Forum Debian Users Gang

Witam wszystkich ...

Od dwóch dni próbuje odpalić neo modem Thomson Speedtoch 330 pod Debian Sarge z jądrem 2.6.8-7k.
Korzystałem z opisu http://speedtouchconf.sourceforge.net/  i niestety nie rozumiem już coś jest nie tak. Poniżej historia > :)

************************************************
*                                              *
*       speedtouchconf.sh by Steve Parker      *
*                                              *
*    http://speedtouchconf.sourceforge.net/    *
* based on speedtouch.sourceforge.net project  *
*                                              *
************************************************

If you have any problems with this script, mail me
(steve at steve-parker dot org) with the files
/tmp/speedtouch.txt and /var/log/messages for diagnosis.
Using speedtouch-1.3-sgp
microcode is alcaudsl.sys mgmt.o
Using alcaudsl.sys for microcode
  PPP Version 2.4.3 should be 2.4.0 or 2.4.1
  Linux kernel version 2.6.8 okay.
Not ready to install the software at this time. - code 1
debian:/neostrada/speedtouchconf-10-Nov-2004#

////////////////////////////////////////////////////////////////////////////////////////////

teraz logi ;)

Starting speedtouchconf.sh script
Version 10.11.2004
sob lis  5 16:32:52 CET 2005
Called as ./speedtouchconf.sh from /neostrada/speedtouchconf-10-Nov-2004
Using speedtouch-1.3-sgp
Linux debian 2.6.8-2-k7 #1 Thu May 19 18:03:29 JST 2005 i686 GNU/Linux
Using Tarball speedtouch-1.3-sgp.tar.gz
  PPP Version 2.4.3 should be 2.4.0 or 2.4.1
--- Environment ---
BASH=/bin/bash
BASH_VERSINFO=([0]="2" [1]="05b" [2]="0" [3]="1" [4]="release" [5]="i386-pc-linux-gnu")
BASH_VERSION='2.05b.0(1)-release'
COLORTERM=gnome-terminal
DESKTOP_SESSION=kde
DIRSTACK=()
DISPLAY=:0.0
EUID=0
FUNCNAME=get_microcode
GDMSESSION=kde
GDM_XSERVER_LOCATION=local
GROUPS=()
GS_LIB=/home/pawel/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/pawel/.gtkrc-2.0:/home/pawel/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/pawel/.gtkrc:/home/pawel/.kde/share/config/gtkrc
HOME=/root
HOMEDIR=.
HOSTNAME=debian
HOSTTYPE=i386
IFS=$' tn'
INITSCRIPT=/neostrada/speedtouchconf-10-Nov-2004/speedtouch-init
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.8-2-k7
KERNEL_MAJOR=2.6
KERNEL_MINOR=8
LANG=pl_PL
LANGUAGE=pl_PL:pl:en_GB:en
LOGFILE=/tmp/speedtouch.txt
LOGNAME=pawel
LSPCI=lspci
MACHTYPE=i386-pc-linux-gnu
MICROCODE=/etc/ppp/alcaudsl.sys
MODEM_RUN=/usr/local/sbin/modem_run
OLDPWD=/neostrada/speedtouchconf-10-Nov-2004
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/bin/X11:/usr/local/sbin:/usr/local/bin
PIPESTATUS=([0]="0")
PPID=5144
PPPD=pppd
PPP_VERSION=2.4.3
PREFIX=/
PS4='+ '
PWD=/neostrada/speedtouchconf-10-Nov-2004
QUIET=YES
SESSION_MANAGER=local/debian:/tmp/.ICE-unix/4849
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments
SHLVL=5
SPEEDTOUCH=speedtouch-1.3-sgp
SSH_AGENT_PID=4800
SSH_AUTH_SOCK=/tmp/ssh-kGunuW4732/agent.4732
TARBALL=speedtouch-1.3-sgp.tar.gz
TERM=xterm
TEXTDOMAIN=speedtouchconf.sh
TEXTDOMAINDIR=/neostrada/speedtouchconf-10-Nov-2004/po
TWO_FOUR_OR_NEWER=1
UID=0
UNAME=uname
USB_TYPE=EHCI
USER=root
USERNAME=pawel
VERSION=10.11.2004
WINDOWID=31457347
XAUTHORITY=/tmp/libgksu1.2-jWzXzS/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_='--- Environment ---'
alcatel_inside=0
error=1
missing_binaries=
required_binary=bc
unrequired_files=/usr/sbin/speedmgmt
add_line ()
{
    grep -q "$1" $3 || echo "$2" >>$3
}
check_330 ()
{
    echo "Using $SPEEDTOUCH" | tee -a $LOGFILE
}
check_config ()
{
    $UNAME -a >>$LOGFILE;
    $UNAME -a | grep -qi Linux;
    if [ "$?" -ne "0" ]; then
        echo "Sorry, this script only supports the GNU/Linux operating system.";
