Forum Debian Users Gang

dmesg

dmesg | grep ath9k

aptitude install hostapd isc-dhcp-server

touch /etc/init.d/firewall

touch /etc/hostapd/hostapd.conf

chmod +x /etc/init.d/firewall

nano /etc/init.d/firewall

 ### BEGIN INIT INFO
# Provides:          firewall
# Required-Start:    $syslog $network
# Required-Stop:     $syslog $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: firewall
# Description:       firewall
### END INIT INFO

echo 1 > /proc/sys/net/ipv4/ip_forward


iptables -F
iptables -X
iptables -t nat -X
iptables -t nat -F
iptables -t mangle -F
iptables -t mangle -X


iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT


iptables -A INPUT -j ACCEPT -m state --state ESTABLISHED,RELATED
iptables -A FORWARD -j ACCEPT -m state --state ESTABLISHED,RELATED
iptables -A OUTPUT -j ACCEPT -m state --state ESTABLISHED,RELATED


iptables -t nat -A POSTROUTING -s 100.1.1.0/24 -j MASQUERADE
iptables -A FORWARD -s 100.1.1.0/24 -j ACCEPT


iptables -t nat -A POSTROUTING -s 125.1.1.0/24 -j MASQUERADE
iptables -A FORWARD -s 125.1.1.0/24 -j ACCEPT

update-rc.d firewall defaults 20

auto lo
iface lo inet loopback


allow-hotplug eth0
iface eth0 inet dhcp

auto eth1
iface eth1 inet static
        address 100.1.1.1
        netmask 255.255.255.0



auto wlan0
iface wlan0 inet static
        address 125.1.1.1
        netmask 255.255.255.0

ddns-update-style none;
default-lease-time 600;
max-lease-time 4200;
authoritative;

subnet 100.1.1.0 netmask 255.255.255.0 {
  option domain-name-servers 213.241.79.38, 213.241.79.37, 83.238.255.76;
  range 100.1.1.100 100.1.1.120;
  option routers 100.1.1.1;
  option subnet-mask 255.255.255.0;
  option broadcast-address 100.1.1.255;
}



subnet 125.1.1.0 netmask 255.255.255.0 {
  range 125.1.1.100 125.1.1.120;
  option domain-name-servers 213.241.79.38, 213.241.79.37, 83.238.255.76;
  option routers 125.1.1.1;
  option subnet-mask 255.255.255.0;
  option broadcast-address 125.1.1.255;
}

INTERFACES=""

INTERFACES="eth1 wlan0"

nano /etc/hostapd/hostapd.conf

interface=wlan0

driver=nl80211

logger_syslog=-1

logger_syslog_level=2

logger_stdout=--1

logger_stdout_level=2

debug=0

dump_file=/tmp/hostapd.dump

ctrl_interface=/var/run/hostapd

ctrl_interface_group=0

hw_mode=g

channel=5

wpa=2

wpa_key_mgmt=WPA-PSK

rsn_pairwise=CCMP

ieee80211n=1

wmm_enabled=1

ht_capab=[HT40-][SHORT-GI-40][DSSS_CCK-40]

ssid=xxx

wpa_passphrase=xxx

nano /etc/init.d/hostapd

DAEMON_CONF=



DAEMON_CONF=/etc/hostapd/hostapd.conf

/etc/network/interfaces

/etc/resolv.conf

/etc/hostapd/hostapd.conf

/etc/init.d/hostapd

/etc/default/isc-dhcp-server

/etc/dhcp/dhcpd.conf

ifconfig

/etc/init.d/firewall

# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
auto lo eth0 wlan0 eth0:1
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

allow-hotplug eth0:1
iface eth0:1 inet static
    address 192.168.168.168
    netmask 255.255.255.0

auto br0
#allow-hotplug wlan0
iface br0 inet static
        bridge_ports eth0 wlan0
        address 192.168.2.1
        network 192.168.2.0
        gateway 192.168.2.254
        netmask 255.255.255.0
        broadcast 192.168.2.255
        up /sbin/ifconfig br0 up
        post-up /bin/sleep 10 ; /usr/local/bin/hostapd -B /etc/hostapd.conf
        pre-down /usr/bin/killall hostapd
        down /sbin/ifconfig br0 down

# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.1.1
search lan

interface=wlan0

driver=nl80211

logger_syslog=-1

logger_syslog_level=2

logger_stdout=--1

logger_stdout_level=2

debug=0

dump_file=/tmp/hostapd.dump

ctrl_interface=/var/run/hostapd

ctrl_interface_group=0

hw_mode=g

channel=9

wpa=2

wpa_key_mgmt=WPA-PSK

rsn_pairwise=CCMP

ieee80211n=1

wmm_enabled=1

ht_capab=[HT40-][SHORT-GI-40][DSSS_CCK-40]

ssid=iConnectWiFi

wpa_passphrase=xxx

#!/bin/sh

### BEGIN INIT INFO
# Provides:        hostapd
# Required-Start:    $remote_fs
# Required-Stop:    $remote_fs
# Should-Start:        $network
# Should-Stop:
# Default-Start:    2 3 4 5
# Default-Stop:        0 1 6
# Short-Description:    Advanced IEEE 802.11 management daemon
# Description:        Userspace IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP
#            Authenticator
### END INIT INFO

