Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2013-08-04 18:35:14

  tipsntrix - Użytkownik

tipsntrix
Użytkownik
Zarejestrowany: 2013-02-02

problem z portami ethrnet

Witam,
Proszę o pomoc w rozwikłaniu zagadki nie działających portów ethernet w moim serwerku.
Zostają wykryte i przypisane do eth0, eth1....eth5, natomiast nie widać ich w systemie, ifconfig eth0 up nie pomaga , w dmesg  mam jakiś konflikt , ale nie bardzo wiem jak sobie z tym poradzić.

Kod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 01:04:36 UTC 2013
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[    0.000000]  BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FF0000000 write-back
[    0.000000]   1 base 010000000 mask FFFF80000 write-back
[    0.000000]   2 base 010000000 mask FFFF7F000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0010000000 page 2M
[    0.000000] kernel direct mapping tables up to 10000000 @ 10000-15000
[    0.000000] RAMDISK: 0b7eb000 - 0c03f394
[    0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 256MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 10000000
[    0.000000]   low ram: 0 - 10000000
[    0.000000]   node 0 low ram: 00000000 - 10000000
[    0.000000]   node 0 bootmap 00011000 - 00013000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0010000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00014ced2c]    TEXT DATA BSS ==> [0001000000 - 00014ced2c]
[    0.000000]   #4 [000b7eb000 - 000c03f394]          RAMDISK ==> [000b7eb000 - 000c03f394]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00014cf000 - 00014d5294]              BRK ==> [00014cf000 - 00014d5294]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000013000]          BOOTMAP ==> [0000011000 - 0000013000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00010000
[    0.000000]   HighMem  0x00010000 -> 0x00010000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00010000
[    0.000000] On node 0 totalpages: 65423
[    0.000000] free_area_init_node: node 0, pgdat c13b6900, node_mem_map c14d7200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 480 pages used for memmap
[    0.000000]   Normal zone: 60960 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:effe0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34360 r0 d22984 u4194304
[    0.000000] pcpu-alloc: s34360 r0 d22984 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64911
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=4ca8144e-d40d-4d5e-985c-f276145ebf40 ro quiet
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 245544k/262144k available (2509k kernel code, 15824k reserved, 1331k data, 380k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd56000 - 0xfffff000   (2724 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff3fe000   ( 747 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]       .init : 0xc13c1000 - 0xc1420000   ( 380 kB)
[    0.000000]       .data : 0xc12735eb - 0xc13c0504   (1331 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12735eb   (2509 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1202.860 MHz processor.
[    0.008013] Calibrating delay loop (skipped), value calculated using timer frequency.. 2405.72 BogoMIPS (lpj=4811440)
[    0.008061] Security Framework initialized
[    0.008081] SELinux:  Disabled at boot.
[    0.008099] Mount-cache hash table entries: 512
[    0.008428] Initializing cgroup subsys ns
[    0.008440] Initializing cgroup subsys cpuacct
[    0.008448] Initializing cgroup subsys devices
[    0.008454] Initializing cgroup subsys freezer
[    0.008460] Initializing cgroup subsys net_cls
[    0.008524] CPU: L1 I cache: 16K, L1 D cache: 16K
[    0.008529] CPU: L2 cache: 256K
[    0.008542] mce: CPU supports 5 MCE banks
[    0.008582] Performance Events:
[    0.008588] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.008592] no hardware sampling interrupt available.
[    0.008596] p6 PMU driver.
[    0.008610] ... version:                0
[    0.008614] ... bit width:              32
[    0.008617] ... generic registers:      2
[    0.008622] ... value mask:             00000000ffffffff
[    0.008626] ... max period:             000000007fffffff
[    0.008630] ... fixed-purpose events:   0
[    0.008634] ... event mask:             0000000000000003
[    0.008645] Checking 'hlt' instruction... OK.
[    0.024604] SMP alternatives: switching to UP code
[    0.030120] Freeing SMP alternatives: 13k freed
[    0.030351] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.030360] weird, boot CPU (#0) not listed by the BIOS.
[    0.030363] SMP motherboard not detected.
[    0.030369] Local APIC not detected. Using dummy APIC emulation.
[    0.030373] SMP disabled
[    0.031041] Brought up 1 CPUs
[    0.031051] Total of 1 processors activated (2405.72 BogoMIPS).
[    0.031092] CPU0 attaching NULL sched-domain.
[    0.031584] devtmpfs: initialized
[    0.032847] regulator: core version 0.5
[    0.033006] NET: Registered protocol family 16
[    0.074975] PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=2
[    0.074983] PCI: Using configuration type 1 for base access
[    0.075934] bio: create slab <bio-0> at 0
[    0.076143] ACPI: Interpreter disabled.
[    0.076245] vgaarb: loaded
[    0.076369] PCI: Probing PCI hardware
[    0.076376] PCI: Probing PCI hardware (bus 00)
[    0.076637] pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[    0.076646] pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4 GPIO
[    0.076706] pci 0000:00:1f.1: reg 20 io port: [0xff00-0xff0f]
[    0.076794] pci 0000:02:06.0: reg 10 32bit mmio: [0xefef0000-0xefefffff]
[    0.076904] pci 0000:02:09.0: reg 10 io port: [0xd500-0xd5ff]
[    0.076915] pci 0000:02:09.0: reg 14 32bit mmio: [0xefefa000-0xefefa1ff]
[    0.076972] pci 0000:02:09.0: supports D1 D2
[    0.076977] pci 0000:02:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.076985] pci 0000:02:09.0: PME# disabled
[    0.077036] pci 0000:02:0a.0: reg 10 io port: [0xd600-0xd6ff]
[    0.077047] pci 0000:02:0a.0: reg 14 32bit mmio: [0xefefb000-0xefefb1ff]
[    0.077105] pci 0000:02:0a.0: supports D1 D2
[    0.077110] pci 0000:02:0a.0: PME# supported from D1 D2 D3hot D3cold
