DPMS enabled
[ 27.067] (==) RADEON(0): Silken mouse enabled
[ 27.068] (II) RADEON(0): Set up textured video
[ 27.068] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 27.068] (II) RADEON(0): [XvMC] Extension initialized.
[ 27.068] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 27.070] (--) RandR disabled
[ 27.094] (II) SELinux: Disabled on system
[ 28.224] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.224] (II) AIGLX: enabled GLX_ARB_create_context
[ 28.224] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 28.224] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 28.224] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.224] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 28.224] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 28.224] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 28.224] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.226] (II) AIGLX: Loaded and initialized r300
[ 28.226] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.227] (II) RADEON(0): Setting screen physical size to 270 x 203
[ 28.644] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 28.644] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.644] (II) LoadModule: "evdev"
[ 28.662] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.719] (II) Module evdev: vendor="X.Org Foundation"
[ 28.720] compiled for 1.16.0, module version = 2.9.0
[ 28.720] Module class: X.Org XInput Driver
[ 28.720] ABI class: X.Org XInput driver, version 21.0
[ 28.720] (II) Using input driver 'evdev' for 'Power Button'
[ 28.720] (**) Power Button: always reports core events
[ 28.720] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 28.720] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.720] (--) evdev: Power Button: Found keys
[ 28.720] (II) evdev: Power Button: Configuring as keyboard
[ 28.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 28.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.720] (**) Option "xkb_rules" "evdev"
[ 28.720] (**) Option "xkb_model" "pc105"
[ 28.720] (**) Option "xkb_layout" "pl"
[ 28.776] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 28.776] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.776] (II) Using input driver 'evdev' for 'Power Button'
[ 28.776] (**) Power Button: always reports core events
[ 28.776] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 28.776] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.776] (--) evdev: Power Button: Found keys
[ 28.776] (II) evdev: Power Button: Configuring as keyboard
[ 28.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 28.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 28.776] (**) Option "xkb_rules" "evdev"
[ 28.776] (**) Option "xkb_model" "pc105"
[ 28.776] (**) Option "xkb_layout" "pl"
[ 28.777] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 28.777] (II) No input driver specified, ignoring this device.
[ 28.777] (II) This device may have been added with another device file.
[ 28.778] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event1)
[ 28.778] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[ 28.778] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
[ 28.778] (**) A4Tech USB Mouse: always reports core events
[ 28.778] (**) evdev: A4Tech USB Mouse: Device: "/dev/input/event1"
[ 28.778] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xc10a
[ 28.778] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons
[ 28.778] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s)
[ 28.778] (--) evdev: A4Tech USB Mouse: Found relative axes
[ 28.778] (--) evdev: A4Tech USB Mouse: Found x and y relative axes
[ 28.778] (--) evdev: A4Tech USB Mouse: Found absolute axes
[ 28.778] (II) evdev: A4Tech USB Mouse: Forcing absolute x/y axes to exist.
[ 28.778] (II) evdev: A4Tech USB Mouse: Configuring as mouse
[ 28.778] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
[ 28.778] (**) evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[ 28.779] (**) evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.779] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-4/3-4:1.0/0003:09DA:C10A.0001/input/input2/event1"
[ 28.779] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 8)
[ 28.779] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
[ 28.779] (WW) evdev: A4Tech USB Mouse: ignoring absolute axes.
[ 28.779] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[ 28.779] (**) A4Tech USB Mouse: (accel) acceleration profile 0
[ 28.779] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
[ 28.779] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
[ 28.780] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0)
[ 28.780] (II) No input driver specified, ignoring this device.
[ 28.780] (II) This device may have been added with another device file.
[ 28.780] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 28.780] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 28.780] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 28.780] (**) AT Translated Set 2 keyboard: always reports core events
[ 28.780] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 28.780] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 28.780] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 28.780] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 28.780] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 28.780] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 28.780] (**) Option "xkb_rules" "evdev"
[ 28.780] (**) Option "xkb_model" "pc105"
[ 28.780] (**) Option "xkb_layout" "pl"
[ 28.781] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 28.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 28.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 28.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 28.781] (II) LoadModule: "synaptics"
[ 28.782] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 28.806] (II) Module synaptics: vendor="X.Org Foundation"
[ 28.806] compiled for 1.16.0.901, module version = 1.8.99
[ 28.806] Module class: X.Org XInput Driver
[ 28.807] ABI class: X.Org XInput driver, version 21.0
[ 28.807] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 28.807] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.807] (**) Option "Device" "/dev/input/event6"
[ 28.807] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 85)
[ 28.807] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 94)
[ 28.807] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 28.807] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 28.807] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 28.807] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 28.807] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 28.807] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.807] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 28.807] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 28.807] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 28.807] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 28.807] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 28.808] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 28.808] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 28.808] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 28.808] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 28.808] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 28.808] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 28.808] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 28.809] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 28.809] (II) No input driver specified, ignoring this device.
