Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
- Forum Debian Users Gang
- » Instalacja i podstawowa konfiguracja
- » Nowa karta grafiki GT630 i zawieszanie się systemu.
#1 2014-01-19 14:07:33
kocur87 - Użytkownik
- kocur87
- Użytkownik
- Zarejestrowany: 2013-11-30
Nowa karta grafiki GT630 i zawieszanie się systemu.
Zakupiłem nową kartę graficzną, GT630 zainstalowałem zamknięte sterowniki z repozytorium, wszystko działa, opengl smiga, ale co jakiś czas około 2 godzin korzystania z kompa, komputer zawiesza się, dźwięk się zacina, brak reakcji na myszkę i klawiaturę, brak możliwości przełączenia na konsolę, zostaje tylko reset, najczęściej dzieje się to gdy oglądam film np na youtube w trybie pełnego ekranu, lub jak gram w Quake 4 (wersja natywna). Wcześniej na karcie zintegrowanej nic się takiego nie działo, podejrzewam sterownik nvidii. Gdzie mogę sprawdzić w logach co się dzieje w momencie zwiasu. Dodam jeszcze że komputer przedmuchany, pasta pod procesorem wymieniona. Debian, wersja stabilna 7.2 środowisko Gnome 3 wersja flasha 11.2.202.335, przeglądarka IceWeasel 17.0.10.
Offline
#2 2014-01-19 14:12:21
marcin'82 - 
Użytkownik
- marcin'82
- Użytkownik
- Skąd: Sosnowiec
- Zarejestrowany: 2011-10-02
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Przejrzyj pliki:
Kod:
~/.xsession-errors
Kod:
/var/log/Xorg.0.log
Kod:
dmesg
Podaj wyniki:
Kod:
lspci -k | grep -A2 VGA
Kod:
dpkg -l | grep nvidia
Kod:
glxinfo | grep string
Ostatnio edytowany przez marcin'82 (2014-01-19 14:13:18)
marcin'82
Offline
#3 2014-01-19 14:26:16
Huk - Smoleńsk BULWA!
- Huk
- Smoleńsk BULWA!
- Zarejestrowany: 2006-11-08
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Dorzuciłbym jeszcze uname -r jako że od jajca 3.10 wzwyż z Nvidią są jajca - co najmniej na lapkach. Przy czym to raczej dzieje się podczas initializacji karty (w dmesg dostajesz komunikat w stylu:
NVRM: GPU at 0000:01:00.0 has fallen off the bus.[/quote]
Być może najnowsze stery to poprawiły -nie wiem.
Komp to stacjonarka tak? Jaka karta była wcześniej i jaki masz zasilacz? Może nie wyrabia.
Offline
#4 2014-01-19 15:18:14
krasnij - oj tam
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Miałem 2 przypadki, gdzie na Debianie Wheezy z kernelem 3.2, nvidia wieszała kompa. Zainstaluj nowsze jajo.
Pozdrawiam i życzę sukcesów :)
[url=https://pgp.mit.edu/pks/lookup?op=get&search=0xA0C69B3CD46838AF]Mój Public Key[/url]
[url=http://www.keros-it.com]Serwis komputerowy i elektroniczny - Świdwin[/url]
The truth is out there
Offline
#5 2014-01-20 22:00:28
kocur87 - Użytkownik
- kocur87
- Użytkownik
- Zarejestrowany: 2013-11-30
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Komp stacjonarny, zasilacz 400W, karta raczej z niskiej pułki i nie ma dodatkowego zasilania więc myślę ze spokojnie wystarczy taki zasilacz. Widzę że nie ma to znaczenia czy gram czy oglądam film, czy czytam forum po prostu się zawiesza. uname -r : 3.2.0-4-amd64 czyli jajko 3.2
~/.xsession-errors
Kod:
/etc/gdm3/Xsession: Beginning session setup... localuser:kocur87 being added to access control list openConnection: connect: Nie ma takiego pliku ani katalogu cannot connect to brltty at :0 GNOME_KEYRING_CONTROL=/home/kocur87/.cache/keyring-YqHJgu GPG_AGENT_INFO=/home/kocur87/.cache/keyring-YqHJgu/gpg:0:1 GNOME_KEYRING_CONTROL=/home/kocur87/.cache/keyring-YqHJgu GPG_AGENT_INFO=/home/kocur87/.cache/keyring-YqHJgu/gpg:0:1 GNOME_KEYRING_CONTROL=/home/kocur87/.cache/keyring-YqHJgu GPG_AGENT_INFO=/home/kocur87/.cache/keyring-YqHJgu/gpg:0:1 GNOME_KEYRING_CONTROL=/home/kocur87/.cache/keyring-YqHJgu GPG_AGENT_INFO=/home/kocur87/.cache/keyring-YqHJgu/gpg:0:1 SSH_AUTH_SOCK=/home/kocur87/.cache/keyring-YqHJgu/ssh ** Message: applet now removed from the notification area Conky: forked to background, pid is 3689 Conky: desktop window (291) is root window Conky: window type - normal Conky: drawing to created window (0x1800002) Conky: drawing to double buffer Initializing tracker-store... Initializing tracker-miner-fs... Tracker-Message: Setting up monitor for changes to config file:'/home/kocur87/.config/tracker/tracker-store.cfg' Tracker-Message: Setting up monitor for changes to config file:'/home/kocur87/.config/tracker/tracker-miner-fs.cfg' Initializing nautilus-gdu extension ** (nautilus:3670): WARNING **: Can not determine workarea, guessing at layout Starting log: File:'/home/kocur87/.local/share/tracker/tracker-miner-fs.log' Tracker-Message: Setting up monitor for changes to config file:'/home/kocur87/.config/tracker/tracker-store.cfg' Starting log: File:'/home/kocur87/.local/share/tracker/tracker-store.log' Ostrzeżenie menedżera okien: Log level 6: Garbage collector went into timeout after 10 seconds x-session-manager[3541]: WARNING: Application 'gnome-shell.desktop' killed by signal 5 ** Message: applet now embedded in the notification area Ostrzeżenie menedżera okien: CurrentTime used to choose focus window; focus window may not be correct. Ostrzeżenie menedżera okien: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happeglxinfo | grep stringn! (transmission-gtk:3676): Gdk-CRITICAL **: gdk_window_thaw_toplevel_updates_libgtk_only: assertion `window->update_and_descendants_freeze_count > 0' failed ** Message: Stopping applet secret agent because GNOME Shell appeared Ostrzeżenie menedżera okien: CurrentTime used to choose focus window; focus window may not be correct. Ostrzeżenie menedżera okien: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen! (gnome-settings-daemon:3597): PackageKit-WARNING **: couldn't parse execption 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4: GetDistroUpgrades not supported by backend', please report (gnome-settings-daemon:3597): updates-plugin-WARNING **: failed to get upgrades: GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4: GetDistroUpgrades not supported by backend Ostrzeżenie menedżera okien: Log level 8: _shell_embedded_window_unrealize: assertion `SHELL_IS_EMBEDDED_WINDOW (window)' failed
/var/log/Xorg.0.log
Kod:
[ 16.960]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 16.960] X Protocol Version 11, Revision 0
[ 16.960] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[ 16.960] Current Operating System: Linux matrix 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64
[ 16.960] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7e3c4c47-4ebf-4e20-b2ee-9f03d56d0a22 ro quiet splash
[ 16.960] Build Date: 17 December 2013 07:37:58PM
[ 16.960] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>)
[ 16.960] Current version of pixman: 0.26.0
[ 16.960] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.960] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.960] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 20 22:27:26 2014
[ 17.106] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.106] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.171] (==) No Layout section. Using the first Screen section.
[ 17.171] (==) No screen section available. Using defaults.
[ 17.171] (**) |-->Screen "Default Screen Section" (0)
[ 17.171] (**) | |-->Monitor "<default monitor>"
[ 17.171] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 17.171] (**) | |-->Device "My GPU"
[ 17.171] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.171] (==) Automatically adding devices
[ 17.171] (==) Automatically enabling devices
[ 17.210] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 17.210] Entry deleted from font path.
[ 17.284] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 17.284] Entry deleted from font path.