[    0.077116] pci 0000:02:0a.0: PME# disabled
[    0.077163] pci 0000:02:0b.0: reg 10 io port: [0xd900-0xd9ff]
[    0.077174] pci 0000:02:0b.0: reg 14 32bit mmio: [0xefefc000-0xefefc1ff]
[    0.077232] pci 0000:02:0b.0: supports D1 D2
[    0.077236] pci 0000:02:0b.0: PME# supported from D1 D2 D3hot D3cold
[    0.077243] pci 0000:02:0b.0: PME# disabled
[    0.077290] pci 0000:02:0c.0: reg 10 io port: [0xda00-0xdaff]
[    0.077301] pci 0000:02:0c.0: reg 14 32bit mmio: [0xefefd000-0xefefd1ff]
[    0.077358] pci 0000:02:0c.0: supports D1 D2
[    0.077363] pci 0000:02:0c.0: PME# supported from D1 D2 D3hot D3cold
[    0.077370] pci 0000:02:0c.0: PME# disabled
[    0.077417] pci 0000:02:0d.0: reg 10 io port: [0xdd00-0xddff]
[    0.077428] pci 0000:02:0d.0: reg 14 32bit mmio: [0xefefe000-0xefefe1ff]
[    0.077485] pci 0000:02:0d.0: supports D1 D2
[    0.077490] pci 0000:02:0d.0: PME# supported from D1 D2 D3hot D3cold
[    0.077496] pci 0000:02:0d.0: PME# disabled
[    0.077544] pci 0000:02:0e.0: reg 10 io port: [0xde00-0xdeff]
[    0.077554] pci 0000:02:0e.0: reg 14 32bit mmio: [0xefeff000-0xefeff1ff]
[    0.077611] pci 0000:02:0e.0: supports D1 D2
[    0.077616] pci 0000:02:0e.0: PME# supported from D1 D2 D3hot D3cold
[    0.077623] pci 0000:02:0e.0: PME# disabled
[    0.077660] pci 0000:00:1e.0: transparent bridge
[    0.077668] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[    0.077676] pci 0000:00:1e.0: bridge 32bit mmio: [0xefe00000-0xefefffff]
[    0.077685] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xefb00000-0xefbfffff]
[    0.078277] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2440]
[    0.078333] pci 0000:02:09.0: BAR 1: address space collision on of device [0xefefa000-0xefefa1ff]
[    0.078350] pci 0000:02:09.0: BAR 1: can't allocate resource
[    0.078359] pci 0000:02:0a.0: BAR 1: address space collision on of device [0xefefb000-0xefefb1ff]
[    0.078370] pci 0000:02:0a.0: BAR 1: can't allocate resource
[    0.078379] pci 0000:02:0b.0: BAR 1: address space collision on of device [0xefefc000-0xefefc1ff]
[    0.078390] pci 0000:02:0b.0: BAR 1: can't allocate resource
[    0.078399] pci 0000:02:0c.0: BAR 1: address space collision on of device [0xefefd000-0xefefd1ff]
[    0.078410] pci 0000:02:0c.0: BAR 1: can't allocate resource
[    0.078419] pci 0000:02:0d.0: BAR 1: address space collision on of device [0xefefe000-0xefefe1ff]
[    0.078429] pci 0000:02:0d.0: BAR 1: can't allocate resource
[    0.078438] pci 0000:02:0e.0: BAR 1: address space collision on of device [0xefeff000-0xefeff1ff]
[    0.078449] pci 0000:02:0e.0: BAR 1: can't allocate resource
[    0.078710] Switching to clocksource tsc
[    0.080001] pnp: PnP ACPI: disabled
[    0.080001] PnPBIOS: Scanning system for PnP BIOS support...
[    0.080001] PnPBIOS: Found PnP BIOS installation structure at 0xc00f74b0
[    0.080001] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x641b, dseg 0xf0000
[    0.080079] PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
[    0.080112] system 00:01: iomem range 0x0-0x9fbff could not be reserved
[    0.080119] system 00:01: iomem range 0x9fc00-0x9ffff could not be reserved
[    0.080126] system 00:01: iomem range 0xf0000-0xfffff could not be reserved
[    0.080133] system 00:01: iomem range 0x100000-0xfffffff could not be reserved
[    0.080140] system 00:01: iomem range 0xfffe0000-0xffffffff has been reserved
[    0.080760] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.080770] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
[    0.080779] pci 0000:00:1e.0:   MEM window: 0xefe00000-0xefefffff
[    0.080788] pci 0000:00:1e.0:   PREFETCH window: 0xefb00000-0xefbfffff
[    0.080812] pci 0000:00:1e.0: setting latency timer to 64
[    0.080824] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.080830] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.080836] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.080842] pci_bus 0000:02: resource 1 mem: [0xefe00000-0xefefffff]
[    0.080848] pci_bus 0000:02: resource 2 pref mem [0xefb00000-0xefbfffff]
[    0.080853] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.080859] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.080949] NET: Registered protocol family 2
[    0.081261] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.081982] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.082212] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.082440] TCP: Hash tables configured (established 8192 bind 8192)
[    0.082446] TCP reno registered
[    0.082710] NET: Registered protocol family 1
[    0.082927] Unpacking initramfs...
[    0.644663] Freeing initrd memory: 8528k freed
[    0.687763] audit: initializing netlink socket (disabled)
[    0.687805] type=2000 audit(1067730290.685:1): initialized
[    0.697441] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.700756] VFS: Disk quotas dquot_6.5.2
[    0.700911] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.701147] msgmni has been set to 496
[    0.701697] alg: No test for stdrng (krng)
[    0.701797] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.701804] io scheduler noop registered
[    0.701809] io scheduler anticipatory registered
[    0.701813] io scheduler deadline registered
[    0.701906] io scheduler cfq registered (default)
[    0.702345] isapnp: Scanning for PnP cards...
[    1.056185] isapnp: No Plug & Play device found
[    1.059417] Linux agpgart interface v0.103
[    1.059591] agpgart-intel 0000:00:00.0: Intel i815 Chipset
[    1.064965] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x0
[    1.065131] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.065268] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.065921] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.066204] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[    1.066210] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.066940] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.067152] mice: PS/2 mouse device common for all mice
[    1.067328] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.067356] rtc0: alarms up to one day, 114 bytes nvram