[ 28.809] (II) This device may have been added with another device file.
[ 305.815] (II) RADEON(0): EDID vendor "SEC", prod id 0
[ 305.815] (II) RADEON(0): Printing DDC gathered Modelines:
[ 305.815] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 311.609] (II) RADEON(0): EDID vendor "SEC", prod id 0
[ 311.610] (II) RADEON(0): Printing DDC gathered Modelines:
[ 311.610] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)Ostatnio edytowany przez Przemo82 (2015-06-27 09:56:19)
Offline
#20 2015-06-27 09:57:48
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Musiałem rozdzielić posta bo miał za dużo znaków więc kod
Kod:
dmesg
Kod:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24)
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077e9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077ea0000-0x0000000077eb2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077eb3000-0x0000000077efffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077f00000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.34 present.
[ 0.000000] DMI: TOSHIBA Satellite L20 /Satellite L20 , BIOS V1.90 01/05/06
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x77ea0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 060000000 mask FF0000000 write-back
[ 0.000000] 3 base 070000000 mask FF8000000 write-back
[ 0.000000] 4 base 077F00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [mem 0x000f73b0-0x000f73bf] mapped at [c00f73b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] BRK [0x01799000, 0x0179afff] PGTABLE
[ 0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b0000-0x3714ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F7450 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x77EAE1D6 000038 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x77EB2F00 000074 (v01 ATI Goldfish 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 0x77EAE62B 0048D5 (v01 ATI SB400 06040000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0x77EB3FC0 000040
[ 0.000000] ACPI: APIC 0x77EB2F74 000050 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x77EB2FC4 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 0x77EAE410 00021B (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
[ 0.000000] ACPI: SSDT 0x77EAE20E 000202 (v01 PmRef CpuPm 00003000 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1032MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x77e9ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x77e9ffff]
[ 0.000000] On node 0 totalpages: 491070
[ 0.000000] free_area_init_node: node 0, pgdat c1658ec0, node_mem_map f53b0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2066 pages used for memmap
[ 0.000000] HighMem zone: 264354 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x82
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x78000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75e4000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489298
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=1f91a3ef-051a-4522-b933-ac95d14f8471 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:00077ea0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1925184K/1964280K available (4599K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 39096K reserved, 1057416K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc166d000 - 0xc1711000 ( 656 kB)
.data : 0xc147e240 - 0xc166b880 (1973 kB)
.text : 0xc1000000 - 0xc147e240 (4600 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f4c06000 soft=f4c08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1595.983 MHz processor
[ 0.008024] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.96 BogoMIPS (lpj=6383932)
[ 0.008031] pid_max: default: 32768 minimum: 301
[ 0.008059] ACPI: Core revision 20140424
[ 0.008066] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.008214] ACPI: Forced DSDT copy: length 0x048D5 copied locally, original unmapped
[ 0.018024] ACPI: All ACPI Tables successfully acquired
[ 0.020056] Security Framework initialized
[ 0.020089] AppArmor: AppArmor disabled by boot time parameter
[ 0.020092] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.020128] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020133] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020733] Initializing cgroup subsys memory
[ 0.020747] Initializing cgroup subsys devices
[ 0.020765] Initializing cgroup subsys freezer
[ 0.020772] Initializing cgroup subsys net_cls
[ 0.020785] Initializing cgroup subsys blkio
[ 0.020797] Initializing cgroup subsys perf_event
[ 0.020802] Initializing cgroup subsys net_prio
[ 0.020851] Disabled fast string operations
[ 0.020866] mce: CPU supports 5 MCE banks
[ 0.020881] CPU0: Thermal monitoring enabled (TM1)
[ 0.020903] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.032649] Freeing SMP alternatives memory: 20K (c1711000 - c1716000)
[ 0.034781] ftrace: allocating 20754 entries in 41 pages
[ 0.044241] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044724] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.085229] smpboot: CPU0: Intel(R) Celeron(R) M processor 1.60GHz (fam: 06, model: 0d, stepping: 08)
[ 0.088000] Performance Events: p6 PMU driver.