[ 17.284] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 17.284] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.284] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.284] (II) Loader magic: 0x7f6c2380cae0
[ 17.284] (II) Module ABI versions:
[ 17.284] X.Org ANSI C Emulation: 0.4
[ 17.284] X.Org Video Driver: 12.1
[ 17.284] X.Org XInput driver : 16.0
[ 17.284] X.Org Server Extension : 6.0
[ 17.285] (--) PCI:*(0:1:0:0) 10de:0f00:1458:3544 rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, 0xe6000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[ 17.285] (II) Open ACPI successful (/var/run/acpid.socket)
[ 17.285] (II) LoadModule: "extmod"
[ 17.557] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 17.570] (II) Module extmod: vendor="X.Org Foundation"
[ 17.570] compiled for 1.12.4, module version = 1.0.0
[ 17.570] Module class: X.Org Server Extension
[ 17.570] ABI class: X.Org Server Extension, version 6.0
[ 17.570] (II) Loading extension SELinux
[ 17.570] (II) Loading extension MIT-SCREEN-SAVER
[ 17.570] (II) Loading extension XFree86-VidModeExtension
[ 17.570] (II) Loading extension XFree86-DGA
[ 17.570] (II) Loading extension DPMS
[ 17.570] (II) Loading extension XVideo
[ 17.570] (II) Loading extension XVideo-MotionCompensation
[ 17.570] (II) Loading extension X-Resource
[ 17.570] (II) LoadModule: "dbe"
[ 17.570] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 17.577] (II) Module dbe: vendor="X.Org Foundation"
[ 17.578] compiled for 1.12.4, module version = 1.0.0
[ 17.578] Module class: X.Org Server Extension
[ 17.578] ABI class: X.Org Server Extension, version 6.0
[ 17.578] (II) Loading extension DOUBLE-BUFFER
[ 17.578] (II) LoadModule: "glx"
[ 17.578] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 18.788] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.788] compiled for 4.0.2, module version = 1.0.0
[ 18.788] Module class: X.Org Server Extension
[ 18.788] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:46:57 PDT 2013
[ 18.788] (II) Loading extension GLX
[ 18.788] (II) LoadModule: "record"
[ 18.788] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 18.801] (II) Module record: vendor="X.Org Foundation"
[ 18.801] compiled for 1.12.4, module version = 1.13.0
[ 18.801] Module class: X.Org Server Extension
[ 18.801] ABI class: X.Org Server Extension, version 6.0
[ 18.801] (II) Loading extension RECORD
[ 18.801] (II) LoadModule: "dri"
[ 18.801] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.815] (II) Module dri: vendor="X.Org Foundation"
[ 18.815] compiled for 1.12.4, module version = 1.0.0
[ 18.815] ABI class: X.Org Server Extension, version 6.0
[ 18.815] (II) Loading extension XFree86-DRI
[ 18.815] (II) LoadModule: "dri2"
[ 18.815] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.816] (II) Module dri2: vendor="X.Org Foundation"
[ 18.816] compiled for 1.12.4, module version = 1.2.0
[ 18.816] ABI class: X.Org Server Extension, version 6.0
[ 18.816] (II) Loading extension DRI2
[ 18.816] (II) LoadModule: "nvidia"
[ 18.831] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.907] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.907] compiled for 4.0.2, module version = 1.0.0
[ 18.907] Module class: X.Org Video Driver
[ 18.943] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:28:14 PDT 2013
[ 18.943] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.952] (++) using VT number 8
[ 19.006] (II) Loading sub module "fb"
[ 19.006] (II) LoadModule: "fb"
[ 19.006] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.021] (II) Module fb: vendor="X.Org Foundation"
[ 19.021] compiled for 1.12.4, module version = 1.0.0
[ 19.021] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.021] (II) Loading sub module "wfb"
[ 19.021] (II) LoadModule: "wfb"
[ 19.021] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 19.031] (II) Module wfb: vendor="X.Org Foundation"
[ 19.031] compiled for 1.12.4, module version = 1.0.0
[ 19.031] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.031] (II) Loading sub module "ramdac"
[ 19.031] (II) LoadModule: "ramdac"
[ 19.031] (II) Module "ramdac" already built-in
[ 19.045] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.045] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 19.045] (==) NVIDIA(0): RGB weight 888
[ 19.045] (==) NVIDIA(0): Default visual is TrueColor
[ 19.045] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.045] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.804] (II) NVIDIA(GPU-0): Display (LG Electronics L194WT (CRT-1)) does not support
[ 19.804] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 20.593] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630 (GF108) at PCI:1:0:0 (GPU-0)
[ 20.593] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 20.593] (--) NVIDIA(0): VideoBIOS: 70.08.ad.00.01
[ 20.593] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 20.593] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 20.617] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630 at PCI:1:0:0
[ 20.617] (--) NVIDIA(0): CRT-0
[ 20.617] (--) NVIDIA(0): LG Electronics L194WT (CRT-1) (connected)
[ 20.617] (--) NVIDIA(0): DFP-0
[ 20.617] (--) NVIDIA(0): DFP-1
[ 20.617] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 20.617] (--) NVIDIA(0): LG Electronics L194WT (CRT-1): 400.0 MHz maximum pixel clock
[ 20.617] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 20.617] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 20.618] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 20.618] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 20.618] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 20.618] (**) NVIDIA(0): device LG Electronics L194WT (CRT-1) (Using EDID
[ 20.618] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 20.619] (==) NVIDIA(0):
[ 20.619] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 20.619] (==) NVIDIA(0): will be used as the requested mode.
[ 20.619] (==) NVIDIA(0):
[ 20.619] (II) NVIDIA(0): Validated MetaModes:
[ 20.619] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 20.619] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 20.660] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 20.660] (--) NVIDIA(0): option
[ 20.660] (--) Depth 24 pixmap format is 32 bpp
[ 20.660] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 20.660] (II) NVIDIA: access.
[ 20.666] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 20.741] (II) Loading extension NV-GLX
[ 20.855] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20.855] (==) NVIDIA(0): Backing store disabled
[ 20.855] (==) NVIDIA(0): Silken mouse enabled
[ 20.856] (==) NVIDIA(0): DPMS enabled
[ 20.856] (II) Loading extension NV-CONTROL
[ 20.856] (II) Loading extension XINERAMA
[ 20.856] (II) Loading sub module "dri2"
[ 20.856] (II) LoadModule: "dri2"
[ 20.856] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.856] (II) Module dri2: vendor="X.Org Foundation"
[ 20.856] compiled for 1.12.4, module version = 1.2.0
[ 20.856] ABI class: X.Org Server Extension, version 6.0
[ 20.856] (II) NVIDIA(0): [DRI2] Setup complete
[ 20.856] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20.856] (--) RandR disabled
[ 20.856] (II) Initializing built-in extension Generic Event Extension
[ 20.856] (II) Initializing built-in extension SHAPE
[ 20.856] (II) Initializing built-in extension MIT-SHM
[ 20.856] (II) Initializing built-in extension XInputExtension
[ 20.856] (II) Initializing built-in extension XTEST
[ 20.856] (II) Initializing built-in extension BIG-REQUESTS
[ 20.856] (II) Initializing built-in extension SYNC
[ 20.856] (II) Initializing built-in extension XKEYBOARD
[ 20.856] (II) Initializing built-in extension XC-MISC
[ 20.856] (II) Initializing built-in extension SECURITY
[ 20.856] (II) Initializing built-in extension XINERAMA
[ 20.856] (II) Initializing built-in extension XFIXES
[ 20.856] (II) Initializing built-in extension RENDER
[ 20.856] (II) Initializing built-in extension RANDR
[ 20.856] (II) Initializing built-in extension COMPOSITE
[ 20.856] (II) Initializing built-in extension DAMAGE
[ 20.857] (II) SELinux: Disabled on system
[ 20.858] (II) Initializing extension GLX
[ 21.322] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 21.322] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.322] (II) LoadModule: "evdev"
[ 21.322] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.337] (II) Module evdev: vendor="X.Org Foundation"
[ 21.337] compiled for 1.12.1, module version = 2.7.0
[ 21.337] Module class: X.Org XInput Driver
[ 21.337] ABI class: X.Org XInput driver, version 16.0
[ 21.337] (II) Using input driver 'evdev' for 'Power Button'
[ 21.337] (**) Power Button: always reports core events
[ 21.337] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 21.337] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.337] (--) evdev: Power Button: Found keys
[ 21.337] (II) evdev: Power Button: Configuring as keyboard
[ 21.337] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 21.337] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.337] (**) Option "xkb_rules" "evdev"
[ 21.337] (**) Option "xkb_model" "pc105"
[ 21.337] (**) Option "xkb_layout" "pl"
[ 21.357] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.357] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.357] (II) Using input driver 'evdev' for 'Power Button'
[ 21.357] (**) Power Button: always reports core events
[ 21.358] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 21.358] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.358] (--) evdev: Power Button: Found keys
[ 21.358] (II) evdev: Power Button: Configuring as keyboard
[ 21.358] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 21.358] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.358] (**) Option "xkb_rules" "evdev"
[ 21.358] (**) Option "xkb_model" "pc105"
[ 21.358] (**) Option "xkb_layout" "pl"
[ 21.358] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event6)
[ 21.358] (II) No input driver specified, ignoring this device.