[    1.067380] cpuidle: using governor ladder
[    1.067385] cpuidle: using governor menu
[    1.067396] No iBFT detected.
[    1.068317] TCP cubic registered
[    1.068662] NET: Registered protocol family 10
[    1.070508] Mobile IPv6
[    1.070517] NET: Registered protocol family 17
[    1.070555] Using IPI No-Shortcut mode
[    1.070763] PM: Resume from disk failed.
[    1.070790] registered taskstats version 1
[    1.071153] rtc_cmos 00:05: setting system clock to 2003-11-01 23:44:51 UTC (1067730291)
[    1.071228] Initalizing network drop monitor service
[    1.071303] Freeing unused kernel memory: 380k freed
[    1.072755] Write protecting the kernel text: 2512k
[    1.072801] Write protecting the kernel read-only data: 924k
[    1.129491] udev[44]: starting version 164
[    1.423041] SCSI subsystem initialized
[    1.429837] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.429970] PCI: setting IRQ 10 as level-triggered
[    1.429978] 8139cp 0000:02:09.0: found PCI INT A -> IRQ 10
[    1.432032] eth0: RTL-8139C+ at 0xd08f8000, 00:90:7f:31:90:e2, IRQ 10
[    1.432102] PCI: setting IRQ 5 as level-triggered
[    1.432109] 8139cp 0000:02:0a.0: found PCI INT A -> IRQ 5
[    1.434130] eth1: RTL-8139C+ at 0xd08fc200, 00:90:7f:31:90:e3, IRQ 5
[    1.434201] PCI: setting IRQ 11 as level-triggered
[    1.434208] 8139cp 0000:02:0b.0: found PCI INT A -> IRQ 11
[    1.493765] eth2: RTL-8139C+ at 0xd0900400, 00:90:7f:31:90:e4, IRQ 11
[    1.493859] PCI: setting IRQ 12 as level-triggered
[    1.493866] 8139cp 0000:02:0c.0: found PCI INT A -> IRQ 12
[    1.496163] eth3: RTL-8139C+ at 0xd0904600, 00:90:7f:31:90:e5, IRQ 12
[    1.496233] PCI: setting IRQ 9 as level-triggered
[    1.496239] 8139cp 0000:02:0d.0: found PCI INT A -> IRQ 9
[    1.498566] eth4: RTL-8139C+ at 0xd0908800, 00:90:7f:31:90:e6, IRQ 9
[    1.498635] PCI: setting IRQ 6 as level-triggered
[    1.498642] 8139cp 0000:02:0e.0: found PCI INT A -> IRQ 6
[    1.501048] eth5: RTL-8139C+ at 0xd090ca00, 00:90:7f:31:90:e7, IRQ 6
[    1.511214] libata version 3.00 loaded.
[    1.522271] 8139too Fast Ethernet driver 0.9.28
[    1.533204] ata_piix 0000:00:1f.1: version 2.13
[    1.533352] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.536678] scsi0 : ata_piix
[    1.537872] scsi1 : ata_piix
[    1.538151] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.538158] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.701646] ata2.00: ATA-6: TOSHIBA MK4032GAX, AD102D, max UDMA/100
[    1.701655] ata2.00: 78140160 sectors, multi 16: LBA48
[    1.701702] ata2.00: limited to UDMA/33 due to 40-wire cable
[    1.709407] ata2.00: configured for UDMA/33
[    1.709717] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MK4032GA AD10 PQ: 0 ANSI: 5
[    1.740972] sd 1:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.741178] sd 1:0:0:0: [sda] Write Protect is off
[    1.741185] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.741245] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.741603]  sda: sda1 sda2
[    1.772195] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.288649] kjournald starting.  Commit interval 5 seconds
[    2.288681] EXT3-fs: mounted filesystem with ordered data mode.
[    4.009709] udev[188]: starting version 164
[    4.636111] parport_pc 00:0a: reported by Plug and Play BIOS
[    4.636188] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    4.680576] input: PC Speaker as /devices/platform/pcspkr/input/input0
[    4.884438] intel_rng: FWH not detected
[    4.907284] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.937468] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.193810] udev[200]: renamed network interface eth0 to eth6
[    5.738512] cfg80211: Using static regulatory domain info
[    5.738520] cfg80211: Regulatory domain: US
[    5.738524]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.738531]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    5.738537]  (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    5.738543]  (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    5.738549]  (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    5.738555]  (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    5.738560]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    5.739354] cfg80211: Calling CRDA for country: US
[    5.987415] PCI: setting IRQ 3 as level-triggered
[    5.987425] ath5k 0000:02:06.0: found PCI INT A -> IRQ 3
[    5.987553] ath5k 0000:02:06.0: registered as 'phy0'
[    6.676943] ath: EEPROM regdomain: 0x37
[    6.676951] ath: EEPROM indicates we should expect a direct regpair map
[    6.676958] ath: Country alpha2 being used: AT
[    6.676962] ath: Regpair used: 0x37
[    7.125075] phy0: Selected rate control algorithm 'minstrel'
[    7.127368] ath5k phy0: Atheros AR2417 chip found (MAC: 0xffffffff, PHY: 0x61)
[    7.127665] cfg80211: Calling CRDA for country: AT
[    7.143806] Error: Driver 'pcspkr' is already registered, aborting...
[    7.923970] EXT3 FS on sda2, internal journal
[    8.182037] loop: module loaded
[   12.145278] apm: BIOS not found.
[   12.236125] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input1
[   12.689733] lp0: using parport0 (interrupt-driven).
[   12.739964] ppdev: user-space parallel port driver
[   14.781460] Bluetooth: Core ver 2.15
[   14.781655] NET: Registered protocol family 31
[   14.781659] Bluetooth: HCI device and connection manager initialized
[   14.781667] Bluetooth: HCI socket layer initialized
[   14.880032] Bluetooth: L2CAP ver 2.14
[   14.880040] Bluetooth: L2CAP socket layer initialized
[   15.080103] Bluetooth: RFCOMM TTY layer initialized
[   15.080117] Bluetooth: RFCOMM socket layer initialized
[   15.080121] Bluetooth: RFCOMM ver 1.11
[   15.202084] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.202097] Bluetooth: BNEP filters: protocol multicast
[   15.469583] Bridge firewalling registered
[   15.723918] Bluetooth: SCO (Voice Link) ver 0.6
[   15.723926] Bluetooth: SCO socket layer initialized
root@debian:~# ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:560 (560.0 B)  TX bytes:560 (560.0 B)

