Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2013-09-24 17:47:02

  DuchDucha - Użytkownik

DuchDucha
Użytkownik
Zarejestrowany: 2013-09-24

KDE a obciążenie RAMu

Po pierwsze witam wszystkich.

Mam takie pytanie. Od kilku lat mam zainstalowane KDE. Jest to moje ulubione środowisko i raczej nie chciałbym go zmieniać. Jednak po ostatnich aktualizacjach środowiska w testingu, bardzo wzrosło mi użycie ramu z 300 mb do 700 mb zaraz po uruchomieniu. Tyle samo zabiera mi zaraz po uruchomieniu Windows 8. Zrobiłem reinstalkę powyłączałem Nepomuka, efekty graficzne i chyba wszystko inne co przychodziło mi do głowy i ram zszedł do 600 mb. Ile zasobów powinno zużywać?

Z góry dzięki.

Ostatnio edytowany przez DuchDucha (2013-09-24 18:04:59)

Offline

 

#2  2013-09-24 19:42:48

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: KDE a obciążenie RAMu

A jaki dokładnie masz sprzęt?

Zdaje się, że GNU/Linux działa tak, że jeślii ma więcej dostępnego RAMu, to więcej do niego wrzuca.

// Jeśli masz większą ilość RAMu niż 2, to na Twoim miejscu nie martwiłbym się.

Ostatnio edytowany przez PavloAkaLogan (2013-09-24 19:43:34)

Offline

 

#3  2013-09-24 19:47:20

  azhag - Admin łajza

azhag
Admin łajza
Skąd: Warszawa
Zarejestrowany: 2005-11-15

Re: KDE a obciążenie RAMu

Pokaż wynik polecenia:

Kod:

free -m
Błogosławieni, którzy czynią FAQ.
[url=http://www.opencaching.pl]opencaching[/url] :: [url=http://dug.net.pl/sources.list]debian sources.list[/url] :: [url=http://www.linuxportal.pl/blogi/azhag/wpisy]coś jakby blog[/url] :: [url=http://dug.net.pl/]polski portal debiana[/url] :: linux user #403712

Offline

 

#4  2013-09-24 20:15:19

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: KDE a obciążenie RAMu

Stery do grafy zamknięte? Może masz takie coś: http://forum.dug.net.pl/viewtopic.php?id=23334

Offline

 

#5  2013-09-24 20:37:43

  DuchDucha - Użytkownik

DuchDucha
Użytkownik
Zarejestrowany: 2013-09-24

Re: KDE a obciążenie RAMu

Komputer to składak ze starszego sprzętu.

System Debian 64-bit z KDE
CPU Pentium Duo-Core E6600 3.06 GHz
RAM 2x2 Giga
Swap 2 Giga (wiem nie potrzeba, ale jest)
Grafika nVidia GeForce 9600 GT (aktualny sterownik pobrany se strony producenta i zainstalowany przez konsolę wczoraj)

Edit:

To są dane po ponownym uruchomieniu.

Kod:

~$ free -m
             total       used       free     shared    buffers     cached
Mem:          3022       1076       1946          0         41        378
-/+ buffers/cache:        655       2366
Swap:         1905          0       1905

Ostatnio edytowany przez DuchDucha (2013-09-24 20:45:00)

Offline

 

#6  2013-09-24 21:29:59

  dominbik - Członek DUG

dominbik
Członek DUG
Zarejestrowany: 2011-07-25

Re: KDE a obciążenie RAMu

Przydałaby się jakaś osoba z KDE. Więcej niż 600MB wydaje się dużo nawet jak na KDE. daj moze wynik

Kod:

ps axo %mem,comm,pid,euser | sort -nr | head -n 10
[img]http://img34.imageshack.us/img34/5092/zw9m.png[/img] [img]http://img29.imageshack.us/img29/219/pibw.png[/img]

Offline

 

#7  2013-09-24 22:54:30

  DuchDucha - Użytkownik

DuchDucha
Użytkownik
Zarejestrowany: 2013-09-24

Re: KDE a obciążenie RAMu

Kod:

~$ ps axo %mem,comm,pid,euser | sort -nr | head -n 10
 4.9 plasma-desktop   3113 mario
 2.4 lancelot         3181 mario
 2.4 kwin             3107 mario
 2.3 krunner          3172 mario
 1.9 Xorg             2560 root
 1.8 kmix             3178 mario
 1.7 kded4            2910 mario
 1.5 kopete           3187 mario
 1.5 konsole          3309 mario
 1.5 akonadi_mailfil  3236 mario