[ 0.088000] ... version: 0
[ 0.088000] ... bit width: 32
[ 0.088000] ... generic registers: 2
[ 0.088000] ... value mask: 00000000ffffffff
[ 0.088000] ... max period: 000000007fffffff
[ 0.088000] ... fixed-purpose events: 0
[ 0.088000] ... event mask: 0000000000000003
[ 0.088000] x86: Booted up 1 node, 1 CPUs
[ 0.088000] smpboot: Total of 1 processors activated (3191.96 BogoMIPS)
[ 0.088131] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088244] devtmpfs: initialized
[ 0.088689] PM: Registering ACPI NVS region [mem 0x77eb3000-0x77efffff] (315392 bytes)
[ 0.090717] pinctrl core: initialized pinctrl subsystem
[ 0.090852] NET: Registered protocol family 16
[ 0.091068] cpuidle: using governor ladder
[ 0.091073] cpuidle: using governor menu
[ 0.091166] ACPI: bus type PCI registered
[ 0.091171] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.091328] PCI: MMCONFIG for domain 0000 [bus 00-0d] at [mem 0xe0000000-0xe0dfffff] (base 0xe0000000)
[ 0.091334] PCI: MMCONFIG at [mem 0xe0000000-0xe0dfffff] reserved in E820
[ 0.091337] PCI: Using MMCONFIG for extended config space
[ 0.091339] PCI: Using configuration type 1 for base access
[ 0.093201] ACPI: Added _OSI(Module Device)
[ 0.093206] ACPI: Added _OSI(Processor Device)
[ 0.093208] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.093211] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.160103] ACPI: Interpreter enabled
[ 0.160121] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.160129] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.160153] ACPI: (supports S0 S3 S4 S5)
[ 0.160156] ACPI: Using IOAPIC for interrupt routing
[ 0.160292] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.167769] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.167782] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.167791] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.168673] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.168678] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.168682] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.168686] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.168689] acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.168693] acpi PNP0A03:00: host bridge window [mem 0x78000000-0xfebfffff] (ignored)
[ 0.168697] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.168700] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.168704] PCI: root bus 00: using default resources
[ 0.168710] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0d] only partially covers this bridge
[ 0.168979] PCI host bridge to bus 0000:00
[ 0.168985] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.168989] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.168992] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.169009] pci 0000:00:00.0: [1002:5a31] type 00 class 0x060000
[ 0.169170] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
[ 0.169378] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
[ 0.169411] pci 0000:00:13.0: reg 0x10: [mem 0xc0004000-0xc0004fff]
[ 0.169608] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.169705] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
[ 0.169736] pci 0000:00:13.1: reg 0x10: [mem 0xc0005000-0xc0005fff]
[ 0.169929] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.170027] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
[ 0.170062] pci 0000:00:13.2: reg 0x10: [mem 0xc0006000-0xc0006fff]
[ 0.170213] pci 0000:00:13.2: supports D1 D2
[ 0.170216] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.170286] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.170382] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
[ 0.170404] pci 0000:00:14.0: reg 0x10: [io 0x8040-0x804f]
[ 0.170421] pci 0000:00:14.0: reg 0x14: [mem 0xc0007000-0xc00073ff]
[ 0.170497] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.170635] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
[ 0.170665] pci 0000:00:14.1: reg 0x10: [io 0x8430-0x8437]
[ 0.170683] pci 0000:00:14.1: reg 0x14: [io 0x8424-0x8427]
[ 0.170700] pci 0000:00:14.1: reg 0x18: [io 0x8428-0x842f]
[ 0.170717] pci 0000:00:14.1: reg 0x1c: [io 0x8420-0x8423]
[ 0.170735] pci 0000:00:14.1: reg 0x20: [io 0x8410-0x841f]
[ 0.170772] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.170775] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.170778] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.170782] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.170953] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
[ 0.171188] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
[ 0.171305] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.171398] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
[ 0.171428] pci 0000:00:14.5: reg 0x10: [mem 0xc0007400-0xc00074ff]
[ 0.171619] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.171712] pci 0000:00:14.6: [1002:4378] type 00 class 0x070300
[ 0.171742] pci 0000:00:14.6: reg 0x10: [mem 0xc0007800-0xc00078ff]
[ 0.171933] pci 0000:00:14.6: System wakeup disabled by ACPI
[ 0.172105] pci 0000:01:05.0: [1002:5a62] type 00 class 0x030000
[ 0.172122] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.172132] pci 0000:01:05.0: reg 0x14: [io 0x9000-0x90ff]
[ 0.172141] pci 0000:01:05.0: reg 0x18: [mem 0xc0100000-0xc010ffff]
[ 0.172168] pci 0000:01:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.172198] pci 0000:01:05.0: supports D1 D2
[ 0.172288] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.172295] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.172300] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.172306] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.172434] pci 0000:09:01.0: [104c:ac56] type 02 class 0x060700
[ 0.172466] pci 0000:09:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.172526] pci 0000:09:01.0: supports D1 D2
[ 0.172529] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172655] pci 0000:09:02.0: [10ec:8139] type 00 class 0x020000
[ 0.172691] pci 0000:09:02.0: reg 0x10: [io 0xa000-0xa0ff]
[ 0.172711] pci 0000:09:02.0: reg 0x14: [mem 0xc0200000-0xc02000ff]
[ 0.172852] pci 0000:09:02.0: supports D1 D2
[ 0.172855] pci 0000:09:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.172895] pci 0000:09:02.0: System wakeup disabled by ACPI
[ 0.173038] pci 0000:00:14.4: PCI bridge to [bus 09-0e] (subtractive decode)
[ 0.173050] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.173057] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.173065] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.173069] pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.173076] pci 0000:09:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.173172] pci_bus 0000:0a: busn_res: can not insert [bus 0a-ff] under [bus 09-0e] (conflicts with (null) [bus 09-0e])
