Forum Debian Users Gang

Polskie forum dyskusyjne miłośników dystrybucji Debian GNU/Linux

Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: ◀ 1 … 6 7 8 9 10 11 ▶

mati75 - Psuj

mati75: Psuj; Skąd: default city; Zarejestrowany: 2010-03-14; Serwis

Re: Przyśpieszenie startu systemu

Z plymouth mam 14 sekund, bez 12, więc jest różnica.

[img]https://l0calh0st.pl/obrazki/userbar.png[/img]

Offline

Minio - Użyszkodnik

Minio: Użyszkodnik; Skąd: Brno, Česko; Zarejestrowany: 2007-12-22; Serwis

Re: Przyśpieszenie startu systemu

[b]fervi[/b]: chłopcze, pokaż mi konkretne wyniki testów porównawczych a nie artykuł z Wikipedii. Rzekomym źródłem tego stwierdzenia na Wikipedii jest [url=http://fedoraproject.org/wiki/Releases/FeatureBetterStartup]artykuł z wiki Fedory[/url], przy czym on stwierdza jedynie:

Boot up could be made faster, too, but that issue is orthogonal and should be tracked [url=http://fedoraproject.org/wiki/Features/30SecondStartup]separately[/url] .[/quote]
W sierpniu 2009 roku, kiedy artykuł na polskiej Wikipedii był pisany (data dostępu do źródła) artykuł z wiki Fedory miał taką samą postać jak obecnie.

[b]ArnVaker[/b]: używam Plymouth już od jakiegoś czasu i nie zauważyłem, żeby miał on wpływ na prędkość uruchamiania systemu. Być może faktycznie go wydłuża, ale wtedy mówimy o liczbach rzędu dziesiątych części sekundy, jeśli nie mniejszych. Jeżeli taki wpływ w ogóle jest, to jest on tak naprawdę pomijalny.

Aha — Plymouth siedzi sobie w initramfs (trzeba go zregenerować po zmianie motywu graficznego), więc jeżeli ktoś nie używa initramfs albo ma samodzielnie kompilowany kernel, to może mieć inne doświadczenia.

Ostatnio edytowany przez Minio (2011-10-27 00:49:38)

Spinnen Essen: [url=http://fluxboxpl.org/portal/]FluxboxPL[/url] [url=http://przepis-na-lo.pl/]Przepis na LibreOffice[/url]

Offline

#178 2011-10-28 16:13:33

kondziu jah - Użytkownik

kondziu jah: Użytkownik; Skąd: Zgorzelec; Zarejestrowany: 2011-05-04

Re: Przyśpieszenie startu systemu

Teraz ja.
Jeśli chcę odpalić system z bootchartem to gdm nie startuje. Było tak od zawsze, czyli od wczorajszego zainteresowania się tym wątkiem ;)

setterm -dump 1 :

Kod:

[...]
Starting deferred execution scheduler: atd/sbin/start-stop-daemon: unable to chd
ir() to (unreachable)/ (No such file or directory)
 failed!
[...]
Starting GNOME Display Manager: gdm/sbin/start-stop-daemon: unable to chdir() to
 (unreachable)/ (No such file or directory)
[...]
Starting periodic command scheduler: cron/sbin/start-stop-daemon: unable to chdi
r() to (unreachable)/ (No such file or directory)
 failed!
startpar: service(s) returned failure: gdm ... failed!

Debian GNU/Linux wheezy/sid Jahu-Software-D tty1

Jahu-Software-D login:

Nie zwracać uwagi na sida - mam z niego może ze dwa pakiety.

cat /boot/grub/grub.cfg:

Kod:

[...]
menuentry 'Debian - Linux 3.0.0-1-686-pae' --class debian --class gnu-linux --class gnu --class os {
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='(hd0,msdos3)'
    search --no-floppy --fs-uuid --set=root 233df122-a0f5-47d6-8339-bf9d177a4dd1
    echo    'Wczytywanie systemu Linux 3.0.0-1-686-pae...'
    linux    /boot/vmlinuz-3.0.0-1-686-pae root=UUID=233df122-a0f5-47d6-8339-bf9d177a4dd1 ro  quiet
    echo    'Wczytywanie początkowego dysku RAM...'
    initrd    /boot/initrd.img-3.0.0-1-686-pae
}
menuentry 'Debian - Linux 3.0.0-1-686-pae (bootchart)' --class debian --class gnu-linux --class gnu --class os {
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='(hd0,msdos3)'
    search --no-floppy --fs-uuid --set=root 233df122-a0f5-47d6-8339-bf9d177a4dd1
    echo    'Wczytywanie systemu Linux 3.0.0-1-686-pae...'
    linux    /boot/vmlinuz-3.0.0-1-686-pae root=UUID=233df122-a0f5-47d6-8339-bf9d177a4dd1 ro  quiet init=/sbin/bootchartd
    echo    'Wczytywanie początkowego dysku RAM...'
    initrd    /boot/initrd.img-3.0.0-1-686-pae
}
[...]

Wpisy różnią się tylko jedną opcją, a GDM nie startuje...

dpkg -l |grep gdm:

Kod:

dpkg -l |grep gdm
ii  gdm                                  2.20.11-4                         GNOME Display Manager

Ciekawostka: nie można zreinstalować GDM, gdyż nie można pobrać paczki - dziwne, bo GDM instalowałem z repo testinga lub DVD1 stable.

Ostatnio edytowany przez kondziu jah (2011-10-28 16:47:42)

[center][url=http://adf.ly/Y8HMh]Dropbox: 500MB gratis[/url]
[url=http://adf.ly/?id=5385762]AdFly - zarabiaj na linkach[/url]
[url=http://adf.ly/YIOh1]UIQ3 is not dead![/url]
[url=http://eu.worldofwarplanes.com][img]https://dl.dropbox.com/u/21323278/wowpalphabareng.png[/img][/url][/center]

Offline

#179 2011-10-28 16:20:09

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Przyśpieszenie startu systemu

O, też to mam. :) U mnie cron i gdm wywalają się po dodaniu bootcharta. Na BTS zgłoszenie bez odpowiedzi wisi już od dawna: [bug]614066[/bug]. Co do samego pakietu [deb]gdm[/deb], to nie ma go już w repozytoriach Sida i testinga, został zastąpiony przez [deb]gdm3[/deb].

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#180 2011-11-17 12:24:59

Tomeku - Użytkownik

Tomeku: Użytkownik; Skąd: Poznań; Zarejestrowany: 2009-06-07

Re: Przyśpieszenie startu systemu

:)

[url=http://imageshack.us/photo/my-images/33/bootchartu.png/][img]http://img33.imageshack.us/img33/1443/bootchartu.th.png[/img][/url]

Ale to na SSD.

Wiecie co dokładnie się dzieje przed uruchomieniem bootcharda i innych skrytptów? To jest czas w którym montowane są partycje i wykrywany sprzęt?