Offline

 

#8  2013-09-24 23:08:45

  greywolf - Użytkownik

greywolf
Użytkownik
Skąd: Ruda Śląska
Zarejestrowany: 2013-08-03

Re: KDE a obciążenie RAMu

Mi KDE na Sidzie zabiera tak z 350 do 450 MB, Iceweasel zabiera >1GB więc KDE to pikuś przy tym ;)

[b](...) the Linux philosophy is 'laugh in the face of danger'. Oops. Wrong one. 'Do it yourself'. That's it.[/b]

Offline

 

#9  2013-09-24 23:10:27

  Andrzej66 - Użytkownik

Andrzej66
Użytkownik
Skąd: Elbląg
Zarejestrowany: 2009-08-26

Re: KDE a obciążenie RAMu

Używam kde i raczej 600M to teraz norma. Akonadi i nepomuka mam wyłączonego i...

andrzej@leo-09:~$ free -m
             total       used       free     shared    buffers     cached
Mem:          3965        989       2975          0         35        395
-/+ buffers/cache:        558       3406
Swap:         1996          0       1996[/quote]
to raczej normalne bo i na lapku mam podobne osiągi. Jak zacznie mi brakować ram to uruchomię fluxboxa.
Procek AMD Athlon II X4 630 ram 4GB i GF 9500.(sterowniki zamknięte efekty pulpitu włączone).
System msc temu instalowany po padzie baracudy- debian-testing, wcześniej 3,5 roku aptosid kde. I wraz ze zmianami numerków w kde rośnie zapotrzebowanie na ram. Pozdrawiam

P.S. Ktoś kiedyś napisał mądre słowa na którymś forum linuksowym "ram niewykorzystany to ram zmarnowany"

Ostatnio edytowany przez Andrzej66 (2013-09-24 23:12:30)

Offline

 

#10  2013-09-24 23:23:38

  DuchDucha - Użytkownik

DuchDucha
Użytkownik
Zarejestrowany: 2013-09-24

Re: KDE a obciążenie RAMu

[quote=greywolf]Mi KDE na Sidzie zabiera tak z 350 do 450 MB, Iceweasel zabiera >1GB więc KDE to pikuś przy tym ;)[/quote]
Wolałbym mieć właśnie takie wyniki.

Jak naprawdę potrzebuję czegoś szybszego to przechodzę ma LXDE, ale to tylko chwilowe rozwiązanie.

Ostatnio edytowany przez DuchDucha (2013-09-24 23:24:13)

Offline

 

#11  2013-09-25 14:46:41

  drelbrown - Użytkownik

drelbrown
Użytkownik
Zarejestrowany: 2013-01-07

Re: KDE a obciążenie RAMu

U mnie jest tak na amd64:
-  119 MB z załadowanym KDM
-  379 MB KDE po uruchomieniu (na i386 będzie coś ok. 200 MB)


P.S.
Na Wheezy i386 miałem ok. 160 MB

Ostatnio edytowany przez drelbrown (2013-09-25 14:47:49)

Offline

 

#12  2013-09-26 16:57:39

  DuchDucha - Użytkownik

DuchDucha
Użytkownik
Zarejestrowany: 2013-09-24

Re: KDE a obciążenie RAMu

Tylko dlaczego mi tyle zżera? Może korzysta z jakichś dodatkowych opcji?

Offline

 

#13  2013-09-26 17:55:25

  greywolf - Użytkownik

greywolf
Użytkownik
Skąd: Ruda Śląska
Zarejestrowany: 2013-08-03

Re: KDE a obciążenie RAMu

A instalowaeś kde-full? Może coś tam jeszcze siedzi włączone

[b](...) the Linux philosophy is 'laugh in the face of danger'. Oops. Wrong one. 'Do it yourself'. That's it.[/b]

Offline

 

#14  2013-09-26 18:01:46

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: KDE a obciążenie RAMu

A masz z tego powodu jakiś problem, czy tylko tak sobie siedzisz i wpatrujesz się w cyferki?

Offline

 

#15  2013-09-26 20:47:53

  DuchDucha - Użytkownik

DuchDucha
Użytkownik
Zarejestrowany: 2013-09-24

Re: KDE a obciążenie RAMu

Zainstalowałem kde-standard i task. Może tu coś jest?

