Forum Debian Users Gang

.
.
.
18/01/2009 10:14:22 *** XOpenDisplay failed. No -display or DISPLAY.
18/01/2009 10:14:22 *** Trying ":0" in 4 seconds.  Press Ctrl-C to abort.
18/01/2009 10:14:22 *** 1 2 3 4
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

18/01/2009 10:14:26

18/01/2009 10:14:26 ***************************************
18/01/2009 10:14:26 *** XOpenDisplay failed (:0)

*** x11vnc was unable to open the X DISPLAY: ":0", it cannot continue.
*** There may be "Xlib:" error messages above with details about the failure.

Some tips and guidelines:

 * An X server (the one you wish to view) must be running before x11vnc is
   started: x11vnc does not start the X server.

 * You must use -display <disp>, -OR- set and export your DISPLAY
   environment variable to refer to the display of the desired X server.
 - Usually the display is simply ":0" (in fact x11vnc uses this if you forget
   to specify it), but in some multi-user situations it could be ":1", ":2",
   or even ":137".  Ask your administrator or a guru if you are having
   difficulty determining what your X DISPLAY is.

 * Next, you need to have sufficient permissions (Xauthority)
   to connect to the X DISPLAY.   Here are some Tips:

 - Often, you just need to run x11vnc as the user logged into the X session.
   So make sure to be that user when you type x11vnc.
 - Being root is usually not enough because the incorrect MIT-MAGIC-COOKIE
   file will be accessed.  The cookie file contains the secret key that
   allows x11vnc to connect to the desired X DISPLAY.
 - You can explicity indicate which MIT-MAGIC-COOKIE file should be used
   by the -auth option, e.g.:
       x11vnc -auth /home/someuser/.Xauthority -display :0
       x11vnc -auth /tmp/.gdmzndVlR -display :0
   you must have read permission for the auth file.

 - If NO ONE is logged into an X session yet, but there is a greeter login
   program like "gdm", "kdm", "xdm", or "dtlogin" running, you will need
   to find and use the raw display manager MIT-MAGIC-COOKIE file.
   Some examples for various display managers:

     gdm:     -auth /var/gdm/:0.Xauth
     kdm:     -auth /var/lib/kdm/A:0-crWk72
     xdm:     -auth /var/lib/xdm/authdir/authfiles/A:0-XQvaJk
     dtlogin: -auth /var/dt/A:0-UgaaXa

   Only root will have read permission for the file, and so x11vnc must be run
   as root.  The random characters in the filenames will of course change,
   and the directory the cookie file resides in may also be system dependent.
   Sometimes the command "ps wwaux | grep auth" can reveal the file location.

See also: http://www.karlrunge.com/x11vnc/#faq
debian:/home/vasylek# clear
debian:/home/vasylek# x11vnc -usepw
18/01/2009 10:14:42 -usepw: found /root/.vnc/passwd

Settings:
 display:    null
 authfile:   null
 subwin:     0x0
 -sid mode:  0
 clip:       null
 flashcmap:  0
 shiftcmap:  0
 force_idx:  0
 cmap8to24:  0
 8to24_opts: null
 24to32:     0
 visual:     null
 overlay:    0
 ovl_cursor: 1
 scaling:    0 1.0000
 viewonly:   0
 shared:     0
 conn_once:  1
 timeout:    0
 inetd:      0
 filexfer:   1
 http:       0
 connect:    null
 connectfile null
 vnc_conn:   1
 allow:      null
 input:      null
 passfile:   null
 unixpw:     0
 unixpw_lst: null
 stunnel:    0
 accept:     null
 accept:     null
 gone:       null
 users:      null
 using_shm:  1
 flipbytes:  0
 onetile:    0
 solid:      null
 blackout:   null
 xinerama:   1
 xtrap:      0
 xrandr:     0
 xrandrmode: null
 padgeom:    null
 logfile:    null
 logappend:  0
 flag:       null
 rc_file:    ""
 norc:       0
 dbg:        0
 bg:         0
 mod_tweak:  1
 isolevel3:  0
 xkb:        0
 skipkeys:   null
 sloppykeys: 0
 skip_dups:  0
 addkeysyms: 1
 xkbcompat:  0
 clearmods:  0
 remap:      null
 norepeat:   1
 norepeatcnt:2
 nofb:       0
 watchbell:  1
 watchsel:   1
 watchprim:  1
 seldir:     null
 cursor:     1
 multicurs:  0
 curs_mode:  null
 arrow:      1
 xfixes:     1
 alphacut:   240
 alphafrac:  0.33
 alpharemove:0
 alphablend: 1
 cursorshape:1
 cursorpos:  1
 xwarpptr:   0
 buttonmap:  null
 dragging:   1
 wireframe:  0xff,3,0,32+8+8+8,all,0.15+0.30+5.0+0.125
 wirecopy:   always
 scrollcopy: always
  scr_area:  60000
  scr_skip:  ##Soffice.bin,##StarOffice
  scr_inc:   ##Nomatch
  scr_keys:  null
  scr_term:  null
  scr_keyrep: null
  scr_parms: 0+64+32+32,0.02+0.10+0.9,0.03+0.06+0.5+0.1+5.0
 fixscreen:  null
 noxrecord:  0
 grabbuster: 0
 ptr_mode:   2
 inputskip:  10
 speeds:     null
 wmdt:       null
 debug_ptr:  0
 debug_key:  0
 defer:      30
 waitms:     30
 wait_ui:    2.00
 nowait_bog: 0
 slow_fb:    0.00
 readtimeout: 20
 take_naps:  1
 sb:         60
 fbpm:       1
 xdamage:    1
  xd_area:   20000
  xd_mem:    1.000
 sigpipe:    null
 threads:    0
 fs_frac:    0.75
 gaps_fill:  4
 grow_fill:  3
 tile_fuzz:  2
 snapfb:     0
 rawfb:      null
 pipeinput:  null
 gui:        0
 gui_mode:   null
 noremote:   0
 unsafe:     0
 privremote: 0
 safer:      0
 nocmds:     0
 deny_all:   0
 pid:        3414

