Forum Debian Users Gang

seav · 2012-03-28 10:16:14

Witam, od paru dni jestem użytkownikiem debiana i na dobrą sprawę nie dużo wiem na temat systemu.

Moj problem polega na tym że kiedy uruchamiam grę / program do modelowania 3D zarówno gra jak i już wymodelowany obiekt tak strasznie się przycinają.

Nie mam pojęcia w czym jest problem szczerze mówiąc.

Wynik polecenia : glxinfo | grep OpenGL

Kod:

OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.7.1
OpenGL shading language version string: 1.20

ArnVaker · 2012-03-28 10:21:09

Jaką masz kartę graficzną?

seav · 2012-03-28 10:43:41

Wybacz nie wspomniałem, ATI HD 5400

ArnVaker · 2012-03-28 11:05:49

OK, spróbuj zatem zainstalować zamknięte sterowniki, wydajność powinna być na nich lepsza. Nie wiem jaką masz architekturę systemu i jakie środowisko graficzne, zatem nie podam dokładnie, ale na podstawie tego wątku powinieneś sobie poradzić: [url]http://forum.dug.net.pl/viewtopic.php?id=20935[/url].

pribina · 2012-03-28 12:31:37

Na otwartym sterowniku radeon wydajność w grach 3D jest bardzo niska. Jeżeli chcesz pograć w poważniejsze tytuły jak np. Doom 3 to musisz zainstalować własnościowy sterownik od AMD o nazwie fglrx.

seav · 2012-03-28 13:35:03

system debian amd64,
gnome 2.x

Zaraz spojrze w link który podałeś dam znać jak poszło lub nie poszło ;)

ArnVaker · 2012-03-28 13:39:14

To właściwie tak samo jak tam pisałem w poście 4, chyba że masz inny menedżer logowania niż gdm3, wtedy zamiast gdm3 wpisujesz jego nazwę. Poza tym możesz jeszcze doinstalować [deb]ia32-libs[/deb] jeśli nie masz, potrzebne np. do odpalania 32-bitowych gier na systemie 64-bitowym.

seav · 2012-03-28 13:45:06

mam gdm3 i mam ia32-libs ;)

ArnVaker · 2012-03-28 13:47:04

Do dzieła w takim razie. ;)

PS Przypadek z tamtego wątku był dosyć ekstremalny, zazwyczaj wystarczy po prostu zainstalować. :)

fervi · 2012-03-28 14:28:07

Ogólnie jeśli instalacja się nie powiedzie (są takie przypadki), spróbuj używać sterowników Gallium3D (powinny być szybsze)

Fervi

seav · 2012-03-28 14:54:42

fglrxinfo

Kod:

display: :0.0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Mobility Radeon HD 5400 Series 
OpenGL version string: 4.2.11554 Compatibility Profile Context

Niestety ale mialem maly wypadek przy instalacji, nieumyślnie dalem startx jakbył włączdony gdm3 i dostałem blackscreena, nic się nie działo więc zresetowalem lapka. ALE jak już się odpalał czcionka byla zmieniona i zauwazyłem że GNOME o wiele wolniej mi się ładuje.

fragment xorg.conf

Kod:

 Identifier  "Card0"
        Driver      "radeon"
        VendorName  "ATI Technologies Inc"
        BoardName   "Manhattan [Mobility Radeon HD 5000 Series]"
        BusID       "PCI:1:0:0"

...
Section "Device"
        Identifier  "aticonfig-Device[0]-0"
        Driver      "fglrx"
        BusID       "PCI:1:0:0"
EndSection

Ostatnio edytowany przez seav (2012-03-28 15:02:23)

ArnVaker · 2012-03-28 14:59:31

Ale teraz kiedy już w końcu zainstalowałeś jest w porządku, czy nadal jakieś problemy występują?

seav · 2012-03-28 15:06:19

@ArnVaker, wybacz nie zdąrzyłem wyedytować.

Widać ZNAAAAACZNĄ różnicę ;)). Żadnego przycięcia.

Jeszcze gdybym mógł poprosić Cie o pomoc z szybszym uruchamianiem Xów i cud miód ;).

Tak jak pisałem w poście wcześniej. Czcionka sama się zmeiniła, wiec pewnie to sprawka sterownika, i troszke wolniej, ale zauważalnie wolniej ładują się X`y.

ArnVaker · 2012-03-28 15:10:40

Dlaczego masz w xorg.conf zdefiniowany zarówno sterownik radeon, jaki i fglrx? Tego pierwszego chyba nie powinno tam być jeśli używasz fglrx. Zmiana czcionki w trybie tekstowym jest normalna, ponieważ KMS nie działa na zamkniętych sterownikach. Natomiast czemu GNOME długo się uruchamia to nie wiem. Konkretnie GNOME czy w ogóle X-y? Może w logu: /var/log/Xorg.0.log będzie coś na ten temat. Może to właśnie przez ten dziwny xorg.conf.