root@debian:~# ifconfig eth0 up
eth0: ERROR while getting interface flags: Nie ma takiego urzÄ…dzenia
root@debian:~# ifconfig eth0
eth0: error fetching interface information: Device not found

Offline

 

#2  2013-08-04 18:42:24

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: problem z portami ethrnet

Pokaż:

Kod:

ifconfig -a

Offline

 

#3  2013-08-04 19:58:59

  tipsntrix - Użytkownik

tipsntrix
Użytkownik
Zarejestrowany: 2013-02-02

Re: problem z portami ethrnet

dziękuje za odpowiedz, zaadresowałem eth1, i o dziwo działa, ale drugi port.., dziwi mnie natomiast to że dmesg pokazuje eth0, coś pochrzanione...

Kod:

ifconfig -a
eth1      Link encap:Ethernet  HWaddr 00:90:7f:31:90:e3
          inet addr:192.168.2.37  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::290:7fff:fe31:90e3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8498 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6115 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:6302367 (6.0 MiB)  TX bytes:602036 (587.9 KiB)
          Interrupt:5 Base address:0x200

eth2      Link encap:Ethernet  HWaddr 00:90:7f:31:90:e4
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:11 Base address:0x8400

eth3      Link encap:Ethernet  HWaddr 00:90:7f:31:90:e5
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:12 Base address:0xa600

eth4      Link encap:Ethernet  HWaddr 00:90:7f:31:90:e6
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:9 Base address:0xc800

eth5      Link encap:Ethernet  HWaddr 00:90:7f:31:90:e7
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:6 Base address:0x8a00

eth6      Link encap:Ethernet  HWaddr 00:90:7f:31:90:e2
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:10

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:0e:8e:1f:77:b2
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Offline

 

#4  2013-08-04 20:28:01

  mati75 - Psuj

mati75
Psuj
Skąd: default city
Zarejestrowany: 2010-03-14
Serwis

Re: problem z portami ethrnet

Poproszę o:

Kod:

lspci | grep Ethernet
cat /etc/udev/rules.d/70-persistent-net.rules
[img]https://l0calh0st.pl/obrazki/userbar.png[/img]

Offline

 

#5  2013-08-04 22:34:40

  tipsntrix - Użytkownik

tipsntrix
Użytkownik
Zarejestrowany: 2013-02-02

Re: problem z portami ethrnet

W między czasie przeinstalowałem Debiana licząc na to że coś się naprawi, co niestety nie do końca zadziałało, zainstalowałem Debiana 7 , i teraz nie wykrywa mi portu do którego podpięty jest wyświetlacz LCD, ale to później...

wynik lspci |grep Ethernet

Kod:

lspci | grep Ethernet
02:06.0 Ethernet controller: Atheros Communications Inc. AR5413/AR5414 Wireless Network Adapter [AR5006X(S) 802.11abg] (rev 01)
02:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
02:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
02:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
02:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)

wynik cat /etc/udev/rules.d/70-persistent-net.rules

Kod:

cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:12:3f:21:80:83", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0e.0 (8139cp)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:90:7f:31:90:e7", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth5"

# PCI device 0x168c:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0 (ath5k)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0e:8e:1f:77:b2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"

# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0 (8139cp)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:90:7f:31:90:e5", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"

# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0b.0 (8139cp)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:90:7f:31:90:e4", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0 (8139cp)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:90:7f:31:90:e6", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4"

# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0 (8139cp)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:90:7f:31:90:e3", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:09.0 (8139cp)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:90:7f:31:90:e2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth6"

Dziękuje @mati75, naprowadziłeś mnie , zrozumiałem i poprawiłem :) teraz już są po kolei, dziękuje bardzo, odpowiednia korekta wpisów w 70-persistent-net.rules  rozwiązała problem.
Jeszcze korzystając z waszej uprzejmości , może naprowadzicie mnie jeszcze dlaczego nie wykrywa mi portu w którym mam LCD, Debian 6 widział to tak:

Kod:

[   12.689733] lp0: using parport0 (interrupt-driven).
[   12.739964] ppdev: user-space parallel port driver

a to dmesg z "siódemki":

Kod:

dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[    0.000000]  BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI: American Megatrends Inc.         Uknown                          /Unknown                         , BIOS 07.00T                           04/02/01
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x10000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FF0000000 write-back
[    0.000000]   1 base 010000000 mask FFFF80000 write-back
[    0.000000]   2 base 010000000 mask FFFF7F000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0010000000 page 2M
[    0.000000] kernel direct mapping tables up to 10000000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 0ef3f000 - 0f8a8000
[    0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 256MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 10000000
[    0.000000]   low ram: 0 - 10000000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00010000
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00010000
[    0.000000] On node 0 totalpages: 65423
[    0.000000] free_area_init_node: node 0, pgdat c1410740, node_mem_map cfdff200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 480 pages used for memmap
[    0.000000]   Normal zone: 60960 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:effe0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @cfded000 s33280 r0 d24064 u57344
[    0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64911
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=6acc365e-54e1-45d9-9ea7-77a76c03f345 ro quiet
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 244504k/262144k available (2851k kernel code, 17188k reserved, 1340k data, 416k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff9fe000   ( 753 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]       .init : 0xc1419000 - 0xc1481000   ( 416 kB)
[    0.000000]       .data : 0xc12c8fc0 - 0xc1418100   (1340 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c8fc0   (2851 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=ce806000 soft=ce808000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1202.599 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2405.19 BogoMIPS (lpj=4810396)
[    0.008016] pid_max: default: 32768 minimum: 301
[    0.008111] Security Framework initialized
[    0.008127] AppArmor: AppArmor disabled by boot time parameter
[    0.008166] Mount-cache hash table entries: 512
[    0.008476] Initializing cgroup subsys cpuacct
[    0.008491] Initializing cgroup subsys memory
[    0.008512] Initializing cgroup subsys devices
[    0.008518] Initializing cgroup subsys freezer
[    0.008524] Initializing cgroup subsys net_cls
[    0.008530] Initializing cgroup subsys blkio
[    0.008545] Initializing cgroup subsys perf_event
[    0.008620] mce: CPU supports 5 MCE banks
[    0.008699] SMP alternatives: switching to UP code
[    0.013798] Freeing SMP alternatives: 8k freed
[    0.013955] weird, boot CPU (#0) not listed by the BIOS.
[    0.013960] SMP motherboard not detected.
[    0.013966] Local APIC not detected. Using dummy APIC emulation.
[    0.013971] SMP disabled
[    0.013976] Performance Events:
[    0.013982] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.013987] no hardware sampling interrupt available.
[    0.013993] p6 PMU driver.
[    0.014002] ... version:                0
[    0.014006] ... bit width:              32
[    0.014011] ... generic registers:      2
[    0.014015] ... value mask:             00000000ffffffff
[    0.014020] ... max period:             000000007fffffff
[    0.014025] ... fixed-purpose events:   0
[    0.014029] ... event mask:             0000000000000003
[    0.014751] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[    0.014873] Brought up 1 CPUs
[    0.014880] Total of 1 processors activated (2405.19 BogoMIPS).
[    0.015486] devtmpfs: initialized
[    0.016587] print_constraints: dummy:
[    0.016752] NET: Registered protocol family 16
[    0.058821] PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=2
[    0.058830] PCI: Using configuration type 1 for base access
[    0.060750] bio: create slab <bio-0> at 0
[    0.060945] ACPI: Interpreter disabled.
[    0.061146] vgaarb: loaded
[    0.061260] PCI: Probing PCI hardware
[    0.061267] PCI: Probing PCI hardware (bus 00)
[    0.061370] pci 0000:00:00.0: [8086:1130] type 0 class 0x000600
[    0.061499] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.061562] pci 0000:00:1f.0: [8086:2440] type 0 class 0x000601
[    0.061651] pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
[    0.061662] pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH4 GPIO
[    0.061693] pci 0000:00:1f.1: [8086:244b] type 0 class 0x000101
[    0.061750] pci 0000:00:1f.1: reg 20: [io  0xff00-0xff0f]
[    0.061840] pci 0000:02:06.0: [168c:001b] type 0 class 0x000200
[    0.061864] pci 0000:02:06.0: reg 10: [mem 0xefef0000-0xefefffff]
[    0.061986] pci 0000:02:09.0: [10ec:8139] type 0 class 0x000200
[    0.062010] pci 0000:02:09.0: reg 10: [io  0xd500-0xd5ff]
[    0.062026] pci 0000:02:09.0: reg 14: [mem 0xefefa000-0xefefa1ff]
[    0.062104] pci 0000:02:09.0: supports D1 D2
[    0.062111] pci 0000:02:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.062144] pci 0000:02:0a.0: [10ec:8139] type 0 class 0x000200
[    0.062167] pci 0000:02:0a.0: reg 10: [io  0xd600-0xd6ff]
[    0.062183] pci 0000:02:0a.0: reg 14: [mem 0xefefb000-0xefefb1ff]
[    0.062261] pci 0000:02:0a.0: supports D1 D2
[    0.062267] pci 0000:02:0a.0: PME# supported from D1 D2 D3hot D3cold
[    0.062300] pci 0000:02:0b.0: [10ec:8139] type 0 class 0x000200
[    0.062324] pci 0000:02:0b.0: reg 10: [io  0xd900-0xd9ff]
[    0.062339] pci 0000:02:0b.0: reg 14: [mem 0xefefc000-0xefefc1ff]
[    0.062417] pci 0000:02:0b.0: supports D1 D2
[    0.062423] pci 0000:02:0b.0: PME# supported from D1 D2 D3hot D3cold
[    0.062455] pci 0000:02:0c.0: [10ec:8139] type 0 class 0x000200
[    0.062478] pci 0000:02:0c.0: reg 10: [io  0xda00-0xdaff]
[    0.062494] pci 0000:02:0c.0: reg 14: [mem 0xefefd000-0xefefd1ff]
[    0.062572] pci 0000:02:0c.0: supports D1 D2
[    0.062578] pci 0000:02:0c.0: PME# supported from D1 D2 D3hot D3cold
[    0.062611] pci 0000:02:0d.0: [10ec:8139] type 0 class 0x000200
[    0.062635] pci 0000:02:0d.0: reg 10: [io  0xdd00-0xddff]
[    0.062650] pci 0000:02:0d.0: reg 14: [mem 0xefefe000-0xefefe1ff]
[    0.062729] pci 0000:02:0d.0: supports D1 D2
[    0.062735] pci 0000:02:0d.0: PME# supported from D1 D2 D3hot D3cold
[    0.062766] pci 0000:02:0e.0: [10ec:8139] type 0 class 0x000200
[    0.062789] pci 0000:02:0e.0: reg 10: [io  0xde00-0xdeff]
[    0.062805] pci 0000:02:0e.0: reg 14: [mem 0xefeff000-0xefeff1ff]
[    0.062883] pci 0000:02:0e.0: supports D1 D2
[    0.062889] pci 0000:02:0e.0: PME# supported from D1 D2 D3hot D3cold
[    0.062927] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.062938] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.062947] pci 0000:00:1e.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.062957] pci 0000:00:1e.0:   bridge window [mem 0xefb00000-0xefbfffff pref]
