Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: ◀ 1 … 6 7 8 9 10 … 14 ▶

 

#176  2012-07-01 20:21:41

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

[quote=numer_inaczej]Panowie - działa. Wystarczyło tylko wyciągnąć i ponownie włożyć Tuner do USB.[/quote]
Trzeba by się bliżej przyjrzeć  modułom od tej karty.
I jak tam się tworzą urządzenia w /dev

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#177  2012-07-03 20:34:49

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: DVB-T - doświadczenia,uwagi itd

wydaje mi się, że to sprawa sprzętowa jednak. Tuner mam podłączony przez podwójny rozdzielacz, tzn. z jednego rozdzialacza (monitora) mam poprowadzony drugi w którym podłączam tuner. Ponieważ monitor mam przez cały czas włączony nie tracę zasilania i tuner się nie restartuje.
Pomaga chwilowe wyłączenie monitora i ponowne jego włączenie. Wiem - pokręcone to jest. Jedno problem jest wówczas gdy przechodzę z Windowsa na Gentoo, odwrotnie lub też z Gentoo na Gentoo - nie występuje.

Ale jeśli by się dało coś z tym zrobić to chętnie się za to zabiorę.
Jakie info dotyczące modułów jest potrzebne?

dmesg po wyjęciu i wpięciu tunera:

Kod:

usb 1-5.1.3: new high-speed USB device number 16 using ehci_hcd
usb 1-5.1.3: New USB device found, idVendor=2304, idProduct=023d
usb 1-5.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1.3: Product: PCTV 340e
usb 1-5.1.3: Manufacturer: YUANRD
usb 1-5.1.3: SerialNumber: 0901102C8E
dvb-usb: found a 'Pinnacle PCTV 340e HD Pro USB Stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Pinnacle PCTV 340e HD Pro USB Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Pinnacle PCTV 340e HD Pro USB Stick)
scsi 4:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
xc4000 6-0061: creating new instance
xc4000: Successfully identified at address 0x61
xc4000: Firmware has not been loaded previously
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1.3/rc/rc2/input8
rc2: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1.3/rc/rc2
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Pinnacle PCTV 340e HD Pro USB Stick successfully initialized and connected.

ls /dev/dvb/adapter0:

Kod:

crw-rw----+ 1 root video 212, 0 07-03 20:32 demux0
crw-rw----+ 1 root video 212, 1 07-03 20:32 dvr0
crw-rw----+ 1 root video 212, 3 07-03 20:32 frontend0
crw-rw----+ 1 root video 212, 2 07-03 20:32 net0

Gdy restartuję komputer nie jest tworzone frontend0 - wnioskuję, że nie czyta mi firmware od tunera.

Ostatnio edytowany przez numer_inaczej (2012-07-03 20:38:37)

Offline

 

#178  2012-07-03 21:16:22

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

Zobacz czy masz ten pliczek w /lib/firmware

[b] dvb-usb-dib0700-1.20.fw[/b]

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#179  2012-07-03 21:53:48

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: DVB-T - doświadczenia,uwagi itd

Tak-mam ten plik.

Offline

 

#180  2012-07-04 08:10:35

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

Zobacz do dmesg  po tym jak nie działa.
Czym się różnią.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#181  2012-07-05 18:43:04

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: DVB-T - doświadczenia,uwagi itd

Wklajem fragment dmesg który się wg mnie różni:

Kod:

usb 1-5.1.3: new high-speed USB device number 8 using ehci_hcd
usb 1-5.1.3: New USB device found, idVendor=2304, idProduct=023d
usb 1-5.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1.3: Product: PCTV 340e
usb 1-5.1.3: Manufacturer: YUANRD
usb 1-5.1.3: SerialNumber: 0901102C8E
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
lirc_dev: IR Remote Control driver registered, major 249 
IR LIRC bridge handler initialized
dvb-usb: found a 'Pinnacle PCTV 340e HD Pro USB Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Pinnacle PCTV 340e HD Pro USB Stick)
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-5.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  295.59  Wed Jun  6 21:19:40 PDT 2012
dvb-usb: no frontend was attached by 'Pinnacle PCTV 340e HD Pro USB Stick'
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1.3/rc/rc0/input6
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1.3/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Pinnacle PCTV 340e HD Pro USB Stick successfully initialized and connected.
dib0700: rc submit urb failed
usbcore: registered new interface driver dvb_usb_dib0700

w ogóle nie mam fragmentu dotyczącego firmware xc4000

dla pewności wkleję cały dmesg:

Kod:

Linux version 3.3.8-gentoo (root@gentoo) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #15 SMP PREEMPT Sun Jul 1 12:45:21 CEST 2012
Command line: root=/dev/sda10 max_loop=64 acpi=on reboot=b ro quiet video=uvesafb:1280x1024-24@60,ywrap,mtrr:3 splash=silent,theme:natural_gentoo console=tty1 
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
 BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
 BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
 BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P31-DS3L/P31-DS3L, BIOS F9 07/10/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CCFFF write-protect
  CD000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07FF00000 mask FFFF00000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f4ec0] f4ec0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000007fee0000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007fee0000 page 4k
kernel direct mapping tables up to 7fee0000 @ 1fffc000-20000000
RAMDISK: 37f8c000 - 37ff0000
ACPI: RSDP 00000000000f6890 00014 (v00 GBT   )
ACPI: RSDT 000000007fee3040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 000000007fee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 000000007fee3180 03957 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 000000007fee0000 00040
ACPI: HPET 000000007fee6c40 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 000000007fee6cc0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 000000007fee6b40 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 000000007fee7360 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fee0000
Initmem setup node 0 0000000000000000-000000007fee0000
  NODE_DATA [000000007fedb000 - 000000007fedffff]
 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
Early memory PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007fee0
On node 0 totalpages: 523887
  DMA zone: 56 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3922 pages, LIFO batch:0
  DMA32 zone: 7109 pages used for memmap
  DMA32 zone: 512795 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
4 Processors exceeds NR_CPUS limit of 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s71680 r8192 d22528 u1048576
pcpu-alloc: s71680 r8192 d22528 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516717
Policy zone: DMA32
Kernel command line: root=/dev/sda10 max_loop=64 acpi=on reboot=b ro quiet video=uvesafb:1280x1024-24@60,ywrap,mtrr:3 splash=silent,theme:natural_gentoo console=tty1 
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Memory: 2059308k/2096000k available (3865k kernel code, 452k absent, 36240k reserved, 1857k data, 560k init)
Preemptible hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512 16
Console: colour VGA+ 80x25
console [tty1] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2933.330 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.66 BogoMIPS (lpj=11733320)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120111
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Booting Node   0, Processors  #1 Ok.
smpboot cpu 1: start_ip = 9a000
Brought up 2 CPUs
Total of 2 processors activated (11733.32 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 7fee0000 (12288 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007fee6d40 0026C (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0026C (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 000000007fee7200 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0xe300-0xe31f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0xe000-0xe01f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0xe100-0xe11f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0xe200-0xe21f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfa000000-0xfa0003ff]
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io  0xf000-0xf00f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:01:00.0: [10de:05e3] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xb000-0xb07f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:03:00.0: [10b5:8112] type 1 class 0x000604
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03-04]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:04:04.0: [13f6:8788] type 0 class 0x000401
pci 0000:04:04.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:04:04.0: supports D1 D2
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0:   bridge window [io  0xc000-0xcfff]
pci 0000:05:02.0: [8086:1229] type 0 class 0x000200
pci 0000:05:02.0: reg 10: [mem 0xf9100000-0xf9100fff]
