Forum Debian Users Gang

ilin · 2009-03-10 12:21:53

Po co chcesz kompilować sterownik.Ten co jest w xorgu jest dobry.Jaki masz problem z tą kartą.
Mój xorg.conf

Kod:

kasia@debian:~$ cat /etc/X11/xorg.conf
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/etc/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "xtrap"
        Load  "GLcore"
        Load  "extmod"
        Load  "record"
        Load  "dbe"
        Load  "glx"
        Load  "dri"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"              "xorg"
        Option          "XkbModel"              "pc105"
        Option          "XkbLayout"             "pl"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        #DisplaySize      330   210     # mm
        Identifier   "Monitor0"
        VendorName   "LPL"
        ModelName    "LP154WX4-TLD4"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Driver      "intel"
        VendorName  "Intel Corporation"
        BoardName   "Mobile GM965/GL960 Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Wygenerowany za pomocą

Kod:

X -configure

Akceleracja działa.

Kod:

kasia@debian:~$ glxgears
do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly.
Try adjusting the vblank_mode configuration parameter.
3236 frames in 5.0 seconds = 647.177 FPS
3329 frames in 5.0 seconds = 665.639 FPS
60089 frames in 5.0 seconds = 12017.651 FPS
3956 frames in 5.0 seconds = 791.096 FPS
3973 frames in 5.0 seconds = 794.589 FPS
3976 frames in 5.0 seconds = 795.111 FPS
3940 frames in 5.0 seconds = 787.830 FPS
3912 frames in 5.0 seconds = 782.306 FPS

[b]openarena[/b] śmiga bez zająknięcia.Oczywiście nie mam compiza. :)

Ostatnio edytowany przez ilin (2009-03-10 12:30:31)

jarek · 2009-03-10 14:46:36

Też nie używam compiza ;) Ale jakoś ta karta zdaje mi się, że kijowo chodzi pod linuxem... ;/

Przykład:
Odpalam sobie: Alien Arena jest ok puki nie ma nikogo na mapie oprócz mnie.. jeżeli ktoś się pojawi już mam ~~2-5 fpsów... tak samo jak jakiś dymek wychodzący z jakieś rury i już 4-5 fpsów...
tak samo jest w przypadku gry: sauerbraten

Właśnie wygenerowałem też za pomocą: X -configure i zauważyłem jakieś spowolnienie kompa tak samo nawet przy używaniu FF... wszystko jakoś wolniej się uruchamia itd.

troszkę info:

Kod:

jarek@localhost:~$ glxgears
5310 frames in 5.0 seconds = 1061.893 FPS
5785 frames in 5.0 seconds = 1156.857 FPS
5645 frames in 5.0 seconds = 1128.962 FPS
5729 frames in 5.0 seconds = 1145.639 FPS
5716 frames in 5.0 seconds = 1143.163 FPS
5646 frames in 5.0 seconds = 1129.053 FPS
5650 frames in 5.0 seconds = 1129.976 FPS

Kod:

cat /etc/X11/xorg.conf
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/etc/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "glx"
        Load  "extmod"
        Load  "dbe"
        Load  "GLcore"
        Load  "xtrap"
        Load  "record"
        Load  "dri"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        #DisplaySize      330   210     # mm
        Identifier   "Monitor0"
        VendorName   "LEN"
        ModelName    "4050"
        Option      "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Driver      "intel"
        VendorName  "Intel Corporation"
        BoardName   "Mobile GM965/GL960 Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Kod:

jarek@localhost:~$ uname -r
2.6.27-1-mepis-pae

Kod:

jarek@localhost:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)

Kod:

cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz
stepping        : 13
cpu MHz         : 2000.000
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
initial apicid  : 0
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 3991.16
clflush size    : 64
power management:

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz
stepping        : 13
cpu MHz         : 2000.000
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
apicid          : 1
initial apicid  : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 3991.24
clflush size    : 64
power management:

Laptop mój to Lenovi R61i + 4 GB RAMU, Seagate HDD 320 GB 7200 obrotów (ten model: http://www.komputronik.pl/Dyski_twarde/Seagate_Momentus_7200_3_320_GB_7200_16MB_Serial_ATA/300_G_Force_/pelny,id,57917/)

Zauważyłem teraz, że chyba obciąża FLASH strasznie mi CPU w FF3... (patrząc na komputronik.pl) Też tak może masz przy tej karcie?

a i wynik:

