Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
W nawiązaniu do topika: http://forum.dug.net.pl/viewtopic.php?pid=211386#p211386 na który nikt mi nie odpowiedział poczyniłem ciekawego odkrycia. Mianowicie postanowiłem samodzielnie skompilować Lirca myśląc, że może paczka z repo robi mi takie jaja, dlatego odinstalowałem z systemu wszystko co jest z Lircem związane, usunąłem cały katalog Lirc z /etc i skompilowałem źródła Lirca. Jakież było moje zdziwienie, gdy okazało się, że mogę dalej sterować kompa pilotem, ale tylko te klawisze co poprzednio: ( 0,1,2,3,4,5,6,7,8,9. ok, prawo, lewo, góra, dół, mute volume up volume down, list, rec, play/pause, oraz szybkie przewijanie w przód i tył) Szkopuł jednak w tym, że Lirc nie jest w ogóle skonfigurowany BO NIE MA W OGÓLE KATALOGU /etc/lirc i jego zawartości. Dlatego okazuje się, że mogłem sobie poprzednio na rózne sposoby konfigurować pliki hardware. conf i lirc. conf i nic to nie działało bo u mnie na kompie konfiguracja Lirca musi w takim razie siedzieć gdzie indziej, tylko w takim razie gdzie? Czy ktoś mi to pomoże zrozumieć? O co tu chodzi? Jak to jest możliwe? Gdzie mogę mieć zapisaną konfigurację Lirca skoro po jego zainstalowaniu bez jakiejkolwiek konfiguracji komp wykrywa i reaguje na wyżej wymienione przyciski?
Offline
Piloty są z reguły wykrywane jako klawiatury, więc część klawiszy działa bez dodatkowych kombinacji. Można to potwierdzić uruchamiając program xev i wciskając przyciski na pilocie. Co do lirca - nie pomogę.
Offline
no faktycznie xev reaguje na przyciski pilota bez nawet instalacji lirca, to chyba sprawka pakietu kremotecontrol, może jego by skonfigurować, tylko, że nie wiem gdzie on ma plik konfiguracyjny.
Offline
To zachowanie bardziej niskopoziomowe. Przyciski można zmapować jako klawisze np. za pomocą xmodmap, tyle że prawdopodobnie nie wszystkie będą miały swój sensowny odpowiednik w dostępnych klawiszach multimedialnych (/usr/include/X11/XF86keysym.h).
Offline
Chyba błędny trop, u mnie w tym pliku mam raczej coś o językach:
/*********************************************************** Copyright 1987, 1998 The Open Group Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of The Open Group shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from The Open Group. Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. All Rights Reserved Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Digital not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ******************************************************************/ /* default keysyms */ #define XK_MISCELLANY #define XK_XKB_KEYS #define XK_LATIN1 #define XK_LATIN2 #define XK_LATIN3 #define XK_LATIN4 #define XK_LATIN8 #define XK_LATIN9 #define XK_CAUCASUS #define XK_GREEK #define XK_KATAKANA #define XK_ARABIC #define XK_CYRILLIC #define XK_HEBREW #define XK_THAI #define XK_KOREAN #define XK_ARMENIAN #define XK_GEORGIAN #define XK_VIETNAMESE #define XK_CURRENCY #define XK_MATHEMATICAL #define XK_BRAILLE #define XK_SINHALA #include <X11/keysymdef.h>
Nadmienię jeszcze że mój system to kubuntu 12.04, czyli taki nie do końca debian :)
Offline
W Debianie jest to [url=http://cgit.freedesktop.org/xorg/proto/x11proto/tree/XF86keysym.h]ten[/url] plik, jednak nie wiem, czy nie lepiej by było popracować nad lircem, choć tu będzie musiał pomóc ktoś inny.
Offline
Jakieś pomysły gdzie może być ten plik w Kubuntu? Wolę tutaj skonfigurować pilota bo jest to prostsze, nie trzeba się bawić w konfigurację Lirca, wystarczy tylko ustawić skróty klawiaturowe dla każdej aplikacji i spokój, przy zmianie skrótu klawiaturowego system przechwytuje klawisze z pilota bez problemu i nie trzeba tworzyć osobnej konfiguracji z osobna dla lirca w .lirccd
Offline
Dobra przepraszam, mój błąd siedziałem aż do teraz aż go wypatrzyłem i okazało się, że mam ten plik w /usr/include/X11/
Wygląda on u mnie tak:
/* * XFree86 vendor specific keysyms. * * The XFree86 keysym range is 0x10080001 - 0x1008FFFF. * * When adding new entries, the xc/lib/XKeysymDB file should also be * updated to make the new entries visible to Xlib. */ /* * ModeLock * * This one is old, and not really used any more since XKB offers this * functionality. */ #define XF86XK_ModeLock 0x1008FF01 /* Mode Switch Lock */ /* * Note, 0x1008FF07 - 0x1008FF0F are free and should be used for misc new * keysyms that don't fit into any of the groups below. * * 0x1008FF64, 0x1008FF6F, 0x1008FF71, 0x1008FF83 are no longer used, * and should be used first for new keysyms. * * Check in keysymdef.h for generic symbols before adding new XFree86-specific * symbols here. * * X.Org will not be adding to the XF86 set of keysyms, though they have * been adopted and are considered a "standard" part of X keysym definitions. * XFree86 never properly commented these keysyms, so we have done our * best to explain the semantic meaning of these keys. * * XFree86 has removed their mail archives of the period, that might have * shed more light on some of these definitions. Until/unless we resurrect * these archives, these are from memory and usage. */ /* Backlight controls. */ #define XF86XK_MonBrightnessUp 0x1008FF02 /* Monitor/panel brightness */ #define XF86XK_MonBrightnessDown 0x1008FF03 /* Monitor/panel brightness */ #define XF86XK_KbdLightOnOff 0x1008FF04 /* Keyboards may be lit */ #define XF86XK_KbdBrightnessUp 0x1008FF05 /* Keyboards may be lit */ #define XF86XK_KbdBrightnessDown 0x1008FF06 /* Keyboards may be lit */ /* * Keys found on some "Internet" keyboards. */ #define XF86XK_Standby 0x1008FF10 /* System into standby mode */ #define XF86XK_AudioLowerVolume 0x1008FF11 /* Volume control down */ #define XF86XK_AudioMute 0x1008FF12 /* Mute sound from the system */ #define XF86XK_AudioRaiseVolume 0x1008FF13 /* Volume control up */ #define XF86XK_AudioPlay 0x1008FF14 /* Start playing of audio > */ #define XF86XK_AudioStop 0x1008FF15 /* Stop playing audio */ #define XF86XK_AudioPrev 0x1008FF16 /* Previous track */ #define XF86XK_AudioNext 0x1008FF17 /* Next track */ #define XF86XK_HomePage 0x1008FF18 /* Display user's home page */ #define XF86XK_Mail 0x1008FF19 /* Invoke user's mail program */ #define XF86XK_Start 0x1008FF1A /* Start application */ #define XF86XK_Search 0x1008FF1B /* Search */ #define XF86XK_AudioRecord 0x1008FF1C /* Record audio application */ /* These are sometimes found on PDA's (e.g. Palm, PocketPC or elsewhere) */ #define XF86XK_Calculator 0x1008FF1D /* Invoke calculator program */ #define XF86XK_Memo 0x1008FF1E /* Invoke Memo taking program */ #define XF86XK_ToDoList 0x1008FF1F /* Invoke To Do List program */ #define XF86XK_Calendar 0x1008FF20 /* Invoke Calendar program */ #define XF86XK_PowerDown 0x1008FF21 /* Deep sleep the system */ #define XF86XK_ContrastAdjust 0x1008FF22 /* Adjust screen contrast */ #define XF86XK_RockerUp 0x1008FF23 /* Rocker switches exist up */ #define XF86XK_RockerDown 0x1008FF24 /* and down */ #define XF86XK_RockerEnter 0x1008FF25 /* and let you press them */ /* Some more "Internet" keyboard symbols */ #define XF86XK_Back 0x1008FF26 /* Like back on a browser */ #define XF86XK_Forward 0x1008FF27 /* Like forward on a browser */ #define