pci 0000:05:02.0: reg 14: [io  0xd000-0xd03f]
pci 0000:05:02.0: reg 18: [mem 0xf9000000-0xf90fffff]
pci 0000:05:02.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:05:02.0: supports D1 D2
pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 000000007fee0000 - 000000007fffffff 
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0290-0x029f]
pnp 00:01: [io  0x0800-0x087f]
pnp 00:01: [io  0x0290-0x0294]
pnp 00:01: [io  0x0880-0x088f]
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0080-0x0090]
pnp 00:02: [io  0x0094-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f0-0x03f5]
pnp 00:07: [io  0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x0378-0x037f]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [io  0x0400-0x04bf]
system 00:0a: [io  0x0400-0x04bf] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x000d1000-0x000d3fff]
pnp 00:0c: [mem 0x000f0000-0x000f7fff]
pnp 00:0c: [mem 0x000f8000-0x000fbfff]
pnp 00:0c: [mem 0x000fc000-0x000fffff]
pnp 00:0c: [mem 0x7fee0000-0x7fefffff]
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x00100000-0x7fedffff]
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfed13000-0xfed1dfff]
pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
pnp 00:0c: [mem 0xfff00000-0xffffffff]
pnp 00:0c: [mem 0x000e0000-0x000effff]
pnp 00:0c: disabling [mem 0x000d1000-0x000d3fff] because it overlaps 0000:05:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:05:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:05:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:05:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:05:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:0c: disabling [mem 0x000e0000-0x000effff] because it overlaps 0000:05:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
system 00:0c: [mem 0x7fee0000-0x7fefffff] could not be reserved
system 00:0c: [mem 0x00100000-0x7fedffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: [mem 0xffb80000-0xffbfffff]
pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1e.0: BAR 9: assigned [mem 0x7ff00000-0x7fffffff pref]
pci 0000:00:1c.1: BAR 8: assigned [mem 0x80000000-0x801fffff]
pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.0: BAR 8: assigned [mem 0x80400000-0x805fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf707ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.0:   bridge window [mem 0x80400000-0x805fffff]
pci 0000:00:1c.0:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1: PCI bridge to [bus 03-04]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0x80000000-0x801fffff]
pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:05:02.0: BAR 6: assigned [mem 0x7ff00000-0x7fffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1e.0:   bridge window [mem 0x7ff00000-0x7fffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0x80400000-0x805fffff]
pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 [mem 0x7ff00000-0x7fffffff pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
pci 0000:05:02.0: Firmware left e100 interrupts enabled; disabling
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 400k freed
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Intel AES-NI instructions are not detected.
audit: initializing netlink socket (disabled)
type=2000 audit(1341513034.136:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.18)
msgmni has been set to 4022
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
uvesafb: NVIDIA Corporation, BIOS-P/N@N4645:0, GW-CLK@\xffffffda\x04\xffffff88\x02\xffffffda\x04\xffffff88\x02F\x05\xffffffee\x02, OEM: NVIDIA, VBE v3.0
Refined TSC clocksource calibration: 2933.333 MHz.
Switching to clocksource tsc
uvesafb: VBIOS/hardware doesn't support DDC transfers
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: redraw
Console: switching to colour frame buffer device 160x64
uvesafb: framebuffer at 0xf5000000, mapped to 0xffffc90004980000, using 14336k, total 14336k
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ioatdma: Intel(R) QuickData Technology Driver 4.00
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
fbcondecor: console 0 using theme 'natural_gentoo'
loop: module loaded
st: Version 20101219, fixed bufsize 32768, s/g segs 256
SCSI Media Changer driver v0.25 
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
fbcondecor: switched decor state to 'on' on console 0
e100 0000:05:02.0: eth0: addr 0xf9100000, irq 18, MAC addr 00:02:b3:26:9c:e3
usbcore: registered new interface driver hwa-rc
