Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#26 2012-02-01 15:50:28
rychu - 
elektryk dyżurny
- rychu
- elektryk dyżurny
- Skąd: gdańsk
- Zarejestrowany: 2004-12-28
Re: Kompilacja karty graficznej na sztywno
dawaj dalej co jest w devices/
linux regd. user #248790
Offline
#27 2012-02-01 16:14:46
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
Kod:
[*] Networking support --->
<*> Bluetooth subsystem support --->
│ │ --- Bluetooth subsystem support │ │
│ │ [*] L2CAP protocol support │ │
│ │ [*] SCO links support │ │
│ │ <M> RFCOMM protocol support │ │
│ │ [*] RFCOMM TTY support │ │
│ │ <M> BNEP protocol support │ │
│ │ [*] Multicast filter support │ │
│ │ [*] Protocol filter support │ │
│ │ <M> HIDP protocol support │ │
│ │ Bluetooth device drivers ---> │ │
Bluetooth device drivers
│ │ <M> HCI USB driver │ │
│ │ <M> HCI SDIO driver │ │
│ │ <M> HCI UART driver │ │
│ │ [*] UART (H4) protocol support │ │
│ │ [*] BCSP protocol support │ │
│ │ [*] Atheros AR300x serial support │ │
│ │ [*] HCILL protocol support │ │
│ │ <M> HCI BCM203x USB driver │ │
│ │ <M> HCI BPA10x USB driver │ │
│ │ <M> HCI BlueFRITZ! USB driver │ │
│ │ <M> HCI DTL1 (PC Card) driver │ │
│ │ <M> HCI BT3C (PC Card) driver │ │
│ │ <M> HCI BlueCard (PC Card) driver │ │
│ │ <M> HCI UART (PC Card) device driver │ │
│ │ <M> HCI VHCI (Virtual HCI device) driver │ │
│ │ <M> Marvell Bluetooth driver support │ │
│ │ <M> Marvell BT-over-SDIO driver │ │
│ │ <M> Atheros firmware download driver │ │tak samo zrobiłem w USB support , dodałem wszystko co było możliwe oprócz :
USB Serial Converter support --->
USB Gadget Support --->
___
[quote=rychu]dawaj dalej co jest w devices/[/quote]
Kod:
cd /sys/class/usb_device/usbdev usbdev1.1/ usbdev1.2/ usbdev2.1/ usbdev3.1/ usbdev4.1/ usbdev5.1/
w /sys/class/usb_device/ jest tylko katalog usbdev
___
w lspci -k 3 urządzenia nie mają "Kernel driver in use" to znaczy ze niektóre nie potrzebują czy nie są zainstalowane poprostu ??
Kod:
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
Subsystem: Acer Incorporated [ALI] Device 0349
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0349Offline
#28 2012-02-01 17:16:51
NIC - Członek DUG
Re: Kompilacja karty graficznej na sztywno
Nie, nie. Ten RFKILL to w jądrze siedzi, a pewnie doinstalowałeś tylko taką aplikację przestrzeni użytkownika.
Jeśli masz ten moduł w jądrze to winneś mieć to:
Kod:
ls /sys/module/rfkill/
Nic tam ciekawego nie ma (parameters uevent), ale wskaże czy ten moduł masz załadowany (modprobe rfkill?)
W /sys/class też powinna się pojawić stosowna klasa, ale to jak ten moduł jest i jest coś co go używa (Bluetooth/WiFi)
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#29 2012-02-01 17:25:23
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
ok jest :
cat /sys/class/rfkill/rfkill*/name
Kod:
acer-wireless phy0
i co dalej ?? ktoś ma jakiś pomysł ??
Ostatnio edytowany przez Pablik (2012-02-01 18:11:17)
Offline
#30 2012-02-01 18:38:17
NIC - Członek DUG
Re: Kompilacja karty graficznej na sztywno
Sprawdziłem w kodzie i "acer-wireless" jest włącznikiem/wyłącznikiem tylko dla WiFi. Dla Bluetootha pojawi się "acer-bluetooth", skoro go nie masz to czegoś brakuje.
Weź zamieść swój "dmesg" i "lsusb -v". Będzie jasna sytuacja.
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#31 2012-02-01 18:42:46
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
dmesg
Kod:
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.18 (root@Notebook) (gcc version 4.4.5 (Debian 4.4.5-8) ) #24 SMP PREEMPT Wed Feb 1 17:37:14 CET 2012 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f494000 (usable) [ 0.000000] BIOS-e820: 000000003f494000 - 000000003f4bf000 (reserved) [ 0.000000] BIOS-e820: 000000003f4bf000 - 000000003f578000 (usable) [ 0.000000] BIOS-e820: 000000003f578000 - 000000003f5bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f5bf000 - 000000003f5ed000 (usable) [ 0.000000] BIOS-e820: 000000003f5ed000 - 000000003f5ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f5ff000 - 000000003f600000 (usable) [ 0.000000] BIOS-e820: 000000003f600000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Acer AO532h /AO532h , BIOS V1.26 04/28/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3f600 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-through [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF00000 mask 0FFF00000 write-protect [ 0.000000] 1 base 000000000 mask 0E0000000 write-back [ 0.000000] 2 base 020000000 mask 0E0000000 write-back [ 0.000000] 3 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009e000] 9e000 size 4096 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 3f5fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 3f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: DSDT 3f5f2000 07B21 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: FACS 3f586000 00040 [ 0.000000] ACPI: HPET 3f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 3f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 3f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SLIC 3f5f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 3f5f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT 3f5ee000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: WDAT 3f5ed000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f494 [ 0.000000] 0: 0x0003f4bf -> 0x0003f578 [ 0.000000] 0: 0x0003f5bf -> 0x0003f5ed [ 0.000000] 0: 0x0003f5ff -> 0x0003f600 [ 0.000000] On node 0 totalpages: 259339 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 31873 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @f6800000 s23872 r0 d21184 u2097152 [ 0.000000] pcpu-alloc: s23872 r0 d21184 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257310 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.18 root=/dev/sda1 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f600) [ 0.000000] Memory: 1020116k/1038336k available (4916k kernel code, 17240k reserved, 2284k data, 448k init, 128504k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff67000 - 0xfffff000 ( 608 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1709000 - 0xc1779000 ( 448 kB) [ 0.000000] .data : 0xc14cd228 - 0xc17083c0 (2284 kB) [ 0.000000] .text : 0xc1000000 - 0xc14cd228 (4916 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:384 [ 0.000000] CPU 0 irqstacks, hard=f640c000 soft=f640e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.658 MHz processor. [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.31 BogoMIPS (lpj=1662658) [ 0.001014] pid_max: default: 32768 minimum: 301 [ 0.001127] Mount-cache hash table entries: 512 [ 0.001463] Disabled fast string operations [ 0.001472] CPU: Physical Processor ID: 0 [ 0.001476] CPU: Processor Core ID: 0 [ 0.001481] mce: CPU supports 5 MCE banks [ 0.001495] using mwait in idle threads. [ 0.001592] Freeing SMP alternatives: 20k freed [ 0.001611] ACPI: Core revision 20110413 [ 0.011090] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012185] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.022198] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a [ 0.022998] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.022998] ... version: 3 [ 0.022998] ... bit width: 40 [ 0.022998] ... generic registers: 2 [ 0.022998] ... value mask: 000000ffffffffff [ 0.022998] ... max period: 000000007fffffff [ 0.022998] ... fixed-purpose events: 3 [ 0.022998] ... event mask: 0000000700000003 [ 0.036038] CPU 1 irqstacks, hard=f64d4000 soft=f64d6000 [ 0.036044] Booting Node 0, Processors #1 Ok. [ 0.036051] smpboot cpu 1: start_ip = 9e000 [ 0.001999] Initializing CPU#1 [ 0.001999] Disabled fast string operations [ 0.108017] Brought up 2 CPUs [ 0.108025] Total of 2 processors activated (6650.47 BogoMIPS). [ 0.108485] devtmpfs: initialized [ 0.108783] kworker/u:0 used greatest stack depth: 7504 bytes left [ 0.109284] NET: Registered protocol family 16 [ 0.110343] EISA bus registered [ 0.110343] ACPI: bus type pci registered [ 0.110551] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.110551] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.110551] PCI: Using MMCONFIG for extended config space [ 0.110551] PCI: Using configuration type 1 for base access [ 0.111456] kworker/u:0 used greatest stack depth: 7144 bytes left [ 0.126969] bio: create slab <bio-0> at 0 [ 0.130420] ACPI: EC: Look up EC in DSDT [ 0.133437] ACPI: Executed 1 blocks of module-level executable AML code [ 0.137043] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.137800] ACPI: SSDT 3f4b7c90 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.138532] ACPI: Dynamic OEM Table Load: [ 0.138540] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.138795] ACPI: SSDT 3f4b6e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.139486] ACPI: Dynamic OEM Table Load: [ 0.139493] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.144635] ACPI: SSDT 3f4b7f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.145345] ACPI: Dynamic OEM Table Load: [ 0.145352] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.145576] ACPI: SSDT 3f4b5f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.146269] ACPI: Dynamic OEM Table Load: [ 0.146277] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.152039] ACPI: Interpreter enabled [ 0.152044] ACPI: (supports S0 S5) [ 0.152070] ACPI: Using IOAPIC for interrupt routing [ 0.286043] ACPI: Power Resource [FN00] (on) [ 0.286911] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.287089] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.287952] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353) [ 0.287984] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.287988] _OSC request data:1 8 1f [ 0.287999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.289519] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.289527] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.289534] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.289542] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] [ 0.289567] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600 [ 0.289627] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300 [ 0.289643] pci 0000:00:02.0: reg 10: [mem 0x58180000-0x581fffff] [ 0.289653] pci 0000:00:02.0: reg 14: [io 0x60c0-0x60c7] [ 0.289663] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref] [ 0.289673] pci 0000:00:02.0: reg 1c: [mem 0x58000000-0x580fffff] [ 0.289720] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380 [ 0.289734] pci 0000:00:02.1: reg 10: [mem 0x58100000-0x5817ffff] [ 0.289850] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.289880] pci 0000:00:1b.0: reg 10: [mem 0x58200000-0x58203fff 64bit] [ 0.290012] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.290021] pci 0000:00:1b.0: PME# disabled [ 0.290057] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.290190] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.290199] pci 0000:00:1c.0: PME# disabled [ 0.290238] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.290367] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.290375] pci 0000:00:1c.1: PME# disabled [ 0.290419] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.290487] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f] [ 0.290542] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.290610] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f] [ 0.290665] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.290732] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f] [ 0.290787] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.290854] pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f] [ 0.290923] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.290955] pci 0000:00:1d.7: reg 10: [mem 0x58204400-0x582047ff] [ 0.291106] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.291117] pci 0000:00:1d.7: PME# disabled [ 0.291151] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.291268] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 [ 0.291431] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 [ 0.291462] pci 0000:00:1f.2: reg 10: [io 0x60b8-0x60bf] [ 0.291478] pci 0000:00:1f.2: reg 14: [io 0x60cc-0x60cf] [ 0.291495] pci 0000:00:1f.2: reg 18: [io 0x60b0-0x60b7] [ 0.291511] pci 0000:00:1f.2: reg 1c: [io 0x60c8-0x60cb] [ 0.291528] pci 0000:00:1f.2: reg 20: [io 0x60a0-0x60af] [ 0.291545] pci 0000:00:1f.2: reg 24: [mem 0x58204000-0x582043ff] [ 0.291613] pci 0000:00:1f.2: PME# supported from D3hot [ 0.291621] pci 0000:00:1f.2: PME# disabled [ 0.291648] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.291716] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f] [ 0.291861] pci 0000:01:00.0: [1969:1062] type 0 class 0x000200 [ 0.291898] pci 0000:01:00.0: reg 10: [mem 0x57000000-0x5703ffff 64bit] [ 0.291919] pci 0000:01:00.0: reg 18: [io 0x5000-0x507f] [ 0.292084] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.292095] pci 0000:01:00.0: PME# disabled [ 0.293993] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.294003] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.294012] pci 0000:00:1c.0: bridge window [mem 0x57000000-0x57ffffff] [ 0.294025] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref] [ 0.294131] pci 0000:02:00.0: [168c:002a] type 0 class 0x000280 [ 0.294169] pci 