[ 0.173180] pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0d
[ 0.173203] pci_bus 0000:00: on NUMA node 0
[ 0.173658] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.173753] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.173844] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.173938] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.174029] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.174119] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.174210] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.174301] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.174864] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.174927] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.175155] vgaarb: setting as boot device: PCI:0000:01:05.0
[ 0.175160] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.175162] vgaarb: loaded
[ 0.175165] vgaarb: bridge control possible 0000:01:05.0
[ 0.175274] PCI: Using ACPI for IRQ routing
[ 0.175931] PCI: pci_cache_line_size set to 64 bytes
[ 0.176007] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.176012] e820: reserve RAM buffer [mem 0x77ea0000-0x77ffffff]
[ 0.176365] Switched to clocksource refined-jiffies
[ 0.189928] pnp: PnP ACPI init
[ 0.189964] ACPI: bus type PNP registered
[ 0.190238] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.190248] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190966] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.191054] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.191132] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.191258] system 00:04: [io 0x1080] has been reserved
[ 0.191263] system 00:04: [io 0x0200-0x020f] has been reserved
[ 0.191267] system 00:04: [io 0x040b] has been reserved
[ 0.191271] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.191275] system 00:04: [io 0x04d6] has been reserved
[ 0.191280] system 00:04: [io 0x0530-0x0537] has been reserved
[ 0.191284] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.191288] system 00:04: [io 0x0c14] has been reserved
[ 0.191292] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.191296] system 00:04: [io 0x0c6c] has been reserved
[ 0.191301] system 00:04: [io 0x0c6f] has been reserved
[ 0.191307] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.191311] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.191315] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.191320] system 00:04: [io 0x8000-0x805f] could not be reserved
[ 0.191325] system 00:04: [io 0x8100-0x81ff window] has been reserved
[ 0.191329] system 00:04: [io 0x0f40-0x0f47] has been reserved
[ 0.191333] system 00:04: [io 0x0280-0x0293] has been reserved
[ 0.191337] system 00:04: [io 0x087f] has been reserved
[ 0.191342] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.191472] pnp 00:05: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.191531] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.191536] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.191541] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.191611] pnp: PnP ACPI: found 6 devices
[ 0.191613] ACPI: bus type PNP unregistered
[ 0.191629] PnPBIOS: Disabled by ACPI PNP
[ 0.229632] Switched to clocksource acpi_pm
[ 0.229686] pci 0000:09:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.229694] pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 09-0e] add_size 4000000
[ 0.229706] pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.229722] pci 0000:00:14.4: BAR 15: assigned [mem 0x78000000-0x7bffffff pref]
[ 0.229729] pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
[ 0.229734] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.229739] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.229745] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.229750] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.229761] pci 0000:09:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.229765] pci 0000:09:01.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.229769] pci 0000:09:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.229772] pci 0000:09:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.229779] pci 0000:09:01.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff]
[ 0.229788] pci 0000:09:01.0: BAR 15: assigned [mem 0x78000000-0x7bffffff pref]
[ 0.229794] pci 0000:09:01.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[ 0.229798] pci 0000:09:01.0: BAR 13: assigned [io 0xa400-0xa4ff]
[ 0.229802] pci 0000:09:01.0: BAR 14: assigned [io 0xa800-0xa8ff]
[ 0.229807] pci 0000:09:01.0: CardBus bridge to [bus 0a-0d]
[ 0.229810] pci 0000:09:01.0: bridge window [io 0xa400-0xa4ff]
[ 0.229818] pci 0000:09:01.0: bridge window [io 0xa800-0xa8ff]
[ 0.229827] pci 0000:09:01.0: bridge window [mem 0x78000000-0x7bffffff pref]
[ 0.229835] pci 0000:09:01.0: bridge window [mem 0xc8000000-0xcbffffff]
[ 0.229842] pci 0000:00:14.4: PCI bridge to [bus 09-0e]
[ 0.229848] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.229857] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.229864] pci 0000:00:14.4: bridge window [mem 0x78000000-0x7bffffff pref]
[ 0.229877] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.229881] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.229885] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.229888] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[ 0.229892] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.229896] pci_bus 0000:09: resource 0 [io 0xa000-0xafff]
[ 0.229900] pci_bus 0000:09: resource 1 [mem 0xc0200000-0xc02fffff]
[ 0.229904] pci_bus 0000:09: resource 2 [mem 0x78000000-0x7bffffff pref]
[ 0.229907] pci_bus 0000:09: resource 4 [io 0x0000-0xffff]
[ 0.229911] pci_bus 0000:09: resource 5 [mem 0x00000000-0xffffffff]
[ 0.229915] pci_bus 0000:0a: resource 0 [io 0xa400-0xa4ff]
[ 0.229918] pci_bus 0000:0a: resource 1 [io 0xa800-0xa8ff]
[ 0.229922] pci_bus 0000:0a: resource 2 [mem 0x78000000-0x7bffffff pref]
[ 0.229925] pci_bus 0000:0a: resource 3 [mem 0xc8000000-0xcbffffff]
[ 0.229984] NET: Registered protocol family 2
[ 0.230528] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.230578] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.230680] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.230795] TCP: reno registered
[ 0.230800] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.230825] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.230940] NET: Registered protocol family 1
[ 0.230984] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.004442] pci 0000:01:05.0: Video device with shadowed ROM
[ 1.004459] PCI: CLS 32 bytes, default 64
[ 1.004583] Unpacking initramfs...
