Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2015-11-19 13:45:32
patria - Użytkownik
- patria
- Użytkownik
- Zarejestrowany: 2013-05-28
Dekoder DVB-T Omega t900 nie zawsze "widoczny"
Witam
Mam problem z odtworzeniem telewizji DVB-T po odłaczeniu komputera od napięcia. Po ponownym uruchomieniu Debiana 8.1 Kaffeine nie wykrywa dekodera. Polecenie lsusb wygląda tak:
Kod:
lsusb: Bus 002 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 19d2:0031 ZTE WCDMA Technologies MSM MF110/MF627/MF636 Bus 001 Device 006: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 09da:000e A4 Tech Co., Ltd X-F710F Optical Mouse 3xFire Gaming Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Jedynym sposobem na uruchomienia dekodera na Linuxie jest uruchomienie Windowsa, uruchomienie dekodera na WMP i następnie restart, ponownie uruchomić komputer na Debianie. Wtedy dekoder jest już wykrywany.
Moja płyta głowna to Asus P5k, dekoder podany w tytule.
Offline
#2 2015-11-19 15:09:44
Pavlo950 - 
człowiek pasjonat :D
#3 2015-11-19 16:56:43
neo86 - Lubię marudzić
- neo86
- Lubię marudzić
- Skąd: California
- Zarejestrowany: 2014-06-29
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
[quote=patria]Witam
Mam problem z odtworzeniem telewizji DVB-T po odłaczeniu komputera od napięcia. Po ponownym uruchomieniu Debiana 8.1 Kaffeine nie wykrywa dekodera. Polecenie lsusb wygląda tak:
Kod:
lsusb: Bus 001 Device 006: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick
[/quote]
Mam na takim samym chipie tuner DVB i działa poprawnie. Musisz dodać firmware z listy: http://www.linuxtv.org/wiki/index.php/DVB-T_USB_Devices bo w przypadku tego tunera na takim chipie "Zolid Mini DVB-T Stick" (z zewnątrz obudowa tunera wygląda różnie) działał on z marszu na kernelu 3.2.x a na nowszych jest już kłopot i ręcznie musisz dać firmware do /lib/firmware i będzie pięknie działać właśnie w Kaffeine. Pod VLC, MeTV był wykrywany ale nie wykrywał mi w ogóle kanałów TV i radiowych.
Ostatnio edytowany przez neo86 (2015-11-19 17:09:02)
Offline
#4 2015-11-19 17:39:28
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
@patria
Pokaż nam wynik polecenia
Kod:
dmesg
Najlepiej raz jak działa tuner.
Drugi raz jak nie działa.
Porównamy co o nim system nam powie.
[quote=neo86]Pod VLC, MeTV był wykrywany ale nie wykrywał mi w ogóle kanałów TV i radiowych.[/quote]
Jakbyś potrafił się tymi programami posługiwać to i w nich by wszystko działało.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#5 2015-11-19 20:26:08
patria - Użytkownik
- patria
- Użytkownik
- Zarejestrowany: 2013-05-28
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
dmesg przy działającym tunerze:
Kod:
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: System manufacturer P5K/P5K, BIOS 1201 10/14/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] BRK [0x01799000, 0x0179afff] PGTABLE
[ 0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362a4000-0x37149fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FBCD0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0xCFF80000 00003C (v01 A_M_I_ OEMRSDT 10000814 MSFT 00000097)
[ 0.000000] ACPI: FACP 0xCFF80200 000084 (v02 A_M_I_ OEMFACP 10000814 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0xCFF80440 0090AA (v01 A0751 A0751077 00000077 INTL 20060113)
[ 0.000000] ACPI: FACS 0xCFF8E000 000040
[ 0.000000] ACPI: APIC 0xCFF80390 00006C (v01 A_M_I_ OEMAPIC 10000814 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0xCFF80400 00003C (v01 A_M_I_ OEMMCFG 10000814 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0xCFF8E040 000081 (v01 A_M_I_ AMI_OEM 10000814 MSFT 00000097)
[ 0.000000] ACPI: HPET 0xCFF894F0 000038 (v01 A_M_I_ OEMHPET 10000814 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0xCFF89530 0000B0 (v01 A_M_I_ OEMOSFR 10000814 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3978MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x2fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcff7ffff]
[ 0.000000] node 0: [mem 0x00000000-0x2fffffff]
[ 0.000000] On node 0 totalpages: 1048350
[ 0.000000] free_area_init_node: node 0, pgdat c1658ec0, node_mem_map f3ca4020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7957 pages used for memmap
[ 0.000000] HighMem zone: 821634 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75b4000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1046578
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=8e593d33-3055-4d60-9c09-df554c17fc67 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:00130000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 4130536K/4193400K available (4599K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 62864K reserved, 3286536K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc166d000 - 0xc1711000 ( 656 kB)
.data : 0xc147e340 - 0xc166b880 (1973 kB)
.text : 0xc1000000 - 0xc147e340 (4600 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3806000 soft=f3808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2671.632 MHz processor
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5343.26 BogoMIPS (lpj=10686528)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004022] ACPI: Core revision 20140424
[ 0.012714] ACPI: All ACPI Tables successfully acquired
[ 0.016027] Security Framework initialized
[ 0.016043] AppArmor: AppArmor disabled by boot time parameter
[ 0.016044] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.016061] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.016063] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.016308] Initializing cgroup subsys memory
[ 0.016313] Initializing cgroup subsys devices
[ 0.016320] Initializing cgroup subsys freezer
[ 0.016323] Initializing cgroup subsys net_cls
[ 0.016329] Initializing cgroup subsys blkio
[ 0.016333] Initializing cgroup subsys perf_event
[ 0.016335] Initializing cgroup subsys net_prio
[ 0.016359] CPU: Physical Processor ID: 0
[ 0.016360] CPU: Processor Core ID: 0
[ 0.016366] mce: CPU supports 6 MCE banks
[ 0.016374] CPU0: Thermal monitoring enabled (TM2)
[ 0.016376] process: using mwait in idle threads
[ 0.016384] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.016511] Freeing SMP alternatives memory: 20K (c1711000 - c1716000)
[ 0.017339] ftrace: allocating 20756 entries in 41 pages
[ 0.024050] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028140] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067823] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz (fam: 06, model: 17, stepping: 06)
[ 0.068000] APIC calibration not consistent with PM-Timer: 155ms instead of 100ms
[ 0.068000] APIC delta adjusted to PM-Timer: 2087189 (3255973)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] CPU 1 irqstacks, hard=f3946000 soft=f3948000
[ 0.068000] x86: Booting SMP configuration:
[ 0.068000] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.079040] x86: Booted up 1 node, 2 CPUs
[ 0.079044] smpboot: Total of 2 processors activated (10686.52 BogoMIPS)
[ 0.079135] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080107] devtmpfs: initialized
[ 0.080258] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
[ 0.080387] pinctrl core: initialized pinctrl subsystem
[ 0.080463] NET: Registered protocol family 16
[ 0.080572] cpuidle: using governor ladder
[ 0.080574] cpuidle: using governor menu
[ 0.080621] ACPI: bus type PCI registered
[ 0.080624] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.080702] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.080705] PCI: not using MMCONFIG
[ 0.080820] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.080870] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.080871] PCI: Using configuration type 1 for base access
[ 0.092077] ACPI: Added _OSI(Module Device)
[ 0.092077] ACPI: Added _OSI(Processor Device)
[ 0.092077] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092077] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.097167] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.101909] ACPI: Dynamic OEM Table Load:
[ 0.101915] ACPI: SSDT 0xF3A06A00 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.102313] ACPI: Dynamic OEM Table Load:
[ 0.102317] ACPI: SSDT 0xF3A06800 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.102689] ACPI: Interpreter enabled
[ 0.102706] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.102718] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.102720] ACPI: Using IOAPIC for interrupt routing
[ 0.102739] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.103205] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.103207] PCI: Using MMCONFIG for extended config space
[ 0.103221] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.109464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.109469] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.109473] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.109724] PCI host bridge to bus 0000:00
[ 0.109727] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.109729] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.109731] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.109733] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.109734] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.109736] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.109745] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.109838] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.109872] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.109911] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.109975] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.110012] pci 0000:00:1a.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.110092] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.110139] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.110174] pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.110253] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.110300] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.110336] pci 0000:00:1a.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.110416] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.110469] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.110487] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.110564] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.110607] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.110658] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.110673] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[ 0.110734] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.110814] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.110877] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.110919] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.110968] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.111031] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.111073] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.111118] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.111181] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.111224] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.111271] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.111307] pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f]
[ 0.111386] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.111433] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.111469] pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f]
[ 0.111547] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.111595] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.111630] pci 0000:00:1d.2: reg 0x20: [io 0xb480-0xb49f]
[ 0.111709] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.111763] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.111781] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff]
[ 0.111858] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.111901] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.111946] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.112027] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.112076] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.112144] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.112148] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.112151] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.112252] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[ 0.112265] pci 0000:00:1f.2: reg 0x10: [io 0xa000-0xa007]
[ 0.112272] pci 0000:00:1f.2: reg 0x14: [io 0x9c00-0x9c03]
[ 0.112278] pci 0000:00:1f.2: reg 0x18: [io 0x9880-0x9887]
[ 0.112285] pci 0000:00:1f.2: reg 0x1c: [io 0x9800-0x9803]
[ 0.112291] pci 0000:00:1f.2: reg 0x20: [io 0x9480-0x948f]
[ 0.112298] pci 0000:00:1f.2: reg 0x24: [io 0x9400-0x940f]
[ 0.112394] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.112407] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[ 0.112424] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.112509] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.112522] pci 0000:00:1f.5: reg 0x10: [io 0xb000-0xb007]
[ 0.112528] pci 0000:00:1f.5: reg 0x14: [io 0xac00-0xac03]
[ 0.112535] pci 0000:00:1f.5: reg 0x18: [io 0xa880-0xa887]
[ 0.112542] pci 0000:00:1f.5: reg 0x1c: [io 0xa800-0xa803]
[ 0.112548] pci 0000:00:1f.5: reg 0x20: [io 0xa480-0xa48f]
[ 0.112555] pci 0000:00:1f.5: reg 0x24: [io 0xa400-0xa40f]
[ 0.112694] pci 0000:01:00.0: [1002:9490] type 00 class 0x030000
[ 0.112708] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.112717] pci 0000:01:00.0: reg 0x18: [mem 0xfe8e0000-0xfe8effff 64bit]
[ 0.112723] pci 0000:01:00.0: reg 0x20: [io 0xc000-0xc0ff]
[ 0.112734] pci 0000:01:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref]
[ 0.112762] pci 0000:01:00.0: supports D1 D2
[ 0.112811] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[ 0.112824] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[ 0.112874] pci 0000:01:00.1: supports D1 D2
[ 0.112931] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.112934] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.112936] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.112940] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.112991] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.112998] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.113080] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.113163] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[ 0.113176] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[ 0.113227] pci 0000:03:00.0: PME# supported from D3hot