18/01/2009 10:14:42 x11vnc version: 0.8.2 lastmod: 2006-07-12
18/01/2009 10:14:42
18/01/2009 10:14:42 *** XOpenDisplay failed. No -display or DISPLAY.
18/01/2009 10:14:42 *** Trying ":0" in 4 seconds.  Press Ctrl-C to abort.
18/01/2009 10:14:42 *** 1 2 3 4
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

18/01/2009 10:14:46

18/01/2009 10:14:46 ***************************************
18/01/2009 10:14:46 *** XOpenDisplay failed (:0)

*** x11vnc was unable to open the X DISPLAY: ":0", it cannot continue.
*** There may be "Xlib:" error messages above with details about the failure.

Some tips and guidelines:

 * An X server (the one you wish to view) must be running before x11vnc is
   started: x11vnc does not start the X server.

 * You must use -display <disp>, -OR- set and export your DISPLAY
   environment variable to refer to the display of the desired X server.
 - Usually the display is simply ":0" (in fact x11vnc uses this if you forget
   to specify it), but in some multi-user situations it could be ":1", ":2",
   or even ":137".  Ask your administrator or a guru if you are having
   difficulty determining what your X DISPLAY is.

 * Next, you need to have sufficient permissions (Xauthority)
   to connect to the X DISPLAY.   Here are some Tips:

 - Often, you just need to run x11vnc as the user logged into the X session.
   So make sure to be that user when you type x11vnc.
 - Being root is usually not enough because the incorrect MIT-MAGIC-COOKIE
   file will be accessed.  The cookie file contains the secret key that
   allows x11vnc to connect to the desired X DISPLAY.
 - You can explicity indicate which MIT-MAGIC-COOKIE file should be used
   by the -auth option, e.g.:
       x11vnc -auth /home/someuser/.Xauthority -display :0
       x11vnc -auth /tmp/.gdmzndVlR -display :0
   you must have read permission for the auth file.

 - If NO ONE is logged into an X session yet, but there is a greeter login
   program like "gdm", "kdm", "xdm", or "dtlogin" running, you will need
   to find and use the raw display manager MIT-MAGIC-COOKIE file.
   Some examples for various display managers:

     gdm:     -auth /var/gdm/:0.Xauth
     kdm:     -auth /var/lib/kdm/A:0-crWk72
     xdm:     -auth /var/lib/xdm/authdir/authfiles/A:0-XQvaJk
     dtlogin: -auth /var/dt/A:0-UgaaXa

   Only root will have read permission for the file, and so x11vnc must be run
   as root.  The random characters in the filenames will of course change,
   and the directory the cookie file resides in may also be system dependent.
   Sometimes the command "ps wwaux | grep auth" can reveal the file location.

See also: http://www.karlrunge.com/x11vnc/#faq

Czytanie list pakietĂłw... Gotowe
Budowanie drzewa zaleĹźnoĹi... Gotowe
Odczyt dodatkowych informacji o stanie
Inicjalizacja stanĂłw pakietĂłw... Gotowe
Zapisywanie dodatkowych informacji o stanie... Gotowe
Odczyt opisĂłw zadaĹ
Odczyt opisĂłw zadaĹ... 0%
Odczyt opisĂłw zadaĹ... 0%
                    ... Gotowe
Budowanie bazy etykiet... Gotowe
NastÄpujÄ
ce pakiety zostaĹy zatrzymane:
  bind9 bind9-doc bind9-host dnsutils iceweasel iceweasel-gnome-support libbind9-0 libdns22 libisc11 libisccc0 libisccfg1 liblwres9 libmozjs0d libnspr4-0d libnss3-0d
  libssl0.9.8 libxul-common libxul0d linux-image-2.6.18-6-486 login lwresd netatalk openssl passwd spamassassin spamc xulrunner-gnome-support
0 pakietĂłw uaktualnianych, 0 instalowanych, 0 do usuniÄcia i 27 nie uaktualnianych.
Do pobrania 0B archiwĂłw. ZajÄte po rozpakowaniu: 0B.
Zapisywanie dodatkowych informacji o stanie... Gotowe