Offline

#181 2011-11-17 12:52:22

P@blo - Nadworny matematyk

P@blo: Nadworny matematyk; Skąd: Wrocław v Jasło; Zarejestrowany: 2010-11-11

Re: Przyśpieszenie startu systemu

[b]@Tomeku:[/b]
Ee... no ładnie ;)

Offline

#182 2011-11-17 13:10:10

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Przyśpieszenie startu systemu

[quote=Tomeku]Wiecie co dokładnie się dzieje przed uruchomieniem bootcharda i innych skrytptów? To jest czas w którym montowane są partycje i wykrywany sprzęt?[/quote]
Kernel (wraz z initrd jeżeli ktoś używa) się panoszy + montowanie partycji / w ro. Wywal argument „quiet” dla kernela albo przejrzyj [tt]dmesg[/tt] (od początku mniej więcej do komunikatu „Freeing unused kernel memory”), to zobaczysz dokładnie. Ach, no i 4s… Ładnie, ładnie. :)

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#183 2011-11-17 16:48:04

Tomeku - Użytkownik

Tomeku: Użytkownik; Skąd: Poznań; Zarejestrowany: 2009-06-07

Re: Przyśpieszenie startu systemu

initrd nie używam, logi z dmeseg potwiedzają moją hipotezę:

Kod:

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.0-amd64 (root@debian) (gcc version 4.6.2 (Debian 4.6.2-3) ) #1 SMP PREEMPT Mon Oct 31 02:45:27 CET 2011
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-amd64 root=/dev/sda2 ro init=/sbin/bootchartd quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000b3780000 (usable)
[    0.000000]  BIOS-e820: 00000000b3780000 - 00000000b378e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000b378e000 - 00000000b37d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b37d0000 - 00000000b37e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000b37ed000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015  08/24/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-E7FFF write-through
[    0.000000]   E8000-EBFFF write-protect
[    0.000000]   EC000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 13C000000 mask FFC000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 0B4000000 mask FFC000000 uncachable
[    0.000000]   5 base 0B8000000 mask FF8000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 5056MB, range: 64MB, type UC
[    0.000000] reg 1, base: 0GB, range: 4GB, type WB
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] reg 3, base: 3GB, range: 1GB, type UC
[    0.000000] reg 4, base: 2880MB, range: 64MB, type UC
[    0.000000] reg 5, base: 2944MB, range: 128MB, type UC
[    0.000000] total RAM covered: 3840M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 256M        num_reg: 6      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 2880MB, range: 64MB, type UC
[    0.000000] reg 3, base: 2944MB, range: 128MB, type UC
[    0.000000] reg 4, base: 4GB, range: 1GB, type WB
[    0.000000] reg 5, base: 5056MB, range: 64MB, type UC
[    0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xb3780 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009c000] 9c000 size 8192
[    0.000000] init_memory_mapping: 0000000000000000-00000000b3780000
[    0.000000]  0000000000 - 00b3600000 page 2M
[    0.000000]  00b3600000 - 00b3780000 page 4k
[    0.000000] kernel direct mapping tables up to b3780000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[    0.000000]  0100000000 - 0138000000 page 2M
[    0.000000] kernel direct mapping tables up to 138000000 @ b377a000-b3780000
[    0.000000] ACPI: RSDP 00000000000f9890 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000b3780100 00064 (v01 NEC             20100824 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000b3780290 000F4 (v04 082410 FACP1113 20100824 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000b37805e0 05E72 (v02 A146PA A146PA07 00000007 INTL 20051117)
[    0.000000] ACPI: FACS 00000000b378e000 00040
[    0.000000] ACPI: APIC 00000000b3780390 0008C (v02 082410 APIC1113 20100824 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000b3780420 0003C (v01 082410 OEMMCFG  20100824 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000b3780460 00176 (v01 NEC             20100824 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000b378e040 00072 (v01 082410 OEMB1113 20100824 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000b378a5e0 00038 (v01 082410 OEMHPET  20100824 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000b378e0c0 02024 (v01 082410 GMCHSCI  20100824 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000b3791930 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133a00000-ffff8801375fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000b3780
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 964366
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 2 pages reserved
[    0.000000]   DMA zone: 3916 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 714688 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 225792 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed20000)
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff880137c00000 s69888 r8192 d24320 u524288
[    0.000000] pcpu-alloc: s69888 r8192 d24320 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 944396
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-amd64 root=/dev/sda2 ro init=/sbin/bootchartd quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 3715092k/5111808k available (5021k kernel code, 1254344k absent, 142372k reserved, 2016k data, 452k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] NR_IRQS:384
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 3064.819 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6129.63 BogoMIPS (lpj=3064819)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000042] Mount-cache hash table entries: 256
[    0.000174] CPU: Physical Processor ID: 0
[    0.000176] CPU: Processor Core ID: 0
[    0.000179] using mwait in idle threads.
[    0.000235] Freeing SMP alternatives: 16k freed
[    0.000251] ACPI: Core revision 20110623
[    0.024578] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.034577] CPU0: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz stepping 05
[    0.136193] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.136198] ... version:                3
[    0.136199] ... bit width:              48
[    0.136200] ... generic registers:      4
[    0.136202] ... value mask:             0000ffffffffffff
[    0.136203] ... max period:             000000007fffffff
[    0.136204] ... fixed-purpose events:   3
[    0.136205] ... event mask:             000000070000000f
[    0.150197] Booting Node   0, Processors  #1
[    0.150199] smpboot cpu 1: start_ip = 9c000
[    0.260149] calibrate_delay_direct() dropping max bogoMips estimate 2 = 15017073
[    0.284152]  #2
[    0.284154] smpboot cpu 2: start_ip = 9c000
[    0.379114]  #3 Ok.
[    0.379116] smpboot cpu 3: start_ip = 9c000
[    0.470125] Brought up 4 CPUs
[    0.470128] Total of 4 processors activated (24517.95 BogoMIPS).
[    0.471548] devtmpfs: initialized
[    0.471697] NET: Registered protocol family 16
[    0.471751] kworker/u:0 used greatest stack depth: 6288 bytes left
[    0.471940] ACPI: bus type pci registered
[    0.471951] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.471953] PCI: not using MMCONFIG
[    0.471954] PCI: Using configuration type 1 for base access
[    0.472119] kworker/u:0 used greatest stack depth: 5888 bytes left
[    0.474585] bio: create slab <bio-0> at 0
[    0.474666] ACPI: Added _OSI(Module Device)
[    0.474668] ACPI: Added _OSI(Processor Device)
[    0.474669] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.474670] ACPI: Added _OSI(Processor Aggregator Device)
[    0.475328] ACPI: EC: Look up EC in DSDT
[    0.476035] ACPI: Executed 1 blocks of module-level executable AML code
[    0.477524] ACPI: SSDT 00000000b37900f0 01340 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.477702] ACPI: Dynamic OEM Table Load:
[    0.477704] ACPI: SSDT           (null) 01340 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.477758] ACPI: SSDT 00000000b3791430 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.477920] ACPI: Dynamic OEM Table Load:
[    0.477921] ACPI: SSDT           (null) 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.478036] ACPI: Interpreter enabled
[    0.478037] ACPI: (supports S0 S5)
[    0.478043] ACPI: Using IOAPIC for interrupt routing
[    0.478057] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.478667] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.507009] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.507129] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.507245] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.507246] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.507248] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.507249] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.507251] pci_root PNP0A08:00: host bridge window [mem 0xb4000000-0xdfffffff]
[    0.507252] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[    0.507261] pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
[    0.507287] pci 0000:00:01.0: [8086:0041] type 1 class 0x000604
[    0.507306] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.507308] pci 0000:00:01.0: PME# disabled
[    0.507316] pci 0000:00:02.0: [8086:0042] type 0 class 0x000300
[    0.507324] pci 0000:00:02.0: reg 10: [mem 0xfb800000-0xfbbfffff 64bit]
[    0.507329] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.507333] pci 0000:00:02.0: reg 20: [io  0xcc00-0xcc07]
[    0.507373] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.507399] pci 0000:00:16.0: reg 10: [mem 0xfbcfa000-0xfbcfa00f 64bit]
[    0.507470] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.507473] pci 0000:00:16.0: PME# disabled
[    0.507495] pci 0000:00:1a.0: [8086:3b3b] type 0 class 0x000c03
[    0.507529] pci 0000:00:1a.0: reg 20: [io  0xc880-0xc89f]
[    0.507562] pci 0000:00:1a.1: [8086:3b3e] type 0 class 0x000c03
[    0.507596] pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
[    0.507629] pci 0000:00:1a.2: [8086:3b3f] type 0 class 0x000c03
[    0.507663] pci 0000:00:1a.2: reg 20: [io  0xc480-0xc49f]
[    0.507703] pci 0000:00:1a.7: [8086:3b3c] type 0 class 0x000c03
[    0.507720] pci 0000:00:1a.7: reg 10: [mem 0xfbcf8000-0xfbcf83ff]
[    0.507778] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.507781] pci 0000:00:1a.7: PME# disabled
[    0.507797] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.507838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.507841] pci 0000:00:1c.0: PME# disabled
[    0.507856] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    0.507897] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.507900] pci 0000:00:1c.1: PME# disabled
[    0.507914] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    0.507956] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.507958] pci 0000:00:1c.2: PME# disabled
[    0.507973] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[    0.508014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.508017] pci 0000:00:1c.3: PME# disabled
[    0.508034] pci 0000:00:1d.0: [8086:3b36] type 0 class 0x000c03
[    0.508071] pci 0000:00:1d.0: reg 20: [io  0xc400-0xc41f]
[    0.508104] pci 0000:00:1d.1: [8086:3b37] type 0 class 0x000c03
[    0.508139] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
[    0.508172] pci 0000:00:1d.2: [8086:3b38] type 0 class 0x000c03
[    0.508204] pci 0000:00:1d.2: reg 20: [io  0xc000-0xc01f]
[    0.508243] pci 0000:00:1d.7: [8086:3b34] type 0 class 0x000c03
[    0.508258] pci 0000:00:1d.7: reg 10: [mem 0xfbcf6000-0xfbcf63ff]
[    0.508316] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.508319] pci 0000:00:1d.7: PME# disabled
[    0.508333] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.508376] pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
[    0.508470] pci 0000:00:1f.2: [8086:3b22] type 0 class 0x000106
[    0.508484] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
[    0.508490] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
[    0.508496] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
[    0.508502] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
[    0.508508] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb41f]
[    0.508514] pci 0000:00:1f.2: reg 24: [mem 0xfbcf4000-0xfbcf47ff]
[    0.508539] pci 0000:00:1f.2: PME# supported from D3hot
[    0.508541] pci 0000:00:1f.2: PME# disabled
[    0.508553] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.508564] pci 0000:00:1f.3: reg 10: [mem 0xfbcf2000-0xfbcf20ff 64bit]
[    0.508581] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.508615] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.508663] pci 0000:02:00.0: [1814:0781] type 0 class 0x000280
[    0.508676] pci 0000:02:00.0: reg 10: [mem 0xfbdf0000-0xfbdfffff]
[    0.508755] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.508759] pci 0000:02:00.0: PME# disabled
[    0.510071] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.510078] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.510149] pci 0000:03:00.0: [197b:2360] type 0 class 0x000106
[    0.510180] pci 0000:03:00.0: reg 10: [io  0xdc00-0xdc07]
[    0.510192] pci 0000:03:00.0: reg 14: [io  0xd880-0xd883]
[    0.510203] pci 0000:03:00.0: reg 18: [io  0xd800-0xd807]
[    0.510215] pci 0000:03:00.0: reg 1c: [io  0xd480-0xd483]
[    0.510227] pci 0000:03:00.0: reg 20: [io  0xd400-0xd40f]
[    0.510238] pci 0000:03:00.0: reg 24: [mem 0xfbefa000-0xfbefbfff]
[    0.510276] pci 0000:03:00.0: PME# supported from D3hot
[    0.510280] pci 0000:03:00.0: PME# disabled
[    0.510293] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.510301] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.510304] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.510307] pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.510354] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    0.510368] pci 0000:04:00.0: reg 10: [io  0xe800-0xe8ff]
[    0.510392] pci 0000:04:00.0: reg 18: [mem 0xfafff000-0xfaffffff 64bit pref]
[    0.510408] pci 0000:04:00.0: reg 20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
[    0.510449] pci 0000:04:00.0: supports D1 D2
[    0.510451] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.510454] pci 0000:04:00.0: PME# disabled
[    0.512068] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.512074] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.512083] pci 0000:00:1c.2:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.512160] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[    0.512183] pci 0000:05:00.0: reg 10: [mem 0xfbffe000-0xfbffffff 64bit]
[    0.512276] pci 0000:05:00.0: PME# supported from D0 D3hot
[    0.512280] pci 0000:05:00.0: PME# disabled
[    0.514069] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    0.514076] pci 0000:00:1c.3:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.514150] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.514163] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.514164] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.514166] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.514167] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.514169] pci 0000:00:1e.0:   bridge window [mem 0xb4000000-0xdfffffff] (subtractive decode)
[    0.514171] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[    0.514187] pci_bus 0000:00: on NUMA node 0
[    0.514190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.514299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    0.514315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT]
