Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
[ 1183.903643] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver [ 1183.903680] [ERROR]Aborting because fallback start is disabled. root@baza:/home/pakos# optirun -vvv glxgears [ 1539.811688] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf [ 1539.811949] [INFO]Configured driver: nvidia [ 1539.812056] [DEBUG]optirun version 3.2.1 starting... [ 1539.812062] [DEBUG]Active configuration: [ 1539.812064] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf [ 1539.812067] [DEBUG] X display: :8 [ 1539.812068] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia [ 1539.812071] [DEBUG] Socket path: /var/run/bumblebee.socket [ 1539.812073] [DEBUG] Accel/display bridge: auto [ 1539.812075] [DEBUG] VGL Compression: proxy [ 1539.812077] [DEBUG] VGLrun extra options: [ 1539.812078] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus [ 1539.812102] [DEBUG]Using auto-detected bridge primus [ 1539.820247] [INFO]Response: No - error: Could not load GPU driver [ 1539.820264] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver [ 1539.820268] [DEBUG]Socket closed. [ 1539.820284] [ERROR]Aborting because fallback start is disabled. [ 1539.820289] [DEBUG]Killing all remaining processes.
# Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia-current PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Section "ServerLayout" Identifier "Layout0" Option "AutoAddDevices" "false" Option "AutoAddGPU" "false" EndSection Section "Device" Identifier "DiscreteNvidia" Driver "nvidia" VendorName "NVIDIA Corporation" # If the X server does not automatically detect your VGA device, # you can manually set it here. # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data # as you see in the commented example. # This Setting may be needed in some platforms with more than one # nvidia card, which may confuse the proprietary driver (e.g., # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04. BusID "PCI:07:00.0" # Setting ProbeAllGpus to false prevents the new proprietary driver # instance spawned to try to control the integrated graphics card, # which is already being managed outside bumblebee. # This option doesn't hurt and it is required on platforms running # more than one nvidia graphics card with the proprietary driver. # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT). # If this option is not set, the new Xorg may blacken the screen and # render it unusable (unless you have some way to run killall Xorg). Option "ProbeAllGpus" "false" Option "NoLogo" "true" Option "UseEDID" "false" Option "UseDisplayDevice" "none" EndSection
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 07:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)
Linux baza 3.13-1.slh.1-aptosid-amd64 #1 SMP PREEMPT Fri Jan 31 03:11:44 UTC 2014 x86_64 GNU/Linux
ii bumblebee 3.2.1-5 amd64 NVIDIA Optimus support for Linux ii bumblebee-nvidia 3.2.1-5 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver ii bbswitch-dkms 0.8-1 amd64 Interface for toggling the power on NVIDIA Optimus video cards ii glx-alternative-nvidia 0.4.1 amd64 allows the selection of NVIDIA as GLX provider ii libgl1-nvidia-glx:amd64 319.82-1 amd64 NVIDIA binary OpenGL libraries ii libgl1-nvidia-glx:i386 319.82-1 i386 NVIDIA binary OpenGL libraries ii libgl1-nvidia-glx-i386 319.82-1 i386 NVIDIA binary OpenGL 32-bit libraries ii libnvidia-ml1:amd64 319.82-1 amd64 NVIDIA Management Library (NVML) runtime library ii nvidia-alternative 319.82-1 amd64 allows the selection of NVIDIA as GLX provider ii nvidia-driver 319.82-1 amd64 NVIDIA metapackage ii nvidia-installer-cleanup 20131102+1 amd64 cleanup after driver installation with the nvidia-installer ii nvidia-kernel-common 20131102+1 amd64 NVIDIA binary kernel module support files ii nvidia-kernel-dkms 319.82-1 amd64 NVIDIA binary kernel module DKMS source ii nvidia-settings 319.72-1 amd64 tool for configuring the NVIDIA graphics driver ii nvidia-support 20131102+1 amd64 NVIDIA binary graphics driver support files ii nvidia-vdpau-driver:amd64 319.82-1 amd64 NVIDIA vdpau driver ii xserver-xorg-video-nvidia 319.82-1 amd64 NVIDIA binary Xorg driver
Jakieś pomysły ?
Ostatnio edytowany przez Pakos (2014-02-03 17:14:03)
Offline
sudo dkms status
Fervi
Offline
bbswitch, 0.8, 3.13-1.slh.1-aptosid-amd64, x86_64: installed nvidia-current, 319.82, 3.13-1.slh.1-aptosid-amd64, x86_64: installed virtualbox, 4.3.2, 3.12-1-amd64, x86_64: installed
Offline
Sprawdzałeś na dystrybucyjnym jądrze albo na trochę starszej wersji?
Offline
Czy kiedyś na tej karcie działał Bumblebee?
Fervi
Offline
@Pakos:
Zobaczy czy w dmesg nie masz błędów w stylu:
[99101.294734] NVRM: GPU at 0000:01:00.0 has fallen off the bus. [99101.294742] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Jak tak to niestety trafiłeś na to samo co ja w swoim Y580 - znany bug w sterach Nvidii od jajca 3.9 wzwyż - nic poza downgradem jajca nie da się zrobić :/ (chyba że nowe stery to naprawiły w końcu... sprawdzałem miesiąc temu).