0000:02:00.0: reg 10: [mem 0x56000000-0x5600ffff 64bit] [ 0.294339] pci 0000:02:00.0: supports D1 [ 0.294344] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.294353] pci 0000:02:00.0: PME# disabled [ 0.294388] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.294407] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.294416] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.294425] pci 0000:00:1c.1: bridge window [mem 0x56000000-0x56ffffff] [ 0.294438] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref] [ 0.294534] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.294544] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.294554] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.294566] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.294573] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.294587] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.294594] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.294600] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode) [ 0.294628] pci_bus 0000:00: on NUMA node 0 [ 0.294636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.294948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.295082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.295357] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353) [ 0.295373] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.295378] _OSC request data:1 1f 1f [ 0.295387] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.295508] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353) [ 0.295524] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.295528] _OSC request data:1 0 1d [ 0.295537] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d [ 0.295542] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.302434] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.302567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.302695] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.302822] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.302951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.303111] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.303242] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.303371] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.303805] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.303824] vgaarb: loaded [ 0.303827] vgaarb: bridge control possible 0000:00:02.0 [ 0.304297] SCSI subsystem initialized [ 0.304548] libata version 3.00 loaded. [ 0.306818] wmi: Mapper loaded [ 0.306898] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.306898] PCI: Using ACPI for IRQ routing [ 0.317005] PCI: pci_cache_line_size set to 64 bytes [ 0.317108] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.317114] reserve RAM buffer: 000000003f494000 - 000000003fffffff [ 0.317121] reserve RAM buffer: 000000003f578000 - 000000003fffffff [ 0.317127] reserve RAM buffer: 000000003f5ed000 - 000000003fffffff [ 0.317133] reserve RAM buffer: 000000003f600000 - 000000003fffffff [ 0.317672] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.317672] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.317672] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.322138] Switching to clocksource hpet [ 0.322321] pnp: PnP ACPI init [ 0.322338] ACPI: bus type pnp registered [ 0.322919] pnp 00:00: [bus 00-ff] [ 0.322926] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.322932] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.322937] pnp 00:00: [io 0x0d00-0xffff window] [ 0.322943] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.322949] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.322955] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.322961] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.322966] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.322972] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.322977] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.322983] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.322989] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.322994] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.323000] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.323019] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.323025] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.323031] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.323037] pnp 00:00: [mem 0x40000000-0xfebfffff window] [ 0.323220] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.383298] pnp 00:01: [io 0x0068] [ 0.383304] pnp 00:01: [io 0x006c] [ 0.383310] pnp 00:01: [io 0x164e-0x164f] [ 0.383314] pnp 00:01: [io 0x0061] [ 0.383319] pnp 00:01: [io 0x0070] [ 0.383323] pnp 00:01: [io 0x0080] [ 0.383328] pnp 00:01: [io 0x0092] [ 0.383333] pnp 00:01: [io 0x00b2-0x00b3] [ 0.383338] pnp 00:01: [io 0x0063] [ 0.383342] pnp 00:01: [io 0x0065] [ 0.383347] pnp 00:01: [io 0x0067] [ 0.383352] pnp 00:01: [io 0x0600-0x060f] [ 0.383356] pnp 00:01: [io 0x0610] [ 0.383361] pnp 00:01: [io 0x0800-0x080f] [ 0.383366] pnp 00:01: [io 0x0810-0x0817] [ 0.383371] pnp 00:01: [io 0x0400-0x047f] [ 0.383376] pnp 00:01: [io 0x0500-0x053f] [ 0.383381] pnp 00:01: [io 0xff2c-0xff2f] [ 0.383386] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.383392] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.383397] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.383402] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.383408] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.383413] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.383418] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.383614] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.383623] system 00:01: [io 0x0600-0x060f] has been reserved [ 0.383630] system 00:01: [io 0x0610] has been reserved [ 0.383636] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.383642] system 00:01: [io 0x0810-0x0817] has been reserved [ 0.383649] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.383655] system 00:01: [io 0x0500-0x053f] has been reserved [ 0.383662] system 00:01: [io 0xff2c-0xff2f] has been reserved [ 0.383670] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.383677] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.383684] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.383691] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.383698] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.383705] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.383712] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.383720] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.383747] pnp 00:02: [io 0x0000-0x001f] [ 0.383752] pnp 00:02: [io 0x0081-0x0091] [ 0.383757] pnp 00:02: [io 0x0093-0x009f] [ 0.383762] pnp 00:02: [io 0x00c0-0x00df] [ 0.383768] pnp 00:02: [dma 4] [ 0.383882] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.383950] pnp 00:03: [io 0x0070-0x0077] [ 0.384085] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.384231] pnp 00:04: [irq 0 disabled] [ 0.384249] pnp 00:04: [irq 8] [ 0.384255] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.384371] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.384402] pnp 00:05: [io 0x00f0] [ 0.384413] pnp 00:05: [irq 13] [ 0.384530] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.384567] pnp 00:06: [mem 0xff800000-0xffffffff] [ 0.384681] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 0.384763] pnp 00:07: [io 0x0060] [ 0.384769] pnp 00:07: [io 0x0064] [ 0.384781] pnp 00:07: [irq 1] [ 0.384900] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.385028] pnp 00:08: [irq 12] [ 0.385159] pnp 00:08: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active) [ 0.385458] pnp: PnP ACPI: found 9 devices [ 0.385464] ACPI: ACPI bus type pnp unregistered [ 0.428542] PCI: max bus depth: 1 pci_try_num: 2 [ 0.428592] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.428601] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.428612] pci 0000:00:1c.0: bridge window [mem 0x57000000-0x57ffffff] [ 0.428622] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref] [ 0.428634] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.428642] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.428652] pci 0000:00:1c.1: bridge window [mem 0x56000000-0x56ffffff] [ 0.428661] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref] [ 0.428674] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.428679] pci 0000:00:1e.0: bridge window [io disabled] [ 0.428688] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.428696] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.428732] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.428743] pci 0000:00:1c.0: setting latency timer to 64 [ 0.428760] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.428770] pci 0000:00:1c.1: setting latency timer to 64 [ 0.428783] pci 0000:00:1e.0: setting latency timer to 64 [ 0.428792] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.428798] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.428804] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.428810] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff] [ 0.428816] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.428822] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff] [ 0.428828] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref] [ 0.428834] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.428840] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff] [ 0.428847] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref] [ 0.428853] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.428859] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.428865] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.428871] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff] [ 0.428954] NET: Registered protocol family 2 [ 0.429093] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.429563] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430534] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.430968] TCP: Hash tables configured (established 131072 bind 65536) [ 0.430974] TCP reno registered [ 0.430982] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.431040] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.431275] NET: Registered protocol family 1 [ 0.431461] RPC: Registered named UNIX socket transport module. [ 0.431468] RPC: Registered udp transport module. [ 0.431472] RPC: Registered tcp transport module. [ 0.431476] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.431500] pci 0000:00:02.0: Boot video device [ 0.431527] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 0.431532] pci 0000:00:1d.0: Performing full reset [ 0.431557] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.431562] pci 0000:00:1d.1: Performing full reset [ 0.431586] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.431591] pci 0000:00:1d.2: Performing full reset [ 0.431614] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.431619] pci 0000:00:1d.3: Performing full reset [ 0.431801] PCI: CLS 64 bytes, default 64 [ 0.431838] Simple Boot Flag at 0x44 set to 0x1 [ 0.433706] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107 [ 0.433720] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107 [ 0.433827] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.433971] Intel AES-NI instructions are not detected. [ 0.438260] highmem bounce pool size: 64 pages [ 0.438272] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.456315] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.457184] msgmni has been set to 1741 [ 0.459307] NET: Registered protocol family 38 [ 0.459638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.459646] io scheduler noop registered [ 0.459687] io scheduler cfq registered (default) [ 0.459801] xz_dec_test: module loaded [ 0.459805] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 0.460036] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.460123] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.460302] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.460368] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.521048] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.581143] ACPI: AC Adapter [AC] (off-line) [ 0.581428] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.581439] ACPI: Power Button [PWRB] [ 0.581584] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.581594] ACPI: Sleep Button [SLPB] [ 0.581749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.581796] ACPI: Lid Switch [LID0] [ 0.581973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.581982] ACPI: Power Button [PWRF] [ 0.582255] ACPI: Fan [FAN] (on) [ 0.582345] ACPI: acpi_idle registered with cpuidle [ 0.582750] Marking TSC unstable due to TSC halts in idle [ 0.585181] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.585188] ACPI: Thermal Zone [THRM] (47 C) [ 1.211234] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.211251] ACPI: Battery Slot [BAT0] (battery present) [ 1.211682] Linux agpgart interface v0.103 [ 1.211761] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 1.212067] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.212403] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.212704] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 