Forum Debian Users Gang

BiExi · 2009-12-21 19:21:34

bazy

Kod:

radius=> SELECT username, attribute, op, value FROM radcheck;
 username |     attribute      | op |       value       
----------+--------------------+----+-------------------
 test     | Calling-Station-Id | == | 00:22:43:79:1A:72
 test     | Cleartext-Password | == | test
(2 rows)

radius=> SELECT username, attribute, op, value FROM radreply;
 username |     attribute     | op |    value     
----------+-------------------+----+--------------
 test     | Framed-IP-Address | =  | 192.168.1.10
 test     | Port-Limit        | := | 1
 test     | Auth-Type         | := | mschap
(3 rows)

radius=> SELECT UserName, GroupName FROM radusergroup;
 username | groupname 
----------+-----------
 test     | static
(1 row)

radius=> SELECT GroupName, Attribute, Value, op FROM radgroupcheck;
 groupname | attribute | value | op 
-----------+-----------+-------+----
(0 rows)

radius=> SELECT GroupName, Attribute, Value, Op FROM radgroupreply;
 groupname |     attribute      |        value        | op 
-----------+--------------------+---------------------+----
 static    | Service-Type       | Login-User          | :=
 static    | Framed-Compression | Van-Jacobsen-TCP-IP | ==
 static    | Framed-Protocol    | PPP                 | ==
 static    | Framed-MTU         | 1500                | ==
 static    | Service-Type       | Framed-User         | ==
(5 rows)

[b]/etc/raddb/radiusd.conf [/b]

Kod:

prefix = /usr
exec_prefix = ${prefix}
sysconfdir = /etc
localstatedir = /var
sbindir = ${exec_prefix}/sbin
logdir = ${localstatedir}/log/radius
raddbdir = ${sysconfdir}/raddb
radacctdir = ${logdir}/radacct
confdir = ${raddbdir}
run_dir = ${localstatedir}/run/radiusd
db_dir = $(raddbdir)
libdir = /usr/lib64
pidfile = ${run_dir}/radiusd.pid
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
listen {
    type = auth
    ipaddr = *
    port = 0
}
listen {
    ipaddr = *
    port = 0
    type = acct
}
hostname_lookups = no
allow_core_dumps = no
regular_expressions    = yes
extended_expressions    = yes
log {
    destination = files
    file = ${logdir}/radius.log
    syslog_facility = daemon
    stripped_names = no
    auth = no
    auth_badpass = no
    auth_goodpass = no
}
checkrad = ${sbindir}/checkrad
security {
    max_attributes = 200
    reject_delay = 1
    status_server = yes
}
proxy_requests  = yes
$INCLUDE proxy.conf
$INCLUDE clients.conf
snmp    = no
$INCLUDE snmp.conf
thread pool {
    start_servers = 5
    max_servers = 32
    min_spare_servers = 3
    max_spare_servers = 10
    max_requests_per_server = 0
}
modules {
    $INCLUDE ${confdir}/modules/
    $INCLUDE eap.conf
    $INCLUDE sql.conf
    $INCLUDE sql/postgresql/counter.conf
}
instantiate {
}
$INCLUDE policy.conf
$INCLUDE sites-enabled/

[b]/etc/raddb/modules/mschap[/b]

Kod:

mschap {
    use_mppe = yes
    require_encryption = yes
    require_strong = yes
    authtype = "MS-CHAPv2"
}

[b]/etc/raddb/sql.conf [/b]

Kod:

sql {
    database = "postgresql"
    driver = "rlm_sql_${database}"
    server = "localhost"
    login = "radius"
    password = "radius"
    radius_db = "radius"
    acct_table1 = "radacct"
    acct_table2 = "radacct"
    postauth_table = "radpostauth"
    authcheck_table = "radcheck"
    authreply_table = "radreply"
    groupcheck_table = "radgroupcheck"
    groupreply_table = "radgroupreply"
    usergroup_table = "radusergroup"
    deletestalesessions = yes
    sqltrace = no
    sqltracefile = ${logdir}/sqltrace.sql
    num_sql_socks = 5
    connect_failure_retry_delay = 60
    readclients = yes
    nas_table = "nas"
    $INCLUDE sql/${database}/dialup.conf
}

