Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
- Forum Debian Users Gang
- » Pochodne Debiana: Ubuntu, Mint
- » [Solved]linux mint 17.2 Problem z wifi
#1 2015-08-10 21:09:25
andrzej88 - 
Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
[Solved]linux mint 17.2 Problem z wifi
Cześć.
Może na początku trochę się wytłumaczę, bo chciałbym zapytać o linux mint na forum użytkowników debiana. Ale pamiętam, że kiedyś tu pisałem w sprawie innego systemu i ludzie byli bardzo uprzejmi i pomocni. Dlatego chciałbym prosić dziś o pomoc w sprawie niedziałającego wifi na linux mint 17.2.
Linuxem zajmowałem się 3 lata temu i nie pamiętam za bardzo komend do terminala. Więc z góry przepraszam za tą moją niesprawność. :)
Problem jest tej natury, że nie wykrywa mi sieci Wi-Fi na świeżo zainstalowany linux mint 17.2 na laptopie Compaq
Kod:
andrzej@andrzej-Compaq-Presario-C700-Notebook-PC ~ $ uname -a
Linux andrzej-Compaq-Presario-C700-Notebook-PC 3.16.0-38-generic #52~14.04.1-Ubuntu SMP Fri May 8 09:44:48 UTC 2015 i686 i686 i686 GNU/Linux
andrzej@andrzej-Compaq-Presario-C700-Notebook-PC ~ $ ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:ec:87:1f:fa
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:149 errors:0 dropped:0 overruns:0 frame:0
TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:10687 (10.6 KB) TX bytes:10687 (10.6 KB)Czy ktoś wie co można zrobić, aby wykrywało sieci wifi i był dostęp do internetu?
Pozdrawiam!
SOLVED
Problemem okazuje się sprzętowe wyłączenie wifi. (Przycisk na obudowie nie komunikuje się z linuxem i nie można sprzętowo włączyć karty wifi) Rozwiązanie jest proste: przywrócenie ustawień fabrycznych Biosu[/quote]Ostatnio edytowany przez andrzej88 (2015-08-12 23:36:21)
Offline
#2 2015-08-10 21:48:46
uzytkownikubunt - Zbanowany
- uzytkownikubunt
- Zbanowany
- Zarejestrowany: 2012-04-25
Re: [Solved]linux mint 17.2 Problem z wifi
2130
Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:21:59)
Offline
#3 2015-08-10 22:07:40
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
hej
drugie polecenie zwraca:
Kod:
01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
PS. Sprawdziłem i mogę się połączyć z internetem poprzez kabel.
Offline
#4 2015-08-10 22:10:05
uzytkownikubunt - Zbanowany
- uzytkownikubunt
- Zbanowany
- Zarejestrowany: 2012-04-25
Re: [Solved]linux mint 17.2 Problem z wifi
2131
Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:22:00)
Offline
#5 2015-08-10 22:13:50
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
proszę:
Kod:
andrzej@andrzej-Compaq-Presario-C700-Notebook-PC ~ $ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 04) 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 04) 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 04) 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 04) 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 04) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f4) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 04) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 04) 01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01) 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
Offline
#6 2015-08-10 22:19:14
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [Solved]linux mint 17.2 Problem z wifi
Co to za mint? Jakie tam jest środowisko graficzne? W jaki sposób się łączysz? Network Manager?
Ta karta jest o wielu lat wspierana i sama z siebie powinna działać.
Offline
#7 2015-08-10 22:30:57
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
yossarian.
Jest to linux mint 17.2 32 bit ze środowiskiem cinnamon. Najnowszy stabilny mint. Internet na kablu LAN chodzi, ale manager wifi nie wykrywa żadnych sieci. System jest zaktualizowany poprzez LAN, ale nic to nie zmieniło. Wi-fi nadal nie wykrywa dostępnych sieci. Łączę się, a raczej nie moge sie polączyć poprzez network managera. Wersja cinnamon 2.6.13.
?
Offline
#8 2015-08-11 08:29:32
mati75 - Psuj
#9 2015-08-11 10:06:28
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
mati75. Ok. Tylko nie rozumiem dlaczego mogłoby to pomóc? :)
Ad1. Czy system 64 bitowy jest stabilniejszy niż 32? Dlaczego polecasz tą opcje dla mnie?
Ad2. Faktycznie być może problemem jest środowisko cinnamon. Dlatego, że przycisk do włączenie wifi się sam odklikuje w stan wifi wyłączone. Może trzeba z poziomu terminala jakoś zmusić laptopa do włączenia wifi?
