Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
- Forum Debian Users Gang
- » Multimedia
- » VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
#1 2014-02-06 17:52:45
majsza - 
Użytkownik
- majsza
- Użytkownik
- Skąd: Łowicz
- Zarejestrowany: 2011-05-14
VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Włączenie trybu fullscreen powoduje czarny ekran i brak reakcji na jakikolwiek inny klawisz, oprócz klawisza zasilanie,gdzie dopiero mogę wylogować się z sesji. Zaznaczę, że dźwięk cały czas leci podczas "leci w tle".
Szczegóły:
Kod:
majsza@debian:~$ uname -r ; lsb_release -a 3.12-1-486 No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux testing (jessie) Release: testing Codename: jessie
Kod:
majsza@debian:~$ dpkg -l | grep vlc ii libvlc5 2.1.2-2+b1 i386 multimedia player and streamer library ii libvlccore7 2.1.2-2+b1 i386 base library for VLC and its modules ii phonon-backend-vlc:i386 0.7.1-1 i386 Phonon VLC backend ii vlc 2.1.2-2+b1 i386 multimedia player and streamer ii vlc-data 2.1.2-2 all Common data for VLC ii vlc-nox 2.1.2-2+b1 i386 multimedia player and streamer (without X support) ii vlc-plugin-notify 2.1.2-2+b1 i386 LibNotify plugin for VLC ii vlc-plugin-pulse 2.1.2-2+b1 i386 PulseAudio plugin for VLC
Kod:
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RC410M [Mobility Radeon Xpress 200M] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff31
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeonKonsola pokazuje w trakcie uruchomionego filmu:
majsza@debian:~$ vlc
Kod:
VLC media player 2.1.2 Rincewind (revision 2.1.2-0-ga4c4876) [0x98d28f8] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc', aby używać vlc bez interfejsu. [0xb4903398] avi demux error: no key frame set for track 1 Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0xb4917b90] xcb_xv vout display error: no available XVideo adaptor Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0xb4917b90] main vout display error: Failed to resize display [mpeg4 @ 0xb490f340] header damaged [mpeg4 @ 0xb490f340] header damaged [0x98fc818] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer [0x98fc818] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer [mpeg4 @ 0xb490f340] header damaged [mpeg4 @ 0xb490f340] header damaged [mpeg4 @ 0xb490f340] header damaged [mpeg4 @ 0xb490f340] header damaged [mpeg4 @ 0xb490f340] header damaged
A tutaj film się zacinał (na domyślnych ustawieniach):
Kod:
majsza@debian:~$ vlc VLC media player 2.1.2 Rincewind (revision 2.1.2-0-ga4c4876) [0x8f758f8] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc', aby używać vlc bez interfejsu. (vlc:3688): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed (vlc:3688): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0xb49156c8] xcb_xv vout display error: no available XVideo adaptor Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0xb49156c8] main vout display error: Failed to resize display [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged [mpeg4 @ 0xb490ca60] header damaged
Jakie dane mam jeszcze dostarczyć?
Smplayer działa bezbłędnie.
[url=http://postimage.org/][img]http://s28.postimg.org/opi2x9ss9/powered_debian.png[/img][/url][url=http://postimage.org/][img]http://s23.postimg.org/6d2jegeqv/xubuntu_napl.jpg[/img][/url]
Offline
#2 2014-02-06 18:14:11
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Spróbuj vlc z deb-multimedia.
Wcześniej wyczyść konfigurację w domowym od vlc
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#3 2014-02-06 18:58:41
majsza - Użytkownik
- majsza
- Użytkownik
- Skąd: Łowicz
- Zarejestrowany: 2011-05-14
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Po dodaniu deb-multimedia to samo:
Kod:
majsza@debian:~$ apt-cache policy vlc
vlc:
Zainstalowana: 1:2.1.2-dmo2
Kandydująca: 1:2.1.2-dmo2
Tabela wersji:
*** 1:2.1.2-dmo2 0
500 http://www.deb-multimedia.org/ jessie/main i386 Packages
100 /var/lib/dpkg/status
2.1.2-2+b1 0
500 http://ftp.pl.debian.org/debian/ jessie/main i386 Packages
majsza@debian:~$Kod:
majsza@debian:~$ vlc VLC media player 2.1.2 Rincewind (revision 2.1.2-0-ga4c4876) [0x97a08f8] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc', aby używać vlc bez interfejsu. majsza@debian:~$ vlc VLC media player 2.1.2 Rincewind (revision 2.1.2-0-ga4c4876) [0x978a8f8] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc', aby używać vlc bez interfejsu. Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0x97b7c80] xcb_xv vout display error: no available XVideo adaptor Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0x97b7c80] main vout display error: Failed to resize display [0x97b7c80] main vout display error: Failed to resize display
[url=http://postimage.org/][img]http://s28.postimg.org/opi2x9ss9/powered_debian.png[/img][/url][url=http://postimage.org/][img]http://s23.postimg.org/6d2jegeqv/xubuntu_napl.jpg[/img][/url]
Offline
#4 2014-02-06 19:00:57
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Ustaw na inne wyjscie video w vlc
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#5 2014-02-06 19:09:47
majsza - Użytkownik
- majsza
- Użytkownik
- Skąd: Łowicz
- Zarejestrowany: 2011-05-14
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Po zmianie na X11 da się oglądać, przewijać, powiększyć na cały ekran itp.
