Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
- Forum Debian Users Gang
- » Środowiska graficzne
- » mysz działa w oknie programu ale nie na belce i gnome-shell
#1 2017-09-23 09:50:22
perestoo - Użytkownik
- perestoo
- Użytkownik
- Zarejestrowany: 2015-04-13
mysz działa w oknie programu ale nie na belce i gnome-shell
Witam, po aktualizacji do Debian 9 moja mysz działa w oknie programu ale na belce okna i na górnym pasku gnome-shell nie ma reakcji, co ciekawe hot-corner działa minimalizuje otwarte okna niestety choć mogę ruszać myszą żadna funkcja w tym trybie nie działa, sam gnome-shell chyba działa bo z klawiatury idzie się przełączać, otwierać i zamykać okna itd
wyłączyłem już wszystkie gnome-shell-extension a także brutalnie przez purge odinstalowałem i zainstalowałem z powrotem gnome-shell i gdm3 - bez zmian,
może to wina sterowników nvidia ale boje się sam przy tym grzebać
wynik komendy
Kod:
cat /var/log/Xorg.0.log
Kod:
[ 12.491] (--) Log file renamed from "/var/log/Xorg.pid-1070.log" to "/var/log/Xorg.0.log"
[ 12.493]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 12.493] X Protocol Version 11, Revision 0
[ 12.493] Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
[ 12.493] Current Operating System: Linux debian-prs 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19) x86_64
[ 12.493] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=8a96fcab-0931-4bf4-95f6-5367ec89afca ro quiet
[ 12.493] Build Date: 07 July 2017 06:14:06AM
[ 12.493] xorg-server 2:1.19.2-1+deb9u1 (https://www.debian.org/support)
[ 12.493] Current version of pixman: 0.34.0
[ 12.493] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.493] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.493] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 23 08:43:08 2017
[ 12.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.496] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.499] (==) No Layout section. Using the first Screen section.
[ 12.499] (==) No screen section available. Using defaults.
[ 12.499] (**) |-->Screen "Default Screen Section" (0)
[ 12.499] (**) | |-->Monitor "<default monitor>"
[ 12.500] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12.500] (**) | |-->Device "My GPU"
[ 12.500] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.500] (==) Automatically adding devices
[ 12.500] (==) Automatically enabling devices
[ 12.500] (==) Automatically adding GPU devices
[ 12.500] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 12.503] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 12.503] Entry deleted from font path.
[ 12.508] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 12.508] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.508] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.508] (II) Loader magic: 0x55b858cdee00
[ 12.508] (II) Module ABI versions:
[ 12.508] X.Org ANSI C Emulation: 0.4
[ 12.508] X.Org Video Driver: 23.0
[ 12.508] X.Org XInput driver : 24.1
[ 12.508] X.Org Server Extension : 10.0
[ 12.509] (++) using VT number 1
[ 12.512] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 12.512] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.513] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 12.515] (--) PCI:*(0:1:0:0) 10de:11c6:1462:8a96 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/134217728, 0xdc000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/131072
[ 12.516] (II) LoadModule: "glx"
[ 12.520] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 12.596] (II) Module glx: vendor="NVIDIA Corporation"
[ 12.596] compiled for 4.0.2, module version = 1.0.0
[ 12.596] Module class: X.Org Server Extension
[ 12.596] (II) NVIDIA GLX Module 304.135 Tue Jan 17 15:46:50 PST 2017
[ 12.596] (II) LoadModule: "nvidia"
[ 12.597] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12.611] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12.611] compiled for 4.0.2, module version = 1.0.0
[ 12.611] Module class: X.Org Video Driver
[ 12.615] (II) NVIDIA dlloader X Driver 304.135 Tue Jan 17 15:28:00 PST 2017
[ 12.615] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12.616] (II) Loading sub module "fb"
[ 12.616] (II) LoadModule: "fb"
[ 12.619] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.621] (II) Module fb: vendor="X.Org Foundation"
[ 12.621] compiled for 1.19.2, module version = 1.0.0
[ 12.621] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.621] (II) Loading sub module "wfb"
[ 12.621] (II) LoadModule: "wfb"
[ 12.621] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 12.623] (II) Module wfb: vendor="X.Org Foundation"
[ 12.623] compiled for 1.19.2, module version = 1.0.0
[ 12.623] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.623] (II) Loading sub module "ramdac"
[ 12.623] (II) LoadModule: "ramdac"
[ 12.623] (II) Module "ramdac" already built-in
[ 12.626] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.626] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 12.626] (==) NVIDIA(0): RGB weight 888
[ 12.626] (==) NVIDIA(0): Default visual is TrueColor
[ 12.626] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.626] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.301] (II) NVIDIA(GPU-0): Display (SAMSUNG LCD (CRT-0)) does not support NVIDIA 3D
[ 13.301] (II) NVIDIA(GPU-0): Vision stereo.
