Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
- Forum Debian Users Gang
- » Multimedia
- » uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
#1 2012-06-08 23:15:40
m1ke - Nowy użytkownik
- m1ke
- Nowy użytkownik
- Zarejestrowany: 2012-06-08
uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
Jako, że to jest mój pierwszy post na forum - Witam!
Przechodząc do problemu z którym się do Was zwracam - tak jak w temacie, proszę o pomoc w uruchomieniu karty dźwiękowej, która z nieznanych mi przyczyn nie chce działać. Wiem, że jest kilka postów na forum dotyczących konfiguracji karty dźwiękowej lecz żadna ze wskazówek podana w tamtych postach nie działa w moim przypadku.
Oto podstawowe dane na temat mojego Debiana i samej karty:
Kod:
uname -r 2.6.32-5-686
Kod:
lspci 00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03) 00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) 00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02) 01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Kod:
lsmod Module Size Used by i810 12428 0 i915 223022 0 drm_kms_helper 18569 1 i915 drm 112053 3 i810,i915,drm_kms_helper i2c_algo_bit 3493 1 i915 video 14605 1 i915 output 1204 1 video ppdev 4058 0 lp 5570 0 loop 9769 0 snd_intel8x0 19595 0 snd_ac97_codec 79152 1 snd_intel8x0 ac97_bus 710 1 snd_ac97_codec snd_pcm 47222 2 snd_intel8x0,snd_ac97_codec snd_seq 35463 0 snd_timer 12270 2 snd_pcm,snd_seq snd_seq_device 3673 1 snd_seq rng_core 2178 0 snd 34415 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device i2c_i801 6462 0 shpchp 21200 0 soundcore 3450 1 snd pci_hotplug 18545 1 shpchp snd_page_alloc 5045 2 snd_intel8x0,snd_pcm i2c_core 12787 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801 parport_pc 15799 1 parport 22554 3 ppdev,lp,parport_pc button 3598 1 i915 pcspkr 1207 0 evdev 5609 7 psmouse 44837 0 serio_raw 2916 0 processor 26327 1 ext3 94396 3 jbd 32401 1 ext3 mbcache 3762 1 ext3 sg 19937 0 sr_mod 10770 0 sd_mod 26013 5 cdrom 26435 1 sr_mod crc_t10dif 1012 1 sd_mod ata_generic 2247 0 uhci_hcd 16057 0 ata_piix 17736 4 ehci_hcd 28689 0 thermal 9206 0 libata 115869 2 ata_generic,ata_piix 3c59x 25036 0 usbcore 99321 3 uhci_hcd,ehci_hcd thermal_sys 9378 3 video,processor,thermal mii 2714 1 3c59x scsi_mod 105001 4 sg,sr_mod,sd_mod,libata nls_base 4541 1 usbcore
Kod:
cat /proc/asound/cards --- no soundcards ---
Jeśli potrzeba jeszcze jakiś informacji to proszę pisać.
Z góry dziękuję za pomoc.
Offline
#2 2012-06-09 01:19:31
mati75 - 
Psuj
#3 2012-06-09 07:46:11
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
Instaluj kernel z backportów.
http://dug.net.pl/tekst/194/jadro_z_backportow_w_debianie_squeeze/
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#4 2012-06-12 16:30:19
m1ke - Nowy użytkownik
- m1ke
- Nowy użytkownik
- Zarejestrowany: 2012-06-08
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
Witam,
niestety sprawa nie poszła tak gładko jak myślałem i nadal nie mam dźwięku a Debian dalej nie widzi karty dźwiękowej. Ale po kolei:
podczas instalacji jądra z backportów wg wskazówek zawartych w podlinkowanym artykule w pewnym momencie pojawił się taki tekst:
Kod:
linux-base (3) unstable; urgency=low
* Some HP Smart Array controllers are now handled by the new 'hpsa'
driver, rather than the 'cciss' driver.
While the cciss driver presented disk device names beginning with
'cciss/', hpsa makes disk arrays appear as ordinary SCSI disks and
presents device names beginning with 'sd'. In a system that already
has other SCSI or SCSI-like devices, names may change unpredictably.
During the upgrade from earlier versions, you will be prompted to
update configuration files which refer to device names that may
change. You can choose to do this yourself or to follow an automatic
upgrade process. All changed configuration files are backed up with
a suffix of '.old' (or '^old' in one case).