XF86XK_Stop 0x1008FF28 /* Stop current operation */ #define XF86XK_Refresh 0x1008FF29 /* Refresh the page */ #define XF86XK_PowerOff 0x1008FF2A /* Power off system entirely */ #define XF86XK_WakeUp 0x1008FF2B /* Wake up system from sleep */ #define XF86XK_Eject 0x1008FF2C /* Eject device (e.g. DVD) */ #define XF86XK_ScreenSaver 0x1008FF2D /* Invoke screensaver */ #define XF86XK_WWW 0x1008FF2E /* Invoke web browser */ #define XF86XK_Sleep 0x1008FF2F /* Put system to sleep */ #define XF86XK_Favorites 0x1008FF30 /* Show favorite locations */ #define XF86XK_AudioPause 0x1008FF31 /* Pause audio playing */ #define XF86XK_AudioMedia 0x1008FF32 /* Launch media collection app */ #define XF86XK_MyComputer 0x1008FF33 /* Display "My Computer" window */ #define XF86XK_VendorHome 0x1008FF34 /* Display vendor home web site */ #define XF86XK_LightBulb 0x1008FF35 /* Light bulb keys exist */ #define XF86XK_Shop 0x1008FF36 /* Display shopping web site */ #define XF86XK_History 0x1008FF37 /* Show history of web surfing */ #define XF86XK_OpenURL 0x1008FF38 /* Open selected URL */ #define XF86XK_AddFavorite 0x1008FF39 /* Add URL to favorites list */ #define XF86XK_HotLinks 0x1008FF3A /* Show "hot" links */ #define XF86XK_BrightnessAdjust 0x1008FF3B /* Invoke brightness adj. UI */ #define XF86XK_Finance 0x1008FF3C /* Display financial site */ #define XF86XK_Community 0x1008FF3D /* Display user's community */ #define XF86XK_AudioRewind 0x1008FF3E /* "rewind" audio track */ #define XF86XK_BackForward 0x1008FF3F /* ??? */ #define XF86XK_Launch0 0x1008FF40 /* Launch Application */ #define XF86XK_Launch1 0x1008FF41 /* Launch Application */ #define XF86XK_Launch2 0x1008FF42 /* Launch Application */ #define XF86XK_Launch3 0x1008FF43 /* Launch Application */ #define XF86XK_Launch4 0x1008FF44 /* Launch Application */ #define XF86XK_Launch5 0x1008FF45 /* Launch Application */ #define XF86XK_Launch6 0x1008FF46 /* Launch Application */ #define XF86XK_Launch7 0x1008FF47 /* Launch Application */ #define XF86XK_Launch8 0x1008FF48 /* Launch Application */ #define XF86XK_Launch9 0x1008FF49 /* Launch Application */ #define XF86XK_LaunchA 0x1008FF4A /* Launch Application */ #define XF86XK_LaunchB 0x1008FF4B /* Launch Application */ #define XF86XK_LaunchC 0x1008FF4C /* Launch Application */ #define XF86XK_LaunchD 0x1008FF4D /* Launch Application */ #define XF86XK_LaunchE 0x1008FF4E /* Launch Application */ #define XF86XK_LaunchF 0x1008FF4F /* Launch Application */ #define XF86XK_ApplicationLeft 0x1008FF50 /* switch to application, left */ #define XF86XK_ApplicationRight 0x1008FF51 /* switch to application, right*/ #define XF86XK_Book 0x1008FF52 /* Launch bookreader */ #define XF86XK_CD 0x1008FF53 /* Launch CD/DVD player */ #define XF86XK_Calculater 0x1008FF54 /* Launch Calculater */ #define XF86XK_Clear 0x1008FF55 /* Clear window, screen */ #define XF86XK_Close 0x1008FF56 /* Close window */ #define XF86XK_Copy 0x1008FF57 /* Copy selection */ #define XF86XK_Cut 0x1008FF58 /* Cut selection */ #define XF86XK_Display 0x1008FF59 /* Output switch key */ #define XF86XK_DOS 0x1008FF5A /* Launch DOS (emulation) */ #define XF86XK_Documents 0x1008FF5B /* Open documents window */ #define XF86XK_Excel 0x1008FF5C /* Launch spread sheet */ #define XF86XK_Explorer 0x1008FF5D /* Launch file explorer */ #define XF86XK_Game 0x1008FF5E /* Launch game */ #define XF86XK_Go 0x1008FF5F /* Go to URL */ #define XF86XK_iTouch 0x1008FF60 /* Logitch iTouch- don't use */ #define XF86XK_LogOff 0x1008FF61 /* Log off system */ #define XF86XK_Market 0x1008FF62 /* ?? */ #define XF86XK_Meeting 0x1008FF63 /* enter meeting in calendar */ #define XF86XK_MenuKB 0x1008FF65 /* distingush keyboard from PB */ #define XF86XK_MenuPB 0x1008FF66 /* distinuish PB from keyboard */ #define XF86XK_MySites 0x1008FF67 /* Favourites */ #define XF86XK_New 0x1008FF68 /* New (folder, document... */ #define XF86XK_News 0x1008FF69 /* News */ #define XF86XK_OfficeHome 0x1008FF6A /* Office home (old Staroffice)*/ #define XF86XK_Open 0x1008FF6B /* Open */ #define XF86XK_Option 0x1008FF6C /* ?? */ #define XF86XK_Paste 0x1008FF6D /* Paste */ #define XF86XK_Phone 0x1008FF6E /* Launch phone; dial number */ #define XF86XK_Q 0x1008FF70 /* Compaq's Q - don't use */ #define XF86XK_Reply 0x1008FF72 /* Reply e.g., mail */ #define XF86XK_Reload 0x1008FF73 /* Reload web page, file, etc. */ #define XF86XK_RotateWindows 0x1008FF74 /* Rotate windows e.g. xrandr */ #define XF86XK_RotationPB 0x1008FF75 /* don't use */ #define XF86XK_RotationKB 0x1008FF76 /* don't use */ #define XF86XK_Save 0x1008FF77 /* Save (file, document, state */ #define XF86XK_ScrollUp 0x1008FF78 /* Scroll window/contents up */ #define XF86XK_ScrollDown 0x1008FF79 /* Scrool window/contentd down */ #define XF86XK_ScrollClick 0x1008FF7A /* Use XKB mousekeys instead */ #define XF86XK_Send 0x1008FF7B /* Send mail, file, object */ #define XF86XK_Spell 0x1008FF7C /* Spell checker */ #define XF86XK_SplitScreen 0x1008FF7D /* Split window or screen */ #define XF86XK_Support 0x1008FF7E /* Get support (??) */ #define XF86XK_TaskPane 0x1008FF7F /* Show tasks */ #define XF86XK_Terminal 0x1008FF80 /* Launch terminal emulator */ #define XF86XK_Tools 0x1008FF81 /* toolbox of desktop/app. */ #define XF86XK_Travel 0x1008FF82 /* ?? */ #define XF86XK_UserPB 0x1008FF84 /* ?? */ #define XF86XK_User1KB 0x1008FF85 /* ?? */ #define XF86XK_User2KB 0x1008FF86 /* ?? */ #define XF86XK_Video 0x1008FF87 /* Launch video player */ #define XF86XK_WheelButton 0x1008FF88 /* button from a mouse wheel */ #define XF86XK_Word 0x1008FF89 /* Launch word processor */ #define XF86XK_Xfer 0x1008FF8A #define XF86XK_ZoomIn 0x1008FF8B /* zoom in view, map, etc. */ #define XF86XK_ZoomOut 0x1008FF8C /* zoom out view, map, etc. */ #define XF86XK_Away 0x1008FF8D /* mark yourself as away */ #define XF86XK_Messenger 0x1008FF8E /* as in instant messaging */ #define XF86XK_WebCam 0x1008FF8F /* Launch web camera app. */ #define XF86XK_MailForward 0x1008FF90 /* Forward in mail */ #define XF86XK_Pictures 0x1008FF91 /* Show pictures */ #define XF86XK_Music 0x1008FF92 /* Launch music application */ #define XF86XK_Battery 0x1008FF93 /* Display battery information */ #define XF86XK_Bluetooth 0x1008FF94 /* Enable/disable Bluetooth */ #define XF86XK_WLAN 0x1008FF95 /* Enable/disable WLAN */ #define XF86XK_UWB 0x1008FF96 /* Enable/disable UWB */ #define XF86XK_AudioForward 0x1008FF97 /* fast-forward audio track */ #define XF86XK_AudioRepeat 0x1008FF98 /* toggle repeat mode */ #define XF86XK_AudioRandomPlay 0x1008FF99 /* toggle shuffle mode */ #define XF86XK_Subtitle 0x1008FF9A /* cycle through subtitle */ #define XF86XK_AudioCycleTrack 0x1008FF9B /* cycle through audio tracks */ #define XF86XK_CycleAngle 0x1008FF9C /* cycle through angles */ #define XF86XK_FrameBack 0x1008FF9D /* video: go one frame back */ #define XF86XK_FrameForward 0x1008FF9E /* video: go one frame forward */ #define XF86XK_Time 0x1008FF9F /* display, or shows an entry for time seeking */ #define XF86XK_Select 0x1008FFA0 /* Select button on joypads and remotes */ #define XF86XK_View 0x1008FFA1 /* Show a view options/properties */ #define XF86XK_TopMenu 