        echo "FreeBSD support is planned for the distant future.";
        echo "If you want to help support of another OS, please contact me at";
        echo "steve at steve-parker dot org";
        exit 1;
    fi;
    missing_binaries="";
    uname -a | grep "mdk" >/dev/null 2>&1;
    if [ "$?" -eq "0" ]; then
        LSPCI=lspcidrake;
    fi;
    for required_binary in $PPPD $LSPCI $UNAME tar cp rm gcc make mkdir ls cat chown chmod read ping ifconfig bc;
    do
        type ${required_binary} >/dev/null 2>&1;
        if [ "$?" -ne "0" ]; then
            echo "Error: Cannot find ${required_binary}.";
            echo "Error: Cannot find ${required_binary} in $PATH" >>$LOGFILE;
            missing_binaries="$missing_binaries $required_binary";
        fi;
    done;
    alcatel_inside=0;
    for unrequired_files in /usr/sbin/speedmgmt;
    do
        if [ -f ${unrequired_files} ]; then
            echo "You have the Thomson drivers installed.";
            echo "These are not required by this speedtouch usermode driver.";
            ps -eaf | grep -w speed[m]gmt >/dev/null 2>&1;
            if [ "$?" -eq "0" ]; then
                echo "The Thomson speedmgmt driver seems to be running.";
                echo "Please "pkill speedmgmt" driver before proceeding.";
                alcatel_inside=1;
            else
                echo "Fortunately, the Thomson speedmgmt daemon";
                echo "does not appear to be running.";
            fi;
        fi;
    done;
    lsmod | grep -w "^speedtch" >/dev/null 2>&1;
    if [ "$?" -eq "0" ]; then
        echo "The kernel speedtch module is loaded. This is not";
        echo "compatible with the speedtouch usermode driver.";
        echo "Removing the speedtch module";
        rmmod speedtch;
        if [ "$?" -eq "0" ]; then
            alcatel_inside=0;
        else
            echo "Failed to remove the speedtch module - please do this by hand.";
        fi;
    fi;
    if [ "$alcatel_inside" -ne "0" ]; then
        exit 1;
    fi;
    mkdir -p /etc/ppp >/dev/null 2>&1;
    if [ "$PREFIX" != "/" ]; then
        echo "Using prefix of $PREFIX - note that this is untested!";
        mkdir -p $PREFIX 2>/dev/null;
    fi;
    get_microcode `ls speedmgmt.tar.gz mgmt.o alcaudsl.sys *zip *ZIP 2>/dev/null`;
    if [ -f ${SPEEDTOUCH}.tar.bz2 ]; then
        TARBALL=${SPEEDTOUCH}.tar.bz2;
        type bzcat >/dev/null 2>&1;
        if [ "$?" -ne "0" ]; then
            echo "You have supplied the .tar.bz2 version, but do not have bzcat installed.";
            echo "Please download the .tar.gz version from http://speedtouch.sf.net/";
            echo "or install bzcat on your system.";
        fi;
    else
        if [ -f ${SPEEDTOUCH}.tar.gz ]; then
            TARBALL=${SPEEDTOUCH}.tar.gz;
        else
            echo "Cannot find ${SPEEDTOUCH} tarball (tried .tar.gz and .tar.bz2)" | tee -a $LOGFILE;
            exit 1;
        fi;
    fi;
    echo "Using Tarball $TARBALL" >>$LOGFILE;
    error=0;
    PPP_VERSION=`$PPPD --version 2>&1 | grep "^pppd version" | tr '[a-z]' ' ' | awk '{ print $1 }'`;
    KERNEL=`$UNAME -r`;
    KERNEL_MAJOR=`echo $KERNEL | cut -d"." -f1,2`;
    KERNEL_MINOR=`echo $KERNEL |sed s/"[a-z]"/"."/g|sed s/"[A-Z]"/"."/g|tr '-' '.' | cut -d"." -f3`;
    TWO_FOUR_OR_NEWER=`echo "$KERNEL_MAJOR >= 2.4" | bc`;
    USB_TYPE=`$LSPCI -v |grep -i usb|grep HCI`;
    if [ -z "${USB_TYPE}" ]; then
        USB_TYPE=`$LSPCI |grep "HCI Host Controller"`;
    fi;
    if [ "${PPP_VERSION}" == "2.4.0" ] || [ "${PPP_VERSION}" == "2.4.1" ] || [ "${PPP_VERSION}" == "2.4.2" ]; then
        echo "  PPP version $PPP_VERSION okay.";
    else