-- Ben Hutchings <ben@decadent.org.uk> Wed, 16 Mar 2011 13:19:34 +0000Jako, że dalej nic się nie działo zatrzymałem proces instalacji.
Szukając rozwiązania problemu natrafiłem na informację, że należy zainstalować nagłówki i obraz linuxa w odpowiedniej kolejności i będzie działać. Tak też zrobiłem (po drodze okazało się, że muszę doinstalować pakiet wireless-crda, którego nie miałem).
Po tej operacji mój kernel to:
Kod:
uname -r 2.6.38-02063808-generic
Niestety dźwięku dalej nie ma a system w dalszym ciągu nie wykrywa karty dźwiękowej.
Próba instalacji kernela poprzez:
Kod:
aptitude -t squeeze-backports install linux-image-686-pae linux-headers-686-pae
kończy się otrzymywaniem kilku informacji w stylu: "Message from syslogd..." a cały proces instalcji zatrzymuje się na 62% i wisi. W związku z powyższym w dalszym ciągu proszę o pomoc i wskazówki co mogę daej z tym zrobić.
Offline
#5 2012-06-12 16:46:19
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
A to skąd?:
Kod:
uname -r 2.6.38-02063808-generic
Mógłbyś podać te komunikaty, zamiast enigmatycznego:
kończy się otrzymywaniem kilku informacji w stylu: "Message from syslogd..." a cały proces instalcji zatrzymuje się na 62% i wisi.[/quote]
Offline
#6 2012-06-12 17:04:40
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
[b]m1ke[/b]: ten tekst co wkleiłeś to tylko informacja od dewelopera o zmianach w pakiecie. Wystarczy wcisnąć „q” potwierdzając jej przeczytanie i instalacja pójdzie dalej. Wyświetlanie tego typu komunikatów zależy od tego czy w systemie zainstalowany jest pakiet [deb]apt-listchanges[/deb]. U siebie nie miałem, dlatego też nie otrzymałem komunikatu i stąd brak wzmianki o nim. Sprawdzę to jeszcze dokładnie i dodam informację do wspomnianego poradnika, dzięki za info.
[b]EDIT:[/b] Dodałem.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#7 2012-06-13 00:00:19
mati75 - Psuj
#8 2012-06-13 00:54:13
m1ke - Nowy użytkownik
- m1ke
- Nowy użytkownik
- Zarejestrowany: 2012-06-08
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
yossarian: Tak jak pisze mati75 ten 2.6.38-02063808-generic wzięte jest z ubuntu, a konkretnie tak jak pisalem to efekt zainstalowania nagłówków i obrazu linuxa. Co do komunikatów i w ogóle tego ubuntowego kernela to jest już nieważne gdyż się już z tym uporałem i mam aktualnie kernela zainstalowanego z backportów w wersji 3.2.0-0.bpo.2-686-pae .
ArnVaker: Nie byłoby tego info gdybym nie trafił na ten problem :). Dodam tylko od siebie, że często to co dla Was, doświadczonych użytkowników, jest oczywistością często takie nie jest dla początkujących :), niemniej dziękuję za podpowiedź, będę już wiedział skąd takie informacje się biorą i co z tym robić.
Niestety pomimo tego, że zainstalowałem kernela z backportów i jest on w wersji 3.2.0-0.bpo.2-686-pae, dźwięku dalej nie ma, karta dźwiękowa w dalszym ciągu nie jest wykrywana przez co problem pozostaje otwarty...
Offline
#9 2012-06-13 01:37:18
thomsson - Dyskutant
- thomsson
- Dyskutant
- Zarejestrowany: 2011-10-26
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
http://www.unixmen.com/ac97-audio-controller/ ?
ilin napisał
[i]"DUG to tez moja mała ojczyzna"[/i]
Offline
#10 2012-06-13 07:48:02
azhag - Admin łajza
- azhag
- Admin łajza
- Skąd: Warszawa
- Zarejestrowany: 2005-11-15
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
[quote=mati75]Ze srubuntu.[/quote]
Co to jest srubuntu?
Błogosławieni, którzy czynią FAQ.
[url=http://www.opencaching.pl]opencaching[/url] :: [url=http://dug.net.pl/sources.list]debian sources.list[/url] :: [url=http://www.linuxportal.pl/blogi/azhag/wpisy]coś jakby blog[/url] :: [url=http://dug.net.pl/]polski portal debiana[/url] :: linux user #403712
Offline
#11 2012-06-13 09:09:13
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
Pokaz zawartość pliku /var/log/dmesg
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#12 2012-06-13 09:56:41
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
Miałem identyczny problem z z Debianem Squeeze i386 i kernelami z backportów, u mnie pomogło jajo z Aptosida.