1.212817] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.212824] Hangcheck: Using getrawmonotonic(). [ 1.212932] [drm] Initialized drm 1.1.0 20060810 [ 1.212973] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.212982] i915 0000:00:02.0: setting latency timer to 64 [ 1.279871] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 1.279881] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.279886] [drm] Driver supports precise vblank timestamp query. [ 1.279968] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.605304] [drm] initialized overlay support [ 1.624672] fbcon: inteldrmfb (fb0) is primary device [ 1.662557] fixme: max PWM is zero. [ 1.676226] Console: switching to colour frame buffer device 128x37 [ 1.682500] fb0: inteldrmfb frame buffer device [ 1.682504] drm: registered panic notifier [ 1.986145] acpi device:28: registered as cooling_device3 [ 1.986512] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.986525] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 1.986626] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.988964] loop: module loaded [ 1.989671] ahci 0000:00:1f.2: version 3.0 [ 1.989697] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.989777] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 1.989838] ahci: SSS flag set, parallel bus scan disabled [ 1.989887] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.989895] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.989905] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.991606] scsi0 : ahci [ 1.991931] scsi1 : ahci [ 1.992192] scsi2 : ahci [ 1.992431] scsi3 : ahci [ 1.992904] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 43 [ 1.992913] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 43 [ 1.992919] ata3: DUMMY [ 1.992922] ata4: DUMMY [ 1.993240] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.993259] atl1c 0000:01:00.0: setting latency timer to 64 [ 2.064785] atl1c 0000:01:00.0: version 1.0.1.0-NAPI [ 2.065821] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 2.079174] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.079236] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.079735] mousedev: PS/2 mouse device common for all mice [ 2.080478] rtc_cmos 00:03: RTC can wake from S4 [ 2.080697] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.080741] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.080819] i2c /dev entries driver [ 2.082654] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.082983] Linux video capture interface: v2.00 [ 2.083681] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 2.083864] EISA: Probing bus 0 at eisa.0 [ 2.083870] EISA: Cannot allocate resource for mainboard [ 2.083875] Cannot allocate resource for EISA slot 1 [ 2.083881] Cannot allocate resource for EISA slot 2 [ 2.083890] Cannot allocate resource for EISA slot 3 [ 2.083894] Cannot allocate resource for EISA slot 4 [ 2.083899] Cannot allocate resource for EISA slot 5 [ 2.083904] Cannot allocate resource for EISA slot 6 [ 2.083908] Cannot allocate resource for EISA slot 7 [ 2.083913] Cannot allocate resource for EISA slot 8 [ 2.083917] EISA: Detected 0 cards. [ 2.084566] cpuidle: using governor ladder [ 2.084766] acerhdf: Acer Aspire One Fan driver, v.0.5.24 [ 2.084793] acerhdf: unknown (unsupported) BIOS version Acer /AO532h /V1.26, please report, aborting! [ 2.085452] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.085546] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 2.085591] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2.092236] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.100664] hda_codec: ALC272X: BIOS auto-probing. [ 2.104275] ALSA device list: [ 2.104282] #0: HDA Intel at 0x58200000 irq 44 [ 2.104287] Netfilter messages via NETLINK v0.30. [ 2.104318] nf_conntrack version 0.5.0 (15939 buckets, 63756 max) [ 2.104750] ctnetlink v0.93: registering with nfnetlink. [ 2.105702] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.105786] TCP cubic registered [ 2.105792] NET: Registered protocol family 17 [ 2.105819] Using IPI Shortcut mode [ 2.300133] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.301030] ata1.00: unexpected _GTF length (4) [ 2.347554] ata1.00: ATA-8: ST9160314AS, 0001SDM1, max UDMA/133 [ 2.347568] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.349265] ata1.00: unexpected _GTF length (4) [ 2.349619] ata1.00: configured for UDMA/133 [ 2.349845] scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0001 PQ: 0 ANSI: 5 [ 2.350403] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.350579] sd 0:0:0:0: [sda] Write Protect is off [ 2.350590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.350668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.350720] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.351046] kworker/u:5 used greatest stack depth: 7132 bytes left [ 2.372220] sda: sda1 sda2 sda3 < sda5 > [ 2.373396] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.656129] ata2: SATA link down (SStatus 0 SControl 300) [ 2.818637] EXT3-fs: barriers not enabled [ 2.829608] kjournald starting. Commit interval 5 seconds [ 2.829695] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 2.829718] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.829775] Freeing unused kernel memory: 448k freed [ 3.397121] modprobe used greatest stack depth: 6364 bytes left [ 3.623246] stty used greatest stack depth: 5924 bytes left [ 5.694797] acer_wmi: Acer Laptop ACPI-WMI Extras [ 5.701551] usbcore: registered new interface driver usbfs [ 5.702773] usbcore: registered new interface driver hub [ 5.702909] usbcore: registered new device driver usb [ 5.794049] cfg80211: Calling CRDA to update world regulatory domain [ 5.814685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.814696] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 5.814771] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.814812] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.814822] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.814881] drivers/usb/core/inode.c: creating file 'devices' [ 5.814893] drivers/usb/core/inode.c: creating file '001' [ 5.814904] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.814925] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 5.814936] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 5.814981] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 5.815037] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.815051] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 5.818965] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 5.818974] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 5.819036] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58204400 [ 5.819051] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 5.822963] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 5.828087] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.828146] usb usb1: default language 0x0409 [ 5.828161] usb usb1: udev 1, busnum 1, minor = 0 [ 5.828166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.828173] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.828179] usb usb1: Product: EHCI Host Controller [ 5.828183] usb usb1: Manufacturer: Linux 3.0.18 ehci_hcd [ 5.828188] usb usb1: SerialNumber: 0000:00:1d.7 [ 5.828375] usb usb1: usb_probe_device [ 5.828385] usb usb1: configuration #1 chosen from 1 choice [ 5.828405] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 5.828480] hub 1-0:1.0: usb_probe_interface [ 5.828488] hub 1-0:1.0: usb_probe_interface - got id [ 5.828494] hub 1-0:1.0: USB hub found [ 5.828508] hub 1-0:1.0: 8 ports detected [ 5.828515] hub 1-0:1.0: standalone hub [ 5.828520] hub 1-0:1.0: no power switching (usb 1.0) [ 5.828527] hub 1-0:1.0: individual port over-current protection [ 5.828533] hub 1-0:1.0: power on to power good time: 20ms [ 5.828547] hub 1-0:1.0: local power source is good [ 5.828556] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 5.828687] drivers/usb/core/inode.c: creating file '001' [ 5.846157] acer_wmi: Brightness must be controlled by generic video driver [ 5.885625] uhci_hcd: USB Universal Host Controller Interface driver [ 5.885774] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.885797] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.885806] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.885835] drivers/usb/core/inode.c: creating file '002' [ 5.885854] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.885872] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.885884] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.885890] uhci_hcd 0000:00:1d.0: Performing full reset [ 5.885914] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 5.885935] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080 [ 5.886070] usb usb2: default language 0x0409 [ 5.886092] usb usb2: udev 1, busnum 2, minor = 128 [ 5.886100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.886109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.886117] usb usb2: Product: UHCI Host Controller [ 5.886124] usb usb2: Manufacturer: Linux 3.0.18 uhci_hcd [ 5.886131] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.886390] usb usb2: usb_probe_device [ 5.886400] usb usb2: configuration #1 chosen from 1 choice [ 5.886424] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 5.886501] hub 2-0:1.0: usb_probe_interface [ 5.886509] hub 2-0:1.0: usb_probe_interface - got id [ 5.886516] hub 2-0:1.0: USB hub found [ 5.886531] hub 2-0:1.0: 2 ports detected [ 5.886537] hub 2-0:1.0: standalone hub [ 5.886543] hub 2-0:1.0: no power switching (usb 1.0) [ 5.886550] hub 2-0:1.0: individual port over-current protection [ 5.886558] hub 2-0:1.0: power on to power good time: 2ms [ 5.886572] hub 2-0:1.0: local power source is good [ 5.886581] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 5.886712] drivers/usb/core/inode.c: creating file '001' [ 5.886814] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.886836] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.886847] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.886873] drivers/usb/core/inode.c: creating file '003' [ 5.886887] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.886906] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.886917] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.886924] uhci_hcd 0000:00:1d.1: Performing full reset [ 5.886948] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 5.886994] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060 [ 5.887134] usb usb3: default language 0x0409 [ 5.887156] usb usb3: udev 1, busnum 3, minor = 256 [ 5.887163] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.887171] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.887178] usb usb3: Product: UHCI Host Controller [ 5.887185] usb usb3: Manufacturer: Linux 3.0.18 uhci_hcd [ 5.887192] usb usb3: SerialNumber: 0000:00:1d.1 [ 5.887450] usb usb3: usb_probe_device [ 5.887461] usb usb3: configuration #1 chosen from 1 choice [ 5.887483] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 5.887554] hub 3-0:1.0: usb_probe_interface [ 5.887561] hub 3-0:1.0: usb_probe_interface - got id [ 5.887568] hub 3-0:1.0: USB hub found [ 5.887582] hub 3-0:1.0: 2 ports detected [ 5.887588] hub 3-0:1.0: standalone hub [ 5.887594] hub 3-0:1.0: no power switching (usb 1.0) [ 5.887600] hub 3-0:1.0: individual port over-current protection [ 5.887607] hub 3-0:1.0: power on to power good time: 2ms [ 5.887619] hub 3-0:1.0: local power source is good [ 5.887627] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 5.887734] drivers/usb/core/inode.c: creating file '001' [ 5.887829] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.887849] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.887859] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.887878] drivers/usb/core/inode.c: creating file '004' [ 5.887891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.887911] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.887923] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.887975] uhci_hcd 0000:00:1d.2: Performing full reset [ 5.887999] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 5.888070] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 [ 5.888180] usb usb4: default language 0x0409 [ 5.888202] usb usb4: udev 1, busnum 4, minor = 384 [ 5.888211] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.888219] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.888227] usb usb4: Product: UHCI Host Controller [ 5.888234] usb usb4: Manufacturer: Linux 3.0.18 uhci_hcd [ 5.888241] usb usb4: SerialNumber: 0000:00:1d.2 [ 5.888534] usb usb4: usb_probe_device [ 5.888546] usb usb4: configuration #1 chosen from 1 choice [ 5.888573] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 5.888653] hub 4-0:1.0: usb_probe_interface [ 5.888660] hub 4-0:1.0: usb_probe_interface - got id [ 5.888667] hub 4-0:1.0: USB hub found [ 5.888681] hub 4-0:1.0: 2 ports detected [ 5.888687] hub 4-0:1.0: standalone hub [ 5.888692] hub 4-0:1.0: no power switching (usb 1.0) [ 5.888699] hub 4-0:1.0: individual port over-current protection [ 5.888706] hub 4-0:1.0: power on to power good time: 2ms [ 5.888720] hub 4-0:1.0: local power source is good [ 5.888728] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 5.888850] drivers/usb/core/inode.c: creating file '001' [ 5.888947] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.888967] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.888977] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.888993] drivers/usb/core/inode.c: creating file '005' [ 5.889037] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.889055] uhci_hcd 0000:00:1d.3: detected 2 ports [ 5.889066] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.889073] uhci_hcd 0000:00:1d.3: Performing full reset [ 5.889095] uhci_hcd 0000:00:1d.3: supports USB remote wakeup [ 5.889141] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020 [ 5.889244] usb usb5: default language 0x0409 [ 5.889263] usb usb5: udev 1, busnum 5, minor = 512 [ 5.889271] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.889279] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.889287] usb usb5: Product: UHCI Host Controller [ 5.889293] usb usb5: Manufacturer: Linux 3.0.18 uhci_hcd [ 5.889300] usb usb5: SerialNumber: 0000:00:1d.3 [ 5.889557] usb usb5: usb_probe_device [ 5.889567] usb usb5: configuration #1 chosen from 1 choice [ 5.889589] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 5.889675] hub 5-0:1.0: usb_probe_interface [ 5.889683] hub 5-0:1.0: usb_probe_interface - got id [ 5.889689] hub 5-0:1.0: USB hub found [ 5.889703] hub 5-0:1.0: 2 ports detected [ 5.889709] hub 5-0:1.0: standalone hub [ 5.889715] hub 5-0:1.0: no power switching (usb 1.0) [ 5.889722] hub 5-0:1.0: individual port over-current protection [ 5.889730] hub 5-0:1.0: power on to power good time: 2ms [ 5.889744] hub 5-0:1.0: local power source is good [ 5.889752] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 5.889877] drivers/usb/core/inode.c: creating file '001' [ 5.928091] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 5.928102] hub 1-0:1.0: port 4: status 0501 change 0001 [ 5.986105] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.987075] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 [ 5.988085] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.990081] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.028091] hub 1-0:1.0: state 7 ports 8 chg 0010 evt 0000 [ 6.028116] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 6.079358] ehci_hcd 0000:00:1d.7: port 4 high speed [ 6.079371] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 6.130079] usb 1-4: new high speed USB device number 2 using ehci_hcd [ 6.164897] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.164922] ath9k 0000:02:00.0: setting latency timer to 64 [ 6.181235] ehci_hcd 0000:00:1d.7: port 4 high speed [ 6.181250] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 6.279850] usb 1-4: skipped 1 descriptor after configuration [ 6.279860] usb 1-4: skipped 6 descriptors after interface [ 6.279869] usb 1-4: skipped 1 descriptor after endpoint [ 6.279876] usb 1-4: skipped 9 descriptors after interface [ 6.280498] usb 1-4: default language 0x0409 [ 6.285877] usb 1-4: udev 2, busnum 1, minor = 1 [ 6.285886] usb 1-4: New USB device found, idVendor=064e, idProduct=a102 [ 6.285894] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 6.285901] usb 1-4: Product: WebCam [ 6.285907] usb 1-4: Manufacturer: SuYin [ 6.285912] usb 1-4: SerialNumber: CN0316-S30C-OV11-VA-R03.01.00 [ 6.286148] usb 1-4: usb_probe_device [ 6.286160] usb 1-4: configuration #1 chosen from 1 choice [ 6.286523] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 6.288139] usb 1-4: adding 1-4:1.1 (config #1, interface 1) [ 6.288302] drivers/usb/core/inode.c: creating file '002' [ 6.288356] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.496664] uvcvideo 1-4:1.0: usb_probe_interface [ 6.496677] uvcvideo 1-4:1.0: usb_probe_interface - got id [ 6.496737] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 6.514393] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input6 [ 6.514534] usbcore: registered new interface driver uvcvideo [ 6.514541] USB Video Class driver (v1.1.0) [ 6.613464] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 6.678798] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 6.699733] ath: EEPROM regdomain: 0x65 [ 6.699739] ath: EEPROM indicates we should expect a direct regpair map [ 6.699747] ath: Country alpha2 being used: 00 [ 6.699751] ath: Regpair used: 0x65 [ 6.703037] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 6.704067] Registered led device: ath9k-phy0 [ 6.704101] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8a60000, irq=17 [ 6.813953] usb 1-4: link qh4-0001/f5e91280 start 1 [1/0 us] [ 6.814084] usb 1-4: unlink qh4-0001/f5e91280 start 1 [1/0 us] [ 6.955042] usb usb2: suspend_rh (auto-stop) [ 6.955075] usb usb4: suspend_rh (auto-stop) [ 6.955102] usb usb5: suspend_rh (auto-stop) [ 7.205088] usb usb3: suspend_rh (auto-stop) [ 8.507527] EXT3-fs (sda1): using internal journal [ 9.391313] fuse init (API version 7.16) [ 10.380150] sed used greatest stack depth: 5908 bytes left [ 11.886957] rc used greatest stack depth: 5716 bytes left [ 14.613907] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [ 16.116037] Bluetooth: Core ver 2.16 [ 16.116099] NET: Registered protocol family 31 [ 16.116106] Bluetooth: HCI device and connection manager initialized [ 16.116114] Bluetooth: HCI socket layer initialized [ 16.116120] Bluetooth: L2CAP socket layer initialized [ 16.116234] Bluetooth: SCO socket layer initialized [ 16.207786] Bluetooth: RFCOMM TTY layer initialized [ 16.207802] Bluetooth: RFCOMM socket layer initialized [ 16.207809] Bluetooth: RFCOMM ver 1.11 [ 16.237515] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.237522] Bluetooth: BNEP filters: protocol multicast [ 18.165570] ehci_hcd 0000:00:1d.7: reused qh f5e91280 schedule [ 18.165584] usb 1-4: link qh4-0001/f5e91280 start 1 [1/0 us] [ 18.183665] usb 1-4: unlink qh4-0001/f5e91280 start 1 [1/0 us] [ 18.242800] sshd (2228): /proc/2228/oom_adj is deprecated, please use /proc/2228/oom_score_adj instead. [ 59.251868] wlan0: authenticate with 00:1e:e5:8c:c9:2a (try 1) [ 59.253977] wlan0: authenticated [ 59.288175] wlan0: associate with 00:1e:e5:8c:c9:2a (try 1) [ 59.290908] wlan0: RX AssocResp from 00:1e:e5:8c:c9:2a (capab=0x411 status=0 aid=2) [ 59.290924] wlan0: associated [ 186.111469] apt-check used greatest stack depth: 5644 bytes left
Offline
#32 2012-02-01 18:44:50
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
lsusb -v
Kod:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.00
iManufacturer 3 Linux 3.0.18 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 002: ID 064e:a102 Suyin Corp. Acer/Lenovo Webcam [CN0316]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x064e Suyin Corp.
idProduct 0xa102 Acer/Lenovo Webcam [CN0316]
bcdDevice 3.10
iManufacturer 2 SuYin
iProduct 1 WebCam
iSerial 3 CN0316-S30C-OV11-VA-R03.01.00
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 569
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 98mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 14 Video
bFunctionSubClass 3 Video Interface Collection
bFunctionProtocol 0
iFunction 5 Webcam
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 1 Video Control
bInterfaceProtocol 0
iInterface 5 Webcam
VideoControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdUVC 1.00
wTotalLength 103
dwClockFrequency 15.000000MHz
bInCollection 1
baInterfaceNr( 0) 1
VideoControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 2
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 5
iTerminal 0
VideoControl Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 4
guidExtensionCode {7033f028-1163-2e4a-ba2c-6890eb334016}
bNumControl 8
bNrPins 1
baSourceID( 0) 3
bControlSize 1
bmControls( 0) 0x0f
iExtension 0
VideoControl Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 5
guidExtensionCode {3fae1228-d7bc-114e-a357-6f1edef7d61d}
bNumControl 8
bNrPins 1
baSourceID( 0) 4
bControlSize 1
bmControls( 0) 0xff
iExtension 0
VideoControl Interface Descriptor:
bLength 18
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Camera Sensor
bAssocTerminal 0
iTerminal 0
wObjectiveFocalLengthMin 0
wObjectiveFocalLengthMax 0
wOcularFocalLength 0
bControlSize 3
bmControls 0x00000000
VideoControl Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 5 (PROCESSING_UNIT)
Warning: Descriptor too short
bUnitID 3
bSourceID 1
wMaxMultiplier 0
bControlSize 2
bmControls 0x0000173f
Brightness
Contrast
Hue
Saturation
Sharpness
Gamma
Backlight Compensation
Gain
Power Line Frequency
White Balance Temperature, Auto
iProcessing 0
bmVideoStandards 0x 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 6
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
VideoStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 1 (INPUT_HEADER)
bNumFormats 1
wTotalLength 323
bEndPointAddress 129
bmInfo 0
bTerminalLink 2
bStillCaptureMethod 2
bTriggerSupport 0
bTriggerUsage 0
bControlSize 1
bmaControls( 0) 27
VideoStreaming Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
bFormatIndex 1
bNumFrameDescriptors 5
guidFormat {59555932-0000-1000-8000-00aa00389b71}
bBitsPerPixel 16
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 1 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 1
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 480
dwMinBitRate 3072000
dwMaxBitRate 18432000
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 2
bmCapabilities 0x00
Still image unsupported
wWidth 352
wHeight 288
dwMinBitRate 1013760
dwMaxBitRate 6082560
dwMaxVideoFrameBufferSize 202752
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 3
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 240
dwMinBitRate 768000
dwMaxBitRate 4608000
dwMaxVideoFrameBufferSize 153600
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 4
bmCapabilities 0x00
Still image unsupported
wWidth 176
wHeight 144
dwMinBitRate 253440
dwMaxBitRate 1520640
dwMaxVideoFrameBufferSize 50688
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 5
bmCapabilities 0x00
Still image unsupported
wWidth 160
wHeight 120
dwMinBitRate 192000
dwMaxBitRate 1152000
dwMaxVideoFrameBufferSize 38400
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 3 (STILL_IMAGE_FRAME)
bEndpointAddress 0
bNumImageSizePatterns 5
wWidth( 0) 640
wHeight( 0) 480
wWidth( 1) 352
wHeight( 1) 288
wWidth( 2) 320
wHeight( 2) 240
wWidth( 3) 176
wHeight( 3) 144
wWidth( 4) 160
wHeight( 4) 120
bNumCompressionPatterns 5
VideoStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 13 (COLORFORMAT)
bColorPrimaries 1 (BT.709,sRGB)
bTransferCharacteristics 1 (BT.709)
bMatrixCoefficients 4 (SMPTE 170M (BT.601))
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0080 1x 128 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0100 1x 256 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0320 1x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0b20 2x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1320 3x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 6
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.00
iManufacturer 3 Linux 3.0.18 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.00
iManufacturer 3 Linux 3.0.18 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.00
iManufacturer 3 Linux 3.0.18 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.00
iManufacturer 3 Linux 3.0.18 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup EnabledOffline
#33 2012-02-01 19:04:22
NIC - Członek DUG
Re: Kompilacja karty graficznej na sztywno
Ok. Mam dziwne wrażenie że Twój laptop nie jest obsługiwany przez ten moduł.
Kod:
ls /sys/class/wmi
Powinny się pojawić na tej liście (prosto ze źródeł)
Kod:
/*
* Acer ACPI method GUIDs
*/
#define AMW0_GUID1 "67C3371D-95A3-4C37-BB61-DD47B491DAAB"
#define AMW0_GUID2 "431F16ED-0C2B-444C-B267-27DEB140CF9C"
#define WMID_GUID1 "6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3"
#define WMID_GUID2 "95764E09-FB56-4E83-B31A-37761F60994A"
#define WMID_GUID3 "61EF69EA-865C-4BC3-A502-A0DEBA0CB531"
/*
* Acer ACPI event GUIDs
*/
#define ACERWMID_EVENT_GUID "676AA15E-6A47-4D9F-A2CC-1E6D18D14026"
MODULE_ALIAS("wmi:67C3371D-95A3-4C37-BB61-DD47B491DAAB");
MODULE_ALIAS("wmi:6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3");
MODULE_ALIAS("wmi:676AA15E-6A47-4D9F-A2CC-1E6D18D14026");Jeśli ich nie będzie to będzie raczej źle. Sprawdziłem i ten moduł: "acer-wmi" odpowiada za utworzenie tych rfkilli (softwarowo-klawiaturowy przycisk włącz/wyłącz urzędzenie) dla WiFi i Bluetootha. Ty masz w tej chwili tylko dla WiFi, więc nie można włączyć Twojego Bluetootha. W razie czego możesz sobie zmodyfikować owy moduł? (chyba że zdążyli dodać Twój laptop i w moim wypisie znajdziesz te klucze a w swoim źródle nie: drivers/platform/x86/acer-wmi.c)
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#34 2012-02-01 19:06:52
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Kompilacja karty graficznej na sztywno
Na jakimś innym kernelu działał?
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#35 2012-02-01 20:42:32
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Kompilacja karty graficznej na sztywno
[quote=Pablik]w lspci -k 3 urządzenia nie mają "Kernel driver in use" to znaczy ze niektóre nie potrzebują czy nie są zainstalowane poprostu ??