PATH=/sbin:/bin:/usr/sbin:/usr/bin
DAEMON_SBIN=/usr/sbin/hostapd
DAEMON_DEFS=/etc/default/hostapd
DAEMON_CONF=/etc/hostapd/hostapd.conf
NAME=hostapd
DESC="advanced IEEE 802.11 management"
PIDFILE=/var/run/hostapd.pid

[ -x "$DAEMON_SBIN" ] || exit 0
[ -s "$DAEMON_DEFS" ] && . /etc/default/hostapd
[ -n "$DAEMON_CONF" ] || exit 0

DAEMON_OPTS="-B -P $PIDFILE $DAEMON_OPTS $DAEMON_CONF"

. /lib/lsb/init-functions

case "$1" in
  start)
    log_daemon_msg "Starting $DESC" "$NAME"
    start-stop-daemon --start --oknodo --quiet --exec "$DAEMON_SBIN" \
        --pidfile "$PIDFILE" -- $DAEMON_OPTS >/dev/null
    log_end_msg "$?"
    ;;
  stop)
    log_daemon_msg "Stopping $DESC" "$NAME"
    start-stop-daemon --stop --oknodo --quiet --exec "$DAEMON_SBIN" \
        --pidfile "$PIDFILE"
    log_end_msg "$?"
    ;;
  reload)
      log_daemon_msg "Reloading $DESC" "$NAME"
    start-stop-daemon --stop --signal HUP --exec "$DAEMON_SBIN" \
        --pidfile "$PIDFILE"
    log_end_msg "$?"
    ;;
  restart|force-reload)
      $0 stop
    sleep 8
    $0 start
    ;;
  status)
    status_of_proc "$DAEMON_SBIN" "$NAME"
    exit $?
    ;;
  *)
    N=/etc/init.d/$NAME
    echo "Usage: $N {start|stop|restart|force-reload|reload|status}" >&2
    exit 1
    ;;
esac

exit 0

# Defaults for dhcp initscript
# sourced by /etc/init.d/dhcp
# installed at /etc/default/isc-dhcp-server by the maintainer scripts

#
# This is a POSIX shell fragment
#

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
#    Separate multiple interfaces with spaces, e.g. "eth0 eth1".
INTERFACES="eth0 wlan0"

# Configuration file for /sbin/dhclient, which is included in Debian's
#    dhcp3-client package.
#
# This is a sample configuration file for dhclient. See dhclient.conf's
#    man page for more information about the syntax of this file
#    and a more comprehensive list of the parameters understood by
#    dhclient.
#
# Normally, if the DHCP server provides reasonable information and does
#    not leave anything out (like the domain name, for example), then
#    few changes must be made to this file, if any.
#

option rfc3442-classless-static-routes code 121 = array of unsigned integer 8;

#send host-name "andare.fugue.com";
send host-name = gethostname();
#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
#send dhcp-lease-time 3600;
#supersede domain-name "fugue.com home.vix.com";
#prepend domain-name-servers 127.0.0.1;
request subnet-mask, broadcast-address, time-offset, routers,
    domain-name, domain-name-servers, domain-search, host-name,
    netbios-name-servers, netbios-scope, interface-mtu,
    rfc3442-classless-static-routes, ntp-servers;
#require subnet-mask, domain-name-servers;
#timeout 60;
#retry 60;
#reboot 10;
#select-timeout 5;
#initial-interval 2;
#script "/etc/dhcp3/dhclient-script";
#media "-link0 -link1 -link2", "link0 link1";
#reject 192.33.137.209;

#alias {
#  interface "eth0";
#  fixed-address 192.5.5.213;
#  option subnet-mask 255.255.255.255;
#}

#lease {
#  interface "eth0";
#  fixed-address 192.33.137.200;
#  medium "link0 link1";
#  option host-name "andare.swiftmedia.com";
#  option subnet-mask 255.255.255.0;
#  option broadcast-address 192.33.137.255;
#  option routers 192.33.137.250;
#  option domain-name-servers 127.0.0.1;
#  renew 2 2000/1/12 00:00:01;
#  rebind 2 2000/1/12 00:00:01;
#  expire 2 2000/1/12 00:00:01;
#}

root@iconnect:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:d0:b8:0c:d2:d2  
          inet addr:192.168.1.106  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::2d0:b8ff:fe0c:d2d2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3621 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2497 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:374935 (366.1 KiB)  TX bytes:951408 (929.1 KiB)
          Interrupt:11 

eth0:1    Link encap:Ethernet  HWaddr 00:d0:b8:0c:d2:d2  
          inet addr:192.168.168.168  Bcast:192.168.168.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:11 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:109 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:12688 (12.3 KiB)  TX bytes:12688 (12.3 KiB)

mon.wlan0 Link encap:UNSPEC  HWaddr B4-82-FE-5E-59-8A-80-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:130 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:15665 (15.2 KiB)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr b4:82:fe:5e:59:8a  
          inet6 addr: fe80::b682:feff:fe5e:598a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:41 errors:0 dropped:1 overruns:0 frame:0
          TX packets:55 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:9652 (9.4 KiB)  TX bytes:13942 (13.6 KiB)

root@iconnect:~# dmesg | grep ath9k
[   31.078614] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   31.081363] Registered led device: ath9k-phy0