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.3.8-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.3.8-gentoo uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.3.8-gentoo uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.3.8-gentoo uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.3.8-gentoo uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver hwa-hc
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbtmc
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
i2c /dev entries driver
it87: Found IT8718F chip at 0x290, revision 5
it87: Beeping is supported
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
  No soundcards found.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
ata2.00: ATAPI: BENQ    DVD DD DW1650, BCDC, max UDMA/33
ata1.00: HPA detected: current 625140335, native 625142448
ata1.00: ATA-7: SAMSUNG HD322IJ, 1AC01113, max UDMA7
ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD322IJ  1AC0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            BENQ     DVD DD DW1650    BCDC PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
sd 0:0:0:0: [sda] Attached SCSI disk
registered taskstats version 1
console [netcon0] enabled
netconsole: network logging started
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
EXT4-fs (sda10): couldn't mount as ext2 due to feature incompatibilities
usb 1-5: new high-speed USB device number 2 using ehci_hcd
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:10.
devtmpfs: mounted
Freeing unused kernel memory: 560k freed
usb 1-5: New USB device found, idVendor=0424, idProduct=2504
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 4-2: new low-speed USB device number 2 using uhci_hcd
usb 4-2: New USB device found, idVendor=046d, idProduct=c046
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Optical Mouse
usb 4-2: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
generic-usb 0003:046D:C046.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 5-1: new low-speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=046d, idProduct=c21a
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Logitech(R) Precision(TM) Gamepad
usb 5-1: Manufacturer: Logitech
input: Logitech Logitech(R) Precision(TM) Gamepad as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4
generic-usb 0003:046D:C21A.0002: input,hidraw1: USB HID v1.10 Joystick [Logitech Logitech(R) Precision(TM) Gamepad] on usb-0000:00:1d.3-1/input0
usb 5-2: new low-speed USB device number 3 using uhci_hcd
usb 5-2: New USB device found, idVendor=413c, idProduct=2106
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Dell QuietKey Keyboard
usb 5-2: Manufacturer: DELL
input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input5
generic-usb 0003:413C:2106.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1d.3-2/input0
usb 1-5.1: new high-speed USB device number 6 using ehci_hcd
usb 1-5.1: New USB device found, idVendor=058f, idProduct=6254
usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5.1:1.0: USB hub found
hub 1-5.1:1.0: 4 ports detected
udevd[1495]: starting version 171
usb 1-5.3: new high-speed USB device number 7 using ehci_hcd
usb 1-5.3: New USB device found, idVendor=13fe, idProduct=3623
usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.3: Product: STORE N GO
usb 1-5.3: Manufacturer: Verbatim
usb 1-5.3: SerialNumber: 079A19092976986E
usb 1-5.1.3: new high-speed USB device number 8 using ehci_hcd
usb 1-5.1.3: New USB device found, idVendor=2304, idProduct=023d
usb 1-5.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1.3: Product: PCTV 340e
usb 1-5.1.3: Manufacturer: YUANRD
usb 1-5.1.3: SerialNumber: 0901102C8E
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
lirc_dev: IR Remote Control driver registered, major 249 
IR LIRC bridge handler initialized
dvb-usb: found a 'Pinnacle PCTV 340e HD Pro USB Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Pinnacle PCTV 340e HD Pro USB Stick)
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-5.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  295.59  Wed Jun  6 21:19:40 PDT 2012
dvb-usb: no frontend was attached by 'Pinnacle PCTV 340e HD Pro USB Stick'
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1.3/rc/rc0/input6
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1.3/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Pinnacle PCTV 340e HD Pro USB Stick successfully initialized and connected.
dib0700: rc submit urb failed