[b]/etc/raddb/sites-enabled/default [/b]

Kod:

authorize {
    preprocess
    mschap
    suffix
    unix
    sql
}
authenticate {
    Auth-Type MS-CHAP {
        mschap
    }
    unix
}
preacct {
    acct_unique
}
accounting {
    detail
    sql
}
session {
    radutmp
}
post-auth {
    sql
}
pre-proxy {
}
post-proxy {
}

[b]/etc/raddb/sql/postgresql/dialup.conf [/b]

Kod:

sql_user_name = "%{User-Name}"
nas_query = "SELECT id, nasname, shortname, type, secret FROM ${nas_table}"
authorize_check_query = "SELECT id, UserName, Attribute, Value, Op \
  FROM ${authcheck_table} \
  WHERE Username = '%{SQL-User-Name}' \
  ORDER BY id"
authorize_reply_query = "SELECT id, UserName, Attribute, Value, Op \
  FROM ${authreply_table} \
  WHERE Username = '%{SQL-User-Name}' \
  ORDER BY id"
authorize_group_check_query = "SELECT id, GroupName, Attribute, Value, op \
  FROM ${groupcheck_table} \
  WHERE GroupName = '%{Sql-Group}' \
  ORDER BY id"
authorize_group_reply_query = "SELECT id, GroupName, Attribute, Value, op \
  FROM ${groupreply_table} \
  WHERE GroupName = '%{Sql-Group}' \
  ORDER BY id"
accounting_onoff_query = "UPDATE ${acct_table1} \
  SET AcctStopTime = ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), \
  AcctSessionTime = (EXTRACT(EPOCH FROM ('%S'::timestamp with time zone - AcctStartTime::timestamp with time zone \
  - '%{%{Acct-Delay-Time}:-0}'::interval)))::BIGINT, \
  AcctTerminateCause = '%{Acct-Terminate-Cause}', \
  AcctStopDelay = 0 \
  WHERE AcctStopTime IS NULL \
  AND NASIPAddress= '%{NAS-IP-Address}' \
  AND AcctStartTime <= '%S'::timestamp"
accounting_update_query = "UPDATE ${acct_table1} \
  SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, \
  AcctSessionTime = '%{Acct-Session-Time}', \
  AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), \
  AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint) \
  WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' \
  AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
accounting_update_query_alt = "INSERT INTO ${acct_table1} \
  (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, \
  NASPortId, NASPortType, AcctStartTime, \
  AcctSessionTime, AcctAuthentic, AcctInputOctets, \
  AcctOutputOctets, CalledStationId, CallingStationId, \
  ServiceType, FramedProtocol, FramedIPAddress, XAscendSessionSvrKey) \
  VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', \
  '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{NAS-IP-Address}', \
  %{%{NAS-Port}:-NULL}::integer, '%{NAS-Port-Type}', \
  ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval - '%{%{Acct-Session-Time}:-0}'::interval), \
  '%{Acct-Session-Time}', '%{Acct-Authentic}', \
  (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), \
  (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), \
  '%{Called-Station-Id}', \
  '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', \
  NULLIF('%{Framed-IP-Address}', '')::inet, '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = "INSERT INTO ${acct_table1} \
  (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, \
   NASPortId, NASPortType, AcctStartTime, AcctAuthentic, \