[ 0.113301] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.113320] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.113330] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883]
[ 0.113339] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807]
[ 0.113348] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483]
[ 0.113358] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f]
[ 0.113465] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.113474] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.113477] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.113480] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.113551] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[ 0.113574] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[ 0.113621] pci 0000:02:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
[ 0.113674] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.113729] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.113737] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.113742] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.113792] pci 0000:05:02.0: [1102:0004] type 00 class 0x040100
[ 0.113807] pci 0000:05:02.0: reg 0x10: [io 0xe880-0xe89f]
[ 0.113870] pci 0000:05:02.0: supports D1 D2
[ 0.113914] pci 0000:05:02.1: [1102:7003] type 00 class 0x098000
[ 0.113928] pci 0000:05:02.1: reg 0x10: [io 0xec00-0xec07]
[ 0.113991] pci 0000:05:02.1: supports D1 D2
[ 0.114037] pci 0000:05:02.2: [1102:4001] type 00 class 0x0c0010
[ 0.114053] pci 0000:05:02.2: reg 0x10: [mem 0xfebff800-0xfebfffff]
[ 0.114062] pci 0000:05:02.2: reg 0x14: [mem 0xfebf8000-0xfebfbfff]
[ 0.114122] pci 0000:05:02.2: supports D1 D2
[ 0.114123] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.114183] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.114199] pci 0000:05:03.0: reg 0x10: [mem 0xfebff000-0xfebff7ff]
[ 0.114208] pci 0000:05:03.0: reg 0x14: [io 0xe800-0xe87f]
[ 0.114268] pci 0000:05:03.0: supports D2
[ 0.114270] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[ 0.114345] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.114348] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.114351] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.114356] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.114358] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.114360] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.114362] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.114363] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.114387] pci_bus 0000:00: on NUMA node 0
[ 0.114932] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.114986] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.115037] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.115089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.115140] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.115192] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.115244] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.115295] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.115350] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.115421] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.115421] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115421] vgaarb: loaded
[ 0.115421] vgaarb: bridge control possible 0000:01:00.0
[ 0.115421] PCI: Using ACPI for IRQ routing
[ 0.115421] PCI: pci_cache_line_size set to 64 bytes
[ 0.115421] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.115421] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[ 0.115421] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.115421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.115421] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.117010] Switched to clocksource hpet
[ 0.122384] pnp: PnP ACPI init
[ 0.122397] ACPI: bus type PNP registered
[ 0.122462] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.122466] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.122527] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.122690] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.122693] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122860] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.122863] system 00:03: [io 0x0800-0x087f] could not be reserved
[ 0.122865] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.122867] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.122870] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.122872] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.122874] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.122876] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.122878] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved
[ 0.122881] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.122883] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123108] pnp 00:04: [dma 0 disabled]
[ 0.123173] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.123255] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.123258] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.123260] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123320] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.123389] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.123392] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123576] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.123578] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.123581] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.123583] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.123585] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.123698] pnp: PnP ACPI: found 9 devices
[ 0.123700] ACPI: bus type PNP unregistered
[ 0.123704] PnPBIOS: Disabled by ACPI PNP
[ 0.160327] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.160331] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[ 0.160338] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.160345] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.160347] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.160357] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.160361] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.160363] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.160365] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.160367] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.160369] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.160375] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.160380] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.160385] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.160388] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.160391] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.160393] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.160396] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.160399] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.160401] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.160405] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.160407] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.160411] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.160414] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.160419] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.160422] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.160425] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.160429] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.160433] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.160436] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.160440] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.160443] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.160448] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.160450] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.160454] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.160461] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.160463] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.160465] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.160466] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.160468] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.160470] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.160472] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.160474] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.160476] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.160478] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.160480] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.160482] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.160484] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.160486] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.160487] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.160489] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.160491] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.160493] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.160495] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.160497] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.160498] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.160500] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.160502] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.160504] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.160541] NET: Registered protocol family 2
[ 0.160743] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.160759] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.160785] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.160804] TCP: reno registered
[ 0.160806] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.160814] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.160867] NET: Registered protocol family 1
[ 0.161777] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.161794] PCI: CLS 32 bytes, default 64
[ 0.161837] Unpacking initramfs...
[ 0.442576] Freeing initrd memory: 15000K (f62a4000 - f714a000)
[ 0.442835] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[ 0.442844] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[ 0.442932] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.443241] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.443315] audit: initializing netlink subsys (disabled)
[ 0.443341] audit: type=2000 audit(1447959774.440:1): initialized
[ 0.443645] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.443661] zbud: loaded
[ 0.443745] VFS: Disk quotas dquot_6.5.2
[ 0.443762] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.443828] msgmni has been set to 1677
[ 0.444155] alg: No test for stdrng (krng)
[ 0.444176] bounce: pool size: 64 pages
[ 0.444189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.444233] io scheduler noop registered
[ 0.444235] io scheduler deadline registered
[ 0.444266] io scheduler cfq registered (default)
[ 0.444479] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.444531] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.444597] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.444718] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.444776] pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.444841] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.444934] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.444953] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.444973] intel_idle: does not run on family 6 model 23
[ 0.445027] GHES: HEST is not enabled!
[ 0.445046] isapnp: Scanning for PnP cards...
[ 0.797770] isapnp: No Plug & Play device found
[ 0.797843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.818191] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.818607] Linux agpgart interface v0.103
[ 0.818891] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.818892] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.819416] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.819522] mousedev: PS/2 mouse device common for all mice
[ 0.819578] rtc_cmos 00:01: RTC can wake from S4
[ 0.819692] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.819715] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.819731] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.820262] TCP: cubic registered
[ 0.820288] NET: Registered protocol family 10
[ 0.820513] mip6: Mobile IPv6
[ 0.820517] NET: Registered protocol family 17
[ 0.820521] mpls_gso: MPLS GSO support
[ 0.820663] Using IPI No-Shortcut mode
[ 0.820776] registered taskstats version 1
[ 0.821208] rtc_cmos 00:01: setting system clock to 2015-11-19 19:02:55 UTC (1447959775)
[ 0.821260] PM: Hibernation image not present or could not be loaded.
[ 0.821621] Freeing unused kernel memory: 656K (c166d000 - c1711000)
[ 0.821653] Write protecting the kernel text: 4604k
[ 0.821690] Write protecting the kernel read-only data: 1452k
[ 0.821691] NX-protecting the kernel data: 3588k
[ 0.830107] systemd-udevd[60]: starting version 215
[ 0.830410] random: systemd-udevd urandom read with 0 bits of entropy available
[ 0.839043] ACPI: bus type USB registered
[ 0.839073] usbcore: registered new interface driver usbfs
[ 0.839085] usbcore: registered new interface driver hub
[ 0.839973] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.842781] atl1 0000:02:00.0: version 2.1.3
[ 0.844069] usbcore: registered new device driver usb
[ 0.844548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.844826] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.844930] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.844937] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.844944] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.844976] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.845216] ehci-pci: EHCI PCI platform driver
[ 0.846043] SCSI subsystem initialized
[ 0.847436] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.847439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.847441] usb usb1: Product: UHCI Host Controller
[ 0.847442] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.847444] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.847571] hub 1-0:1.0: USB hub found
[ 0.847578] hub 1-0:1.0: 2 ports detected
[ 0.848099] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.848105] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 0.848116] ehci-pci 0000:00:1a.7: debug port 1
[ 0.852015] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.852100] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 0.852225] libata version 3.00 loaded.