Kod:
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
Subsystem: Acer Incorporated [ALI] Device 0349
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0349[/quote]
Już kilka razy widziałem to pytanie z twojej strony, ale nikt nie raczył odpowiedzieć (bo pewnie nie wiedział ;P). Odp: Nie są zainstalowane po prostu. U mnie są wszystkie:
Kod:
pablo@lena:~$ lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 21da
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Lenovo Device 21da
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 21da
Kernel driver in use: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21ce
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Lenovo Device 21da
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 21da
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Lenovo Device 21da
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
Subsystem: Lenovo Device 21da
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
Subsystem: Lenovo Device 21da
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 21da
Kernel driver in use: i801_smbus
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN
Kernel driver in use: iwlwifi
0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 04)
Subsystem: Lenovo Device 21da
Kernel driver in use: sdhci-pciMówię wszystkie, bo do tego:
Kod:
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
Subsystem: Lenovo Device 21damam te moduły [tt]iTCO_vendor_support, iTCO_wdt[/tt] które mi wstają przy starcie i są widoczne z polecenia lsmod... Wydaje mi się, że twój lapek to jakaś nówka na ulicy i jeszcze nie wszystko jest stworzone do niego... Miałem te same problemy jak tylko kupiłem oba moje lapki :/
Ostatnio edytowany przez P@blo (2012-02-01 20:43:53)
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#36 2012-02-01 21:11:57
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
[quote=NIC]Ok. Mam dziwne wrażenie że Twój laptop nie jest obsługiwany przez ten moduł.
Kod:
ls /sys/class/wmi
[/quote]
ls /sys/class/wmi
Kod:
36916B91-1A64-4583-84D0-53830FB9108D A7C9A0B7-4C9D-4C72-83BB-53A3459171DF 5923DD45-0480-4ED5-B61A-C9EC6C90E26A AAE04F7B-B3C5-4865-95D6-9FAC7FF3E92B 653A064F-A23A-485F-B3D9-13F6532A0182 CC1A61AC-4256-41A3-B9E0-05A445ADE2F5 6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 CFF94C79-6C77-4AF7-AC56-7DD0CE01C997 79772EC5-04B1-4BFD-843C-61E7F77B6CC9 DB85B1A7-069A-4ABB-A2B5-D186A21B80F1 83B9D139-CE71-45DB-A7A6-2628D3A65F4C E78C4453-0227-4861-9EDE-F5600B4A3D39 95764E09-FB56-4E83-B31A-37761F60994A FAAA1397-1188-448F-8516-9A07987DD38A
[quote=ArnVaker]Na jakimś innym kernelu działał?[/quote]
nie dopiero pierwszy raz się z nim mecze ;(
To jak można sprawdzić jakich modułów potrzebują te sprzęty
Kod:
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
Subsystem: Acer Incorporated [ALI] Device 0349
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0349Ostatnio edytowany przez Pablik (2012-02-01 21:15:45)
Offline
#37 2012-02-01 21:15:12
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Kompilacja karty graficznej na sztywno
[quote=Pablik][quote=ArnVaker]Na jakimś innym kernelu działał?[/quote]
nie dopiero pierwszy raz się z nim mecze ;([/quote]
Arnowi chodziło o to co mi wcześniej...
[quote=/me]A ogólnie blut działa? Na innych jajkach? Wydaje mi się, że blut może korzystać z czegoś w sekcji MISC, albo cholera wie gdzie... Jądro to nieprzelewki... Każdy sprzęt inny jest...[/quote]
Czy na jakimkolwiek jajku to działało? Najlepiej dystrybucyjnym?
Ostatnio edytowany przez P@blo (2012-02-01 21:16:37)
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#38 2012-02-01 21:17:44
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
[quote=P@blo][quote=Pablik][quote=ArnVaker]Na jakimś innym kernelu działał?[/quote]
nie dopiero pierwszy raz się z nim mecze ;([/quote]
Arnowi chodziło o to co mi wcześniej... Czy na jakimkolwiek jajku to działało? Najlepiej dystrybucyjnym?[/quote]
Nie odkąd wgrałem linux'a to nie działało, jak i inne rzeczy np kamera czy czytnik kart SD teraz już wszystko ok tylko mi Bluetooth został
Offline
#39 2012-02-01 21:18:55
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Kompilacja karty graficznej na sztywno
To dla mnie problem rozwiązany...
[quote=/me]Wydaje mi się, że twój lapek to jakaś nówka na ulicy i jeszcze nie wszystko jest stworzone do niego... Miałem te same problemy jak tylko kupiłem oba moje lapki :/[/quote]
Panowie, co wy na to?
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#40 2012-02-01 21:40:21
NIC - Członek DUG
Re: Kompilacja karty graficznej na sztywno
Z tego co widzę kernel 3.2 ma zmiany w tym module pod Twój laptop. Wypróbuj.
PS. Panowie, jak jądro czegoś nie ma, to to dodajmy. Możliwości są :)
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#41 2012-02-01 21:42:44
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
no mógł bym spróbować ale, potrzebuje patcha imq a on jest max pod 3.1 ;( można jakoś przerzucić moduły do starszego jajka ?
// pytanko jeszcze jak mam config'a z 3.0 i załaduje go na źródle 3.2 to w menuconfig będą dostępne moduły z 3.2 tak ?
Ostatnio edytowany przez Pablik (2012-02-01 21:46:22)
Offline
#42 2012-02-01 22:07:39
NIC - Członek DUG
Re: Kompilacja karty graficznej na sztywno
// pytanko jeszcze jak mam config'a z 3.0 i załaduje go na źródle 3.2 to w menuconfig będą dostępne moduły z 3.2 tak ?[/quote]
Tak.
Potrzebujesz tylko moduł: drivers/platform/x86/acer-wmi.c więc spokojnie możesz go ukraść z kernela 3.2 i powinno się kompilować.
Dla pewności w kodzie znajdź sobie tekst "Acer Laptop ACPI-WMI Extras" i doklej doń swój pseudonim, będzie wiadomo czy się faktycznie skompilował i załadował.
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#43 2012-02-01 22:34:44
P@blo - Nadworny matematyk
- P@blo
- Nadworny matematyk
- Skąd: Wrocław v Jasło
- Zarejestrowany: 2010-11-11
Re: Kompilacja karty graficznej na sztywno
[quote=Pablik]no mógł bym spróbować ale, potrzebuje patcha imq a on jest max pod 3.1 ;( można jakoś przerzucić moduły do starszego jajka ?[/quote]
Że tak się wtrącę... Potrzebny jest ci ten patch imq? Korzystasz z niego gdzieś?
Ostatnio edytowany przez P@blo (2012-02-01 22:35:25)
[tt]ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
| Debian: sid | Arch: amd64 | Sound: alsa |
| No DE | WM: DWM | DM: .bash_profile | BIOS+MBR |[/tt]
Offline
#44 2012-02-01 22:46:26
rychu - elektryk dyżurny
- rychu
- elektryk dyżurny
- Skąd: gdańsk
- Zarejestrowany: 2004-12-28
Re: Kompilacja karty graficznej na sztywno
no właśnie, po cholerę ci to imq na netbóku?
linux regd. user #248790
Offline
#45 2012-02-01 23:29:45
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
[quote=P@blo][quote=Pablik]no mógł bym spróbować ale, potrzebuje patcha imq a on jest max pod 3.1 ;( można jakoś przerzucić moduły do starszego jajka ?[/quote]
Że tak się wtrącę... Potrzebny jest ci ten patch imq? Korzystasz z niego gdzieś?[/quote]
Testuje na nim moje skrypty do kolejkowania
wgrałem już to jajko 3.2.2 i dalej nic ;(
lsusb -v
Kod:
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1320 3x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 6
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.2 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.2 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.2 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.2 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.2 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self PoweredOffline
#46 2012-02-01 23:30:55
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
dmesg
Kod:
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.2 (root@Notebook) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Wed Feb 1 23:18:32 CET 2012 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f494000 (usable) [ 0.000000] BIOS-e820: 000000003f494000 - 000000003f4bf000 (reserved) [ 0.000000] BIOS-e820: 000000003f4bf000 - 000000003f578000 (usable) [ 0.000000] BIOS-e820: 000000003f578000 - 000000003f5bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f5bf000 - 000000003f5ed000 (usable) [ 0.000000] BIOS-e820: 000000003f5ed000 - 000000003f5ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f5ff000 - 000000003f600000 (usable) [ 0.000000] BIOS-e820: 000000003f600000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Acer AO532h /AO532h , BIOS V1.26 04/28/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3f600 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-through [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF00000 mask 0FFF00000 write-protect [ 0.000000] 1 base 000000000 mask 0E0000000 write-back [ 0.000000] 2 base 020000000 mask 0E0000000 write-back [ 0.000000] 3 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009e000] 9e000 size 4096 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 3f5fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 3f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: DSDT 3f5f2000 07B21 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: FACS 3f586000 00040 [ 0.000000] ACPI: HPET 3f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 3f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 3f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SLIC 3f5f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 3f5f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT 3f5ee000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: WDAT 3f5ed000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f494 [ 0.000000] 0: 0x0003f4bf -> 0x0003f578 [ 0.000000] 0: 0x0003f5bf -> 0x0003f5ed [ 0.000000] 0: 0x0003f5ff -> 0x0003f600 [ 0.000000] On node 0 totalpages: 259339 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 31873 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6800000 s25216 r0 d23936 u2097152 [ 0.000000] pcpu-alloc: s25216 r0 d23936 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257310 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.2 root=/dev/sda1 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f600) [ 0.000000] Memory: 1020740k/1038336k available (4495k kernel code, 16616k reserved, 2091k data, 448k init, 128504k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff67000 - 0xfffff000 ( 608 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc166f000 - 0xc16df000 ( 448 kB) [ 0.000000] .data : 0xc1463f72 - 0xc166ec40 (2091 kB) [ 0.000000] .text : 0xc1000000 - 0xc1463f72 (4495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.880 MHz processor. [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.76 BogoMIPS (lpj=1662880) [ 0.001013] pid_max: default: 32768 minimum: 301 [ 0.001085] Mount-cache hash table entries: 512 [ 0.002058] Disabled fast string operations [ 0.002067] CPU: Physical Processor ID: 0 [ 0.002070] CPU: Processor Core ID: 0 [ 0.002075] mce: CPU supports 5 MCE banks [ 0.002089] using mwait in idle threads. [ 0.002182] Freeing SMP alternatives: 16k freed [ 0.002199] ACPI: Core revision 20110623 [ 0.011090] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.011574] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.021633] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a [ 0.021998] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.021998] ... version: 3 [ 0.021998] ... bit width: 40 [ 0.021998] ... generic registers: 2 [ 0.021998] ... value mask: 000000ffffffffff [ 0.021998] ... max period: 000000007fffffff [ 0.021998] ... fixed-purpose events: 3 [ 0.021998] ... event mask: 0000000700000003 [ 0.035038] CPU 1 irqstacks, hard=f64ca000 soft=f64cc000 [ 0.035044] Booting Node 0, Processors #1 Ok. [ 0.035050] smpboot cpu 1: start_ip = 9e000 [ 0.001999] Initializing CPU#1 [ 0.001999] Disabled fast string operations [ 0.107017] Brought up 2 CPUs [ 0.107026] Total of 2 processors activated (6650.90 BogoMIPS). [ 0.107649] devtmpfs: initialized [ 0.108159] NET: Registered protocol family 16 [ 0.108420] kworker/u:0 used greatest stack depth: 7492 bytes left [ 0.108679] kworker/u:0 used greatest stack depth: 7164 bytes left [ 0.109267] EISA bus registered [ 0.109267] ACPI: bus type pci registered [ 0.109493] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.109493] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.109493] PCI: Using MMCONFIG for extended config space [ 0.109493] PCI: Using configuration type 1 for base access [ 0.110713] kworker/u:0 used greatest stack depth: 7004 bytes left [ 0.127434] bio: create slab <bio-0> at 0 [ 0.127673] ACPI: Added _OSI(Module Device) [ 0.127673] ACPI: Added _OSI(Processor Device) [ 0.127673] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.127673] ACPI: Added _OSI(Processor Aggregator Device) [ 0.130683] ACPI: EC: Look up EC in DSDT [ 0.133978] ACPI: Executed 1 blocks of module-level executable AML code [ 0.137554] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.138331] ACPI: SSDT 3f4b7c90 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.139093] ACPI: Dynamic OEM Table Load: [ 0.139101] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.139337] ACPI: SSDT 3f4b6e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.140057] ACPI: Dynamic OEM Table Load: [ 