Zajmuję się trochę grafiką komputerową. O ile przy Gimpie to jeszcze nie jest jakiś szczególny problem, o tyle przy bardziej skomplikowanych rzeczach w Blenderze (nadal się go uczę) zauważam spowolnienie. Zwłaszcza jeśli jest też włączone Chromium.

Ostatnio edytowany przez DuchDucha (2013-09-26 20:49:02)

Offline

 

#16  2013-09-26 21:05:57

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: KDE a obciążenie RAMu

Większym problemem jest w tym przypadku Chromium.
Przy skomplikowanych rzeczach lepiej jednak pozamykać wszystko bo Twoja ilość pamięci nie musi wystarczać do takich zadań.

Gdy miałem KDE to użycie pamięci zależało od architektury, ilości dostępnej pamięci, konfiguracji jądra itp.
Na netbooku było to ok 150 MB, a na laptopie z 4 Gb Ramu ok 400-500. A Ty masz jeszcze zamknięte sterowniki, a to tez zwiększa użycie.

Reszta jest pobierana przez karte graficzną?

total
3022[/quote]
Pokaż zawartość Xorg.0.log

Offline

 

#17  2013-09-26 21:07:34

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: KDE a obciążenie RAMu

To zostaw to w spokoju i wrzuć fluxbox'a. Skonfigurujesz w godzinę maks i będziesz miał spokój.

Offline

 

#18  2013-09-26 21:52:40

  DuchDucha - Użytkownik

DuchDucha
Użytkownik
Zarejestrowany: 2013-09-24

Re: KDE a obciążenie RAMu

Kod:

[    15.261] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    15.261] X Protocol Version 11, Revision 0
[    15.261] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[    15.261] Current Operating System: Linux nadia 3.10-3-amd64 #1 SMP Debian 3.10.11-1 (2013-09-10) x86_64
[    15.261] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10-3-amd64 root=UUID=816a4700-02cd-487a-80d8-bddee3459042 ro quiet
[    15.261] Build Date: 17 April 2013  10:22:47AM
[    15.261] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>) 
[    15.261] Current version of pixman: 0.30.2
[    15.261]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    15.261] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.261] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 26 08:55:11 2013
[    15.273] (==) Using config file: "/etc/X11/xorg.conf"
[    15.273] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.305] (==) ServerLayout "Layout0"
[    15.305] (**) |-->Screen "Screen0" (0)
[    15.305] (**) |   |-->Monitor "Monitor0"
[    15.305] (**) |   |-->Device "Device0"
[    15.305] (**) |-->Input Device "Keyboard0"
[    15.305] (**) |-->Input Device "Mouse0"
[    15.305] (==) Automatically adding devices
[    15.305] (==) Automatically enabling devices
[    15.336] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.336]     Entry deleted from font path.
[    15.360] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    15.360]     Entry deleted from font path.
[    15.360] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    15.360] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.360] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.360] (WW) Disabling Keyboard0
[    15.360] (WW) Disabling Mouse0
[    15.360] (II) Loader magic: 0x7f042d86bae0
[    15.360] (II) Module ABI versions:
[    15.360]     X.Org ANSI C Emulation: 0.4
[    15.360]     X.Org Video Driver: 12.1
[    15.360]     X.Org XInput driver : 16.0
[    15.360]     X.Org Server Extension : 6.0
[    15.361] (--) PCI:*(0:1:0:0) 10de:0622:10b0:0401 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
[    15.361] (II) Open ACPI successful (/var/run/acpid.socket)
[    15.361] (II) LoadModule: "extmod"
[    15.388] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.396] (II) Module extmod: vendor="X.Org Foundation"
[    15.396]     compiled for 1.12.4, module version = 1.0.0
[    15.396]     Module class: X.Org Server Extension
[    15.396]     ABI class: X.Org Server Extension, version 6.0
[    15.396] (II) Loading extension SELinux
[    15.396] (II) Loading extension MIT-SCREEN-SAVER
[    15.396] (II) Loading extension XFree86-VidModeExtension
[    15.396] (II) Loading extension XFree86-DGA
[    15.396] (II) Loading extension DPMS
[    15.396] (II) Loading extension XVideo
[    15.396] (II) Loading extension XVideo-MotionCompensation
[    15.396] (II) Loading extension X-Resource
[    15.396] (II) LoadModule: "dbe"
[    15.396] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.406] (II) Module dbe: vendor="X.Org Foundation"
[    15.406]     compiled for 1.12.4, module version = 1.0.0
[    15.406]     Module class: X.Org Server Extension
[    15.406]     ABI class: X.Org Server Extension, version 6.0
[    15.406] (II) Loading extension DOUBLE-BUFFER
[    15.406] (II) LoadModule: "glx"
[    15.406] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.114] (II) Module glx: vendor="NVIDIA Corporation"
[    16.114]     compiled for 4.0.2, module version = 1.0.0
[    16.114]     Module class: X.Org Server Extension
[    16.114] (II) NVIDIA GLX Module  319.49  Tue Aug 13 19:53:22 PDT 2013
[    16.119] (II) Loading extension GLX
[    16.119] (II) LoadModule: "record"
[    16.119] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.130] (II) Module record: vendor="X.Org Foundation"
[    16.130]     compiled for 1.12.4, module version = 1.13.0
[    16.130]     Module class: X.Org Server Extension
[    16.130]     ABI class: X.Org Server Extension, version 6.0
[    16.130] (II) Loading extension RECORD
[    16.130] (II) LoadModule: "dri"
[    16.130] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.137] (II) Module dri: vendor="X.Org Foundation"
[    16.137]     compiled for 1.12.4, module version = 1.0.0
[    16.137]     ABI class: X.Org Server Extension, version 6.0
[    16.138] (II) Loading extension XFree86-DRI
[    16.138] (II) LoadModule: "dri2"
[    16.138] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.139] (II) Module dri2: vendor="X.Org Foundation"
[    16.139]     compiled for 1.12.4, module version = 1.2.0
[    16.139]     ABI class: X.Org Server Extension, version 6.0
[    16.139] (II) Loading extension DRI2
[    16.139] (II) LoadModule: "nvidia"
[    16.139] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    16.269] (II) Module nvidia: vendor="NVIDIA Corporation"
[    16.269]     compiled for 4.0.2, module version = 1.0.0
[    16.269]     Module class: X.Org Video Driver
[    16.289] (II) NVIDIA dlloader X Driver  319.49  Tue Aug 13 19:34:58 PDT 2013
[    16.289] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    16.290] (++) using VT number 7