[ 0.852876] ahci 0000:03:00.0: version 3.0
[ 0.864017] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.864061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.864063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.864065] usb usb2: Product: EHCI Host Controller
[ 0.864067] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 0.864069] usb usb2: SerialNumber: 0000:00:1a.7
[ 0.864185] hub 2-0:1.0: USB hub found
[ 0.864192] hub 2-0:1.0: 6 ports detected
[ 0.868047] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.868050] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.868413] scsi0 : ahci
[ 0.868503] scsi1 : ahci
[ 0.868561] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 0.868565] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 0.868602] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.872043] scsi2 : pata_jmicron
[ 0.872122] scsi3 : pata_jmicron
[ 0.872173] ata3: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 0.872174] ata4: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 0.888053] hub 1-0:1.0: USB hub found
[ 0.888060] hub 1-0:1.0: 2 ports detected
[ 0.888209] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.888215] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.888225] ehci-pci 0000:00:1d.7: debug port 1
[ 0.892113] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.892129] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 0.904012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.904054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.904056] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.904058] usb usb3: Product: EHCI Host Controller
[ 0.904060] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 0.904061] usb usb3: SerialNumber: 0000:00:1d.7
[ 0.904172] hub 3-0:1.0: USB hub found
[ 0.904177] hub 3-0:1.0: 6 ports detected
[ 0.904399] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.904404] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.904409] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.904434] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.904477] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.904479] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.904481] usb usb4: Product: UHCI Host Controller
[ 0.904483] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.904484] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.904593] hub 4-0:1.0: USB hub found
[ 0.904600] hub 4-0:1.0: 2 ports detected
[ 0.904760] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.904765] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.904770] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.904786] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.904828] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.904830] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.904832] usb usb5: Product: UHCI Host Controller
[ 0.904834] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.904836] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.904944] hub 5-0:1.0: USB hub found
[ 0.904951] hub 5-0:1.0: 2 ports detected
[ 0.905108] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.905114] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.905119] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.905135] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.905177] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.905179] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.905180] usb usb6: Product: UHCI Host Controller
[ 0.905182] usb usb6: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.905184] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.905288] hub 6-0:1.0: USB hub found
[ 0.905295] hub 6-0:1.0: 2 ports detected
[ 0.905450] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.905456] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.905461] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.905477] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.905522] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.905524] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.905526] usb usb7: Product: UHCI Host Controller
[ 0.905528] usb usb7: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.905529] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.905640] hub 7-0:1.0: USB hub found
[ 0.905646] hub 7-0:1.0: 2 ports detected
[ 0.905802] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.905807] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.905812] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.905828] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.905872] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.905874] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.905876] usb usb8: Product: UHCI Host Controller
[ 0.905877] usb usb8: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.905879] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.905985] hub 8-0:1.0: USB hub found
[ 0.905992] hub 8-0:1.0: 2 ports detected
[ 0.907676] ata_piix 0000:00:1f.2: version 2.13
[ 0.907740] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.909260] scsi4 : ata_piix
[ 0.909340] scsi5 : ata_piix
[ 0.909394] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 0.909397] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 0.909466] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.910720] scsi6 : ata_piix
[ 0.910799] scsi7 : ata_piix
[ 0.910853] ata7: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 0.910855] ata8: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 0.920094] firewire_ohci 0000:05:02.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.984038] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x11
[ 1.056985] ata3.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
[ 1.056989] ata3.01: 488397168 sectors, multi 0: LBA48
[ 1.064663] ata3.01: configured for UDMA/100
[ 1.176023] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.188029] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.192035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.192155] scsi 2:0:1:0: Direct-Access ATA WDC WD2500JB-00R 0K20 PQ: 0 ANSI: 5
[ 1.310144] usb 2-1: New USB device found, idVendor=048d, idProduct=9135
[ 1.310147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.384052] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.384056] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.384152] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.392119] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LM00, max UDMA/133
[ 1.392361] ata8.00: ATA-9: WDC WD10EZEX-08Y20A0, 02.01A02, max UDMA/100
[ 1.392363] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.400252] ata8.00: configured for UDMA/100
[ 1.408232] ata6.00: configured for UDMA/133
[ 1.410087] ata5.00: ATA-8: KINGSTON SH103S3120G, 521ABBF0, max UDMA/133
[ 1.410090] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.420021] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 1.420084] firewire_core 0000:05:02.2: created device fw0: GUID 00023c00300550f7, S400
[ 1.440014] tsc: Refined TSC clocksource calibration: 2671.603 MHz
[ 1.441926] ata5.00: configured for UDMA/133
[ 1.442013] scsi 4:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[ 1.443187] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LM00 PQ: 0 ANSI: 5
[ 1.443205] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.443243] sd 2:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.443283] sd 2:0:1:0: [sda] Write Protect is off
[ 1.443286] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.443318] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.443398] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.443401] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.443419] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.444427] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 >
[ 1.444927] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.448470] sda: sda1
[ 1.448773] sd 2:0:1:0: [sda] Attached SCSI disk
[ 1.458896] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.458899] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.459040] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.459533] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 1.459569] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.459603] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 1.484125] firewire_core 0000:05:03.0: created device fw1: GUID 001e8c0000117773, S400
[ 1.553892] usb 2-4: New USB device found, idVendor=19d2, idProduct=0031
[ 1.553896] usb 2-4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 1.553899] usb 2-4: Product: ZTE WCDMA Technologies MSM
[ 1.553901] usb 2-4: Manufacturer: ZTE,Incorporated
[ 1.553903] usb 2-4: SerialNumber: MF6310ZTED010000
[ 1.557400] usb-storage 2-4:1.2: USB Mass Storage device detected
[ 1.557512] scsi8 : usb-storage 2-4:1.2
[ 1.557603] usbcore: registered new interface driver usb-storage
[ 1.724024] usb 3-4: new high-speed USB device number 2 using ehci-pci
[ 1.904299] usb 3-4: New USB device found, idVendor=0424, idProduct=2228
[ 1.904303] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.904305] usb 3-4: Product: Flash Card Reader
[ 1.904307] usb 3-4: Manufacturer: Generic
[ 1.904309] usb 3-4: SerialNumber: 000022272228
[ 1.904595] usb-storage 3-4:1.0: USB Mass Storage device detected
[ 1.904664] scsi9 : usb-storage 3-4:1.0
[ 2.144021] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[ 2.317820] usb 5-2: New USB device found, idVendor=09da, idProduct=000e
[ 2.317823] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.317826] usb 5-2: Product: PS/2+USB Mouse
[ 2.317828] usb 5-2: Manufacturer: A4Tech
[ 2.331709] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.346188] usbcore: registered new interface driver usbhid
[ 2.346189] usbhid: USB HID core driver
[ 2.346909] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:09DA:000E.0001/input/input1
[ 2.347029] hid-generic 0003:09DA:000E.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.2-2/input0
[ 2.440048] Switched to clocksource tsc
[ 2.556911] scsi 8:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
[ 2.557156] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 2.558772] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 2.913940] scsi 9:0:0:0: Direct-Access Generic Flash HS-CF 3.95 PQ: 0 ANSI: 0
[ 2.917562] scsi 9:0:0:1: Direct-Access Generic Flash HS-MS 3.95 PQ: 0 ANSI: 0
[ 2.921189] scsi 9:0:0:2: Direct-Access Generic Flash HS-SM 3.95 PQ: 0 ANSI: 0
[ 2.924813] scsi 9:0:0:3: Direct-Access Generic Flash HS-SD/MMC 3.95 PQ: 0 ANSI: 0
[ 2.925033] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 2.925201] sd 9:0:0:1: Attached scsi generic sg5 type 0
[ 2.925381] sd 9:0:0:2: Attached scsi generic sg6 type 0
[ 2.925663] sd 9:0:0:3: Attached scsi generic sg7 type 0
[ 3.212425] sd 9:0:0:1: [sde] Attached SCSI removable disk
[ 3.217424] sd 9:0:0:2: [sdf] Attached SCSI removable disk
[ 3.225675] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[ 3.229674] sd 9:0:0:3: [sdg] Attached SCSI removable disk
[ 3.876023] floppy0: no floppy controllers found
[ 5.920041] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.928789] ata7.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
[ 5.928792] ata7.00: 976773168 sectors, multi 16: LBA48
[ 5.944813] ata7.00: configured for UDMA/133
[ 5.944893] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 4E05 PQ: 0 ANSI: 5
[ 5.945094] sd 6:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.945102] sd 6:0:0:0: Attached scsi generic sg8 type 0
[ 5.945130] sd 6:0:0:0: [sdh] Write Protect is off
[ 5.945132] sd 6:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 5.945148] sd 6:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.945231] scsi 7:0:0:0: Direct-Access ATA WDC WD10EZEX-08Y 1A02 PQ: 0 ANSI: 5
[ 5.945489] sd 7:0:0:0: Attached scsi generic sg9 type 0
[ 5.945520] sd 7:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.945522] sd 7:0:0:0: [sdi] 4096-byte physical blocks
[ 5.945590] sd 7:0:0:0: [sdi] Write Protect is off
[ 5.945592] sd 7:0:0:0: [sdi] Mode Sense: 00 3a 00 00
[ 5.945613] sd 7:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.969881] sdh: sdh2 < sdh5 >
[ 5.970144] sd 6:0:0:0: [sdh] Attached SCSI disk
[ 5.974957] sdi: sdi1
[ 5.975164] sd 7:0:0:0: [sdi] Attached SCSI disk
[ 6.167987] PM: Starting manual resume from disk
[ 6.167992] PM: Hibernation image partition 8:24 present
[ 6.167993] PM: Looking for hibernation image.
[ 6.169782] PM: Image not found (code -22)
[ 6.169784] PM: Hibernation image not present or could not be loaded.
[ 6.203902] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.377642] random: nonblocking pool is initialized
[ 6.400733] lp: driver loaded but no devices found
[ 6.403403] ppdev: user-space parallel port driver
[ 6.408948] fuse init (API version 7.23)
[ 6.429905] systemd-udevd[201]: starting version 215
[ 6.515856] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.515861] ACPI: Power Button [PWRB]
[ 6.515928] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.515931] ACPI: Power Button [PWRF]
[ 6.540933] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.562274] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.562544] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.562604] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 6.567191] [drm] Initialized drm 1.1.0 20060810
[ 6.597515] [drm] radeon kernel modesetting enabled.
[ 6.605093] [drm] initializing kernel modesetting (RV730 0x1002:0x9490 0x174B:0xE880).
[ 6.605107] [drm] register mmio base: 0xFE8E0000
[ 6.605108] [drm] register mmio size: 65536
[ 6.605235] ATOM BIOS:
[ 6.605266] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 6.605269] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 6.605271] [drm] Detected VRAM RAM=512M, BAR=256M
[ 6.605272] [drm] RAM width 128bits DDR
[ 6.606167] gameport gameport0: EMU10K1 is pci0000:05:02.1/gameport0, io 0xec00, speed 1065kHz
[ 6.616190] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[ 6.623067] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.623123] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.623125] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.623127] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.623128] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 6.623130] sound hdaudioC0D0: inputs:
[ 6.623132] sound hdaudioC0D0: Front Mic=0x19
[ 6.623134] sound hdaudioC0D0: Rear Mic=0x18
[ 6.623136] sound hdaudioC0D0: Line=0x1a
[ 6.634482] usbcore: registered new interface driver usbserial
[ 6.634499] usbcore: registered new interface driver usbserial_generic
[ 6.634510] usbserial: USB Serial support registered for generic
[ 6.638692] usbcore: registered new interface driver option
[ 6.638708] usbserial: USB Serial support registered for GSM modem (1-port)
[ 6.638806] option 2-4:1.0: GSM modem (1-port) converter detected
[ 6.638885] usb 2-4: GSM modem (1-port) converter now attached to ttyUSB0
[ 6.638921] option 2-4:1.1: GSM modem (1-port) converter detected
[ 6.638982] usb 2-4: GSM modem (1-port) converter now attached to ttyUSB1
[ 6.639020] option 2-4:1.3: GSM modem (1-port) converter detected
[ 6.639079] usb 2-4: GSM modem (1-port) converter now attached to ttyUSB2
[ 6.658112] [TTM] Zone kernel: Available graphics memory: 429838 kiB
[ 6.658115] [TTM] Zone highmem: Available graphics memory: 2073106 kiB
[ 6.658116] [TTM] Initializing pool allocator
[ 6.658124] [TTM] Initializing DMA pool allocator
[ 6.658147] [drm] radeon: 512M of VRAM memory ready
[ 6.658148] [drm] radeon: 1024M of GTT memory ready.
[ 6.658165] [drm] Loading RV730 Microcode
[ 6.660506] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_pfp.bin
[ 6.661297] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_me.bin
[ 6.662924] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R700_rlc.bin
[ 6.663421] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_smc.bin
[ 6.663427] [drm] Internal thermal controller with fan control
[ 6.664610] [drm] radeon: dpm initialized
[ 6.665471] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV710_uvd.bin
[ 6.665501] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 6.692637] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 6.692691] radeon 0000:01:00.0: WB enabled
[ 6.692695] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xff68dc00
[ 6.692697] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xff68dc0c
[ 6.693510] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xf861c598
[ 6.693512] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.693513] [drm] Driver supports precise vblank timestamp query.