0x1008FFA2 /* Go to a top-level menu in a video */ #define XF86XK_Red 0x1008FFA3 /* Red button */ #define XF86XK_Green 0x1008FFA4 /* Green button */ #define XF86XK_Yellow 0x1008FFA5 /* Yellow button */ #define XF86XK_Blue 0x1008FFA6 /* Blue button */ #define XF86XK_Suspend 0x1008FFA7 /* Sleep to RAM */ #define XF86XK_Hibernate 0x1008FFA8 /* Sleep to disk */ #define XF86XK_TouchpadToggle 0x1008FFA9 /* Toggle between touchpad/trackstick */ #define XF86XK_TouchpadOn 0x1008FFB0 /* The touchpad got switched on */ #define XF86XK_TouchpadOff 0x1008FFB1 /* The touchpad got switched off */ /* Keys for special action keys (hot keys) */ /* Virtual terminals on some operating systems */ #define XF86XK_Switch_VT_1 0x1008FE01 #define XF86XK_Switch_VT_2 0x1008FE02 #define XF86XK_Switch_VT_3 0x1008FE03 #define XF86XK_Switch_VT_4 0x1008FE04 #define XF86XK_Switch_VT_5 0x1008FE05 #define XF86XK_Switch_VT_6 0x1008FE06 #define XF86XK_Switch_VT_7 0x1008FE07 #define XF86XK_Switch_VT_8 0x1008FE08 #define XF86XK_Switch_VT_9 0x1008FE09 #define XF86XK_Switch_VT_10 0x1008FE0A #define XF86XK_Switch_VT_11 0x1008FE0B #define XF86XK_Switch_VT_12 0x1008FE0C #define XF86XK_Ungrab 0x1008FE20 /* force ungrab */ #define XF86XK_ClearGrab 0x1008FE21 /* kill application with grab */ #define XF86XK_Next_VMode 0x1008FE22 /* next video mode available */ #define XF86XK_Prev_VMode 0x1008FE23 /* prev. video mode available */ #define XF86XK_LogWindowTree 0x1008FE24 /* print window tree to log */ #define XF86XK_LogGrabInfo 0x1008FE25 /* print all active grabs to log */
Pytanie teraz jak to edytować? bo mam cody klawiszy z pliku lirc. conf one są inne:
POWER 0X0000000000000080 TV 0X00000000000000D6 FM 0X00000000000000D7 DVD 0X00000000000000D8 RED 0X00000000000000CB GREEN 0X00000000000000CC YELLOW 0X00000000000000CD BLUE 0X00000000000000CE TELETEXT 0X000000000000009F SLEEP 0X00000000000000C0 MUTE 0X0000000000000094 BOSS_KEY 0X00000000000000C9 CH_UP 0X000000000000008C CH_DOWN 0X0000000000000090 VOL_DOWN 0X0000000000000088 VOL_UP 0X0000000000000084 ENTER 0X0000000000000093 CC 0X00000000000000D0 FULLSCREEN 0X0000000000000083 MENU 0X00000000000000CF SCAN 0X00000000000000D1 REPLAY 0X00000000000000C2 PLAY 0X00000000000000C3 SKIP 0X00000000000000C4 OSD 0X00000000000000D2 BACK 0X00000000000000D4 STOP 0X00000000000000C6 FORWARD 0X00000000000000D5 LANGUAGE 0X00000000000000D3 1 0X0000000000000085 2 0X0000000000000086 3 0X0000000000000087 4 0X0000000000000089 5 0X000000000000008A 6 0X000000000000008B 7 0X000000000000008D 8 0X000000000000008E 9 0X000000000000008F 0 0X0000000000000092 . 0X00000000000000C1 RECALL 0X0000000000000061 VIDEO 0X000000000000009E AUDIO 0X000000000000009B DISPLAY 0X0000000000000096 SNAPSHOT 0X00000000000000C8 PIP 0X00000000000000CA RECSTOP 0X00000000000000C6 REC 0X00000000000000C7 TIMESHIFT 0X00000000000000C5
Nie wiem jak przy pomocy tego programu Xmodmap dopisać konfigurację pozostałych klawiszy. Xev wykrywa mi tylko te klawisze na pilocie o których już mówiłem a co z resztą?
Ostatnio edytowany przez vnu007dl (2012-09-24 23:32:09)
Offline
Jeśli xev nie reaguje w ogóle (może też wypisywać "NoSymbol" - wtedy patrz niżej) na część klawiszy, to sprawa jest jeszcze bardziej zagmatwana. Ostrzegałem :) Dość ładnie jest to wytłumaczone na [url=https://wiki.archlinux.org/index.php/Map_scancodes_to_keycodes]wiki Archa[/url].
Jeśli xev reaguje, to wystarczy przypisać poszczególnym kodom klawiszy jakieś znaczenie. Trzeba utworzyć plik
~/.Xmodmap
o przykładowej treści
keycode 136 = XF86AudioStop keycode 169 = XF86AudioPrev
itp, gdzie numer kodu odczytujemy z xev, wciskając dany przycisk na pilocie, a przypisywaną wartość wybieramy np. z pliku o którym pisaliśmy wcześniej.
Offline
hmm tylko, że jest taki problem, że to nie działa.
Wpisuję kody klawiszy. Dla przykładu chciałem klawisze chanell up i down ich kody u mnie to 402 i 403, ale nie było takich opisów więc dałem page up i down, ale to chyba nieistotne. W każdym bądź razem wygląda to u mnie tak:
keycode 402 = XF86XK_ScrollUp keycode 403 = XF86XK_ScrollDown
Odpalam xev ... i brak jakiejkolwiek reakcji, Jakakolwiek aplikacja też nie reaguje przy próbie przechwycenia tego skrótu dla przycisku.
Kody przycisków wziąłem z aplikacji showkey, tutaj właśnie dla omawianych przycisków chanell up i down:
root@darek-PC:/home/darek# showkey -k tryb kb był RAW [ jeśli to jest wykonywane pod X, może nie działać ponieważ X serwer także czyta /dev/console ] proszę nacisnąć dowolny klawisz (program zakończy się 10s po ostatnim)... kod klawisza 28 puszczenie kod klawisza 402 naciśnięcie kod klawisza 402 puszczenie kod klawisza 403 naciśnięcie kod klawisza 403 puszczenie
Offline
Skoro xev nie reaguje, to - jak wspomniałem - sprawa się gmatwa jeszcze bardziej. X11 obsługuje tylko keycody<256, dlatego należy posłużyć się scancodami (czyli wartościami zwracanymi przez jądro) i przetłumaczyć je na keycody widoczne dla X11. Link podałem wcześniej - u siebie konfigurowałem to starszą, drugą z podanych metod - setkeycodes.
Offline
ufa, robi się ciekawie. Rozumiem, że ten link o którym kolega wspominał to ten wiki archa tak?
Zgodnie więc z tym, jako, że wiem, że mój pilot ma event13 to:
root@darek-PC:/home/darek# /lib/udev/keymap -i input/event13 Press ESC to finish, or Control-C if this device is not your primary keyboard scan code: 0x00 key code: power2 scan code: 0x36 key code: tv scan code: 0x22 key code: previous scan code: 0x23 key code: playpause scan code: 0x24 key code: next scan code: 0x25 key code: time scan code: 0x34 key code: rewind scan code: 0x26 key code: stop scan code: 0x35 key code: fastforward scan code: 0x27 key code: record scan code: 0x05 key code: 1 scan code: 0x06 key code: 2 scan code: 0x07 key code: 3 scan code: 0x33 key code: language scan code: 0x09 key code: 4 scan code: 0x0A key code: 5 scan code: 0x0B key code: 6 scan code: 0x03 key code: zoom scan code: 0x0D key code: 7 scan code: 0x0E key code: 8 scan code: 0x0F key code: 9 scan code: 0x11 key code: last scan code: 0x21 key code: dot scan code: 0x12 key code: 0 scan code: 0x16 key code: info scan code: 0x28 key code: camera scan code: 0x2F key code: menu scan code: 0x30 key code: cancel scan code: 0x08 key code: left scan code: 0x13 key code: enter scan code: 0x04 key code: right scan code: 0x14 key code: mute scan code: 0x10 key code: down scan code: 0x3E key code: volumeup scan code: 0x3A key code: volumedown scan code: 0x1B key code: audio scan code: 0x1E key code: video scan code: 0x3B key code: channelup scan code: 0x3F key code: channeldown scan code: 0x2B key code: red scan code: 0x2C key code: green scan code: 0x2D key code: yellow scan code: 0x2E key code: blue scan code: 0x1F key code: text scan code: 0x31 key code: channel scan code: 0x2A key code: tv2 scan code: 0x29 key code: clear ^[^[ ^[^[^[^[^[
Nie mogę jednak tego zamknąć, naciskam esc i wyskakują mi powyższe chaszcze.
nast komenda zwraca coś takiego:
darek@darek-PC:~$ /lib/udev/findkeyboards USB keyboard: input/event14 USB keyboard: input/event2
Co dalej mógłbym prosić kolegę jeszcze o pomoc bo trochę ten rekst dalej jest dla mnie grząski i nie bardzo rozumiem co mam dalej zrobić?