        echo "  PPP Version ${PPP_VERSION} should be 2.4.0 or 2.4.1" | tee -a $LOGFILE;
        error=`expr $error + 1`;
    fi;
    if [ "$TWO_FOUR_OR_NEWER" == "0" ]; then
        if [ "$KERNEL_MAJOR" == "2.2" ] && [ "$KERNEL_MINOR" -ge "18" ]; then
            echo "With the 2.2.18 kernel you should get away with $PPP_VERSION" | tee -a $LOGFILE;
            echo "... maybe." | tee -a $LOGFILE;
        else
            echo "You probably need the HDLC kernel patch n_hdlc.c.diff" | tee -a $LOGFILE;
            error=`expr $error + 4`;
        fi;
    else
        echo "  Linux kernel version ${KERNEL_MAJOR}.${KERNEL_MINOR} okay.";
    fi;
    if [ -z "${USB_TYPE}" ]; then
        echo "No USB Bus found!" | tee -a $LOGFILE;
        error=`expr $error + 2`;
    fi;
    echo ${USB_TYPE} | grep -q EHCI;
    if [ "$?" -eq "0" ]; then
        USB_TYPE=EHCI;
    fi;
    echo ${USB_TYPE} | grep -q UHCI;
    if [ "$?" -eq "0" ]; then
        USB_TYPE=UHCI;
    fi;
    echo ${USB_TYPE} | grep -q OHCI;
    if [ "$?" -eq "0" ]; then
        USB_TYPE=OHCI;
    fi;
    ls -l /dev/ppp | grep -wq 108;
    if [ "$?" -ne "0" ]; then
        cd /dev;
        ./MAKEDEV ppp;
        if [ "$?" -ne "0" ]; then
            echo "MAKEDEV failed" | tee -a $LOGFILE;
            error=`expr $error + 16`;
        fi;
    fi;
    ls -l /dev/ppp | grep -wq 108;
    if [ "$?" -ne "0" ]; then
        echo "/dev/ppp cannot be created, or is not device 108";
        error=`expr $error + 32`;
    fi;
    if [ "`id -u`" != "0" ]; then
        echo "You must be logged in as root to use this script";
        exit 1;
    fi;
    if [ ! -z "$missing_binaries" ]; then
        echo "ERROR:";
        echo "Some required files are not installed: ";
        echo $missing_binaries;
        echo "Please install these (from your Linux install media,
or the internet) before you can configure and install
the speedtouch software.
Please check the PATH environment variable, and that you are running
as root. Your PATH variable is currently:";
        echo $PATH;
        exit 1;
    fi;
    echo "--- Environment ---" >>$LOGFILE;
    set >>$LOGFILE;
    echo "--- End of Environment ---" >>$LOGFILE
}
check_err ()
{
    if [ "$1" -ne "0" ]; then
        echo "$2 - FAILED" | tee -a $LOGFILE;
        echo "Please check $3 for errors" | tee -a $LOGFILE;
        echo "--- $3 starts ---" >>$LOGFILE;
        cat $3 >>$LOGFILE;
        echo "--- $3 ends ---" >>$LOGFILE;
        exit 1;
    else
        echo "$2 - SUCCESS" | tee -a $LOGFILE;
    fi
}
check_resolv_conf ()
{
    if [ -f /etc/resolv.conf ]; then
        mv /etc/resolv.conf /etc/resolv.conf.orig;
    fi;
    cd /etc;
    ln -sf ppp/resolv.conf resolv.conf;
    ping -c1 www.google.com >/dev/null;
    if [ "$?" -eq "0" ]; then
        echo "Fixed DNS ... it's working!" | tee -a $LOGFILE;
    else
        echo "Looks like /etc/ppp/resolv.conf is wrong." | tee -a $LOGFILE;
        echo "You need to check the DNS configuration." | tee - a $LOGFILE;
        echo "Look in /var/log/messages to see if DNS was configured." | tee -a $LOGFILE;
        DNS=NOTOK;
    fi
}
check_router ()
{
    route=`netstat -rn|grep "^0.0.0.0"|awk '{ print $2 }'`;
    if [ ! -z "${route}" ]; then
        echo "You have a default router : $route (removing it for you!)" | tee -a $LOGFILE;
        route delete default gw $route;
    fi
}
create_ppp_files ()
{
    echo "Creating ppp files in $PREFIX/etc/ppp" | tee -a $LOGFILE;
    cd $PREFIX/etc/ppp;
    mv options options.bak 2>/dev/null;
    cat - >options  <<EOF
#------------------ /etc/ppp/options Beginning -------------
noauth
usepeerdns
lock
noipdefault
#------------------ /etc/ppp/options End ------------------
EOF