[ 6.693515] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 6.693535] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 6.693547] radeon 0000:01:00.0: radeon: using MSI.
[ 6.693571] [drm] radeon: irq initialized.
[ 6.734025] ACPI Warning: SystemIO range 0x00000400-0x0000041f conflicts with OpRegion 0x00000400-0x0000040f (\SMRG) (20140424/utaddress-258)
[ 6.734032] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.752795] [drm] ring test on 0 succeeded in 0 usecs
[ 6.752804] [drm] ring test on 3 succeeded in 2 usecs
[ 6.768641] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.785353] Adding 4113404k swap on /dev/sdb8. Priority:-1 extents:1 across:4113404k SSFS
[ 6.792207] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[ 6.815915] EXT4-fs (sdb5): mounting ext2 file system using the ext4 subsystem
[ 6.828325] EXT4-fs (sdb5): mounted filesystem without journal. Opts: (null)
[ 6.839168] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.862397] systemd-journald[189]: Received request to flush runtime journal from PID 1
[ 6.866635] iTCO_vendor_support: vendor-support=0
[ 6.867057] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.867094] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 6.867186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.948217] [drm] ring test on 5 succeeded in 1 usecs
[ 6.948222] [drm] UVD initialized successfully.
[ 6.949071] [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.949091] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.108535] [drm] ib test on ring 5 succeeded
[ 7.108830] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input5
[ 7.113673] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.113930] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.114082] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.114232] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.114385] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.115856] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.116026] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.118568] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.130363] [drm] Radeon Display Connectors
[ 7.130366] [drm] Connector 0:
[ 7.130367] [drm] DVI-I-1
[ 7.130368] [drm] HPD2
[ 7.130370] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 7.130371] [drm] Encoders:
[ 7.130372] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.130374] [drm] DFP2: INTERNAL_UNIPHY1
[ 7.130375] [drm] Connector 1:
[ 7.130376] [drm] DIN-1
[ 7.130377] [drm] Encoders:
[ 7.130378] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.130379] [drm] Connector 2:
[ 7.130380] [drm] DVI-I-2
[ 7.130381] [drm] HPD1
[ 7.130382] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 7.130383] [drm] Encoders:
[ 7.130384] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.130385] [drm] DFP1: INTERNAL_UNIPHY
[ 7.187783] RPC: Registered named UNIX socket transport module.
[ 7.187787] RPC: Registered udp transport module.
[ 7.187788] RPC: Registered tcp transport module.
[ 7.187790] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.191229] FS-Cache: Loaded
[ 7.197497] FS-Cache: Netfs 'nfs' registered for caching
[ 7.204357] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.210380] [drm] fb mappable at 0xD045E000
[ 7.210382] [drm] vram apper at 0xD0000000
[ 7.210384] [drm] size 7299072
[ 7.210385] [drm] fb depth is 24
[ 7.210386] [drm] pitch is 6912
[ 7.210489] fbcon: radeondrmfb (fb0) is primary device
[ 7.249392] Console: switching to colour frame buffer device 160x64
[ 7.254881] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.254884] radeon 0000:01:00.0: registered panic notifier
[ 7.274228] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[ 7.481293] cfg80211: Calling CRDA to update world regulatory domain
[ 7.630009] cfg80211: World regulatory domain updated:
[ 7.630014] cfg80211: DFS Master region: unset
[ 7.630016] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.630019] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.630021] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.630023] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.630026] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 7.630029] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 7.630031] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.630033] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.630035] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 7.689770] usb 2-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[ 7.690465] usb 2-1: dvb_usb_v2: found a 'ITE 9135 Generic' in warm state
[ 7.691881] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 7.691912] DVB: registering new adapter (ITE 9135 Generic)
[ 7.715149] i2c i2c-7: af9033: firmware version: LINK=0.0.0.0 OFDM=3.17.1.0
[ 7.715157] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 7.718771] i2c i2c-7: tuner_it913x: ITE Tech IT913X successfully attached
[ 7.784021] Registered IR keymap rc-it913x-v1
[ 7.784121] input: ITE 9135 Generic as /devices/pci0000:00/0000:00:1a.7/usb2/2-1/rc/rc0/input15
[ 7.784792] rc0: ITE 9135 Generic as /devices/pci0000:00/0000:00:1a.7/usb2/2-1/rc/rc0
[ 7.784796] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 7.784799] usb 2-1: dvb_usb_v2: 'ITE 9135 Generic' successfully initialized and connected
[ 7.784827] usbcore: registered new interface driver dvb_usb_af9035
[ 7.821284] atl1 0000:02:00.0: irq 47 for MSI/MSI-X
[ 7.821468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.548024] floppy0: no floppy controllers found
[ 36.367339] PPP generic driver version 2.4.2
[ 36.399170] PPP BSD Compression module registered
[ 36.400957] PPP Deflate Compression module registeredOffline
#6 2015-11-19 20:27:08
patria - Użytkownik
- patria
- Użytkownik
- Zarejestrowany: 2013-05-28
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
dmesg przy nie działającym tunerze:
Kod:
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: System manufacturer P5K/P5K, BIOS 1201 10/14/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] BRK [0x01799000, 0x0179afff] PGTABLE
[ 0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362a4000-0x37149fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FBCD0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0xCFF80000 00003C (v01 A_M_I_ OEMRSDT 10000814 MSFT 00000097)
[ 0.000000] ACPI: FACP 0xCFF80200 000084 (v02 A_M_I_ OEMFACP 10000814 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0xCFF80440 0090AA (v01 A0751 A0751077 00000077 INTL 20060113)
[ 0.000000] ACPI: FACS 0xCFF8E000 000040
[ 0.000000] ACPI: APIC 0xCFF80390 00006C (v01 A_M_I_ OEMAPIC 10000814 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0xCFF80400 00003C (v01 A_M_I_ OEMMCFG 10000814 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0xCFF8E040 000081 (v01 A_M_I_ AMI_OEM 10000814 MSFT 00000097)
[ 0.000000] ACPI: HPET 0xCFF894F0 000038 (v01 A_M_I_ OEMHPET 10000814 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0xCFF89530 0000B0 (v01 A_M_I_ OEMOSFR 10000814 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3978MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x2fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcff7ffff]
[ 0.000000] node 0: [mem 0x00000000-0x2fffffff]
[ 0.000000] On node 0 totalpages: 1048350
[ 0.000000] free_area_init_node: node 0, pgdat c1658ec0, node_mem_map f3ca4020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7957 pages used for memmap
[ 0.000000] HighMem zone: 821634 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75b4000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1046578
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=8e593d33-3055-4d60-9c09-df554c17fc67 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:00130000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 4130536K/4193400K available (4599K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 62864K reserved, 3286536K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc166d000 - 0xc1711000 ( 656 kB)
.data : 0xc147e340 - 0xc166b880 (1973 kB)
.text : 0xc1000000 - 0xc147e340 (4600 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3806000 soft=f3808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2671.495 MHz processor
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5342.99 BogoMIPS (lpj=10685980)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004022] ACPI: Core revision 20140424
[ 0.013846] ACPI: All ACPI Tables successfully acquired
[ 0.016027] Security Framework initialized
[ 0.016042] AppArmor: AppArmor disabled by boot time parameter
[ 0.016044] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.016061] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.016063] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.016308] Initializing cgroup subsys memory
[ 0.016314] Initializing cgroup subsys devices
[ 0.016321] Initializing cgroup subsys freezer
[ 0.016324] Initializing cgroup subsys net_cls
[ 0.016329] Initializing cgroup subsys blkio
[ 0.016333] Initializing cgroup subsys perf_event
[ 0.016336] Initializing cgroup subsys net_prio
[ 0.016359] CPU: Physical Processor ID: 0
[ 0.016361] CPU: Processor Core ID: 0
[ 0.016366] mce: CPU supports 6 MCE banks
[ 0.016374] CPU0: Thermal monitoring enabled (TM2)
[ 0.016377] process: using mwait in idle threads
[ 0.016384] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.016512] Freeing SMP alternatives memory: 20K (c1711000 - c1716000)
[ 0.020131] ftrace: allocating 20756 entries in 41 pages
[ 0.024051] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064964] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz (fam: 06, model: 17, stepping: 06)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] CPU 1 irqstacks, hard=f3946000 soft=f3948000
[ 0.068000] x86: Booting SMP configuration:
[ 0.068000] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.079038] x86: Booted up 1 node, 2 CPUs
[ 0.079043] smpboot: Total of 2 processors activated (10685.98 BogoMIPS)
[ 0.079133] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080107] devtmpfs: initialized
[ 0.080259] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
[ 0.080388] pinctrl core: initialized pinctrl subsystem
[ 0.080465] NET: Registered protocol family 16
[ 0.080573] cpuidle: using governor ladder
[ 0.080576] cpuidle: using governor menu
[ 0.080623] ACPI: bus type PCI registered
[ 0.080626] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.080705] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.080707] PCI: not using MMCONFIG
[ 0.080822] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.080872] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.080873] PCI: Using configuration type 1 for base access
[ 0.092077] ACPI: Added _OSI(Module Device)
[ 0.092077] ACPI: Added _OSI(Processor Device)
[ 0.092077] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092077] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.097166] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.101917] ACPI: Dynamic OEM Table Load:
[ 0.101922] ACPI: SSDT 0xF3A06A00 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.102320] ACPI: Dynamic OEM Table Load:
[ 0.102324] ACPI: SSDT 0xF3A06800 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.102696] ACPI: Interpreter enabled
[ 0.102713] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.102725] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.102727] ACPI: Using IOAPIC for interrupt routing
[ 0.102746] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.103212] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.103213] PCI: Using MMCONFIG for extended config space
[ 0.103227] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.109471] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.109477] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.109482] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.109732] PCI host bridge to bus 0000:00
[ 0.109735] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.109737] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.109739] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.109741] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.109743] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.109745] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.109753] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.109846] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.109881] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.109919] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.109984] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.110020] pci 0000:00:1a.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.110101] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.110147] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.110185] pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.110264] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.110311] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.110346] pci 0000:00:1a.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.110426] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.110479] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.110497] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.110574] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.110616] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.110667] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.110682] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[ 0.110743] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.110824] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.110887] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.110930] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.110978] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.111041] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.111084] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.111128] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.111191] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.111235] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.111282] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.111318] pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f]
[ 0.111397] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.111443] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.111479] pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f]
[ 0.111557] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.111605] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.111641] pci 0000:00:1d.2: reg 0x20: [io 0xb480-0xb49f]
[ 0.111719] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.111774] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.111792] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff]
[ 0.111869] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.111911] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.111957] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.112037] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.112086] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.112154] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.112159] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.112162] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.112262] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[ 0.112275] pci 0000:00:1f.2: reg 0x10: [io 0xa000-0xa007]
[ 0.112282] pci 0000:00:1f.2: reg 0x14: [io 0x9c00-0x9c03]
[ 0.112288] pci 0000:00:1f.2: reg 0x18: [io 0x9880-0x9887]
[ 0.112295] pci 0000:00:1f.2: reg 0x1c: [io 0x9800-0x9803]
[ 0.112302] pci 0000:00:1f.2: reg 0x20: [io 0x9480-0x948f]
[ 0.112308] pci 0000:00:1f.2: reg 0x24: [io 0x9400-0x940f]
[ 0.112404] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.112417] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[ 0.112434] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.112519] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.112532] pci 0000:00:1f.5: reg 0x10: [io 0xb000-0xb007]
[ 0.112539] pci 0000:00:1f.5: reg 0x14: [io 0xac00-0xac03]
[ 0.112546] pci 0000:00:1f.5: reg 0x18: [io 0xa880-0xa887]
[ 0.112552] pci 0000:00:1f.5: reg 0x1c: [io 0xa800-0xa803]
[ 0.112559] pci 0000:00:1f.5: reg 0x20: [io 0xa480-0xa48f]
[ 0.112565] pci 0000:00:1f.5: reg 0x24: [io 0xa400-0xa40f]
[ 0.112705] pci 0000:01:00.0: [1002:9490] type 00 class 0x030000
[ 0.112718] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.112728] pci 0000:01:00.0: reg 0x18: [mem 0xfe8e0000-0xfe8effff 64bit]
[ 0.112734] pci 0000:01:00.0: reg 0x20: [io 0xc000-0xc0ff]
[ 0.112745] pci 0000:01:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref]
[ 0.112773] pci 0000:01:00.0: supports D1 D2
[ 0.112822] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[ 0.112834] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[ 0.112885] pci 0000:01:00.1: supports D1 D2
[ 0.112941] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.112944] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.112947] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.112950] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.113001] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.113009] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.113091] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.113174] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[ 0.113186] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[ 0.113237] pci 0000:03:00.0: PME# supported from D3hot