Rozumiem, że na podstawie powyżej otrzymanych kodów muszę edytować plik: /usr/include/linux/input.h
U mnie on wygląda tak:
#ifndef _INPUT_H #define _INPUT_H /* * Copyright (c) 1999-2002 Vojtech Pavlik * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ #include <sys/time.h> #include <sys/ioctl.h> #include <sys/types.h> #include <linux/types.h> /* * The event structure itself */ struct input_event { struct timeval time; __u16 type; __u16 code; __s32 value; }; /* * Protocol version. */ #define EV_VERSION 0x010001 /* * IOCTLs (0x00 - 0x7f) */ struct input_id { __u16 bustype; __u16 vendor; __u16 product; __u16 version; }; /** * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls * @value: latest reported value for the axis. * @minimum: specifies minimum value for the axis. * @maximum: specifies maximum value for the axis. * @fuzz: specifies fuzz value that is used to filter noise from * the event stream. * @flat: values that are within this value will be discarded by * joydev interface and reported as 0 instead. * @resolution: specifies resolution for the values reported for * the axis. * * Note that input core does not clamp reported values to the * [minimum, maximum] limits, such task is left to userspace. * * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in * units per millimeter (units/mm), resolution for rotational axes * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. */ struct input_absinfo { __s32 value; __s32 minimum; __s32 maximum; __s32 fuzz; __s32 flat; __s32 resolution; }; /** * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls * @scancode: scancode represented in machine-endian form. * @len: length of the scancode that resides in @scancode buffer. * @index: index in the keymap, may be used instead of scancode * @flags: allows to specify how kernel should handle the request. For * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel * should perform lookup in keymap by @index instead of @scancode * @keycode: key code assigned to this scancode * * The structure is used to retrieve and modify keymap data. Users have * option of performing lookup either by @scancode itself or by @index * in keymap entry. EVIOCGKEYCODE will also return scancode or index * (depending on which element was used to perform lookup). */ struct input_keymap_entry { #define INPUT_KEYMAP_BY_INDEX (1 << 0) __u8 flags; __u8 len; __u16 index; __u32 keycode; __u8 scancode[32]; }; #define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ #define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ #define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ #define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ #define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ #define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) #define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ #define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ #define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ #define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ #define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ #define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ #define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ #define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ #define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ #define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ /* * Device properties and quirks */ #define INPUT_PROP_POINTER 0x00 /* needs a pointer */ #define INPUT_PROP_DIRECT 0x01 /* direct input devices */ #define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ #define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ #define INPUT_PROP_MAX 0x1f #define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) /* * Event types */ #define EV_SYN 0x00 #define EV_KEY 0x01 #define EV_REL 0x02 #define EV_ABS 0x03 #define EV_MSC 0x04 #define EV_SW 0x05 #define EV_LED 0x11 #define EV_SND 0x12 #define EV_REP 0x14 #define EV_FF 0x15 #define EV_PWR 0x16 #define EV_FF_STATUS 0x17 #define EV_MAX 0x1f #define EV_CNT (EV_MAX+1) /* * Synchronization events. */ #define SYN_REPORT 0 #define SYN_CONFIG 1 #define SYN_MT_REPORT 2 #define SYN_DROPPED 3 /* * Keys and buttons * * Most of the keys/buttons are modeled after USB HUT 1.12 * (see http://www.usb.org/developers/hidpage). * Abbreviations in the comments: * AC - Application Control * AL - Application Launch Button * SC - System Control */ #define KEY_RESERVED 0 #define KEY_ESC 1 #define KEY_1 2 #define KEY_2 3 #define KEY_3 4 #define KEY_4 5 #define KEY_5 6 #define KEY_6 7 #define KEY_7 8 #define KEY_8 9 #define KEY_9 10 #define KEY_0 11 #define KEY_MINUS 12 #define KEY_EQUAL 13 #define KEY_BACKSPACE 14 #define KEY_TAB 15 #define KEY_Q 16 #define KEY_W 17 #define KEY_E 18 #define KEY_R 19 #define KEY_T 20 #define KEY_Y 21 #define KEY_U 22 #define KEY_I 23 #define KEY_O 24 #define KEY_P 25 #define KEY_LEFTBRACE 26 #define KEY_RIGHTBRACE 27 #define KEY_ENTER 28 #define KEY_LEFTCTRL 29 #define KEY_A 30 #define KEY_S 31 #define KEY_D 32 #define KEY_F 33 #define KEY_G 34 #define KEY_H 35 #define KEY_J 36 #define KEY_K 37 #define KEY_L 38 #define KEY_SEMICOLON 39 #define KEY_APOSTROPHE 40 #define KEY_GRAVE 41 #define KEY_LEFTSHIFT 42 #define KEY_BACKSLASH 43 #define KEY_Z 44 #define KEY_X 45 #define KEY_C 46 #define KEY_V 47 #define KEY_B 48 #define KEY_N 49 #define KEY_M 50 #define KEY_COMMA 51 #define KEY_DOT 52 #define KEY_SLASH 53 #define KEY_RIGHTSHIFT 54 #define KEY_KPASTERISK 55 #define KEY_LEFTALT 56 #define KEY_SPACE 57 #define KEY_CAPSLOCK 58 #define KEY_F1 59 #define KEY_F2 60 #define KEY_F3 61 #define KEY_F4 62 #define KEY_F5 63 #define KEY_F6 64 #define KEY_F7 65 #define KEY_F8 66 #define KEY_F9 67 #define KEY_F10 68 #define KEY_NUMLOCK 69 #define KEY_SCROLLLOCK 70 #define KEY_KP7 71 #define KEY_KP8 72 #define KEY_KP9 73 #define KEY_KPMINUS 74 #define KEY_KP4 75 #define KEY_KP5 76 #define KEY_KP6 77 #define KEY_KPPLUS 78 #define KEY_KP1 79 #define KEY_KP2 80 #define KEY_KP3 81 #define KEY_KP0 82 #define KEY_KPDOT 83 #define KEY_ZENKAKUHANKAKU 85 #define KEY_102ND 86 #define KEY_F11 87 #define KEY_F12 88 #define KEY_RO 89 #define KEY_KATAKANA 90 #define KEY_HIRAGANA 91 #define KEY_HENKAN 92 #define KEY_KATAKANAHIRAGANA 93 #define KEY_MUHENKAN 94 #define KEY_KPJPCOMMA 95 #define KEY_KPENTER 96 #define KEY_RIGHTCTRL 97 #define KEY_KPSLASH 98 #define KEY_SYSRQ 99 #define KEY_RIGHTALT 100 #define KEY_LINEFEED 101 #define KEY_HOME 102 #define KEY_UP 103 #define KEY_PAGEUP 104 #define KEY_LEFT 105 #define KEY_RIGHT 106 #define KEY_END 107 #define KEY_DOWN 108 #define KEY_PAGEDOWN 109 #define KEY_INSERT 110 #define KEY_DELETE 111 #define KEY_MACRO 112 #define KEY_MUTE 113 #define KEY_VOLUMEDOWN 114 #define KEY_VOLUMEUP 115 #define KEY_POWER 116 /* SC System Power Down */ #define KEY_KPEQUAL 117 #define KEY_KPPLUSMINUS 118 #define KEY_PAUSE 119 #define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ #define KEY_KPCOMMA 121 #define KEY_HANGEUL 122 #define KEY_HANGUEL KEY_HANGEUL #define KEY_HANJA 123 #define KEY_YEN 124 #define KEY_LEFTMETA 125 #define KEY_RIGHTMETA 126 #define KEY_COMPOSE 127 #define KEY_STOP 128 /* AC Stop */ #define KEY_AGAIN 129 #define KEY_PROPS 