usbcore: registered new interface driver dvb_usb_dib0700
scsi 2:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda10): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda10): re-mounted. Opts: (null)
dd: sending ioctl 80306d02 to a partition!
dd: sending ioctl 80306d02 to a partition!
EXT4-fs (sda11): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda12): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda13): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda14): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: (null)
fbcondecor: console 1 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 5
fbcondecor: console 6 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 6
fbcondecor: console 7 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 7
fbcondecor: console 8 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 8
fbcondecor: console 9 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 9
fbcondecor: console 10 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 10
fbcondecor: console 11 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 11
Adding 1052220k swap on /dev/sda8.  Priority:-1 extents:1 across:1052220k 
e100 0000:05:02.0: eth0: NIC Link is Up 100 Mbps Full Duplex
INPUT DROPIN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:5c:9a:d8:5c:65:c2:08:00 SRC=10.14.120.135 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=2355 PROTO=UDP SPT=68 DPT=67 LEN=308 
fbcondecor: switched decor state to 'off' on console 6
fbcondecor: console 6 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 6
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized

Ostatnio edytowany przez numer_inaczej (2012-07-05 18:48:03)

Offline

 

#182  2012-07-05 19:27:42

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

Na jakim module chodzi ta karta ?

Zobacz modinfo tego modulu.
Moze trzeba mu dopisac jakieś parametry aby definiować zawsze ten własnie rodzaj karty

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#183  2012-07-05 20:44:34

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: DVB-T - doświadczenia,uwagi itd

modinfo xc4000:

Kod:

filename:       /lib/modules/3.3.8-gentoo/kernel/drivers/media/common/tuners/xc4000.ko
license:        GPL
description:    Xceive xc4000 silicon tuner driver
author:         Steven Toth, Davide Ferri
depends:        
intree:         Y
vermagic:       3.3.8-gentoo SMP preempt mod_unload 
parm:           debug:Debugging level (0 to 2, default: 0 (off)). (int)
parm:           no_poweroff:Power management (1: disabled, 2: enabled, 0 (default): use device-specific default mode). (int)
parm:           audio_std:Audio standard. XC4000 audio decoder explicitly needs to know what audio standard is needed for some video standards with audio A2 or NICAM. The valid settings are a sum of:
 1: use NICAM/B or A2/B instead of NICAM/A or A2/A
 2: use A2 instead of NICAM or BTSC
 4: use SECAM/K3 instead of K1
 8: use PAL-D/K audio for SECAM-D/K
16: use FM radio input 1 instead of input 2
32: use mono audio (the lower three bits are ignored) (int)
parm:           firmware_name:Firmware file name. Allows overriding the default firmware name. (string)

uruchomiony z poniższymi parametrami nie staje się bardziej rozmowny:
modprobe xc4000 debug=2
Zaś modinfo dvb-usb-dib0700 daje wyjście które mi nic nie mówi:

Kod:

filename:       /lib/modules/3.3.8-gentoo/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.ko
license:        GPL
version:        1.0
description:    Driver for devices based on DiBcom DiB0700 - USB bridge
author:         Patrick Boettcher <pboettcher@dibcom.fr>
firmware:       dvb-usb-dib0700-1.20.fw
srcversion:     E25F7E1D680531C70069733
alias:          usb:v10B8p1F9Cd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1E6Ed*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1BB7d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p023Ed*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p023Dd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1660p1921d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v14F7p0004d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1BB4d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1BB2d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p2384d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1FA8d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p2383d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0FD9p0011d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1FA0d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p0248d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p0245d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1E59p0002d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1554p5010d[0-2]*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1554p5010d3[0-9a-0]*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1554p5010d3F00dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1F90d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1F98d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp00ABd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1E80d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2013p0248d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2013p0245d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p0243d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1164p1E8Cd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1164p1EFCd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp10A1d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp10A0d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0413p60F6d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0FD9p0020d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0FD9p0021d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1164p0871d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040pB210d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040pB200d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1164p2EDCd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1415p0003d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp0081d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp0062d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p023Bd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p023Ad*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0B05p1736d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1164p1F08d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1044p7002d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p8400d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p5200d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0413p6F01d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp0078d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp0060d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1164p1EDCd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p0237d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p0236d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p022Ed*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp0058d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p7080d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p7070d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0B05p173Fd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0B05p171Fd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v05D8p810Fd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1044p7001d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07CApB568d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v185Bp1E80d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p0229d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1EBEd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p0228d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1EBCd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1EF0d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p9580d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CCDp005Ad*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2304p022Cd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07CApB808d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p7060d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0413p6F00d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1584p6003d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v185Bp1E78d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07CApA807d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p7050d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p9950d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2040p9941d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1E78d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v10B8p1E14d*dc*dsc*dp*ic*isc*ip*
depends:        dib7000m,dib7000p,dib8000,dibx000_common,dvb-usb,dib0090,dib0070,dib3000mc,rc-core
intree:         Y
vermagic:       3.3.8-gentoo SMP preempt mod_unload 
parm:           force_lna_activation:force the activation of Low-Noise-Amplifyer(s) (LNA), if applicable for the device (default: 0=automatic/off). (int)
parm:           debug:set debugging level (1=info,2=fw,4=fwdata,8=data (or-able)). (debugging is not enabled) (int)
parm:           nb_packet_buffer_size:Set the dib0700 driver data buffer size. This parameter corresponds to the number of TS packets. The actual size of the data buffer corresponds to this parameter multiplied by 188 (default: 21) (int)
parm:           adapter_nr:DVB adapter numbers (array of short)

Tak na marginesie znalazłem fajną [url=http://wiki.ubuntuusers.de/VLC]stronę[/url] o odpalaniu VLC z palca na wybranym kanale. Może komuś się przyda.