[ 0.113311] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.113330] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.113340] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883]
[ 0.113349] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807]
[ 0.113358] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483]
[ 0.113368] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f]
[ 0.113475] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.113484] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.113487] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.113490] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.113560] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[ 0.113584] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[ 0.113631] pci 0000:02:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
[ 0.113683] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.113738] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.113746] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.113751] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.113801] pci 0000:05:02.0: [1102:0004] type 00 class 0x040100
[ 0.113815] pci 0000:05:02.0: reg 0x10: [io 0xe880-0xe89f]
[ 0.113879] pci 0000:05:02.0: supports D1 D2
[ 0.113922] pci 0000:05:02.1: [1102:7003] type 00 class 0x098000
[ 0.113936] pci 0000:05:02.1: reg 0x10: [io 0xec00-0xec07]
[ 0.113999] pci 0000:05:02.1: supports D1 D2
[ 0.114046] pci 0000:05:02.2: [1102:4001] type 00 class 0x0c0010
[ 0.114061] pci 0000:05:02.2: reg 0x10: [mem 0xfebff800-0xfebfffff]
[ 0.114070] pci 0000:05:02.2: reg 0x14: [mem 0xfebf8000-0xfebfbfff]
[ 0.114130] pci 0000:05:02.2: supports D1 D2
[ 0.114132] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.114192] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.114207] pci 0000:05:03.0: reg 0x10: [mem 0xfebff000-0xfebff7ff]
[ 0.114216] pci 0000:05:03.0: reg 0x14: [io 0xe800-0xe87f]
[ 0.114276] pci 0000:05:03.0: supports D2
[ 0.114278] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[ 0.114352] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.114356] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.114359] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.114364] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.114365] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.114367] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.114369] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.114371] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.114395] pci_bus 0000:00: on NUMA node 0
[ 0.114940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.114994] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.115045] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.115097] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.115148] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.115200] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.115251] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.115303] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.115357] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.115428] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.115428] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115428] vgaarb: loaded
[ 0.115428] vgaarb: bridge control possible 0000:01:00.0
[ 0.115428] PCI: Using ACPI for IRQ routing
[ 0.115428] PCI: pci_cache_line_size set to 64 bytes
[ 0.115428] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.115428] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[ 0.115428] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.115428] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.115428] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.120017] Switched to clocksource hpet
[ 0.126379] pnp: PnP ACPI init
[ 0.126393] ACPI: bus type PNP registered
[ 0.126457] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.126461] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.126525] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.126687] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.126690] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126857] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.126860] system 00:03: [io 0x0800-0x087f] could not be reserved
[ 0.126862] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.126865] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.126867] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.126869] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.126872] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.126874] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.126876] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved
[ 0.126878] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.126881] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127106] pnp 00:04: [dma 0 disabled]
[ 0.127170] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.127252] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.127255] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.127257] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127317] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.127386] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.127389] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127573] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.127576] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.127578] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.127580] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.127583] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.127697] pnp: PnP ACPI: found 9 devices
[ 0.127698] ACPI: bus type PNP unregistered
[ 0.127703] PnPBIOS: Disabled by ACPI PNP
[ 0.164332] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.164336] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[ 0.164344] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.164351] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.164353] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.164363] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.164366] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.164368] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.164371] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.164373] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.164375] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.164380] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.164386] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.164391] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.164394] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.164397] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.164399] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.164401] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.164404] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.164407] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.164410] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.164413] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.164417] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.164420] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.164425] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.164427] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.164431] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.164434] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.164439] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.164441] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.164445] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.164449] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.164454] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.164456] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.164460] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.164467] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.164468] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.164470] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.164472] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.164474] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.164476] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.164478] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.164480] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.164482] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.164484] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.164486] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.164488] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.164489] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.164491] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.164493] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.164495] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.164497] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.164499] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.164501] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.164502] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.164504] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.164506] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.164508] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.164509] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.164546] NET: Registered protocol family 2
[ 0.164750] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.164766] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.164791] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.164810] TCP: reno registered
[ 0.164812] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.164820] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.164873] NET: Registered protocol family 1
[ 0.165784] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.165801] PCI: CLS 32 bytes, default 64
[ 0.165843] Unpacking initramfs...
[ 0.446451] Freeing initrd memory: 15000K (f62a4000 - f714a000)
[ 0.446708] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[ 0.446717] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[ 0.446809] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.447119] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.447193] audit: initializing netlink subsys (disabled)
[ 0.447218] audit: type=2000 audit(1447960763.444:1): initialized
[ 0.447522] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.447539] zbud: loaded
[ 0.447623] VFS: Disk quotas dquot_6.5.2
[ 0.447640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.447699] msgmni has been set to 1677
[ 0.448020] alg: No test for stdrng (krng)
[ 0.448042] bounce: pool size: 64 pages
[ 0.448058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.448102] io scheduler noop registered
[ 0.448104] io scheduler deadline registered
[ 0.448136] io scheduler cfq registered (default)
[ 0.448350] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.448401] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.448468] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.448589] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.448648] pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.448713] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.448806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.448825] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.448846] intel_idle: does not run on family 6 model 23
[ 0.448901] GHES: HEST is not enabled!
[ 0.448920] isapnp: Scanning for PnP cards...
[ 0.801629] isapnp: No Plug & Play device found
[ 0.801700] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.822049] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.822458] Linux agpgart interface v0.103
[ 0.822742] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.822743] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.823267] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.823374] mousedev: PS/2 mouse device common for all mice
[ 0.823430] rtc_cmos 00:01: RTC can wake from S4
[ 0.823542] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.823565] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.823581] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.824114] TCP: cubic registered
[ 0.824140] NET: Registered protocol family 10
[ 0.824362] mip6: Mobile IPv6
[ 0.824365] NET: Registered protocol family 17
[ 0.824370] mpls_gso: MPLS GSO support
[ 0.824511] Using IPI No-Shortcut mode
[ 0.824619] registered taskstats version 1
[ 0.825049] rtc_cmos 00:01: setting system clock to 2015-11-19 19:19:24 UTC (1447960764)
[ 0.825104] PM: Hibernation image not present or could not be loaded.
[ 0.825464] Freeing unused kernel memory: 656K (c166d000 - c1711000)
[ 0.825497] Write protecting the kernel text: 4604k
[ 0.825533] Write protecting the kernel read-only data: 1452k
[ 0.825534] NX-protecting the kernel data: 3588k
[ 0.833855] systemd-udevd[60]: starting version 215
[ 0.834165] random: systemd-udevd urandom read with 0 bits of entropy available
[ 0.842794] ACPI: bus type USB registered
[ 0.842824] usbcore: registered new interface driver usbfs
[ 0.842836] usbcore: registered new interface driver hub
[ 0.844079] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.846656] atl1 0000:02:00.0: version 2.1.3
[ 0.848681] SCSI subsystem initialized
[ 0.849908] usbcore: registered new device driver usb
[ 0.850351] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.850643] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.850773] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.850780] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.850786] ehci-pci: EHCI PCI platform driver
[ 0.850788] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.850820] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.851569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.851571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.851574] usb usb1: Product: UHCI Host Controller
[ 0.851575] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.851577] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.851707] hub 1-0:1.0: USB hub found
[ 0.851713] hub 1-0:1.0: 2 ports detected
[ 0.851900] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.851906] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.851912] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.851937] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.851975] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.851977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.851979] usb usb2: Product: UHCI Host Controller
[ 0.851981] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.851982] usb usb2: SerialNumber: 0000:00:1a.1
[ 0.852119] hub 2-0:1.0: USB hub found
[ 0.852125] hub 2-0:1.0: 2 ports detected
[ 0.852289] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.852295] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 0.852300] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.852324] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.852362] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.852364] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.852366] usb usb3: Product: UHCI Host Controller
[ 0.852367] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.852369] usb usb3: SerialNumber: 0000:00:1a.2
[ 0.852478] hub 3-0:1.0: USB hub found
[ 0.852483] hub 3-0:1.0: 2 ports detected
[ 0.852674] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.852679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.852685] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.852710] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.852821] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.852823] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.852825] usb usb4: Product: UHCI Host Controller
[ 0.852826] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.852828] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.852939] hub 4-0:1.0: USB hub found
[ 0.852945] hub 4-0:1.0: 2 ports detected
[ 0.853109] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.853115] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 0.853120] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.853144] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.853184] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.853186] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.853188] usb usb5: Product: UHCI Host Controller
[ 0.853190] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.853191] usb usb5: SerialNumber: 0000:00:1d.1
[ 0.853299] hub 5-0:1.0: USB hub found
[ 0.853305] hub 5-0:1.0: 2 ports detected
[ 0.853812] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.853817] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 0.853829] ehci-pci 0000:00:1a.7: debug port 1
[ 0.857718] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.857793] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 0.857858] libata version 3.00 loaded.