[    0.514330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
[    0.514345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT]
[    0.514423]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.514524]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.520211] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.520239] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.520264] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.520290] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.520316] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.520344] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.520370] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.520397] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.520500] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.520505] vgaarb: loaded
[    0.520506] vgaarb: bridge control possible 0000:00:02.0
[    0.520585] SCSI subsystem initialized
[    0.520631] libata version 3.00 loaded.
[    0.520672] usbcore: registered new interface driver usbfs
[    0.520691] usbcore: registered new interface driver hub
[    0.520716] usbcore: registered new device driver usb
[    0.520815] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.520817] PCI: Using ACPI for IRQ routing
[    0.525708] PCI: Discovered peer bus ff
[    0.525738] pci 0000:ff:00.0: [8086:2c61] type 0 class 0x000600
[    0.525751] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    0.525765] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    0.525777] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    0.525789] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    0.525801] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    0.525964] PCI: pci_cache_line_size set to 64 bytes
[    0.526027] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.526028] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    0.526030] reserve RAM buffer: 00000000b3780000 - 00000000b3ffffff 
[    0.526193] cfg80211: Calling CRDA to update world regulatory domain
[    0.526329] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.526333] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.528348] Switching to clocksource hpet
[    0.528399] pnp: PnP ACPI init
[    0.528405] ACPI: bus type pnp registered
[    0.528462] pnp 00:00: [bus 00-ff]
[    0.528463] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.528465] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.528466] pnp 00:00: [io  0x0d00-0xffff window]
[    0.528467] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.528469] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.528470] pnp 00:00: [mem 0xb4000000-0xdfffffff window]
[    0.528471] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    0.528515] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.528522] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[    0.528523] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[    0.528524] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[    0.528526] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.528566] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.528568] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.528569] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.528571] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.528573] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.528595] pnp 00:02: [dma 4]
[    0.528597] pnp 00:02: [io  0x0000-0x000f]
[    0.528598] pnp 00:02: [io  0x0081-0x0083]
[    0.528599] pnp 00:02: [io  0x0087]
[    0.528601] pnp 00:02: [io  0x0089-0x008b]
[    0.528602] pnp 00:02: [io  0x008f]
[    0.528603] pnp 00:02: [io  0x00c0-0x00df]
[    0.528632] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.528639] pnp 00:03: [io  0x0070-0x0071]
[    0.528645] pnp 00:03: [irq 8]
[    0.528674] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.528680] pnp 00:04: [io  0x0061]
[    0.528709] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.528715] pnp 00:05: [io  0x00f0-0x00ff]
[    0.528719] pnp 00:05: [irq 13]
[    0.528747] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.528890] pnp 00:06: [io  0x03f8-0x03ff]
[    0.528894] pnp 00:06: [irq 4]
[    0.528896] pnp 00:06: [dma 0 disabled]
[    0.528952] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.529002] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.529004] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.529005] pnp 00:07: [io  0x0a10-0x0a1f]
[    0.529052] Switched to NOHz mode on CPU #0
[    0.529059] system 00:07: [io  0x0a10-0x0a1f] has been reserved
[    0.529061] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529105] Switched to NOHz mode on CPU #3
[    0.529116] Switched to NOHz mode on CPU #2
[    0.529132] pnp 00:08: [io  0x0010-0x001f]
[    0.529133] pnp 00:08: [io  0x0022-0x003f]
[    0.529134] pnp 00:08: [io  0x0044-0x005f]
[    0.529136] Switched to NOHz mode on CPU #1
[    0.529138] pnp 00:08: [io  0x0062-0x0063]
[    0.529139] pnp 00:08: [io  0x0065-0x006f]
[    0.529140] pnp 00:08: [io  0x0072-0x007f]
[    0.529141] pnp 00:08: [io  0x0080]
[    0.529142] pnp 00:08: [io  0x0084-0x0086]
[    0.529143] pnp 00:08: [io  0x0088]
[    0.529144] pnp 00:08: [io  0x008c-0x008e]
[    0.529145] pnp 00:08: [io  0x0090-0x009f]
[    0.529146] pnp 00:08: [io  0x00a2-0x00bf]
[    0.529147] pnp 00:08: [io  0x00e0-0x00ef]
[    0.529149] pnp 00:08: [io  0x04d0-0x04d1]
[    0.529150] pnp 00:08: [io  0x0800-0x087f]
[    0.529151] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.529153] pnp 00:08: [io  0x0500-0x057f]
[    0.529154] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.529155] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[    0.529156] pnp 00:08: [mem 0xfed40000-0xfed8ffff]
[    0.529213] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.529215] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.529217] system 00:08: [io  0x0500-0x057f] has been reserved
[    0.529219] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.529220] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.529222] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.529224] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529259] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    0.529295] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.529324] pnp 00:0a: [mem 0xffb00000-0xffbfffff]
[    0.529325] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[    0.529360] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[    0.529387] pnp 00:0b: [mem 0xffc00000-0xffefffff]
[    0.529440] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
[    0.529443] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529490] pnp 00:0c: [io  0x0060]
[    0.529491] pnp 00:0c: [io  0x0064]
[    0.529492] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.529493] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.529540] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.529542] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.529544] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529565] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.529611] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.529613] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529723] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.529725] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[    0.529726] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    0.529727] pnp 00:0e: [mem 0x00100000-0xb3ffffff]
[    0.529728] pnp 00:0e: [mem 0xfed90000-0xffffffff]
[    0.529783] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.529785] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.529786] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.529788] system 00:0e: [mem 0x00100000-0xb3ffffff] could not be reserved
[    0.529790] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.529792] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.529866] pnp: PnP ACPI: found 15 devices
[    0.529867] ACPI: ACPI bus type pnp unregistered
[    0.537098] PCI: max bus depth: 1 pci_try_num: 2
[    0.537134] pci 0000:00:1c.3: BAR 9: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.537137] pci 0000:00:1c.3: BAR 7: assigned [io  0x1000-0x1fff]
[    0.537139] pci 0000:00:1c.2: BAR 8: assigned [mem 0xc0200000-0xc05fffff]
[    0.537141] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.537143] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[    0.537145] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.537147] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.537151] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.537153] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.537157] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.537160] pci 0000:00:1c.0:   bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[    0.537164] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.537166] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.537169] pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.537172] pci 0000:00:1c.1:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.537176] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.537178] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.537181] pci 0000:00:1c.2:   bridge window [mem 0xc0200000-0xc05fffff]
[    0.537184] pci 0000:00:1c.2:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.537188] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    0.537190] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.537193] pci 0000:00:1c.3:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.537196] pci 0000:00:1c.3:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.537200] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.537214] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.537216] pci 0000:00:01.0: setting latency timer to 64
[    0.537219] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.537223] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.537226] pci 0000:00:1c.0: setting latency timer to 64
[    0.537230] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.537232] pci 0000:00:1c.1: setting latency timer to 64
[    0.537238] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.537240] pci 0000:00:1c.2: setting latency timer to 64
[    0.537244] pci 0000:00:1c.3: enabling device (0106 -> 0107)
[    0.537247] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.537249] pci 0000:00:1c.3: setting latency timer to 64
[    0.537253] pci 0000:00:1e.0: setting latency timer to 64
[    0.537256] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.537258] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.537259] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.537261] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.537262] pci_bus 0000:00: resource 8 [mem 0xb4000000-0xdfffffff]
[    0.537263] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.537265] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.537266] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.537268] pci_bus 0000:02: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[    0.537269] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.537270] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.537272] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.537273] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.537274] pci_bus 0000:04: resource 1 [mem 0xc0200000-0xc05fffff]
[    0.537276] pci_bus 0000:04: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.537277] pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
[    0.537279] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.537280] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.537281] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.537283] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.537284] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.537285] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[    0.537287] pci_bus 0000:06: resource 8 [mem 0xb4000000-0xdfffffff]
[    0.537288] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.537290] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    0.537291] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[    0.537317] NET: Registered protocol family 2
[    0.537353] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.537590] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.538220] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.538379] TCP: Hash tables configured (established 262144 bind 65536)
[    0.538381] TCP reno registered
[    0.538383] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.538409] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.538480] NET: Registered protocol family 1
[    0.538494] pci 0000:00:02.0: Boot video device
[    0.538660] PCI: CLS 32 bytes, default 64
[    0.538675] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.538677] Placing 64MB software IO TLB between ffff8800af77a000 - ffff8800b377a000
[    0.538678] software IO TLB at phys 0xaf77a000 - 0xb377a000
[    0.539604] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x2
[    0.539608] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x2
[    0.539613] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x2
[    0.539617] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x2
[    0.539654] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.539714] Intel AES-NI instructions are not detected.
[    0.539850] audit: initializing netlink socket (disabled)
[    0.539856] type=2000 audit(1321527522.321:1): initialized
[    0.556910] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.573570] msgmni has been set to 7256
[    0.574503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.574505] io scheduler noop registered
[    0.574549] io scheduler cfq registered (default)
[    0.574632] pcieport 0000:00:01.0: setting latency timer to 64
