Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
- Forum Debian Users Gang
- » Środowiska graficzne
- » Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
#1 2007-03-15 11:15:31
korbol - 
Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Jeśli komuś działa akceleracja na radeonie to proszę o wklejenie swojego xorg.conf.
Zauważyłem że aticonfig --initial dodaje swoje 3 grosze do tego pliku ale nei kasuje z niego informacji starych i mam zarówno ati jak i fglrx. Wszystko po 2 razy razem z monitorem itd...
Pozdrawiam
Offline
#2 2007-03-15 11:36:02
AlexZar - Użytkownik
- AlexZar
- Użytkownik
- Zarejestrowany: 2007-03-07
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Jakiś czas temu miałem ati i zachwałem działający konfig ,ale nie wiem jak bedzie działał z nowymi sterami. Mam nadzieje że się na coś przyda.
Kod:
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "pl"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 30-85
VertRefresh 50-160
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
Section "Monitor"
Identifier "Monitor1"
HorizSync 31.5
VertRefresh 50 - 70
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "clone"
Option "HSync2" "31.5 "
Option "VRefresh2" "50 - 70"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "TVFormat" "PAL-D"
Option "TVStandard" "VIDEO"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:2:0:0" # vendor=1002, device=4150
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Pozdrawiam
AMD64 3000+
Abit A8N-E
GeForce 7600GT
Offline
#3 2007-03-15 11:59:51
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Dziex ale Twoj chyba odbiega od teraźniejszej normy :]
Teraz wyglada zupełnie inaczej więc poczekam na następny :]
Pozdrawiam
Offline
#4 2007-03-15 12:08:28
BialyS - Członek DUG
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Kod:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
Option "AIGLX" "off"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
Option "XkbOptions" "altwin:super_win"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
HorizSync 30.0 - 80.0
VertRefresh 60.0 - 75.0
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
## Option "TVStandard" "PAL-B"
# Option "TVFormat" "NTSC-M"
# Option "TVOverscan" "off"
# Option "OverlayOnCRTC2" "0"
Option "DesktopSetup" "clone mode"
## Option "MonitorLayout" "STV, CRT"
## Option "NoTV" "no"
## Option "DesktopSetup" "0x00000100"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
http://annabielawska.pl Biuro Rachunkowe | http://ranking.cebr.pl Największy w sieci ranking biur rachunkowych
Offline
#5 2007-03-15 12:41:02
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Dzieki, probowalem pare kombinacji ale bez rezultatu. U mnie wyglada to tak:
Kod:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "L1730P"
HorizSync 30.0 - 71.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV350 AS [Radeon 9550]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV350 AS [Radeon 9550]"
Monitor "L1730P"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSectionKod:
# lsmod Module Size Used by fglrx 395564 0
Ma ktoś jakiegoś pomysła?
Stery instalowalem wg tego FAQ http://dug.net.pl/faq/faq-7-185-Instalacja_sterownik%F3w_do_ATI_Radeon_z_repozytori%F3w_debiana.php
Pliki nagłówkowe jajca i xorg-dev mam zainstalowane.
Pozdrawiam
Offline
#6 2007-03-15 13:14:07
terefere - Członek DUG
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Spróbuj po prostu przeinstalować instalatorem ze strony ati jak nie pójdzie upewnij sie że masz w systemie pakiety dev xorga(nie doczytałem).