[ 13.303] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 650 Ti (GK106) at PCI:1:0:0 (GPU-0)
[ 13.303] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 13.303] (--) NVIDIA(0): VideoBIOS: 80.06.3c.00.11
[ 13.303] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 13.303] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 13.307] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 650 Ti at PCI:1:0:0
[ 13.307] (--) NVIDIA(0): SAMSUNG LCD (CRT-0) (connected)
[ 13.307] (--) NVIDIA(0): DFP-0
[ 13.307] (--) NVIDIA(0): DFP-1
[ 13.307] (--) NVIDIA(0): DFP-2
[ 13.307] (--) NVIDIA(0): SAMSUNG LCD (CRT-0): 480.0 MHz maximum pixel clock
[ 13.307] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 13.307] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 13.307] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 13.307] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 13.307] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[ 13.307] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 13.307] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13.307] (**) NVIDIA(0): device SAMSUNG LCD (CRT-0) (Using EDID frequencies has
[ 13.307] (**) NVIDIA(0): been enabled on all display devices.)
[ 13.309] (==) NVIDIA(0):
[ 13.309] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 13.309] (==) NVIDIA(0): will be used as the requested mode.
[ 13.309] (==) NVIDIA(0):
[ 13.309] (II) NVIDIA(0): Validated MetaModes:
[ 13.309] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 13.309] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 13.331] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 13.331] (--) NVIDIA(0): option
[ 13.331] (--) Depth 24 pixmap format is 32 bpp
[ 13.331] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 13.331] (II) NVIDIA: access.
[ 13.336] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 13.403] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 13.403] (==) NVIDIA(0): Backing store enabled
[ 13.403] (==) NVIDIA(0): Silken mouse enabled
[ 13.405] (==) NVIDIA(0): DPMS enabled
[ 13.406] (II) Loading sub module "dri2"
[ 13.406] (II) LoadModule: "dri2"
[ 13.406] (II) Module "dri2" already built-in
[ 13.406] (II) NVIDIA(0): [DRI2] Setup complete
[ 13.406] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 13.407] (--) RandR disabled
[ 13.411] (II) SELinux: Disabled on system
[ 13.412] (II) Initializing extension GLX
[ 13.413] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 13.514] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.514] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.514] (II) LoadModule: "libinput"
[ 13.515] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 13.518] (II) Module libinput: vendor="X.Org Foundation"
[ 13.518] compiled for 1.19.0, module version = 0.23.0
[ 13.518] Module class: X.Org XInput Driver
[ 13.518] ABI class: X.Org XInput driver, version 24.1
[ 13.518] (II) Using input driver 'libinput' for 'Power Button'
[ 13.519] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 38 paused 0
[ 13.519] (**) Power Button: always reports core events
[ 13.519] (**) Option "Device" "/dev/input/event3"
[ 13.520] (**) Option "_source" "server/udev"
[ 13.520] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 13.520] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 13.521] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 13.521] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.521] (**) Option "xkb_model" "pc105"
[ 13.521] (**) Option "xkb_layout" "pl"
[ 13.553] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 13.553] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 13.554] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.554] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.554] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.554] (II) Using input driver 'libinput' for 'Power Button'
[ 13.555] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 41 paused 0
[ 13.555] (**) Power Button: always reports core events
[ 13.555] (**) Option "Device" "/dev/input/event2"
[ 13.555] (**) Option "_source" "server/udev"
[ 13.556] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 13.556] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 13.556] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 13.556] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 13.556] (**) Option "xkb_model" "pc105"
[ 13.556] (**) Option "xkb_layout" "pl"
[ 13.557] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 13.557] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 13.558] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 13.558] (II) No input driver specified, ignoring this device.