[    0.574652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.574730] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.574756] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.574846] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.574872] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.574961] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.574987] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.575078] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.575104] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    0.575245] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.575248] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.575258] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.575260] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.575263] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.575275] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.575276] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.575279] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.575290] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.575291] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.575294] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.575304] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.575306] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.575308] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.575486] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.575490] ACPI: Power Button [PWRB]
[    0.575534] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.575536] ACPI: Power Button [PWRF]
[    0.575568] ACPI: acpi_idle registered with cpuidle
[    0.575702] Monitor-Mwait will be used to enter C-1 state
[    0.580708] Linux agpgart interface v0.103
[    0.580754] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    0.580820] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.581626] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    0.581782] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.581822] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    0.581823] Hangcheck: Using getrawmonotonic().
[    0.581862] [drm] Initialized drm 1.1.0 20060810
[    0.581881] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.581884] i915 0000:00:02.0: setting latency timer to 64
[    0.610593] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    0.610597] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.610598] [drm] Driver supports precise vblank timestamp query.
[    0.610625] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.869889] fbcon: inteldrmfb (fb0) is primary device
[    1.034221] Console: switching to colour frame buffer device 210x65
[    1.037369] fb0: inteldrmfb frame buffer device
[    1.037370] drm: registered panic notifier
[    1.037428] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.037563] ahci 0000:00:1f.2: version 3.0
[    1.037575] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.037604] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    1.037626] ahci: SSS flag set, parallel bus scan disabled
[    1.048251] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.048257] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    1.048264] ahci 0000:00:1f.2: setting latency timer to 64
[    1.058841] scsi0 : ahci
[    1.058926] scsi1 : ahci
[    1.059000] scsi2 : ahci
[    1.059072] scsi3 : ahci
[    1.059145] scsi4 : ahci
[    1.059225] scsi5 : ahci
[    1.059286] ata1: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4100 irq 46
[    1.059288] ata2: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4180 irq 46
[    1.059290] ata3: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4200 irq 46
[    1.059292] ata4: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4280 irq 46
[    1.059293] ata5: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4300 irq 46
[    1.059295] ata6: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4380 irq 46
[    1.059311] ahci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.070234] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    1.070240] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.070247] ahci 0000:03:00.0: setting latency timer to 64
[    1.070451] scsi6 : ahci
[    1.070516] ata7: SATA max UDMA/133 abar m8192@0xfbefa000 port 0xfbefa100 irq 17
[    1.070576] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.070589] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.070606] r8169 0000:04:00.0: setting latency timer to 64
[    1.070647] r8169 0000:04:00.0: irq 47 for MSI/MSI-X
[    1.070824] r8169 0000:04:00.0: eth0: RTL8168d/8111d at 0xffffc90000062000, 00:01:2e:2f:ee:1f, XID 081000c0 IRQ 47
[    1.070868] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.070872] rt2800pci 0000:02:00.0: setting latency timer to 64
[    1.078402] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    1.078649] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.078660] ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.078670] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.078673] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.078677] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.078695] ehci_hcd 0000:00:1a.7: debug port 2
[    1.082576] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    1.082586] ehci_hcd 0000:00:1a.7: irq 16, io mem 0xfbcf8000
[    1.092214] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.092378] hub 1-0:1.0: USB hub found
[    1.092381] hub 1-0:1.0: 6 ports detected
[    1.092419] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.092428] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.092430] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.092433] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.092450] ehci_hcd 0000:00:1d.7: debug port 2
[    1.096337] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.096346] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcf6000
[    1.106208] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.106364] hub 2-0:1.0: USB hub found
[    1.106367] hub 2-0:1.0: 8 ports detected
[    1.106423] uhci_hcd: USB Universal Host Controller Interface driver
[    1.106439] uhci_hcd 0000:00:1a.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.106443] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.106445] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.106448] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.106474] uhci_hcd 0000:00:1a.0: irq 21, io base 0x0000c880
[    1.106580] hub 3-0:1.0: USB hub found
[    1.106582] hub 3-0:1.0: 2 ports detected
[    1.106609] uhci_hcd 0000:00:1a.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.106613] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.106615] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.106618] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.106643] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000c800
[    1.106743] hub 4-0:1.0: USB hub found
[    1.106745] hub 4-0:1.0: 2 ports detected
[    1.106772] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.106776] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.106778] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.106780] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.106805] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
[    1.106906] hub 5-0:1.0: USB hub found
[    1.106908] hub 5-0:1.0: 2 ports detected
[    1.106934] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.106938] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.106940] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.106942] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.106961] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000c400
[    1.107064] hub 6-0:1.0: USB hub found
[    1.107066] hub 6-0:1.0: 2 ports detected
[    1.107091] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[    1.107095] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.107097] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.107100] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.107118] uhci_hcd 0000:00:1d.1: irq 16, io base 0x0000c080
[    1.107233] hub 7-0:1.0: USB hub found
[    1.107235] hub 7-0:1.0: 2 ports detected
[    1.107262] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 18 (level, low) -> IRQ 18
[    1.107265] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.107268] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.107270] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.107289] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
[    1.107392] hub 8-0:1.0: USB hub found
[    1.107395] hub 8-0:1.0: 2 ports detected
[    1.107451] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.107461] xhci_hcd 0000:05:00.0: setting latency timer to 64
[    1.107464] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.107467] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[    1.107608] xhci_hcd 0000:05:00.0: irq 19, io mem 0xfbffe000
[    1.107656] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
[    1.107658] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[    1.107660] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[    1.107662] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
[    1.107664] xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X
[    1.107794] xHCI xhci_add_endpoint called for root hub
[    1.107796] xHCI xhci_check_bandwidth called for root hub
[    1.107830] hub 9-0:1.0: USB hub found
[    1.107836] hub 9-0:1.0: 2 ports detected
[    1.107861] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.107863] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[    1.111009] xHCI xhci_add_endpoint called for root hub
[    1.111010] xHCI xhci_check_bandwidth called for root hub
[    1.111042] hub 10-0:1.0: USB hub found
[    1.111048] hub 10-0:1.0: 2 ports detected
[    1.111128] usbcore: registered new interface driver usblp
[    1.111129] Initializing USB Mass Storage driver...
[    1.111173] usbcore: registered new interface driver usb-storage
[    1.111174] USB Mass Storage support registered.
[    1.111293] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.113859] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.113867] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.114017] mousedev: PS/2 mouse device common for all mice
[    1.114141] rtc_cmos 00:03: RTC can wake from S4
[    1.114259] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.114282] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.114308] i2c /dev entries driver
[    1.114945] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.115050] Linux video capture interface: v2.00
[    1.115217] w83627ehf: Found W83667HG-B chip at 0xa10
[    1.115570] cpuidle: using governor ladder
[    1.115572] cpuidle: using governor menu
[    1.115935] usbcore: registered new interface driver usbhid
[    1.115937] usbhid: USB HID core driver
[    1.116030] usbcore: registered new interface driver snd-usb-audio
[    1.116032] ALSA device list:
[    1.116033]   No soundcards found.
[    1.116123] IPv4 over IPv4 tunneling driver
[    1.116316] TCP vegas registered
[    1.116516] NET: Registered protocol family 10
[    1.117020] IPv6 over IPv4 tunneling driver
[    1.117319] NET: Registered protocol family 17
[    1.364116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.364443] ata1.00: ATA-9: M4-CT064M4SSD2, 0009, max UDMA/100
[    1.364452] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.364814] ata1.00: configured for UDMA/100
[    1.364906] scsi 0:0:0:0: Direct-Access     ATA      M4-CT064M4SSD2   0009 PQ: 0 ANSI: 5
[    1.365043] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.365150] sd 0:0:0:0: [sda] Write Protect is off
[    1.365152] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.365178] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.365527]  sda: sda1 sda2
[    1.365790] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.375124] ata7: SATA link down (SStatus 0 SControl 300)
[    1.394101] usb 1-6: new high speed USB device number 2 using ehci_hcd
[    1.508690] hub 1-6:1.0: USB hub found
[    1.508746] hub 1-6:1.0: 4 ports detected
[    1.541052] Refined TSC clocksource calibration: 3064.781 MHz.
[    1.541057] Switching to clocksource tsc
[    1.611023] usb 2-5: new high speed USB device number 2 using ehci_hcd
[    1.670006] ata2: SATA link down (SStatus 0 SControl 300)
[    1.675844] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[    1.677713] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[    1.679576] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[    1.681438] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[    1.683298] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[    1.683321] hub 2-0:1.0: hub_port_status failed (err = -32)
[    1.883965] hub 2-0:1.0: unable to enumerate USB device on port 5
[    1.974897] ata3: SATA link down (SStatus 0 SControl 300)
[    2.066927] usb 1-6.2: new low speed USB device number 3 using ehci_hcd
[    2.189011] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.2/1-6.2:1.0/input/input2
[    2.189103] generic-usb 0003:046E:5503.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1a.7-6.2/input0
[    2.218717] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.2/1-6.2:1.1/input/input3
[    2.218871] generic-usb 0003:046E:5503.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1a.7-6.2/input1
[    2.279789] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.285954] ata4.00: ATA-8: SAMSUNG HM641JI, 2AJ10001, max UDMA/133
[    2.285960] ata4.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.291850] usb 1-6.3: new low speed USB device number 4 using ehci_hcd
[    2.291894] ata4.00: configured for UDMA/133
[    2.291983] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HM641JI  2AJ1 PQ: 0 ANSI: 5
[    2.292093] sd 3:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    2.292128] sd 3:0:0:0: [sdb] Write Protect is off
[    2.292130] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.292153] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.394065] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.3/1-6.3:1.0/input/input4
[    2.394180] generic-usb 0003:046D:C518.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-6.3/input0
[    2.399410] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.3/1-6.3:1.1/input/input5
[    2.399533] generic-usb 0003:046D:C518.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.7-6.3/input1
[    2.596676] ata5: SATA link down (SStatus 0 SControl 300)
[    2.604669] usb 8-1: new full speed USB device number 2 using uhci_hcd
[    2.653957]  sdb: sdb1 sdb2 sdb3
[    2.654218] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.731928] usb 8-1: not running at top speed; connect to a high speed hub
[    2.901568] ata6: SATA link down (SStatus 0 SControl 300)
[    2.903531] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.903538] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    2.904575] devtmpfs: mounted