[ 21.358] (II) This device may have been added with another device file.
[ 21.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[ 21.359] (II) No input driver specified, ignoring this device.
[ 21.359] (II) This device may have been added with another device file.
[ 21.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[ 21.359] (II) No input driver specified, ignoring this device.
[ 21.359] (II) This device may have been added with another device file.
[ 21.360] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[ 21.360] (II) No input driver specified, ignoring this device.
[ 21.360] (II) This device may have been added with another device file.
[ 21.360] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event5)
[ 21.360] (II) No input driver specified, ignoring this device.
[ 21.360] (II) This device may have been added with another device file.
[ 21.361] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.361] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.361] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.361] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.361] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.361] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.361] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.361] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.361] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.361] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 21.361] (**) Option "xkb_rules" "evdev"
[ 21.361] (**) Option "xkb_model" "pc105"
[ 21.361] (**) Option "xkb_layout" "pl"
[ 21.362] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
[ 21.362] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 21.362] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[ 21.362] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 21.362] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[ 21.362] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[ 21.362] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 21.362] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 21.362] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 21.362] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 21.362] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 21.362] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 21.362] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 21.362] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.362] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 21.362] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
[ 21.362] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 21.362] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 21.362] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 21.362] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 21.362] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 21.363] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 21.363] (II) No input driver specified, ignoring this device.
[ 21.363] (II) This device may have been added with another device file.
[ 21.363] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 21.363] (II) No input driver specified, ignoring this device.
[ 21.363] (II) This device may have been added with another device file.
[ 21.400] (II) NVIDIA(GPU-0): Display (LG Electronics L194WT (CRT-1)) does not support
[ 21.400] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 21.400] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 21.400] (**) NVIDIA(0): device LG Electronics L194WT (CRT-1) (Using EDID
[ 21.400] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 28.779] (II) NVIDIA(GPU-0): Display (LG Electronics L194WT (CRT-1)) does not support
[ 28.779] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 28.779] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 28.779] (**) NVIDIA(0): device LG Electronics L194WT (CRT-1) (Using EDID
[ 28.779] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 57.414] (II) NVIDIA(GPU-0): Display (LG Electronics L194WT (CRT-1)) does not support
[ 57.414] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 57.414] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 57.414] (**) NVIDIA(0): device LG Electronics L194WT (CRT-1) (Using EDID
[ 57.414] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 57.637] (II) NVIDIA(0): Setting mode "VGA-0: 1440x900_75 @1440x900 +0+0"
[ 60.320] (II) NVIDIA(GPU-0): Display (LG Electronics L194WT (CRT-1)) does not support
[ 60.320] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 60.320] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 60.320] (**) NVIDIA(0): device LG Electronics L194WT (CRT-1) (Using EDID
[ 60.320] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 63.797] (II) NVIDIA(GPU-0): Display (LG Electronics L194WT (CRT-1)) does not support
[ 63.797] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 63.797] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 63.797] (**) NVIDIA(0): device LG Electronics L194WT (CRT-1) (Using EDID
[ 63.797] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 63.813] (II) NVIDIA(GPU-0): Display (LG Electronics L194WT (CRT-1)) does not support
[ 63.813] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 63.813] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 63.813] (**) NVIDIA(0): device LG Electronics L194WT (CRT-1) (Using EDID
[ 63.813] (**) NVIDIA(0): frequencies has been enabled on all display devices.)Offline
#6 2014-01-20 22:04:22
kocur87 - Użytkownik
- kocur87
- Użytkownik
- Zarejestrowany: 2013-11-30
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
dmesg
Kod:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7e3c4c47-4ebf-4e20-b2ee-9f03d56d0a22 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) [ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/P5KPL-VM, BIOS 0507 11/20/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffa0000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffa0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffa0000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 36a84000 - 3753a000 [ 0.000000] ACPI: RSDP 00000000000fb7e0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000007ffa0000 0003C (v01 A_M_I_ OEMRSDT 11000720 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ffa0200 00084 (v02 A_M_I_ OEMFACP 11000720 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ffa05c0 06216 (v01 A0844 A0844000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 000000007ffae000 00040 [ 0.000000] ACPI: APIC 000000007ffa0390 0006C (v01 A_M_I_ OEMAPIC 11000720 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ffa0400 0003C (v01 A_M_I_ OEMMCFG 11000720 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ffae040 00080 (v01 A_M_I_ AMI_OEM 11000720 MSFT 00000097) [ 0.000000] ACPI: HPET 000000007ffa67e0 00038 (v01 A_M_I_ OEMHPET 11000720 MSFT 00000097) [ 0.000000] ACPI: GSCI 000000007ffae0c0 02024 (v01 A_M_I_ GMCHSCI 11000720 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ffa0000 [ 0.000000] Initmem setup node 0 0000000000000000-000000007ffa0000 [ 0.000000] NODE_DATA [000000007ff9b000 - 000000007ff9ffff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffa0 [ 0.000000] On node 0 totalpages: 524079 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 512985 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82944 r8192 d23552 u524288 [ 0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516907 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7e3c4c47-4ebf-4e20-b2ee-9f03d56d0a22 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2047704k/2096768k available (3426k kernel code, 452k absent, 48612k reserved, 3312k data, 576k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2600.230 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.46 BogoMIPS (lpj=10400920) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004046] Security Framework initialized [ 0.004051] AppArmor: AppArmor disabled by boot time parameter [ 0.004208] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004997] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.005383] Mount-cache hash table entries: 256 [ 0.005509] Initializing cgroup subsys cpuacct [ 0.005514] Initializing cgroup subsys memory [ 0.005525] Initializing cgroup subsys devices [ 0.005529] Initializing cgroup subsys freezer [ 0.005530] Initializing cgroup subsys net_cls [ 0.005532] Initializing cgroup subsys blkio [ 0.005539] Initializing cgroup subsys perf_event [ 0.005568] CPU: Physical Processor ID: 0 [ 0.005570] CPU: Processor Core ID: 0 [ 0.005572] mce: CPU supports 6 MCE banks [ 0.005579] CPU0: Thermal monitoring enabled (TM2) [ 0.005583] using mwait in idle threads. [ 0.005963] ACPI: Core revision 20110623 [ 0.010917] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050620] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.052002] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.052002] PEBS disabled due to CPU errata. [ 0.052002] ... version: 2 [ 0.052002] ... bit width: 40 [ 0.052002] ... generic registers: 2 [ 0.052002] ... value mask: 000000ffffffffff [ 0.052002] ... max period: 000000007fffffff [ 0.052002] ... fixed-purpose events: 3 [ 0.052002] ... event mask: 0000000700000003 [ 0.052002] NMI watchdog enabled, takes one hw-pmu counter. [ 0.052002] Booting Node 0, Processors #1 [ 0.052002] smpboot cpu 1: start_ip = 9a000 [ 0.140033] NMI watchdog enabled, takes one hw-pmu counter. [ 0.140065] Brought up 2 CPUs [ 0.140067] Total of 2 processors activated (10400.44 BogoMIPS). [ 0.140763] devtmpfs: initialized [ 0.142466] PM: Registering ACPI NVS region at 7ffae000 (204800 bytes) [ 0.142466] print_constraints: dummy: [ 0.142466] NET: Registered protocol family 16 [ 0.142466] ACPI: bus type pci registered [ 0.142466] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.142466] PCI: not using MMCONFIG [ 0.142466] PCI: Using configuration type 1 for base access [ 0.144362] bio: create slab <bio-0> at 0 [ 0.144362] ACPI: Added _OSI(Module Device) [ 0.144362] ACPI: Added _OSI(Processor Device) [ 0.144362] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.144362] ACPI: Added _OSI(Processor Aggregator Device) [ 0.144928] ACPI: EC: Look up EC in DSDT [ 0.146018] ACPI: Executed 1 blocks of module-level executable AML code [ 0.148696] ACPI: SSDT 000000007ffb00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.148925] ACPI: Dynamic OEM Table Load: [ 0.148927] ACPI: SSDT (null) 00214 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.149102] ACPI: SSDT 000000007ffb0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.149324] ACPI: Dynamic OEM Table Load: [ 0.149327] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.149575] ACPI: Interpreter enabled [ 0.149581] ACPI: (supports S0 S1 S3 S4 S5) [ 0.149602] ACPI: Using IOAPIC for interrupt routing [ 0.149623] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.150617] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.159914] ACPI: No dock devices found. [ 0.159917] HEST: Table not found. [ 0.159921] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.159984] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.160136] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.160139] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.160141] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.160144] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.160146] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored) [ 0.160156] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600 [ 0.160196] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604 [ 0.160231] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.160272] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.160285] pci 