Ad3, Komputer jest bardzo stary, chyba z 10 lat go używał mój brat zanim go oddał mamie. Czy jądro w nowszej wersji niż 3.16.0-38 mogłoby wnieść jakąś nowość do tak starych kart? Myślę, że raczej nic to nie zmieni i boję się trochę, że nowsze jądro niż domyślne systemu pogorszy działanie programów. Więc wolałbym unikać takich ingerencji w system.
Ostatnio edytowany przez andrzej88 (2015-08-11 10:10:05)
Offline
#10 2015-08-11 11:35:26
mati75 - Psuj
Re: [Solved]linux mint 17.2 Problem z wifi
Na razie na 32 bitowym sprawdziłbym:
Kod:
sudo rfkill unblock all
Aktualizacja jądra:
Kod:
sudo apt-get update sudo apt-get install linux-generic-lts-vivid
[img]https://l0calh0st.pl/obrazki/userbar.png[/img]
Offline
#11 2015-08-11 11:47:02
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [Solved]linux mint 17.2 Problem z wifi
Wrzuć gdzieś wynik [tt]dmesg[/tt] i:
Kod:
rfkill list all
To drugie chyba będziesz musiał z sudo.
Offline
#12 2015-08-11 16:10:52
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
Kod:
andrzej@andrzej-Compaq-Presario-C700-Notebook-PC ~ $ rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: nodmesg się nie mieści cały w terminalu:
Kod:
[ 0.119587] ACPI: SSDT 0xF3020000 0005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.140276] ACPI: Dynamic OEM Table Load: [ 0.140284] ACPI: SSDT 0xF37BC300 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.140789] ACPI: Dynamic OEM Table Load: [ 0.140796] ACPI: SSDT 0xF37B56C0 000083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.172027] ACPI : EC: GPE storm detected(10 GPEs), transactions will use polling mode [ 0.272034] ACPI: Interpreter enabled [ 0.272053] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.272059] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.272079] ACPI: (supports S0 S3 S4 S5) [ 0.272082] ACPI: Using IOAPIC for interrupt routing [ 0.272124] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.439951] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.524602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.524612] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.524619] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20140424/nsarguments-189) [ 0.524699] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.524701] _OSC request data:1 1f 0 [ 0.524708] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM [ 0.525677] PCI host bridge to bus 0000:00 [ 0.525682] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.525686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.525689] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.525692] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.525695] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] [ 0.525710] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.525869] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 [ 0.525890] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd10fffff 64bit] [ 0.525902] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.525911] pci 0000:00:02.0: reg 0x20: [io 0x30d0-0x30d7] [ 0.526051] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 [ 0.526068] pci 0000:00:02.1: reg 0x10: [mem 0xd1100000-0xd11fffff 64bit] [ 0.526273] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.526304] pci 0000:00:1b.0: reg 0x10: [mem 0xd2400000-0xd2403fff 64bit] [ 0.526440] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.526573] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.526715] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.526781] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.526865] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.526932] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f] [ 0.527065] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.527131] pci 0000:00:1d.1: reg 0x20: [io 0x3060-0x307f] [ 0.527264] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.527331] pci 0000:00:1d.2: reg 0x20: [io 0x3040-0x305f] [ 0.527480] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.527509] pci 0000:00:1d.7: reg 0x10: [mem 0xd2404800-0xd2404bff] [ 0.527634] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.527757] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.527894] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.527973] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 0.528106] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415] [ 0.528114] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.528122] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003) [ 0.528276] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 0.528297] pci 0000:00:1f.1: reg 0x10: [io 0x30c8-0x30cf] [ 0.528312] pci 0000:00:1f.1: reg 0x14: [io 0x30e4-0x30e7] [ 0.528326] pci 0000:00:1f.1: reg 0x18: [io 0x30c0-0x30c7] [ 0.528340] pci 0000:00:1f.1: reg 0x1c: [io 0x30e0-0x30e3] [ 0.528354] pci 0000:00:1f.1: reg 0x20: [io 0x30a0-0x30af] [ 0.528385] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.528388] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.528391] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.528394] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.528511] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 0.528543] pci 0000:00:1f.2: reg 0x10: [io 0x30b8-0x30bf] [ 0.528558] pci 0000:00:1f.2: reg 0x14: [io 0x30dc-0x30df] [ 0.528572] pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7] [ 0.528587] pci 0000:00:1f.2: reg 0x1c: [io 0x30d8-0x30db] [ 0.528601] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.528616] pci 0000:00:1f.2: reg 0x24: [mem 0xd2404000-0xd24047ff] [ 0.528694] pci 0000:00:1f.2: PME# supported from