    mkdir peers 2>/dev/null;
    cat - >peers/adsl  <<EOF
#-------------------/etc/ppp/peers/adsl Beginning------------
debug
kdebug 1
noipdefault
defaultroute
EOF

    echo ${KERNEL_VERSION} | grep "^2.6." >/dev/null 2>&1;
    if [ "$?" -eq "0" ]; then
        echo "pty "/usr/local/sbin/pppoa3 -e 1 -m -1 -c -vpi $VPI -vci $VCI"" >>peers/adsl;
    else
        echo "pty "/usr/local/sbin/pppoa3 -m -1 -c -vpi $VPI -vci $VCI"" >>peers/adsl;
    fi;
    echo "sync" >>peers/adsl;
    echo "user "$ISP_LOGIN"" >>peers/adsl;
    cat - >>peers/adsl  <<EOF
noauth
noaccomp
nopcomp
noccp
novj
holdoff 4
persist
maxfail 25
usepeerdns
#------------------/etc/ppp/peers/adsl EOF------------------
EOF

    grep -v "Added by speedtouchconf" chap-secrets >chap-secrets.new;
    grep -v "Added by speedtouchconf" pap-secrets >pap-secrets.new;
    echo ""$ISP_LOGIN" "*" "$ISP_PASSWORD" "*" # Added by speedtouchconf" >>chap-secrets.new;
    echo ""$ISP_LOGIN" "*" "$ISP_PASSWORD" "*" # Added by speedtouchconf" >>pap-secrets.new;
    mv chap-secrets.new chap-secrets;
    mv pap-secrets.new pap-secrets;
    chown root pap-secrets chap-secrets;
    chmod 600 pap-secrets chap-secrets;
    ls -l /etc/ppp/peers/adsl /etc/ppp/*-secrets /etc/ppp/options >>$LOGFILE
}
do_modprobe ()
{
    echo "Doing modprobes ... " >>$LOGFILE;
    modprobe ppp_generic | tee -a $LOGFILE;
    modprobe ppp_synctty | tee -a $LOGFILE;
    modprobe n_hdlc | tee -a $LOGFILE;
    modprobe usbcore | tee -a $LOGFILE;
    lsmod | grep -w usbcore >/dev/null 2>&1;
    if [ "$?" -eq "0" ]; then
        LOAD_USBCORE=1;
    else
        LOAD_USBCORE=0;
    fi;
    mount none /proc/bus/usb -t usbdevfs >/dev/null 2>&1;
    if [ "$USB_TYPE" == "UHCI" ]; then
        USB_INTERFACE=usb-uhci;
        modprobe usb-uhci | tee -a $LOGFILE;
        if [ "$?" -ne "0" ]; then
            USB_INTERFACE=uhci;
            modprobe uhci | tee -a $LOGFILE;
        fi;
    else
        modprobe usb-ohci | tee -a $LOGFILE;
        USB_INTERFACE=usb-ohci;
    fi;
    echo "lsmod output:" >>$LOGFILE;
    lsmod >>$LOGFILE;
    echo "df -k : " >>$LOGFILE;
    df -k >>$LOGFILE
}
explain_modem_run ()
{
    echo "modem_run results:";
    case $1 in
        255)
            echo "Must be run with root priveleges"
        ;;
        254)
            echo "Usage error (probably a bug in speedtouchconf.sh)"
        ;;
        253)
            echo "Modem not found where expected"
        ;;
        251)
            echo "pusb_set_configuration error - ";
            echo "  please report error to speedtouch.sourceforge.net"
        ;;
        250)
            echo "Failed to load microcode - this is not a problem if you
have already loaded the microcode.
The microcode can only be loaded once per system boot;
We'll assume that the microcode is already loaded, and
not call this an error.
You may encounter problems, though.";
            echo "If you get a message to check your password, and your
password is definitely correct, switch off the PC, disconnect the
modem for a few seconds, re-connect, switch on, remove the speedtch
module if it is loaded, and try again."
        ;;
        243 | 237 | 252 | 248 | 249)