Poźniej system zaktualizowalem do Wheezy i problemy z dźwiękiem zniknęły, mam nadzieję, że na stałe.
Przydałby się wynik polecenia z roota:
Kod:
lspci -k | grep -iA3 audio
oraz
Kod:
lspci -n
Pozdrawiam
;-)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#13 2012-06-13 10:20:16
m1ke - Nowy użytkownik
- m1ke
- Nowy użytkownik
- Zarejestrowany: 2012-06-08
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
Zgodnie z poleceniami:
1.
Kod:
cat /var/log/dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-0.bpo.2-686-pae (Debian 3.2.18-1~bpo60+1) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Sun Jun 3 22:21:19 UTC 2012 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000007ee0000 (usable) [ 0.000000] BIOS-e820: 0000000007f60000 - 0000000007f70000 (ACPI data) [ 0.000000] BIOS-e820: 0000000007f70000 - 0000000007f80000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000007f80000 - 0000000008000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: Hewlett-Packard e-Vectra/HP System Board, BIOS IN.02.02 02/22/2001 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7ee0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF8000000 write-back [ 0.000000] 1 base 007F80000 mask FFFF80000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000007ee0000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0007e00000 page 2M [ 0.000000] 0007e00000 - 0007ee0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ee0000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 0564c000 - 05f68000 [ 0.000000] ACPI: RSDP 000fc7f0 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 07f60000 00028 (v01 HP-BDD HPBDD-IN 0000000F MSFT 0100000C) [ 0.000000] ACPI: FACP 07f60030 00074 (v01 HP-BDD HPBDD-IN 0000000F MSFT 0100000C) [ 0.000000] ACPI: DSDT 07f600b0 0207E (v01 HP-BDD HPBDD-IN 0000000F MSFT 0100000C) [ 0.000000] ACPI: FACS 07f68000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 126MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 07ee0000 [ 0.000000] low ram: 0 - 07ee0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00007ee0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00007ee0 [ 0.000000] On node 0 totalpages: 32367 [ 0.000000] free_area_init_node: node 0, pgdat c1424000, node_mem_map c7ddf200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 222 pages used for memmap [ 0.000000] Normal zone: 28162 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 8000000 (gap: 8000000:f7f80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c7dce000 s33088 r0 d24256 u57344 [ 0.000000] pcpu-alloc: s33088 r0 d24256 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32113 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-0.bpo.2-686-pae root=UUID=196095ee-a24f-4fb4-be5d-75e952c4c153 ro quiet [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 113604k/129920k available (2926k kernel code, 15864k reserved, 1343k data, 436k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xc86e0000 - 0xff9fe000 ( 883 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc7ee0000 ( 126 MB) [ 0.000000] .init : 0xc142c000 - 0xc1499000 ( 436 kB) [ 0.000000] .data : 0xc12db9ad - 0xc142b8c0 (1343 kB) [ 0.000000] .text : 0xc1000000 - 0xc12db9ad (2926 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=c7806000 soft=c7808000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 868.582 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 1737.16 BogoMIPS (lpj=3474328) [ 0.004019] pid_max: default: 32768 minimum: 301 [ 0.004135] Security Framework initialized [ 0.004155] AppArmor: AppArmor disabled by boot time parameter [ 0.004204] Mount-cache hash table entries: 512 [ 0.004558] Initializing cgroup subsys cpuacct [ 0.004574] Initializing cgroup subsys memory [ 0.004598] Initializing cgroup subsys devices [ 0.004605] Initializing cgroup subsys freezer [ 0.004613] Initializing cgroup subsys net_cls [ 0.004620] Initializing cgroup subsys blkio [ 0.004638] Initializing cgroup subsys perf_event [ 0.004729] mce: CPU supports 5 MCE banks [ 0.004839] SMP alternatives: switching to UP code [ 0.017025] Freeing SMP alternatives: 16k freed [ 0.017053] ACPI: Core revision 20110623 [ 0.020779] ACPI: setting ELCR to 0800 (from 0628) [ 0.023144] weird, boot CPU (#0) not listed by the BIOS. [ 0.023150] SMP motherboard not detected. [ 0.023157] Local APIC not detected. Using dummy APIC emulation. [ 0.023162] SMP disabled [ 0.023169] Performance Events: [ 0.023176] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.023181] no