Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2013-08-09 16:32:54
adi1423 - 
Użytkownik
- adi1423
- Użytkownik
- Zarejestrowany: 2013-04-20
Telefon Nokia gdzie jest?
Mój (kolejny) problem jest taki że gdy podłączam telefon do usb to nie pojaia się on na pulpicie (jak pendrive) ani w menadżerze plików do czego jestem przyzwyczajony, więc wie ktoś gdzie szukać mojego telefonu? lub jeżeli nigdzie go nie będzie to czy jest jakiś program do obsługi nokii?
Nie wiem czy to coś da ale telefon to Nokia N8
Ostatnio edytowany przez adi1423 (2013-08-09 16:55:28)
Offline
#2 2013-08-09 16:57:08
mati75 - Psuj
#3 2013-08-09 17:20:29
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Telefon Nokia gdzie jest?
Kiepsko widzę tą Nokię:
http://wammu.eu/phones/nokia/?page=7
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#4 2013-08-09 19:14:16
adi1423 - Użytkownik
- adi1423
- Użytkownik
- Zarejestrowany: 2013-04-20
Re: Telefon Nokia gdzie jest?
[quote=Jacekalex]Kiepsko widzę tą Nokię:
http://wammu.eu/phones/nokia/?page=7[/quote]
No widzisz a ja wcale ;)
Offline
#5 2013-08-10 11:03:09
adi1423 - Użytkownik
- adi1423
- Użytkownik
- Zarejestrowany: 2013-04-20
Re: Telefon Nokia gdzie jest?
[quote=mati75]
Kod:
lsusb dmesg
[/quote]
Kod:
root@localhost:/home/miczeb15# lsusb Bus 007 Device 002: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 007 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 008 Device 002: ID 0421:0302 Nokia Mobile Phones Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@localhost:/home/miczeb15#
Kod:
[ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 07C000000 mask FFC000000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07BC00000 mask FFFC00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 1984MB, range: 64MB, type UC [ 0.000000] reg 1, base: 0GB, range: 2GB, type WB [ 0.000000] reg 2, base: 1980MB, range: 4MB, type UC [ 0.000000] total RAM covered: 1980M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 1980MB, range: 4MB, type UC [ 0.000000] reg 2, base: 1984MB, range: 64MB, type UC [ 0.000000] found SMP MP-table at [mem 0x000f7310-0x000f731f] mapped at [c00f7310] [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff] [ 0.000000] [mem 0x36400000-0x367fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff] [ 0.000000] [mem 0x30000000-0x363fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff] [ 0.000000] [mem 0x36800000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x00614000, 0x00614fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36870000-0x3742ffff] [ 0.000000] ACPI: RSDP 000f7190 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 7bbf44df 00064 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000) [ 0.000000] ACPI: FACP 7bbe4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 7bbe5000 0A4E7 (v02 Intel CANTIGA 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 7bb9efc0 00040 [ 0.000000] ACPI: HPET 7bbfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7bbfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: SLIC 7bbfedfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001) [ 0.000000] ACPI: APIC 7bbfef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7bbfefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 7bbf457b 001BC (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7bbe3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1092MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x00615000, 0x00615fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x7bbfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x7b6a0fff] [ 0.000000] node 0: [mem 0x7b6a7000-0x7b7bbfff] [ 0.000000] node 0: [mem 0x7b80f000-0x7b907fff] [ 0.000000] node 0: [mem 0x7bb0f000-0x7bb17fff] [ 0.000000] node 0: [mem 0x7bb1f000-0x7bb63fff] [ 0.000000] node 0: [mem 0x7bb9f000-0x7bbe1fff] [ 0.000000] node 0: [mem 0x7bbff000-0x7bbfffff] [ 0.000000] On node 0 totalpages: 506077 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2185 pages used for memmap [ 0.000000] HighMem zone: 278851 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f743f000 s27200 r0 d21952 u49152 [ 0.000000] pcpu-alloc: s27200 r0 d21952 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504301 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-4.slh.1-aptosid-686 root=UUID=fddcf712-2c23-4a16-b73b-cce3c8b00536 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00) [ 0.000000] Memory: 1990076k/2027520k available (2975k kernel code, 34232k reserved, 1462k data, 404k init, 1115404k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0556000 - 0xc05bb000 ( 404 kB) [ 0.000000] .data : 0xc03e7ff2 - 0xc05558c0 (1462 kB) [ 0.000000] .text : 0xc0100000 - 0xc03e7ff2 (2975 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2161.368 MHz processor [ 0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.73 BogoMIPS (lpj=2161368) [ 0.001005] pid_max: default: 32768 minimum: 301 [ 0.001033] Security Framework initialized [ 0.001036] SELinux: Disabled at boot. [ 0.001047] Mount-cache hash table entries: 512 [ 0.001249] Initializing cgroup subsys devices [ 0.001252] Initializing cgroup subsys freezer [ 0.001254] Initializing cgroup subsys net_cls [ 0.001257] Initializing cgroup subsys blkio [ 0.001259] Initializing cgroup subsys perf_event [ 0.001291] CPU: Physical Processor ID: 0 [ 0.001293] CPU: Processor Core ID: 0 [ 0.001296] mce: CPU supports 6 MCE banks [ 0.001303] CPU0: Thermal monitoring enabled (TM1) [ 0.001314] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.001314] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.001314] tlb_flushall_shift: -1 [ 0.001388] Freeing SMP alternatives: 8k freed [ 0.002040] ACPI: Core revision 20130328 [ 0.006367] ACPI: All ACPI Tables successfully acquired [ 0.007081] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.007459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.018360] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz (fam: 06, model: 0f, stepping: 0d) [ 0.019000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.019000] perf_event_intel: PEBS disabled due to CPU errata [ 0.019000] ... version: 2 [ 0.019000] ... bit width: 40 [ 0.019000] ... generic registers: 2 [ 0.019000] ... value mask: 000000ffffffffff [ 0.019000] ... max period: 000000007fffffff [ 0.019000] ... fixed-purpose events: 3 [ 0.019000] ... event mask: 0000000700000003 [ 0.026052] CPU 1 irqstacks, hard=f54b6000 soft=f54c0000 [ 0.026055] smpboot: Booting Node 0, Processors #1 OK [ 0.002000] Initializing CPU#1 [ 0.038049] Brought up 2 CPUs [ 0.038053] smpboot: Total of 2 processors activated (8645.47 BogoMIPS) [ 0.039089] devtmpfs: initialized [ 0.039574] PM: Registering ACPI NVS region [mem 0x7bb64000-0x7bb9efff] (241664 bytes) [ 0.039574] NET: Registered protocol family 16 [ 0.039574] ACPI: bus type PCI registered [ 0.040069] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.040073] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.040075] PCI: Using MMCONFIG for extended config space [ 0.040077] PCI: Using configuration type 1 for base access [ 0.040598] bio: create slab <bio-0> at 0 [ 0.040598] ACPI: Added _OSI(Module Device) [ 0.040598] ACPI: Added _OSI(Processor Device) [ 0.040598] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.041006] ACPI: Added _OSI(Processor Aggregator Device) [ 0.042578] ACPI: EC: Look up EC in DSDT [ 0.046076] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.046808] ACPI: SSDT 7bb1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.047207] ACPI: Dynamic OEM Table Load: [ 0.047211] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.047324] ACPI: SSDT 7bb18620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.047700] ACPI: Dynamic OEM Table Load: [ 0.047703] ACPI: SSDT (null) 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.052254] ACPI: SSDT 