[    16.321] (II) Loading sub module "fb"
[    16.321] (II) LoadModule: "fb"
[    16.321] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.332] (II) Module fb: vendor="X.Org Foundation"
[    16.332]     compiled for 1.12.4, module version = 1.0.0
[    16.332]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.332] (II) Loading sub module "wfb"
[    16.332] (II) LoadModule: "wfb"
[    16.332] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    16.344] (II) Module wfb: vendor="X.Org Foundation"
[    16.344]     compiled for 1.12.4, module version = 1.0.0
[    16.344]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.344] (II) Loading sub module "shadow"
[    16.344] (II) LoadModule: "shadow"
[    16.344] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    16.354] (II) Module shadow: vendor="X.Org Foundation"
[    16.354]     compiled for 1.12.4, module version = 1.1.0
[    16.354]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.354] (II) Loading sub module "ramdac"
[    16.354] (II) LoadModule: "ramdac"
[    16.354] (II) Module "ramdac" already built-in
[    16.357] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    16.357] (==) NVIDIA(0): RGB weight 888
[    16.357] (==) NVIDIA(0): Default visual is TrueColor
[    16.357] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    16.357] (**) NVIDIA(0): Enabling 2D acceleration
[    17.442] drmOpenDevice: node name is /dev/dri/card0
[    17.442] drmOpenDevice: open result is 15, (OK)
[    17.442] drmOpenByBusid: Searching for BusID PCI:1:0:0
[    17.442] drmOpenDevice: node name is /dev/dri/card0
[    17.442] drmOpenDevice: open result is 15, (OK)
[    17.442] drmOpenByBusid: drmOpenMinor returns 15
[    17.442] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    17.546] (II) NVIDIA(GPU-0): Display (BenQ FP91GP (DFP-0)) does not support NVIDIA 3D
[    17.546] (II) NVIDIA(GPU-0):     Vision stereo.
[    17.549] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[    17.549] (--) NVIDIA(0): Memory: 524288 kBytes
[    17.549] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.00
[    17.549] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    17.552] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[    17.552] (--) NVIDIA(0):     CRT-0
[    17.552] (--) NVIDIA(0):     CRT-1
[    17.552] (--) NVIDIA(0):     BenQ FP91GP (DFP-0) (boot, connected)
[    17.552] (--) NVIDIA(0):     DFP-1
[    17.552] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    17.552] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    17.552] (--) NVIDIA(0): BenQ FP91GP (DFP-0): 330.0 MHz maximum pixel clock
[    17.552] (--) NVIDIA(0): BenQ FP91GP (DFP-0): Internal Dual Link TMDS
[    17.552] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    17.552] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    17.552] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    17.552] (**) NVIDIA(0):     device BenQ FP91GP (DFP-0) (Using EDID frequencies has
[    17.552] (**) NVIDIA(0):     been enabled on all display devices.)
[    17.555] (==) NVIDIA(0): 
[    17.555] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    17.555] (==) NVIDIA(0):     will be used as the requested mode.
[    17.555] (==) NVIDIA(0): 
[    17.555] (II) NVIDIA(0): Validated MetaModes:
[    17.555] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select{}"
[    17.555] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[    17.584] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[    17.584] (--) NVIDIA(0):     option
[    17.584] (--) Depth 24 pixmap format is 32 bpp
[    17.584] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    17.591] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
[    17.647] (II) Loading extension NV-GLX
[    17.685] (==) NVIDIA(0): Disabling shared memory pixmaps
[    17.685] (==) NVIDIA(0): Backing store disabled
[    17.685] (==) NVIDIA(0): Silken mouse enabled
[    17.686] (**) NVIDIA(0): DPMS enabled
[    17.695] (II) Loading extension NV-CONTROL
[    17.695] (II) Loading extension XINERAMA
[    17.695] (II) Loading sub module "dri2"
[    17.695] (II) LoadModule: "dri2"
[    17.696] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.696] (II) Module dri2: vendor="X.Org Foundation"
[    17.696]     compiled for 1.12.4, module version = 1.2.0
[    17.696]     ABI class: X.Org Server Extension, version 6.0
[    17.696] (II) NVIDIA(0): [DRI2] Setup complete
[    17.696] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    17.696] (--) RandR disabled
[    17.696] (II) Initializing built-in extension Generic Event Extension
