Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Zakupiłem kartę WinFast DTV1800 H, jest to karta cyfrowo- analogowa, głownie z nastawieniem na odbiór telewizji cyfrowej, ale po wpięciu kabla ze zwykłej anteny powinna odbierać to co jeszcze tam nadają.
Problem jest jednak taki, że mimo, iż karta jest chyba prawidłowo zainstalowana w systemie i widzi ją Kaffeine ( można ją w nim skonfigurować, tylko, że na razie telewizja cyfrowa DVB-T u mnie jeszcze nie działa). To jednak nie da się w ogóle oglądać niczego co jest nadawane analogowo. Kdetv pokazuje, że brak urządzenia, a w tvtime mam ciągle informację, że brak sygnału.
Co więc może być tego przyczyną, że karta jest niby zainstalowana ale nie działa?
Tvtime pokazuje:
[darek@Linux_Mandriva ~]$ tvtime -d /dev/video1 Uruchomione tvtime 1.0.2. Czytanie konfiguracji z /etc/tvtime/tvtime.xml Czytanie konfiguracji z /home/darek/.tvtime/tvtime.xml /home/darek/.tvtime/stationlist.xml: No existing PAL station list "custom". videoinput: Cannot open capture device /dev/video1: Nie ma takiego pliku ani katalogu Dziekujemy za używanie tvtime.
Poza tym używam mandrivy i jak wejdę w informacje o urządzeniach to pokazuje mi coś takiego:
Identyfikacja Dostawca: Conexant Systems, Inc. Opis: CX23880/1/2/3 PCI Video and Audio Decoder Klasa nośnika: Multimedia video controller Połączenie Szyna: PCI Zakres PCI: 0 Szyna PCI #: 5 Urządzenie PCI #: 0 Funkcja PCI #: 0 Przegląd PCI: 0x05 ID producenta: 0x14f1 ID urządzenia: 0x8800 ID poddostawcy: 0x107d ID urządzenia podrzędnego: 0x6654 Różne Moduł: cx8800
LSPCI pokazuje:
[darek@Linux_Mandriva ~]$ lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1) 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 05:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 05:00.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) 05:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 05:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) 05:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [darek@Linux_Mandriva ~]$
A lspci -n
[root@Linux_Mandriva darek]# lspci -n 00:00.0 0600: 8086:2e20 (rev 03) 00:01.0 0604: 8086:2e21 (rev 03) 00:1a.0 0c03: 8086:3a37 00:1a.1 0c03: 8086:3a38 00:1a.2 0c03: 8086:3a39 00:1a.7 0c03: 8086:3a3c 00:1b.0 0403: 8086:3a3e 00:1c.0 0604: 8086:3a40 00:1c.3 0604: 8086:3a46 00:1c.4 0604: 8086:3a48 00:1d.0 0c03: 8086:3a34 00:1d.1 0c03: 8086:3a35 00:1d.2 0c03: 8086:3a36 00:1d.7 0c03: 8086:3a3a 00:1e.0 0604: 8086:244e (rev 90) 00:1f.0 0601: 8086:3a18 00:1f.2 0101: 8086:3a20 00:1f.3 0c05: 8086:3a30 00:1f.5 0101: 8086:3a26 01:00.0 0300: 10de:0622 (rev a1) 03:00.0 0106: 197b:2363 (rev 02) 03:00.1 0101: 197b:2363 (rev 02) 04:00.0 0200: 10ec:8168 (rev 02) 05:00.0 0400: 14f1:8800 (rev 05) 05:00.1 0480: 14f1:8801 (rev 05) 05:00.2 0480: 14f1:8802 (rev 05) 05:01.0 0280: 13d0:2103 (rev 02) 05:07.0 0c00: 104c:8024 [root@Linux_Mandriva darek]#
Co do pliku /var/log/dmesg, wygląda on tak:
http://wklej.org/id/410793/
No i co tu jest nie tak? Karta jest chyba dobrze zainstalowana, ale czemu nie wykrywa jej ani kdetv ani tvtime?
Offline
Wszystkie [s]znaki[/s] logi wskazują na to ,że tu jest problem z firmware do tej karty.
cx88-mpeg driver manager 0000:05:00.2: firmware: requesting xc3028-v27.fw xc2028 3-0061: Error: firmware xc3028-v27.fw not found. cx88-mpeg driver manager 0000:05:00.2: firmware: requesting xc3028-v27.fw xc2028 3-0061: Error: firmware xc3028-v27.fw not found. xc2028 3-0061: Error on line 1135: -6
Spróbuj tego
http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware
Offline
Dobra napiszę po naszemu.
Wszystko robisz w jednym terminalu z konta użytkownika.