[b]EDIT:[/b] A tak poza tematem: jeśli chcesz żeby wszystko się szybciej uruchamiało, to polecam programik e4rat. :)

seav · 2012-03-28 15:18:32

Oto cały mój xorg.conf :

Kod:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "dri"
    Load  "extmod"
    Load  "record"
    Load  "dri2"
    Load  "glx"
    Load  "dbe"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"

    #DisplaySize      340   190    # mm
    Identifier   "Monitor0"
    VendorName   "AUO"
    ModelName    "12ec"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "CustomEDID"             # [<str>]
        #Option     "DisplayPriority"        # [<str>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "RenderAccel"            # [<bool>]
        #Option     "SubPixelOrder"          # [<str>]
        #Option     "ClockGating"            # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
        #Option     "EXAVSync"               # [<bool>]
        #Option     "ATOMTVOut"              # [<bool>]
        #Option     "R4xxATOM"               # [<bool>]
        #Option     "ForceLowPowerMode"      # [<bool>]
        #Option     "DynamicPM"              # [<bool>]
        #Option     "NewPLL"                 # [<bool>]
        #Option     "ZaphodHeads"            # <str>
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI Technologies Inc"
    BoardName   "Manhattan [Mobility Radeon HD 5000 Series]"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

/var/log/Xorg.0.log :

Kod:

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
Current Operating System: Linux admin 2.6.32-5-amd64 #1 SMP Mon Jan 16 16:22:28 UTC 2012 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=ee03bff9-f0c2-4bac-90e0-72d8e9af8c7f ro quiet
Build Date: 29 October 2011  06:58:14PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 28 14:43:06 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:68e0:1025:036d ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] rev 0, Mem @ 0x80000000/268435456, 0x94000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="Advanced Micro Devices, Inc."
    compiled for 6.9.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.95.3
    Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.95.3
(II) ATI Proprietary Linux Driver Version Identifier:8.95.3
(II) ATI Proprietary Linux Driver Release Identifier: 8.95                                 
(II) ATI Proprietary Linux Driver Build Date: Feb 14 2012 21:05:02
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x68E0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x20f8540
(II) fglrx(0): === [xdl_x750_atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 10, (OK)
ukiOpenByBusid: ukiOpenMinor returns 10
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(**) fglrx(0): NoAccel = NO
(**) fglrx(0): ATI 2D Acceleration Architecture enabled
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5400 Series " (Chipset = 0x68e0)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x036d)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0x80000000
(--) fglrx(0): MMIO registers at 0x94000000
(--) fglrx(0): I/O port at 0x00003000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): ATIF platform detected
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 12.19
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: PARK
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 29.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: LVDS
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AUO  Model: 12ec  Serial#: 0
(II) fglrx(0): Year: 2008  Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.342   greenX: 0.310 greenY: 0.580
(II) fglrx(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 72.0 MHz   Image Size:  344 x 193 mm
(II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(II) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0):  AUO
(II) fglrx(0):  B156XW01 V2
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff0006afec1200000000
(II) fglrx(0):     01120103802213780ae6b5a3574f9426
(II) fglrx(0):     1e505400000001010101010101010101
(II) fglrx(0):     010101010101201c5678500026303020
(II) fglrx(0):     340058c1100000180000000f00000000
(II) fglrx(0):     00000000000000000020000000fe0041
(II) fglrx(0):     554f0a202020202020202020000000fe
(II) fglrx(0):     004231353658573031205632200a0026
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): EDID for output LVDS
(II) fglrx(0): Manufacturer: AUO  Model: 12ec  Serial#: 0
(II) fglrx(0): Year: 2008  Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.342   greenX: 0.310 greenY: 0.580
(II) fglrx(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 72.0 MHz   Image Size:  344 x 193 mm
(II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(II) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0):  AUO
(II) fglrx(0):  B156XW01 V2
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff0006afec1200000000
(II) fglrx(0):     01120103802213780ae6b5a3574f9426
(II) fglrx(0):     1e505400000001010101010101010101
(II) fglrx(0):     010101010101201c5678500026303020
(II) fglrx(0):     340058c1100000180000000f00000000
(II) fglrx(0):     00000000000000000020000000fe0041
(II) fglrx(0):     554f0a202020202020202020000000fe
(II) fglrx(0):     004231353658573031205632200a0026
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Printing probed modes for output LVDS
(II) fglrx(0): Modeline "1366x768"x60.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Modeline "1360x768"x60.0   72.00  1360 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Modeline "1280x768"x60.0   72.00  1280 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Modeline "1280x720"x60.0   72.00  1280 1414 1446 1486  720 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Modeline "1024x768"x60.0   72.00  1024 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Modeline "1024x600"x60.0   72.00  1024 1414 1446 1486  600 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Modeline "800x600"x60.0   72.00  800 1414 1446 1486  600 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Modeline "800x480"x60.0   72.00  800 1414 1446 1486  480 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): Modeline "640x480"x60.0   72.00  640 1414 1446 1486  480 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID for output DFP1
(II) fglrx(0): EDID for output CRT1
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LVDS using initial mode 1366x768
(II) fglrx(0): Display dimensions: (340, 190) mm
(II) fglrx(0): DPI set to (102, 102)
(II) fglrx(0): Eyefinity capable adapter detected.
(II) fglrx(0): Adapter ATI Mobility Radeon HD 5400 Series  has 4 configurable heads and 1 displays connected.
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 13, (OK)
ukiOpenByBusid: ukiOpenMinor returns 13
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f67eb97e000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.95.3
(II) fglrx(0):     Date: Feb 14 2012
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.32-5-amd64
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 592
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 2.0.0
(II) Loading extension AMDXVOPL
(II) Loading extension AMDXVBA
(II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 15, (OK)
ukiOpenByBusid: ukiOpenMinor returns 15
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 361 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event7)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.6.901, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event7"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Video Bus (/dev/input/event3)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Lid Switch (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event6)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event6"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device 1.3M WebCam (/dev/input/event9)
(**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
(**) 1.3M WebCam: always reports core events
(**) 1.3M WebCam: Device: "/dev/input/event9"
(II) 1.3M WebCam: Found keys
(II) 1.3M WebCam: Configuring as keyboard
(II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/event2)
(**) Razer Razer Diamondback 3G: Applying InputClass "evdev pointer catchall"
(**) Razer Razer Diamondback 3G: always reports core events
(**) Razer Razer Diamondback 3G: Device: "/dev/input/event2"
(II) Razer Razer Diamondback 3G: Found 11 mouse buttons
(II) Razer Razer Diamondback 3G: Found scroll wheel(s)
(II) Razer Razer Diamondback 3G: Found relative axes
(II) Razer Razer Diamondback 3G: Found x and y relative axes
(II) Razer Razer Diamondback 3G: Configuring as mouse
(**) Razer Razer Diamondback 3G: YAxisMapping: buttons 4 and 5
(**) Razer Razer Diamondback 3G: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer Razer Diamondback 3G" (type: MOUSE)
(II) Razer Razer Diamondback 3G: initialized for relative axes.
(II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event11)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.6.901, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event11"
(II) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
(II) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
(II) ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
(II) ETPS/2 Elantech Touchpad: finger width range 0 - 0
(II) ETPS/2 Elantech Touchpad: buttons: left right middle double triple
(--) ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse2)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
ETPS/2 Elantech Touchpad no synaptics event device found
(**) Option "Device" "/dev/input/mouse2"
Query no Synaptics: 6003C8
(--) ETPS/2 Elantech Touchpad: no supported touchpad found
(EE) ETPS/2 Elantech Touchpad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ETPS/2 Elantech Touchpad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device PC Speaker (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) fglrx(0): EDID vendor "AUO", prod id 4844
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)

Program e4rat zaraz sprawdzę :)) . Nurtuje mnie jeszcze tylko problem tej straaaaasznie brzydkiej czcionki która, psuje estetykę :P.

ArnVaker · 2012-03-28 15:31:45

Nic tam szczególnego nie widzę w Xorg.0.log szczerze mówiąc. Ten xorg.conf taki został automatycznie wygenerowany czy sam coś w nim grzebałeś? Spróbuj całą tę sekcję zakomentować, zobaczymy czy to coś da:

Kod:

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "CustomEDID"             # [<str>]
        #Option     "DisplayPriority"        # [<str>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "RenderAccel"            # [<bool>]
        #Option     "SubPixelOrder"          # [<str>]
        #Option     "ClockGating"            # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
        #Option     "EXAVSync"               # [<bool>]
        #Option     "ATOMTVOut"              # [<bool>]
        #Option     "R4xxATOM"               # [<bool>]
        #Option     "ForceLowPowerMode"      # [<bool>]
        #Option     "DynamicPM"              # [<bool>]
        #Option     "NewPLL"                 # [<bool>]
        #Option     "ZaphodHeads"            # <str>
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI Technologies Inc"
    BoardName   "Manhattan [Mobility Radeon HD 5000 Series]"
    BusID       "PCI:1:0:0"
EndSection