Mój konfig wyglada tak:
Kod:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "LS902U"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV350 AP [Radeon 9600]"
Driver "ati"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV350 AP [Radeon 9600]"
Monitor "LS902U"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Działa i chuczy w savaga fajnie sie pyka
Nigdy się niektórych rzeczy nie dowiesz, jeśli na niektóre pytania samemu sobie nie odpowiesz - STFW
Offline
#7 2007-03-15 13:15:47
Ryszard - Piwo DUG
- Ryszard
- Piwo DUG
- Skąd: Zadupia
- Zarejestrowany: 2006-06-30
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Driver "fglrx"
kurde miałem radka i zawsze miałem z nim Bubu w 3d wywaliłem go na Nvidie i swiety spokuj ati te stery wolne i zamkniete to jest chore ati jest do bani przedewszystkim do bańi pod linuxem i enter.Zawsze śie motałem z tym jebńięt.............. 3d Ati To SYF POWERED NVIDIA RULES
[url=http://img196.imageshack.us/i/freebsde.jpg/][img]http://img196.imageshack.us/img196/3770/freebsde.jpg[/img][/url]
Offline
#8 2007-03-15 13:23:24
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Niestety, to nic nie daje, nawet jak w jednej sekcji i drugiej naraz jest fglrx. Poza tym moduł fglrx się ładuje... ale co z tego... 8-|
Pozdrawiam
Offline
#9 2007-03-15 13:28:05
Ryszard - Piwo DUG
- Ryszard
- Piwo DUG
- Skąd: Zadupia
- Zarejestrowany: 2006-06-30
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Wiem walczyłem też z tym i ni huhu wydaje śię to kwestia tych sterów dlatego ati umnie po miesiacu poszła w alegro
[url=http://img196.imageshack.us/i/freebsde.jpg/][img]http://img196.imageshack.us/img196/3770/freebsde.jpg[/img][/url]
Offline
#10 2007-03-15 13:33:44
Kudzu - 1NF:rM@7iON1SP0vvErr
- Kudzu
- 1NF:rM@7iON1SP0vvErr
- Skąd: Universe
- Zarejestrowany: 2007-01-06
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
oto moj xorg.. posiadam ati radeon 9600 i smiga akceleracja jak burza:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV350 AP [Radeon 9600]"
Driver "fglrx"
BusID "PCI:2:0:0"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV350 AP [Radeon 9600]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
[/quote]
...software is like sex
it's better when it's free..
Offline
#11 2007-03-15 14:21:21
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Kodzik przeedytowałem pod Twoj config i tez kiszka akcelleracji nie ma :(
Pozdrawiam
Offline
#12 2007-03-15 16:02:28
Kudzu - 1NF:rM@7iON1SP0vvErr
- Kudzu
- 1NF:rM@7iON1SP0vvErr
- Skąd: Universe
- Zarejestrowany: 2007-01-06
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
zainstaluj wg [url=http://dug.net.pl/faq/faq-7-185-Instalacja_sterownik%F3w_do_ATI_Radeon_z_repozytori%F3w_debiana.php]tego[/url]
zrob wszystko poza aticonfig --initial itp
tylko dpkg-reconfigure xserver-xorg i wybierz fglrx reszte tak jak chce..
...software is like sex
it's better when it's free..
Offline
#13 2007-03-15 16:21:25
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Wg tego wlasnie robilem na kilka mozliwych sposobów z edytowaniem pliku xorg.conf recznie i zamianie "ati" na "fglrx" i lipa
Pozdrawiam
Offline
#14 2007-03-15 16:29:05
pablo - Członek DUG
#15 2007-03-15 16:38:50
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Wersja 8.28.8-4 (sid) a karta to radeon 9550.
Pozdrawiam
Offline
#16 2007-03-16 06:35:59
ju-rek - Użytkownik
- ju-rek
- Użytkownik
- Skąd: R.........
- Zarejestrowany: 2006-04-30
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Może to ci pomoże:
http://forum.dug.net.pl/viewtopic.php?t=5465&highlight=ati
C2Q Q9550@4,0 Ghz - Asus P5Q-E - Nvidia GTX 260 - 2x2gb OCZ Titanium 1150MHz - HDD 500 Gb - Audigy 2 Gold - 2.6.31-zen1
[img]http://img213.imageshack.us/img213/4497/userbar15788xl0.gif[/img]
Offline
#17 2007-03-16 10:03:14
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
No niestety, zalinkowanie pod wskazane miejsce nic nie dało :(
Pozdrawiam
Offline
#18 2007-03-16 14:16:38
ju-rek - Użytkownik
- ju-rek
- Użytkownik
- Skąd: R.........
- Zarejestrowany: 2006-04-30
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
O ile pamiętam to w lsmod przy fglrx powinno być 9 albo 8, a nie jak u ciebie :
Kod:
# lsmod Module Size Used by fglrx 395564 0
pokaż : [b]lsmod | grep agp[/b] i [b] lsmod | grep fglrx[/b]
C2Q Q9550@4,0 Ghz - Asus P5Q-E - Nvidia GTX 260 - 2x2gb OCZ Titanium 1150MHz - HDD 500 Gb - Audigy 2 Gold - 2.6.31-zen1
[img]http://img213.imageshack.us/img213/4497/userbar15788xl0.gif[/img]
Offline
#19 2007-03-16 18:42:44
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Dokładnie, powinno byc chyba 8 bo kiedys jakims cudem na poprzednim systemie udało mi sie za jakimś restartem uzyskać akceleracje (i było chyba 8) lecz była ona tylko do kolejngeo restaru :-/
O to wyniki komend:
Kod:
$ lsmod | grep agp amd64_agp 12036 0 agpgart 29360 2 fglrx,amd64_agp
Kod:
$ lsmod | grep fglrx fglrx 395564 0 agpgart 29360 2 fglrx,amd64_agp
Pozdrawiam
Offline
#20 2007-03-16 23:50:29
ju-rek - Użytkownik
- ju-rek
- Użytkownik
- Skąd: R.........