7bb19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.052666] ACPI: Dynamic OEM Table Load: [ 0.052670] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.055090] ACPI: SSDT 7bb19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.055312] ACPI: Dynamic OEM Table Load: [ 0.055315] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.072078] ACPI: Interpreter enabled [ 0.072095] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.072101] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.072117] ACPI: (supports S0 S3 S4 S5) [ 0.072120] ACPI: Using IOAPIC for interrupt routing [ 0.072156] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.072255] ACPI: No dock devices found. [ 0.083701] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.084484] PCI host bridge to bus 0000:00 [ 0.084489] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.084493] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.084496] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.084499] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.084502] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.084505] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.084508] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.084511] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.084515] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.084529] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.084558] DMAR: Forcing write-buffer flush capability [ 0.084560] DMAR: Disabling IOMMU for graphics on this chipset [ 0.084660] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.084678] pci 0000:00:02.0: reg 10: [mem 0xf8000000-0xf83fffff 64bit] [ 0.084689] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.084697] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.084774] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.084788] pci 0000:00:02.1: reg 10: [mem 0xf8400000-0xf84fffff 64bit] [ 0.084950] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.085008] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] [ 0.085103] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.085147] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.085205] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] [ 0.085303] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.085347] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.085400] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f] [ 0.085496] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.085548] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.085573] pci 0000:00:1a.7: reg 10: [mem 0xf8904000-0xf89043ff] [ 0.085681] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.085727] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.085775] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.085795] pci 0000:00:1b.0: reg 10: [mem 0xf8900000-0xf8903fff 64bit] [ 0.085878] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.085928] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.085971] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.086061] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.086146] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.086231] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.086320] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.086405] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.086493] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.086578] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.086670] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.086754] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.086851] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.086904] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f] [ 0.086989] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.087035] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.087087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf] [ 0.087171] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.087216] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.087270] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df] [ 0.087357] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.087409] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.087435] pci 0000:00:1d.7: reg 10: [mem 0xf8904400-0xf89047ff] [ 0.087542] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.087582] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.087624] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.087701] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.087746] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.087915] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f [ 0.087935] pci 0000:00:1f.2: reg 10: [io 0x18f8-0x18ff] [ 0.087945] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f] [ 0.087956] pci 0000:00:1f.2: reg 18: [io 0x18f0-0x18f7] [ 0.087966] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b] [ 0.087976] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ef] [ 0.087987] pci 0000:00:1f.2: reg 24: [io 0x1810-0x181f] [ 0.088115] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.088134] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit] [ 0.088161] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.088272] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185 [ 0.088291] pci 0000:00:1f.5: reg 10: [io 0x1c50-0x1c57] [ 0.088302] pci 0000:00:1f.5: reg 14: [io 0x1c44-0x1c47] [ 0.088312] pci 0000:00:1f.5: reg 18: [io 0x1c48-0x1c4f] [ 0.088322] pci 0000:00:1f.5: reg 1c: [io 0x1c40-0x1c43] [ 0.088333] pci 0000:00:1f.5: reg 20: [io 0x1c30-0x1c3f] [ 0.088343] pci 0000:00:1f.5: reg 24: [io 0x1c20-0x1c2f] [ 0.088701] pci 0000:02:00.0: [11ab:436b] type 00 class 0x020000 [ 0.088882] pci 0000:02:00.0: reg 10: [mem 0xf8500000-0xf8503fff 64bit] [ 0.088983] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff] [ 0.089309] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.089772] pci 0000:02:00.0: supports D1 D2 [ 0.089775] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.089885] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.090028] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.090034] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.090039] pci 0000:00:1c.0: bridge window [mem 0xf8500000-0xf85fffff] [ 0.090169] pci 0000:03:00.0: [8086:4229] type 00 class 0x028000 [ 0.090225] pci 0000:03:00.0: reg 10: [mem 0xf8600000-0xf8601fff 64bit] [ 0.090423] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.092042] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.092050] pci 0000:00:1c.1: bridge window [mem 0xf8600000-0xf86fffff] [ 0.092120] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.092197] pci 0000:00:1c.3: PCI bridge to [bus 05-07] [ 0.092202] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.092208] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.092215] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.092280] pci 0000:00:1c.4: PCI bridge to [bus 08-0a] [ 0.092285] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.092290] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.092298] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.092386] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode) [ 0.092398] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.092401] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.092405] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.092408] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.092411] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.092414] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.092417] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.092421] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.092452] pci_bus 0000:00: on NUMA node 0 [ 