130 /* AC Properties */ #define KEY_UNDO 131 /* AC Undo */ #define KEY_FRONT 132 #define KEY_COPY 133 /* AC Copy */ #define KEY_OPEN 134 /* AC Open */ #define KEY_PASTE 135 /* AC Paste */ #define KEY_FIND 136 /* AC Search */ #define KEY_CUT 137 /* AC Cut */ #define KEY_HELP 138 /* AL Integrated Help Center */ #define KEY_MENU 139 /* Menu (show menu) */ #define KEY_CALC 140 /* AL Calculator */ #define KEY_SETUP 141 #define KEY_SLEEP 142 /* SC System Sleep */ #define KEY_WAKEUP 143 /* System Wake Up */ #define KEY_FILE 144 /* AL Local Machine Browser */ #define KEY_SENDFILE 145 #define KEY_DELETEFILE 146 #define KEY_XFER 147 #define KEY_PROG1 148 #define KEY_PROG2 149 #define KEY_WWW 150 /* AL Internet Browser */ #define KEY_MSDOS 151 #define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ #define KEY_SCREENLOCK KEY_COFFEE #define KEY_DIRECTION 153 #define KEY_CYCLEWINDOWS 154 #define KEY_MAIL 155 #define KEY_BOOKMARKS 156 /* AC Bookmarks */ #define KEY_COMPUTER 157 #define KEY_BACK 158 /* AC Back */ #define KEY_FORWARD 159 /* AC Forward */ #define KEY_CLOSECD 160 #define KEY_EJECTCD 161 #define KEY_EJECTCLOSECD 162 #define KEY_NEXTSONG 163 #define KEY_PLAYPAUSE 164 #define KEY_PREVIOUSSONG 165 #define KEY_STOPCD 166 #define KEY_RECORD 167 #define KEY_REWIND 168 #define KEY_PHONE 169 /* Media Select Telephone */ #define KEY_ISO 170 #define KEY_CONFIG 171 /* AL Consumer Control Configuration */ #define KEY_HOMEPAGE 172 /* AC Home */ #define KEY_REFRESH 173 /* AC Refresh */ #define KEY_EXIT 174 /* AC Exit */ #define KEY_MOVE 175 #define KEY_EDIT 176 #define KEY_SCROLLUP 177 #define KEY_SCROLLDOWN 178 #define KEY_KPLEFTPAREN 179 #define KEY_KPRIGHTPAREN 180 #define KEY_NEW 181 /* AC New */ #define KEY_REDO 182 /* AC Redo/Repeat */ #define KEY_F13 183 #define KEY_F14 184 #define KEY_F15 185 #define KEY_F16 186 #define KEY_F17 187 #define KEY_F18 188 #define KEY_F19 189 #define KEY_F20 190 #define KEY_F21 191 #define KEY_F22 192 #define KEY_F23 193 #define KEY_F24 194 #define KEY_PLAYCD 200 #define KEY_PAUSECD 201 #define KEY_PROG3 202 #define KEY_PROG4 203 #define KEY_DASHBOARD 204 /* AL Dashboard */ #define KEY_SUSPEND 205 #define KEY_CLOSE 206 /* AC Close */ #define KEY_PLAY 207 #define KEY_FASTFORWARD 208 #define KEY_BASSBOOST 209 #define KEY_PRINT 210 /* AC Print */ #define KEY_HP 211 #define KEY_CAMERA 212 #define KEY_SOUND 213 #define KEY_QUESTION 214 #define KEY_EMAIL 215 #define KEY_CHAT 216 #define KEY_SEARCH 217 #define KEY_CONNECT 218 #define KEY_FINANCE 219 /* AL Checkbook/Finance */ #define KEY_SPORT 220 #define KEY_SHOP 221 #define KEY_ALTERASE 222 #define KEY_CANCEL 223 /* AC Cancel */ #define KEY_BRIGHTNESSDOWN 224 #define KEY_BRIGHTNESSUP 225 #define KEY_MEDIA 226 #define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video outputs (Monitor/LCD/TV-out/etc) */ #define KEY_KBDILLUMTOGGLE 228 #define KEY_KBDILLUMDOWN 229 #define KEY_KBDILLUMUP 230 #define KEY_SEND 231 /* AC Send */ #define KEY_REPLY 232 /* AC Reply */ #define KEY_FORWARDMAIL 233 /* AC Forward Msg */ #define KEY_SAVE 234 /* AC Save */ #define KEY_DOCUMENTS 235 #define KEY_BATTERY 236 #define KEY_BLUETOOTH 237 #define KEY_WLAN 238 #define KEY_UWB 239 #define KEY_UNKNOWN 240 #define KEY_VIDEO_NEXT 241 /* drive next video source */ #define KEY_VIDEO_PREV 242 /* drive previous video source */ #define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ #define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ #define KEY_DISPLAY_OFF 245 /* display device to off state */ #define KEY_WIMAX 246 #define KEY_RFKILL 247 /* Key that controls all radios */ #define KEY_MICMUTE 248 /* Mute / unmute the microphone */ /* Code 255 is reserved for special needs of AT keyboard driver */ #define BTN_MISC 0x100 #define BTN_0 0x100 #define BTN_1 0x101 #define BTN_2 0x102 #define BTN_3 0x103 #define BTN_4 0x104 #define BTN_5 0x105 #define BTN_6 0x106 #define BTN_7 0x107 #define BTN_8 0x108 #define BTN_9 0x109 #define BTN_MOUSE 0x110 #define BTN_LEFT 0x110 #define BTN_RIGHT 0x111 #define BTN_MIDDLE 0x112 #define BTN_SIDE 0x113 #define BTN_EXTRA 0x114 #define BTN_FORWARD 0x115 #define BTN_BACK 0x116 #define BTN_TASK 0x117 #define BTN_JOYSTICK 0x120 #define BTN_TRIGGER 0x120 #define BTN_THUMB 0x121 #define BTN_THUMB2 0x122 #define BTN_TOP 0x123 #define BTN_TOP2 0x124 #define BTN_PINKIE 0x125 #define BTN_BASE 0x126 #define BTN_BASE2 0x127 #define BTN_BASE3 0x128 #define BTN_BASE4 0x129 #define BTN_BASE5 0x12a #define BTN_BASE6 0x12b #define BTN_DEAD 0x12f #define BTN_GAMEPAD 0x130 #define BTN_A 0x130 #define BTN_B 0x131 #define BTN_C 0x132 #define BTN_X 0x133 #define BTN_Y 0x134 #define BTN_Z 0x135 #define BTN_TL 0x136 #define BTN_TR 0x137 #define BTN_TL2 0x138 #define BTN_TR2 0x139 #define BTN_SELECT 0x13a #define BTN_START 0x13b #define BTN_MODE 0x13c #define BTN_THUMBL 0x13d #define BTN_THUMBR 0x13e #define BTN_DIGI 0x140 #define BTN_TOOL_PEN 0x140 #define BTN_TOOL_RUBBER 0x141 #define BTN_TOOL_BRUSH 0x142 #define BTN_TOOL_PENCIL 0x143 #define BTN_TOOL_AIRBRUSH 0x144 #define BTN_TOOL_FINGER 0x145 #define BTN_TOOL_MOUSE 0x146 #define BTN_TOOL_LENS 0x147 #define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ #define BTN_TOUCH 0x14a #define BTN_STYLUS 0x14b #define BTN_STYLUS2 0x14c #define BTN_TOOL_DOUBLETAP 0x14d #define BTN_TOOL_TRIPLETAP 0x14e #define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ #define BTN_WHEEL 0x150 #define BTN_GEAR_DOWN 0x150 #define BTN_GEAR_UP 0x151 #define KEY_OK 0x160 #define KEY_SELECT 0x161 #define KEY_GOTO 0x162 #define KEY_CLEAR 0x163 #define KEY_POWER2 0x164 #define KEY_OPTION 0x165 #define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ #define KEY_TIME 0x167 #define KEY_VENDOR 0x168 #define KEY_ARCHIVE 0x169 #define KEY_PROGRAM 0x16a /* Media Select Program Guide */ #define KEY_CHANNEL 0x16b #define KEY_FAVORITES 0x16c #define KEY_EPG 0x16d #define KEY_PVR 0x16e /* Media Select Home */ #define KEY_MHP 0x16f #define KEY_LANGUAGE 0x170 #define KEY_TITLE 0x171 #define KEY_SUBTITLE 0x172 #define KEY_ANGLE 0x173 #define KEY_ZOOM 0x174 #define KEY_MODE 0x175 #define KEY_KEYBOARD 0x176 #define KEY_SCREEN 0x177 #define KEY_PC 0x178 /* Media Select Computer */ #define KEY_TV 0x179 /* Media Select TV */ #define KEY_TV2 0x17a /* Media Select Cable */ #define KEY_VCR 0x17b /* Media Select VCR */ #define KEY_VCR2 0x17c /* VCR Plus */ #define KEY_SAT 0x17d /* Media Select Satellite */ #define KEY_SAT2 0x17e #define KEY_CD 0x17f /* Media Select CD */ #define KEY_TAPE 0x180 /* Media Select Tape */ #define KEY_RADIO 0x181 #define KEY_TUNER 0x182 /* Media Select Tuner */ #define KEY_PLAYER 0x183 #define KEY_TEXT 0x184 #define KEY_DVD 0x185 /* Media Select DVD */ #define KEY_AUX 0x186 #define KEY_MP3 0x187 #define KEY_AUDIO 0x188 /* AL Audio Browser */ #define KEY_VIDEO 0x189 /* AL Movie Browser */ #define KEY_DIRECTORY 0x18a #define KEY_LIST 0x18b #define KEY_MEMO 0x18c /* Media Select Messages */ #define KEY_CALENDAR 0x18d #define KEY_RED 0x18e #define KEY_GREEN 0x18f #define KEY_YELLOW 0x190 #define KEY_BLUE 0x191 #define KEY_CHANNELUP 0x192 /* Channel Increment */ #define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ #define KEY_FIRST 0x194 #define KEY_LAST 0x195 /* Recall