Kod:

root@localhost:~# dpkg -s xserver-xorg-video-intel
Package: xserver-xorg-video-intel
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 716
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: i386
Version: 2:2.3.2-2+lenny6
Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-driver-i810, xserver-xorg-video-i810 (<< 2:1.9.91-1), xserver-xorg-video-i810-modesetting, xserver-xorg-video-intel-modesetting
Provides: xserver-xorg-video-2
Depends: libc6 (>= 2.7-1), libdrm2 (>= 2.3.1), xserver-xorg-core (>= 2:1.4)
Conflicts: 915resolution, xserver-xorg-driver-i810, xserver-xorg-video-i810 (<< 2:1.9.91-1), xserver-xorg-video-i810-modesetting, xserver-xorg-video-intel-modesetting
Description: X.Org X server -- Intel i8xx, i9xx display driver
 This package provides the driver for the Intel i8xx and i9xx family
 of chipsets, including i810, i815, i830, i845, i855, i865, i915, i945
 and i965 series chips.
 .
 This package also provides an XvMC (XVideo Motion Compensation) driver
 for i810 and i815 chipsets.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 <URL:http://xorg.freedesktop.org>
 <URL:http://lists.freedesktop.org/mailman/listinfo/xorg>
 .
 This package is built from the X.org xf86-video-intel driver module.

ogólnie lapek teraz chodzi jakbym miał ze 256MB ramu... i procek jakiś P3 600 MHz ;p

ilin · 2009-03-10 15:24:30

Zobacz jakie masz obciązenie procka na luzie np za pomocą htop.

Ja mam jajo 2.6.29rc7

Na wcześniejszych wersjach kerneli od jakiegoś czasu (nie potrafię powiedziec od jakiej wersji bo zbyt późno zauważyłem) acpid pożeral mi 40-50% procka.
Dopiero przejscie na 2.6.29 rozwiązalo problem.

jarek · 2009-03-10 16:01:44

Akurat ja takiego problemu nie mam z acip.
Najwięcej mi zabiera CPU: /usr/bin/X -br -dpi 96 -nolisten tcp :0 vt7

ilin · 2009-03-10 16:06:16

Tzn htop go nie pokazywał.

Ale na gorze są dwa paski od obciążenia rdzeni i tam było bardzo duze obciązenie w granicach 50% na obu rdzeniach.
Wylistowany tenproces nie był.

Pomagało tylko wywalenie acpid.

Lub obecne jajo.

Tak że zwroc uwagę na to ile jest sumarycznie na górze procek obciązony.
Choć nie twierdzę że u Ciebie tak musi być.
W końcu inny lapek.

P.S Teraz dzieci okupują lapka jak pójda spać to zobaczę czy ten libdrm-dev da się zainstalować.:)

Ostatnio edytowany przez ilin (2009-03-10 16:07:20)

jarek · 2009-03-10 16:52:55

u mnie jest w stanie spoczynku obciążenie na poziomie: 0-2% na rdzeń, czasem tylko skacze: "/usr/bin/X ..." na 10-15% ale to raz na ruski rok.. :P
Co do libdrm-dev już sobie poradziłem poprzez cofnięcie go do starszej wersji jeszcze z repo mepisa no i libdrm-dev poszedł bez problemowo, oraz instalacja xf86-video-intel... też ok, ale nadal mam te problemy przy grach (w sumie nie gram codziennie... raz na ruski rok) aczkolwiek czuje też dyskomfort przy pracy codziennej na lapku..

przyjrzyj się też np: top'u komputronika (tylko przykład)
http://wstaw.org/images/free/2009/03/10/ee3e672e966aaec9a5bf302ebc9ce8.png

Gdzie mi się jakoś 'rozmywa' czasem obraz...

wycinek z: /home/jarek/.xsession-errors

Kod:

Xsession: X session started for jarek at wto, 10 mar 2009, 16:38:59 CET
/home/jarek/.Xresources:1:24: warning: missing terminating ' character
/home/jarek/.Xresources:100:28: warning: missing terminating ' character
startkde: Starting up...
kbuildsycoca running...
/var/tmp/kde-jarek/kcminitSew77a.tmp:467:24: warning: missing terminating ' character
/var/tmp/kde-jarek/kcminitSew77a.tmp:566:28: warning: missing terminating ' character
OggS-SEEK: at 0 want 350200 got 345536 (diff-requested 350200)
OggS-SEEK: at 349632 want 520 got 0 (diff-requested -349112)
OpenOffice path is '/usr/lib/openoffice'
GCJ PLUGIN: thread 0x9771070: NP_GetMIMEDescription
GCJ PLUGIN: thread 0x9771070: NP_GetMIMEDescription return
GCJ PLUGIN: thread 0x9771070: NP_GetValue
GCJ PLUGIN: thread 0x9771070: NP_GetValue: returning plugin name.
GCJ PLUGIN: thread 0x9771070: NP_GetValue return
GCJ PLUGIN: thread 0x9771070: NP_GetValue
GCJ PLUGIN: thread 0x9771070: NP_GetValue: returning plugin description.
GCJ PLUGIN: thread 0x9771070: NP_GetValue return
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  19
  Minor opcode:  0
  Resource id:  0x1c00013
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  20
  Minor opcode:  0
  Resource id:  0x1c00013
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  20
  Minor opcode:  0
  Resource id:  0x1c00013
err:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
err:ole:CoUninitialize Mismatched CoUninitialize
err:module:import_dll Library TDI.SYS (which is needed by L"C:\\windows\\system32\\drivers\\nltdi.sys") not found
err:winedevice:ServiceMain driver L"nltdi" failed to load
QFile::open: No file name specified
QFile::open: No file name specified
err:module:import_dll Library MSVCP71.dll (which is needed by L"C:\\Program Files\\ThunderbirdPortable\\App\\thunderbird\\components\\nppl3260.dll") not found
err:module:import_dll Library MSVCP71.dll (which is needed by L"C:\\Program Files\\ThunderbirdPortable\\App\\thunderbird\\components\\nprpjplug.dll") not found
fixme:iphlpapi:NotifyAddrChange (Handle 0x7d9c7a08, overlapped 0x7d9c79ec): stub
fixme:system:SetProcessDPIAware stub!
fixme:msimtf:ActiveIMMApp_Activate Stub
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x1002e 24 0 33f458)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x1002e 81 0 33f2f4)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x1002e 83 0 33f71c)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x1002e 1 0 33f2f4)
fixme:msimtf:ActiveIMMApp_FilterClientWindows Stub
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10032 24 0 33f6e4)
...
...
... dość dużo tutaj tego :P
...
...
...
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x1004a 5 0 6200c6)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10046 46 0 33e35c)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10046 83 1 33e278)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10046 47 0 33e35c)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10046 5 0 4a00dc)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10044 46 0 33e360)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10044 47 0 33e360)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10042 46 0 33e360)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10042 47 0 33e360)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10040 46 0 33e360)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10040 47 0 33e360)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 46 0 33edd4)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 47 0 33edd4)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 47 0 33f4bc)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 3 0 2ea0015)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 5 1 200020)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 1f 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 86 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 6 10000 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10040 1c 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x30034 1c 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10032 1c 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x1002e 1c 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10042 1c 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10044 1c 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x70066 1c 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 1c 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x1003e 8 0 0)
fixme:msimtf:ActiveIMMApp_OnDefWindowProc Stub (0x10036 f 0 0)
QClipboard: timed out while sending data
QClipboard: timed out while sending data

ma ktoś jakiś pomysł? ;]

ilin · 2009-03-10 17:50:14

Więc kompilacja sterownika nic nie dała.

U mnie na tej stronce jest ok.
Tyle ze opery używam.

Obciązenie procka waha się do 10% w szczycie z czego 8% na operę przypada.

Te logi to głownie błędy wine. :)

Ostatnio edytowany przez ilin (2009-03-10 17:57:48)

Time (s)	Query
0.00013	SET CHARSET latin2
0.00004	SET NAMES latin2
0.00095	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.143.218.115' WHERE u.id=1
0.00101	UPDATE punbb_online SET logged=1732256546 WHERE ident='3.143.218.115'
0.00059	SELECT * FROM punbb_online WHERE logged<1732256246
0.00077	DELETE FROM punbb_online WHERE ident='13.59.129.141'
0.00101	SELECT topic_id FROM punbb_posts WHERE id=113371
0.00290	SELECT id FROM punbb_posts WHERE topic_id=11400 ORDER BY posted
0.00079	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=11400 AND t.moved_to IS NULL
0.00012	SELECT search_for, replace_with FROM punbb_censoring
0.00165	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=11400 ORDER BY p.id LIMIT 25,25
0.00107	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=11400
Total query time: 0.01103 s

Forum Debian Users Gang

Ogłoszenie

#26 2009-03-10 12:21:53

ilin - Palacz

Re: Debian Sid - Brak czcionek

Kod:

Kod:

Kod:

#27 2009-03-10 14:46:36

jarek - Użytkownik

Re: Debian Sid - Brak czcionek

Kod:

Kod:

Kod:

Kod:

Kod:

Kod:

#28 2009-03-10 15:24:30

ilin - Palacz

Re: Debian Sid - Brak czcionek

#29 2009-03-10 16:01:44

jarek - Użytkownik

Re: Debian Sid - Brak czcionek

#30 2009-03-10 16:06:16

ilin - Palacz

Re: Debian Sid - Brak czcionek

#31 2009-03-10 16:52:55

jarek - Użytkownik

Re: Debian Sid - Brak czcionek

Kod:

#32 2009-03-10 17:50:14

ilin - Palacz

Re: Debian Sid - Brak czcionek

Stopka forum

Informacje debugowania