0.092456] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.092459] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.092913] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) [ 0.092977] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11) [ 0.093043] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11) [ 0.093104] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11) [ 0.093164] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11) [ 0.093225] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) [ 0.093285] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.093347] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11) [ 0.093591] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.093599] acpi root: \_SB_.PCI0 notify handler is installed [ 0.093650] Found 1 acpi root devices [ 0.094024] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.094088] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.094088] vgaarb: loaded [ 0.094088] vgaarb: bridge control possible 0000:00:02.0 [ 0.094088] PCI: Using ACPI for IRQ routing [ 0.101460] PCI: pci_cache_line_size set to 64 bytes [ 0.101642] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.101644] e820: reserve RAM buffer [mem 0x7b6a1000-0x7bffffff] [ 0.101648] e820: reserve RAM buffer [mem 0x7b7bc000-0x7bffffff] [ 0.101651] e820: reserve RAM buffer [mem 0x7b908000-0x7bffffff] [ 0.101653] e820: reserve RAM buffer [mem 0x7bb18000-0x7bffffff] [ 0.101656] e820: reserve RAM buffer [mem 0x7bb64000-0x7bffffff] [ 0.101659] e820: reserve RAM buffer [mem 0x7bbe2000-0x7bffffff] [ 0.101661] e820: reserve RAM buffer [mem 0x7bc00000-0x7bffffff] [ 0.101777] NetLabel: Initializing [ 0.101780] NetLabel: domain hash size = 128 [ 0.101781] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.101797] NetLabel: unlabeled traffic allowed by default [ 0.101826] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.101832] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.101837] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.104017] Switching to clocksource hpet [ 0.104081] pnp: PnP ACPI init [ 0.104092] ACPI: bus type PNP registered [ 0.104216] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.104256] pnp 00:01: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active) [ 0.104268] pnp 00:02: [dma 4] [ 0.104290] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.104318] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.104425] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.104429] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.104467] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.104533] system 00:06: [io 0x1200-0x120f] has been reserved [ 0.104537] system 00:06: [io 0x0480-0x048f] has been reserved [ 0.104541] system 00:06: [io 0xffff] has been reserved [ 0.104544] system 00:06: [io 0xffff] has been reserved [ 0.104548] system 00:06: [io 0x0400-0x047f] has been reserved [ 0.104551] system 00:06: [io 0x1180-0x11ff] has been reserved [ 0.104554] system 00:06: [io 0xfe00] has been reserved [ 0.104558] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.104593] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.104765] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.104769] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.104773] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.104776] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.104780] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.104783] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.104787] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.104912] pnp: PnP ACPI: found 9 devices [ 0.104914] ACPI: bus type PNP unregistered [ 0.325899] PM-Timer running at invalid rate: 714% of normal - aborting. [ 0.325918] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000 [ 0.325930] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.325934] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.325945] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.325949] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 0.325953] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 [ 0.325984] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 [ 0.325988] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.325991] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.325995] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.325998] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.326009] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.326016] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x802fffff pref] [ 0.326021] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref] [ 0.326026] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80500000-0x806fffff] [ 0.326031] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80700000-0x808fffff 64bit pref] [ 0.326036] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff] [ 0.326040] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] [ 0.326045] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80900000-0x809000ff 64bit] [ 0.326058] pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref] [ 0.326061] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.326065] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.326072] pci 0000:00:1c.0: bridge window [mem 0xf8500000-0xf85fffff] [ 0.326077] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x802fffff pref] [ 0.326084] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.326088] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.326095] pci 0000:00:1c.1: bridge window [mem 0xf8600000-0xf86fffff] [ 0.326100] pci 0000:00:1c.1: bridge window [mem 0x80300000-0x804fffff 64bit pref] [ 0.326107] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.326111] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 0.326117] pci 0000:00:1c.2: bridge window [mem 0x80500000-0x806fffff] [ 0.326122] pci 0000:00:1c.2: bridge window [mem 0x80700000-0x808fffff 64bit pref] [ 0.326130] pci 0000:00:1c.3: PCI bridge to [bus 05-07] [ 0.326134] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.326140] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.326145] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.326152] pci 0000:00:1c.4: PCI bridge to [bus 08-0a] [ 0.326156] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.326163] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.326168] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.326175] pci 0000:00:1e.0: PCI bridge to [bus 0d] [ 0.326567] pci 0000:00:1e.0: setting latency timer to 64 [ 0.326572] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.326575] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.326578] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.326581] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.326584] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.326587] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.326590] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff] [ 0.326593] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff] [ 0.326596] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.326599] pci_bus 0000:02: resource 1 [mem 0xf8500000-0xf85fffff] [ 0.326602] pci_bus 0000:02: resource 2 [mem 0x80000000-0x802fffff pref] [ 0.326605] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.326608] pci_bus 0000:03: resource 1 [mem 0xf8600000-0xf86fffff] [ 0.326611] pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref] [ 0.326614] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.326617] pci_bus 0000:04: resource 1 [mem 0x80500000-0x806fffff] [ 0.326620] pci_bus 0000:04: resource 2 [mem 0x80700000-0x808fffff 64bit pref] [ 0.326623] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.326625] pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf5ffffff] [ 0.326628] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.326631] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff] [ 