Last */ #define KEY_AB 0x196 #define KEY_NEXT 0x197 #define KEY_RESTART 0x198 #define KEY_SLOW 0x199 #define KEY_SHUFFLE 0x19a #define KEY_BREAK 0x19b #define KEY_PREVIOUS 0x19c #define KEY_DIGITS 0x19d #define KEY_TEEN 0x19e #define KEY_TWEN 0x19f #define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ #define KEY_GAMES 0x1a1 /* Media Select Games */ #define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ #define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ #define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ #define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ #define KEY_EDITOR 0x1a6 /* AL Text Editor */ #define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ #define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ #define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ #define KEY_DATABASE 0x1aa /* AL Database App */ #define KEY_NEWS 0x1ab /* AL Newsreader */ #define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ #define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ #define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ #define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ #define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ #define KEY_LOGOFF 0x1b1 /* AL Logoff */ #define KEY_DOLLAR 0x1b2 #define KEY_EURO 0x1b3 #define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ #define KEY_FRAMEFORWARD 0x1b5 #define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ #define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ #define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ #define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ #define KEY_IMAGES 0x1ba /* AL Image Browser */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 #define KEY_INS_LINE 0x1c2 #define KEY_DEL_LINE 0x1c3 #define KEY_FN 0x1d0 #define KEY_FN_ESC 0x1d1 #define KEY_FN_F1 0x1d2 #define KEY_FN_F2 0x1d3 #define KEY_FN_F3 0x1d4 #define KEY_FN_F4 0x1d5 #define KEY_FN_F5 0x1d6 #define KEY_FN_F6 0x1d7 #define KEY_FN_F7 0x1d8 #define KEY_FN_F8 0x1d9 #define KEY_FN_F9 0x1da #define KEY_FN_F10 0x1db #define KEY_FN_F11 0x1dc #define KEY_FN_F12 0x1dd #define KEY_FN_1 0x1de #define KEY_FN_2 0x1df #define KEY_FN_D 0x1e0 #define KEY_FN_E 0x1e1 #define KEY_FN_F 0x1e2 #define KEY_FN_S 0x1e3 #define KEY_FN_B 0x1e4 #define KEY_BRL_DOT1 0x1f1 #define KEY_BRL_DOT2 0x1f2 #define KEY_BRL_DOT3 0x1f3 #define KEY_BRL_DOT4 0x1f4 #define KEY_BRL_DOT5 0x1f5 #define KEY_BRL_DOT6 0x1f6 #define KEY_BRL_DOT7 0x1f7 #define KEY_BRL_DOT8 0x1f8 #define KEY_BRL_DOT9 0x1f9 #define KEY_BRL_DOT10 0x1fa #define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ #define KEY_NUMERIC_1 0x201 /* and other keypads */ #define KEY_NUMERIC_2 0x202 #define KEY_NUMERIC_3 0x203 #define KEY_NUMERIC_4 0x204 #define KEY_NUMERIC_5 0x205 #define KEY_NUMERIC_6 0x206 #define KEY_NUMERIC_7 0x207 #define KEY_NUMERIC_8 0x208 #define KEY_NUMERIC_9 0x209 #define KEY_NUMERIC_STAR 0x20a #define KEY_NUMERIC_POUND 0x20b #define KEY_CAMERA_FOCUS 0x210 #define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ #define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ #define KEY_TOUCHPAD_ON 0x213 #define KEY_TOUCHPAD_OFF 0x214 #define KEY_CAMERA_ZOOMIN 0x215 #define KEY_CAMERA_ZOOMOUT 0x216 #define KEY_CAMERA_UP 0x217 #define KEY_CAMERA_DOWN 0x218 #define KEY_CAMERA_LEFT 0x219 #define KEY_CAMERA_RIGHT 0x21a #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 #define BTN_TRIGGER_HAPPY3 0x2c2 #define BTN_TRIGGER_HAPPY4 0x2c3 #define BTN_TRIGGER_HAPPY5 0x2c4 #define BTN_TRIGGER_HAPPY6 0x2c5 #define BTN_TRIGGER_HAPPY7 0x2c6 #define BTN_TRIGGER_HAPPY8 0x2c7 #define BTN_TRIGGER_HAPPY9 0x2c8 #define BTN_TRIGGER_HAPPY10 0x2c9 #define BTN_TRIGGER_HAPPY11 0x2ca #define BTN_TRIGGER_HAPPY12 0x2cb #define BTN_TRIGGER_HAPPY13 0x2cc #define BTN_TRIGGER_HAPPY14 0x2cd #define BTN_TRIGGER_HAPPY15 0x2ce #define BTN_TRIGGER_HAPPY16 0x2cf #define BTN_TRIGGER_HAPPY17 0x2d0 #define BTN_TRIGGER_HAPPY18 0x2d1 #define BTN_TRIGGER_HAPPY19 0x2d2 #define BTN_TRIGGER_HAPPY20 0x2d3 #define BTN_TRIGGER_HAPPY21 0x2d4 #define BTN_TRIGGER_HAPPY22 0x2d5 #define BTN_TRIGGER_HAPPY23 0x2d6 #define BTN_TRIGGER_HAPPY24 0x2d7 #define BTN_TRIGGER_HAPPY25 0x2d8 #define BTN_TRIGGER_HAPPY26 0x2d9 #define BTN_TRIGGER_HAPPY27 0x2da #define BTN_TRIGGER_HAPPY28 0x2db #define BTN_TRIGGER_HAPPY29 0x2dc #define BTN_TRIGGER_HAPPY30 0x2dd #define BTN_TRIGGER_HAPPY31 0x2de #define BTN_TRIGGER_HAPPY32 0x2df #define BTN_TRIGGER_HAPPY33 0x2e0 #define BTN_TRIGGER_HAPPY34 0x2e1 #define BTN_TRIGGER_HAPPY35 0x2e2 #define BTN_TRIGGER_HAPPY36 0x2e3 #define BTN_TRIGGER_HAPPY37 0x2e4 #define BTN_TRIGGER_HAPPY38 0x2e5 #define BTN_TRIGGER_HAPPY39 0x2e6 #define BTN_TRIGGER_HAPPY40 0x2e7 /* We avoid low common keys in module aliases so they don't get huge. */ #define KEY_MIN_INTERESTING KEY_MUTE #define KEY_MAX 0x2ff #define KEY_CNT (KEY_MAX+1) /* * Relative axes */ #define REL_X 0x00 #define REL_Y 0x01 #define REL_Z 0x02 #define REL_RX 0x03 #define REL_RY 0x04 #define REL_RZ 0x05 #define REL_HWHEEL 0x06 #define REL_DIAL 0x07 #define REL_WHEEL 0x08 #define REL_MISC 0x09 #define REL_MAX 0x0f #define REL_CNT (REL_MAX+1) /* * Absolute axes */ #define ABS_X 0x00 #define ABS_Y 0x01 #define ABS_Z 0x02 #define ABS_RX 0x03 #define ABS_RY 0x04 #define ABS_RZ 0x05 #define ABS_THROTTLE 0x06 #define ABS_RUDDER 0x07 #define ABS_WHEEL 0x08 #define ABS_GAS 0x09 #define ABS_BRAKE 0x0a #define ABS_HAT0X 0x10 #define ABS_HAT0Y 0x11 #define ABS_HAT1X 0x12 #define ABS_HAT1Y 0x13 #define ABS_HAT2X 0x14 #define ABS_HAT2Y 0x15 #define ABS_HAT3X 0x16 #define ABS_HAT3Y 0x17 #define ABS_PRESSURE 0x18 #define ABS_DISTANCE 0x19 #define ABS_TILT_X 0x1a #define ABS_TILT_Y 0x1b #define ABS_TOOL_WIDTH 0x1c #define ABS_VOLUME 0x20 #define ABS_MISC 0x28 #define ABS_MT_SLOT 0x2f /* MT slot being modified */ #define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ #define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ #define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ #define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ #define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ #define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ #define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ #define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ #define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) /* * Switch events */ #define SW_LID 0x00 /* set = lid shut */ #define SW_TABLET_MODE 0x01 /* set = tablet mode */ #define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ #define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" set = radio enabled */ #define SW_RADIO SW_RFKILL_ALL /* deprecated */ #define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ #define SW_DOCK 0x05 /* set = plugged into dock */ #define SW_LINEOUT_INSERT 0x06 /* set = inserted */ #define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ #define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ #define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ #define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ #define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ #define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ #define SW_LINEIN_INSERT 0x0d /* set = inserted */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) /* * Misc events */ #define MSC_SERIAL 0x00 #define MSC_PULSELED 0x01 #define MSC_GESTURE 0x02 #define MSC_RAW 0x03 #define MSC_SCAN 0x04 #define MSC_MAX 0x07 #define MSC_CNT (MSC_MAX+1) /* * LEDs */ #define LED_NUML 0x00 #define LED_CAPSL 0x01 #define LED_SCROLLL 0x02 #define LED_COMPOSE 0x03 #define LED_KANA 0x04 #define LED_SLEEP 0x05 #define LED_SUSPEND 0x06 #define LED_MUTE 0x07 #define LED_MISC 0x08 #define LED_MAIL 0x09 #define LED_CHARGING 0x0a #define LED_MAX 0x0f #define LED_CNT (LED_MAX+1) /* * Autorepeat values */ #define REP_DELAY 0x00 #define REP_PERIOD 0x01 #define REP_MAX 0x01 #define REP_CNT (REP_MAX+1) /* * Sounds */ #define SND_CLICK 0x00 #define SND_BELL 0x01 #define SND_TONE 0x02 #define SND_MAX 0x07 #define SND_CNT (SND_MAX+1) /* * IDs. */ #define ID_BUS 0 #define ID_VENDOR 1 #define ID_PRODUCT 2 #define ID_VERSION 3 #define BUS_PCI 0x01 #define BUS_ISAPNP 0x02 #define BUS_USB 0x03 #define BUS_HIL 0x04 #define BUS_BLUETOOTH 0x05 #define BUS_VIRTUAL 0x06 #define BUS_ISA 0x10 #define BUS_I8042 0x11 #define BUS_XTKBD 0x12 #define BUS_RS232 0x13 #define BUS_GAMEPORT 0x14 #define BUS_PARPORT 0x15 #define BUS_AMIGA 0x16 #define BUS_ADB 0x17 #define BUS_I2C 0x18 #define BUS_HOST 0x19 #define BUS_GSC 0x1A #define BUS_ATARI 0x1B #define BUS_SPI 0x1C /* * MT_TOOL types */ #define MT_TOOL_FINGER 0 #define MT_TOOL_PEN 1 #define MT_TOOL_MAX 1 /* * Values describing the status of a force-feedback effect */ #define FF_STATUS_STOPPED 0x00 #define FF_STATUS_PLAYING 0x01 #define FF_STATUS_MAX 0x01 /* * Structures used in ioctls to upload effects to a device * They are pieces of a bigger structure (called ff_effect) */ /* * All duration values are expressed in ms. Values above 32767 ms (0x7fff) * should not be used and have unspecified results. */ /** * struct ff_replay - defines scheduling of the force-feedback effect * @length: duration of the effect * @delay: delay before effect should start playing */ struct ff_replay { __u16 length; __u16 delay; }; /** * struct ff_trigger - defines what triggers the force-feedback effect * @button: number of the button triggering the effect * @interval: controls how soon the effect can be re-triggered */ struct ff_trigger { __u16 button; __u16 interval; }; /** * struct ff_envelope - generic force-feedback effect envelope * @attack_length: duration of the attack (ms) * @attack_level: level at the beginning of the attack * @fade_length: duration of fade (ms) * @fade_level: level at the end of fade * * The @attack_level and @fade_level are absolute values; when applying * envelope force-feedback core will convert to positive/negative * value based on polarity of the default level of the effect. * Valid range for the attack and fade levels is 0x0000 - 0x7fff */ struct ff_envelope { __u16 attack_length; __u16 attack_level; __u16 fade_length; __u16 fade_level; }; /** * struct ff_constant_effect - defines parameters of a constant force-feedback effect * @level: strength of the effect; may be negative * @envelope: envelope data */ struct ff_constant_effect { __s16 level; struct ff_envelope envelope; }; /** * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect * @start_level: beginning strength of the effect; may be negative * @end_level: final strength of the effect; may be negative * @envelope: envelope data */ struct ff_ramp_effect { __s16 start_level; __s16 end_level; struct ff_envelope envelope; }; /** * struct ff_condition_effect - defines a spring or friction force-feedback effect * @right_saturation: maximum level when joystick moved all way to the right * @left_saturation: same for the left side * @right_coeff: controls how fast the force grows when the joystick moves * to the right * @left_coeff: same for the left side * @deadband: size of the dead zone, where no force is produced * @center: position of the dead zone */ struct ff_condition_effect { __u16 right_saturation; __u16 left_saturation; __s16 right_coeff; __s16 left_coeff; __u16 deadband; __s16 center; }; /** * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect * @waveform: kind of the effect (wave) * @period: period of the wave (ms) * @magnitude: peak value * @offset: mean value of the wave (roughly) * @phase: 'horizontal' shift * @envelope: envelope data * @custom_len: number of samples (FF_CUSTOM only) * @custom_data: buffer of samples (FF_CUSTOM only) * * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined * for the time being as no driver supports it yet. * * Note: the data pointed by custom_data is copied by the driver. * You can therefore dispose of the memory after the upload/update. */ struct ff_periodic_effect { __u16 waveform; __u16 period; __s16 magnitude; __s16 offset; __u16 phase; struct ff_envelope envelope; __u32 custom_len; __s16 *custom_data; }; /** * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect * @strong_magnitude: magnitude of the heavy motor * @weak_magnitude: magnitude of the light one * * Some rumble pads have two motors of different weight. Strong_magnitude * represents the magnitude of the vibration generated by the heavy one. */ struct ff_rumble_effect { __u16 strong_magnitude; __u16 weak_magnitude; }; /** * struct ff_effect - defines force feedback effect * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) * @id: an unique id assigned to an effect * @direction: direction of the effect * @trigger: trigger conditions (struct ff_trigger) * @replay: scheduling of the effect (struct ff_replay) * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further * defining effect parameters * * This structure is sent through ioctl from the application to the driver. * To create a new effect application should set its @id to -1; the kernel * will return assigned @id which can later be used to update or delete * this effect. * * Direction of the effect is encoded as follows: * 0 deg -> 0x0000 (down) * 90 deg -> 0x4000 (left) * 180 deg -> 0x8000 (up) * 270 deg -> 0xC000 (right) */ struct ff_effect { __u16 type; __s16 id; __u16 direction; struct ff_trigger trigger; struct ff_replay replay; union { struct ff_constant_effect constant; struct ff_ramp_effect ramp; struct ff_periodic_effect periodic; struct ff_condition_effect condition[2]; /* One for each axis */ struct ff_rumble_effect rumble; } u; }; /* * Force feedback effect types */ #define FF_RUMBLE 0x50 #define FF_PERIODIC 0x51 #define FF_CONSTANT 0x52 #define FF_SPRING 0x53 #define FF_FRICTION 0x54 #define FF_DAMPER 0x55 #define FF_INERTIA 0x56 #define FF_RAMP 0x57 #define FF_EFFECT_MIN FF_RUMBLE #define FF_EFFECT_MAX FF_RAMP /* * Force feedback periodic effect types */ #define FF_SQUARE 0x58 #define FF_TRIANGLE 0x59 #define FF_SINE 0x5a #define FF_SAW_UP 0x5b #define FF_SAW_DOWN 0x5c #define FF_CUSTOM 0x5d #define FF_WAVEFORM_MIN FF_SQUARE #define FF_WAVEFORM_MAX FF_CUSTOM /* * Set ff device properties */ #define FF_GAIN 0x60 #define FF_AUTOCENTER 0x61 #define FF_MAX 0x7f #define FF_CNT (FF_MAX+1) #endif
Proszę o pomoc i przykład chociaż jednego klawisza jak to skonfigurować żeby działało? Np przycisku red (scan code: 0x2B key code: red) który obecnie nie jest widziany przez xev i cały system.