0000:00:1b.0: reg 10: [mem 0xfcffc000-0xfcffffff 64bit] [ 0.160344] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.160365] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.160425] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.160447] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.160507] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.160531] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.160566] pci 0000:00:1d.0: reg 20: [io 0xd480-0xd49f] [ 0.160594] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.160630] pci 0000:00:1d.1: reg 20: [io 0xd800-0xd81f] [ 0.160658] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.160693] pci 0000:00:1d.2: reg 20: [io 0xd880-0xd89f] [ 0.160722] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.160757] pci 0000:00:1d.3: reg 20: [io 0xdc00-0xdc1f] [ 0.160793] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.160810] pci 0000:00:1d.7: reg 10: [mem 0xfcffbc00-0xfcffbfff] [ 0.160883] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.160901] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.160959] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601 [ 0.161033] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.161073] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 [ 0.161084] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.161093] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.161101] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] [ 0.161109] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] [ 0.161117] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.161150] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101 [ 0.161162] pci 0000:00:1f.2: reg 10: [io 0xd400-0xd407] [ 0.161169] pci 0000:00:1f.2: reg 14: [io 0xd080-0xd083] [ 0.161176] pci 0000:00:1f.2: reg 18: [io 0xd000-0xd007] [ 0.161183] pci 0000:00:1f.2: reg 1c: [io 0xcc00-0xcc03] [ 0.161190] pci 0000:00:1f.2: reg 20: [io 0xc880-0xc88f] [ 0.161221] pci 0000:00:1f.2: PME# supported from D3hot [ 0.161235] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.161281] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.161344] pci 0000:01:00.0: [10de:0f00] type 0 class 0x000300 [ 0.161353] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.161363] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.161373] pci 0000:01:00.0: reg 1c: [mem 0xe6000000-0xe7ffffff 64bit pref] [ 0.161380] pci 0000:01:00.0: reg 24: [io 0xec00-0xec7f] [ 0.161387] pci 0000:01:00.0: reg 30: [mem 0xfe900000-0xfe97ffff pref] [ 0.161438] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403 [ 0.161447] pci 0000:01:00.1: reg 10: [mem 0xfe9fc000-0xfe9fffff] [ 0.161531] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.161534] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.161537] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfe9fffff] [ 0.161540] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bit pref] [ 0.161574] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 0.161634] pci 0000:02:00.0: [1969:1048] type 0 class 0x000200 [ 0.161654] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit] [ 0.161704] pci 0000:02:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref] [ 0.161760] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.161780] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.161790] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.161795] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.161829] pci 0000:04:01.0: [168c:001b] type 0 class 0x000200 [ 0.161845] pci 0000:04:01.0: reg 10: [mem 0xfebf0000-0xfebfffff] [ 0.161951] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) [ 0.161956] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.161962] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.161964] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.161980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.162088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.162157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.162192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.162236] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.162239] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.162241] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.167653] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.167700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.167744] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.167789] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.167834] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.167879] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.167926] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.167971] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.168086] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.168086] vgaarb: loaded [ 0.168086] vgaarb: bridge control possible 0000:01:00.0 [ 0.168086] PCI: Using ACPI for IRQ routing [ 0.169337] PCI: pci_cache_line_size set to 64 bytes [ 0.169400] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.169402] reserve RAM buffer: 000000007ffa0000 - 000000007fffffff [ 0.169506] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.169510] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.169514] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.172100] Switching to clocksource hpet [ 0.173780] pnp: PnP ACPI init [ 0.173800] ACPI: bus type pnp registered [ 0.173891] pnp 00:00: [bus 00-ff] [ 0.173893] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.173895] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.173897] pnp 00:00: [io 0x0d00-0xffff window] [ 0.173900] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.173902] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.173904] pnp 00:00: [mem 0x80000000-0xffffffff window] [ 0.173965] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.173975] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.174027] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.174030] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.174062] pnp 00:02: [dma 4] [ 0.174064] pnp 00:02: [io 0x0000-0x000f] [ 0.174066] pnp 00:02: [io 0x0081-0x0083] [ 0.174068] pnp 00:02: [io 0x0087] [ 0.174069] pnp 00:02: [io 0x0089-0x008b] [ 0.174071] pnp 00:02: [io 0x008f] [ 0.174073] pnp 00:02: [io 0x00c0-0x00df] [ 0.174099] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.174110] pnp 00:03: [io 0x0070-0x0071] [ 0.174120] pnp 00:03: [irq 8] [ 0.174145] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.174154] pnp 00:04: [io 0x0061] [ 0.174179] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.174188] pnp 00:05: [io 0x00f0-0x00ff] [ 0.174194] pnp 00:05: [irq 13] [ 0.174220] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.174721] pnp 00:06: [irq 7] [ 0.174723] pnp 00:06: [dma 3] [ 0.174725] pnp 00:06: [io 0x0378-0x037f] [ 0.174727] pnp 00:06: [io 0x0778-0x077f] [ 0.174874] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.174904] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.174907] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.174909] pnp 00:07: [io 0x0290-0x0297] [ 0.174951] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.174954] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175030] pnp 00:08: [io 0x0010-0x001f] [ 0.175033] pnp 00:08: [io 0x0022-0x003f] [ 0.175034] pnp 00:08: [io 0x0044-0x005f] [ 0.175036] pnp 00:08: [io 0x0062-0x0063] [ 0.175038] pnp 00:08: [io 0x0065-0x006f] [ 0.175040] pnp 00:08: [io 0x0072-0x007f] [ 0.175042] pnp 00:08: [io 0x0080] [ 0.175044] pnp 00:08: [io 0x0084-0x0086] [ 0.175046] pnp 00:08: [io 0x0088] [ 0.175047] pnp 00:08: [io 0x008c-0x008e] [ 0.175049] pnp 00:08: [io 0x0090-0x009f] [ 0.175051] pnp 00:08: [io 0x00a2-0x00bf] [ 0.175053] pnp 00:08: [io 0x00e0-0x00ef] [ 0.175054] pnp 00:08: [io 0x04d0-0x04d1] [ 0.175056] pnp 00:08: [io 0x0800-0x087f] [ 0.175058] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.175060] pnp 00:08: [io 0x0480-0x04bf] [ 0.175062] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 0.175064] pnp 00:08: [mem 0xfed20000-0xfed8ffff] [ 0.175124] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.175126] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.175129] system 00:08: [io 0x0480-0x04bf] has been reserved [ 0.175132] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.175134] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.175137] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175199] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.175229] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.175279] pnp 00:0a: [mem 0xffb00000-0xffbfffff] [ 0.175281] pnp 00:0a: [mem 0xfff00000-0xffffffff] [ 0.175309] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active) [ 0.175350] pnp 00:0b: [mem 0xffc00000-0xffefffff] [ 0.175393] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved [ 0.175396] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175442] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.175444] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.175487] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.175490] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.175493] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175521] pnp 00:0d: [io 0x0060] [ 0.175523] pnp 00:0d: [io 0x0064] [ 0.175528] pnp 00:0d: [irq 1] [ 0.175563] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.175609] pnp 00:0e: [irq 12] [ 0.175643] pnp 00:0e: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.175914] pnp 00:0f: [irq 4] [ 0.175916] pnp 00:0f: [dma 0 disabled] [ 0.175918] pnp 00:0f: [io 0x03f8-0x03ff] [ 0.175992] pnp 00:0f: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.176032] pnp 00:10: [mem 0xf0000000-0xf3ffffff] [ 0.176077] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.176080] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.176238] pnp 00:11: [mem 0x00000000-0x0009ffff] [ 0.176240] pnp 00:11: [mem 0x000c0000-0x000cffff] [ 0.176242] pnp 00:11: [mem 0x000e0000-0x000fffff] [ 0.176244] pnp 00:11: [mem 0x00100000-0x7fffffff] [ 0.176246] pnp 00:11: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.176301] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.176304] system 00:11: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.176307] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.176309] system 00:11: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.176312] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.176438] pnp: PnP ACPI: found 18 devices [ 0.176440] ACPI: ACPI bus type pnp unregistered [ 0.183137] PCI: max bus depth: 1 pci_try_num: 2 [ 0.183167] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.183171] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff] [ 0.183173] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff] [ 0.183176] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 0.183179] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.183182] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.183185] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.183188] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfe9fffff] [ 0.183191] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bit pref] [ 0.183195] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 0.183198] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.183202] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff] [ 0.183206] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.183211] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.183213] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.183218] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.183221] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.183227] pci 