0.326634] pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.326637] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.326640] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] [ 0.326643] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff] [ 0.326646] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff] [ 0.326649] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.326652] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.326655] pci_bus 0000:0d: resource 9 [mem 0x000dc000-0x000dffff] [ 0.326658] pci_bus 0000:0d: resource 10 [mem 0x000e0000-0x000e3fff] [ 0.326661] pci_bus 0000:0d: resource 11 [mem 0x80000000-0xfebfffff] [ 0.326697] NET: Registered protocol family 2 [ 0.326876] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.326904] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.326933] TCP: Hash tables configured (established 8192 bind 8192) [ 0.326966] TCP: reno registered [ 0.326970] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.326981] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.327057] NET: Registered protocol family 1 [ 0.327073] pci 0000:00:02.0: Boot video device [ 0.328372] PCI: CLS 64 bytes, default 64 [ 0.328419] Unpacking initramfs... [ 0.665903] Freeing initrd memory: 12032k freed [ 0.673483] Simple Boot Flag at 0x57 set to 0x1 [ 0.673866] audit: initializing netlink socket (disabled) [ 0.673883] type=2000 audit(1376132405.672:1): initialized [ 0.674207] bounce pool size: 64 pages [ 0.674221] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.675865] VFS: Disk quotas dquot_6.5.2 [ 0.675923] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.676070] msgmni has been set to 1731 [ 0.676373] alg: No test for stdrng (krng) [ 0.676382] Key type asymmetric registered [ 0.676385] Asymmetric key parser 'x509' registered [ 0.676430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.676466] io scheduler noop registered [ 0.676468] io scheduler deadline registered [ 0.676500] io scheduler cfq registered (default) [ 0.676616] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.676695] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.676771] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.676843] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.676921] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.677109] intel_idle: does not run on family 6 model 15 [ 0.677141] GHES: HEST is not enabled! [ 0.677198] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.677789] Linux agpgart interface v0.103 [ 0.677893] libphy: Fixed MDIO Bus: probed [ 0.677938] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.698450] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.698479] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.698558] mousedev: PS/2 mouse device common for all mice [ 0.699558] rtc_cmos 00:07: RTC can wake from S4 [ 0.699686] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.699713] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.699733] cpuidle: using governor ladder [ 0.699735] cpuidle: using governor menu [ 0.700184] TCP: cubic registered [ 0.700296] NET: Registered protocol family 10 [ 0.700521] Key type dns_resolver registered [ 0.700650] Using IPI No-Shortcut mode [ 0.700752] registered taskstats version 1 [ 0.700860] IMA: No TPM chip found, activating TPM-bypass! [ 0.701517] rtc_cmos 00:07: setting system clock to 2013-08-10 11:00:06 UTC (1376132406) [ 0.701662] Freeing unused kernel memory: 404k freed [ 0.719902] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.724165] dracut: dracut-7 (wheezy) dracut- [ 0.744347] device-mapper: uevent: version 1.0.3 [ 0.744443] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 0.749350] udevd[97]: starting version 175 [ 0.820077] ACPI: bus type USB registered [ 0.820184] usbcore: registered new interface driver usbfs [ 0.820198] usbcore: registered new interface driver hub [ 0.822586] usbcore: registered new device driver usb [ 0.822934] uhci_hcd: USB Universal Host Controller Interface driver [ 0.823104] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.823110] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.823118] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.823163] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.823208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.823211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.823214] usb usb1: Product: UHCI Host Controller [ 0.823217] usb usb1: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd [ 0.823220] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.823363] hub 1-0:1.0: USB hub found [ 0.823370] hub 1-0:1.0: 2 ports detected [ 0.823587] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.823592] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.823601] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 0.823627] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.823666] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.823670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.823673] usb usb2: Product: UHCI Host Controller [ 0.823675] usb usb2: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd [ 0.823678] usb usb2: SerialNumber: 0000:00:1a.1 [ 0.823811] hub 2-0:1.0: USB hub found [ 0.823817] hub 2-0:1.0: 2 ports detected [ 0.824069] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.824075] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.824083] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 0.824111] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.824152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.824155] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.824158] usb usb3: Product: UHCI Host Controller [ 0.824161] usb usb3: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd [ 0.824163] usb usb3: SerialNumber: 0000:00:1a.2 [ 0.824307] hub 3-0:1.0: USB hub found [ 0.824313] hub 3-0:1.0: 2 ports detected [ 0.824523] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.824529] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.824536] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.824578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.824623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.824626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.824629] usb usb4: Product: UHCI Host Controller [ 0.824632] usb usb4: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd [ 0.824635] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.824778] hub 4-0:1.0: USB hub found [ 0.824784] hub 4-0:1.0: 2 ports detected [ 0.824995] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.825000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.825026] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 0.825067] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.825108] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.825111] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.825114] usb usb5: Product: UHCI Host Controller [ 0.825117] usb usb5: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd [ 0.825120] usb usb5: SerialNumber: 0000:00:1d.1 [ 0.825258] hub 5-0:1.0: USB hub found [ 0.825264] hub 5-0:1.0: 2 ports detected [ 0.825483] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.825488] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.825496] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 0.825537] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.825580] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.825583] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.825586] usb usb6: Product: UHCI Host Controller [ 0.825589] usb usb6: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd [ 0.825592] usb usb6: SerialNumber: 0000:00:1d.2 [ 0.825757] hub 6-0:1.0: USB hub found [ 0.825763] hub 6-0:1.0: 2 ports detected [ 0.852503] SCSI