Offline

 

#184  2012-07-05 21:04:41

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

Porównaj jeszcze jakie moduły są zaladowane wtedy jak dziala i jak nie działa.

Może to być sprawa kernela 3.3 bo tutaj jest podobny bład w dmesg choć inne objawy.

Kod:

dib0700: rc submit urb failed

http://openpli.org/forums/topic/23380-kernel-33-problem-with-dual-tuner-hauppauge-wintv-nova-td/

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#185  2012-07-05 21:49:17

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: DVB-T - doświadczenia,uwagi itd

Różnią się tylko oba modułem xc4000.
Poniżej lsmod z załadowanym modułem. Kiedy jednak nie działa a załaduję go ręcznie to nic się nie dzieje - poza jego załadowaniem nie wczytuje firmware.
Za słabo znam angielski by prześledzić wskazany przez Ciebie wątek. O co tam chodzi tak w skrócie?

Kod:

Module                  Size  Used by
xc4000                 16020  1 
bluetooth             134903  2 
iptable_nat             2896  0 
nf_nat                 12036  1 iptable_nat
iptable_raw             1015  0 
ipt_LOG                 6058  1 
xt_limit                1646  1 
xt_state                1087  3 
xt_TCPMSS               2139  1 
snd_seq_dummy           1191  0 
snd_seq_oss            22491  0 
snd_seq_midi_event      4524  1 snd_seq_oss
snd_seq                39506  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            31154  0 
snd_mixer_oss          12030  1 snd_pcm_oss
rc_dib0700_rc5          2188  0 
dvb_usb_dib0700       128578  0 
dib0090                20222  1 dvb_usb_dib0700
dib7000p               23078  2 dvb_usb_dib0700
dib7000m               12638  1 dvb_usb_dib0700
dib0070                 6671  1 dvb_usb_dib0700
dvb_usb                13992  1 dvb_usb_dib0700
dib8000                33885  1 dvb_usb_dib0700
nvidia              12274639  30 
ir_lirc_codec           3435  0 
lirc_dev                7647  1 ir_lirc_codec
dvb_core               76453  3 dib7000p,dvb_usb,dib8000
dib3000mc               9527  1 dvb_usb_dib0700
rc_core                10477  5 rc_dib0700_rc5,dvb_usb_dib0700,dvb_usb,ir_lirc_codec
dibx000_common          5714  5 dvb_usb_dib0700,dib7000p,dib7000m,dib8000,dib3000mc
snd_virtuoso           28271  3 
snd_oxygen_lib         25340  1 snd_virtuoso
snd_pcm                60336  3 snd_pcm_oss,snd_oxygen_lib
snd_timer              15409  2 snd_seq,snd_pcm
rtc_cmos                7570  0 
snd_page_alloc          5729  1 snd_pcm
snd_mpu401_uart         4795  1 snd_oxygen_lib
snd_rawmidi            14840  1 snd_mpu401_uart
snd_seq_device          4353  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
usb_storage            31971  0

Offline

 

#186  2012-07-05 22:03:02

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

Jak rozumiem jak nie działa to nie ładuje się ten moduł xc4000.

Spróbuj dopisać go do /etc/modules (nie wiem co jest w gentoo odpowiednikiem)  ,żeby się zawsze ładował.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#187  2012-07-05 23:32:11

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: DVB-T - doświadczenia,uwagi itd

dopisałem go do /etc/conf.d/modules - moduł został załadowany przy starcie systemu bez jakiegokolwiek komentarza w dmesg. Nadal nie tworzy /dev/dvb/adapter0/frontend0

Offline

 

#188  2012-07-05 23:42:52

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: DVB-T - doświadczenia,uwagi itd

Tak na marginesie znalazłem fajną stronę o odpalaniu VLC z palca na wybranym kanale. Może komuś się przyda.[/quote]

Kod:

vlc ~/.mplayer/channels.conf

Ja odpalam tak, i na liście ostwarzania mam do wyboru kanały. ;)

Ostatnio edytowany przez Jacekalex (2012-07-05 23:43:09)

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#189  2012-07-06 08:55:15

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

Spróbuj może zrestartować udev.
On chyba odpowiada za ładowanie firmware.