[    17.696] (II) Initializing built-in extension SHAPE
[    17.696] (II) Initializing built-in extension MIT-SHM
[    17.696] (II) Initializing built-in extension XInputExtension
[    17.696] (II) Initializing built-in extension XTEST
[    17.696] (II) Initializing built-in extension BIG-REQUESTS
[    17.696] (II) Initializing built-in extension SYNC
[    17.696] (II) Initializing built-in extension XKEYBOARD
[    17.696] (II) Initializing built-in extension XC-MISC
[    17.696] (II) Initializing built-in extension SECURITY
[    17.696] (II) Initializing built-in extension XINERAMA
[    17.696] (II) Initializing built-in extension XFIXES
[    17.696] (II) Initializing built-in extension RENDER
[    17.696] (II) Initializing built-in extension RANDR
[    17.696] (II) Initializing built-in extension COMPOSITE
[    17.696] (II) Initializing built-in extension DAMAGE
[    17.696] (II) SELinux: Disabled on system
[    17.698] (II) Initializing extension GLX
[    18.032] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.032] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.032] (II) LoadModule: "evdev"
[    18.036] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.049] (II) Module evdev: vendor="X.Org Foundation"
[    18.049]     compiled for 1.12.4, module version = 2.8.1
[    18.049]     Module class: X.Org XInput Driver
[    18.049]     ABI class: X.Org XInput driver, version 16.0
[    18.049] (II) Using input driver 'evdev' for 'Power Button'
[    18.049] (**) Power Button: always reports core events
[    18.049] (**) evdev: Power Button: Device: "/dev/input/event2"
[    18.049] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.049] (--) evdev: Power Button: Found keys
[    18.049] (II) evdev: Power Button: Configuring as keyboard
[    18.049] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    18.049] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.049] (**) Option "xkb_rules" "evdev"
[    18.049] (**) Option "xkb_model" "pc105"
[    18.049] (**) Option "xkb_layout" "pl"
[    18.080] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.080] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.080] (II) Using input driver 'evdev' for 'Power Button'
[    18.080] (**) Power Button: always reports core events
[    18.080] (**) evdev: Power Button: Device: "/dev/input/event1"
[    18.080] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.080] (--) evdev: Power Button: Found keys
[    18.080] (II) evdev: Power Button: Configuring as keyboard
[    18.080] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    18.080] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    18.080] (**) Option "xkb_rules" "evdev"
[    18.080] (**) Option "xkb_model" "pc105"
[    18.080] (**) Option "xkb_layout" "pl"
[    18.081] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[    18.081] (II) No input driver specified, ignoring this device.
[    18.081] (II) This device may have been added with another device file.
[    18.081] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event5)
[    18.081] (II) No input driver specified, ignoring this device.
[    18.081] (II) This device may have been added with another device file.
[    18.081] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6)
[    18.081] (II) No input driver specified, ignoring this device.
[    18.081] (II) This device may have been added with another device file.
[    18.082] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[    18.082] (II) No input driver specified, ignoring this device.
[    18.082] (II) This device may have been added with another device file.
[    18.082] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[    18.082] (II) No input driver specified, ignoring this device.
[    18.082] (II) This device may have been added with another device file.
[    18.083] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event9)
[    18.083] (II) No input driver specified, ignoring this device.
[    18.083] (II) This device may have been added with another device file.
[    18.083] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event10)
[    18.083] (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    18.083] (II) Using input driver 'evdev' for 'USB2.0 Camera'
[    18.083] (**) USB2.0 Camera: always reports core events
[    18.083] (**) evdev: USB2.0 Camera: Device: "/dev/input/event10"
[    18.083] (--) evdev: USB2.0 Camera: Vendor 0x1e4e Product 0x102
[    18.083] (--) evdev: USB2.0 Camera: Found keys
[    18.083] (II) evdev: USB2.0 Camera: Configuring as keyboard