subsystem initialized [ 0.854141] ACPI: bus type ATA registered [ 0.858403] libata version 3.00 loaded. [ 0.858792] ata_piix 0000:00:1f.2: version 2.13 [ 0.858912] ata_piix 0000:00:1f.2: MAP [ [ 0.858914] P0 -- P1 -- ] [ 0.858968] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.860691] scsi0 : ata_piix [ 0.860806] scsi1 : ata_piix [ 0.860861] ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19 [ 0.860866] ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19 [ 0.861071] ata_piix 0000:00:1f.5: MAP [ [ 0.861073] P0 -- P1 -- ] [ 0.861126] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.861355] scsi2 : ata_piix [ 0.861430] scsi3 : ata_piix [ 0.861484] ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19 [ 0.861489] ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19 [ 1.125022] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 1.178845] ata3: SATA link down (SStatus 0 SControl 300) [ 1.189698] ata4: SATA link down (SStatus 0 SControl 300) [ 1.316054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.318049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.319342] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.319346] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 1.321139] ata2.00: ATAPI: Optiarc DVD RW AD-7590S, 1.B0, max UDMA/100 [ 1.325754] ata1.00: configured for UDMA/133 [ 1.325889] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.327144] ata2.00: configured for UDMA/100 [ 1.335443] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7590S 1.B0 PQ: 0 ANSI: 5 [ 1.341829] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.341922] sd 0:0:0:0: [sda] Write Protect is off [ 1.341926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.341962] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.345676] usb 2-1: New USB device found, idVendor=064e, idProduct=a103 [ 1.345681] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1.345684] usb 2-1: Product: Acer Crystal Eye webcam [ 1.345687] usb 2-1: Manufacturer: SuYin [ 1.345689] usb 2-1: SerialNumber: CN0314-SN30-OV03-VA-R02.03.02 [ 1.351038] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.351042] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.351255] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.404679] sda: sda1 sda2 < sda5 sda6 > [ 1.405209] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.456024] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 1.616155] usb 3-1: New USB device found, idVendor=0bda, idProduct=0158 [ 1.616160] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.616163] usb 3-1: Product: USB2.0-CRW [ 1.616166] usb 3-1: Manufacturer: Generic [ 1.616169] usb 3-1: SerialNumber: 20071114173400000 [ 1.629449] usbcore: registered new interface driver usb-storage [ 1.629890] ums-realtek 3-1:1.0: USB Mass Storage device detected [ 1.637194] scsi4 : usb-storage 3-1:1.0 [ 1.637290] usbcore: registered new interface driver ums-realtek [ 1.675023] tsc: Refined TSC clocksource calibration: 2161.249 MHz [ 1.675029] Switching to clocksource tsc [ 1.892743] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 1.965139] dracut: Checking ext4: /dev/disk/by-uuid/fddcf712-2c23-4a16-b73b-cce3c8b00536 [ 1.965194] dracut: issuing e2fsck -a /dev/disk/by-uuid/fddcf712-2c23-4a16-b73b-cce3c8b00536 [ 2.034725] dracut: /dev/disk/by-uuid/fddcf712-2c23-4a16-b73b-cce3c8b00536: clean, 123691/14032896 files, 1985399/56101376 blocks [ 2.034976] dracut: Remounting /dev/disk/by-uuid/fddcf712-2c23-4a16-b73b-cce3c8b00536 with -o errors=remount-ro,ro [ 2.106030] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.152182] dracut: Mounted root filesystem /dev/sda5 [ 2.279793] dracut: Switching root [ 2.643177] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 2.653161] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 3.971745] udevd[440]: starting version 175 [ 4.601307] wmi: Mapper loaded [ 4.611697] ACPI: AC Adapter [ADP1] (on-line) [ 4.635165] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1 [ 4.652042] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1 [ 4.652104] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 4.820804] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 4.822347] ACPI: Lid Switch [LID0] [ 4.822430] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 4.822485] ACPI: Sleep Button [SLPB] [ 4.822547] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.822586] ACPI: Power Button [PWRF] [ 4.846809] ACPI: Requesting acpi_cpufreq [ 4.851312] Monitor-Mwait will be used to enter C-1 state [ 4.851321] Monitor-Mwait will be used to enter C-2 state [ 4.851326] tsc: Marking TSC unstable due to TSC halts in idle [ 4.851337] ACPI: acpi_idle registered with cpuidle [ 4.851364] Switching to clocksource hpet [ 5.022952] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.022957] ACPI: Thermal Zone [TZS0] (66 C) [ 5.033645] ACPI: Battery Slot [BAT0] (battery present) [ 5.046193] thermal LNXTHERM:01: registered as thermal_zone1 [ 5.046197] ACPI: Thermal Zone [TZS1] (68 C) [ 5.065240] ACPI Warning: 0x00001c00-0x00001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251) [ 5.065248] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.073368] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.205768] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.205771] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 5.225462] media: Linux media interface: v0.10 [ 5.225589] ehci-pci: EHCI PCI platform driver [ 5.225747] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 5.246177] usb 2-1: USB disconnect, device number 2 [ 5.246669] usb 3-1: USB disconnect, device number 2 [ 5.247648] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 5.247659] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 5.247676] ehci-pci 0000:00:1a.7: debug port 1 [ 5.251604] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 5.251618] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf8904000 [ 5.257039] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 5.257068] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.257072] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.257075] usb usb7: Product: EHCI Host Controller [ 5.257078] usb usb7: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 ehci_hcd [ 5.257080] usb usb7: SerialNumber: 0000:00:1a.7 [ 5.257240] hub 7-0:1.0: USB hub found [ 5.257247] hub 7-0:1.0: 6 ports detected [ 5.278068] hub 1-0:1.0: USB hub found [ 5.278074] hub 1-0:1.0: 2 ports detected [ 5.299105] hub 2-0:1.0: USB hub found [ 5.299113] hub 2-0:1.0: 2 ports detected [ 5.320103] hub 3-0:1.0: USB hub found [ 5.320111] hub 3-0:1.0: 2 ports detected [ 5.320340] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 5.383160] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 5.383173] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 5.383192] ehci-pci 0000:00:1d.7: debug port 1 [ 5.387094] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 5.387105] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8904400 [ 5.393034] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.393058] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.393062] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.393065] usb usb8: Product: EHCI Host Controller [ 5.393068] usb usb8: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 ehci_hcd [ 5.393071] usb usb8: SerialNumber: 0000:00:1d.7 [ 5.393233] hub 8-0:1.0: USB hub found [ 5.393239] hub 8-0:1.0: 6 ports detected [ 5.401712] [drm] Initialized drm 1.1.0 20060810 [ 5.402323] cfg80211: Calling CRDA to update world regulatory domain [ 5.414085] hub 4-0:1.0: USB hub found [ 5.414094] hub 4-0:1.0: 2 ports detected [ 5.435083] hub 5-0:1.0: USB hub found [ 5.435091] hub 5-0:1.0: 2 ports detected [ 5.456086] hub 6-0:1.0: USB hub found [ 5.456094] hub 6-0:1.0: 2 ports detected [ 