D3hot [ 0.528818] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.528839] pci 0000:00:1f.3: reg 0x10: [mem 0xd2404c00-0xd2404cff] [ 0.528889] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.529162] pci 0000:01:00.0: [168c:001c] type 00 class 0x020000 [ 0.529203] pci 0000:01:00.0: reg 0x10: [mem 0xd1300000-0xd130ffff 64bit] [ 0.529491] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.529506] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.529513] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.529519] pci 0000:00:1c.0: bridge window [mem 0xd1300000-0xd23fffff] [ 0.529529] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.529614] pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000 [ 0.529643] pci 0000:02:01.0: reg 0x10: [io 0x1000-0x10ff] [ 0.529660] pci 0000:02:01.0: reg 0x14: [mem 0xd1200000-0xd12000ff] [ 0.529776] pci 0000:02:01.0: supports D1 D2 [ 0.529779] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.529918] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.529924] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.529931] pci 0000:00:1e.0: bridge window [mem 0xd1200000-0xd12fffff] [ 0.529940] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.529943] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.529946] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.529949] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.529972] pci_bus 0000:00: on NUMA node 0 [ 0.530066] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.530162] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.530254] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.530346] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.530438] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 0.530530] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) [ 0.530622] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.530713] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.531358] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.531432] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.532162] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.532162] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.532162] vgaarb: loaded [ 0.532162] vgaarb: bridge control possible 0000:00:02.0 [ 0.532162] SCSI subsystem initialized [ 0.532162] libata version 3.00 loaded. [ 0.532162] ACPI: bus type USB registered [ 0.532162] usbcore: registered new interface driver usbfs [ 0.536022] usbcore: registered new interface driver hub [ 0.536030] usbcore: registered new device driver usb [ 0.536109] PCI: Using ACPI for IRQ routing [ 0.548726] PCI: pci_cache_line_size set to 64 bytes [ 0.548799] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.548803] e820: reserve RAM buffer [mem 0xbf4d2000-0xbfffffff] [ 0.548807] e820: reserve RAM buffer [mem 0xbf534000-0xbfffffff] [ 0.548810] e820: reserve RAM buffer [mem 0xbf5bb000-0xbfffffff] [ 0.548813] e820: reserve RAM buffer [mem 0xbf678000-0xbfffffff] [ 0.549015] NetLabel: Initializing [ 0.549018] NetLabel: domain hash size = 128 [ 0.549019] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.549035] NetLabel: unlabeled traffic allowed by default [ 0.549062] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.549062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.549062] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.550170] Switched to clocksource hpet [ 0.561822] AppArmor: AppArmor Filesystem Enabled [ 0.561886] pnp: PnP ACPI init [ 0.561917] ACPI: bus type PNP registered [ 0.640260] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io 0x1000-0x1fff] [ 0.640347] system 00:00: [io 0x0600-0x060f] has been reserved [ 0.640351] system 00:00: [io 0x0610] has been reserved [ 0.640354] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.640358] system 00:00: [io 0x0810-0x0817] has been reserved [ 0.640362] system 00:00: [io 0x0400-0x047f] could not be reserved [ 0.640365] system 00:00: [io 0x0500-0x053f] has been reserved [ 0.640369] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.640374] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.640378] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.640381] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.640385] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.640388] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.640392] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.640396] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.640401] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.640476] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.640587] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.640649] pnp 00:03: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active) [ 0.640753] pnp: PnP ACPI: found 4 devices [ 0.640755] ACPI: bus type PNP unregistered [ 0.640763] PnPBIOS: Disabled by ACPI PNP [ 0.679146] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment [ 0.679153] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.679158] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.679167] pci 0000:00:1c.0: bridge window [mem 0xd1300000-0xd23fffff] [ 0.679173] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.679183] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.679187] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.679195] pci 0000:00:1e.0: bridge window [mem 0xd1200000-0xd12fffff] [ 0.679209] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.679212] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.679215] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.679218] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff] [ 