[ 0.858514] ahci 0000:03:00.0: version 3.0
[ 0.868019] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.868339] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.868342] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.868344] usb usb6: Product: EHCI Host Controller
[ 0.868345] usb usb6: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 0.868347] usb usb6: SerialNumber: 0000:00:1a.7
[ 0.868457] hub 6-0:1.0: USB hub found
[ 0.868463] hub 6-0:1.0: 6 ports detected
[ 0.872097] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.872100] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.872524] scsi0 : ahci
[ 0.872617] scsi1 : ahci
[ 0.872677] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 0.872680] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 0.872719] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.873485] scsi2 : pata_jmicron
[ 0.873565] scsi3 : pata_jmicron
[ 0.873618] ata3: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 0.873619] ata4: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 0.892089] hub 1-0:1.0: USB hub found
[ 0.892096] hub 1-0:1.0: 2 ports detected
[ 0.916052] hub 2-0:1.0: USB hub found
[ 0.916059] hub 2-0:1.0: 2 ports detected
[ 0.928032] firewire_ohci 0000:05:02.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.940052] hub 3-0:1.0: USB hub found
[ 0.940059] hub 3-0:1.0: 2 ports detected
[ 0.940352] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.940358] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 0.940369] ehci-pci 0000:00:1d.7: debug port 1
[ 0.944264] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.944271] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 0.956012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.956054] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.956056] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.956058] usb usb7: Product: EHCI Host Controller
[ 0.956060] usb usb7: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 0.956061] usb usb7: SerialNumber: 0000:00:1d.7
[ 0.956170] hub 7-0:1.0: USB hub found
[ 0.956176] hub 7-0:1.0: 6 ports detected
[ 0.980071] hub 4-0:1.0: USB hub found
[ 0.980080] hub 4-0:1.0: 2 ports detected
[ 0.992042] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x11
[ 1.004069] hub 5-0:1.0: USB hub found
[ 1.004078] hub 5-0:1.0: 2 ports detected
[ 1.004232] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.004238] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.004244] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.004261] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.004307] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.004309] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.004311] usb usb8: Product: UHCI Host Controller
[ 1.004313] usb usb8: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.004314] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.004428] hub 8-0:1.0: USB hub found
[ 1.004435] hub 8-0:1.0: 2 ports detected
[ 1.004897] ata_piix 0000:00:1f.2: version 2.13
[ 1.004963] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.006977] scsi4 : ata_piix
[ 1.007059] scsi5 : ata_piix
[ 1.007114] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 1.007117] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 1.007187] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.009071] scsi6 : ata_piix
[ 1.009156] scsi7 : ata_piix
[ 1.009210] ata7: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 1.009213] ata8: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 1.045569] ata3.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
[ 1.045573] ata3.01: 488397168 sectors, multi 0: LBA48
[ 1.052678] ata3.01: configured for UDMA/100
[ 1.180030] usb 6-1: new high-speed USB device number 2 using ehci-pci
[ 1.192031] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.192061] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.192195] scsi 2:0:1:0: Direct-Access ATA WDC WD2500JB-00R 0K20 PQ: 0 ANSI: 5
[ 1.314089] usb 6-1: New USB device found, idVendor=048d, idProduct=9135
[ 1.314093] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.424023] usb 6-4: new high-speed USB device number 3 using ehci-pci
[ 1.428086] firewire_core 0000:05:02.2: created device fw0: GUID 00023c00300550f7, S400
[ 1.444016] tsc: Refined TSC clocksource calibration: 2671.603 MHz
[ 1.484043] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.484141] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.484231] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.492176] firewire_core 0000:05:03.0: created device fw1: GUID 001e8c0000117773, S400
[ 1.492264] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LM00, max UDMA/133
[ 1.492386] ata8.00: ATA-9: WDC WD10EZEX-08Y20A0, 02.01A02, max UDMA/100
[ 1.492388] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.500251] ata8.00: configured for UDMA/100
[ 1.508189] ata6.00: configured for UDMA/133
[ 1.510081] ata5.00: ATA-8: KINGSTON SH103S3120G, 521ABBF0, max UDMA/133
[ 1.510084] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.541923] ata5.00: configured for UDMA/133
[ 1.542006] scsi 4:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[ 1.543038] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LM00 PQ: 0 ANSI: 5
[ 1.572090] usb 6-4: New USB device found, idVendor=19d2, idProduct=2000
[ 1.572093] usb 6-4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 1.572096] usb 6-4: Product: ZTE WCDMA Technologies MSM
[ 1.572098] usb 6-4: Manufacturer: ZTE,Incorporated
[ 1.572100] usb 6-4: SerialNumber: MF6310ZTED010000
[ 1.575664] usb-storage 6-4:1.0: USB Mass Storage device detected
[ 1.575720] scsi8 : usb-storage 6-4:1.0
[ 1.575790] usbcore: registered new interface driver usb-storage
[ 1.740023] usb 7-4: new high-speed USB device number 2 using ehci-pci
[ 1.919940] usb 7-4: New USB device found, idVendor=0424, idProduct=2228
[ 1.919943] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.919946] usb 7-4: Product: Flash Card Reader
[ 1.919948] usb 7-4: Manufacturer: Generic
[ 1.919950] usb 7-4: SerialNumber: 000022272228
[ 1.920235] usb-storage 7-4:1.0: USB Mass Storage device detected
[ 1.920304] scsi9 : usb-storage 7-4:1.0
[ 2.444049] Switched to clocksource tsc
[ 2.568015] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 2.573054] scsi 8:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
[ 2.583223] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.583226] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.583379] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.584971] sr1: scsi-1 drive
[ 2.585150] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 2.585524] scsi 2:0:1:0: Attached scsi generic sg0 type 0
[ 2.585560] scsi 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.585693] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 2.585729] sr 8:0:0:0: Attached scsi generic sg3 type 5
[ 2.929955] scsi 9:0:0:0: Direct-Access Generic Flash HS-CF 3.95 PQ: 0 ANSI: 0
[ 2.933829] scsi 9:0:0:1: Direct-Access Generic Flash HS-MS 3.95 PQ: 0 ANSI: 0
[ 2.937577] scsi 9:0:0:2: Direct-Access Generic Flash HS-SM 3.95 PQ: 0 ANSI: 0
[ 2.940827] scsi 9:0:0:3: Direct-Access Generic Flash HS-SD/MMC 3.95 PQ: 0 ANSI: 0
[ 2.941033] scsi 9:0:0:0: Attached scsi generic sg4 type 0
[ 2.941414] scsi 9:0:0:1: Attached scsi generic sg5 type 0
[ 2.941548] scsi 9:0:0:2: Attached scsi generic sg6 type 0
[ 2.941889] scsi 9:0:0:3: Attached scsi generic sg7 type 0
[ 2.942712] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.942761] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.942764] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.942780] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.943016] sd 2:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.943061] sd 2:0:1:0: [sda] Write Protect is off
[ 2.943064] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.943081] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.946970] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 >
[ 2.947598] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.952350] sda: sda1
[ 2.952564] sd 2:0:1:0: [sda] Attached SCSI disk
[ 3.028066] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 3.032440] sd 9:0:0:1: [sdd] Attached SCSI removable disk
[ 3.037441] sd 9:0:0:2: [sde] Attached SCSI removable disk
[ 3.045065] sd 9:0:0:3: [sdf] Attached SCSI removable disk
[ 3.149032] usb 3-2: New USB device found, idVendor=09da, idProduct=000e
[ 3.149036] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.149038] usb 3-2: Product: PS/2+USB Mouse
[ 3.149041] usb 3-2: Manufacturer: A4Tech
[ 3.162923] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.177404] usbcore: registered new interface driver usbhid
[ 3.177406] usbhid: USB HID core driver
[ 3.178119] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/0003:09DA:000E.0001/input/input1
[ 3.178189] hid-generic 0003:09DA:000E.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.2-2/input0
[ 3.876021] floppy0: no floppy controllers found
[ 6.020040] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.028796] ata7.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
[ 6.028800] ata7.00: 976773168 sectors, multi 16: LBA48
[ 6.044803] ata7.00: configured for UDMA/133
[ 6.044887] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 4E05 PQ: 0 ANSI: 5
[ 6.045156] sd 6:0:0:0: Attached scsi generic sg8 type 0
[ 6.045237] sd 6:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.045571] scsi 7:0:0:0: Direct-Access ATA WDC WD10EZEX-08Y 1A02 PQ: 0 ANSI: 5
[ 6.045744] sd 7:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.045746] sd 7:0:0:0: [sdh] 4096-byte physical blocks
[ 6.045772] sd 7:0:0:0: Attached scsi generic sg9 type 0
[ 6.045815] sd 7:0:0:0: [sdh] Write Protect is off
[ 6.045817] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 6.045860] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.046058] sd 6:0:0:0: [sdg] Write Protect is off
[ 6.046061] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 6.046424] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.059036] sdh: sdh1
[ 6.059238] sd 7:0:0:0: [sdh] Attached SCSI disk
[ 6.064193] sdg: sdg2 < sdg5 >
[ 6.064672] sd 6:0:0:0: [sdg] Attached SCSI disk
[ 6.274431] PM: Starting manual resume from disk
[ 6.274435] PM: Hibernation image partition 8:24 present
[ 6.274437] PM: Looking for hibernation image.
[ 6.276499] PM: Image not found (code -22)
[ 6.276501] PM: Hibernation image not present or could not be loaded.
[ 6.311686] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.347439] random: nonblocking pool is initialized
[ 6.504455] lp: driver loaded but no devices found
[ 6.506955] ppdev: user-space parallel port driver
[ 6.512399] fuse init (API version 7.23)
[ 6.536274] systemd-udevd[199]: starting version 215
[ 6.623300] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.623305] ACPI: Power Button [PWRB]
[ 6.623465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.623468] ACPI: Power Button [PWRF]
[ 6.628496] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.667100] [drm] Initialized drm 1.1.0 20060810
[ 6.671422] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.671516] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.671540] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 6.701979] gameport gameport0: EMU10K1 is pci0000:05:02.1/gameport0, io 0xec00, speed 1065kHz
[ 6.702579] [drm] radeon kernel modesetting enabled.