Offline
OK, pokażę od początku do końca jak ja to kiedyś zrobiłem (na przykładzie mojego klawisza red: 0x80B). Wtedy jeszcze nie miałem udeva, więc z niego nie skorzystałem, choć teraz pewnie byłoby prościej tak zrobić. Mój przykład ma tę zaletę, że u mnie działa :)
Nie ma znaczenia w jaki sposób wskażemy naszego pilota - można skorzystać bezpośrednio z /dev/inputX lub któregoś z podkatalogów w /dev/input:
# /lib/udev/keymap -i /dev/input/by-path/pci-0000\:05\:05.0-event-ir Press ESC to finish, or Control-C if this device is not your primary keyboard got scan code event 0x80B without a key code event ^C
Wcisnąłem przycisk red na pilocie - program poinformował mnie, że nie ma on przypisanego żadnego keycodu, a scancod wynosi 0x80B. Wychodzimy, zgodnie z opisem, za pomocą ^C - ponieważ pilot nie jest naszą główną klawiaturą :)
Teraz musimy przypisać wspomniany keycode, jednak najpierw musimy dowiedzieć się, które są wolne, żeby nie popsuć sobie klawiatury. Można to zrobić np. za pomocą polecenia
$ xmodmap -pke
Pokaże się nam obszerna lista, dla zwięzłości podam jak wygląda moje ostatnie 10 wierszy:
keycode 246 = XF86WLAN NoSymbol XF86WLAN keycode 247 = keycode 248 = keycode 249 = keycode 250 = keycode 251 = keycode 252 = keycode 253 = keycode 254 = XF86Video NoSymbol XF86Video keycode 255 =
Wypatrujemy nieprzypisanego keycodu w naszej tabeli. Wybieram sobie np. 247. Teraz małe utrudnienie: jeśli spojrzymy na początek listy, to zauważymy, że pierwszy kod ma numerek 8. Jest tak, ponieważ pierwsze 8 (0-7) numerów jest zajętych przez klawisze modyfikujące (Shift, Ctrl itp.), Jednak program setkeycodes liczy inaczej i dlatego musimy w następnym poleceniu użyć liczby o 8 mniejszej. Zatem: 247-8=239, a więc:
# setkeycodes 0x80B 239
W ten sposób przypisałem mojemu czerwonemu klawiszowi keycode 247
Teraz możemy zweryfikować, czy klawisz jest już widziany przez xev. Wciskam przycisk i:
KeyPress event, serial 40, synthetic NO, window 0x2800001, root 0x293, subw 0x0, time 2531440, (95,1), root:(141,474), state 0x10, keycode 247 (keysym 0x0, NoSymbol), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False
Teraz możemy już przypisać klawiszowi konkretną wartość np. za pomocą programu xmodmap:
$ xmodmap -e "keycode 247 = XF86_Red"
i weryfikacja w xevie:
KeyPress event, serial 37, synthetic NO, window 0x2800001, root 0x293, subw 0x0, time 2806796, (870,-259), root:(916,214), state 0x10, keycode 247 (keysym 0x1008ffa3, XF86Red), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False
Aby te ustawienia zachowały się po ponownym uruchomieniu systemu, proponuję dodać
setkeycodes 0x80B 239
do /etc/rc.local (przed "exit 0") a poniższy wiersz do pliku ~/.Xmodmap (pewnie trzeba go będzie utworzyć):
keycode 247 = XF86_Red
Nie dam sobie głowy uciąć, czy plik z tej lokalizacji jest w Debianie automatycznie czytany przy starcie systemu; gdyby tak nie było, można go wykonać np. z wspomnianego /etc/rc.local za, dopisując tam wiersz (przed "exit 0"):
xmodmap /home/$NAZWA_UŻYTKOWNIKA/.Xmodmap
Więcej grzechów nie pamiętam ;)
Offline
Bardzo naprawdę dziękuję że poświęciłeś swój cenny czas żeby mi pomóc. Zrobiłem to u siebie na przykładzie czerwonego pilota, czyli:
root@darek-PC:/home/darek# /lib/udev/keymap -i input/event13 scan code: 0x2B key code: red
Przypisałem do pierwszego wolnego pustego miejsca, u mnie było 93, czyli 85
root@darek-PC:/home/darek# setkeycodes 0x2B 85
test w xev
LeaveNotify event, serial 36, synthetic NO, window 0x6000001, root 0x15a, subw 0x0, time 15147437, (185,95), root:(1102,118), mode NotifyNormal, detail NotifyNonlinear, same_screen YES, focus YES, state 0
Następnie:
darek@darek-PC:~$ xmodmap -e "keycode 85 = XF86_Red"
i test w xev
KeyRelease event, serial 36, synthetic NO, window 0x6000001, root 0x15a, subw 0x0, time 15293988, (-669,537), root:(248,560), state 0x0, keycode 93 (keysym 0x0, NoSymbol), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False
No i teraz podsumowanie. Czy to działa? TAK i NIE. Tak bo jak naciskam przycisk red na pilocie to xev reaguje i wyświetla to co wyżej przedstawiłem, ale w praktyce to nie działa i system nie widzi mi tego klawisza red. jeśli np chce przechwycić jakiś skrót klawiaturowy przy pomocy klawisza red to dalej null nic się nie dzieje i system na niego nie reaguje. Ja już nie wiem co jest dalej źle? :(
Offline
xmodmap -e "keycode 85 = XF86_Red"
Tutaj powinien być już zwykły numerek, czyli 93 (tak jak pokazuje xev).
Inna sprawa, że... właściwie nigdy nie korzystałem z tych czterech kolorowych, telegazetowych przycisków w żadnym programie. Jak teraz sprawdziłem, próbując przypisać temu przyciskowi jakąś akcję w Ustawieniach systemowych KDE, pojawia mi się komunikat, że klawisz ten nie jest obsługiwany przez KDE. Gdy przypisałem mu za pomocą xmodmap inne znaczenie - XF86_Launch0 (wyglądało dość bezpiecznie) udało się przypisać akcję bez problemu, także jest tu pewne pole do eksperymentów.
Natomiast wszystkie inne klawisze na pilocie, takie jak play (XF86_AudioPlay), record (XF86_AudioRecord), fwd/rev, strzałki, głośność, góra/dół, mute itp. w większości programów działają nawet bez konieczności przypisywania dodatkowych skrótów, więc sugeruję zacząć od któregoś z nich. I jeszcze dla porządku - nazwy klawiszy bierzemy z [url=http://forum.dug.net.pl/viewtopic.php?pid=211746#p211746]tego pliku[/url] zamieniając początkowe XF86XK na XF86.
PS Mam wrażenie, że konfiguracja lirca mogła okazać się znacznie prostsza :|
Offline
Super ok, wygląda na to że działa teraz, zobaczę jak to będzie po restarcie systemu czy mi zapamięta te ustawienia w pliku .xmodmap. Jeszcze co do tych np przycisków z kolorami np przycisk red, hmm ale dlaczego system miałby go nie widzieć, skoro w pliku XF86keysym.h są zdefiniowane
#define XF86XK_Red 0x1008FFA3 /* Red button */ #define XF86XK_Green 0x1008FFA4 /* Green button */ #define XF86XK_Yellow 0x1008FFA5 /* Yellow button */ #define XF86XK_Blue 0x1008FFA6 /* Blue button */
Więc teoretycznie do przycisku red mogę sobie wybrać akcję jaka mi się podoba.
PS. No ja myślę że lirc jest gorszy w obsłudze bo mam go też skonfigurowanego, ale żadnego pożytku z niego bo dla każdej aplikacji trzeba wpisy robić w pliku .lircrc i też się z tym męczyłem i nic mi nie działa, a tak mogę otworzyć konfigurację każdej aplikacji i przechwycić dla dowolnej akcji dany przycisk pilota.
Offline
Strony: 1
Time (s) | Query |
---|---|
0.00008 | SET CHARSET latin2 |
0.00005 | SET NAMES latin2 |
0.00098 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.16.76.102' WHERE u.id=1 |
0.00064 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.16.76.102', 1732951589) |
0.00043 | SELECT * FROM punbb_online WHERE logged<1732951289 |
0.00047 | SELECT topic_id FROM punbb_posts WHERE id=211541 |
0.00006 | SELECT id FROM punbb_posts WHERE topic_id=22029 ORDER BY posted |
0.00045 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=22029 AND t.moved_to IS NULL |
0.00008 | SELECT search_for, replace_with FROM punbb_censoring |
0.00153 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=22029 ORDER BY p.id LIMIT 0,25 |
0.00079 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=22029 |
Total query time: 0.00556 s |