0000:00:1e.0: PCI bridge to [bus 04-04] [ 0.183231] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.183253] pci 0000:00:01.0: setting latency timer to 64 [ 0.183258] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.183263] pci 0000:00:1c.0: setting latency timer to 64 [ 0.183268] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.183275] pci 0000:00:1c.1: setting latency timer to 64 [ 0.183281] pci 0000:00:1e.0: setting latency timer to 64 [ 0.183284] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.183286] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.183288] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.183290] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff] [ 0.183293] pci_bus 0000:01: resource 2 [mem 0xe6000000-0xefffffff 64bit pref] [ 0.183295] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.183297] pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff] [ 0.183299] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.183301] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.183303] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.183306] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.183308] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.183310] pci_bus 0000:04: resource 4 [io 0x0000-0xffff] [ 0.183312] pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff] [ 0.183369] NET: Registered protocol family 2 [ 0.183468] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.184085] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.185579] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.185943] TCP: Hash tables configured (established 262144 bind 65536) [ 0.185946] TCP reno registered [ 0.185957] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.185974] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.186106] NET: Registered protocol family 1 [ 0.186266] pci 0000:01:00.0: Boot video device [ 0.186281] PCI: CLS 32 bytes, default 64 [ 0.186330] Unpacking initramfs... [ 0.398939] Freeing initrd memory: 10968k freed [ 0.403135] audit: initializing netlink socket (disabled) [ 0.403148] type=2000 audit(1390253229.396:1): initialized [ 0.414572] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.415031] VFS: Disk quotas dquot_6.5.2 [ 0.415060] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.415120] msgmni has been set to 4020 [ 0.415261] alg: No test for stdrng (krng) [ 0.415288] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.415291] io scheduler noop registered [ 0.415292] io scheduler deadline registered [ 0.415305] io scheduler cfq registered (default) [ 0.415378] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.415406] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.415452] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.415484] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.415536] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.415568] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.415643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.415663] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.415665] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.415887] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.415889] vesafb: scrolling: redraw [ 0.415891] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.416188] vesafb: framebuffer at 0xe7000000, mapped to 0xffffc90004980000, using 3072k, total 3072k [ 0.440675] Console: switching to colour frame buffer device 128x48 [ 0.465074] fb0: VESA VGA frame buffer device [ 0.465090] intel_idle: does not run on family 6 model 15 [ 0.465114] ERST: Table is not found! [ 0.465115] GHES: HEST is not enabled! [ 0.465174] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.485497] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.540566] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.540804] Linux agpgart interface v0.103 [ 0.541034] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.543811] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.543817] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.543945] mousedev: PS/2 mouse device common for all mice [ 0.543988] rtc_cmos 00:03: RTC can wake from S4 [ 0.544096] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.544120] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.544133] cpuidle: using governor ladder [ 0.544135] cpuidle: using governor menu [ 0.544327] TCP cubic registered [ 0.544364] NET: Registered protocol family 10 [ 0.544775] Mobile IPv6 [ 0.544778] NET: Registered protocol family 17 [ 0.544781] Registering the dns_resolver key type [ 0.544906] PM: Hibernation image not present or could not be loaded. [ 0.544917] registered taskstats version 1 [ 0.545284] rtc_cmos 00:03: setting system clock to 2014-01-20 21:27:10 UTC (1390253230) [ 0.545317] Initializing network drop monitor service [ 0.546443] Freeing unused kernel memory: 576k freed [ 0.546566] Write protecting the kernel read-only data: 6144k [ 0.548821] Freeing unused kernel memory: 652k freed [ 0.551295] Freeing unused kernel memory: 688k freed [ 0.562252] udevd[49]: starting version 175 [ 0.563299] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.609003] atl1 0000:02:00.0: setting latency timer to 64 [ 0.609049] atl1 0000:02:00.0: version 2.1.3 [ 0.612147] usbcore: registered new interface driver usbfs [ 0.612172] usbcore: registered new interface driver hub [ 0.618087] SCSI subsystem initialized [ 0.621849] usbcore: registered new device driver usb [ 0.622264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.622306] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.622310] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.622335] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.622354] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.622363] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.626257] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.628486] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfcffbc00 [ 0.644601] uhci_hcd: USB Universal Host Controller Interface driver [ 0.650787] libata version 3.00 loaded. [ 0.660355] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.660382] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.660385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.660387] usb usb1: Product: EHCI Host Controller [ 0.660389] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd [ 0.660391] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.660508] hub 1-0:1.0: USB hub found [ 0.660513] hub 1-0:1.0: 8 ports detected [ 0.660614] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.660617] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.660626] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.660652] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480 [ 0.660688] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.660690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.660692] usb usb2: Product: UHCI Host Controller [ 0.660694] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd [ 0.660696] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.660798] hub 2-0:1.0: USB hub found [ 0.660803] hub 2-0:1.0: 2 ports detected [ 0.660882] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.660885] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.660895] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.660931] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 [ 0.660964] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.660967] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.660969] usb usb3: Product: UHCI Host Controller [ 0.660970] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd [ 0.660972] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.661080] hub 3-0:1.0: USB hub found [ 0.661084] hub 3-0:1.0: 2 ports detected [ 0.661159] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.661162] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.661170] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.661202] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880 [ 0.661237] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.661239] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.661241] usb usb4: Product: UHCI Host Controller [ 0.661243] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd [ 0.661245] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.661350] hub 4-0:1.0: USB hub found [ 0.661354] hub 4-0:1.0: 2 ports detected [ 0.661429] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.661432] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.661442] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.661476] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00 [ 0.661510] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.661512] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.661514] usb usb5: Product: UHCI Host Controller [ 0.661516] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd [ 0.661518] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.661622] hub 5-0:1.0: USB hub found [ 0.661626] hub 5-0:1.0: 2 ports detected [ 0.661960] ata_piix 0000:00:1f.1: version 2.13 [ 0.662006] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.664696] scsi0 : ata_piix [ 0.666633] scsi1 : ata_piix [ 0.667791] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.667794] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.667829] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.667868] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.669065] scsi2 : ata_piix [ 0.669189] scsi3 : ata_piix [ 0.670321] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19 [ 0.670325] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19 [ 0.835227] ata1.00: ATAPI: Optiarc DVD RW AD-5200A, 1.05, max UDMA/66 [ 0.835231] ata1.00: limited to UDMA/33 due to 40-wire cable [ 0.848203] ata1.00: configured for UDMA/33 [ 0.850510] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-5200A 1.05 PQ: 0 ANSI: 5 [ 0.883381] ata3.00: ATA-7: ST3320820AS, 3.AAC, max UDMA/133 [ 0.883386] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.950011] ata3.00: configured for UDMA/133 [ 0.950133] scsi 2:0:0:0: Direct-Access ATA ST3320820AS 3.AA PQ: 0 ANSI: 5 [ 0.956488] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 0.956493] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.956740] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.957003] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.957050] sd 2:0:0:0: [sda] Write Protect is off [ 0.957053] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.957073] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.958783] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.958909] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.023777] sda: sda1 sda2 sda3 < sda5 sda6 > [ 1.024227] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.400017] Refined TSC clocksource calibration: 2599.999 MHz. [ 1.400023] Switching to clocksource tsc [ 1.593997] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1 [ 1.596336] platform microcode: firmware: agent loaded intel-ucode/06-0f-0d into memory [ 1.596510] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02 [ 1.596521] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1 [ 1.598740] platform microcode: firmware: agent loaded intel-ucode/06-0f-0d into memory [ 1.598915] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02 [ 1.599039] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.701483] PM: Starting manual resume from disk [ 1.701487] PM: Hibernation image partition 8:6 present [ 1.701488] PM: Looking for