  ConnectInfo_start, CalledStationId, CallingStationId, ServiceType, \
  FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) \
  VALUES('%{Acct-Session-Id}', \
  '%{Acct-Unique-Session-Id}', \
  '%{SQL-User-Name}', \
  NULLIF('%{Realm}', ''), \
  '%{NAS-IP-Address}', \
  %{%{NAS-Port}:-NULL}::integer, \
  '%{NAS-Port-Type}', \
  ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), \
  '%{Acct-Authentic}', \
  '%{Connect-Info}', \
  '%{Called-Station-Id}', \
  '%{Calling-Station-Id}', \
  '%{Service-Type}', \
  '%{Framed-Protocol}', \
  NULLIF('%{Framed-IP-Address}', '')::inet, \
  0, \
  '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt  = "UPDATE ${acct_table1} \
  SET AcctStartTime = ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), \
  AcctStartDelay = 0, \
  ConnectInfo_start = '%{Connect-Info}' \
  WHERE AcctSessionId = '%{Acct-Session-Id}' \
  AND UserName = '%{SQL-User-Name}' \
  AND NASIPAddress = '%{NAS-IP-Address}' \
  AND AcctStopTime IS NULL"
accounting_stop_query = "UPDATE ${acct_table2} \
  SET AcctStopTime = ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), \
  AcctSessionTime = CASE WHEN '%{Acct-Session-Time}' = '' THEN \
  (EXTRACT(EPOCH FROM ('%S'::TIMESTAMP WITH TIME ZONE - AcctStartTime::TIMESTAMP WITH TIME ZONE \
  - '%{%{Acct-Delay-Time}:-0}'::INTERVAL)))::BIGINT ELSE '%{Acct-Session-Time}' END, \
  AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), \
  AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), \
  AcctTerminateCause = '%{Acct-Terminate-Cause}', \
  AcctStopDelay = 0, \
  FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, \
  ConnectInfo_stop = '%{Connect-Info}' \
  WHERE AcctSessionId = '%{Acct-Session-Id}' \
  AND UserName = '%{SQL-User-Name}' \
  AND NASIPAddress = '%{NAS-IP-Address}' \
  AND AcctStopTime IS NULL"
accounting_stop_query_alt = "INSERT INTO ${acct_table2} \
  (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, \
  AcctSessionTime, AcctAuthentic, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, \
  CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStopDelay) \
  values('%{Acct-Session-Id}', \
  '%{Acct-Unique-Session-Id}', \
  '%{SQL-User-Name}', \
  NULLIF('%{Realm}', ''), \
  '%{NAS-IP-Address}', \
  %{%{NAS-Port}:-NULL}::integer, \
  '%{NAS-Port-Type}', \
  ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval - '%{%{Acct-Session-Time}:-0}'::interval), \
  ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), \
  NULLIF('%{Acct-Session-Time}', '')::bigint, '%{Acct-Authentic}', \
  '%{Connect-Info}', \
  (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), \
  (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), \
  '%{Called-Station-Id}', \
  '%{Calling-Station-Id}', \
  '%{Acct-Terminate-Cause}', \
  '%{Service-Type}', \
  '%{Framed-Protocol}', \
  NULLIF('%{Framed-IP-Address}', '')::inet, 0)"
group_membership_query = "SELECT GroupName FROM ${usergroup_table} WHERE UserName='%{SQL-User-Name}' ORDER BY priority"
postauth_query = "INSERT INTO ${postauth_table} (username, pass, reply, authdate) \
  VALUES ('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', NOW())"