0.140065] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.146369] ACPI: SSDT 3f4b7f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.147112] ACPI: Dynamic OEM Table Load: [ 0.147120] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.147349] ACPI: SSDT 3f4b5f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.148073] ACPI: Dynamic OEM Table Load: [ 0.148081] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.154954] ACPI: Interpreter enabled [ 0.154960] ACPI: (supports S0 S5) [ 0.154992] ACPI: Using IOAPIC for interrupt routing [ 0.289085] ACPI: Power Resource [FN00] (on) [ 0.290066] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.290198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.291034] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359) [ 0.291052] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.291056] _OSC request data:1 8 1f [ 0.291067] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.292554] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.292563] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.292570] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.292578] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] [ 0.292603] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600 [ 0.292663] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300 [ 0.292679] pci 0000:00:02.0: reg 10: [mem 0x58180000-0x581fffff] [ 0.292689] pci 0000:00:02.0: reg 14: [io 0x60c0-0x60c7] [ 0.292699] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref] [ 0.292709] pci 0000:00:02.0: reg 1c: [mem 0x58000000-0x580fffff] [ 0.292757] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380 [ 0.292771] pci 0000:00:02.1: reg 10: [mem 0x58100000-0x5817ffff] [ 0.292889] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.292920] pci 0000:00:1b.0: reg 10: [mem 0x58200000-0x58203fff 64bit] [ 0.293054] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.293064] pci 0000:00:1b.0: PME# disabled [ 0.293107] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.293239] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.293247] pci 0000:00:1c.0: PME# disabled [ 0.293288] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.293417] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.293426] pci 0000:00:1c.1: PME# disabled [ 0.293470] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.293539] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f] [ 0.293594] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.293664] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f] [ 0.293719] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.293788] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f] [ 0.293844] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.293913] pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f] [ 0.294014] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.294047] pci 0000:00:1d.7: reg 10: [mem 0x58204400-0x582047ff] [ 0.294175] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.294185] pci 0000:00:1d.7: PME# disabled [ 0.294217] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.294331] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 [ 0.294496] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 [ 0.294526] pci 0000:00:1f.2: reg 10: [io 0x60b8-0x60bf] [ 0.294543] pci 0000:00:1f.2: reg 14: [io 0x60cc-0x60cf] [ 0.294560] pci 0000:00:1f.2: reg 18: [io 0x60b0-0x60b7] [ 0.294577] pci 0000:00:1f.2: reg 1c: [io 0x60c8-0x60cb] [ 0.294594] pci 0000:00:1f.2: reg 20: [io 0x60a0-0x60af] [ 0.294612] pci 0000:00:1f.2: reg 24: [mem 0x58204000-0x582043ff] [ 0.294679] pci 0000:00:1f.2: PME# supported from D3hot [ 0.294687] pci 0000:00:1f.2: PME# disabled [ 0.294715] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.294784] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f] [ 0.294932] pci 0000:01:00.0: [1969:1062] type 0 class 0x000200 [ 0.294976] pci 0000:01:00.0: reg 10: [mem 0x57000000-0x5703ffff 64bit] [ 0.294999] pci 0000:01:00.0: reg 18: [io 0x5000-0x507f] [ 0.295158] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.295168] pci 0000:01:00.0: PME# disabled [ 0.296993] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.297003] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.297012] pci 0000:00:1c.0: bridge window [mem 0x57000000-0x57ffffff] [ 0.297025] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref] [ 0.297132] pci 0000:02:00.0: [168c:002a] type 0 class 0x000280 [ 0.297171] pci 0000:02:00.0: reg 10: [mem 0x56000000-0x5600ffff 64bit] [ 0.297343] pci 0000:02:00.0: supports D1 [ 0.297349] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.297358] pci 0000:02:00.0: PME# disabled [ 0.297393] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.297412] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.297421] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.297430] pci 0000:00:1c.1: bridge window [mem 0x56000000-0x56ffffff] [ 0.297443] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref] [ 0.297541] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.297561] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.297568] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.297575] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.297582] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode) [ 0.297610] pci_bus 0000:00: on NUMA node 0 [ 0.297619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.297927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.298064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.298337] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359) [ 0.298354] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.298359] _OSC request data:1 1f 1f [ 0.298369] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.298488] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359) [ 0.298504] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.298508] _OSC request data:1 0 1d [ 0.298518] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d [ 0.298523] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.305545] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.305681] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.305811] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.305940] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.306117] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.306249] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.306381] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.306512] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.306958] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.307009] vgaarb: loaded [ 0.307014] vgaarb: bridge control possible 0000:00:02.0 [ 0.307403] SCSI subsystem initialized [ 0.307649] libata version 3.00 loaded. [ 0.309889] wmi: Mapper loaded [ 0.310000] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.310007] PCI: Using ACPI for IRQ routing [ 0.320213] PCI: pci_cache_line_size set to 64 bytes [ 0.320320] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.320327] reserve RAM buffer: 000000003f494000 - 000000003fffffff [ 0.320334] reserve RAM buffer: 000000003f578000 - 000000003fffffff [ 0.320340] reserve RAM buffer: 000000003f5ed000 - 000000003fffffff [ 0.320346] reserve RAM buffer: 000000003f600000 - 000000003fffffff [ 0.320814] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.320827] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.320838] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.325132] Switching to clocksource hpet [ 0.325301] pnp: PnP ACPI init [ 0.325318] ACPI: bus type pnp registered [ 0.325913] pnp 00:00: [bus 00-ff] [ 0.325922] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.325928] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.325934] pnp 00:00: [io 0x0d00-0xffff window] [ 0.325940] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.325946] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.325952] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.325958] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.325964] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.325969] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.325976] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.325982] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.325987] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.325993] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.325999] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.326029] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.326036] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.326042] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.326048] pnp 00:00: [mem 0x40000000-0xfebfffff window] [ 0.326224] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.386295] pnp 00:01: [io 0x0068] [ 0.386302] pnp 00:01: [io 0x006c] [ 0.386308] pnp 00:01: [io 0x164e-0x164f] [ 0.386312] pnp 00:01: [io 0x0061] [ 0.386317] pnp 00:01: [io 0x0070] [ 0.386322] pnp 00:01: [io 0x0080] [ 0.386327] pnp 00:01: [io 0x0092] [ 0.386331] pnp 00:01: [io 0x00b2-0x00b3] [ 0.386336] pnp 00:01: [io 0x0063] [ 0.386341] pnp 00:01: [io 0x0065] [ 0.386346] pnp 00:01: [io 0x0067] [ 0.386351] pnp 00:01: [io 0x0600-0x060f] [ 0.386356] pnp 00:01: [io 0x0610] [ 0.386360] pnp 00:01: [io 0x0800-0x080f] [ 0.386366] pnp 00:01: [io 0x0810-0x0817] [ 0.386371] pnp 00:01: [io 0x0400-0x047f] [ 0.386376] pnp 00:01: [io 0x0500-0x053f] [ 0.386381] pnp 00:01: [io 0xff2c-0xff2f] [ 0.386387] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.386392] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.386398] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.386403] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.386408] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.386414] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.386419] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.386618] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.386627] system 00:01: [io 0x0600-0x060f] has been reserved [ 0.386634] system 00:01: [io 0x0610] has been reserved [ 0.386640] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.386647] system 00:01: [io 0x0810-0x0817] has been reserved [ 0.386654] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.386660] system 00:01: [io 0x0500-0x053f] has been reserved [ 0.386667] system 00:01: [io 0xff2c-0xff2f] has been reserved [ 0.386675] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.386683] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.386690] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.386697] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.386704] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.386711] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.386718] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.386727] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.386754] pnp 00:02: [io 0x0000-0x001f] [ 0.386760] pnp 00:02: [io 0x0081-0x0091] [ 0.386765] pnp 00:02: [io 0x0093-0x009f] [ 0.386771] pnp 00:02: [io 0x00c0-0x00df] [ 0.386777] pnp 00:02: [dma 4] [ 0.386890] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.386950] pnp 00:03: [io 0x0070-0x0077] [ 0.387090] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.387232] pnp 00:04: [irq 0 disabled] [ 0.387251] pnp 00:04: [irq 8] [ 0.387257] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.387380] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.387410] pnp 00:05: [io 0x00f0] [ 0.387422] pnp 00:05: [irq 13] [ 0.387543] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.387572] pnp 00:06: [mem 0xff800000-0xffffffff] [ 0.387687] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 0.387767] pnp 00:07: [io 0x0060] [ 0.387773] pnp 00:07: [io 0x0064] [ 0.387786] pnp 00:07: [irq 1] [ 0.387913] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.388047] pnp 00:08: [irq 12] [ 0.388179] pnp 00:08: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active) [ 0.388471] pnp: PnP ACPI: found 9 devices [ 0.388477] ACPI: ACPI bus type pnp unregistered [ 0.432212] PCI: max bus depth: 1 pci_try_num: 2 [ 0.432264] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.432273] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.432284] pci 0000:00:1c.0: bridge window [mem 0x57000000-0x57ffffff] [ 0.432294] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref] [ 0.432307] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.432314] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.432325] pci 0000:00:1c.1: bridge window [mem 0x56000000-0x56ffffff] [ 0.432335] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref] [ 0.432347] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.432400] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.432411] pci 0000:00:1c.0: setting latency timer to 64 [ 0.432434] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.432444] pci 0000:00:1c.1: setting latency timer to 64 [ 0.432458] pci 0000:00:1e.0: setting latency timer to 64 [ 0.432466] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.432472] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.432478] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.432485] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff] [ 