W debianie to wygląda tak

Kod:

/etc/init.d/udev restart
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#190  2012-07-06 19:01:00

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: DVB-T - doświadczenia,uwagi itd

Niestety - i to nie pomaga. Nadal nie tworzy frontend0.

Panowie - jak jest lepiej korzystać z VLV - jak w przypadku mplayera z linii komend, czy zapisać konfigurację w gui?

Ostatnio edytowany przez numer_inaczej (2012-07-06 19:11:05)

Offline

 

#191  2012-07-06 19:23:39

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

Chyba chodzi Ci o vlc :)

Ja jak używałem vlc  to zrpbiłem sobie aktywator z poleceniem

Kod:

vlc /scieżka/channels.conf

Potem na liście odtwarzania mogłem sobie wybierac jaki program chcę oglądać.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#192  2012-10-20 13:09:04

  milyges - inż.

milyges
inż.
Skąd: Gorlice/Kraków
Zarejestrowany: 2006-04-09
Serwis

Re: DVB-T - doświadczenia,uwagi itd

Ok to ja się pochwale :)
Kupiłem w piątek kartę Medion CTX 953_V1 na chipie philipsa:

Kod:

05:00.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)

Po zakupieniu 10m kabla antenowego, wtyczki i 2m druta o przekroju 1.5mm^2, wygięciu biquada bez ekranu i wystawieniu go za okno ok kopa mam:

Kod:

TVP1 HD(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:102:104:1
TVP INFO Kraków(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:1302:1304:13
ESKA TV(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:302:303:27
TTV(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:402:404:28
POLO TV(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:502:503:29
ATM Rozrywka TV(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:602:603:30
TVP2(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:202:208:45
TVP Seriale(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:202:302:102
Polsat Sport(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:203:303:103
Polsat Film(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:204:304:104
Comedy Central(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:205:305:105
Polsat Sport Extra(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:208:308:108
Polsat News(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:212:312:112
TVP Seriale(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:213:313:113
Polsat Sport(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:214:314:114
Polsat Film(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:215:315:115
Comedy Central(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:216:316:116
Kino Polska(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:218:318:118
Polsat Sport Extra(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:219:319:119
Nickelodeon(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:206:306:106
Nickelodeon(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:217:317:117
Polsat(Cyfrowy Polsat S.A.):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:220:320:120
TV Puls(Cyfrowy Polsat S.A):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:221:321:121
TV4(Cyfrowy Polsat S.A.):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:222:322:122
TVP1(Cyfrowy Polsat S.A):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:223:323:123
TVP2(Cyfrowy Polsat S.A.):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:224:324:124
TVN(Info TV FM):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:225:325:125
Kino Polska(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:207:307:107
Polsat News(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:201:301:101
Polsat News(Cyfrowy Polsat):674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:201:301:109
Polsat(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:102:103:3
TVN(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:202:204:4
TV4(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:302:303:5
TV Puls(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:402:403:6
TVN Siedem(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:502:504:23
PULS 2(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:602:603:24
TV6(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:702:703:25
Polsat Sport News(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:802:803:26

Bez wgrywania firmware, etc. etc. po skompilowaniu modułu (Gentoo), od kopa wszystko ruszyło :)
Uważam wydanie 35zł na tą kartę jako dobrą inwestycje :)

BTW.: Macie jakieś sprawdzone konstrukcje anten/uchwytów do nich?
Pozdrawiam.

//EDIT: Mam 10km do nadajnika, ale w drugą strone niż okno, mieszkam w Krakowie ;)

[url=http://mhroczny.net][b]strona domowa[/b][/url] || [url=http://dug.net.pl][b]polski portal debiana[/b][/url]

Offline

 

#193  2012-10-20 13:13:02

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

TVP Seriale(Cyfrowy Polsat)[/quote]
To Ci działa ?