hibernation image. [ 1.716579] PM: Image not found (code -22) [ 1.716582] PM: Hibernation image not present or could not be loaded. [ 1.756835] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.332705] udevd[364]: starting version 175 [ 4.022356] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 4.036182] coretemp coretemp.0: Using relative temperature scale! [ 4.036197] coretemp coretemp.0: Using relative temperature scale! [ 4.299535] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 4.299580] ACPI: Power Button [PWRB] [ 4.299636] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.299668] ACPI: Power Button [PWRF] [ 4.301047] ACPI: Requesting acpi_cpufreq [ 4.312418] udevd[478]: renamed network interface eth0 to eth1 [ 4.480890] parport_pc 00:06: reported by Plug and Play ACPI [ 4.480999] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 4.567753] intel_rng: FWH not detected [ 4.690015] iTCO_vendor_support: vendor-support=0 [ 4.690842] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 4.690932] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 4.691090] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.731919] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 4.731942] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.753814] leds_ss4200: no LED devices found [ 4.834855] cfg80211: Calling CRDA to update world regulatory domain [ 4.883971] ath5k 0000:04:01.0: registered as 'phy0' [ 5.090153] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 5.461923] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 5.462770] hda_intel: Disabling MSI [ 5.462817] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 5.544603] ath: EEPROM regdomain: 0x37 [ 5.544606] ath: EEPROM indicates we should expect a direct regpair map [ 5.544608] ath: Country alpha2 being used: AW [ 5.544610] ath: Regpair used: 0x37 [ 5.587366] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.587945] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61) [ 5.927283] nvidia: module license 'NVIDIA' taints kernel. [ 5.927288] Disabling lock debugging due to kernel taint [ 6.413496] cfg80211: World regulatory domain updated: [ 6.413500] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.413504] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.413509] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.413513] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.413517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.413520] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.413535] cfg80211: Calling CRDA for country: AW [ 6.416029] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 6.435080] cfg80211: Regulatory domain changed to country: AW [ 6.435082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.435085] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6.435087] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6.435090] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6.435092] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 6.448042] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 6.480009] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 6.512015] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 6.528135] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6 [ 6.528268] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7 [ 6.528381] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8 [ 6.528493] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 6.529380] nvidia 0000:01:00.0: setting latency timer to 64 [ 6.529388] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 6.529533] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013 [ 8.791700] Adding 2121724k swap on /dev/sda6. Priority:-1 extents:1 across:2121724k [ 8.811662] EXT4-fs (sda2): re-mounted. Opts: (null) [ 9.106546] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.208869] loop: module loaded [ 10.001186] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 10.934498] RPC: Registered named UNIX socket transport module. [ 10.934502] RPC: Registered udp transport module. [ 10.934505] RPC: Registered tcp transport module. [ 10.934507] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.967139] FS-Cache: Loaded [ 11.007915] FS-Cache: Netfs 'nfs' registered for caching [ 11.021008] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.439789] atl1 0000:02:00.0: irq 44 for MSI/MSI-X [ 15.440233] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.451874] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.499753] lp0: using parport0 (interrupt-driven). [ 15.625439] Bluetooth: Core ver 2.16 [ 15.625464] NET: Registered protocol family 31 [ 15.625466] Bluetooth: HCI device and connection manager initialized [ 15.625470] Bluetooth: HCI socket layer initialized [ 15.625472] Bluetooth: L2CAP socket layer initialized [ 15.625478] Bluetooth: SCO socket layer initialized [ 15.626884] ppdev: user-space parallel port driver [ 15.657978] Bluetooth: RFCOMM TTY layer initialized [ 15.657983] Bluetooth: RFCOMM socket layer initialized [ 15.657986] Bluetooth: RFCOMM ver 1.11 [ 15.933866] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.933870] Bluetooth: BNEP filters: protocol multicast [ 19.633339] NVRM: Your system is not currently configured to drive a VGA console [ 19.633342] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 19.633345] NVRM: requires the use of a text-mode VGA console. Use of other console [ 19.633347] NVRM: drivers including, but not limited to, vesafb, may result in [ 19.633348] NVRM: corruption and stability problems, and is not supported. [ 21.771778] wlan0: authenticate with c0:ac:54:77:fd:f8 (try 1) [ 21.773368] wlan0: authenticated [ 21.780347] wlan0: associate with c0:ac:54:77:fd:f8 (try 1) [ 21.782821] wlan0: RX AssocResp from c0:ac:54:77:fd:f8 (capab=0x411 status=0 aid=1) [ 21.782825] wlan0: associated [ 21.783413] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 26.817344] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.969062] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 33.504023] wlan0: no IPv6 routers present [ 87.452495] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=90.21.188.185 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=8478 DF PROTO=TCP SPT=39468 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 88.475415] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=90.21.188.185 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=8479 DF PROTO=TCP SPT=39468 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 90.020175] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=24.243.22.155 DST=192.168.100.2 LEN=86 TOS=0x00 PREC=0x00 TTL=48 ID=58033 PROTO=UDP SPT=43975 DPT=51413 LEN=66 [ 90.460984] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=90.21.188.185 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=8480 DF PROTO=TCP SPT=39468 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 90.497621] gc-watchdog[3798] trap int3 ip:7fa95a37e491 sp:7fa9311fe670 error:0 [ 94.472221] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=90.21.188.185 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=8481 DF PROTO=TCP SPT=39468 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 102.474154] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=90.21.188.185 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=8482 DF PROTO=TCP SPT=39468 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 112.190758] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=192.225.181.46 DST=192.168.100.2 LEN=93 TOS=0x00 PREC=0x00 TTL=111 ID=21309 PROTO=UDP SPT=64273 DPT=51413 LEN=73 [ 112.195000] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=192.225.181.46 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=111 ID=21312 DF PROTO=TCP SPT=55331 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 115.184606] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=192.225.181.46 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=111 ID=24121 DF PROTO=TCP SPT=55331 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 117.453968] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=90.21.188.185 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=28189 DF PROTO=TCP SPT=42535 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 119.154782] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=94.23.51.89 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=56 ID=49195 DF PROTO=TCP SPT=49498 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 120.153695] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=94.23.51.89 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=56 ID=49196 DF PROTO=TCP SPT=49498 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 122.157652] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=94.23.51.89 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=56 ID=49197 DF PROTO=TCP SPT=49498 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 126.161632] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=94.23.51.89 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=56 ID=49198 DF PROTO=TCP SPT=49498 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 128.498361] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=119 ID=22045 PROTO=UDP SPT=17851 DPT=51413 LEN=38 [ 131.513727] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=119 ID=23623 PROTO=UDP SPT=17851 DPT=51413 LEN=38 [ 134.190204] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=94.23.51.89 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=56 ID=49199 DF PROTO=TCP SPT=49498 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 145.426566] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.235.177.228 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=1347 DF PROTO=TCP SPT=54964 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 148.450019] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.235.177.228 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=1551 DF PROTO=TCP SPT=54964 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 150.209988] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=94.23.51.89 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=56 ID=49200 DF PROTO=TCP SPT=49498 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 154.405094] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.235.177.228 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=1897 DF PROTO=TCP SPT=54964 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 157.627909] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=5725 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 160.607904] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=7430 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 160.697617] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=7481 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 163.729315] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=9371 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 166.775815] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=10952 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 169.846724] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=12716 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 170.848340] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=81.210.192.124 DST=192.168.100.2 LEN=58 TOS=0x02 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=51413 DPT=51413 LEN=38 [ 173.857070] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=81.210.192.124 DST=192.168.100.2 LEN=58 TOS=0x02 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=51413 DPT=51413 LEN=38 [ 176.549754] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=212.227.99.14 