Raczej nic wielkiego z tym nie zrobi.

Szybki start systemu swoją drągą, ale np. Iceweasel podnoszączy się w 1s też cieszy ;)

Offline

#184 2011-11-17 17:05:47

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Przyśpieszenie startu systemu

[quote=Tomeku]ale np. Iceweasel podnoszączy się w 1s też cieszy ;)[/quote]
A to znowu czegoś nowego do tego używasz? Bo widzę, że e4rat nie masz w argumentach kernela…

BTW:
[quote=dariusz_][quote=ArnVaker]Może byś coś o nim naskrobał do FAQ?[/quote]
Przyłączam się do prośby.[/quote]
bump :)

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#185 2011-11-17 17:08:40

Tomeku - Użytkownik

Tomeku: Użytkownik; Skąd: Poznań; Zarejestrowany: 2009-06-07

Re: Przyśpieszenie startu systemu

Nie czytacie uważnie postów :P Dysk SSD zawitał w kompie.

Ostatnio edytowany przez Tomeku (2011-11-17 17:08:57)

Offline

#186 2011-11-17 17:12:17

P@blo - Nadworny matematyk

P@blo: Nadworny matematyk; Skąd: Wrocław v Jasło; Zarejestrowany: 2010-11-11

Re: Przyśpieszenie startu systemu

U mnie ciągle jest problem z prędkością łączenia się z siecią (nm). Łączy się z...4s.

