Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2007-11-11 22:24:59

  Bober - Użytkownik

Bober
Użytkownik
Skąd: Gdynia
Zarejestrowany: 2006-10-12
Serwis

Beryl/compiz na ATI

Czesc!

Szukalem troche na googlach, zauwazylem ze nie tylko ja mam taki problem z Berylem na ATI. Otoz po wgraniu Beryla/compiza wszystko dziala slicznie przez okolo 1-2min. Niestety po tym czasie zaczynaja sie problemy z wyswietlaniem. Zamiast pasku zadań pojawia mi sie bialy pasek, zamiast okien mam biale kwadraty. Pewnie to jest problem konfiguracji lecz nie wiem co zmienic.

pomoze ktos? mam cos tu wkleic (np xorg)?.

Pozdrawiam

http://www.graal.boo.pl
http://www.graal.boo.pl/forum/

Offline

 

#2  2007-11-11 22:31:47

  MG_Peter - Członek DUG

MG_Peter
Członek DUG
Skąd: Gliwice
Zarejestrowany: 2005-07-29

Re: Beryl/compiz na ATI

Wklej xorg.conf
Podaj jaką konkretnie masz kartę. U mnie Compiz-Fusion działa na lapciaku na Ati x2300 na najnowszych sterach bez problemu (no może poza tym, że powinien działać szybciej - ale to już problem ATI)

Offline

 

#3  2007-11-11 23:08:52

  Bober - Użytkownik

Bober
Użytkownik
Skąd: Gdynia
Zarejestrowany: 2006-10-12
Serwis

Re: Beryl/compiz na ATI

Kod:

Section "ServerLayout"
    Identifier    "XFree86 Configured"
    Screen        0    "Screen0"    0    0
    InputDevice    "Keyboard0"        "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
    InputDevice    "USB Mouse"        "CorePointer"
# ALPS TouchPad not detected
    InputDevice    "Synaptics TouchPad"    "AlwaysCore"
EndSection

Section "ServerFlags"
    Option        "AllowMouseOpenFail"    "true"
    
EndSection

Section "Files"
    FontPath    "/usr/share/fonts/X11/misc"
    FontPath    "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath    "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath    "/usr/share/fonts/X11/100dpi"
    FontPath    "/usr/share/fonts/X11/75dpi"
    # path to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load        "ddc"        # ddc probing of monitor
    #Load        "GLcore"
    Load        "dbe"
    Load  "dri"
#    Load        "extmod"
    SubSection  "extmod"
      Option  "omit xfree86-dga"
    EndSubSection
    Load  "glx"
    Load        "bitmap"    # bitmap-fonts
    Load        "type1"
    Load        "freetype"
    Load        "record"
    Load        "synaptics"
EndSection

Section "InputDevice"
    Identifier    "Keyboard0"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"        "xorg"
    Option        "XkbOptions"        "altwin:super_win"
    Option        "XkbModel"        "pc105"
    Option        "XkbLayout"        "us"

EndSection

Section "InputDevice"
    Identifier    "Serial Mouse"
    Driver        "mouse"
    Option        "Protocol"        "Microsoft"
    Option        "Device"        "/dev/ttyS0"
    Option        "Emulate3Buttons"    "true"
    Option        "Emulate3Timeout"    "70"
    Option        "SendCoreEvents"    "true"
EndSection

Section "InputDevice"
    Identifier    "PS/2 Mouse"
    Driver        "mouse"
    Option        "Protocol"        "IMPS/2"
    Option        "ZAxisMapping"    "4 5"
    Option        "Device"        "/dev/psaux"
    Option        "Emulate3Buttons"    "true"
    Option        "Emulate3Timeout"    "70"
    Option        "SendCoreEvents"    "true"
EndSection

Section "InputDevice"
    Identifier    "USB Mouse"
    Driver        "mouse"
    Option        "Device"        "/dev/input/mice"
    Option        "SendCoreEvents"    "true"
    Option        "Protocol"        "IMPS/2"
    Option        "ZAxisMapping"        "4 5"
    Option        "Buttons"        "5"
EndSection

Section "InputDevice"
    Identifier    "ALPS TouchPad"
    Driver        "synaptics"
    Option        "Device"    "/dev/psaux"
    Option        "Protocol"        "auto-dev"
    Option        "LeftEdge"        "120"
    Option        "RightEdge"        "830"
    Option        "TopEdge"        "120"
    Option        "BottomEdge"        "650"
    Option        "FingerLow"        "14"
    Option        "FingerHigh"        "15"
    Option        "MaxTapTime"        "180"
    Option        "MaxTapMove"        "110"
    Option        "EmulateMidButtonTime"    "75"
    Option        "VertScrollDelta"    "20"
    Option        "HorizScrollDelta"    "20"
    Option        "MinSpeed"        "0.7"
    Option        "MaxSpeed"        "3"
    Option        "AccelFactor"        "0.025"
    Option        "EdgeMotionMinSpeed"    "15"
    Option        "EdgeMotionMaxSpeed"    "15"
    Option        "UpDownScrolling"    "1"
    Option        "CircularScrolling"    "1"
    Option        "CircScrollDelta"    "0.1"
    Option        "CircScrollTrigger"    "2"
EndSection