Offline
[quote=Huk]@Pakos:
Zobaczy czy w dmesg nie masz błędów w stylu:
[99101.294734] NVRM: GPU at 0000:01:00.0 has fallen off the bus. [99101.294742] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Jak tak to niestety trafiłeś na to samo co ja w swoim Y580 - znany bug w sterach Nvidii od jajca 3.9 wzwyż - nic poza downgradem jajca nie da się zrobić :/ (chyba że nowe stery to naprawiły w końcu... sprawdzałem miesiąc temu).[/quote]
sciagam wlasnie jajko 3.9 to sprawdze
[quote=fervi]Czy kiedyś na tej karcie działał Bumblebee?
Fervi[/quote]
nie, mam ta maszyne od 2 dni ;)
Offline
Bo karta jest dość nowa i wydaje mi się, że masz za stare sterowniki
Wejdź na stronę siduction i pobierz nowe (tzn. dodaj repozytorium)
Fervi
Offline
[quote=fervi]Bo karta jest dość nowa i wydaje mi się, że masz za stare sterowniki
Wejdź na stronę siduction i pobierz nowe (tzn. dodaj repozytorium)
Fervi[/quote]
z tego co widze to chyba nie ma nowszych sterow w ich repo
[quote=Huk]@Pakos:
Zobaczy czy w dmesg nie masz błędów w stylu:
[99101.294734] NVRM: GPU at 0000:01:00.0 has fallen off the bus. [99101.294742] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Jak tak to niestety trafiłeś na to samo co ja w swoim Y580 - znany bug w sterach Nvidii od jajca 3.9 wzwyż - nic poza downgradem jajca nie da się zrobić :/ (chyba że nowe stery to naprawiły w końcu... sprawdzałem miesiąc temu).[/quote]
hmm na 3.9 wywala black screen, mozesz podac swoja konfiguracje bumblebee?
Offline
@Pakos:
Niestety podczas ostatniego czyszczenia, wywaliłem całe bumblebee, wraz z konfigami (używam tego Debiana zarówno na lapku jak i stacjonarce i bumblebee gryzło się ze stacjonarką... zreszta po wywaleniu nadal coś nie śmiga...), ale z tego co pamiętam nic specjalnego tam nie zmieniałem - czarny ekran masz po załączeniu optirun czy już na starcie? Jak to drugie to wywal /etc/X11/xorg.conf - bo pewnie na nowszym jaju był nowszy driver intelowski i mógł dodać coś co wysypuje się na starszym. Czarny ekran na starcie raczej nic z Nvidią wspólnego nie ma, tylko ze zintegrowanym Intelem.
Offline
A czemu by nie wypróbować Liquorixa? Zakładam że to PC do domywych zastosowań.
Offline
http://packages.siduction.org/
W repozytorium experimental masz 331
Fervi
Offline
[quote=Red_Fedora]A czemu by nie wypróbować Liquorixa? Zakładam że to PC do domywych zastosowań.[/quote]
tu juz inny error :)
[ 62.261457] [DEBUG]Using auto-detected bridge primus [ 63.118758] [INFO]Response: No - error: [XORG] (EE) No devices detected. [ 63.118770] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
Offline
Nie wykrył sterowników
Wgrałeś 331?
Fervi
PS. Jak coś są bardzo fajne nouveau :D
Ostatnio edytowany przez fervi (2014-02-02 23:21:27)
Offline
a ja mam taki komunikat:
optirun glxgears [ 3233.061260] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
Offline
Może byś tak raczył napisać (najlepiej w osobnym wątku) jaki masz system, jaki sprzęt, jakie sterowniki i w jaki sposób instalowane, jak konfigurowałeś bumblebee?
Czy pomyliłeś forum z infolinią Wróżbity Macieja?
Konto od 2005 roku, a kolejne pytanie bez treści.
Offline
instalowalem jak wszyscy a system debian sid z dokladnie tym samym kernelem:
dkms status bbswitch, 0.8, 3.16-1.slh.4-aptosid-amd64, x86_64: installed nvidia-current, 340.32, 3.16-1.slh.4-aptosid-amd64, x86_64: installed
lapek: t430
lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [NVS 5400M] (rev a1)
Ostatnio edytowany przez pink (2014-09-06 13:13:19)
Offline
Tu podobne przypadki:
[bug]756522[/bug]
Bumblebee to proteza i nie zawsze działa bez kombinowania.
Offline
Są 2 już rozwiązania:
- Primus dla Nouveau / cośtam od AMD
- Wyłączenie karty Intela od Nvidii
Fervi
Offline
Wszystkie są protezami.
Offline
Problem jest taki, że druga karta jest protezą :P
Fervi
Offline
Strony: 1
Time (s) | Query |
---|---|
0.00019 | SET CHARSET latin2 |
0.00004 | SET NAMES latin2 |
0.00101 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.136.22.184' WHERE u.id=1 |
0.00272 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.136.22.184', 1732755424) |
0.00075 | SELECT * FROM punbb_online WHERE logged<1732755124 |
0.00107 | SELECT topic_id FROM punbb_posts WHERE id=254571 |
0.00005 | SELECT id FROM punbb_posts WHERE topic_id=25133 ORDER BY posted |
0.00090 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=25133 AND t.moved_to IS NULL |
0.00007 | SELECT search_for, replace_with FROM punbb_censoring |
0.00302 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=25133 ORDER BY p.id LIMIT 0,25 |
0.00128 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=25133 |
Total query time: 0.0111 s |