[    18.083] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-5/5-5:1.0/input/input10/event10"
[    18.083] (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD, id 8)
[    18.083] (**) Option "xkb_rules" "evdev"
[    18.083] (**) Option "xkb_model" "pc105"
[    18.083] (**) Option "xkb_layout" "pl"
[    18.084] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    18.084] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.084] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.084] (**) AT Translated Set 2 keyboard: always reports core events
[    18.084] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    18.084] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    18.084] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    18.084] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    18.084] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    18.084] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    18.084] (**) Option "xkb_rules" "evdev"
[    18.084] (**) Option "xkb_model" "pc105"
[    18.084] (**) Option "xkb_layout" "pl"
[    18.085] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event11)
[    18.085] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    18.085] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    18.085] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[    18.085] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event11"
[    18.085] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[    18.085] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[    18.085] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[    18.085] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[    18.085] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[    18.085] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[    18.085] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[    18.085] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[    18.085] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.085] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    18.085] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[    18.085] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[    18.085] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[    18.085] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[    18.086] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[    18.086] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[    18.086] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[    18.086] (II) No input driver specified, ignoring this device.
[    18.086] (II) This device may have been added with another device file.
[    18.086] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    18.086] (II) No input driver specified, ignoring this device.
[    18.086] (II) This device may have been added with another device file.
[    32.360] (II) NVIDIA(GPU-0): Display (BenQ FP91GP (DFP-0)) does not support NVIDIA 3D
[    32.360] (II) NVIDIA(GPU-0):     Vision stereo.
[    32.360] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.360] (**) NVIDIA(0):     device BenQ FP91GP (DFP-0) (Using EDID frequencies has
[    32.360] (**) NVIDIA(0):     been enabled on all display devices.)
[    53.485] (II) NVIDIA(GPU-0): Display (BenQ FP91GP (DFP-0)) does not support NVIDIA 3D
[    53.485] (II) NVIDIA(GPU-0):     Vision stereo.
[    53.485] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    53.485] (**) NVIDIA(0):     device BenQ FP91GP (DFP-0) (Using EDID frequencies has
[    53.485] (**) NVIDIA(0):     been enabled on all display devices.)

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.015 seconds, 12 queries executed ]

Informacje debugowania

Time (s) Query
0.00017 SET CHARSET latin2
0.00006 SET NAMES latin2
0.00198 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.191.81.46' WHERE u.id=1
0.00143 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.191.81.46', 1732427643)
0.00051 SELECT * FROM punbb_online WHERE logged<1732427343
0.00124 DELETE FROM punbb_online WHERE ident='3.145.33.244'
0.00055 SELECT topic_id FROM punbb_posts WHERE id=241797
0.00168 SELECT id FROM punbb_posts WHERE topic_id=24303 ORDER BY posted
0.00107 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24303 AND t.moved_to IS NULL
0.00007 SELECT search_for, replace_with FROM punbb_censoring
0.00150 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24303 ORDER BY p.id LIMIT 0,25
0.00105 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24303
Total query time: 0.01131 s