[b]eap.conf[/b]

Kod:

    eap {
        default_eap_type = md5
        timer_expire     = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        md5 {
        }

        leap {
        }

        gtc {
            #challenge = "Password: "
            auth_type = PAP
        }

        tls {
            certdir = ${confdir}/certs
            cadir = ${confdir}/certs
            private_key_password = whatever
            private_key_file = ${certdir}/server.pem
            certificate_file = ${certdir}/server.pem
            CA_file = ${cadir}/ca.pem
            dh_file = ${certdir}/dh
            random_file = ${certdir}/random
            cipher_list = "DEFAULT"
            make_cert_command = "${certdir}/bootstrap"
        }

        ttls {
            default_eap_type = md5
            copy_request_to_tunnel = no
#            virtual_server = "inner-tunnel"
        }

        peap {
            default_eap_type = mschapv2
            copy_request_to_tunnel = no
            use_tunneled_reply = no
        #    proxy_tunneled_request_as_eap = yes
        }
        mschapv2 {
        }
    }

LOGI
Radius

Kod:

rad_recv: Access-Request packet from host 172.16.19.230 port 34276, id=21, length=178
    Service-Type = Framed-User
    Framed-Protocol = PPP
    NAS-Port = 25
    NAS-Port-Type = Ethernet
    User-Name = "test"
    Calling-Station-Id = "00:22:43:79:1A:72"
    Called-Station-Id = "mt"
    NAS-Port-Id = "wlan1"
    MS-CHAP-Challenge = 0x6a792711f59326e82335e680656d8b8c
    MS-CHAP2-Response = 0x0100fcf42c73e334d69a72367b6cc52b69d1000000000000000039678e0efb0441ac0d8852a66334edee25024bbf531f32a7
    NAS-Identifier = "MikroTik"
    NAS-IP-Address = 172.16.19.230
+- entering group authorize
++[preprocess] returns ok
  rlm_mschap: Found MS-CHAP attributes.  Setting 'Auth-Type  = mschap'
++[mschap] returns ok
    rlm_realm: No '@' in User-Name = "test", looking up realm NULL
    rlm_realm: No such realm "NULL"
++[suffix] returns noop
++[unix] returns notfound
    expand: %{User-Name} -> test
rlm_sql (sql): sql_set_user escaped user --> 'test'
rlm_sql (sql): Reserving sql socket id: 3
    expand: SELECT id, UserName, Attribute, Value, Op   FROM radcheck   WHERE Username = '%{SQL-User-Name}'   ORDER BY id -> SELECT id, UserName, Attribute, Value, Op   FROM radcheck   WHERE Username = 'test'   ORDER BY id
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 2 , fields = 5
    expand: SELECT GroupName FROM radusergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority -> SELECT GroupName FROM radusergroup WHERE UserName='test' ORDER BY priority
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 1 , fields = 1
    expand: SELECT id, GroupName, Attribute, Value, op   FROM radgroupcheck   WHERE GroupName = '%{Sql-Group}'   ORDER BY id -> SELECT id, GroupName, Attribute, Value, op   FROM radgroupcheck   WHERE GroupName = 'static'   ORDER BY id
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 0 , fields = 5
rlm_sql (sql): User found in group static
    expand: SELECT id, GroupName, Attribute, Value, op   FROM radgroupreply   WHERE GroupName = '%{Sql-Group}'   ORDER BY id -> SELECT id, GroupName, Attribute, Value, op   FROM radgroupreply   WHERE GroupName = 'static'   ORDER BY id
rlm_sql_postgresql: Status: PGRES_TUPLES_OK
rlm_sql_postgresql: query affected rows = 5 , fields = 5
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
  rad_check_password:  Found Auth-Type mschap
auth: type "MSCHAP"
+- entering group MS-CHAP
  rlm_mschap: No Cleartext-Password configured.  Cannot create LM-Password.
  rlm_mschap: No Cleartext-Password configured.  Cannot create NT-Password.
  rlm_mschap: Told to do MS-CHAPv2 for test with NT-Password
  rlm_mschap: FAILED: No NT/LM-Password.  Cannot perform authentication.
  rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
auth: Failed to validate the user.
Sending Access-Reject of id 21 to 172.16.19.230 port 34276
    Service-Type := Login-User
    Framed-Compression == Van-Jacobson-TCP-IP
    Framed-Protocol == PPP
    Framed-MTU == 1500
    Service-Type == Framed-User
    MS-CHAP-Error = "\001E=691 R=1"
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 21 with timestamp +38
Ready to process requests.

MT

Kod:

06:04:13 pppoe,info PPPoE connection established from 00:22:43:79:1A:72 
06:04:13 pppoe,ppp,info <pppoe-0>: waiting for call... 
06:04:13 radius,debug new request 1b:1e code=Access-Request service=ppp called-id=mt 
06:04:13 radius,debug sending 1b:1e to 217.96.37.4:1812 
06:04:13 radius,debug,packet sending Access-Request with id 21 to 217.96.37.4:1812 
06:04:13 radius,debug,packet     Signature = 0x74793838aa1ce306825623385525ecf2 
06:04:13 radius,debug,packet     Service-Type = 2 
06:04:13 radius,debug,packet     Framed-Protocol = 1 
06:04:13 radius,debug,packet     NAS-Port = 25 
06:04:13 radius,debug,packet     NAS-Port-Type = 15 
06:04:13 radius,debug,packet     User-Name = "test" 
06:04:13 radius,debug,packet     Calling-Station-Id = "00:22:43:79:1A:72" 
06:04:13 radius,debug,packet     Called-Station-Id = "mt" 
06:04:13 radius,debug,packet     NAS-Port-Id = "wlan1" 
06:04:13 radius,debug,packet     MS-CHAP-Challenge = 0x6a792711f59326e82335e680656d8b8c 
06:04:13 radius,debug,packet     MS-CHAP2-Response = 0x0100fcf42c73e334d69a72367b6cc52b 
06:04:13 radius,debug,packet       69d1000000000000000039678e0efb04 
06:04:13 radius,debug,packet       41ac0d8852a66334edee25024bbf531f 
06:04:13 radius,debug,packet       32a7 
06:04:13 radius,debug,packet     NAS-Identifier = "MikroTik" 
06:04:13 radius,debug,packet     NAS-IP-Address = 172.16.19.230 
06:04:13 radius,debug,packet received Access-Reject with id 21 from 217.96.37.4:1812 
06:04:13 radius,debug,packet     Signature = 0x640f055e1b2c927eec5e02a207520bc5 
06:04:13 radius,debug,packet     Service-Type = 1 
06:04:13 radius,debug,packet     Framed-Compression = 1 
06:04:13 radius,debug,packet     Framed-Protocol = 1 
06:04:13 radius,debug,packet     Framed-MTU = 1500 
06:04:13 radius,debug,packet     Service-Type = 2 
06:04:13 radius,debug,packet     MS-CHAP-Error = 0x01453d36393120523d31 
06:04:13 radius,debug received reply for 1b:1e 
06:04:13 pppoe,ppp,info <pppoe-0>: terminating... - user test authentication failed 
06:04:13 pppoe,ppp,info <pppoe-0>: disconnected

Windows zglasza blad nr 691

Dest · 2009-12-22 18:55:17

Cześć! Wiem jaki FreeRADIUS może być miły gdy chce się go uruchomić. Mogę się mylić, ale za to coś podpowiem. Zatem zdecyduj się na konkretną formę uwierzytelniania - masz md5, skonfigurowane mschapv2 i inne. Wywalić, znaczy się zakomentować to co niepotrzebne i używać tego co się chce. Druga sprawa to proxy - serwer pracuje jako główny serwer czy jako proxy? Teraz wg czego się uwierzytelniasz - sql, unix itd. Po co tyle dodatkowych nie potrzebnych pierdołków? Odpowiedzi tylko Ty znasz, co jest potrzebne a co nie. Spokojnie rozpracujesz go później czy prędzej.

BiExi · 2009-12-22 20:36:57

jak wlaczyc wylaczyc md5?

Dest · 2009-12-22 21:51:30

W MT? Nie wiem, widze tylko, że chodzi o RADIUSa, Widze konfigurację jego, więc opierać się będe tylko na FreeRADIUS.
Podpowiedź do tego: w pliku eap.conf masz default_eap_type = md5. Tak więc zanim zacznie się wszystko konfigurować należy dokładnie przemyśleć co chce się zrobić, jakimi metodami, jacy użytkownicy (systemy, używany suplikant). Materiałów o FreeRADIUS jest wiele, większość z tego to tylko przykłady konfiguracji, lecz na podstawie tych szczątkowych informacji można złożyć rozwiązanie, które będzie pasować akurat nam.

zlyZwierz · 2009-12-23 13:11:03

Przecież to działa od strzała - na domyślnej konfiguracji.

BiExi · 2009-12-24 21:19:45

I właśnie chyba jeszcze raz od podstaw skonfiguruje tego freeradius'a

rpc · 2009-12-29 23:49:13

Nie znam MT ale jeśli mowa o freeradius2 to
do windows najlepiej oprzeć się nie na MD5 a na MSCHAPV2. Windows lubi EAP-TLS, EAP-PEAP-mchapv2. Resztę ja bym wyłączył i tyle. Jako domyślne default_eap_type = peap.
Zamiast Cleartext-Password ja bym użył np.
DEFAULT User-Password := "haslo_do_logowania"

BiExi · 2009-12-30 10:17:21

Problem rozwiazalam wczeniej juz wiec 2 sprawy trzeba bylo zmienic
Cleartext-Password :=
oraz w konfiguracji MT dodac pule adresowa do koncentratora i tyle :]

co do User-Password to stosuje sie w radiusie1 a w 2 uzywa sie Cleartext-Password

bolos_11 · 2010-01-09 21:26:19

[quote=zlyZwierz]Przecież to działa od strzała - na domyślnej konfiguracji.[/quote]
pytanie tylko pod ktora dystrybujcja LINUXa ?