[    0.062965] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.062973] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.063986] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2440]
[    0.064068] PCI: pci_cache_line_size set to 32 bytes
[    0.064101] pci 0000:02:09.0: address space collision: [mem 0xefefa000-0xefefa1ff] conflicts with 0000:02:06.0 [mem 0xefef0000-0xefefffff]
[    0.064115] pci 0000:02:0a.0: address space collision: [mem 0xefefb000-0xefefb1ff] conflicts with 0000:02:06.0 [mem 0xefef0000-0xefefffff]
[    0.064128] pci 0000:02:0b.0: address space collision: [mem 0xefefc000-0xefefc1ff] conflicts with 0000:02:06.0 [mem 0xefef0000-0xefefffff]
[    0.064142] pci 0000:02:0c.0: address space collision: [mem 0xefefd000-0xefefd1ff] conflicts with 0000:02:06.0 [mem 0xefef0000-0xefefffff]
[    0.064156] pci 0000:02:0d.0: address space collision: [mem 0xefefe000-0xefefe1ff] conflicts with 0000:02:06.0 [mem 0xefef0000-0xefefffff]
[    0.064169] pci 0000:02:0e.0: address space collision: [mem 0xefeff000-0xefeff1ff] conflicts with 0000:02:06.0 [mem 0xefef0000-0xefefffff]
[    0.064206] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.064563] Switching to clocksource pit
[    0.069736] pnp: PnP ACPI: disabled
[    0.069754] PnPBIOS: Scanning system for PnP BIOS support...
[    0.069850] PnPBIOS: Found PnP BIOS installation structure at 0xc00f74b0
[    0.069859] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x641b, dseg 0xf0000
[    0.069991] pnp 00:00: [io  0x4000-0x407f]
[    0.070000] pnp 00:00: [io  0x0540-0x054f]
[    0.070006] pnp 00:00: [io  0x4080-0x40bf]
[    0.070012] pnp 00:00: [io  0x04d0-0x04d1]
[    0.070018] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.070024] pnp 00:00: [io  0x0290-0x0297]
[    0.070030] pnp 00:00: [io  0x002e]
[    0.070035] pnp 00:00: [io  0x002f]
[    0.070121] pnp 00:00: Plug and Play BIOS device, IDs PNP0a03 (active)
[    0.070143] pnp 00:01: [mem 0x00000000-0x0009fbff]
[    0.070150] pnp 00:01: [mem 0x0009fc00-0x0009ffff]
[    0.070156] pnp 00:01: [mem 0x000f0000-0x000fffff]
[    0.070163] pnp 00:01: [mem 0x00100000-0x0fffffff]
[    0.070169] pnp 00:01: [mem 0xfffffffffffe0000-0xffffffffffffffff]
[    0.070290] system 00:01: [mem 0x00000000-0x0009fbff] could not be reserved
[    0.070301] system 00:01: [mem 0x0009fc00-0x0009ffff] could not be reserved
[    0.070310] system 00:01: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.070319] system 00:01: [mem 0x00100000-0x0fffffff] could not be reserved
[    0.070327] system 00:01: [mem 0xfffffffffffe0000-0xffffffffffffffff] could not be reserved
[    0.070338] system 00:01: Plug and Play BIOS device, IDs PNP0c01 (active)
[    0.070357] pnp 00:02: [io  0x0020-0x0021]
[    0.070363] pnp 00:02: [io  0x00a0-0x00a1]
[    0.070371] pnp 00:02: [irq 2]
[    0.070431] pnp 00:02: Plug and Play BIOS device, IDs PNP0000 (active)
[    0.070448] pnp 00:03: [dma 4]
[    0.070455] pnp 00:03: [io  0x0000-0x000f]
[    0.070461] pnp 00:03: [io  0x0080-0x0090]
[    0.070467] pnp 00:03: [io  0x0094-0x009f]
[    0.070472] pnp 00:03: [io  0x00c0-0x00de]
[    0.070524] pnp 00:03: Plug and Play BIOS device, IDs PNP0200 (active)
[    0.070542] pnp 00:04: [irq 0]
[    0.070548] pnp 00:04: [io  0x0040-0x0043]
[    0.070596] pnp 00:04: Plug and Play BIOS device, IDs PNP0100 (active)
[    0.070613] pnp 00:05: [irq 8]
[    0.070620] pnp 00:05: [io  0x0070-0x0071]
[    0.070667] pnp 00:05: Plug and Play BIOS device, IDs PNP0b00 (active)
[    0.070684] pnp 00:06: [irq 1]
[    0.070690] pnp 00:06: [io  0x0060]
[    0.070696] pnp 00:06: [io  0x0064]
[    0.070748] pnp 00:06: Plug and Play BIOS device, IDs PNP0303 (active)
[    0.070765] pnp 00:07: [io  0x0061]
[    0.070818] pnp 00:07: Plug and Play BIOS device, IDs PNP0800 (active)
[    0.070839] pnp 00:08: [irq 13]
[    0.070845] pnp 00:08: [io  0x00f0-0x00ff]
[    0.070894] pnp 00:08: Plug and Play BIOS device, IDs PNP0c04 (active)
[    0.070949] pnp 00:09: [io  0x03f8-0x03ff]
[    0.070956] pnp 00:09: [irq 4]
[    0.071048] pnp 00:09: Plug and Play BIOS device, IDs PNP0501 (active)
[    0.071165] pnp 00:0a: [io  0x0378-0x037f]
[    0.071171] pnp 00:0a: [io  0x0778-0x077a]
[    0.071177] pnp 00:0a: [irq 7]
[    0.071183] pnp 00:0a: [dma 3]
[    0.071284] pnp 00:0a: Plug and Play BIOS device, IDs PNP0401 (active)
[    0.071304] pnp 00:0b: [mem 0xffffffffffb80000-0xffffffffffbfffff]
[    0.071357] pnp 00:0b: Plug and Play BIOS device, IDs INT0800 (active)
[    0.071461] PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
[    0.077018] PCI: max bus depth: 1 pci_try_num: 2
[    0.077083] pci 0000:02:09.0: BAR 1: assigned [mem 0xefe00000-0xefe001ff]
[    0.077098] pci 0000:02:0a.0: BAR 1: assigned [mem 0xefe00200-0xefe003ff]
[    0.077110] pci 0000:02:0b.0: BAR 1: assigned [mem 0xefe00400-0xefe005ff]
[    0.077121] pci 0000:02:0c.0: BAR 1: assigned [mem 0xefe00600-0xefe007ff]
[    0.077133] pci 0000:02:0d.0: BAR 1: assigned [mem 0xefe00800-0xefe009ff]
[    0.077144] pci 0000:02:0e.0: BAR 1: assigned [mem 0xefe00a00-0xefe00bff]
[    0.077156] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.077164] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.077175] pci 0000:00:1e.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.077185] pci 0000:00:1e.0:   bridge window [mem 0xefb00000-0xefbfffff pref]
[    0.077211] pci 0000:00:1e.0: setting latency timer to 64
[    0.077221] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.077228] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[    0.077235] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.077242] pci_bus 0000:02: resource 1 [mem 0xefe00000-0xefefffff]
[    0.077249] pci_bus 0000:02: resource 2 [mem 0xefb00000-0xefbfffff pref]
[    0.077255] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.077262] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[    0.077416] NET: Registered protocol family 2
[    0.077618] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.078179] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.078416] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.078653] TCP: Hash tables configured (established 8192 bind 8192)
[    0.078660] TCP reno registered
[    0.078671] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    0.078714] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    0.079057] NET: Registered protocol family 1
[    0.079146] PCI: CLS 32 bytes, default 32
[    0.079338] Unpacking initramfs...
[    0.782177] Freeing initrd memory: 9636k freed
[    0.831797] audit: initializing netlink socket (disabled)
[    0.831844] type=2000 audit(1067735435.828:1): initialized
[    0.865422] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.865761] VFS: Disk quotas dquot_6.5.2
[    0.865841] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.866019] msgmni has been set to 496
[    0.866476] alg: No test for stdrng (krng)
[    0.866557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.866567] io scheduler noop registered
[    0.866572] io scheduler deadline registered
[    0.866593] io scheduler cfq registered (default)