0.679221] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.679224] pci_bus 0000:01: resource 1 [mem 0xd1300000-0xd23fffff] [ 0.679227] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.679230] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.679233] pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd12fffff] [ 0.679236] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.679239] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.679242] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.679245] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfebfffff] [ 0.679287] NET: Registered protocol family 2 [ 0.679565] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.679586] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.679621] TCP: Hash tables configured (established 8192 bind 8192) [ 0.679663] TCP: reno registered [ 0.679666] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.679677] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.679742] NET: Registered protocol family 1 [ 0.679769] pci 0000:00:02.0: Video device with shadowed ROM [ 0.681395] PCI: CLS 0 bytes, default 64 [ 0.681479] Trying to unpack rootfs image as initramfs... [ 1.393897] Freeing initrd memory: 27624K (f49fc000 - f64f6000) [ 1.394106] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 1.394110] Simple Boot Flag at 0x44 set to 0x1 [ 1.394365] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 [ 1.394373] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 [ 1.394479] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.394526] Scanning for low memory corruption every 60 seconds [ 1.394978] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.395013] Initialise system trusted keyring [ 1.395048] audit: initializing netlink subsys (disabled) [ 1.395080] audit: type=2000 audit(1439308916.392:1): initialized [ 1.395524] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.398726] zpool: loaded [ 1.398730] zbud: loaded [ 1.398862] VFS: Disk quotas dquot_6.5.2 [ 1.398930] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.399804] fuse init (API version 7.23) [ 1.399973] msgmni has been set to 1701 [ 1.400096] Key type big_key registered [ 1.400692] Key type asymmetric registered [ 1.400697] Asymmetric key parser 'x509' registered [ 1.400723] bounce: pool size: 64 pages [ 1.400740] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.400811] io scheduler noop registered [ 1.400816] io scheduler deadline registered (default) [ 1.400914] io scheduler cfq registered [ 1.401337] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 1.401500] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.401529] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.401620] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.401622] vesafb: scrolling: redraw [ 1.401625] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.402277] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 3072k [ 1.402472] Console: switching to colour frame buffer device 128x48 [ 1.402502] fb0: VESA VGA frame buffer device [ 1.402558] intel_idle: does not run on family 6 model 15 [ 1.648045] ACPI: AC Adapter [AC] (on-line) [ 1.648189] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.648196] ACPI: Power Button [PWRB] [ 1.648275] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.648296] ACPI: Lid Switch [LID0] [ 1.648367] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.648371] ACPI: Sleep Button [SLPB] [ 1.648457] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.648461] ACPI: Power Button [PWRF] [ 1.648710] Monitor-Mwait will be used to enter C-1 state [ 1.648731] Monitor-Mwait will be used to enter C-2 state [ 1.648752] Monitor-Mwait will be used to enter C-3 state [ 1.648768] tsc: Marking TSC unstable due to TSC halts in idle [ 1.648786] ACPI: acpi_idle registered with cpuidle [ 1.792111] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.792114] ACPI: Thermal Zone [TZ01] (55 C) [ 1.792169] GHES: HEST is not enabled! [ 1.792243] isapnp: Scanning for PnP cards... [ 1.792367] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.794985] Linux agpgart interface v0.103 [ 1.795101] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.795128] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.795396] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.795548] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 1.797908] brd: module loaded [ 1.799057] loop: module loaded [ 1.799320] ata_piix 0000:00:1f.1: version 2.13 [ 1.800510] scsi0 : ata_piix [ 1.800647] scsi1 : ata_piix [ 1.800723] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14 [ 1.800726] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15 [ 1.800884] libphy: Fixed MDIO Bus: probed [ 1.800888] tun: Universal TUN/TAP device driver, 1.6 [ 1.800890] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.800968] PPP generic driver version 2.4.2 [ 1.801036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.801045] ehci-pci: EHCI PCI platform driver [ 1.801296] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.801306] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.801326] ehci-pci 0000:00:1d.7: debug port 1 [ 1.805253] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.805282] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd2404800 [ 1.816036] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.816120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.816124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.816127] usb usb1: Product: EHCI Host Controller [ 