Forum Debian Users Gang

tajwan · 2013-12-23 00:06:08

Jak można sprawdzić czy dysk jest sprawny?

morfik · 2013-12-23 00:11:46

Podłączyć do prądu? xD

tajwan · 2013-12-23 00:16:08

Ha ha. Chcę go sprawdzić ogólnie bo chyba coś go może boleć.

morfik · 2013-12-23 00:19:58

Po czym wnosisz?

tajwan · 2013-12-23 00:22:53

Bo system mam nie do końca sprawny. Różne rzeczy się dzieją z NN powodu.

fervi · 2013-12-23 00:32:47

Z Archiwum X

Tu-ru-du-du-du-duuuuu

Sprawdź Smartem (musisz podłączyć dysk)

Fervi

tajwan · 2013-12-23 00:39:44

Czemu tu tak zawsze jest jak człowiek pyta ile jest 2+2 to zamiast prosto wiedzieć mu że to jest 4. To mu jesteś równanie piszą .

fervi · 2013-12-23 00:44:21

[quote=tajwan]Czemu tu tak zawsze jest jak człowiek pyta ile jest 2+2 to zamiast prosto wiedzieć mu że to jest 4. To mu jesteś równanie piszą .[/quote]
Żeby do końca życia nie był idiotą i nauczył się liczyć samodzielnie?
Mogę ci powiedzieć ile to jest 2+2, potem 3+3, 4+4, ale jeśli nauczę cię dodawania to ty się czegoś nauczysz, a ja zyskam święty spokój

Fervi

tajwan · 2013-12-23 00:48:17

Zakładam, że dysk może być nie do końca sprawny z racji, że kom ogólnie dziwnie się zachowuje czasami przymula czasami przytnie czasem zwisa załapie a czasem w sysku słychać jak byś szpilką po szybie przejechał albo takie stukanie (właściwie dźwięk) jak by się wyłączał i włączał i tak kilka raz ale ponoś się nie wyłącza.

enether · 2013-12-23 00:52:01

Dobra, dam Ci gotowca.

Gdybyś miał GNOME rozwiązaniem najprostszym byłoby odpalenie polecenia

Kod:

palimpsest

i wyklikanie sobie testu.

A teraz wersja pr0:

Kod:

# aptitude install smartmontools
# smartctl -s on /dev/sda
# smartctl -t long /dev/sda
--- po zakończeniu testu ---
# smartctl -Ha /dev/sda

Zakładając że twój dysk jest widziany jako /dev/sda

Potem wrzuć nam wynik ostatniej komendy to ktoś w wolnej chwili go zinterpretuje.

PS. Stukanie i "dźwięk szpilki" sugerują że coś z głowicą i powierzchnią dysku może być nie tak. A to raczej bardzo złe objawy. Robisz backupy, co?

Ostatnio edytowany przez enether (2013-12-23 00:55:27)

tajwan · 2013-12-23 00:52:33

Mam gnome:P

Kod:

root@tajwan:/home/tajwan#  smartctl -s on /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

root@tajwan:/home/tajwan# smartctl -t long /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 70 minutes for test to complete.
Test will complete after Mon Dec 23 02:04:09 2013

Use smartctl -X to abort test.
root@tajwan:/home/tajwan#  smartctl -Ha /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD1200BEVS-22RST0
Serial Number:    WD-WXCX07074772
LU WWN Device Id: 5 0014ee 200a77063
Firmware Version: 04.01G04
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Dec 23 00:54:45 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249)    Self-test routine in progress...
                    90% of test remaining.
Total time to complete Offline 
data collection:         ( 5400) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  70) minutes.
Conveyance self-test routine
recommended polling time:      (   6) minutes.
SCT capabilities:            (0x103f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   197   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   187   184   021    Pre-fail  Always       -       1608
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       6287
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   076   076   000    Old_age   Always       -       17570
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6025
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       514
193 Load_Cycle_Count        0x0032   096   096   000    Old_age   Always       -       313820
194 Temperature_Celsius     0x0022   110   097   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 11 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:27.828  READ DMA
  ca 00 08 77 b2 ae 03 00      04:11:27.827  WRITE DMA
  c8 00 40 c7 c2 1b 03 00      04:11:27.827  READ DMA
  ca 00 09 bf 6d 66 02 00      04:11:27.827  WRITE DMA
  ca 00 02 bf 7a 6c 01 00      04:11:27.827  WRITE DMA

Error 10 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:24.655  READ DMA
  c8 00 40 87 c2 1b 03 00      04:11:24.654  READ DMA
  e7 00 00 00 00 00 00 00      04:11:24.654  FLUSH CACHE
  c8 00 80 af 62 53 09 00      04:11:24.653  READ DMA
  c8 00 40 47 c2 1b 03 00      04:11:24.653  READ DMA

Error 9 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:20.863  READ DMA
  c8 00 40 47 c0 1b 03 00      04:11:20.846  READ DMA
  ca 00 09 b7 7a 6c 01 00      04:11:20.846  WRITE DMA
  c8 00 08 9f 65 61 01 00      04:11:20.846  READ DMA
  c8 00 78 17 44 53 01 00      04:11:20.831  READ DMA

Error 8 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:17.666  READ DMA
  c8 00 40 07 c0 1b 03 00      04:11:17.658  READ DMA
  c8 00 80 1f 65 61 01 00      04:11:17.657  READ DMA
  c8 00 08 1f d2 f9 00 00      04:11:17.646  READ DMA
  c8 00 80 2f 63 53 09 00      04:11:17.646  READ DMA