0.432491] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.432497] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff] [ 0.432503] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref] [ 0.432510] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.432516] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff] [ 0.432522] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref] [ 0.432529] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.432535] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.432541] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.432547] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff] [ 0.432618] NET: Registered protocol family 2 [ 0.432723] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.433213] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.434179] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.434605] TCP: Hash tables configured (established 131072 bind 65536) [ 0.434611] TCP reno registered [ 0.434620] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.434639] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.434793] NET: Registered protocol family 1 [ 0.434988] RPC: Registered named UNIX socket transport module. [ 0.434994] RPC: Registered udp transport module. [ 0.434998] RPC: Registered tcp transport module. [ 0.435028] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.435055] pci 0000:00:02.0: Boot video device [ 0.435083] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 0.435088] pci 0000:00:1d.0: Performing full reset [ 0.435114] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.435119] pci 0000:00:1d.1: Performing full reset [ 0.435144] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.435149] pci 0000:00:1d.2: Performing full reset [ 0.435173] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.435179] pci 0000:00:1d.3: Performing full reset [ 0.435366] PCI: CLS 64 bytes, default 64 [ 0.435404] Simple Boot Flag at 0x44 set to 0x1 [ 0.437337] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107 [ 0.437352] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107 [ 0.437476] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.437620] Intel AES-NI instructions are not detected. [ 0.441959] highmem bounce pool size: 64 pages [ 0.441971] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.458681] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.459416] msgmni has been set to 1742 [ 0.461526] NET: Registered protocol family 38 [ 0.461825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.461834] io scheduler noop registered [ 0.461852] io scheduler cfq registered (default) [ 0.461968] xz_dec_test: module loaded [ 0.461972] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 0.462248] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.462331] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.462499] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.462571] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.523049] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.583141] ACPI: AC Adapter [AC] (off-line) [ 0.583426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.583437] ACPI: Power Button [PWRB] [ 0.583591] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.583600] ACPI: Sleep Button [SLPB] [ 0.583755] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.583808] ACPI: Lid Switch [LID0] [ 0.583993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.584025] ACPI: Power Button [PWRF] [ 0.584271] ACPI: Fan [FAN] (on) [ 0.584756] Marking TSC unstable due to TSC halts in idle [ 0.584778] ACPI: acpi_idle registered with cpuidle [ 0.587269] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.587301] ACPI: Thermal Zone [THRM] (45 C) [ 1.214232] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.214250] ACPI: Battery Slot [BAT0] (battery present) [ 1.214681] Linux agpgart interface v0.103 [ 1.214760] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 1.215076] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.215419] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.215698] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 1.215809] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.215815] Hangcheck: Using getrawmonotonic(). [ 1.215920] [drm] Initialized drm 1.1.0 20060810 [ 1.215958] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.215967] i915 0000:00:02.0: setting latency timer to 64 [ 1.285122] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 1.285133] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.285137] [drm] Driver supports precise vblank timestamp query. [ 1.285205] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.338975] fixme: max PWM is zero. [ 1.609276] [drm] initialized overlay support [ 1.628291] fbcon: inteldrmfb (fb0) is primary device [ 2.071308] Console: switching to colour frame buffer device 128x37 [ 2.077751] fb0: inteldrmfb frame buffer device [ 2.077756] drm: registered panic notifier [ 2.383143] acpi device:28: registered as cooling_device3 [ 2.383525] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 2.383539] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 2.383642] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.386323] loop: module loaded [ 2.386934] ahci 0000:00:1f.2: version 3.0 [ 2.386961] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.387144] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 2.387205] ahci: SSS flag set, parallel bus scan disabled [ 2.387254] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 2.387263] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 2.387273] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.388962] scsi0 : ahci [ 2.389290] scsi1 : ahci [ 2.389535] scsi2 : ahci [ 2.389783] scsi3 : ahci [ 2.390378] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 43 [ 2.390387] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 43 [ 2.390393] ata3: DUMMY [ 2.390397] ata4: DUMMY [ 2.391336] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.391356] atl1c 0000:01:00.0: setting latency timer to 64 [ 2.462816] atl1c 0000:01:00.0: version 1.0.1.0-NAPI [ 2.463275] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 2.477179] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.477245] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.477636] mousedev: PS/2 mouse device common for all mice [ 2.477776] rtc_cmos 00:03: RTC can wake from S4 [ 2.477993] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.478059] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.478144] i2c /dev entries driver [ 2.479888] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.480278] Linux video capture interface: v2.00 [ 2.480797] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.480984] EISA: Probing bus 0 at eisa.0 [ 2.480990] EISA: Cannot allocate resource for mainboard [ 2.480996] Cannot allocate resource for EISA slot 1 [ 2.481023] Cannot allocate resource for EISA slot 2 [ 2.481028] Cannot allocate resource for EISA slot 3 [ 2.481033] Cannot allocate resource for EISA slot 4 [ 2.481038] Cannot allocate resource for EISA slot 5 [ 2.481043] Cannot allocate resource for EISA slot 6 [ 2.481047] Cannot allocate resource for EISA slot 7 [ 2.481052] Cannot allocate resource for EISA slot 8 [ 2.481057] EISA: Detected 0 cards. [ 2.481687] cpuidle: using governor ladder [ 2.481883] acerhdf: Acer Aspire One Fan driver, v.0.5.24 [ 2.481919] acerhdf: unknown (unsupported) BIOS version Acer /AO532h /V1.26, please report, aborting! [ 2.482563] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.482675] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 2.482728] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 2.493826] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.499984] ALSA device list: [ 2.499993] #0: HDA Intel at 0x58200000 irq 44 [ 2.499999] Netfilter messages via NETLINK v0.30. [ 2.500058] nf_conntrack version 0.5.0 (15949 buckets, 63796 max) [ 2.500529] ctnetlink v0.93: registering with nfnetlink. [ 2.501706] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.501800] TCP cubic registered [ 2.501808] NET: Registered protocol family 17 [ 2.501840] Using IPI Shortcut mode [ 2.695047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.695883] ata1.00: unexpected _GTF length (4) [ 2.742039] ata1.00: ATA-8: ST9160314AS, 0001SDM1, max UDMA/133 [ 2.742049] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.743747] ata1.00: unexpected _GTF length (4) [ 2.744072] ata1.00: configured for UDMA/133 [ 2.744313] scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0001 PQ: 0 ANSI: 5 [ 2.744823] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.745043] sd 0:0:0:0: [sda] Write Protect is off [ 2.745055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.745134] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.745230] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.765709] sda: sda1 sda2 sda3 < sda5 > [ 2.766928] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.050042] ata2: SATA link down (SStatus 0 SControl 300) [ 3.223085] kjournald starting. Commit interval 5 seconds [ 3.223158] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 3.223183] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 3.223242] Freeing unused kernel memory: 448k freed [ 3.784708] modprobe used greatest stack depth: 6360 bytes left [ 4.005856] stty used greatest stack depth: 5928 bytes left [ 4.306446] mount used greatest stack depth: 5792 bytes left [ 6.103035] usbcore: registered new interface driver usbfs [ 6.103132] usbcore: registered new interface driver hub [ 6.103674] usbcore: registered new device driver usb [ 6.132712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.132723] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 6.132809] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.132857] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.132868] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.132927] drivers/usb/core/inode.c: creating file 'devices' [ 6.132940] drivers/usb/core/inode.c: creating file '001' [ 6.132952] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 6.132973] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 6.132986] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 6.133066] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 6.133090] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.133105] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 6.137007] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 6.137035] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 6.137080] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58204400 [ 6.137095] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 6.140999] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 6.141636] acer_wmi: Acer Laptop ACPI-WMI Extras [ 6.147037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.147106] usb usb1: default language 0x0409 [ 6.147124] usb usb1: udev 1, busnum 1, minor = 0 [ 6.147131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.147139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.147147] usb usb1: Product: EHCI Host Controller [ 6.147153] usb usb1: Manufacturer: Linux 3.2.2 ehci_hcd [ 6.147160] usb usb1: SerialNumber: 0000:00:1d.7 [ 6.147354] usb usb1: usb_probe_device [ 6.147364] usb usb1: configuration #1 chosen from 1 choice [ 6.147399] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 6.147485] hub 1-0:1.0: usb_probe_interface [ 6.147493] hub 1-0:1.0: usb_probe_interface - got id [ 6.147499] hub 1-0:1.0: USB hub found [ 6.147513] hub 1-0:1.0: 8 ports detected [ 6.147519] hub 1-0:1.0: standalone hub [ 6.147525] hub 1-0:1.0: no power switching (usb 1.0) [ 6.147532] hub 1-0:1.0: individual port over-current protection [ 6.147539] hub 1-0:1.0: power on to power good time: 20ms [ 6.147554] hub 1-0:1.0: local power source is good [ 6.147562] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 6.147825] drivers/usb/core/inode.c: creating file '001' [ 6.191704] uhci_hcd: USB Universal Host Controller Interface driver [ 6.191800] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.191822] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.191832] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.191852] drivers/usb/core/inode.c: creating file '002' [ 6.191866] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.191884] uhci_hcd 0000:00:1d.0: detected 2 ports [ 6.191895] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 6.191902] uhci_hcd 0000:00:1d.0: Performing full reset [ 6.191924] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 6.191945] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080 [ 6.192065] usb usb2: default language 0x0409 [ 6.192083] usb usb2: udev 1, busnum 2, minor = 128 [ 6.192090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.192098] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.192105] usb usb2: Product: UHCI Host Controller [ 6.192112] usb usb2: Manufacturer: Linux 3.2.2 uhci_hcd [ 6.192118] usb usb2: SerialNumber: 0000:00:1d.0 [ 6.192318] usb usb2: usb_probe_device [ 6.192327] usb usb2: configuration #1 chosen from 1 