1.816130] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd [ 1.816133] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.816336] hub 1-0:1.0: USB hub found [ 1.816351] hub 1-0:1.0: 6 ports detected [ 1.816643] ehci-platform: EHCI generic platform driver [ 1.816668] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.816675] ohci-pci: OHCI PCI platform driver [ 1.816697] ohci-platform: OHCI generic platform driver [ 1.816713] uhci_hcd: USB Universal Host Controller Interface driver [ 1.816948] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.816956] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.816966] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.817005] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080 [ 1.817084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.817087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.817090] usb usb2: Product: UHCI Host Controller [ 1.817093] usb usb2: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.817096] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.817273] hub 2-0:1.0: USB hub found [ 1.817285] hub 2-0:1.0: 2 ports detected [ 1.817645] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.817654] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.817663] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.817703] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060 [ 1.817779] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.817782] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.817785] usb usb3: Product: UHCI Host Controller [ 1.817788] usb usb3: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.817791] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.817958] hub 3-0:1.0: USB hub found [ 1.817969] hub 3-0:1.0: 2 ports detected [ 1.818322] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.818331] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.818340] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.818379] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040 [ 1.818448] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.818452] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.818455] usb usb4: Product: UHCI Host Controller [ 1.818457] usb usb4: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.818460] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.818625] hub 4-0:1.0: USB hub found [ 1.818635] hub 4-0:1.0: 2 ports detected [ 1.818898] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.857960] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.857968] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.858174] mousedev: PS/2 mouse device common for all mice [ 1.859818] rtc_cmos 00:01: RTC can wake from S4 [ 1.860018] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.860056] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.860142] device-mapper: uevent: version 1.0.3 [ 1.860259] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.860301] platform eisa.0: Probing EISA bus 0 [ 1.860306] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.860309] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.860312] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.860315] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.860318] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.860321] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.860323] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.860326] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.860329] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.860332] platform eisa.0: EISA: Detected 0 cards [ 1.860357] cpufreq-nforce2: No nForce2 chipset. [ 1.860371] ledtrig-cpu: registered to indicate activity on CPUs [ 1.860535] TCP: cubic registered [ 1.860754] NET: Registered protocol family 10 [ 1.861072] NET: Registered protocol family 17 [ 1.861090] Key type dns_resolver registered [ 1.861390] Using IPI No-Shortcut mode [ 1.861542] Loading compiled-in X.509 certificates [ 1.866303] Loaded X.509 cert 'Magrathea: Glacier signing key: 4fe12264ad04b41c64ed4480a8934267c4c1f1b8' [ 1.866334] registered taskstats version 1 [ 1.869412] Key type trusted registered [ 1.874761] Key type encrypted registered [ 1.874774] AppArmor: AppArmor sha1 policy hashing enabled [ 1.874779] ima: No TPM chip found, activating TPM-bypass! [ 1.874807] evm: HMAC attrs: 0x1 [ 1.875201] Magic number: 11:496:34 [ 1.875327] rtc_cmos 00:01: setting system clock to 2015-08-11 16:01:57 UTC (1439308917) [ 1.875768] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.875771] EDD information not available. [ 1.875917] PM: Hibernation image not present or could not be loaded. [ 1.886419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.980049] ACPI: Battery Slot [BAT0] (battery absent) [ 1.984399] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 2.016275] ata1.00: configured for MWDMA2 [ 2.103148] isapnp: No Plug & Play device found [ 2.105871] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5 [ 2.125209] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.125213] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.125439] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.125584] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.126224] Freeing unused kernel memory: 892K (c1a10000 - c1aef000) [ 2.126322] Write protecting the kernel text: 6752k [ 2.126471] Write protecting the kernel read-only data: 2900k [ 2.126473] NX-protecting the kernel data: 5536k [ 2.148264] systemd-udevd[107]: starting version 204 [ 2.388118] usb 1-6: new high-speed USB device number 3 using ehci-pci [ 2.430209] wmi: Mapper loaded [ 