[ 1.612661] Freeing initrd memory: 14976K (f62b0000 - f7150000)
[ 1.613103] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 1.613264] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.613783] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.613856] audit: initializing netlink subsys (disabled)
[ 1.613908] audit: type=2000 audit(1435390775.611:1): initialized
[ 1.614537] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.614567] zbud: loaded
[ 1.614694] VFS: Disk quotas dquot_6.5.2
[ 1.614723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.614854] msgmni has been set to 1724
[ 1.615465] alg: No test for stdrng (krng)
[ 1.615501] bounce: pool size: 64 pages
[ 1.615527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.615605] io scheduler noop registered
[ 1.615609] io scheduler deadline registered
[ 1.615665] io scheduler cfq registered (default)
[ 1.615878] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.615916] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.615962] intel_idle: does not run on family 6 model 13
[ 1.616134] GHES: HEST is not enabled!
[ 1.616178] isapnp: Scanning for PnP cards...
[ 1.970864] isapnp: No Plug & Play device found
[ 1.971023] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.972183] Linux agpgart interface v0.103
[ 1.972546] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.976569] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.976580] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.976825] mousedev: PS/2 mouse device common for all mice
[ 1.976928] rtc_cmos 00:01: RTC can wake from S4
[ 1.977132] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.977170] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 1.977196] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.978053] TCP: cubic registered
[ 1.978079] NET: Registered protocol family 10
[ 1.978492] mip6: Mobile IPv6
[ 1.978499] NET: Registered protocol family 17
[ 1.978508] mpls_gso: MPLS GSO support
[ 1.978753] Using IPI No-Shortcut mode
[ 1.978945] registered taskstats version 1
[ 1.979454] rtc_cmos 00:01: setting system clock to 2015-06-27 07:39:36 UTC (1435390776)
[ 1.979570] PM: Hibernation image not present or could not be loaded.
[ 1.980494] Freeing unused kernel memory: 656K (c166d000 - c1711000)
[ 1.980575] Write protecting the kernel text: 4604k
[ 1.980629] Write protecting the kernel read-only data: 1452k
[ 1.980631] NX-protecting the kernel data: 3588k
[ 1.998951] systemd-udevd[54]: starting version 215
[ 1.999520] random: systemd-udevd urandom read with 2 bits of entropy available
[ 2.012155] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.042469] ACPI: bus type USB registered
[ 2.042534] usbcore: registered new interface driver usbfs
[ 2.042557] usbcore: registered new interface driver hub
[ 2.050968] SCSI subsystem initialized
[ 2.052156] usbcore: registered new device driver usb
[ 2.053206] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.053797] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.054113] ehci-pci: EHCI PCI platform driver
[ 2.054412] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.054427] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 2.054536] ehci-pci 0000:00:13.2: irq 19, io mem 0xc0006000
[ 2.064063] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.064239] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.064243] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.064247] usb usb1: Product: EHCI Host Controller
[ 2.064250] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 2.064253] usb usb1: SerialNumber: 0000:00:13.2
[ 2.064546] hub 1-0:1.0: USB hub found
[ 2.064562] hub 1-0:1.0: 8 ports detected
[ 2.065356] ohci-pci: OHCI PCI platform driver
[ 2.065601] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.065612] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.065655] ohci-pci 0000:00:13.0: irq 19, io mem 0xc0004000
[ 2.072245] libata version 3.00 loaded.