hardware sampling interrupt available. [ 0.023189] p6 PMU driver. [ 0.023200] ... version: 0 [ 0.023206] ... bit width: 32 [ 0.023211] ... generic registers: 2 [ 0.023216] ... value mask: 00000000ffffffff [ 0.023222] ... max period: 000000007fffffff [ 0.023227] ... fixed-purpose events: 0 [ 0.023233] ... event mask: 0000000000000003 [ 0.023943] NMI watchdog disabled (cpu0): not supported (no LAPIC?) [ 0.024176] Brought up 1 CPUs [ 0.024185] Total of 1 processors activated (1737.16 BogoMIPS). [ 0.024813] devtmpfs: initialized [ 0.025322] PM: Registering ACPI NVS region at 7f70000 (65536 bytes) [ 0.025953] print_constraints: dummy: [ 0.026140] NET: Registered protocol family 16 [ 0.026456] ACPI: bus type pci registered [ 0.029334] PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1 [ 0.029341] PCI: Using configuration type 1 for base access [ 0.031459] bio: create slab <bio-0> at 0 [ 0.031722] ACPI: Added _OSI(Module Device) [ 0.031731] ACPI: Added _OSI(Processor Device) [ 0.031738] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.031746] ACPI: Added _OSI(Processor Aggregator Device) [ 0.032979] ACPI: EC: Look up EC in DSDT [ 0.037761] ACPI: Interpreter enabled [ 0.037791] ACPI: (supports S0 S1 S3 S4 S5) [ 0.037863] ACPI: Using PIC for interrupt routing [ 0.039764] ACPI: Power Resource [PSMP] (off) [ 0.040488] ACPI: Power Resource [URP1] (off) [ 0.041224] ACPI: Power Resource [LPTP] (off) [ 0.044333] ACPI: No dock devices found. [ 0.044341] HEST: Table not found. [ 0.044358] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.044954] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.045340] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.045350] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.045359] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.045368] pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored) [ 0.045377] pci_root PNP0A03:00: host bridge window [mem 0x07f80000-0xffdfffff] (ignored) [ 0.045409] pci 0000:00:00.0: [8086:7124] type 0 class 0x000600 [ 0.045499] pci 0000:00:01.0: [8086:7125] type 0 class 0x000300 [ 0.045524] pci 0000:00:01.0: reg 10: [mem 0xe8000000-0xebffffff pref] [ 0.045538] pci 0000:00:01.0: reg 14: [mem 0xeff80000-0xefffffff] [ 0.045652] pci 0000:00:1e.0: [8086:2418] type 1 class 0x000604 [ 0.045721] pci 0000:00:1f.0: [8086:2410] type 0 class 0x000601 [ 0.045832] pci 0000:00:1f.1: [8086:2411] type 0 class 0x000101 [ 0.045888] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.045948] pci 0000:00:1f.2: [8086:2412] type 0 class 0x000c03 [ 0.046006] pci 0000:00:1f.2: reg 20: [io 0xd400-0xd41f] [ 0.046060] pci 0000:00:1f.3: [8086:2413] type 0 class 0x000c05 [ 0.046117] pci 0000:00:1f.3: reg 20: [io 0x0540-0x054f] [ 0.046176] pci 0000:00:1f.5: [8086:2415] type 0 class 0x000401 [ 0.046198] pci 0000:00:1f.5: reg 10: [io 0xdc00-0xdcff] [ 0.046215] pci 0000:00:1f.5: reg 14: [io 0xd800-0xd83f] [ 0.046323] pci 0000:01:02.0: [10b7:9200] type 0 class 0x000200 [ 0.046348] pci 0000:01:02.0: reg 10: [io 0xbc00-0xbc7f] [ 0.046365] pci 0000:01:02.0: reg 14: [mem 0xefdfff80-0xefdfffff] [ 0.046414] pci 0000:01:02.0: reg 30: [mem 0xefdc0000-0xefddffff pref] [ 0.046450] pci 0000:01:02.0: supports D1 D2 [ 0.046458] pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.046470] pci 0000:01:02.0: PME# disabled [ 0.046522] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.046534] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.046544] pci 0000:00:1e.0: bridge window [mem 0xefd00000-0xefdfffff] [ 0.046556] pci 0000:00:1e.0: bridge window [mem 0xe7b00000-0xe7bfffff pref] [ 0.046566] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.046575] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.046592] pci_bus 0000:00: on NUMA node 0 [ 0.046605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.046792] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.049192] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.049354] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.049508] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.049662] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.050054] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.050071] vgaarb: loaded [ 0.050077] vgaarb: bridge control possible 0000:00:01.0 [ 0.050210] PCI: Using ACPI for IRQ routing [ 0.050223] PCI: pci_cache_line_size set to 32 bytes [ 0.050301] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.050315] reserve RAM buffer: 0000000007ee0000 - 0000000007ffffff [ 0.050709] Switching to clocksource pit [ 0.054495] pnp: PnP ACPI init [ 0.054569] ACPI: bus type pnp registered [ 0.054938] pnp 00:00: [bus 00-ff] [ 0.054950] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.054958] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.054966] pnp 00:00: [io 0x0d00-0xffff window] [ 0.054975] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.054983] pnp 00:00: [mem 0x000cb000-0x000dffff window] [ 0.054991] pnp 00:00: [mem 0x07f80000-0xffdfffff window] [ 0.055164] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.055304] pnp 00:01: [mem 0xffb80000-0xffbfffff] [ 0.055387] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.055458] pnp 00:02: [dma 4] [ 0.055466] pnp 00:02: [io 0x0000-0x000f] [ 0.055473] pnp 00:02: [io 0x0081-0x0083] [ 0.055480] pnp 00:02: [io 0x0087] [ 0.055487] pnp 00:02: [io 0x0089-0x008b] [ 0.055494] pnp 00:02: [io 0x008f] [ 0.055501] pnp 00:02: [io 0x00c0-0x00df] [ 0.055583] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.055621] pnp 00:03: [io 0x0070-0x0071] [ 0.055634] pnp 00:03: [irq 8] [ 0.055722] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.055753] pnp 00:04: [io 0x0061] [ 0.055837] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.055873] pnp 00:05: [io 0x00f0-0x00ff] [ 0.055882] pnp 00:05: [irq 13] [ 0.055969] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.056130] pnp 00:06: [irq 12] [ 0.056229] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.056266] pnp 00:07: [io 0x0060] [ 0.056273] pnp 00:07: [io 0x0064] [ 0.056281] pnp 00:07: [irq 1] [ 0.056393] pnp 00:07: Plug and Play ACPI device, IDs PNP030b PNP0303 (active) [ 0.056842] pnp 00:08: [io 0x03f8-0x03ff] [ 0.056851] pnp 00:08: [irq 4] [ 0.057074] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.057830] pnp 00:09: [io 0x0378-0x037f] [ 0.057838] pnp 00:09: [io 0x0778-0x077f] [ 0.057847] pnp 00:09: [irq 7] [ 0.057855] pnp 00:09: [dma 3] [ 0.058159] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.058511] pnp: PnP ACPI: found 10 devices [ 0.058518] ACPI: ACPI bus type pnp unregistered [ 0.058531] PnPBIOS: Disabled by ACPI PNP [ 0.099696] Switching to clocksource acpi_pm [ 0.099773] PCI: max bus depth: 1 pci_try_num: 2 [ 0.099816] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.099828] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.099843] pci 0000:00:1e.0: bridge window [mem 0xefd00000-0xefdfffff] [ 0.099854] pci 0000:00:1e.0: bridge window [mem 0xe7b00000-0xe7bfffff pref] [ 0.099891] pci 0000:00:1e.0: setting latency timer to 64 [ 0.099903] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.099911] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.099920] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.099928] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefdfffff] [ 0.099937] pci_bus 0000:01: resource 2 [mem 0xe7b00000-0xe7bfffff pref] [ 0.099945] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.099953] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff] [ 0.100144] NET: Registered protocol family 2 [ 0.100386] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101082] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.101214] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.101434] TCP: Hash tables configured (established 4096 bind 4096) [ 0.101443] TCP reno registered [ 0.101453] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.101497] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.101771] NET: Registered protocol family 1 [ 0.101830] pci 0000:00:01.0: Boot video device [ 0.102212] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 0.102221] PCI: setting IRQ 9 as level-triggered [ 0.102234] pci 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 0.102262] pci 0000:00:1f.2: PCI INT D disabled [ 0.102290] PCI: CLS 32 bytes, default 32 [ 0.102522] Unpacking initramfs... [ 0.999692] Freeing initrd memory: 9328k freed [ 1.051104] audit: initializing netlink socket (disabled) [ 1.051149] type=2000 audit(1339573812.047:1): initialized [ 1.117845] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.118255] VFS: Disk quotas dquot_6.5.2 [ 1.118360] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.118575] msgmni has been set to 240 [ 1.119090] alg: No test for stdrng (krng) [ 1.119193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.119203] io scheduler noop registered [ 1.119209] io scheduler deadline registered [ 1.119237] io scheduler cfq registered (default) [ 