Widzę, że (tak mi się wydaje) nie używasz e4rat'a. Może spróbuj... "Ciekawe czy wybuchnie :D". Dodać zawsze warto ;)

Ostatnio edytowany przez P@blo (2011-11-17 17:19:16)

Offline

#187 2011-11-17 17:26:54

Tomeku - Użytkownik

Tomeku: Użytkownik; Skąd: Poznań; Zarejestrowany: 2009-06-07

Re: Przyśpieszenie startu systemu

Nie ma sensu. Z całego dysku SSD jest taki sam odczyt i czas dostępu. Same skrypty startowe itp. uruchamiają się w 1.5 sekundy, większość czasu zajmuje wykrywanie sprzętów itp. W sumie nie ma co przesadzać :P

Offline

#188 2011-11-27 14:39:46

fervi - Użytkownik

fervi: Użytkownik; Zarejestrowany: 2010-03-14

Re: Przyśpieszenie startu systemu

http://osworld.pl/2008/07/06/drastyczne-przyspieszenie-linuksa-dzieki-preload-oraz-prelink/

Nie wiem czy było wspominane

Fervi

Offline

#189 2012-01-15 03:09:25

Tomeku - Użytkownik

Tomeku: Użytkownik; Skąd: Poznań; Zarejestrowany: 2009-06-07

Re: Przyśpieszenie startu systemu

Lepsza karta, niż zintegrowana w procesorze i start szybszy ;)

[url=http://imageshack.us/photo/my-images/214/bootchartv.png/][img]http://img214.imageshack.us/img214/7127/bootchartv.th.png[/img][/url]

Ostatnio edytowany przez Tomeku (2012-03-19 22:09:08)

Offline

#190 2012-04-07 14:06:11

Minio - Użyszkodnik

Minio: Użyszkodnik; Skąd: Brno, Česko; Zarejestrowany: 2007-12-22; Serwis

Re: Przyśpieszenie startu systemu

Nie ma osobnego wątku poświęconego e4rat, więc napiszę tutaj.

1. Informacja: trzeciego kwietnia opublikowana została wersja 0.2.2. Sprawdzał już ktoś, jak działa na Debianie?

2. Pytanie: czy e4rat będzie działał z zaszyfrowanym dyskiem/partycją?

Spinnen Essen: [url=http://fluxboxpl.org/portal/]FluxboxPL[/url] [url=http://przepis-na-lo.pl/]Przepis na LibreOffice[/url]

Offline

#191 2012-04-07 15:33:11

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Przyśpieszenie startu systemu

[quote=Minio]1. Informacja: trzeciego kwietnia opublikowana została wersja 0.2.2. Sprawdzał już ktoś, jak działa na Debianie?[/quote]
U mnie działa tak samo. Chciałem zajrzeć w changeloga, ale coś nie mogę go znaleźć…

[quote=Minio]2. Pytanie: czy e4rat będzie działał z zaszyfrowanym dyskiem/partycją?[/quote]
Osobiście nie używam szyfrowania, ale gdzieś kiedyś widziałem, że tak.

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#192 2012-12-27 09:19:13

macios4x - Użytkownik

macios4x: Użytkownik; Zarejestrowany: 2012-12-10

Re: Przyśpieszenie startu systemu

Chcę przyśpieszyć nieco Debaina i powyłączać to co zbędne. Przeglądam wynik [b]Bootchart[/b] i usługi/skrypty w [b]sysv-rc-conf[/b]. Nie jestem aż tak obeznany w tej kwestii zatem proszę o jakieś sugestie czy można wyłączyć następujące rzeczy i czy nie będzie to miało negatywny wpływ na stabilność i działanie systemu:

usługi/skrypty w sysv-rc-conf:

- acct
- acpid
- atd
- dbus
- early-rea$
- keyboard-setup
- kmod
- later-rea$
- motd
- procps
- rmnologin
- rpcbind
- single
- stop-read$
- udev
- udev-mtab
- urandom[/quote]
niektóre elementy wyniku Bootchart:
- setupcon
- checkroot.sh
- modprobe
- blkid
- ifup
- sleep
- dhclient
- kworker (1:1, 1:2, 1:3, 0:3 - cokolwiek to oznacza...)
- ext4-dio-unwrit
- pksmoused
- khubd[/quote]
Dodam że komputer (stacjonarny) mam przeciętny (procesor Pentium D, klawiatura USB, mysz PS2, monitor VGA) jeśli w.w usługi mają znaczenie przy konfiguracji sprzętu. Zatem proszę o jakieś sugestie co Waszym zdaniem można powyłączać?

Zwolennik Open Source, użytkownik Arch, Debian

Offline

#193 2012-12-27 10:05:28

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Przyśpieszenie startu systemu

Tak właściwie to skąd mamy wiedzieć co akurat Tobie jest potrzebne? :) Prawdopodobnie acct, atd i rpcbind możesz wywalić, ale to raczej i tak nic nie da. Zainteresuj się może odchudzeniem initrd lub jeśli nie masz nic lepszego do roboty kompilacją statycznego kernela, oraz e4rat zamiast readahead jeśli masz system na ext4.

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#194 2012-12-27 10:35:52

macios4x - Użytkownik

macios4x: Użytkownik; Zarejestrowany: 2012-12-10

Re: Przyśpieszenie startu systemu

Chodzi o to tylko by w miarę możliwości napisać które z tych programów można powyłączać mając na uwadze aby system działał (internet, dźwięk, wideo itp), jeśli to możliwe to do czego one służą tak ogółem.

[quote=ArnVaker]Zainteresuj się może odchudzeniem initrd lub jeśli nie masz nic lepszego do roboty kompilacją statycznego kernela, oraz e4rat zamiast readahead jeśli masz system na ext4.[/quote]
W jaki sposób odchudzić initrd?
Na kompilację kernela przyjdzie czas. Kernel liquorice uruchamia się praktycznie tak samo jak standardowy. Mam właśnie ext4, zatem czemu lepiej e4rat zamiast readahead? Czy można jednocześnie użyć jedno i drugie?

Zwolennik Open Source, użytkownik Arch, Debian

Offline

#195 2012-12-27 10:52:49

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Przyśpieszenie startu systemu

Te programy to są skrypty w /etc/init.d, w każdym jest z grubsza napisane do czego służy. Poza tymi co wcześniej wymieniłem raczej nic bym nie wyłączał (no readahead gdybyś go nie używał ;)).

Odnośnie initrd: w /etc/initramfs-tools/initramfs.conf zmieniasz:

Kod:

MODULES=most

na:

Kod:

MODULES=dep

i generujesz nowe initrd:

Kod:

update-initramfs -u -k `uname -r`

Powinno być kilka razy mniejsze.

Odnośnie e4rat: u mnie (i nie tylko u mnie, aczkolwiek też nie u wszystkich) po prostu działa o wiele lepiej niż readahead. Kiedyś używałem readahead, potem zmieniłem na e4rat i używam od tamtej pory. W sumie nie wiem czy można używać ich jednocześnie, nigdy nie próbowałem. A ext4, ponieważ e4rat – w przeciwieństwie do readahead – jest narzędziem tylko dla tego systemu plików.