To jest chyba kodowane.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#194  2012-10-20 14:44:35

  milyges - inż.

milyges
inż.
Skąd: Gorlice/Kraków
Zarejestrowany: 2006-04-09
Serwis

Re: DVB-T - doświadczenia,uwagi itd

To tylko znalazło ;) Nie dziala :P

[url=http://mhroczny.net][b]strona domowa[/b][/url] || [url=http://dug.net.pl][b]polski portal debiana[/b][/url]

Offline

 

#195  2012-10-23 20:52:49

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: DVB-T - doświadczenia,uwagi itd

Dla Krakowa Chorągwicy

Kod:

TVP1 HD(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:102:104:1
TVP INFO Poznan(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:1802:1804:18
ESKA TV(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:302:303:27
TTV(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:402:404:28
POLO TV(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:502:503:29
ATM Rozrywka TV(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:602:603:30
TVP2(EmiTel):506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:202:208:45
Polsat(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:102:103:3
TVN(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:202:204:4
TV4(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:302:303:5
TV Puls(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:402:403:6
TVN Siedem(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:502:504:23
PULS 2(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:602:603:24
TV6(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:702:703:25
Polsat Sport News(EmiTel):818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE:802:803:26

Dwa MUXY

Odpalasz

Kod:

vlc channels.conf

Jęsli na drugi mux nie będzie łapalo to musisz kombinować z anteną.

Za słaby sygnał pewnie masz.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#196  2012-10-24 08:35:36

  radziojedi - Gambini

radziojedi
Gambini
Skąd: Śrem
Zarejestrowany: 2008-08-08

Re: DVB-T - doświadczenia,uwagi itd

Wszystkie kanały z dodatkiem "Cyfrowy Polsat" są kanałami kodowanymi. Jedyna możliwość ich odbioru przez dedykowane urządzenia oraz oprogramowanie Cyfrowego Polsatu. Ich dekodery są parowane z kartami, także nawet wykorzystując zewnętrzny programator nie da rady.

"Given enough eyeballs, all bugs are shallow"
Eric Raymond, The Cathedral and the Bazaar: Musings on Linux and Open Source by an Accidental Revolutionary

Offline

 

#197  2012-10-24 09:05:49

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: DVB-T - doświadczenia,uwagi itd

Bez przesady.
Pewnie prędzej czy później znajdzie się  sposób, żeby to dziadostwo oglądać w Xbmc.

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#198  2012-10-24 11:43:44

  radziojedi - Gambini

radziojedi
Gambini
Skąd: Śrem
Zarejestrowany: 2008-08-08

Re: DVB-T - doświadczenia,uwagi itd

Wiesz... tak samo parowane są karty Cyfrowe Polsatu, N czy też TNK HD z kanałami odbieranymi drogą satelitarną. Od kilku (nastu) lat nie dano temu rady. Nie sądzę, aby zbyt szybko udało się rozwiązać tutaj ten problem, ale... nigdy nie mów nigdy:)

"Given enough eyeballs, all bugs are shallow"
Eric Raymond, The Cathedral and the Bazaar: Musings on Linux and Open Source by an Accidental Revolutionary

Offline

 

#199  2012-11-02 16:47:48

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: DVB-T - doświadczenia,uwagi itd

Da się w smplayer2 zaprogramować listę kanałów z dvb-t? Pytam czysto teoretycznie, nawet karty nie mam jeszcze.

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

 

#200  2012-11-02 17:13:54

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: DVB-T - doświadczenia,uwagi itd

Chodzi o to:
http://forum.dug.net.pl/viewtopic.php?pid=171244#p171244
?

Offline

 

 

Strony: ◀ 1 … 6 7 8 9 10 … 14 ▶

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.027 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00010 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00078 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.188.183.21' WHERE u.id=1
0.00076 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.188.183.21', 1732497419)
0.00062 SELECT * FROM punbb_online WHERE logged<1732497119
0.00051 SELECT topic_id FROM punbb_posts WHERE id=213270
0.00012 SELECT id FROM punbb_posts WHERE topic_id=18316 ORDER BY posted
0.00077 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=18316 AND t.moved_to IS NULL
0.00006 SELECT search_for, replace_with FROM punbb_censoring
0.01860 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=18316 ORDER BY p.id LIMIT 175,25
0.00093 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=18316
Total query time: 0.02329 s