1.119522] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.119607] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.119615] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.120285] ERST: Table is not found! [ 1.120292] GHES: HEST is not enabled! [ 1.120335] isapnp: Scanning for PnP cards... [ 1.474297] isapnp: No Plug & Play device found [ 1.474528] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.494897] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.516069] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.516579] Linux agpgart interface v0.103 [ 1.516800] agpgart-intel 0000:00:00.0: Intel i810 Chipset [ 1.516861] agpgart-intel 0000:00:00.0: detected gtt size: 65536K total, 65536K mappable [ 1.517573] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 [ 1.518046] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.521067] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.521090] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.521504] mousedev: PS/2 mouse device common for all mice [ 1.521645] rtc_cmos 00:03: RTC can wake from S4 [ 1.521879] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.521915] rtc0: alarms up to one month, 114 bytes nvram [ 1.521952] cpuidle: using governor ladder [ 1.521960] cpuidle: using governor menu [ 1.522820] TCP cubic registered [ 1.522898] NET: Registered protocol family 10 [ 1.524773] Mobile IPv6 [ 1.524784] NET: Registered protocol family 17 [ 1.524800] Registering the dns_resolver key type [ 1.524868] Using IPI No-Shortcut mode [ 1.525208] PM: Hibernation image not present or could not be loaded. [ 1.525245] registered taskstats version 1 [ 1.525666] rtc_cmos 00:03: setting system clock to 2012-06-13 07:50:13 UTC (1339573813) [ 1.525793] Initializing network drop monitor service [ 1.526123] Freeing unused kernel memory: 436k freed [ 1.528289] Write protecting the kernel text: 2928k [ 1.528388] Write protecting the kernel read-only data: 1088k [ 1.543439] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.596494] udev[43]: starting version 164 [ 1.902994] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3 [ 1.903008] PCI: setting IRQ 3 as level-triggered [ 1.903023] 3c59x 0000:01:02.0: PCI INT A -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3 [ 1.903054] 3c59x: Donald Becker and others. [ 1.903095] 0000:01:02.0: 3Com PCI 3c905C Tornado at c86fef80. [ 1.965837] SCSI subsystem initialized [ 1.969594] usbcore: registered new interface driver usbfs [ 1.969689] usbcore: registered new interface driver hub [ 1.976557] usbcore: registered new device driver usb [ 1.978852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.010657] uhci_hcd: USB Universal Host Controller Interface driver [ 2.010835] uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 2.010866] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 2.010875] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 2.010980] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 2.011043] uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000d400 [ 2.011157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.011166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.011174] usb usb1: Product: UHCI Host Controller [ 2.011181] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.2-686-pae uhci_hcd [ 2.011188] usb usb1: SerialNumber: 0000:00:1f.2 [ 2.032152] hub 1-0:1.0: USB hub found [ 2.032171] hub 1-0:1.0: 2 ports detected [ 2.072115] libata version 3.00 loaded. [ 2.076421] ata_piix 0000:00:1f.1: version 2.13 [ 2.076595] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.078850] scsi0 : ata_piix [ 2.081999] scsi1 : ata_piix [ 2.087593] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.087604] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.112094] Refined TSC clocksource calibration: 868.636 MHz. [ 2.112115] Switching to clocksource tsc [ 2.248574] ata1.00: HPA detected: current 39851760, native 40021632 [ 2.248592] ata1.00: ATA-6: Maxtor 32049H2, YAH814Y0, max UDMA/100 [ 2.248601] ata1.00: 39851760 sectors, multi 16: LBA [ 2.252291] ata2.00: ATAPI: CD-224E, 1.7A, max UDMA/33 [ 2.264409] ata1.00: configured for UDMA/66 [ 2.264829] scsi 0:0:0:0: Direct-Access ATA Maxtor 32049H2 YAH8 PQ: 0 ANSI: 5 [ 2.268258] ata2.00: configured for UDMA/33 [ 2.270023] scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.7A PQ: 0 ANSI: 5 [ 2.305993] sd 0:0:0:0: [sda] 39851760 512-byte logical blocks: (20.4 GB/19.0 GiB) [ 2.306241] sd 0:0:0:0: [sda] Write Protect is off [ 