[ 13.558] (II) This device may have been added with another device file.
[ 13.558] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 13.558] (II) No input driver specified, ignoring this device.
[ 13.558] (II) This device may have been added with another device file.
[ 13.559] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)
[ 13.559] (II) No input driver specified, ignoring this device.
[ 13.559] (II) This device may have been added with another device file.
[ 13.560] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event11)
[ 13.560] (II) No input driver specified, ignoring this device.
[ 13.560] (II) This device may have been added with another device file.
[ 13.560] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 13.561] (II) No input driver specified, ignoring this device.
[ 13.561] (II) This device may have been added with another device file.
[ 13.561] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)
[ 13.561] (II) No input driver specified, ignoring this device.
[ 13.561] (II) This device may have been added with another device file.
[ 13.562] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 13.562] (II) No input driver specified, ignoring this device.
[ 13.562] (II) This device may have been added with another device file.
[ 13.562] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event8)
[ 13.563] (II) No input driver specified, ignoring this device.
[ 13.563] (II) This device may have been added with another device file.
[ 13.563] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event9)
[ 13.563] (II) No input driver specified, ignoring this device.
[ 13.563] (II) This device may have been added with another device file.
[ 13.564] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 13.564] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 13.564] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 13.564] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 13.624] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 42 paused 0
[ 13.624] (**) Logitech USB Optical Mouse: always reports core events
[ 13.624] (**) Option "Device" "/dev/input/event1"
[ 13.624] (**) Option "_source" "server/udev"
[ 13.625] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 13.625] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 13.625] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/0003:046D:C058.0001/input/input1/event1"
[ 13.625] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 13.625] (**) Option "AccelerationScheme" "none"
[ 13.625] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 13.625] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 13.625] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 13.626] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 13.626] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 13.627] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 13.627] (II) No input driver specified, ignoring this device.
[ 13.627] (II) This device may have been added with another device file.
[ 13.628] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.628] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.628] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 13.628] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 13.629] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 43 paused 0
[ 13.629] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.629] (**) Option "Device" "/dev/input/event0"
[ 13.629] (**) Option "_source" "server/udev"
[ 13.630] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 13.630] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 13.630] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13.630] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 13.630] (**) Option "xkb_model" "pc105"
[ 13.630] (**) Option "xkb_layout" "pl"
[ 13.631] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 13.631] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 13.631] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 13.632] (II) No input driver specified, ignoring this device.
[ 13.632] (II) This device may have been added with another device file.
[ 14.097] (II) NVIDIA(GPU-0): Display (SAMSUNG LCD (CRT-0)) does not support NVIDIA 3D
[ 14.097] (II) NVIDIA(GPU-0): Vision stereo.
[ 14.097] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.097] (**) NVIDIA(0): device SAMSUNG LCD (CRT-0) (Using EDID frequencies has
[ 14.097] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.637] (II) NVIDIA(GPU-0): Display (SAMSUNG LCD (CRT-0)) does not support NVIDIA 3D
[ 18.637] (II) NVIDIA(GPU-0): Vision stereo.
[ 18.637] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.637] (**) NVIDIA(0): device SAMSUNG LCD (CRT-0) (Using EDID frequencies has
[ 18.637] (**) NVIDIA(0): been enabled on all display devices.)
[ 25.050] (**) Option "fd" "38"
[ 25.050] (**) Option "fd" "41"
[ 25.050] (**) Option "fd" "42"
[ 25.050] (**) Option "fd" "43"
[ 25.315] (II) systemd-logind: got pause for 13:67
[ 25.316] (II) systemd-logind: got pause for 226:0
[ 25.316] (II) systemd-logind: got pause for 13:65
[ 25.317] (II) systemd-logind: got pause for 13:66
[ 25.317] (II) systemd-logind: got pause for 13:64Ostatnio edytowany przez perestoo (2017-09-23 09:50:37)
Offline
#2 2017-09-23 11:15:20
qba1707 - 
Użytkownik
- qba1707
- Użytkownik
- Zarejestrowany: 2011-08-16
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
Podejrzewam, ze tu jest pies pogrzebany - 27] (II) No input driver specified, ignoring this device. Jaka dokladnie to jest mysz?