BiExi · 2010-01-09 22:21:03

bolos_11 dziala na defaulcie obojetnie gdzie (nim troszeczke trza poustawiac ale niewiele)

bolos_11 · 2010-01-16 22:33:12

[quote=BiExi]bolos_11 dziala na defaulcie obojetnie gdzie (nim troszeczke trza poustawiac ale niewiele)[/quote]
TYLE to wiem, jak sie w plikach TXT wsio poustawia TO jest OK ... gorzej jak w SQL sa dane ... sypie bledami ... i skonczyly mi sie pomysly co dalej

Ostatnio edytowany przez bolos_11 (2010-01-16 22:33:49)

domel90 · 2011-11-16 09:22:36

Podłączę się trochę do tematu oraz go odświeżę.

Skonfigurowałem freeradiusa na dystrybucji Centos oraz switch any wymagał uwierzytelniania 802.1x.

Klienta mam na WinXP.

Jeśli na kliencie wybiorę MD5_Challenge - to klient uwierzytelnia się poprawnie i wszystko działa.

Niestety nie mogę poradzić sobie z MSCHAPv2 <-- chciałbym aby klienci uwierzytelniani się właśnie tą metodą (za pomocą hasła). Nie wiem gdzie mam błąd.

Jeśli Ktoś z Was może podesłać mi jakiegoś dokładnego manuala, albo spakowaną przykładową działającą konfigurację całego Freeradiusa będę wdzięczny.

Mój mail to domin90@wp.pl

Z góry wielkie dzięki

Time (s)	Query
0.00012	SET CHARSET latin2
0.00007	SET NAMES latin2
0.00171	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.147.66.149' WHERE u.id=1
0.00147	UPDATE punbb_online SET logged=1716114706 WHERE ident='3.147.66.149'
0.00037	SELECT * FROM punbb_online WHERE logged<1716114406
0.00110	SELECT topic_id FROM punbb_posts WHERE id=185883
0.00233	SELECT id FROM punbb_posts WHERE topic_id=15779 ORDER BY posted
0.00118	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=15779 AND t.moved_to IS NULL
0.00008	SELECT search_for, replace_with FROM punbb_censoring
0.00228	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=15779 ORDER BY p.id LIMIT 0,25
0.00113	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=15779
Total query time: 0.01184 s

Forum Debian Users Gang

Ogłoszenie

#1 2009-12-21 19:21:34

BiExi - matka przelozona

MT Freeradius problemów ciąg dalszy

Kod:

Kod:

Kod:

Kod:

Kod:

Kod:

Kod:

Kod:

Kod:

#2 2009-12-22 18:55:17

Dest - Nowy użytkownik

Re: MT Freeradius problemów ciąg dalszy

#3 2009-12-22 20:36:57

BiExi - matka przelozona

Re: MT Freeradius problemów ciąg dalszy

#4 2009-12-22 21:51:30

Dest - Nowy użytkownik

Re: MT Freeradius problemów ciąg dalszy

#5 2009-12-23 13:11:03

zlyZwierz - Moderator

Re: MT Freeradius problemów ciąg dalszy

#6 2009-12-24 21:19:45

BiExi - matka przelozona

Re: MT Freeradius problemów ciąg dalszy

#7 2009-12-29 23:49:13

rpc - Użytkownik

Re: MT Freeradius problemów ciąg dalszy

#8 2009-12-30 10:17:21

BiExi - matka przelozona

Re: MT Freeradius problemów ciąg dalszy

#9 2010-01-09 21:26:19

bolos_11 - Użytkownik

Re: MT Freeradius problemów ciąg dalszy

#10 2010-01-09 22:21:03

BiExi - matka przelozona

Re: MT Freeradius problemów ciąg dalszy

#11 2010-01-16 22:33:12

bolos_11 - Użytkownik

Re: MT Freeradius problemów ciąg dalszy

#12 2011-11-16 09:22:36

domel90 - Nowy użytkownik

Re: MT Freeradius problemów ciąg dalszy

Stopka forum

Informacje debugowania