Ściągasz firmware wgetem
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
Rozpakowujesz.
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
Ściągasz wgetem skrypt generujący firmware
wget http://linuxtv.org/hg/v4l-dvb/raw-file/3919b17dc88e/linux/Documentation/video4linux/extract_xc3028.pl
Uruchamiasz skrypt.
perl extract_xc3028.pl
Teraz logujesz się na roota i kopiujesz wygenerowany firmware tam gdzie trzeba.
cp xc3028-v27.fw /lib/firmware
Robisz restart kompa i pokazujesz nam znów /var/log/dmesg.
Offline
No zrobiłem to wszystko i po restarcie kompa plik wygląda tak:
http://wklej.org/id/410866/
Tvtime dalej pokazuje, że brak sygnału.
Offline
Ciężka sprawa.
Błędu firmware już nie ma.
Ale coś tam z polączeniem ale tego nie jestem pewny.
Pokaż
ls /dev | grep video
Bo coś mi wygląda że urządzenie /dev/video0 się nie tworzy.
Offline
Coś takiego pokazuje:
[darek@Linux_Mandriva ~]$ ls /dev | grep video
video0[/quote]
Offline
A jednak jest.
Zainstaluj sobie program xawtv
Potem pokaż
xawtv -hwscan
Offline
po instalacji mam:
xawtv -hwscan
This is xawtv-3.95, running on Linux/i686 (2.6.33.7-desktop-2mnb)
looking for available devices
port 310-341
type : Xvideo, image scaler
name : NV17 Video Texture
/dev/video0: OK [ -device /dev/video0 ]
type : v4l2
name : Leadtek WinFast DTV1800 Hybrid
flags: capture tuner
[darek@Linux_Mandriva ~]$[/quote]
Offline
Karta jest poprawnie wykrywana ale czy działa to już zależy czy stery są dobre.
Teraz zrób
scantv -c /dev/video0 -C /dev/vbi0
Zaznacz PAL -DK potem europe-west i zobacz czy złapie jakiś kanał
Offline
[darek@Linux_Mandriva ~]$ scantv -c /dev/video0 -C /dev/vbi0 please select your TV norm 0: NTSC-M 1: NTSC-M-JP 2: NTSC-443 3: PAL-BG 4: PAL-I 5: PAL-DK 6: PAL-M 7: PAL-N 8: PAL-Nc 9: PAL-60 10: SECAM-B 11: SECAM-G 12: SECAM-H 13: SECAM-DK 14: SECAM-L nr ? 5 please select a frequency table 0: us-bcast 1: us-cable 2: us-cable-hrc 3: japan-bcast 4: japan-cable 5: europe-west 6: europe-east 7: italy 8: newzealand 9: australia 10: ireland 11: france 12: china-bcast 13: southafrica 14: argentina 15: australia-optus 16: russia nr ? 5 [global] freqtab = europe-west [defaults] input = Television norm = PAL-DK scanning channel list europe-west... E2 ( 48.25 MHz): no station E3 ( 55.25 MHz): no station E4 ( 62.25 MHz): no station S01 ( 69.25 MHz): no station S02 ( 76.25 MHz): no station S03 ( 83.25 MHz): no station E5 (175.25 MHz): no station E6 (182.25 MHz): no station E7 (189.25 MHz): no station E8 (196.25 MHz): no station E9 (203.25 MHz): no station E10 (210.25 MHz): no station E11 (217.25 MHz): no station E12 (224.25 MHz): no station SE1 (105.25 MHz): no station SE2 (112.25 MHz): no station SE3 (119.25 MHz): no station SE4 (126.25 MHz): no station SE5 (133.25 MHz): no station SE6 (140.25 MHz): no station SE7 (147.25 MHz): no station SE8 (154.25 MHz): no station SE9 (161.25 MHz): no station SE10 (168.25 MHz): no station SE11 (231.25 MHz): no station SE12 (238.25 MHz): no station SE13 (245.25 MHz): no station SE14 (252.25 MHz): no station SE15 (259.25 MHz): no station SE16 (266.25 MHz): no station SE17 (273.25 MHz): no station SE18 (280.25 MHz): no station SE19 (287.25 MHz): no station SE20 (294.25 MHz): no station S21 (303.25 MHz): no station S22 (311.25 MHz): no station S23 (319.25 MHz): no station S24 (327.25 MHz): no station S25 (335.25 MHz): no station S26 (343.25 MHz): no station S27 (351.25 MHz): no station S28 (359.25 MHz): no station S29 (367.25 MHz): no station S30 (375.25 MHz): no station S31 (383.25 MHz): no station S32 (391.25 MHz): no station S33 (399.25 MHz): no station S34 (407.25 MHz): no station S35 (415.25 MHz): no station S36 (423.25 MHz): no station S37 (431.25 MHz): no station