Offline
#3 2017-09-23 11:46:18
perestoo - Użytkownik
- perestoo
- Użytkownik
- Zarejestrowany: 2015-04-13
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
Mysz to Logitech B105 zwykła optyczna na USB, podłączyłem też Microsoft Wireless Mouse 1000 zrebootowałem system i działała tak samo.
Offline
#4 2017-09-23 11:59:40
qba1707 - Użytkownik
- qba1707
- Użytkownik
- Zarejestrowany: 2011-08-16
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
zainstaluj bumblebee
Offline
#5 2017-09-23 12:18:12
perestoo - Użytkownik
- perestoo
- Użytkownik
- Zarejestrowany: 2015-04-13
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
wyskoczyło
Kod:
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169
Offline
#6 2017-09-23 12:26:18
qba1707 - Użytkownik
- qba1707
- Użytkownik
- Zarejestrowany: 2011-08-16
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
to teraz firmware-realtek
Ostatnio edytowany przez qba1707 (2017-09-23 12:26:51)
Offline
#7 2017-09-23 12:55:38
urbinek - Użytkownik
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
ihmo myszka działa i to nie jest problem
Kod:
13.564] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 13.564] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 13.564] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse' [ 13.624] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 42 paused 0 [ 13.624] (**) Logitech USB Optical Mouse: always reports core events [ 13.624] (**) Option "Device" "/dev/input/event1" [ 13.624] (**) Option "_source" "server/udev" [ 13.625] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse [ 13.625] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is a pointer caps [ 13.625] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/0003:046D:C058.0001/input/input1/event1" [ 13.625] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8) [ 13.625] (**) Option "AccelerationScheme" "none" [ 13.625] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 [ 13.625] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 13.625] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 13.626] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse [ 13.626] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is a pointer caps [ 13.627] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
Trochę głupie - ale zainstaluj najnowsze sterowniki do grafiki
A w wolnym czasie, robię noże :)
[img]http://nginx.urbinek.eu/_photos/signature.png[/img]
Offline
#8 2017-09-23 13:30:24
perestoo - Użytkownik
- perestoo
- Użytkownik
- Zarejestrowany: 2015-04-13
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
dzięki, spróbuję najnowsze stery bo po zainstalowaniu bumblebee nawet ekran logowania nie chciał się włączyć
Offline
#9 2017-09-23 13:40:41
perestoo - Użytkownik
- perestoo
- Użytkownik
- Zarejestrowany: 2015-04-13
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
OK jedno wiem po odinstalowaniu zamkniętych sterowników nvidia wszystko działa prawidłowo,
pobawię się jeszcze z najnowszymi a wszystkim dziękuję za pomoc
Offline
#10 2017-09-23 17:45:18
wikingagressor - Użytkownik
- wikingagressor
- Użytkownik
- Skąd: Józefów k.Błonia, mazowieck
- Zarejestrowany: 2015-02-03
Re: mysz działa w oknie programu ale nie na belce i gnome-shell
Przede wszystkim zainstaluj paczke [b]nvidia-detect[/b] i ja uruchom. Ona ci powie jakie sterowniki masz zainstalowac jak bedziesz chcial miec binarne od nvidii. Mozesz tez pozostac na otwarto-zrodlowych.
Peace, Love and Debian for the World!!!
Offline
Strony: 1
- Forum Debian Users Gang
- » Środowiska graficzne
- » mysz działa w oknie programu ale nie na belce i gnome-shell
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00015 | SET CHARSET latin2 |
| 0.00007 | SET NAMES latin2 |
| 0.00071 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.117.141.69' WHERE u.id=1 |
| 0.00137 | UPDATE punbb_online SET logged=1732430024 WHERE ident='18.117.141.69' |
| 0.00041 | SELECT * FROM punbb_online WHERE logged<1732429724 |
| 0.00041 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=29924 AND t.moved_to IS NULL |
| 0.00049 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00738 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=29924 ORDER BY p.id LIMIT 0,25 |
| 0.00488 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=29924 |
| Total query time: 0.01587 s | |