[ 6.720833] [drm] initializing kernel modesetting (RV730 0x1002:0x9490 0x174B:0xE880).
[ 6.720850] [drm] register mmio base: 0xFE8E0000
[ 6.720851] [drm] register mmio size: 65536
[ 6.720946] ATOM BIOS:
[ 6.720982] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 6.720984] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 6.720986] [drm] Detected VRAM RAM=512M, BAR=256M
[ 6.720988] [drm] RAM width 128bits DDR
[ 6.721190] [TTM] Zone kernel: Available graphics memory: 429838 kiB
[ 6.721192] [TTM] Zone highmem: Available graphics memory: 2073106 kiB
[ 6.721194] [TTM] Initializing pool allocator
[ 6.721199] [TTM] Initializing DMA pool allocator
[ 6.721221] [drm] radeon: 512M of VRAM memory ready
[ 6.721222] [drm] radeon: 1024M of GTT memory ready.
[ 6.721236] [drm] Loading RV730 Microcode
[ 6.725348] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_pfp.bin
[ 6.726329] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_me.bin
[ 6.727198] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R700_rlc.bin
[ 6.727740] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_smc.bin
[ 6.727745] [drm] Internal thermal controller with fan control
[ 6.728848] [drm] radeon: dpm initialized
[ 6.732512] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV710_uvd.bin
[ 6.732541] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 6.758448] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[ 6.763699] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 6.763732] radeon 0000:01:00.0: WB enabled
[ 6.763736] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xff68ac00
[ 6.763738] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xff68ac0c
[ 6.764618] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xf861c598
[ 6.768531] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.768535] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.768537] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.768538] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.768540] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 6.768541] sound hdaudioC0D0: inputs:
[ 6.768544] sound hdaudioC0D0: Front Mic=0x19
[ 6.768546] sound hdaudioC0D0: Rear Mic=0x18
[ 6.768547] sound hdaudioC0D0: Line=0x1a
[ 6.770763] ACPI Warning: SystemIO range 0x00000400-0x0000041f conflicts with OpRegion 0x00000400-0x0000040f (\SMRG) (20140424/utaddress-258)
[ 6.770768] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.776240] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.776242] [drm] Driver supports precise vblank timestamp query.
[ 6.776246] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 6.776262] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 6.776271] radeon 0000:01:00.0: radeon: using MSI.
[ 6.776296] [drm] radeon: irq initialized.
[ 6.823967] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[ 6.824261] [drm] ring test on 0 succeeded in 0 usecs
[ 6.824269] [drm] ring test on 3 succeeded in 2 usecs
[ 6.890314] Adding 4113404k swap on /dev/sdb8. Priority:-1 extents:1 across:4113404k SSFS
[ 6.897271] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.921888] EXT4-fs (sdb5): mounting ext2 file system using the ext4 subsystem
[ 6.927838] EXT4-fs (sdb5): mounted filesystem without journal. Opts: (null)
[ 6.965001] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.983587] systemd-journald[190]: Received request to flush runtime journal from PID 1
[ 7.019531] [drm] ring test on 5 succeeded in 1 usecs
[ 7.019537] [drm] UVD initialized successfully.
[ 7.019669] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.019685] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.039347] iTCO_vendor_support: vendor-support=0
[ 7.039792] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.039829] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 7.039919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.187660] [drm] ib test on ring 5 succeeded
[ 7.187982] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input5
[ 7.193394] [drm] Radeon Display Connectors
[ 7.193397] [drm] Connector 0:
[ 7.193398] [drm] DVI-I-1
[ 7.193399] [drm] HPD2
[ 7.193401] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 7.193402] [drm] Encoders:
[ 7.193403] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.193404] [drm] DFP2: INTERNAL_UNIPHY1
[ 7.193405] [drm] Connector 1:
[ 7.193406] [drm] DIN-1
[ 7.193407] [drm] Encoders:
[ 7.193408] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.193409] [drm] Connector 2:
[ 7.193410] [drm] DVI-I-2
[ 7.193411] [drm] HPD1
[ 7.193413] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 7.193414] [drm] Encoders:
[ 7.193415] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.193416] [drm] DFP1: INTERNAL_UNIPHY
[ 7.198133] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.198219] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.198291] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.198361] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.198432] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.198500] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.198568] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.198636] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.270205] [drm] fb mappable at 0xD045E000
[ 7.270208] [drm] vram apper at 0xD0000000
[ 7.270209] [drm] size 7299072
[ 7.270210] [drm] fb depth is 24
[ 7.270211] [drm] pitch is 6912
[ 7.270404] fbcon: radeondrmfb (fb0) is primary device
[ 7.306665] Console: switching to colour frame buffer device 160x64
[ 7.313218] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.313220] radeon 0000:01:00.0: registered panic notifier
[ 7.315622] RPC: Registered named UNIX socket transport module.
[ 7.315625] RPC: Registered udp transport module.
[ 7.315627] RPC: Registered tcp transport module.
[ 7.315628] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.318663] FS-Cache: Loaded
[ 7.324049] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[ 7.326393] FS-Cache: Netfs 'nfs' registered for caching
[ 7.334201] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.584724] cfg80211: Calling CRDA to update world regulatory domain
[ 7.621404] cfg80211: World regulatory domain updated:
[ 7.621408] cfg80211: DFS Master region: unset
[ 7.621410] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.621412] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.621414] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.621416] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.621418] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 7.621420] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 7.621422] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.621423] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.621425] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 7.849218] usb 6-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[ 7.849589] usb 6-1: dvb_usb_v2: found a 'ITE 9135 Generic' in cold state
[ 7.849607] usb 6-1: firmware: failed to load dvb-usb-it9135-02.fw (-2)
[ 7.849654] usb 6-1: Direct firmware load failed with error -2
[ 7.849656] usb 6-1: Falling back to user helper
[ 7.850291] usb 6-1: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-02.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -12
[ 7.850385] dvb_usb_af9035: probe of 6-1:1.0 failed with error -12
[ 7.850404] usbcore: registered new interface driver dvb_usb_af9035
[ 7.903560] atl1 0000:02:00.0: irq 47 for MSI/MSI-X
[ 7.904072] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.652038] floppy0: no floppy controllers found
[ 13.158141] usb 6-4: USB disconnect, device number 3
[ 13.524025] usb 6-4: new high-speed USB device number 5 using ehci-pci
[ 13.657971] usb 6-4: New USB device found, idVendor=19d2, idProduct=0031
[ 13.657975] usb 6-4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 13.657978] usb 6-4: Product: ZTE WCDMA Technologies MSM
[ 13.657980] usb 6-4: Manufacturer: ZTE,Incorporated
[ 13.657983] usb 6-4: SerialNumber: MF6310ZTED010000
[ 13.661331] usb-storage 6-4:1.2: USB Mass Storage device detected
[ 13.662963] scsi10 : usb-storage 6-4:1.2
[ 13.680610] usbcore: registered new interface driver usbserial
[ 13.680785] usbcore: registered new interface driver usbserial_generic
[ 13.680828] usbserial: USB Serial support registered for generic
[ 13.684748] usbcore: registered new interface driver option
[ 13.684768] usbserial: USB Serial support registered for GSM modem (1-port)
[ 13.684882] option 6-4:1.0: GSM modem (1-port) converter detected
[ 13.685197] usb 6-4: GSM modem (1-port) converter now attached to ttyUSB0
[ 13.685229] option 6-4:1.1: GSM modem (1-port) converter detected
[ 13.685366] usb 6-4: GSM modem (1-port) converter now attached to ttyUSB1
[ 13.685403] option 6-4:1.3: GSM modem (1-port) converter detected
[ 13.685528] usb 6-4: GSM modem (1-port) converter now attached to ttyUSB2
[ 14.661120] scsi 10:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
[ 14.662176] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 14.666603] sd 10:0:0:0: [sdi] Attached SCSI removable disk
piotr@BlaDeb:~$Offline
#7 2015-11-19 21:30:51
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
Dla 100 procentowej pewności pokaż jeszcze
Kod:
ls /lib/firmware | grep dvb-usb
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#8 2015-11-19 22:40:08
patria - Użytkownik
- patria
- Użytkownik
- Zarejestrowany: 2013-05-28
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
Kod:
ls /lib/firmware | grep dvb-usb dvb-usb-dib0700-1.20.fw
Offline
#9 2015-11-19 23:23:21
neo86 - Lubię marudzić
- neo86
- Lubię marudzić
- Skąd: California
- Zarejestrowany: 2014-06-29
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
[quote=ilin][quote=neo86]Pod VLC, MeTV był wykrywany ale nie wykrywał mi w ogóle kanałów TV i radiowych.[/quote]
Jakbyś potrafił się tymi programami posługiwać to i w nich by wszystko działało.[/quote]
Miałeś ten tuner, że wiesz lepiej? Jeśli nie to sorry ale się mylisz.
VLC przeleciał wszystkie częstotliwości, MeTV też. Pół godziny zajęło jednemu i pół drugiemu. Ani jednego kanału nie znalazł. Włączyłem Kaffeine i znalazł mi 35 na 40 dostępnych w kablówce i to w 15 minut. Nieźle jak na Tuner chińskiej produkcji za 25 zł. I to na czystym kablu TV bez wzmocnienia przy użyciu zasilacza (często wymagane do tunerów/dekoderów DVB).
[quote=patria]
Kod:
ls /lib/firmware | grep dvb-usb dvb-usb-dib0700-1.20.fw
[/quote]
To jest zły firmware. Dlatego masz problem z Tunerem. do Zolid Mini DVB-T Stick poprawny firmware to jeden z tych:
[url=http://palosaari.fi/linux/v4l-dvb/firmware/IT9135/12.10.04.1/]it9135-01.fw[/url]
[url=https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-usb-it9137-01.fw]it9137-01.fw[/url]
[url=https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-usb-it9135-02.fw]it9135-02.fw[/url]
Wrzuć wszystkie i możliwe, że chińczyk sam dobierze sobie poprawny firmware. Ja tak zrobiłem i mi poprawnie działa ale tylko w Kaffeine. Nie ma co wiele wymagać od taniego chińskiego chipa.