            echo "Error $1 - It may be that another device/program is";
            echo "already accessing the modem"
        ;;
        246)
            echo "Error initiating modem synchronisation"
        ;;
        245)
            echo "Failed to open EP_CODE endpoint"
        ;;
        244)
            echo "pusb_endpoint_open EP_INT (whatever that means)";
            echo "  please report error to speedtouch.sourceforge.net"
        ;;
        242)
            echo "Error in fork_interrupt_daemon (handle_endpoint_int) (?) - Anyone able to explain this to Steve?"
        ;;
        241)
            echo "No SpeedTouch Modem Found"
        ;;
        240)
            echo "Unable to locate firmware";
            echo "If you have a silver modem, make sure you're using rev4fw.zip";
            echo "http://speedtouchconf.sourceforge.net/rev4fw.zip"
        ;;
        239)
            echo "Unable to locate bootcode in firmware"
        ;;
        238)
            echo "Unable to locate main firmware code in firmware"
        ;;
        *)
            echo "Unknown error - $1"
        ;;
    esac;
    return $1
}
get_microcode ()
{
    if [ -z "$1" ] || [ ! -f $1 ]; then
        echo "ERROR: Cannot find microcode" | tee -a $LOGFILE;
        echo "Please place a copy of the Microcode in this directory.";
        echo "This could be :";
        echo "  - the speedmgmt.tar.gz file from http://www.speedtouchdsl.com/dvrreg_lx.htm";
        echo "  - mgmt.o from speedmgmt.tar.gz";
        echo "  - alcaudsl.sys from the Windows software (Eg C:\WINDOWS\SYSTEM\ALCAUDSL.SYS)";
        echo "  - a .ZIP file (eg ZZZP1.ZIP) from the Windows software";
        echo "Due to the license, you must obtain this file for yourself.";
        exit 3;
    fi;
    echo "microcode is $@";
    case "$1" in
        "speedmgmt.tar.gz")
            echo "Using $1 for microcode";
            tar xzf speedmgmt.tar.gz;
            MICROCODE=/etc/ppp/mgmt.o;
            cp mgmt/mgmt.o $MICROCODE;
            rm -rf mgmt
        ;;
        "mgmt.o")
            echo "Using $1 for microcode";
            MICROCODE=/etc/ppp/mgmt.o;
            cp mgmt.o $MICROCODE
        ;;
        "ALCAUDSL.SYS")
            echo "Using $1 for microcode";
            MICROCODE=/etc/ppp/alcaudsl.sys;
            cp ALCAUDSL.SYS /etc/ppp/alcaudsl.sys
        ;;
        "alcaudsl.sys")
            echo "Using $1 for microcode";
            MICROCODE=/etc/ppp/alcaudsl.sys;
            cp alcaudsl.sys /etc/ppp/alcaudsl.sys
        ;;
        *)
            echo $1 | grep ".ZIP$" >/dev/null;
            if [ "$?" -eq "0" ]; then
                zip=`basename $1 .ZIP`.zip;
            else
                zip=`basename $1 .zip`;
            fi;
            zipfiles=`unzip -o ${zip}.zip 2>&1|grep "inflating: "| awk '{ print $2}'`;
            MICROCODE=/etc/ppp/microcode.dat;
            cat ${zipfiles} >/etc/ppp/microcode.dat;
            if [ ! -s ${MICROCODE} ]; then
                echo "Error: No files found in ZIP file $1";
                exit 1;
            fi;
            echo "ZIP: Using Zipfile $zip (containing $zipfiles) for microcode.dat" >>$LOGFILE