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=51527 DF PROTO=TCP SPT=42339 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 177.549550] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=212.227.99.14 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=51528 DF PROTO=TCP SPT=42339 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 179.063863] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=17700 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 179.549416] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=212.227.99.14 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=51529 DF PROTO=TCP SPT=42339 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 179.888028] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=81.210.192.124 DST=192.168.100.2 LEN=60 TOS=0x02 PREC=0x00 TTL=54 ID=25045 DF PROTO=TCP SPT=50399 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 182.200293] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=19347 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 183.549432] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=212.227.99.14 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=51530 DF PROTO=TCP SPT=42339 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 187.375289] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=81.210.192.124 DST=192.168.100.2 LEN=60 TOS=0x02 PREC=0x00 TTL=54 ID=40876 DF PROTO=TCP SPT=60238 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 188.375606] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=81.210.192.124 DST=192.168.100.2 LEN=60 TOS=0x02 PREC=0x00 TTL=54 ID=40877 DF PROTO=TCP SPT=60238 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 190.380497] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=81.210.192.124 DST=192.168.100.2 LEN=60 TOS=0x02 PREC=0x00 TTL=54 ID=40878 DF PROTO=TCP SPT=60238 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 194.440797] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=81.210.192.124 DST=192.168.100.2 LEN=60 TOS=0x02 PREC=0x00 TTL=54 ID=40879 DF PROTO=TCP SPT=60238 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 202.391730] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=81.210.192.124 DST=192.168.100.2 LEN=60 TOS=0x02 PREC=0x00 TTL=54 ID=40880 DF PROTO=TCP SPT=60238 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 203.262381] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=30982 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 206.312236] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=32667 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 229.034396] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=185.16.108.202 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=48164 DF PROTO=TCP SPT=38183 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 230.034335] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=185.16.108.202 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=48165 DF PROTO=TCP SPT=38183 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 232.034683] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=185.16.108.202 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=48166 DF PROTO=TCP SPT=38183 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 232.392577] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=13839 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 235.439736] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=95.133.131.109 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=15514 PROTO=UDP SPT=17851 DPT=51413 LEN=28 [ 236.034645] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=185.16.108.202 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=48167 DF PROTO=TCP SPT=38183 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 237.593381] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=90.21.188.185 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=60645 DF PROTO=TCP SPT=51113 DPT=51413 WINDOW=7300 RES=0x00 SYN URGP=0 [ 239.241698] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=192.225.181.46 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=111 ID=632 DF PROTO=TCP SPT=55459 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 242.255396] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=192.225.181.46 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=111 ID=2971 DF PROTO=TCP SPT=55459 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 244.034534] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=185.16.108.202 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=48168 DF PROTO=TCP SPT=38183 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 248.287261] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=192.225.181.46 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=8541 DF PROTO=TCP SPT=55459 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 260.035018] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=185.16.108.202 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=48169 DF PROTO=TCP SPT=38183 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 310.631368] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=212.227.99.14 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=57298 DF PROTO=TCP SPT=43716 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 311.630378] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=212.227.99.14 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=57299 DF PROTO=TCP SPT=43716 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 313.630510] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=212.227.99.14 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=57300 DF PROTO=TCP SPT=43716 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 317.812290] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=212.227.99.14 DST=192.168.100.2 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=57301 DF PROTO=TCP SPT=43716 DPT=51413 WINDOW=14600 RES=0x00 SYN URGP=0 [ 355.066148] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=116 ID=8222 DF PROTO=TCP SPT=52536 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 355.100312] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=116 ID=8223 PROTO=UDP SPT=55978 DPT=51413 LEN=38 [ 358.074911] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=116 ID=8224 DF PROTO=TCP SPT=52536 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 358.188505] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=116 ID=8225 PROTO=UDP SPT=55978 DPT=51413 LEN=38 [ 360.006853] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=95 TOS=0x00 PREC=0x00 TTL=117 ID=28538 PROTO=UDP SPT=15485 DPT=51413 LEN=75 [ 363.758104] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=116 ID=8226 DF PROTO=TCP SPT=52536 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 364.030479] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=28540 DF PROTO=TCP SPT=57513 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 364.043092] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=117 ID=28539 PROTO=UDP SPT=15485 DPT=51413 LEN=38 [ 364.419506] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=116 ID=8227 PROTO=UDP SPT=55978 DPT=51413 LEN=38 [ 367.028363] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=28541 DF PROTO=TCP SPT=57513 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 367.092309] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=117 ID=28542 PROTO=UDP SPT=15485 DPT=51413 LEN=38 [ 373.026810] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=28543 DF PROTO=TCP SPT=57513 DPT=51413 WINDOW=8192 RES=0x00 SYN URGP=0 [ 373.138536] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=117 ID=28544 PROTO=UDP SPT=15485 DPT=51413 LEN=38 [ 474.027281] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=117 ID=28545 PROTO=UDP SPT=15485 DPT=51413 LEN=38 [ 477.523524] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=117 ID=28547 PROTO=UDP SPT=15485 DPT=51413 LEN=38 [ 483.604725] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=84.240.29.175 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=117 ID=28549 PROTO=UDP SPT=15485 DPT=51413 LEN=38 [ 485.797290] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=116 ID=8228 PROTO=UDP SPT=55978 DPT=51413 LEN=38 [ 489.354937] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=116 ID=8231 PROTO=UDP SPT=55978 DPT=51413 LEN=38 [ 495.439748] Inbound IN=wlan0 OUT= MAC=00:0e:8e:0d:0e:2c:c0:ac:54:77:fd:f7:08:00 SRC=41.82.86.90 DST=192.168.100.2 LEN=58 TOS=0x00 PREC=0x00 TTL=116 ID=8233 PROTO=UDP SPT=55978 DPT=51413 LEN=38
lspci -k | grep -A2 VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 630] (rev a1)
Subsystem: Giga-byte Technology Device 3544
Kernel driver in use: nvidia
Kod:
ii glx-alternative-nvidia 0.2.2 amd64 allows the selection of NVIDIA as GLX provider ii libgl1-nvidia-alternatives 304.88-1+deb7u1 amd64 transition libGL.so* diversions to glx-alternative-nvidia rc libgl1-nvidia-alternatives-ia32 304.88-1+deb7u1 amd64 simplifies replacing MESA libGL with GPU vendor libraries (32-bit) ii libgl1-nvidia-glx:amd64 304.88-1+deb7u1 amd64 NVIDIA binary OpenGL libraries ii libgl1-nvidia-glx:i386 304.88-1+deb7u1 i386 NVIDIA binary OpenGL libraries ii libglx-nvidia-alternatives 304.88-1+deb7u1 amd64 transition libgl.so diversions to glx-alternative-nvidia ii libxvmcnvidia1:amd64 304.88-1+deb7u1 amd64 NVIDIA binary XvMC library ii nvidia-alternative 304.88-1+deb7u1 amd64 allows the selection of NVIDIA as GLX provider ii nvidia-glx 304.88-1+deb7u1 amd64 NVIDIA metapackage ii nvidia-installer-cleanup 20120630+3 amd64 Cleanup after driver installation with the nvidia-installer ii nvidia-kernel-common 20120630+3 amd64 NVIDIA binary kernel module support files ii nvidia-kernel-dkms 304.88-1+deb7u1 amd64 NVIDIA binary kernel module DKMS source ii nvidia-settings 304.88-1 amd64 Tool for configuring the NVIDIA graphics driver ii nvidia-support 20120630+3 amd64 NVIDIA binary graphics driver support files ii nvidia-vdpau-driver:amd64 304.88-1+deb7u1 amd64 NVIDIA vdpau driver ii xserver-xorg-video-nvidia 304.88-1+deb7u1 amd64 NVIDIA binary Xorg driver
glxinfo | grep string
Kod:
server glx vendor string: NVIDIA Corporation server glx version string: 1.4 client glx vendor string: NVIDIA Corporation client glx version string: 1.4 OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 630/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.88 OpenGL shading language version string: 4.20 NVIDIA via Cg compiler
Czy zmiana jajka jest niebezpieczna, przyznam szczerze dużo serca wsadziłem w doprowadzenie tego systemu do używalności, i nie chcial bym tego robic jeszcze raz, jak ma się to do oprogramowania i zależności.
Offline
#7 2014-01-20 22:18:42
Huk - Smoleńsk BULWA!
- Huk
- Smoleńsk BULWA!
- Zarejestrowany: 2006-11-08
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
@kocur87:
Ale jaka firma zasilacza? Jak jakiś Chieftec, Tagan, beQuite, Fortron czy coś podobnego to powinno styknąć, ale jak jakiś noname to nawet te 50 W dodatkowe może go dobijać. Co do jajka - jeżeli skompilujesz sobie samemu i doinstalujesz bez odinstalowywania obecnego to w najgorszym wypadku system Ci się powinien nie włączyć, ale przełączysz na stare i powinno wrócić do tego co masz obecnie. Jakbyś miał kompilować to spróbuj 3.9.x.
Jeszcze zanim zaczniesz się w to bawić widzę że masz dość stary ster: v304.88 najnowsze to 33.38 do pobrania tutaj:
ftp://download.nvidia.com/XFree86/Linux-x86/331.38/NVIDIA-Linux-x86-331.38.run
tyle że pewnie masz to zainstalowane z repo prawda? W takim wypadku będzie się gryzło, musiałbyś odinstalować stery z repo i potem ręcznie zainstalować najnowsze ze stronki.