S38 (439.25 MHz): no station S39 (447.25 MHz): no station S40 (455.25 MHz): no station S41 (463.25 MHz): no station 21 (471.25 MHz): no station 22 (479.25 MHz): no station 23 (487.25 MHz): no station 24 (495.25 MHz): no station 25 (503.25 MHz): no station 26 (511.25 MHz): no station 27 (519.25 MHz): no station 28 (527.25 MHz): no station 29 (535.25 MHz): no station 30 (543.25 MHz): no station 31 (551.25 MHz): no station 32 (559.25 MHz): no station 33 (567.25 MHz): no station 34 (575.25 MHz): no station 35 (583.25 MHz): no station 36 (591.25 MHz): no station 37 (599.25 MHz): no station 38 (607.25 MHz): no station 39 (615.25 MHz): ??? [unknown (39)] channel = 39 40 (623.25 MHz): no station 41 (631.25 MHz): no station 42 (639.25 MHz): no station 43 (647.25 MHz): no station 44 (655.25 MHz): no station 45 (663.25 MHz): no station 46 (671.25 MHz): no station 47 (679.25 MHz): no station 48 (687.25 MHz): no station 49 (695.25 MHz): no station 50 (703.25 MHz): no station 51 (711.25 MHz): no station 52 (719.25 MHz): no station 53 (727.25 MHz): no station 54 (735.25 MHz): no station 55 (743.25 MHz): no station 56 (751.25 MHz): ??? [unknown (56)] channel = 56 57 (759.25 MHz): no station 58 (767.25 MHz): ??? [unknown (58)] channel = 58 59 (775.25 MHz): no station 60 (783.25 MHz): no station 61 (791.25 MHz): no station 62 (799.25 MHz): no station 63 (807.25 MHz): no station 64 (815.25 MHz): no station 65 (823.25 MHz): no station 66 (831.25 MHz): no station 67 (839.25 MHz): no station 68 (847.25 MHz): no station 69 (855.25 MHz): no station [darek@Linux_Mandriva ~]$
Offline
No przecież działa.
masz stacje na 39 56 i 58 kanale
Offline
[darek@Linux_Mandriva ~]$ xawtv -c /dev/video0
This is xawtv-3.95, running on Linux/i686 (2.6.33.7-desktop-2mnb)
xinerama 0: 1680x1050+0+0
WARNING: No DGA direct video mode for this display.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Missing charsets in String to FontSet conversion
Warning: Missing charsets in String to FontSet conversion
Warning: Missing charsets in String to FontSet conversion
[darek@Linux_Mandriva ~]$[/quote]
nic nie wyszukuje
Offline
Spróbuj tak odpalić.
xawtv -c /dev/video0 -nodga
Offline
[darek@Linux_Mandriva ~]$ xawtv -c /dev/video0 -nodga This is xawtv-3.95, running on Linux/i686 (2.6.33.7-desktop-2mnb) xinerama 0: 1680x1050+0+0 WARNING: No DGA direct video mode for this display. /dev/video0 [v4l2]: no overlay support v4l-conf had some trouble, trying to continue anyway Warning: Missing charsets in String to FontSet conversion Warning: Missing charsets in String to FontSet conversion Warning: Missing charsets in String to FontSet conversion
Offline
Jaką masz kartę GRAFICZNĄ i jakie sterowniki? Błąd "no overlay support" może być związany z wadliwym działaniem sterów do grafiki
Offline
Wklep w terminal z konta użytkownika
echo tv=device=/dev/video0:driver=v4l2:outfmt=yuy2:normid=5:fps=25:width=768:height=578:brightness=20:contrast=0:saturation=100:channels=56-TVP1,39-TVP2,58-POLSAT >> ~/.mplayer/config
Potem wklep
mplayer tv://
Offline
Wiem że karta już działa.
Mplayer ją ożywił :)
Tak więc uważam że problem został rozwiązany.
Offline
Problem rozwiązany. tv działa, bardzo dziękuję koledze za pomoc bo sam bym sobie chyba nie poradził.
Offline
Odświeżam temat. Zmieniłem dystrybucję na Kubuntu 10.10 i niestety karta chodzi, ale nie mam dźwięku. Poprzednio na Mandrivie miałem ustawioną Alsę i było ok, tutaj ciężko mi się w tym Kubuntu połapać, czy w Tvtime nie mam dźwięku dlatego, że w systemie mi działa pulseaudio?
Offline
Z mojego doświadczenia wynika, ze nie ma takiego źródła dźwięku, którego PulseAudio w Ubuntu nie potrafi spier*
A co do Tvtime - to dźwięk idzie kablem, czy przez soxa?