        ;;
    esac
}
get_tarball ()
{
    echo "$TARBALL" | grep -q "gz$";
    if [ "$?" -eq "0" ]; then
        tar -xzf $TARBALL;
        cd `basename $TARBALL .tar.gz`;
    else
        bzcat $TARBALL | tar -xf -;
        cd `basename $TARBALL .tar.bz2`;
    fi;
    if [ "$PREFIX" != "/" ]; then
        config="./configure --prefix $PREFIX/usr";
    else
        config="./configure";
    fi;
    echo "Configuring SpeedTouch Driver..." | tee -a $LOGFILE;
    if [ "$QUIET" == "YES" ]; then
        $config >/tmp/speedtouch.config.txt 2>&1;
        res=$?;
    else
        $config | tee /tmp/speedtouch.config.txt;
        res=$?;
    fi;
    check_err $res "Software Configuration" /tmp/speedtouch.config.txt;
    echo "Building SpeedTouch Driver..." | tee -a $LOGFILE;
    if [ "$QUIET" == "YES" ]; then
        make >/tmp/speedtouch.make.txt 2>&1;
        res=$?;
    else
        make | tee /tmp/speedtouch.make.txt;
        res=$?;
    fi;
    check_err $res "Software Build" /tmp/speedtouch.make.txt;
    echo "Installing SpeedTouch Driver..." | tee -a $LOGFILE;
    if [ "$QUIET" == "YES" ]; then
        make install >/tmp/speedtouch.make.install.txt;
        res=$?;
    else
        make install | tee /tmp/speedtouch.make.install.txt;
        res=$?;
    fi;
    check_err $res "Software Installation" /tmp/speedtouch.make.install.txt;
    rm -rf /tmp/speedtouch.$$
}
modify_modules_conf ()
{
    if [ -f /etc/modules.conf ]; then
        MODCONF=$PREFIX/etc/modules.conf;
    else
        MODCONF=$PREFIX/etc/conf.modules;
    fi;
    echo "Original modules.conf: " >>$LOGFILE;
    cat $MODCONF >>$LOGFILE;
    add_line "ppp_generic" "alias char-major-108  ppp_generic" $MODCONF;
    add_line "dev/ppp" "alias /dev/ppp ppp_generic" $MODCONF;
    add_line "ppp_async" "alias tty-ldisc-3 ppp_async" $MODCONF;
    add_line "n_hdlc" "alias tty-ldisc-13 n_hdlc" $MODCONF;
    add_line "ppp_synctty" "alias tty-ldisc-14 ppp_synctty" $MODCONF;
    add_line "bsd_comp" "alias ppp-compress-21 bsd_comp" $MODCONF;
    add_line "ppp-compress-24" "alias ppp-compress-24 ppp_deflate" $MODCONF;
    add_line "ppp-compress-26" "alias ppp-compress-26 ppp_deflate" $MODCONF;
    echo "--- New modules.conf: " >>$LOGFILE;
    cat $MODCONF >>$LOGFILE;
    echo "--- end of new modules.conf" >>$LOGFILE
}
select_options ()
{
    ans="N";
    while [ "$ans" != "Y" ]; do
        echo "*******************************************";
        echo "*                                         *";
        echo "*     Please select your ISP Settings     *";
        echo "*                                         *";
        echo "*******************************************";
        echo;
        echo "  Country/ISP            VPI    VCI";
        cat -  <<EOF
  Belgium, ?              8     35
  Denmark, Orang          8     35
  France, wanado          8     35
  France, ?              8     67
  Italy, ?              8     35
  Netherlands, ?          8     48
  Netherlands              0     35
  Poland (NeoStrada)      0     35
  UK, Any                 0     38
  US, BellSouth              8     35
  Singapore Pacificnet    0    100
EOF