5.461894] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) [ 5.461903] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.461908] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 5.461913] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.461915] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 5.461920] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.461922] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.473906] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 5.474054] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 5.474546] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 5.474851] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 5.482828] acer_wmi: Acer Laptop ACPI-WMI Extras [ 5.493730] acer_wmi: Function bitmap for Communication Device: 0x0 [ 5.494266] acer_wmi: Brightness must be controlled by acpi video driver [ 5.494466] input: Acer BMA150 accelerometer as /devices/virtual/input/input5 [ 5.507961] iTCO_vendor_support: vendor-support=0 [ 5.508513] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.508551] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 5.508684] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.535333] Linux video capture interface: v2.00 [ 5.559046] usb 7-3: new high-speed USB device number 2 using ehci-pci [ 5.713434] usb 7-3: New USB device found, idVendor=064e, idProduct=a103 [ 5.713439] usb 7-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 5.713442] usb 7-3: Product: Acer Crystal Eye webcam [ 5.713445] usb 7-3: Manufacturer: SuYin [ 5.713447] usb 7-3: SerialNumber: CN0314-SN30-OV03-VA-R02.03.02 [ 5.818051] usb 7-5: new high-speed USB device number 3 using ehci-pci [ 5.884996] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103) [ 5.901449] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/7-3:1.0/input/input6 [ 5.901540] usbcore: registered new interface driver uvcvideo [ 5.901543] USB Video Class driver (1.1.1) [ 5.923887] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 5.923891] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 5.924125] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 5.943803] usb 7-5: New USB device found, idVendor=0bda, idProduct=0158 [ 5.943807] usb 7-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.943810] usb 7-5: Product: USB2.0-CRW [ 5.943813] usb 7-5: Manufacturer: Generic [ 5.943815] usb 7-5: SerialNumber: 20071114173400000 [ 5.945886] sky2: driver version 1.30 [ 5.946170] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 5.946635] sky2 0000:02:00.0: irq 45 for MSI/MSI-X [ 5.947728] sky2 0000:02:00.0 eth0: addr 00:1d:72:ef:13:95 [ 5.948594] ums-realtek 7-5:1.0: USB Mass Storage device detected [ 5.959600] scsi5 : usb-storage 7-5:1.0 [ 5.975268] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 5.975288] iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 5.975383] iwl4965 0000:03:00.0: irq 46 for MSI/MSI-X [ 6.037904] [drm] Memory usable by graphics device = 2048M [ 6.037914] i915 0000:00:02.0: setting latency timer to 64 [ 6.038121] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 6.038131] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.038133] [drm] Driver supports precise vblank timestamp query. [ 6.038190] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.094027] fbcon: inteldrmfb (fb0) is primary device [ 6.096770] i915: fixme: max PWM is zero [ 6.170261] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24 [ 6.372304] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 6.491291] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512 [ 6.566023] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 6.589922] Console: switching to colour frame buffer device 170x48 [ 6.595664] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.595667] i915 0000:00:02.0: registered panic notifier [ 6.627865] acpi device:02: registered as cooling_device2 [ 6.627967] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.628045] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 6.628154] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.926051] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 6.963440] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 6.969323] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 6.970973] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 6.971148] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.016163] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.016373] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.017123] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 9.362339] Adding 4045820k swap on /dev/sda6. Priority:-1 extents:1 across:4045820k FS [ 9.413940] EXT4-fs (sda5): re-mounted. Opts: (null) [ 9.997539] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 10.855250] loop: module loaded [ 12.876822] RPC: Registered named UNIX socket transport module. [ 12.876827] RPC: Registered udp transport module. [ 12.876829] RPC: Registered tcp transport module. [ 12.876830] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.943914] FS-Cache: Loaded [ 12.966343] FS-Cache: Netfs 'nfs' registered for caching [ 13.026947] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 16.995448] Bluetooth: Core ver 2.16 [ 16.995477] NET: Registered protocol family 31 [ 16.995479] Bluetooth: HCI device and connection manager initialized [ 16.995497] Bluetooth: HCI socket layer initialized [ 16.995500] Bluetooth: L2CAP socket layer initialized [ 16.995508] Bluetooth: SCO socket layer initialized [ 17.042755] Bluetooth: RFCOMM TTY layer initialized [ 17.042773] Bluetooth: RFCOMM socket layer initialized [ 17.042776] Bluetooth: RFCOMM ver 1.11 [ 17.156772] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.156776] Bluetooth: BNEP filters: protocol multicast [ 17.156788] Bluetooth: BNEP socket layer initialized [ 18.184727] lp: driver loaded but no devices found [ 18.823817] ppdev: user-space parallel port driver [ 19.482618] sky2 0000:02:00.0 eth0: enabling interface [ 19.482940] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.728000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.625115] NET: Registered protocol family 17 [ 25.110042] wlan0: authenticate with 4c:09:b4:1b:c2:7a [ 25.127676] wlan0: send auth to 4c:09:b4:1b:c2:7a (try 1/3) [ 25.130097] wlan0: authenticated [ 25.131035] wlan0: associate with 4c:09:b4:1b:c2:7a (try 1/3) [ 25.134945] wlan0: RX AssocResp from 4c:09:b4:1b:c2:7a (capab=0x431 status=0 aid=2) [ 25.165490] wlan0: associated [ 25.165550] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 33.876085] usb 8-1: new high-speed USB device number 2 using ehci-pci [ 33.991430] usb 8-1: New USB device found, idVendor=0421, idProduct=0302 [ 33.991435] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 33.991438] usb 8-1: Product: N8-00 [ 33.991441] usb 8-1: Manufacturer: Nokia [ 33.991444] usb 8-1: SerialNumber: 351661053060228 [ 34.102294] usbcore: registered new interface driver cdc_ether [ 34.150053] cdc_acm 8-1:1.1: ttyACM0: USB ACM device [ 34.150804] cdc_acm 8-1:1.3: ttyACM1: USB ACM device [ 34.151260] usbcore: registered new interface driver cdc_acm [ 34.151264] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 34.249056] usbcore: registered new interface driver rndis_host [ 34.329300] usbcore: registered new interface driver rndis_wlan [ 58.384017] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 58.386380] sd 5:0:0:0: [sdb] Asking for cache data failed [ 58.386385] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 110.094987] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 110.097353] sd 5:0:0:0: [sdb] Asking for cache data failed [ 110.097360] sd 5:0:0:0: [sdb] Assuming drive cache: write through root@localhost:/home/miczeb15#
Offline
#6 2013-08-10 11:08:55
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Telefon Nokia gdzie jest?