[ 2.073987] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.073992] ACPI: Thermal Zone [THRM] (71 C)
[ 2.076462] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.076509] 8139cp 0000:09:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.077154] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.078735] 8139too 0000:09:02.0 eth0: RealTek RTL8139 at 0x0001a000, 00:16:36:2c:29:70, IRQ 21
[ 2.124178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.124187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.124191] usb usb2: Product: OHCI PCI host controller
[ 2.124194] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 2.124197] usb usb2: SerialNumber: 0000:00:13.0
[ 2.124580] hub 2-0:1.0: USB hub found
[ 2.124597] hub 2-0:1.0: 4 ports detected
[ 2.126139] scsi0 : pata_atiixp
[ 2.126376] scsi1 : pata_atiixp
[ 2.126470] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 2.126473] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 2.126863] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 2.126875] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 2.126916] ohci-pci 0000:00:13.1: irq 19, io mem 0xc0005000
[ 2.184133] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.184139] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.184142] usb usb3: Product: OHCI PCI host controller
[ 2.184146] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 2.184149] usb usb3: SerialNumber: 0000:00:13.1
[ 2.184515] hub 3-0:1.0: USB hub found
[ 2.184530] hub 3-0:1.0: 4 ports detected
[ 2.289386] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.50, max UDMA/33
[ 2.289542] ata1.00: ATA-6: TOSHIBA MK6034GAX, AC101A, max UDMA/100
[ 2.289546] ata1.00: 117210240 sectors, multi 16: LBA48
[ 2.296774] ata1.00: configured for UDMA/100
[ 2.296981] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GA 1A PQ: 0 ANSI: 5
[ 2.304709] ata2.00: configured for UDMA/33
[ 2.306996] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.50 PQ: 0 ANSI: 5
[ 2.321625] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.321717] sd 0:0:0:0: [sda] Write Protect is off
[ 2.321721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.321758] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.325845] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.325852] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.326075] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.328483] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.328613] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.376090] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 2.380793] sda: sda1 sda2 < sda5 >
[ 2.381693] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.525430] usb 1-4: New USB device found, idVendor=0cf3, idProduct=9271
[ 2.525440] usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.525443] usb 1-4: Product: USB2.0 WLAN
[ 2.525446] usb 1-4: Manufacturer: ATHEROS
[ 2.525449] usb 1-4: SerialNumber: 12345
[ 2.612043] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 2.844867] PM: Starting manual resume from disk
[ 2.844881] PM: Hibernation image partition 8:5 present
[ 2.844883] PM: Looking for hibernation image.
[ 2.845314] PM: Image not found (code -22)
[ 2.845317] PM: Hibernation image not present or could not be loaded.
[ 2.884113] usb 3-4: new low-speed USB device number 2 using ohci-pci
[ 3.092094] usb 3-4: New USB device found, idVendor=09da, idProduct=c10a
[ 3.092104] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.092107] usb 3-4: Product: USB Mouse
[ 3.092110] usb 3-4: Manufacturer: A4Tech
[ 3.097103] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.104334] usbcore: registered new interface driver usbhid
[ 3.104339] usbhid: USB HID core driver
[ 3.108224] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-4/3-4:1.0/0003:09DA:C10A.0001/input/input2
[ 3.109144] hid-generic 0003:09DA:C10A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:13.1-4/input0
[ 3.612297] Switched to clocksource tsc
[ 4.501865] random: nonblocking pool is initialized
[ 5.185541] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.904706] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 8.707849] lp: driver loaded but no devices found
[ 8.726906] ppdev: user-space parallel port driver
[ 8.862795] fuse init (API version 7.23)
[ 9.189555] systemd-udevd[157]: starting version 215
[ 10.923343] tsc: Marking TSC unstable due to TSC halts in idle
[ 10.923370] ACPI: acpi_idle registered with cpuidle
[ 10.928063] Switched to clocksource acpi_pm
[ 10.948544] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.953460] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 10.956721] ACPI: Lid Switch [LID]
[ 10.956861] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 10.956870] ACPI: Power Button [PWRB]
[ 10.956964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.956968] ACPI: Power Button [PWRF]
[ 11.233457] systemd-journald[141]: Received request to flush runtime journal from PID 1
[ 11.373262] ACPI: AC Adapter [ACAD] (on-line)
[ 11.706393] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.144284] ACPI: Battery Slot [BAT1] (battery present)
[ 12.279757] yenta_cardbus 0000:09:01.0: enabling device (0000 -> 0003)
[ 12.279933] yenta_cardbus 0000:09:01.0: CardBus bridge found [1179:ff31]
[ 12.279966] yenta_cardbus 0000:09:01.0: Using CSCINT to route CSC interrupts to PCI
[ 12.279969] yenta_cardbus 0000:09:01.0: Routing CardBus interrupts to PCI
[ 12.279978] yenta_cardbus 0000:09:01.0: TI: mfunc 0x015c1d22, devctl 0x44
[ 12.456095] snd_atiixp_modem 0000:00:14.6: MC'97 0 converters and GPIO not ready (0x1)
[ 12.512900] yenta_cardbus 0000:09:01.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 12.512911] yenta_cardbus 0000:09:01.0: Socket status: 30000007
[ 12.512922] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 12.512927] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff:
[ 12.513830] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.515854] excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff
[ 12.537294] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xc02fffff]
[ 12.537303] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xc02fffff:
[ 12.537307] excluding 0xc0200000-0xc020ffff
[ 12.537324] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge window: [mem 0x78000000-0x7bffffff pref]
[ 12.537328] pcmcia_socket pcmcia_socket0: cs: memory probe 0x78000000-0x7bffffff:
[ 12.537340] excluding 0x78000000-0x7bffffff
[ 12.584127] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[ 13.056757] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0/0x0, board id: 0, fw id: 53323
[ 13.056773] psmouse serio1: synaptics: Toshiba Satellite L20 detected, limiting rate to 40pps.