Offline
#8 2014-01-20 22:44:26
kocur87 - Użytkownik
- kocur87
- Użytkownik
- Zarejestrowany: 2013-11-30
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Co do sterownika, zainstalowałem najpierw nowszy z wheezy-backports, ale gdy zaczęło mi się tak dziać usunąłem go i zainstalowałem z podstawowego repo debiana dla whezzy. Zasilacz firmy Mustang (chuyoza, wolał bym tagana ale cóż :/ jak się nie ma co się lubi ...) spróbuje obciążyć kompa jakimś programem do testów i zmierzyć napięcia multimetrem. Na razie zmieniłem kabel sata od dysku wyczyściłem styki izopropanolem i przepiąłem się na inne gniazdo sata. Już kiedyś instalowałem debiana 3 razy od nowa i nie mogłem dojść co jest nie tak bo zacinało mi kursor myszy, wyglądało to jak zwias, a okazało się że przyczyną była mysz bezprzewodowa pod usb, po prostu otwarty sterownik był zrypany, tak samo miałem kiedyś z dyskiem a przyczyną była wtyczka od zasilania, grzebałem w sprzęcie więc najpierw tu zacznę szukać problemu . Mam jeszcze WinXp zainstalowane musiał bym na nim popracować z 8 godzin i zobaczyć czy się nie zwiesi wtedy był bym pewien że to soft a nie sprzęt. Jak się okaże że jednak soft to wtedy wykręcę debianowi jajco :D
Offline
#9 2014-01-20 22:44:51
uzytkownikubunt - Zbanowany
- uzytkownikubunt
- Zbanowany
- Zarejestrowany: 2012-04-25
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
361
Ostatnio edytowany przez uzytkownikubunt (2016-12-01 00:43:06)
Offline
#10 2014-01-20 22:57:30
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
W backportach masz nowszy kernel dla stable. Instalowany jest obok obecnego, w razie problemów po prostu wybierasz z GRUB-a stary.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#11 2014-01-20 23:01:04
Huk - Smoleńsk BULWA!
- Huk
- Smoleńsk BULWA!
- Zarejestrowany: 2006-11-08
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
@kocur87:
Ehhh zasiłka z "czarnej listy" - współczuję :( nawet jak się okaże że to sterownik/jajo/cokolwiek to radziłbym wymienić to badziewie asap o ile masz kasę, bo nie znasz dnia ani godziny...
Jeszcze pamiętaj o tych sterownikach - nie wiem jakie były w backportach, ale te do których podałem linka sa sprzed tygodnia.
Offline
#12 2014-01-22 19:46:27
kocur87 - Użytkownik
- kocur87
- Użytkownik
- Zarejestrowany: 2013-11-30
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Jak na razie po zabawie taśmami, wygląda na to że awaria ustąpiła. Sprawdziłem napięcia na zasilaczu przy obciążeniu procesora na 99% oraz grafiki za pomocą OCCT pod windą i multimetru, wygląda na to że zasilacz daje sobie radę 12.17 V i 5.15V przy obciążeniu. Poczekam jeszcze trochę jak się usterka nie ujawni to temat będzie do zamknięcia, dziękuje wszystkim za pomoc :)
Offline
#13 2014-01-22 20:44:30
Huk - Smoleńsk BULWA!
- Huk
- Smoleńsk BULWA!
- Zarejestrowany: 2006-11-08
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
@kocur87:
Sorry ale muszę być upierdliwy ;] naprawdę radzę wymienić to "cudo" na coś normalnego - na promocjach często można dostać markową zasiłkę 400-600 W za 200 zł, a z tym co masz obecnie to jak to mówią "nie znasz dnia ani godziny...". Jakby nie patrzeć zasilacz to IMHO najważniejsza (a już na pewno jedna z najważniejszych) części kompa.
Offline
#14 2014-01-22 21:49:05
krasnij - oj tam
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Do 200 zł możesz spokojnie kupić Corsaira VS 450. Na zasilaczu generalnie nie powinno się oszczędzać.
Pozdrawiam i życzę sukcesów :)
[url=https://pgp.mit.edu/pks/lookup?op=get&search=0xA0C69B3CD46838AF]Mój Public Key[/url]
[url=http://www.keros-it.com]Serwis komputerowy i elektroniczny - Świdwin[/url]
The truth is out there
Offline
#15 2014-01-22 22:10:46
kocur87 - Użytkownik
- kocur87
- Użytkownik
- Zarejestrowany: 2013-11-30
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Postaram się o nowy zasilacz jak tylko znajdę fundusz :). Znowu się zwiesił i się wkurzyłem, zaktualizowałem jądro do 3.12 z backportów i sterownik z backportów 319.72, zobaczymy czy pomoże.
Ostatnio edytowany przez kocur87 (2014-01-23 17:39:28)
Offline
#16 2014-01-22 23:10:59
fervi - Użytkownik
- fervi
- Użytkownik
- Zarejestrowany: 2010-03-14
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Jak nic nie da to spróbuj używać nouveau. Jeśli mimo wszystko będą te zawieszenia to problem hardware'owy
Jeśli nie to albo nouveau nie ma czegoś zaimplementowanego i jest to problem z nvidią
Nouveau oczywiście to sterowniki dla kart Nvidii od społeczności
Fervi
Offline
#17 2014-01-24 19:41:50
kocur87 - Użytkownik
- kocur87
- Użytkownik
- Zarejestrowany: 2013-11-30
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
I wczoraj znów się zaciął po dłuższym używaniu, przy oglądaniu filmu. Ale to nic, dzisiaj zainstalowałem najnowsze drivery ze strony nvidii niestety bez CUDA bo nie chciało się wkompilować w jajco 3.12. Albo on albo ja, nie odpuszczę, szkoda tylko że w domu już mnie gonią bo zamiast robić coś pożytecznego to grzebie przy kompie :) , na poprawę humoru zapodałem sobie solidną dawkę drum & bass-u i czekam aż się sQrwiel wykrzaczy :P
Offline
#18 2014-01-24 19:53:42
uzytkownikubunt - Zbanowany
- uzytkownikubunt
- Zbanowany
- Zarejestrowany: 2012-04-25
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
369
Ostatnio edytowany przez uzytkownikubunt (2016-12-01 00:43:16)
Offline
#19 2014-01-25 19:55:04
kocur87 - Użytkownik
- kocur87
- Użytkownik
- Zarejestrowany: 2013-11-30
Re: Nowa karta grafiki GT630 i zawieszanie się systemu.
Temat rozwiązany najnowsze sterowniki pomogły :) nie zawiesza się . Podsumowując zaktualizowalem jądro do wersji 3.12 z backportów, opis tutaj [url]http://dug.net.pl/tekst/194[/url] Zainstalowałem sterownik NVIDIA 331.38 przez skrypt sh ze strony [url]http://www.nvidia.pl/Download/index.aspx?lang=pl[/url] opis instalacji tutaj [url]http://dug.net.pl/tekst/142/nvidia___zamkniete_sterowniki_w_debianie/[/url] . Podczas instalacji nie trzeba blokować Nouveau skrypt robi to sam, można spróbować dodać moduł do dkms żeby przy zmianie jadra nie trzeba było przeinstalować sterownika, ale u mnie musiałem pominąć tę opcję, może być też problem z obsługą CUDA wtedy należy odpalić skrypt jeszcze raz dodając argument
Kod:
#./NVIDIA-Linux-x86_64-331.38 --non-unified- memory
i jak wszystko pójdzie dobrze to można cieszyć się nową grafiką. Pytanie off-topic czy u was w menu pod prawym przyciskiem myszy w gnome nie ma opcji usuń, teraz to dopiero zauważyłem bo zazwyczaj używam shift+del albo ctrl+del. Wielkie dzięki za pomoc :)
Ostatnio edytowany przez kocur87 (2014-02-11 21:51:38)
Offline
Strony: 1
- Forum Debian Users Gang
- » Instalacja i podstawowa konfiguracja
- » Nowa karta grafiki GT630 i zawieszanie się systemu.
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00015 | SET CHARSET latin2 |
| 0.00008 | SET NAMES latin2 |
| 0.00109 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.116.21.152' WHERE u.id=1 |
| 0.00095 | UPDATE punbb_online SET logged=1728278674 WHERE ident='18.116.21.152' |
| 0.00044 | SELECT * FROM punbb_online WHERE logged<1728278374 |
| 0.00081 | DELETE FROM punbb_online WHERE ident='18.227.10.45' |
| 0.00105 | DELETE FROM punbb_online WHERE ident='3.145.7.208' |
| 0.00157 | DELETE FROM punbb_online WHERE ident='3.16.135.36' |
| 0.00084 | SELECT topic_id FROM punbb_posts WHERE id=252608 |
| 0.00011 | SELECT id FROM punbb_posts WHERE topic_id=25038 ORDER BY posted |
| 0.00086 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=25038 AND t.moved_to IS NULL |
| 0.00009 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00201 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=25038 ORDER BY p.id LIMIT 0,25 |
| 0.00087 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=25038 |
| Total query time: 0.01092 s | |