2.450920] [drm] Initialized drm 1.1.0 20060810 [ 2.455411] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.455448] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.485316] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 2.486556] 8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0x00011000, 00:1e:ec:87:1f:fa, IRQ 16 [ 2.506358] ahci 0000:00:1f.2: version 3.0 [ 2.506654] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 2.506692] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.506723] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 2.506727] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems [ 2.516177] scsi2 : ahci [ 2.516633] scsi3 : ahci [ 2.516823] scsi4 : ahci [ 2.516939] ata3: SATA max UDMA/133 abar m2048@0xd2404000 port 0xd2404100 irq 41 [ 2.516943] ata4: DUMMY [ 2.516945] ata5: DUMMY [ 2.517793] [drm] Memory usable by graphics device = 512M [ 2.517800] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 2.517803] fb: switching to inteldrmfb from VESA VGA [ 2.517850] Console: switching to colour dummy device 80x25 [ 2.517956] [drm] Replacing VGA console driver [ 2.540239] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 2.540258] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.540260] [drm] Driver supports precise vblank timestamp query. [ 2.540367] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.629554] [drm] initialized overlay support [ 2.731532] fbcon: inteldrmfb (fb0) is primary device [ 2.731582] Console: switching to colour frame buffer device 160x50 [ 2.731626] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.731629] i915 0000:00:02.0: registered panic notifier [ 2.752089] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 2.752863] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 2.752915] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 2.809228] acpi device:15: registered as cooling_device2 [ 2.809358] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.809672] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.955229] usb 1-6: New USB device found, idVendor=174f, idProduct=5212 [ 2.955234] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 2.955238] usb 1-6: Product: USB2.0 UVC PC Camera [ 2.955241] usb 1-6: Manufacturer: Syntek [ 2.955243] usb 1-6: SerialNumber: 0001 [ 3.016103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.017147] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3.017152] ata3.00: ATA-8: WDC WD1600BEVS-60VAT0, 12.01A12, max UDMA/100 [ 3.017156] ata3.00: 312581808 sectors, multi 16: LBA48 [ 3.018248] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3.018254] ata3.00: configured for UDMA/100 [ 3.018464] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 1A12 PQ: 0 ANSI: 5 [ 3.018917] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.018942] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.019003] sd 2:0:0:0: [sda] Write Protect is off [ 3.019007] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.019041] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.107577] sda: sda1 sda2 sda3 < sda5 sda6 > [ 3.108422] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.216077] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 3.380767] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b [ 3.380773] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.380776] usb 3-1: Product: USB Receiver [ 3.380779] usb 3-1: Manufacturer: Logitech [ 3.397380] hidraw: raw HID events driver (C) Jiri Kosina [ 3.420851] usbcore: registered new interface driver usbhid [ 3.420855] usbhid: USB HID core driver [ 3.433355] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2 [ 3.492607] input: Logitech Unifying Device. Wireless PID:4017 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input9 [ 3.492811] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4017] on usb-0000:00:1d.1-1:1 [ 3.961671] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input8 [ 3.999965] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 4.207777] random: nonblocking pool is initialized [ 5.106890] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 17.659228] Adding 3133436k swap on /dev/sda6. Priority:-1 extents:1 across:3133436k FS [ 18.063669] systemd-udevd[351]: starting version 204 [ 18.210172] lp: driver loaded but no devices found [ 18.224368] ppdev: user-space parallel port driver [ 18.225839] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 18.531122] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.544494] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMBA) (20140424/utaddress-258) [ 18.544506] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000043b (\_SB_.PCI0.LPC_.PMA1) (20140424/utaddress-258) [ 18.544512] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.544518] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000052d (\GPIO) (20140424/utaddress-258) [ 18.544523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.544576] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 18.594565] cfg80211: Calling CRDA to update world regulatory domain [ 18.773577] device-mapper: multipath: version 1.7.0 loaded [ 18.818129] ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 18.818302] ath5k 0000:01:00.0: registered as 'phy0' [ 18.925900] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 18.960442] sound hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing. [ 18.960890] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker [ 18.960894] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.960898] sound hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 