Section "InputDevice"
    Identifier    "Synaptics TouchPad"
    Driver        "synaptics"
    Option        "Device"        "/dev/psaux"
    Option        "Protocol"        "auto-dev"
    Option        "LeftEdge"        "1700"
    Option        "RightEdge"        "5300"
    Option        "TopEdge"        "1700"
    Option        "BottomEdge"        "4200"
    Option        "FingerLow"        "25"
    Option        "FingerHigh"        "30"
    Option        "MaxTapTime"        "180"
    Option        "MaxTapMove"        "220"
    Option        "VertScrollDelta"    "100"
    Option        "MinSpeed"        "0.06"
    Option        "MaxSpeed"        "0.12"
    Option        "AccelFactor"        "0.0010"
    Option        "SHMConfig"        "on"
    Option        "Repeater"        "/dev/ps2mouse"
EndSection

# Auto-generated by mkxf86config

Section "Monitor"
    Identifier    "Monitor0"
    Option    "DPMS"    "true"
    VendorName    "AUO"
    ModelName    "AUO1974"
#    HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
#    VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    #  Default modes distilled from
    #      "VESA and Industry Standards and Guide for Computer Display Monitor
    #       Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    #  $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    # Additional modelines
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    # 848x480 @ 60.00 Hz (GTF) hsync: 29.82 kHz; pclk: 31.49 MHz
    # 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    # 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
    # 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    # 1360x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 84.72 MHz
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    # 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
    # 1440x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 126.27 MHz
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    # 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
    # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 193.16 MHz
EndSection

Section "Device"
    ### Available Driver options are:-
    # sw_cursor is needed for some ati and radeon cards
    #Option        "sw_cursor"
    #Option        "hw_cursor"
    #Option        "NoAccel"
    #Option        "ShowCache"
    #Option        "ShadowFB"
    #Option        "UseFBDev"
    #Option        "Rotate"
    Option        "RenderAccel"        "1"
    # more speed for beryl/compiz
    Option        "XAANoOffscreenPixmaps"    "1"
    Identifier    "Card0"
    # The following line is auto-generated by mkxf86config
    Driver      "fglrx"
    Option      "UseInternalAGPGART" "no"
    Option      "VideoOverlay" "on"
    Option      "OpenGLOverlay" "off"
    Option      "MonitorLayout" "LVDS, AUTO"
    VendorName    "All"
    BoardName    "All"
    #BusID        "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier    "Screen0"
    Device        "Card0"
    Monitor        "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
        Depth    8
        Modes "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth    16
        Modes "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth    24
        Modes "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "DRI"
    Mode    0666
EndSection

Section "Extensions"
    Option    "Composite"    "1"
#    Option    "RENDER"    "1"
EndSection

tu jest xorg
---edit---
karta to ati radeon xpress 200m
P.S.
jak sie uda to wkleje screenshoty tych bledow

Ostatnio edytowany przez Bober (2007-11-11 23:10:11)

http://www.graal.boo.pl
http://www.graal.boo.pl/forum/

Offline

 

#4  2007-11-12 23:19:54

  MG_Peter - Członek DUG

MG_Peter
Członek DUG
Skąd: Gliwice
Zarejestrowany: 2005-07-29

Re: Beryl/compiz na ATI

Oki. Zaktualizuj system (głównie chodzi o xorg i stery ati)
Spróbuj zrobić to na AIXGL (standardowe extension xorg'a)

Do server layout dodaj

Kod:

Option "AIXGL" "true"

nieładuje GLCore, za to załadowane mają być dri i glx.
do sekcji "Device" karty grafiki spróbuj dodać:

Kod:

Option "no_accel" "no"
Option "no_dri" "no"
Option "AllowGLXWithComposite" "true"

Offline

 

#5  2007-12-04 08:50:28

  Bober - Użytkownik

Bober
Użytkownik
Skąd: Gdynia
Zarejestrowany: 2006-10-12
Serwis

Re: Beryl/compiz na ATI

Czesc!

Zmiana nic nie dala, niestety. Pogoglowalem troche i znalazlem ze ta karta po prostu tak ma :/ Znalazlem jakis tutorial na necie i dzis wieczorem, jak wroce do domu to bede probowal na podstawie niego beryla zrobic

Pozdrawiam

http://www.graal.boo.pl
http://www.graal.boo.pl/forum/

Offline

 

#6  2007-12-21 09:53:24

  Bober - Użytkownik

Bober
Użytkownik
Skąd: Gdynia
Zarejestrowany: 2006-10-12
Serwis

Re: Beryl/compiz na ATI

Zainstalowalem dzis bratu Debiana z netinstall i nowe stery do ATI ma karte o wiele nowasza niz moja a ma te same problemy :| Mozecie cos poradzic? Bo nie wiem nawet czego sie chwycic.

http://www.graal.boo.pl
http://www.graal.boo.pl/forum/

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)

[ Generated in 0.010 seconds, 9 queries executed ]

Informacje debugowania

Time (s) Query
0.00012 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00151 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.17.29.43' WHERE u.id=1
0.00098 UPDATE punbb_online SET logged=1716869913 WHERE ident='3.17.29.43'
0.00060 SELECT * FROM punbb_online WHERE logged<1716869613
0.00080 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=9685 AND t.moved_to IS NULL
0.00008 SELECT search_for, replace_with FROM punbb_censoring
0.00261 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=9685 ORDER BY p.id LIMIT 0,25
0.00101 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=9685
Total query time: 0.00775 s