[ 33.876085] usb 8-1: new high-speed USB device number 2 using ehci-pci
[ 33.991430] usb 8-1: New USB device found, idVendor=0421, idProduct=0302
[ 33.991435] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 33.991438] usb 8-1: Product: N8-00
[ 33.991441] usb 8-1: Manufacturer: Nokia
[ 33.991444] usb 8-1: SerialNumber: 351661053060228
[ 34.102294] usbcore: registered new interface driver cdc_ether
[b][ 34.150053] cdc_acm 8-1:1.1: ttyACM0: USB ACM device[/b]
[b][ 34.150804] cdc_acm 8-1:1.3: ttyACM1: USB ACM device[/b]
[ 34.151260] usbcore: registered new interface driver cdc_acm
[ 34.151264] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 34.249056] usbcore: registered new interface driver rndis_host
[ 34.329300] usbcore: registered new interface driver rndis_wlan
[ 58.384017] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 58.386380] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 58.386385] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 110.094987] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 110.097353] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 110.097360] sd 5:0:0:0: [sdb] Assuming drive cache: write through
root@localhost:/home/miczeb15#[/quote]
Zobacz w /dev/ -czy pojawiają się urządzenia /dev/ttyACM*, i czy pojawił się jakiś napęd
/dev/sdb* - o ile to od Nokii.
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#7 2013-08-10 11:14:38
adi1423 - Użytkownik
- adi1423
- Użytkownik
- Zarejestrowany: 2013-04-20
Re: Telefon Nokia gdzie jest?
[quote=Jacekalex]
[ 33.876085] usb 8-1: new high-speed USB device number 2 using ehci-pci
[ 33.991430] usb 8-1: New USB device found, idVendor=0421, idProduct=0302
[ 33.991435] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 33.991438] usb 8-1: Product: N8-00
[ 33.991441] usb 8-1: Manufacturer: Nokia
[ 33.991444] usb 8-1: SerialNumber: 351661053060228
[ 34.102294] usbcore: registered new interface driver cdc_ether
[b][ 34.150053] cdc_acm 8-1:1.1: ttyACM0: USB ACM device[/b]
[b][ 34.150804] cdc_acm 8-1:1.3: ttyACM1: USB ACM device[/b]
[ 34.151260] usbcore: registered new interface driver cdc_acm
[ 34.151264] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 34.249056] usbcore: registered new interface driver rndis_host
[ 34.329300] usbcore: registered new interface driver rndis_wlan
[ 58.384017] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 58.386380] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 58.386385] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 110.094987] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 110.097353] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 110.097360] sd 5:0:0:0: [sdb] Assuming drive cache: write through
root@localhost:/home/miczeb15#[/quote]
Zobacz w /dev/ -czy pojawiają się urządzenia /dev/ttyACM*, i czy pojawił się jakiś napęd
/dev/sdb* - o ile to od Nokii.[/quote]
w /dev/ pojawiło się /dev/ttyACM0 /dev/ttyACM1 ale jak teraz tam wejść?Ostatnio edytowany przez adi1423 (2013-08-10 11:22:13)
Offline
#8 2013-08-10 11:34:19
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Telefon Nokia gdzie jest?
ttyACM* to jest port modemu wbudowanego w telefon.
Spróbuj zamontować ten napęd sdb - to może być ten telefon.
A na przyszłość, jak chcesz używać pod Linuxem komórki, to najpierw sprawdzaj, co ma odpowiedni support.
Możesz też spróbować program do obsługi Nokii - fabryczny, odpalić na Wine, może zobaczy telefon, dodawali go kiedyś na płytce do telefonu (w oryginalnym pudełku).
Inna opcja:
Jeśli ta Nokia chodzi na systemie Symbian (a podobno chodzi), to szukaj raczej sposobu na połączenie Symbian - Linux, nie wiem, czy jest w Debianie, ale w Gentoo mam taki programik:
Kod:
eix p3nfs
* app-pda/p3nfs
Available versions: ~5.19-r2
Homepage: http://www.koeniglich.de/p3nfs.html
Description: Symbian to Unix and Linux communication programZawsze możesz sobie poszukać paczki albo skompilować ze źródełka.
Albo poszukaj trochę drobnych na fona z Androidem, w tym zawsze znajdzie się jakiś program albo sposób, żeby dogadać się z Linuxem, bo w końcu dwa Pingwiny zawsze jakoś się porozumieją.