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#196 2012-12-27 11:21:20

macios4x - Użytkownik

macios4x: Użytkownik; Zarejestrowany: 2012-12-10

Re: Przyśpieszenie startu systemu

Co jest lepsze podczas instalacji w trybie ekspert, czy zainstalować system "generic" lub "targeted"?. Jeśli dobrze rozumiem to generic instaluje pełny kernel wraz ze wszystkimi sterownikami (nawet te niepotrzebne) a targeted tylko te wymagane przez sprzęt (więc prawdopodobne że na innym sprzęcie może sie nie uduchomić)?

E4rat można zrobić wedle tego artykułu czy jakoś inaczej lepiej?:
http://www.fell.it/2012/04/07/speed-up-debian/

Edytując plik [b]/etc/sysctl.conf[/b] można wpisać taką wartość:

Kod:

vm.vfs_cache_pressure=50

Co to oznacza i jaką ma funkcję?

Ostatnio edytowany przez macios4x (2012-12-27 11:33:17)

Zwolennik Open Source, użytkownik Arch, Debian

Offline

#197 2012-12-27 11:58:13

paoolo - Oldtimer

paoolo: Oldtimer; Skąd: Kraków; Zarejestrowany: 2006-05-20

Re: Przyśpieszenie startu systemu

[OT]Przyspieszenie startu systemu? Zmień dysk na SSD. Na zasilaniu bateryjnym trochę się tnie, bo procek spowalnia - na zasilaczu - łokurde, szybciej niż POST test pamięci.[/EoOT] A co dopiero na serwerze rackowym? Tam bootstrap i POST testy wszystkich rzeczy trwają kilka razy dłużej niż uruchomienie systemu.

A co do przyspieszenia - kiedyś grzebanie w kernelu dawało widoczne zmiany. Obecnie.. nie widać tego. Nie mniej jednak, jeśli chodzi o specific-target to warto pogrzebać.

Offline

#198 2012-12-27 12:13:30

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Przyśpieszenie startu systemu

To z "generic" lub "targeted" brzmi jak to co podałem wyżej z initrd, ale pewien nie jestem czy o to chodzi.

e4rat: z grubsza tak, realloc można puścić kilka razy żeby lepiej poukładał, można też dostosować sobie ustawienia w konfigu. Ktoś chce machnąć arta na portal?

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#199 2012-12-27 12:27:09

P@blo - Nadworny matematyk

P@blo: Nadworny matematyk; Skąd: Wrocław v Jasło; Zarejestrowany: 2010-11-11

Re: Przyśpieszenie startu systemu

[quote=ArnVaker]Ktoś chce machnąć arta na portal?[/quote]
Rozumiem, że o e4rat? To ja mogę, ale to za jakiś czas.

Offline

#200 2012-12-27 12:28:30

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Przyśpieszenie startu systemu

Możesz też napisać coś na inny temat, nic nie stoi na przeszkodzie. :)

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

Strony: ◀ 1 … 6 7 8 9 10 11 ▶

Stopka forum

[ Generated in 0.034 seconds, 11 queries executed ]

Informacje debugowania

Time (s)	Query
0.00016	SET CHARSET latin2
0.00004	SET NAMES latin2
0.00114	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.128.31.76' WHERE u.id=1
0.00089	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.128.31.76', 1733012969)
0.00061	SELECT * FROM punbb_online WHERE logged<1733012669
0.00072	SELECT topic_id FROM punbb_posts WHERE id=199531
0.01792	SELECT id FROM punbb_posts WHERE topic_id=12976 ORDER BY posted
0.00080	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=12976 AND t.moved_to IS NULL
0.00007	SELECT search_for, replace_with FROM punbb_censoring
0.00431	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=12976 ORDER BY p.id LIMIT 175,25
0.00134	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=12976
Total query time: 0.028 s

Forum Debian Users Gang

Ogłoszenie

#176 2011-10-27 00:44:09

mati75 - Psuj

Re: Przyśpieszenie startu systemu

#177 2011-10-27 00:47:27

Minio - Użyszkodnik

Re: Przyśpieszenie startu systemu

#178 2011-10-28 16:13:33

kondziu jah - Użytkownik

Re: Przyśpieszenie startu systemu

Kod:

Kod:

Kod:

#179 2011-10-28 16:20:09

ArnVaker - Kapelusznik

Re: Przyśpieszenie startu systemu

#180 2011-11-17 12:24:59

Tomeku - Użytkownik

Re: Przyśpieszenie startu systemu

#181 2011-11-17 12:52:22

P@blo - Nadworny matematyk

Re: Przyśpieszenie startu systemu

#182 2011-11-17 13:10:10

ArnVaker - Kapelusznik

Re: Przyśpieszenie startu systemu

#183 2011-11-17 16:48:04

Tomeku - Użytkownik

Re: Przyśpieszenie startu systemu

Kod:

#184 2011-11-17 17:05:47

ArnVaker - Kapelusznik

Re: Przyśpieszenie startu systemu

#185 2011-11-17 17:08:40

Tomeku - Użytkownik

Re: Przyśpieszenie startu systemu

#186 2011-11-17 17:12:17

P@blo - Nadworny matematyk

Re: Przyśpieszenie startu systemu

#187 2011-11-17 17:26:54

Tomeku - Użytkownik

Re: Przyśpieszenie startu systemu

#188 2011-11-27 14:39:46

fervi - Użytkownik

Re: Przyśpieszenie startu systemu

#189 2012-01-15 03:09:25

Tomeku - Użytkownik

Re: Przyśpieszenie startu systemu

#190 2012-04-07 14:06:11

Minio - Użyszkodnik

Re: Przyśpieszenie startu systemu

#191 2012-04-07 15:33:11

ArnVaker - Kapelusznik

Re: Przyśpieszenie startu systemu

#192 2012-12-27 09:19:13

macios4x - Użytkownik

Re: Przyśpieszenie startu systemu

#193 2012-12-27 10:05:28

ArnVaker - Kapelusznik

Re: Przyśpieszenie startu systemu

#194 2012-12-27 10:35:52

macios4x - Użytkownik

Re: Przyśpieszenie startu systemu

#195 2012-12-27 10:52:49

ArnVaker - Kapelusznik

Re: Przyśpieszenie startu systemu

Kod:

Kod:

Kod:

#196 2012-12-27 11:21:20

macios4x - Użytkownik

Re: Przyśpieszenie startu systemu

Kod:

#197 2012-12-27 11:58:13

paoolo - Oldtimer

Re: Przyśpieszenie startu systemu

#198 2012-12-27 12:13:30

ArnVaker - Kapelusznik

Re: Przyśpieszenie startu systemu

#199 2012-12-27 12:27:09