18.960900] sound hdaudioC0D0: mono: mono_out=0x0 [ 18.960903] sound hdaudioC0D0: inputs: [ 18.960906] sound hdaudioC0D0: Internal Mic=0x1d [ 18.960910] sound hdaudioC0D0: Mic=0x18 [ 18.961573] sound hdaudioC0D0: Enable sync_write for stable communication [ 18.964550] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 18.964747] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 19.092297] media: Linux media interface: v0.10 [ 19.168978] Linux video capture interface: v2.00 [ 19.422903] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:5212) [ 19.470890] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 19.494126] usbcore: registered new interface driver uvcvideo [ 19.494131] USB Video Class driver (1.1.1) [ 19.543803] gpio_ich: GPIO from 206 to 255 on gpio_ich [ 19.596582] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 19.963500] ath: EEPROM regdomain: 0x67 [ 19.963505] ath: EEPROM indicates we should expect a direct regpair map [ 19.963509] ath: Country alpha2 being used: 00 [ 19.963510] ath: Regpair used: 0x67 [ 19.980399] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 19.981367] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 20.133073] cfg80211: World regulatory domain updated: [ 20.133079] cfg80211: DFS Master region: unset [ 20.133082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 20.133086] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 20.133089] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 20.133092] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 20.133095] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 20.133098] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 20.208264] init: failsafe main process (563) killed by TERM signal [ 20.896091] Bluetooth: Core ver 2.19 [ 20.896132] NET: Registered protocol family 31 [ 20.896135] Bluetooth: HCI device and connection manager initialized [ 20.896148] Bluetooth: HCI socket layer initialized [ 20.896152] Bluetooth: L2CAP socket layer initialized [ 20.896172] Bluetooth: SCO socket layer initialized [ 20.955331] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.955336] Bluetooth: BNEP filters: protocol multicast [ 20.955348] Bluetooth: BNEP socket layer initialized [ 21.019850] Bluetooth: RFCOMM TTY layer initialized [ 21.019867] Bluetooth: RFCOMM socket layer initialized [ 21.019882] Bluetooth: RFCOMM ver 1.11 [ 21.843329] init: cups main process (694) killed by HUP signal [ 21.843350] init: cups main process ended, respawning [ 25.457974] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.462551] 8139too 0000:02:01.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 25.702291] init: samba-ad-dc main process (912) terminated with status 1 [ 28.161650] init: plymouth-upstart-bridge main process ended, respawning [ 28.172543] init: plymouth-upstart-bridge main process (1199) terminated with status 1 [ 28.172566] init: plymouth-upstart-bridge main process ended, respawning [ 31.135423] init: plymouth-stop pre-start process (1466) terminated with status 1
Offline
#13 2015-08-11 17:51:21
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
uruchomilem live CD z Mintem 17.2 64bit wersja z mate. Tam jest komunikat w trayu "Wi-Fi is disabled by hardware switch".
Lampka przy przycisku na wifi swieci na niebiesko i powinno wszystko dzialac tak jak jest. Nie da sie nic przyciskiem do wifi zrobic. Co teraz?
rfkill zwraca na tamtym obrazie
Kod:
mint ~ # rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yesrfkill unblock all nic nie zmienia akurat na obrazie iso, bo nadal hard blocked jest ustawiony na yes.
A wiec sytuacja na linux mint w wersji 64bit z matem troche zmienia sie w stosunku do linux cinnamon 32 bit, ale laptop nie wykrywa sieci w obu przypadkach. :/
Ostatnio edytowany przez andrzej88 (2015-08-11 18:11:35)
Offline
#14 2015-08-11 21:33:33
mati75 - Psuj
#15 2015-08-12 19:52:25
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
hej
Cinnamon 32 bit (zainstalowany)
Kod:
andrzej@andrzej-Compaq-Presario-C700-Notebook-PC ~ $ lspci -v
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at d1000000 (64-bit, non-prefetchable) [size=1M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 30d0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, fast devsel, latency 0
Memory at d1100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04)
Subsystem: Conexant Systems, Inc. Presario C700
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d1300000-d23fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at d2404800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d1200000-d12fffff
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 04)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at 30a0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 41
I/O ports at 30b8 [size=8]
I/O ports at 30dc [size=4]
I/O ports at 30b0 [size=8]
I/O ports at 30d8 [size=4]
I/O ports at 3020 [size=32]
Memory at d2404000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04)
Subsystem: Hewlett-Packard Company Presario C700
Flags: medium devsel, IRQ 11
Memory at d2404c00 (32-bit, non-prefetchable) [size=256]
I/O ports at 3000 [size=32]
01:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Hewlett-Packard Company Device 137b
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d1300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at 1000 [size=256]
Memory at d1200000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139toomate 64 bit (niezainstalowany)
Kod:
mint@mint ~ $ lspci -v