Np Motorola Defy - to jakieś 350 -390 zł, Defy+ ~500, podobnie modele innych producentów.
A jak starszy telefon, to najpierw się patrzy na stronie http://wammu.eu/phones/
a dopiero potem sięga do kieszeni. :D
To by było na tyle
;-)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#9 2013-08-10 12:02:19
adi1423 - Użytkownik
- adi1423
- Użytkownik
- Zarejestrowany: 2013-04-20
Re: Telefon Nokia gdzie jest?
[quote=Jacekalex]ttyACM* to jest port modemu wbudowanego w telefon.
Spróbuj zamontować ten napęd sdb - to może być ten telefon.
A na przyszłość, jak chcesz używać pod Linuxem komórki, to najpierw sprawdzaj, co ma odpowiedni support.
Możesz też spróbować program do obsługi Nokii - fabryczny, odpalić na Wine, może zobaczy telefon, dodawali go kiedyś na płytce do telefonu (w oryginalnym pudełku).
Inna opcja:
Jeśli ta Nokia chodzi na systemie Symbian (a podobno chodzi), to szukaj raczej sposobu na połączenie Symbian - Linux, nie wiem, czy jest w Debianie, ale w Gentoo mam taki programik:
Kod:
eix p3nfs
* app-pda/p3nfs
Available versions: ~5.19-r2
Homepage: http://www.koeniglich.de/p3nfs.html
Description: Symbian to Unix and Linux communication programZawsze możesz sobie poszukać paczki albo skompilować ze źródełka.
Albo poszukaj trochę drobnych na fona z Androidem, w tym zawsze znajdzie się jakiś program albo sposób, żeby dogadać się z Linuxem, bo w końcu dwa Pingwiny zawsze jakoś się porozumieją.
Np Motorola Defy - to jakieś 350 -390 zł, Defy+ ~500, podobnie modele innych producentów.
A jak starszy telefon, to najpierw się patrzy na stronie http://wammu.eu/phones/
a dopiero potem sięga do kieszeni. :D
To by było na tyle
;-)[/quote]
Nokia Pc Suite przez wine tego nie widzi
Offline
#10 2013-08-10 12:27:05
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Telefon Nokia gdzie jest?
To szukaj sposobu na połączenie na linii [url=http://pl.wikipedia.org/wiki/Symbian]Symbian[/url] - Linux.
Jeden przykładowy program już wskazałem, a to z pewnością nie jest jedyna możliwość.
Tu jest druga (a właściwie rozwinięcie pierwszej):
http://www.thinkwiki.org/wiki/How_to_setup_Bluetooth#Mounting_Symbian_Phones
Ale całego internetu nie zamierzam tutaj kopiować dlatego, że ktoś nie ma w zwyczaju myśleć samodzielnie. :D
To by było na tyle
;-)
Ostatnio edytowany przez Jacekalex (2013-08-10 12:33:47)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#11 2013-08-13 14:00:31
lukaz1987 - Członek DUG
- lukaz1987
- Członek DUG
- Zarejestrowany: 2008-08-12
Re: Telefon Nokia gdzie jest?
A w telefonie jaki masz ustawiony tryb połączenia USB?
Offline
#12 2013-08-13 16:19:51
adi1423 - Użytkownik
- adi1423
- Użytkownik
- Zarejestrowany: 2013-04-20
Re: Telefon Nokia gdzie jest?
[quote=lukaz1987]A w telefonie jaki masz ustawiony tryb połączenia USB?[/quote]
No tak, na windzie mi działało dobrze
Offline
#13 2013-08-13 21:34:11
lukaz1987 - Członek DUG
- lukaz1987
- Członek DUG
- Zarejestrowany: 2008-08-12
Re: Telefon Nokia gdzie jest?
W trybie połączenia USB ja mam do wyboru: PC Suite, magazyn masowy, przesyłanie zdjęć, transfer multimediów, połącz komputer z siecią. Aby telefon był wykrywany jako nośnik wybieram: magazyn masowy. Może w tej opcji telefonu masz coś innego zaznaczone.
Offline
#14 2013-08-15 16:52:59
adi1423 - Użytkownik
- adi1423
- Użytkownik
- Zarejestrowany: 2013-04-20
Re: Telefon Nokia gdzie jest?
[quote=lukaz1987]W trybie połączenia USB ja mam do wyboru: PC Suite, magazyn masowy, przesyłanie zdjęć, transfer multimediów, połącz komputer z siecią. Aby telefon był wykrywany jako nośnik wybieram: magazyn masowy. Może w tej opcji telefonu masz coś innego zaznaczone.[/quote]
a gdzie to dokłanie się zmienia?
Ostatnio edytowany przez adi1423 (2013-08-15 18:36:37)
Offline
#15 2013-08-15 19:43:10
Pavlo950 - człowiek pasjonat :D
#16 2013-08-18 20:05:04
lukaz1987 - Członek DUG
- lukaz1987
- Członek DUG
- Zarejestrowany: 2008-08-12
Re: Telefon Nokia gdzie jest?
Ja w swojej nokii e72 mam tak: MENU->Panel sterowania->Łącza->USB
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00011 | SET CHARSET latin2 |
| 0.00006 | SET NAMES latin2 |
| 0.00142 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.16.47.89' WHERE u.id=1 |
| 0.00074 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.16.47.89', 1732772227) |
| 0.00026 | SELECT * FROM punbb_online WHERE logged<1732771927 |
| 0.00061 | SELECT topic_id FROM punbb_posts WHERE id=238335 |
| 0.00005 | SELECT id FROM punbb_posts WHERE topic_id=24055 ORDER BY posted |
| 0.00030 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24055 AND t.moved_to IS NULL |
| 0.00023 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00243 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24055 ORDER BY p.id LIMIT 0,25 |
| 0.00075 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24055 |
| Total query time: 0.00696 s | |