        echo "Please type your VPI VCI numbers (eg, 0 35 for Neostrada, Poland)";
        read VPI VCI;
        echo "Please enter your ISP Login ID (eg another@hg1.btinternet.com)";
        read ISP_LOGIN;
        echo "Please enter your ISP Password";
        read ISP_PASSWORD;
        echo "Settings: ";
        echo "  VPI / VCI : $VPI / $VCI";
        echo "  Login     : $ISP_LOGIN";
        echo "  Password  : $ISP_PASSWORD";
        echo "Are these correct? (Y/N)";
        read ans;
        ans=`echo ${ans}N|tr '[a-z]' '[A-Z]'|cut -c1`;
    done;
    echo "VPI: $VPI VCI: $VCI" >>$LOGFILE
}
setup_etc_conf ()
{
    CONF=$PREFIX/etc/speedtouch.conf;
    echo "# SpeedTouch Config File" >$CONF;
    echo "# Created by speedtouchconf.sf.net version $VERSION" >>$CONF;
    echo "# The speedtouch rc script assumes /usr/local/sbin is in the path..." >>$CONF;
    echo "# It does a ". /etc/speedtouch.conf", so we can just add it to the PATH here." >>$CONF;
    echo "PATH=/usr/local/sbin:$PATH" >>$CONF;
    echo "# LOAD_ directives should be 1 for modules, 0 if built into the kernel" >>$CONF;
    echo "LOAD_USBCORE=${LOAD_USBCORE}" >>$CONF;
    echo "LOAD_USBINTERFACE=1" >>$CONF;
    echo "LOAD_NHDLC=1" >>$CONF;
    echo "# USB Interface - UHCI or OHCI" >>$CONF;
    USB=`echo $USB_TYPE | tr '[:upper:]' '[:lower:]'`;
    echo "DEFAULT_USBINTERFACE="${USB_INTERFACE}"" >>$CONF;
    echo "# Path to microcode (eg. mgmt.o or alcudsl.sys from the official Alcatel drivers)" >>$CONF;
    echo "MICROCODE="$MICROCODE"" >>$CONF;
    echo "# modem_run verbosity" >>$CONF;
    echo "VERBOSE=0" >>$CONF;
    echo "# Set this to 1 if you have configured the script" >>$CONF;
    echo "CONFIGURED=1" >>$CONF;
    for rc_dir in /etc/rc.d/init.d /etc/init.d;
    do
        [ -d "${rc_dir}" ] && break;
    done;
    cp ${INITSCRIPT} ${rc_dir}/speedtouch
}
--- End of Environment ---
Not ready to install the software at this time. - code 1
///////////////////////////////////////////////////////////////////

Czy ktoś moze mi powiedzieć skad sie to bierze i jak rozwiązać problem.
Robiłem też wg innych opisów ale bez skutecznie ...

dzięki z góry za pomoc !