W Mplayerze to samo, też nie ma dźwięku?
Offline
W mplayerze też nie ma dźwięku, konsola pokazuje takie coś:
darek@kubuntu-pc:~$ mplayer tv://
MPlayer 1.0rc4-4.4.5 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: Leadtek WinFast DTV1800 Hybrid
Tuner cap: STEREO LANG1 LANG2
Tuner rxs: MONO
Capabilites: video capture VBI capture device tuner read/write streaming
supported norms: 0 = NTSC-M; 1 = NTSC-M-JP; 2 = NTSC-443; 3 = PAL-BG; 4 = PAL-I; 5 = PAL-DK; 6 = PAL-M; 7 = PAL-N; 8 = PAL-Nc; 9 = PAL-60; 10 = SECAM-B; 11 = SECAM-G; 12 = SECAM-H; 13 = SECAM-DK; 14 = SECAM-L;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: BGR24
v4l2: current audio mode is : MONO
TV channel names detected.
Selected channel: 56 - TVP1 (freq: 751.250)
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: No such file or directory.
[VO_3DFX] Unable to open /dev/3dfx.
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
Movie-Aspect is undefined - no prescaling applied.
VO: [vdpau] 768x576 => 768x576 Packed YUY2
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
==========================================================================
Audio: no sound
Starting playback...
TV input is not seekable! (Seeking will probably be for changing channels ;)
No bind found for key 'MOUSE_BTN3'.-MOUSE_BTN3_DBL
No bind found for key 'MOUSE_BTN3_DBL'.
No bind found for key 'MOUSE_BTN2'.
v4l2: 328 frames successfully processed, 75 frames dropped.
Exiting... (Quit)
darek@kubuntu-pc:~$[/quote]
Co do podpięcia to ja mam na zewnątrz karty podpięte takim kabelkiem do gniazda w karcie dźwiękowej. Wcześniej miałem mandrive i na niej tak było podpięte i dźwięk był.
Offline
Pokaż
amixer scontents
Offline
darek@kubuntu-pc:~$ amixer scontents
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 23 [74%] [0.00dB] [off]
Front Right: Playback 23 [74%] [0.00dB] [off]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 23 [74%] [0.00dB] [off]
Front Right: Playback 23 [74%] [0.00dB] [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined penum
Playback channels: Mono
Capture channels: Mono
Mono: Playback [on] Capture [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 46 [100%] [30.00dB] [on]
Front Right: Capture 46 [100%] [30.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '6ch' '8ch'
Item0: '6ch'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
darek@kubuntu-pc:~$[/quote]
Offline
A głośność wejścia audio karty dźwiękowej ustawiona, czy może tym razem Pulseaudio nie obsługuje wejścia dźwięku?
Poza tym przez 3 lata z Ubuntu nigdy nie używałem Pulseaudio - zawsze wywalałem go natychmiast po instalacji. W tym czasie nie zdarzyło się, żeby u mnie Pulseaudio działało poprawnie, zawsze były z nim problemy.
Co do problemów z PA na Ubuntu radziłbym zapytać na forum.ubuntu.pl.
Albo po prostu wywalić Pulseaudio, i zostać na Alsie, - wtedy najprawdopodobniej będzie działało.
To by było na tyle
;-)
Offline
Musisz pobawić się alsamixerem.
Puść sobie jakiś program z tv i w terminalu odpal alsamixer i kombinuj.
Mono: Playback [on] Capture [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 46 [100%] [30.00dB] [on]
Front Right: Capture 46 [100%] [30.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Channel Mode',0[/quote]
Widzisz masz tam wiele przełaczników powyłaczanych.
Ja nie wiem który to ma być bo każda karta ma inaczej więc musisz pokombinować.
Te przełączniki przełączasz klawiszem [b]m[/b] na klawiaturze.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
Time (s) | Query |
---|---|
0.00009 | SET CHARSET latin2 |
0.00003 | SET NAMES latin2 |
0.00099 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.147.43.164' WHERE u.id=1 |
0.00066 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.147.43.164', 1734000144) |
0.00065 | SELECT * FROM punbb_online WHERE logged<1733999844 |
0.00076 | DELETE FROM punbb_online WHERE ident='54.36.148.135' |
0.00044 | SELECT topic_id FROM punbb_posts WHERE id=159735 |
0.00010 | SELECT id FROM punbb_posts WHERE topic_id=17645 ORDER BY posted |
0.00055 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=17645 AND t.moved_to IS NULL |
0.00005 | SELECT search_for, replace_with FROM punbb_censoring |
0.00108 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=17645 ORDER BY p.id LIMIT 0,25 |
0.00082 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=17645 |
Total query time: 0.00622 s |