Ja takiego Zolid Mini DVB-T Stick używam (z przejściówką do kabla antenowego):
[url=http://postimg.org/image/n62q6x8y3/][img]http://s25.postimg.org/n62q6x8y3/tuner_dvb.jpg[/img][/url]
i on u mnie współpracuje z firmware it9135-01.fw
U Ciebie w nazwie w terminalu widnieje oznaczenie "9135" co oznacza, że powinno współpracować z firmware takim jak u mnie czyli it9135-01.fw lub it9135-02.fw ale to musisz sprawdzić. Ale zdecydowanie dvb-usb-dib0700-1.20.fw jest niepoprawne. I nie jest ono do tego tunera.
Ostatnio edytowany przez neo86 (2015-11-19 23:53:21)
Offline
#10 2015-11-20 05:30:02
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
[quote=neo86]Miałeś ten tuner, że wiesz lepiej? Jeśli nie to sorry ale się mylisz.[/quote]
Oj neo.
Dla tych programów listę kanałów generuje się za pomocą wscan.
Następnie dla vlc podaje się plik z listą jako argument przy oglądaniu.
Dla me-tv przy skanowaniu.
A tak na marginesie - u mnie jest tak
Kod:
[ 11.984099] usb 2-1.1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135 [ 11.984541] usb 2-1.1: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in cold state [ 12.037347] usb 2-1.1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw' [ 12.136863] usb 2-1.1: dvb_usb_af9035: firmware version=3.40.1.0 [ 12.136881] usb 2-1.1: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state [ 12.138363] usb 2-1.1: dvb_usb_af9035: [0] overriding tuner from 00 to 60 [ 12.139895] usb 2-1.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 12.139939] DVB: registering new adapter (ITE 9135(9006) Generic) [ 12.168330] af9033 9-0038: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0 [ 12.168338] af9033 9-0038: Afatech AF9033 successfully attached [ 12.168354] usb 2-1.1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))... [ 12.208741] it913x 9-001c: ITE IT913X BX successfully attached [ 12.255985] Registered IR keymap rc-it913x-v1 [ 12.256167] input: ITE 9135(9006) Generic as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/rc/rc0/input20 [ 12.256284] rc0: ITE 9135(9006) Generic as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/rc/rc0 [ 12.256292] usb 2-1.1: dvb_usb_v2: 'ITE 9135(9006) Generic' successfully initialized and connected [ 12.256358] usbcore: registered new interface driver dvb_usb_af9035
@patria zainstaluj firmware.
http://forum.linuxmint.pl/index.php?PHPSESSID=5lb3etoe44m3v8u36grbptas34&topic=4984.msg40011#msg40011
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#11 2015-11-20 09:10:16
neo86 - Lubię marudzić
- neo86
- Lubię marudzić
- Skąd: California
- Zarejestrowany: 2014-06-29
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
[quote=ilin]Dla tych programów listę kanałów generuje się za pomocą wscan.
Następnie dla vlc podaje się plik z listą jako argument przy oglądaniu.
Dla me-tv przy skanowaniu.[/quote]
Dokładnie tak robiłem jak mówisz. Używałem wscan (VLC tego wymagał). Me-TV ma swój mechanizm wyszukiwania. I nic z tym tunerem oba programy nie znalazły. Tylko Kaffeine w pełni współpracuje z tym dziwnym tunerem.
Ty widzę masz nowszą wersję tego chipa:
Kod:
[ 12.256292] usb 2-1.1: dvb_usb_v2: 'ITE 9135(9006) Generic'
Czyli it9135 v.2 a ja mam it9135 v.1 to też jest różnica. może dlatego u mnie tylko z jednym programem współpracuje a z innymi nie.
Ostatnio edytowany przez neo86 (2015-11-20 09:18:04)
Offline
#12 2015-11-20 12:26:09
patria - Użytkownik
- patria
- Użytkownik
- Zarejestrowany: 2013-05-28
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
Dziękuję wszystkim za pomoc.
Po zainstalowaniu firmware it9135-01.fw tuner poprawnie się uruchamia.
Pzdr.
Offline
#13 2015-11-20 17:31:57
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
[quote=neo86]Dokładnie tak robiłem jak mówisz[/quote]
Czyli wscan nie znajdywał kanałów.Jak rozumiem.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#14 2015-11-20 17:40:48
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
[quote=neo86]Ty widzę masz nowszą wersję tego chipa:
Kod:
[ 12.256292] usb 2-1.1: dvb_usb_v2: 'ITE 9135(9006) Generic'
Czyli it9135 v.2 a ja mam it9135 v.1 to też jest różnica. może dlatego u mnie tylko z jednym programem współpracuje a z innymi nie.[/quote]
Ty widzę, nie bardzo wiesz o czym piszesz.
[tt]dvb_usb_v2[/tt] to nazwa modułu obsługującego tunery USB. W starszych wersjach jądra sterownik tunera korzystał z poprzedniej wersji tego modułu, czyli [tt]dvb_usb[/tt].
Nie ma to nic wspólnego z samym modelem tunera.
filename: /lib/modules/4.3.0-0.slh.1-aptosid-amd64/kernel/drivers/media/usb/dvb-usb-v2/dvb-usb-af9035.ko
[b]firmware: dvb-usb-it9303-01.fw
firmware: dvb-usb-it9135-02.fw
firmware: dvb-usb-it9135-01.fw
firmware: dvb-usb-af9035-02.fw[/b]
license: GPL
description: Afatech AF9035 driver
author: Antti Palosaari <crope@iki.fi>
srcversion: A81BCBEB8D42AD66DDCF8B1
alias: usb:v048Dp9306d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2013p0262d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2013p025Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2040pF900d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0413p6A05d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0CCDp0099d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1B80pE410d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1B80pE411d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1B80pE409d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CAp0335d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CAp4835d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CAp3835d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CAp2835d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CAp1835d*dc*dsc*dp*ic*isc*ip*in*
[b]alias: usb:v048Dp9006d*dc*dsc*dp*ic*isc*ip*in*[/b]
alias: usb:v048Dp9005d*dc*dsc*dp*ic*isc*ip*in*
[b]alias: usb:v048Dp9135d*dc*dsc*dp*ic*isc*ip*in*[/b]
alias: usb:v07CAp0337d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0CCDp00AAd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B05p1779d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CAp0825d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CApA867d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CAp1867d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CApB835d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CApA835d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0CCDp0093d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p1003d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p1002d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p1001d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p1000d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p9035d*dc*dsc*dp*ic*isc*ip*in*
depends: i2c-core,[b]dvb_usb_v2[/b],usbcore,rc-core
intree: Y
vermagic: 4.3.0-0.slh.1-aptosid-amd64 SMP preempt mod_unload modversions
parm: adapter_nr:DVB adapter numbers (array of short)[/quote]
@ilin: Na początku jest podane:Kod:
Bus 001 Device 006: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick
Offline
#15 2015-11-20 17:53:41
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
I jest pytanie, która to wersja.
Dla każdej jest inny firmware.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#16 2015-11-20 17:58:47
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
Wytłumaczenie początkowego problemu jest banalne.
Po wyłączeniu Windowsa chip tunera był ciągle aktywny (wraz z załadowanym firmware) podczas uruchamiania Linuksa.
[ 7.690465] usb 2-1: dvb_usb_v2: found a 'ITE 9135 Generic' [b]in warm state[/b][/quote]
po niezależnym włączeniu chip nie startował z powodu braku firmware:[ 7.849589] usb 6-1: dvb_usb_v2: found a 'ITE 9135 Generic' [b]in cold state[/b]
[ 7.849607] usb 6-1: [b]firmware: failed to load dvb-usb-it9135-02.fw (-2)[/b]
[ 7.849654] usb 6-1: [b]Direct firmware load failed with error -2[/b]
[ 7.849656] usb 6-1: Falling back to user helper
[ 7.850291] usb 6-1: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-02.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -12
[ 7.850385] dvb_usb_af9035: probe of 6-1:1.0 failed with error -12[/quote]Offline
#17 2015-11-20 18:00:57
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
Czyli prawidłowym firmware jest dvb-usb-it9135-02.fw
Czyli nowa wersja karty.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#18 2015-11-20 18:05:41
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
[quote=ilin]Czyli prawidłowym firmware jest dvb-usb-it9135-02.fw
Czyli nowa wersja karty.[/quote]
Nie ma wątpliwości:
[quote=patria][ 7.849218] usb 6-1: dvb_usb_af9035: prechip_version=83 [b]chip_version=02[/b] chip_type=9135[/quote]
Offline
#19 2015-11-20 19:42:13
neo86 - Lubię marudzić
- neo86
- Lubię marudzić
- Skąd: California
- Zarejestrowany: 2014-06-29
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
[quote=ilin][quote=neo86]Dokładnie tak robiłem jak mówisz[/quote]
Czyli wscan nie znajdywał kanałów.Jak rozumiem.[/quote]
Dokładnie wscan nie widział żadnego kanału. Kierowałem się radami z http://forum.emitel.pl/viewtopic.php?t=2725&start=200 używając tej rady:
w_scan -c PL -L -E 0 -t 3 -F >> lista.xspf
Pownno pomóc przy wykryciu mux1, -E 0 pomija programy kodowane, -t 3 włącza skanowanie dokładne co pomaga przy słabszym sygnale, -F wydłuża czas oczekiwania na odpowiedź tunera.[/quote]
ale nic nie znalazło.
Włączyłem Kaffeine który na automacie sam znalazł prawie wszystkie kanały (35 z 40 możliwych). W kablówce mam National Geographic oraz TV4 (telewizor stary analogowy te kanały widzi a tunera chciałem użyć dla wyższej jakości bez drobnego śnieżenia) i tego mi nie znajduje nie wiem czemu a na tych kanałach by mi zależało najbardziej (szczególnie na NG). Próbowałem ostatnio z użyciem zasilacza DVB na kablu antenowym ale też nic nie daje. Widocznie tuner chińczyk tego nie daje rady ogarnąć. W sumie tak samo jest z dekoderem pod TV też tych kanałów nie znajduje (też jakiś chińczyk bo zależało mi na takim co posiada Smart TV na bazie Androida).Ostatnio edytowany przez neo86 (2015-11-20 19:46:23)
Offline
#20 2015-11-20 19:48:45
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"
https://forum.dug.net.pl/viewtopic.php?pid=165423#p165423
Pokaż nam to wszystko.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00010 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00118 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.191.27.78' WHERE u.id=1 |
| 0.00069 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.191.27.78', 1732548409) |
| 0.00036 | SELECT * FROM punbb_online WHERE logged<1732548109 |
| 0.00052 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=27913 AND t.moved_to IS NULL |
| 0.00006 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00473 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=27913 ORDER BY p.id LIMIT 0,25 |
| 0.00097 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=27913 |
| Total query time: 0.00865 s | |