Error 7 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 68 c7 63 53 09 00      04:11:05.987  READ DMA
  c8 00 40 e7 f6 1b 03 00      04:11:05.974  READ DMA
  ca 00 10 7f 30 54 02 00      04:11:05.974  WRITE DMA
  ca 00 80 5f 8e 04 01 00      04:11:05.973  WRITE DMA
  ca 00 80 df 8d 04 01 00      04:11:05.973  WRITE DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@tajwan:/home/tajwan#

Kod:

root@tajwan:/home/tajwan# palimpsest

(palimpsest:5207): Unique-GDBus-WARNING **: Unable to open a connection to the session bus: Połączenie jest zamknięte

(palimpsest:5207): GLib-GIO-CRITICAL **: g_dbus_connection_call_sync_internal: assertion `G_IS_DBUS_CONNECTION (connection)' failed
Naruszenie ochrony pamięci

Ostatnio edytowany przez tajwan (2013-12-23 00:59:21)

enether · 2013-12-23 00:59:09

root@tajwan:/home/tajwan# smartctl -t long /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
[b]Testing has begun.
Please wait 70 minutes for test to complete.
Test will complete after Mon Dec 23 02:04:09 2013[/b][/quote]
BTW: nawet mimo braku wyników testu z samego "samorzutnego" loga widać że na dysku coś się złego działo.
do tego ta liczba parkowań głowicy
193 Load_Cycle_Count 0x0032 096 096 000 Old_age Always - 313820[/quote]
Dla porównania z mojego twardziela
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 097 097 000 Old_age Always - 5483
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 075 075 000 Old_age Always - 11194
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 4251
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2980577368
193 Load_Cycle_Count 0x0012 094 094 000 Old_age Always - 69263
194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 (Min/Max 13/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0[/quote]
PS. palimpsesta odpalasz z normalnego usera ;)

Ostatnio edytowany przez enether (2013-12-23 01:05:42)

Offline

Time (s)	Query
0.00013	SET CHARSET latin2
0.00007	SET NAMES latin2
0.00187	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.116.14.12' WHERE u.id=1
0.00065	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.116.14.12', 1732699353)
0.00030	SELECT * FROM punbb_online WHERE logged<1732699053
0.00044	SELECT topic_id FROM punbb_posts WHERE id=249388
0.00032	SELECT id FROM punbb_posts WHERE topic_id=24881 ORDER BY posted
0.00037	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24881 AND t.moved_to IS NULL
0.00047	SELECT search_for, replace_with FROM punbb_censoring
0.00414	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24881 ORDER BY p.id LIMIT 0,25
0.00084	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24881
Total query time: 0.0096 s

Forum Debian Users Gang

Ogłoszenie

#1 2013-12-23 00:06:08

tajwan - boss

Sprawdzenie dysku.

#2 2013-12-23 00:11:46

morfik - Cenzor wirtualnego świata

Re: Sprawdzenie dysku.

#3 2013-12-23 00:16:08

tajwan - boss

Re: Sprawdzenie dysku.

#4 2013-12-23 00:19:58

morfik - Cenzor wirtualnego świata

Re: Sprawdzenie dysku.

#5 2013-12-23 00:22:53

tajwan - boss

Re: Sprawdzenie dysku.

#6 2013-12-23 00:32:47

fervi - Użytkownik

Re: Sprawdzenie dysku.

#7 2013-12-23 00:39:44

tajwan - boss

Re: Sprawdzenie dysku.

#8 2013-12-23 00:44:21

fervi - Użytkownik

Re: Sprawdzenie dysku.

#9 2013-12-23 00:48:17

tajwan - boss

Re: Sprawdzenie dysku.

#10 2013-12-23 00:52:01

enether - wiecznie niewyspany

Re: Sprawdzenie dysku.

Kod:

Kod:

#11 2013-12-23 00:52:33

tajwan - boss

Re: Sprawdzenie dysku.

Kod:

Kod:

#12 2013-12-23 00:59:09

enether - wiecznie niewyspany

Re: Sprawdzenie dysku.

#13 2013-12-23 01:08:01

tajwan - boss

Re: Sprawdzenie dysku.

#14 2013-12-23 01:10:06

enether - wiecznie niewyspany

Re: Sprawdzenie dysku.

#15 2013-12-23 01:16:30

menel - Użytkownik

Re: Sprawdzenie dysku.

#16 2013-12-23 02:07:44

morfik - Cenzor wirtualnego świata

Re: Sprawdzenie dysku.

#17 2013-12-23 03:50:57

tajwan - boss

Re: Sprawdzenie dysku.

Kod:

#18 2013-12-23 14:53:44

tajwan - boss

Re: Sprawdzenie dysku.

#19 2013-12-23 16:03:40

menel - Użytkownik

Re: Sprawdzenie dysku.

#20 2013-12-23 18:24:11

morfik - Cenzor wirtualnego świata

Re: Sprawdzenie dysku.

#21 2013-12-23 19:08:00

tajwan - boss

Re: Sprawdzenie dysku.

#22 2013-12-26 01:26:09

tajwan - boss

Re: Sprawdzenie dysku.

Kod:

#23 2013-12-26 11:29:04

Pavlo950 - człowiek pasjonat :D

Re: Sprawdzenie dysku.

#24 2013-12-26 13:58:44

tajwan - boss

Re: Sprawdzenie dysku.