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at d1000000 (64-bit, non-prefetchable) [size=1M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 30d0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, fast devsel, latency 0
Memory at d1100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04)
Subsystem: Conexant Systems, Inc. Presario C700
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d1300000-d23fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at d2404800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d1200000-d12fffff
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 04)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at 30a0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 41
I/O ports at 30b8 [size=8]
I/O ports at 30dc [size=4]
I/O ports at 30b0 [size=8]
I/O ports at 30d8 [size=4]
I/O ports at 3020 [size=32]
Memory at d2404000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04)
Subsystem: Hewlett-Packard Company Presario C700
Flags: medium devsel, IRQ 11
Memory at d2404c00 (32-bit, non-prefetchable) [size=256]
I/O ports at 3000 [size=32]
01:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Hewlett-Packard Company Device 137b
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d1300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at 1000 [size=256]
Memory at d1200000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139tooOstatnio edytowany przez andrzej88 (2015-08-12 19:58:05)
Offline
#16 2015-08-12 20:24:44
uzytkownikubunt - Zbanowany
- uzytkownikubunt
- Zbanowany
- Zarejestrowany: 2012-04-25
Re: [Solved]linux mint 17.2 Problem z wifi
2136
Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:22:07)
Offline
#17 2015-08-12 20:28:11
mati75 - Psuj
#18 2015-08-12 20:52:42
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
Kod:
andrzej@andrzej-Compaq-Presario-C700-Notebook-PC ~ $ su
Hasło:
andrzej-Compaq-Presario-C700-Notebook-PC andrzej # lspci -v | grep Atheros -A16
01:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Hewlett-Packard Company Device 137b
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d1300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Count=1 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Kernel driver in use: ath5k
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
Subsystem: Hewlett-Packard Company Presario C700
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at 1000 [size=256]
Memory at d1200000 (32-bit, non-prefetchable) [size=256]
andrzej-Compaq-Presario-C700-Notebook-PC andrzej # sudo -s
andrzej-Compaq-Presario-C700-Notebook-PC andrzej # echo "options ath5k nowhcrypt=1" > /etc/modprobe.d/ath5k.conf
andrzej-Compaq-Presario-C700-Notebook-PC andrzej # ls /etc/modprobe.d
alsa-base.conf blacklist-framebuffer.conf dkms.conf
ath5k.conf blacklist-modem.conf fbdev-blacklist.conf
blacklist-ath_pci.conf blacklist-oss.conf iwlwifi.conf
blacklist.conf blacklist-rare-network.conf mlx4.conf
blacklist-firewire.conf blacklist-watchdog.conf vmwgfx-fbdev.conf
andrzej-Compaq-Presario-C700-Notebook-PC andrzej #Nie zadziałało
Wydaje się, że stworzyłem nowy plik ath5k.conf Jest w nim tylko jedna linijka "options ath5k nowhcrypt=1". Nie wiem, czy dokładnie o to chodziło, czy raczej o modyfikację któregos z plików .conf dlatego pod koniec podaje wyniki polecenia "ls" dla folderu etc/modprobe.d
Cos nowego:
"rfkill list all" pokazuje, na zaintalowanym cinnamonie hard blocdked: yes
Kod:
andrzej-Compaq-Presario-C700-Notebook-PC andrzej # rfkill unblock all
andrzej-Compaq-Presario-C700-Notebook-PC andrzej # rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yesOstatnio edytowany przez andrzej88 (2015-08-12 21:26:16)
Offline
#19 2015-08-12 22:19:19
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [Solved]linux mint 17.2 Problem z wifi
Musisz włączyć kartę przełącznikiem sprzętowym.
Jakby się nie udawało, to spróbuj przywrócić ustawienia domyślne w Biosie.
W ostateczności będziesz musiał ją włączyć spod Windowsa.
Offline
#20 2015-08-12 23:30:38
andrzej88 - Użytkownik
- andrzej88
- Użytkownik
- Zarejestrowany: 2012-07-01
Re: [Solved]linux mint 17.2 Problem z wifi
Cześć!
Nic się nie udawało, bo przełącznik sieciowy nie działał na linuxie. W windowsie domyślnie karta wifi byłą wyłączona, ale po kliknięciu specjalnego przycisku na obudowie można było internet uruchomić. Lampka z pomarańczowej zaczynała świecić sie na niebiesko i było ok. Ale po powrocie na linuxa internet nadal był wyłączony mimo świecącej na niebiesko diody.
Przywrócenie domyślnych ustawień systemowych biosu odziwo pomogło. Teraz wifi jest uruchomione. Lampka świeci raz niebieskim raz pomaranczowym światłem, ale działa. hehe. Nie znalazłem w biosie zadnych opcji z wifi, ale co tam. Samo przywrócenie ustawień fabrycznych pomogło. Very dziwne koledzy. Very dziwne, ale sposób zadziałał :)
Dziękuje bardzo!
Offline
Strony: 1
- Forum Debian Users Gang
- » Pochodne Debiana: Ubuntu, Mint
- » [Solved]linux mint 17.2 Problem z wifi
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00011 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00135 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.188.13.127' WHERE u.id=1 |
| 0.00209 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.188.13.127', 1732760519) |
| 0.00058 | SELECT * FROM punbb_online WHERE logged<1732760219 |
| 0.00034 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=27633 AND t.moved_to IS NULL |
| 0.00028 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00331 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=27633 ORDER BY p.id LIMIT 0,25 |
| 0.00073 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=27633 |
| Total query time: 0.00883 s | |