[    0.866840] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.866899] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.866905] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.867154] intel_idle: does not run on family 6 model 11
[    0.867286] isapnp: Scanning for PnP cards...
[    1.221357] isapnp: No Plug & Play device found
[    1.221551] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.225918] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.230930] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.231370] Linux agpgart interface v0.103
[    1.231667] agpgart-intel 0000:00:00.0: Intel i815 Chipset
[    1.237069] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x0
[    1.237444] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[    1.237451] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.238340] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.238626] mousedev: PS/2 mouse device common for all mice
[    1.238890] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.238923] rtc0: alarms up to one day, 114 bytes nvram
[    1.238952] cpuidle: using governor ladder
[    1.238958] cpuidle: using governor menu
[    1.239650] TCP cubic registered
[    1.239711] NET: Registered protocol family 10
[    1.240984] Mobile IPv6
[    1.240994] NET: Registered protocol family 17
[    1.241006] Registering the dns_resolver key type
[    1.241067] Using IPI No-Shortcut mode
[    1.241364] PM: Hibernation image not present or could not be loaded.
[    1.241395] registered taskstats version 1
[    1.241735] rtc_cmos 00:05: setting system clock to 2003-11-02 01:10:36 UTC (1067735436)
[    1.241810] Initializing network drop monitor service
[    1.242101] Freeing unused kernel memory: 416k freed
[    1.243833] Write protecting the kernel text: 2852k
[    1.243909] Write protecting the kernel read-only data: 1084k
[    1.291948] udevd[44]: starting version 175
[    1.390977] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.391069] PCI: setting IRQ 10 as level-triggered
[    1.391080] 8139cp 0000:02:09.0: found PCI INT A -> IRQ 10
[    1.402972] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.418189] 8139cp 0000:02:09.0: eth0: RTL-8139C+ at 0xd0860000, 00:90:7f:31:90:e2, IRQ 10
[    1.418278] PCI: setting IRQ 5 as level-triggered
[    1.418286] 8139cp 0000:02:0a.0: found PCI INT A -> IRQ 5
[    1.428649] 8139cp 0000:02:0a.0: eth1: RTL-8139C+ at 0xd0970200, 00:90:7f:31:90:e3, IRQ 5
[    1.428725] 8139too 0000:02:0b.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp
[    1.428753] 8139too 0000:02:0c.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp
[    1.428775] 8139too 0000:02:0d.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp
[    1.428796] 8139too 0000:02:0e.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp
[    1.431209] PCI: setting IRQ 11 as level-triggered
[    1.431224] 8139cp 0000:02:0b.0: found PCI INT A -> IRQ 11
[    1.433045] 8139cp 0000:02:0b.0: eth2: RTL-8139C+ at 0xd0868400, 00:90:7f:31:90:e4, IRQ 11
[    1.433103] PCI: setting IRQ 12 as level-triggered
[    1.433110] 8139cp 0000:02:0c.0: found PCI INT A -> IRQ 12
[    1.434751] 8139cp 0000:02:0c.0: eth3: RTL-8139C+ at 0xd086a600, 00:90:7f:31:90:e5, IRQ 12
[    1.434802] PCI: setting IRQ 9 as level-triggered
[    1.434809] 8139cp 0000:02:0d.0: found PCI INT A -> IRQ 9
[    1.439819] SCSI subsystem initialized
[    1.457069] 8139cp 0000:02:0d.0: eth4: RTL-8139C+ at 0xd086c800, 00:90:7f:31:90:e6, IRQ 9
[    1.457152] PCI: setting IRQ 6 as level-triggered
[    1.457160] 8139cp 0000:02:0e.0: found PCI INT A -> IRQ 6
[    1.459101] 8139cp 0000:02:0e.0: eth5: RTL-8139C+ at 0xd0838a00, 00:90:7f:31:90:e7, IRQ 6
[    1.500011] libata version 3.00 loaded.
[    1.501157] ata_piix 0000:00:1f.1: version 2.13
[    1.501299] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.506058] scsi0 : ata_piix
[    1.511639] scsi1 : ata_piix
[    1.511830] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.511839] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.685338] ata2.00: HPA detected: current 156293231, native 156301488
[    1.685355] ata2.00: ATA-6: ST980815A, 3.ALD, max UDMA/100
[    1.685362] ata2.00: 156293231 sectors, multi 16: LBA48
[    1.685376] ata2.00: limited to UDMA/33 due to 40-wire cable
[    1.700126] ata2.00: configured for UDMA/33
[    1.700506] scsi 1:0:0:0: Direct-Access     ATA      ST980815A        3.AL PQ: 0 ANSI: 5
[    1.720319] sd 1:0:0:0: [sda] 156293231 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.720467] sd 1:0:0:0: [sda] Write Protect is off
[    1.720476] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.720538] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.811550]  sda: sda1 sda2 < sda5 >
[    1.812923] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.820144] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.863533] Switching to clocksource tsc
[    2.237924] PM: Starting manual resume from disk
[    2.237940] PM: Hibernation image partition 8:5 present
[    2.237945] PM: Looking for hibernation image.
[    2.238554] PM: Image not found (code -22)
[    2.238561] PM: Hibernation image not present or could not be loaded.
[    2.350697] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.881899] udevd[241]: starting version 175
[    5.209897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.469083] input: PC Speaker as /devices/platform/pcspkr/input/input0
[    5.600763] intel_rng: FWH not detected
[    5.721835] udevd[276]: renamed network interface eth0 to eth6
[    5.741653] iTCO_vendor_support: vendor-support=0
[    5.753572] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    5.753748] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    6.053109] cfg80211: Calling CRDA to update world regulatory domain
[    6.170723] Error: Driver 'pcspkr' is already registered, aborting...
[    6.226974] PCI: setting IRQ 3 as level-triggered
[    6.226990] ath5k 0000:02:06.0: found PCI INT A -> IRQ 3
[    6.227155] ath5k 0000:02:06.0: registered as 'phy0'
[    6.892670] ath: EEPROM regdomain: 0x37
[    6.892679] ath: EEPROM indicates we should expect a direct regpair map
[    6.892687] ath: Country alpha2 being used: AW
[    6.892692] ath: Regpair used: 0x37
[    7.049833] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.052506] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
[    8.602571] Adding 1552380k swap on /dev/sda5.  Priority:-1 extents:1 across:1552380k
[    8.656396] EXT4-fs (sda1): re-mounted. Opts: (null)
[    8.990197] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.153256] loop: module loaded
[   12.923437] RPC: Registered named UNIX socket transport module.
[   12.923450] RPC: Registered udp transport module.
[   12.923455] RPC: Registered tcp transport module.
[   12.923460] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.010260] FS-Cache: Loaded
[   13.043107] 8139cp 0000:02:0a.0: eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
[   13.116444] FS-Cache: Netfs 'nfs' registered for caching
[   13.185519] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   23.803074] eth1: no IPv6 routers present