[ 13.092831] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 13.131798] [drm] Initialized drm 1.1.0 20060810
[ 13.256582] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 13.258124] excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x280-0x297 0x370-0x377
[ 13.259220] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 13.259804] excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
[ 13.262094] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 13.262731] excluding 0x878-0x87f
[ 13.263019] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 13.263443] excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 13.263897] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 13.263906] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 13.263939] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 13.263960] clean.
[ 13.263980] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 13.263996] excluding 0x60000000-0x60ffffff
[ 13.266172] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 13.267243] clean.
[ 13.840775] [drm] radeon kernel modesetting enabled.
[ 13.841548] [drm] initializing kernel modesetting (RS400 0x1002:0x5A62 0x1179:0xFF31).
[ 13.841582] [drm] register mmio base: 0xC0100000
[ 13.841584] [drm] register mmio size: 65536
[ 13.841832] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.841843] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
[ 13.841848] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.842536] [drm] Detected VRAM RAM=128M, BAR=256M
[ 13.842545] [drm] RAM width 128bits DDR
[ 13.842691] [TTM] Zone kernel: Available graphics memory: 441710 kiB
[ 13.842693] [TTM] Zone highmem: Available graphics memory: 970418 kiB
[ 13.842696] [TTM] Initializing pool allocator
[ 13.842710] [TTM] Initializing DMA pool allocator
[ 13.842763] [drm] radeon: 128M of VRAM memory ready
[ 13.842766] [drm] radeon: 512M of GTT memory ready.
[ 13.842801] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.877237] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 13.884378] [drm] PCIE GART of 512M enabled (table at 0x0000000033A00000).
[ 13.885208] radeon 0000:01:05.0: WB enabled
[ 13.885216] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xf373a000
[ 13.885221] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.885224] [drm] Driver supports precise vblank timestamp query.
[ 13.885227] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 13.885248] [drm] radeon: irq initialized.
[ 13.885268] [drm] Loading R300 Microcode
[ 14.023318] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/R300_cp.bin
[ 14.023672] [drm] radeon: ring at 0x0000000080001000
[ 14.023699] [drm] ring test succeeded in 2 usecs
[ 14.023889] [drm] ib test succeeded in 0 usecs
[ 14.025325] [drm] Panel ID String: SEC
[ 14.025329] [drm] Panel Size 1024x768
[ 14.053326] [drm] radeon legacy LVDS backlight initialized
[ 14.053330] [drm] Radeon Display Connectors
[ 14.053333] [drm] Connector 0:
[ 14.053334] [drm] VGA-1
[ 14.053338] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 14.053340] [drm] Encoders:
[ 14.053342] [drm] CRT1: INTERNAL_DAC2
[ 14.053344] [drm] Connector 1:
[ 14.053346] [drm] LVDS-1
[ 14.053349] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 14.053351] [drm] Encoders:
[ 14.053353] [drm] LCD1: INTERNAL_LVDS
[ 14.053355] [drm] Connector 2:
[ 14.053357] [drm] SVIDEO-1
[ 14.053358] [drm] Encoders:
[ 14.053360] [drm] TV1: INTERNAL_DAC2
[ 14.131640] [drm] fb mappable at 0xD0040000
[ 14.131648] [drm] vram apper at 0xD0000000
[ 14.131650] [drm] size 3145728
[ 14.131652] [drm] fb depth is 24
[ 14.131654] [drm] pitch is 4096
[ 14.132474] fbcon: radeondrmfb (fb0) is primary device
[ 14.182179] Console: switching to colour frame buffer device 128x48
[ 14.187318] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 14.187322] radeon 0000:01:05.0: registered panic notifier
[ 14.195941] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:05.0 on minor 0
[ 14.747013] cfg80211: Calling CRDA to update world regulatory domain
[ 15.034508] usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
[ 15.034990] usbcore: registered new interface driver ath9k_htc
[ 15.463362] Adding 2421756k swap on /dev/sda5. Priority:-1 extents:1 across:2421756k FS
[ 16.081964] usb 1-4: firmware: direct-loading firmware htc_9271.fw
[ 16.244355] cfg80211: World regulatory domain updated:
[ 16.244367] cfg80211: DFS Master region: unset
[ 16.244370] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.244374] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.244378] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.244381] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.244385] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 16.244389] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 16.244392] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 16.244395] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.244398] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 16.366263] usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 16.602907] ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
[ 16.825097] RPC: Registered named UNIX socket transport module.