=================

Czcionka, że taka wielka, tak? :) Wydaje mi się, że powinno dać się użyć vesafb/uvesafb. Wydaje mi się, ponieważ sam mam Nvidię i w jej przypadku się da, a w tym przypadku nie jestem pewien. W każdym razie tutaj opisałem jak to zrobić: [url=http://dug.net.pl/tekst/142/nvidia___zamkniete_sterowniki_w_debianie/#rozdzielczosc_trybu_tekstowego]„Rozdzielczość trybu tekstowego”[/url]. Tamten tekst generalnie jest o sterownikach Nvidii, ale akurat tego fragmentu można użyć również w innych przypadkach.

seav · 2012-03-28 15:37:01

Tzn tak. jak nic przy xorgu nie grzebałem i nawet niedawno go konfigurowałem przez :

Kod:

X -configure

po zamknieciu X`ów.

Zrestartuje jeszcze raz system zobacz czy się cos poprawiło

ArnVaker · 2012-03-28 15:43:58

Może to właśnie dlatego, że wygenerowałeś wcześniej xorg.conf. Podczas instalacji sterowników tworzony jest xorg.conf, w tym przypadku pewnie wyszła taka hybryda jednego z drugim. Możesz spróbować przenieść tymczasowo ten co masz i wygenerować nowy:

Kod:

mv /etc/X11/xorg.conf /etc/X11/xorg.conf.stary
aticonfig --initial

seav · 2012-03-28 15:59:55

Teraz też miałeś racje :).

X`y wstają o niebo szybciej. Musiałem wygenerować xorg.conf`a jeszcze raz.

Serdecznie dziękuję za dotychczasową pomoc :).

PS. Ładny artykuł, poczytam :). I wypróbuję e4rat`a.

Time (s)	Query
0.00011	SET CHARSET latin2
0.00005	SET NAMES latin2
0.00085	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.149.234.50' WHERE u.id=1
0.00076	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.149.234.50', 1732208118)
0.00057	SELECT * FROM punbb_online WHERE logged<1732207818
0.00057	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=20973 AND t.moved_to IS NULL
0.00006	SELECT search_for, replace_with FROM punbb_censoring
0.00250	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=20973 ORDER BY p.id LIMIT 0,25
0.00078	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=20973
Total query time: 0.00625 s

Forum Debian Users Gang

Ogłoszenie

#1 2012-03-28 10:16:14

seav - Użytkownik

Przycięcia w grach.

Kod:

#2 2012-03-28 10:21:09

ArnVaker - Kapelusznik

Re: Przycięcia w grach.

#3 2012-03-28 10:43:41

seav - Użytkownik

Re: Przycięcia w grach.

#4 2012-03-28 11:05:49

ArnVaker - Kapelusznik

Re: Przycięcia w grach.

#5 2012-03-28 12:31:37

pribina - Użytkownik

Re: Przycięcia w grach.

#6 2012-03-28 13:35:03

seav - Użytkownik

Re: Przycięcia w grach.

#7 2012-03-28 13:39:14

ArnVaker - Kapelusznik

Re: Przycięcia w grach.

#8 2012-03-28 13:45:06

seav - Użytkownik

Re: Przycięcia w grach.

#9 2012-03-28 13:47:04

ArnVaker - Kapelusznik

Re: Przycięcia w grach.

#10 2012-03-28 14:28:07

fervi - Użytkownik

Re: Przycięcia w grach.

#11 2012-03-28 14:54:42

seav - Użytkownik

Re: Przycięcia w grach.

Kod:

Kod:

#12 2012-03-28 14:59:31

ArnVaker - Kapelusznik

Re: Przycięcia w grach.

#13 2012-03-28 15:06:19

seav - Użytkownik

Re: Przycięcia w grach.

#14 2012-03-28 15:10:40

ArnVaker - Kapelusznik

Re: Przycięcia w grach.

#15 2012-03-28 15:18:32

seav - Użytkownik

Re: Przycięcia w grach.

Kod:

Kod:

#16 2012-03-28 15:31:45

ArnVaker - Kapelusznik

Re: Przycięcia w grach.

Kod:

#17 2012-03-28 15:37:01

seav - Użytkownik

Re: Przycięcia w grach.

Kod:

#18 2012-03-28 15:43:58

ArnVaker - Kapelusznik

Re: Przycięcia w grach.

Kod:

#19 2012-03-28 15:59:55

seav - Użytkownik

Re: Przycięcia w grach.

Stopka forum

Informacje debugowania