Offline

 

#6  2013-08-04 22:49:41

  mati75 - Psuj

mati75
Psuj
Skąd: default city
Zarejestrowany: 2010-03-14
Serwis

Re: problem z portami ethrnet

Jak myśle lcd pod lpt?
Można spróbować:

Kod:

modprobe ppdev

lub

Kod:

chmod 666 /dev/parport0
[img]https://l0calh0st.pl/obrazki/userbar.png[/img]

Offline

 

#7  2013-08-04 23:50:38

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: problem z portami ethrnet

[quote=mati75]Poproszę o:

Kod:

lspci | grep Ethernet
cat /etc/udev/rules.d/70-persistent-net.rules

[/quote]
Ku pamięci:

Ten plik 70-persinent-net-rules odchodzi  do przeszłości, w najnowszym Udevie zmienił nazwę na:

Kod:

/etc/udev/rules.d/80-net-name-slot.rules

Nie wiem, od której wersji to się zaczęło, ale w tej tak jest na 100%

Kod:

sys-fs/udev-197-r8

W Debku po którejś aktualizacji też może wyskoczyć ten problem. ;)

Pozdrawiam
;-)

Ostatnio edytowany przez Jacekalex (2013-08-04 23:52:33)

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#8  2013-08-05 10:16:20

  mati75 - Psuj

mati75
Psuj
Skąd: default city
Zarejestrowany: 2010-03-14
Serwis

Re: problem z portami ethrnet

Brałem z udeva 204, więc nie wiem od czego zależy.

Ostatnio edytowany przez mati75 (2013-08-05 10:16:57)

[img]https://l0calh0st.pl/obrazki/userbar.png[/img]

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)

[ Generated in 0.010 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00008 SET CHARSET latin2
0.00007 SET NAMES latin2
0.00134 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.21.246.223' WHERE u.id=1
0.00073 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.21.246.223', 1728300084)
0.00058 SELECT * FROM punbb_online WHERE logged<1728299784
0.00054 SELECT topic_id FROM punbb_posts WHERE id=238198
0.00007 SELECT id FROM punbb_posts WHERE topic_id=24044 ORDER BY posted
0.00041 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24044 AND t.moved_to IS NULL
0.00033 SELECT search_for, replace_with FROM punbb_censoring
0.00236 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24044 ORDER BY p.id LIMIT 0,25
0.00092 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24044
Total query time: 0.00743 s