[ 16.825106] RPC: Registered udp transport module.
[ 16.825109] RPC: Registered tcp transport module.
[ 16.825111] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.846565] ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
[ 16.846573] ath: EEPROM regdomain: 0x809c
[ 16.846576] ath: EEPROM indicates we should expect a country code
[ 16.846579] ath: doing EEPROM country->regdmn map search
[ 16.846581] ath: country maps to regdmn code: 0x52
[ 16.846584] ath: Country alpha2 being used: CN
[ 16.846586] ath: Regpair used: 0x52
[ 16.873669] FS-Cache: Loaded
[ 16.894045] ieee80211 phy0: Atheros AR9271 Rev:1
[ 16.896433] cfg80211: Calling CRDA for country: CN
[ 16.912322] cfg80211: Regulatory domain changed to country: CN
[ 16.912334] cfg80211: DFS Master region: FCC
[ 16.912338] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.912342] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.912347] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 16.912351] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 16.912354] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 16.912357] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 16.912360] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 16.912363] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 16.955463] FS-Cache: Netfs 'nfs' registered for caching
[ 17.132451] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 24.873565] 8139too 0000:09:02.0 eth0: link down
[ 24.873791] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.114095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 321.455036] Bluetooth: Core ver 2.19
[ 321.455086] NET: Registered protocol family 31
[ 321.455088] Bluetooth: HCI device and connection manager initialized
[ 321.455352] Bluetooth: HCI socket layer initialized
[ 321.455358] Bluetooth: L2CAP socket layer initialized
[ 321.455386] Bluetooth: SCO socket layer initialized
[ 321.524616] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 321.524624] Bluetooth: BNEP filters: protocol multicast
[ 321.524643] Bluetooth: BNEP socket layer initialized
[ 350.407320] wlan0: authenticate with 64:70:02:4d:cb:ea
[ 350.717533] wlan0: send auth to 64:70:02:4d:cb:ea (try 1/3)
[ 350.724276] wlan0: authenticated
[ 350.728731] wlan0: associate with 64:70:02:4d:cb:ea (try 1/3)
[ 350.732802] wlan0: RX AssocResp from 64:70:02:4d:cb:ea (capab=0x431 status=0 aid=1)
[ 350.740039] wlan0: associated
[ 350.740104] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 350.740179] cfg80211: Calling CRDA for country: PL
[ 350.882084] cfg80211: Regulatory domain changed to country: PL
[ 350.882132] cfg80211: DFS Master region: ETSI
[ 350.882135] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 350.882139] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 350.882143] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 350.882148] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 350.882151] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 350.882154] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 544.486631] perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000Offline
#21 2015-06-27 13:34:09
Pavlo950 - człowiek pasjonat :D
Re: Blokowanie ekranu.
Blokowanie wyłącz gdzieś w opcjach środowiska. Zerknij [url=https://wiki.archlinux.org/index.php/Display_Power_Management_Signaling]tutaj[/url]. Ale to dalej nie rozwiąże problemu, bo problem jest bezpośredniego ze sterownikiem, w czym ja pomóc już nie mogę.
Offline
#22 2015-06-27 20:52:03
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Nie wiem gdzie dodać ta info czy do pierwszego postu czy kontunuować ale zauważyłem ciekawą rzecz. Jak przeszedłem na środowisko GNOME to powyższy problem nie występuje - tzn po dłuższej bezczynności ekran się wygasza ale w momencie ruchu myszką ekran odrazu odpala.
Ma ktoś pomysł?
Offline
#23 2015-06-27 22:16:14
Pavlo950 - człowiek pasjonat :D
#24 2015-06-27 22:26:47
Przemo82 - Użytkownik
- Przemo82
- Użytkownik
- Zarejestrowany: 2014-06-15
Re: Blokowanie ekranu.
Tak zainstalowałem dwa środowiska (GNOME i KDE). Wolałbym pracować na KDE bo wydaje mi się lżejsze i komp płynniej chodzi niż w GNOME. Ale z KDE mam problemy a z GNOME jest ok.
Offline
#25 2015-06-27 23:05:17
Pavlo950 - człowiek pasjonat :D
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00011 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00099 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.133.138.129' WHERE u.id=1 |
| 0.00065 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.133.138.129', 1732457362) |
| 0.00038 | SELECT * FROM punbb_online WHERE logged<1732457062 |
| 0.00062 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=27510 AND t.moved_to IS NULL |
| 0.00006 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00576 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=27510 ORDER BY p.id LIMIT 0,25 |
| 0.00088 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=27510 |
| Total query time: 0.00949 s | |