Forum Debian Users Gang

# usermod -a -G bumblebee nazwa_użytkownika

$ optirun nazwa_programu

# modprobe -r nouveau
# modprobe -r vga_switcheroo

deb http://ftp.debian.org/debian/ stretch main contrib non-free

# apt-get install gcc make linux-headers-amd64
# apt-get install dkms bbswitch-dkms

# modprobe bbswitch load_state=0

cat /proc/acpi/bbswitch

lspci -v | grep  -i ‘vga’ | grep -i ‘nvidia’

# echo "blacklist nouveau" >> /etc/modprobe.d/nouveau-blacklist.conf

# apt-get install nvidia-kernel-dkms nvidia-xconfig nvidia-settings
# apt-get install nvidia-vdpau-driver vdpau-va-driver mesa-utils
# apt-get install bumblebee-nvidia

# dpkg -i paczka_którą_pobrałeś.deb

# usermod -aG bumblebee NAZWA_UŻYTKOWNIKA

# service bumblebeed restart

$ optirun -vv glxgears

milik@irin:~$ optirun -vv glxgears
[   92.197193] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[   92.197501] [DEBUG]optirun version 3.2.1 starting...
[   92.197508] [DEBUG]Active configuration:
[   92.197510] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[   92.197513] [DEBUG] X display: :8
[   92.197515] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[   92.197517] [DEBUG] Socket path: /var/run/bumblebee.socket
[   92.197520] [DEBUG] Accel/display bridge: auto
[   92.197522] [DEBUG] VGL Compression: proxy
[   92.197524] [DEBUG] VGLrun extra options: 
[   92.197526] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[   92.197793] [DEBUG]Using auto-detected bridge virtualgl
[   92.248579] [INFO]Response: No - error: Could not load GPU driver

[   92.248596] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[   92.248604] [DEBUG]Socket closed.
[   92.248620] [ERROR]Aborting because fallback start is disabled.
[   92.248627] [DEBUG]Killing all remaining processes.
milik@irin:~$

root@irin:/home/milik#  modprobe nvidia
root@irin:/home/milik# cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

root@irin:/home/milik#

milik@irin:~$ optirun -vv glxgears
[   40.873624] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[   40.873851] [INFO]Configured driver: nvidia
[   40.873950] [DEBUG]optirun version 3.2.1 starting...
[   40.873955] [DEBUG]Active configuration:
[   40.873957] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[   40.873959] [DEBUG] X display: :8
[   40.873961] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[   40.873969] [DEBUG] Socket path: /var/run/bumblebee.socket
[   40.873973] [DEBUG] Accel/display bridge: auto
[   40.873977] [DEBUG] VGL Compression: proxy
[   40.873980] [DEBUG] VGLrun extra options: 
[   40.873986] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[   40.874245] [DEBUG]Using auto-detected bridge virtualgl
[   40.924828] [INFO]Response: No - error: Could not load GPU driver

[   40.924842] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[   40.924846] [DEBUG]Socket closed.
[   40.924859] [ERROR]Aborting because fallback start is disabled.
[   40.924868] [DEBUG]Killing all remaining processes.
milik@irin:~$

root@irin:/home/milik# lshw -c display
  *-display               
       description: VGA compatible controller
       product: Broadwell-U Integrated Graphics
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 09
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:51 memory:c2000000-c2ffffff memory:d0000000-dfffffff ioport:5000(size=64) memory:c0000-dffff
  *-display UNCLAIMED
       description: 3D controller
       product: NVIDIA Corporation
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:04:00.0
       version: a2
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: latency=0
       resources: memory:c3000000-c3ffffff memory:b0000000-bfffffff memory:c0000000-c1ffffff ioport:3000(size=128)
root@irin:/home/milik#

milik@irin:~$ cat /etc/debian_version
8.6
milik@irin:~$

root@irin:/home/milik# lspci | grep NVIDIA
04:00.0 3D controller: NVIDIA Corporation Device 1347 (rev a2)
root@irin:/home/milik# cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"
    BusID "PCI:04:00:0"
#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
#   BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection
root@irin:/home/milik#

milik@irin:~$ optirun -vv glxgears
[   56.305241] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[   56.305463] [INFO]Configured driver: nvidia
[   56.305667] [DEBUG]optirun version 3.2.1 starting...
[   56.305687] [DEBUG]Active configuration:
[   56.305690] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[   56.305692] [DEBUG] X display: :8
[   56.305694] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[   56.305697] [DEBUG] Socket path: /var/run/bumblebee.socket
[   56.305699] [DEBUG] Accel/display bridge: auto
[   56.305702] [DEBUG] VGL Compression: proxy
[   56.305705] [DEBUG] VGLrun extra options: 
[   56.305707] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[   56.306084] [DEBUG]Using auto-detected bridge virtualgl
[   56.356809] [INFO]Response: No - error: Could not load GPU driver

[   56.356826] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[   56.356832] [DEBUG]Socket closed.
[   56.356846] [ERROR]Aborting because fallback start is disabled.
[   56.356858] [DEBUG]Killing all remaining processes.
milik@irin:~$

Pobieranie: 20 http://ftp.pl.debian.org testing/contrib amd64 Packages [54,3 kB]
Pobrano 13,4 MB w 6s (2223 kB/s)                                                
                             
Bieżący status: 1169 aktualizacji [+1169], 16000 nowych [+15968].
Uzupełnianie niespełnionych zależności...    
otwarte: 936068; zamknięte: 612406; odroczone: 25; konflikty: 75              oNie udało się rozwiązać problemów z zależnościami tej aktualizacji, ponieważ przekroczono limit czasu.
  Można rozwiązać ten problem zwiększając
  Aptitude::ProblemResolver::StepLimit (obecnie 500000).
Nie można bezpiecznie rozwiązać problemów z zależnościami, proszę spróbować uruchomić z opcją --full-resolver
root@irin:/home/milik#

milik@irin:~$ optirun -vv glxgears
[  187.935893] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf

milik@irin:~$ optirun smplayer
^C[  414.677002] [WARN]Received Interrupt signal.
[  414.677059] [WARN]Could not read data! Error: Bad file descriptor
[  414.677068] [ERROR]Failed to retrieve LibraryPath setting.
milik@irin:~$

pcie_port_pm=off

milik@irin:~$ optirun -vv glxgears
[   66.654989] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[   66.655678] [DEBUG]optirun version 3.2.1 starting...
[   66.655697] [DEBUG]Active configuration:
[   66.655702] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[   66.655708] [DEBUG] X display: :8
[   66.655712] [DEBUG] LD_LIBRARY_PATH: 
[   66.655718] [DEBUG] Socket path: /var/run/bumblebee.socket
[   66.655723] [DEBUG] Accel/display bridge: auto
[   66.655732] [DEBUG] VGL Compression: proxy
[   66.655746] [DEBUG] VGLrun extra options: 
[   66.655755] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[   66.655808] [DEBUG]Using auto-detected bridge virtualgl
[   66.849556] [INFO]Response: No - error: [XORG] (EE) Unknown chipset: NV118

[   66.849574] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Unknown chipset: NV118

[   66.849580] [DEBUG]Socket closed.
[   66.849595] [ERROR]Aborting because fallback start is disabled.
[   66.849601] [DEBUG]Killing all remaining processes.
milik@irin:~$