choice [ 6.192347] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 6.192427] hub 2-0:1.0: usb_probe_interface [ 6.192435] hub 2-0:1.0: usb_probe_interface - got id [ 6.192442] hub 2-0:1.0: USB hub found [ 6.192455] hub 2-0:1.0: 2 ports detected [ 6.192461] hub 2-0:1.0: standalone hub [ 6.192467] hub 2-0:1.0: no power switching (usb 1.0) [ 6.192473] hub 2-0:1.0: individual port over-current protection [ 6.192481] hub 2-0:1.0: power on to power good time: 2ms [ 6.192495] hub 2-0:1.0: local power source is good [ 6.192504] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 6.192639] drivers/usb/core/inode.c: creating file '001' [ 6.192732] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.192751] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6.192760] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.192776] drivers/usb/core/inode.c: creating file '003' [ 6.192787] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 6.192803] uhci_hcd 0000:00:1d.1: detected 2 ports [ 6.192814] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 6.192820] uhci_hcd 0000:00:1d.1: Performing full reset [ 6.192841] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 6.192880] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060 [ 6.192967] usb usb3: default language 0x0409 [ 6.192984] usb usb3: udev 1, busnum 3, minor = 256 [ 6.192991] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.192999] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.193028] usb usb3: Product: UHCI Host Controller [ 6.193035] usb usb3: Manufacturer: Linux 3.2.2 uhci_hcd [ 6.193041] usb usb3: SerialNumber: 0000:00:1d.1 [ 6.193216] usb usb3: usb_probe_device [ 6.193225] usb usb3: configuration #1 chosen from 1 choice [ 6.193246] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 6.193331] hub 3-0:1.0: usb_probe_interface [ 6.193339] hub 3-0:1.0: usb_probe_interface - got id [ 6.193346] hub 3-0:1.0: USB hub found [ 6.193361] hub 3-0:1.0: 2 ports detected [ 6.193368] hub 3-0:1.0: standalone hub [ 6.193374] hub 3-0:1.0: no power switching (usb 1.0) [ 6.193381] hub 3-0:1.0: individual port over-current protection [ 6.193389] hub 3-0:1.0: power on to power good time: 2ms [ 6.193404] hub 3-0:1.0: local power source is good [ 6.193412] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 6.193535] drivers/usb/core/inode.c: creating file '001' [ 6.193645] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.193662] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.193671] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.193687] drivers/usb/core/inode.c: creating file '004' [ 6.193698] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 6.193715] uhci_hcd 0000:00:1d.2: detected 2 ports [ 6.193725] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 6.193731] uhci_hcd 0000:00:1d.2: Performing full reset [ 6.193752] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 6.193788] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 [ 6.193873] usb usb4: default language 0x0409 [ 6.193890] usb usb4: udev 1, busnum 4, minor = 384 [ 6.193898] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.193906] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.193913] usb usb4: Product: UHCI Host Controller [ 6.193919] usb usb4: Manufacturer: Linux 3.2.2 uhci_hcd [ 6.193926] usb usb4: SerialNumber: 0000:00:1d.2 [ 6.194310] usb usb4: usb_probe_device [ 6.194321] usb usb4: configuration #1 chosen from 1 choice [ 6.194347] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 6.194717] hub 4-0:1.0: usb_probe_interface [ 6.194727] hub 4-0:1.0: usb_probe_interface - got id [ 6.194734] hub 4-0:1.0: USB hub found [ 6.194752] hub 4-0:1.0: 2 ports detected [ 6.194759] hub 4-0:1.0: standalone hub [ 6.194765] hub 4-0:1.0: no power switching (usb 1.0) [ 6.194771] hub 4-0:1.0: individual port over-current protection [ 6.194778] hub 4-0:1.0: power on to power good time: 2ms [ 6.194793] hub 4-0:1.0: local power source is good [ 6.194801] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 6.195166] drivers/usb/core/inode.c: creating file '001' [ 6.195297] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 6.195318] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 6.195330] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 6.195348] drivers/usb/core/inode.c: creating file '005' [ 6.195369] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 6.195388] uhci_hcd 0000:00:1d.3: detected 2 ports [ 6.195400] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 6.195407] uhci_hcd 0000:00:1d.3: Performing full reset [ 6.195430] uhci_hcd 0000:00:1d.3: supports USB remote wakeup [ 6.195476] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020 [ 6.195579] usb usb5: default language 0x0409 [ 6.195600] usb usb5: udev 1, busnum 5, minor = 512 [ 6.195609] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.195618] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.195627] usb usb5: Product: UHCI Host Controller [ 6.195634] usb usb5: Manufacturer: Linux 3.2.2 uhci_hcd [ 6.195642] usb usb5: SerialNumber: 0000:00:1d.3 [ 6.196093] usb usb5: usb_probe_device [ 6.196106] usb usb5: configuration #1 chosen from 1 choice [ 6.196134] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 6.196374] hub 5-0:1.0: usb_probe_interface [ 6.196382] hub 5-0:1.0: usb_probe_interface - got id [ 6.196389] hub 5-0:1.0: USB hub found [ 6.196403] hub 5-0:1.0: 2 ports detected [ 6.196409] hub 5-0:1.0: standalone hub [ 6.196414] hub 5-0:1.0: no power switching (usb 1.0) [ 6.196420] hub 5-0:1.0: individual port over-current protection [ 6.196428] hub 5-0:1.0: power on to power good time: 2ms [ 6.196439] hub 5-0:1.0: local power source is good [ 6.196446] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 6.196583] drivers/usb/core/inode.c: creating file '001' [ 6.247153] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 6.247167] hub 1-0:1.0: port 4: status 0501 change 0001 [ 6.291099] acer_wmi: Function bitmap for Communication Device: 0x1 [ 6.291114] acer_wmi: Brightness must be controlled by generic video driver [ 6.292082] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.295580] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 [ 6.295626] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.296070] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.347052] hub 1-0:1.0: state 7 ports 8 chg 0010 evt 0000 [ 6.347074] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 6.398275] ehci_hcd 0000:00:1d.7: port 4 high speed [ 6.398290] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 6.445877] cfg80211: Calling CRDA to update world regulatory domain [ 6.449059] usb 1-4: new high-speed USB device number 2 using ehci_hcd [ 6.500276] ehci_hcd 0000:00:1d.7: port 4 high speed [ 6.500291] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 6.597680] usb 1-4: skipped 1 descriptor after configuration [ 6.597690] usb 1-4: skipped 6 descriptors after interface [ 6.597699] usb 1-4: skipped 1 descriptor after endpoint [ 6.597706] usb 1-4: skipped 9 descriptors after interface [ 6.598282] usb 1-4: default language 0x0409 [ 6.603658] usb 1-4: udev 2, busnum 1, minor = 1 [ 6.603666] usb 1-4: New USB device found, idVendor=064e, idProduct=a102 [ 6.603674] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 6.603681] usb 1-4: Product: WebCam [ 6.603687] usb 1-4: Manufacturer: SuYin [ 6.603693] usb 1-4: SerialNumber: CN0316-S30C-OV11-VA-R03.01.00 [ 6.603884] usb 1-4: usb_probe_device [ 6.603894] usb 1-4: configuration #1 chosen from 1 choice [ 6.604173] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 6.605619] usb 1-4: adding 1-4:1.1 (config #1, interface 1) [ 6.605808] drivers/usb/core/inode.c: creating file '002' [ 6.605865] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.740356] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.740380] ath9k 0000:02:00.0: setting latency timer to 64 [ 6.985920] uvcvideo 1-4:1.0: usb_probe_interface [ 6.985932] uvcvideo 1-4:1.0: usb_probe_interface - got id [ 6.985973] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 7.002886] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input6 [ 7.003698] usbcore: registered new interface driver uvcvideo [ 7.003706] USB Video Class driver (1.1.1) [ 7.102146] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 7.204036] usb usb2: suspend_rh (auto-stop) [ 7.204072] usb usb4: suspend_rh (auto-stop) [ 7.204106] usb usb5: suspend_rh (auto-stop) [ 7.208556] ath: EEPROM regdomain: 0x65 [ 7.208562] ath: EEPROM indicates we should expect a direct regpair map [ 7.208571] ath: Country alpha2 being used: 00 [ 7.208576] ath: Regpair used: 0x65 [ 7.212157] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 7.213435] Registered led device: ath9k-phy0 [ 7.213473] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8ac0000, irq=17 [ 7.240764] usb 1-4: link qh4-0001/f5ce7a40 start 1 [1/0 us] [ 7.240883] usb 1-4: unlink qh4-0001/f5ce7a40 start 1 [1/0 us] [ 7.454055] usb usb3: suspend_rh (auto-stop) [ 8.963361] EXT3-fs (sda1): using internal journal [ 9.875627] fuse init (API version 7.17) [ 12.853834] rc used greatest stack depth: 5712 bytes left [ 15.976257] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [ 17.472207] Bluetooth: Core ver 2.16 [ 17.472269] NET: Registered protocol family 31 [ 17.472276] Bluetooth: HCI device and connection manager initialized [ 17.472284] Bluetooth: HCI socket layer initialized [ 17.472291] Bluetooth: L2CAP socket layer initialized [ 17.472307] Bluetooth: SCO socket layer initialized [ 17.732806] Bluetooth: RFCOMM TTY layer initialized [ 17.732821] Bluetooth: RFCOMM socket layer initialized [ 17.732828] Bluetooth: RFCOMM ver 1.11 [ 17.742879] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.742888] Bluetooth: BNEP filters: protocol multicast [ 19.625758] ehci_hcd 0000:00:1d.7: reused qh f5ce7a40 schedule [ 19.625773] usb 1-4: link qh4-0001/f5ce7a40 start 1 [1/0 us] [ 19.666634] usb 1-4: unlink qh4-0001/f5ce7a40 start 1 [1/0 us] [ 21.646140] sshd (2614): /proc/2614/oom_adj is deprecated, please use /proc/2614/oom_score_adj instead. [ 60.066079] wlan0: authenticate with 00:1e:e5:8c:c9:2a (try 1) [ 60.071057] wlan0: authenticated [ 60.071191] wlan0: associate with 00:1e:e5:8c:c9:2a (try 1) [ 60.073904] wlan0: RX AssocResp from 00:1e:e5:8c:c9:2a (capab=0x411 status=0 aid=2) [ 60.073921] wlan0: associated
Offline
#47 2012-02-01 23:34:19
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
[quote=NIC]
// pytanko jeszcze jak mam config'a z 3.0 i załaduje go na źródle 3.2 to w menuconfig będą dostępne moduły z 3.2 tak ?[/quote]
Tak.
Potrzebujesz tylko moduł: drivers/platform/x86/acer-wmi.c więc spokojnie możesz go ukraść z kernela 3.2 i powinno się kompilować.
Dla pewności w kodzie znajdź sobie tekst "Acer Laptop ACPI-WMI Extras" i doklej doń swój pseudonim, będzie wiadomo czy się faktycznie skompilował i załadował.[/quote]
Pierwsze ogarniam muszę podmienić drivers/platform/x86/acer-wmi.c z 3.2.2 do 3.0.18 , ale czy mógłbyś objaśnić bardziej to dodanie pseudonimu ?
Offline
#48 2012-02-01 23:51:26
NIC - Członek DUG
Re: Kompilacja karty graficznej na sztywno
1. edytor tekstu z drivers/platform/x86/acer-wmi.c
2. CTRL+F "pr_info("Acer Laptop ACPI-WMI Extras\n");"
3. Dopisać pseudonim: CTRL+F "pr_info("Acer Laptop ACPI-WMI Extras (modificated by Pablik)\n");"
4. Skompilować i użyć.
Po co? By była absolutna pewność że podmieniłeś i przekompilowałeś. (bo nie ma 100% pewności że plik z 3.2 rozwiąże problem, ja daję 75%)
Stronka-dom: [url]http://titek.victorygames.pl[/url]
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak
Offline
#49 2012-02-01 23:59:42
Pablik - Użytkownik
- Pablik
- Użytkownik
- Zarejestrowany: 2010-10-21
Re: Kompilacja karty graficznej na sztywno
wystarczy podmienić tylko plik acer-wmi.c (a .ko, mod.c i mod.o) ??
i w zawartości pliku pozmieniać Acer Laptop ACPI-WMI Extras na Acer Laptop ACPI-WMI Extras(modificated by Pablik)
tak ??
Ostatnio edytowany przez Pablik (2012-02-02 00:02:18)
Offline
#50 2012-02-02 00:01:03
rychu - elektryk dyżurny
- rychu
- elektryk dyżurny
- Skąd: gdańsk
- Zarejestrowany: 2004-12-28
Re: Kompilacja karty graficznej na sztywno
Pablik ale ty masz fajne printk na początku, same zera :) dopiero od jednej tysięcznej sekundy leci poprawnie
linux regd. user #248790
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00007 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00073 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.191.154.132' WHERE u.id=1 |
| 0.00074 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.191.154.132', 1732301883) |
| 0.00041 | SELECT * FROM punbb_online WHERE logged<1732301583 |
| 0.00041 | SELECT topic_id FROM punbb_posts WHERE id=192830 |
| 0.00008 | SELECT id FROM punbb_posts WHERE topic_id=20557 ORDER BY posted |
| 0.00049 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=20557 AND t.moved_to IS NULL |
| 0.00015 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00202 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=20557 ORDER BY p.id LIMIT 25,25 |
| 0.00116 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=20557 |
| Total query time: 0.0063 s | |