2.306252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.306329] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.308971] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 2.308984] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.310522] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.380145] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 [ 2.382473] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.418731] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.421067] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.653509] PM: Starting manual resume from disk [ 3.653528] PM: Hibernation image partition 8:6 present [ 3.653534] PM: Looking for hibernation image. [ 3.667180] PM: Image not found (code -22) [ 3.667188] PM: Hibernation image not present or could not be loaded. [ 3.727696] kjournald starting. Commit interval 5 seconds [ 3.727770] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 5.905066] udev[213]: starting version 164 [ 6.657841] Marking TSC unstable due to TSC halts in idle [ 6.657873] ACPI: acpi_idle registered with cpuidle [ 6.663544] Switching to clocksource acpi_pm [ 6.711087] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 6.712732] ACPI: Power Button [PWRB] [ 6.713008] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6.713170] ACPI: Power Button [PWRF] [ 7.213973] parport_pc 00:09: reported by Plug and Play ACPI [ 7.214058] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 7.234562] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 7.366979] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.693452] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 8.239066] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 8.239080] PCI: setting IRQ 5 as level-triggered [ 8.239094] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 8.251144] intel_rng: FWH not detected [ 8.807640] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 8.807700] snd_intel8x0 0000:00:1f.5: setting latency timer to 64 [ 10.072047] AC'97 0 does not respond - RESET [ 10.072281] snd_intel8x0 0000:00:1f.5: PCI INT B disabled [ 10.072318] snd_intel8x0: probe of 0000:00:1f.5 failed with error -13 [ 10.958742] Adding 487420k swap on /dev/sda6. Priority:-1 extents:1 across:487420k [ 11.564814] EXT3-fs (sda7): using internal journal [ 11.812292] loop: module loaded [ 13.958219] kjournald starting. Commit interval 5 seconds [ 13.958742] EXT3-fs (sda1): using internal journal [ 13.958757] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 14.118329] kjournald starting. Commit interval 5 seconds [ 14.118703] EXT3-fs (sda5): using internal journal [ 14.118716] EXT3-fs (sda5): mounted filesystem with ordered data mode
2.
Kod:
lspci -k | grep -iA3 audio
00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)
Subsystem: Hewlett-Packard Company Device 1250
01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: Hewlett-Packard Company Device 12473.
Kod:
lspci -n 00:00.0 0600: 8086:7124 (rev 03) 00:01.0 0300: 8086:7125 (rev 03) 00:1e.0 0604: 8086:2418 (rev 02) 00:1f.0 0601: 8086:2410 (rev 02) 00:1f.1 0101: 8086:2411 (rev 02) 00:1f.2 0c03: 8086:2412 (rev 02) 00:1f.3 0c05: 8086:2413 (rev 02) 00:1f.5 0401: 8086:2415 (rev 02) 01:02.0 0200: 10b7:9200 (rev 78)
Offline
#14 2012-06-13 15:21:08
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
Karta powinna działac ale jakies tam błedy w komunikacji występują.
Spróbuj oss4
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
Strony: 1
- Forum Debian Users Gang
- » Multimedia
- » uruchomienie/konfiguracja karty dźwiękowej Intel Corporation 82801AA
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00010 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00145 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.191.208.176' WHERE u.id=1 |
| 0.00092 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.191.208.176', 1734025342) |
| 0.00037 | SELECT * FROM punbb_online WHERE logged<1734025042 |
| 0.00189 | DELETE FROM punbb_online WHERE ident='3.147.104.108' |
| 0.00093 | SELECT topic_id FROM punbb_posts WHERE id=203737 |
| 0.00205 | SELECT id FROM punbb_posts WHERE topic_id=21397 ORDER BY posted |
| 0.00109 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=21397 AND t.moved_to IS NULL |
| 0.00007 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00275 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=21397 ORDER BY p.id LIMIT 0,25 |
| 0.00105 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=21397 |
| Total query time: 0.01271 s | |