- Zarejestrowany: 2006-04-30
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Nie mam 64bit ale u kumpla jest tak:
Kod:
lsmod | grep agp ali_agp 4832 0 amd64_agp 8964 1 agpgart 19092 3 fglrx,ali_agp,amd64_agp
Kod:
lsmod | grep fglrx fglrx 432912 9 agpgart 19092 3 fglrx,ali_agp,amd64_agp
więc brakuje ci chyba modułu agp płyty, chyba powinno go ładowac przed załadowaniem [b]amd64_agp[/b]
C2Q Q9550@4,0 Ghz - Asus P5Q-E - Nvidia GTX 260 - 2x2gb OCZ Titanium 1150MHz - HDD 500 Gb - Audigy 2 Gold - 2.6.31-zen1
[img]http://img213.imageshack.us/img213/4497/userbar15788xl0.gif[/img]
Offline
#21 2007-03-17 09:39:17
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Moj system to i386. Proc jest 64bitowy.
Moja plyta to Asus K8N-E i nie mam pojecia jaki to moduł i dlaczego się nie łąduje.
Chipset to nforce3 wiec moze ten moduł nvidia_agp (do czegokolwiek on służy)
Pozdrawiam
Offline
#22 2007-03-17 10:02:02
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Doprowadzilem juz do takiej sytuacji
Kod:
$ lsmod | grep agp nvidia_agp 8092 0 amd64_agp 12036 0 agpgart 29360 3 fglrx,nvidia_agp,amd64_agp
Kod:
$ lsmod | grep fglrx fglrx 395564 0 agpgart 29360 3 fglrx,nvidia_agp,amd64_agp
ale dalej cos nie bangla z amd64_agp
Pozdrawiam
Offline
#23 2007-03-17 11:13:33
Quaroll - Użytkownik
- Quaroll
- Użytkownik
- Skąd: Warszawa
- Zarejestrowany: 2005-12-26
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Ja mam radka 9700 PRO i fglrx działa bez problemoo. Co prawda dziwi mnie jak ati mogło zrobić sterowniki bez obsługi pivota - jakaś lipa potworna, bo nvidia to robi odkąd pamiętam.
Instalowałem według przepisu na DUG z repozytoriów.
A nie robiłeś apgrejdu z Sarge'a na Sid'a? Ja jak kiedyś upgradeowałem, to miałem straszny bałagan w systemie i przeróżne funkcje nie wiedzić czemu nie chciały chodzić. Pomogło dopiero wycięcie wszystkiego i ponowna instalacja.
Głupi nie wie, że jest głupi a mądry to wie...
Offline
#24 2007-03-17 11:40:20
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
System jest świeżo zainstalowany.
Pozdrawiam
Offline
#25 2007-03-17 12:10:52
korbol - Członek DUG
- korbol
- Członek DUG
- Zarejestrowany: 2005-04-29
Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
P starcie x-ów na konsoli nr1 (apropos jak zrzucić do pliku to co jets na konsoli nr1) widnieje:
Kod:
(WW) fglrx:No matching Device sction for instance (BusID PCI:1:0:1)found (EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV" (EE) fglrx(0): cannot init AGP (EE) AIGLX: Screen 0 is not DRI capable
Pozdrawiam
Offline
- Forum Debian Users Gang
- » Środowiska graficzne
- » Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00013 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00136 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.220.136.165' WHERE u.id=1 |
| 0.00108 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.220.136.165', 1714359400) |
| 0.00061 | SELECT * FROM punbb_online WHERE logged<1714359100 |
| 0.00241 | DELETE FROM punbb_online WHERE ident='85.208.96.202' |
| 0.00071 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=7209 AND t.moved_to IS NULL |
| 0.00009 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00358 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=7209 ORDER BY p.id LIMIT 0,25 |
| 0.00096 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=7209 |
| Total query time: 0.01097 s | |