A wyniki:
Kod:
majsza@debian:~$ vlc VLC media player 2.1.2 Rincewind (revision 2.1.2-0-ga4c4876) [0x8d718f8] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc', aby używać vlc bez interfejsu. Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0x8d9e3a0] main vout display error: Failed to resize display [0x8d98120] access_http access error: error: HTTP/1.1 403 Forbidden [0x8d98120] access_http access error: error: HTTP/1.1 403 Forbidden [0x8d98120] access_mms access error: error: HTTP/1.1 400 Invalid Request [0x8d9d0b8] main demux meta error: no suitable access module for `http://services.tvrage.com/feeds/search.php?show=The Wire'
[url=http://postimage.org/][img]http://s28.postimg.org/opi2x9ss9/powered_debian.png[/img][/url][url=http://postimage.org/][img]http://s23.postimg.org/6d2jegeqv/xubuntu_napl.jpg[/img][/url]
Offline
#6 2014-02-06 19:13:28
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Wywaliłeś configi vlc po tamtym ?
~/.config/vlc i ~/.local/share/vlc
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#7 2014-02-06 19:37:24
majsza - Użytkownik
- majsza
- Użytkownik
- Skąd: Łowicz
- Zarejestrowany: 2011-05-14
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Tak, kasuję je często i przestawiam tylko wyjścia video, dla testów.
Tutaj w kolejności odpowiednie wyjścia: ustawienie domyślne, X11 i OpenGL
Kod:
majsza@debian:~$ vlc VLC media player 2.1.2 Rincewind (revision 2.1.2-0-ga4c4876) [0x84498f8] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc', aby używać vlc bez interfejsu. Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0x8479ca8] access_http access error: error: HTTP/1.1 403 Forbidden [0x8479ca8] access_http access error: error: HTTP/1.1 403 Forbidden [0x8479ca8] access_mms access error: error: HTTP/1.1 400 Invalid Request [0x84790a8] main demux meta error: no suitable access module for `http://services.tvrage.com/feeds/search.php?show=The Wire' [0x8470070] main vout display error: Failed to resize display [mpeg4 @ 0xb4a0e680] header damaged [mpeg4 @ 0xb4a0e680] header damaged [mpeg4 @ 0xb4a0e680] header damaged [mpeg4 @ 0xb4a0e680] header damaged [mpeg4 @ 0xb4a0e680] header damaged [mpeg4 @ 0xb4a0e680] header damaged [mpeg4 @ 0xb4a0e680] header damaged
Kod:
LC media player 2.1.2 Rincewind (revision 2.1.2-0-ga4c4876) [0x86138f8] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc', aby używać vlc bez interfejsu. Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0x863b718] main vout display error: Failed to resize display [0x863efc0] access_http access error: error: HTTP/1.1 403 Forbidden [0x863efc0] access_http access error: error: HTTP/1.1 403 Forbidden [0x863efc0] access_mms access error: error: HTTP/1.1 400 Invalid Request [0x8643f08] main demux meta error: no suitable access module for `http://services.tvrage.com/feeds/search.php?show=The Wire' [0x863b718] main vout display error: Failed to resize display
Kod:
LC media player 2.1.2 Rincewind (revision 2.1.2-0-ga4c4876) [0x847d8f8] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc', aby używać vlc bez interfejsu. Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0xb4a37b40] main vout display error: Failed to resize display [mpeg4 @ 0xb4a0ea00] header damaged [mpeg4 @ 0xb4a0ea00] header damaged [mpeg4 @ 0xb4a0ea00] header damaged [mpeg4 @ 0xb4a0ea00] header damaged [mpeg4 @ 0xb4a0ea00] header damaged [mpeg4 @ 0xb4a0ea00] header damaged
Na tym samym filmie...
Ostatnio edytowany przez majsza (2014-02-06 19:37:55)
[url=http://postimage.org/][img]http://s28.postimg.org/opi2x9ss9/powered_debian.png[/img][/url][url=http://postimage.org/][img]http://s23.postimg.org/6d2jegeqv/xubuntu_napl.jpg[/img][/url]
Offline
#8 2014-02-06 19:45:07
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Na innym filmie też tak sypie ?
Może ten plik nie jest do końca poprawny.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#9 2014-02-06 19:53:17
majsza - Użytkownik
- majsza
- Użytkownik
- Skąd: Łowicz
- Zarejestrowany: 2011-05-14
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Pewnie masz rację. Na innych filmach powtarzają się tylko błędy z pierwszej połowy. Na wyjściach automatyczne i open gl, poklatkowany obraz. Na X11 da się oglądać:
Kod:
Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" Fontconfig warning: FcPattern object size does not accept value "0" [0x9a507a8] main vout display error: Failed to resize display [0x9a507a8] main vout display error: Failed to resize display majsza@debian:~$
Ostatnio edytowany przez majsza (2014-02-06 19:53:59)
[url=http://postimage.org/][img]http://s28.postimg.org/opi2x9ss9/powered_debian.png[/img][/url][url=http://postimage.org/][img]http://s23.postimg.org/6d2jegeqv/xubuntu_napl.jpg[/img][/url]
Offline
#10 2014-02-06 20:14:26
lis6502 - Łowca lamerów
- lis6502
- Łowca lamerów
- Skąd: Stalinogród
- Zarejestrowany: 2008-12-04
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Na wyjściach automatyczne i open gl, poklatkowany obraz[/quote]
co sugerowałoby jaja ze sterownikami. Zarzuć dmesgiem i xorg.logiem? A nuż ten Radek zasługuje na firegl a Ty piłujesz go na Radeonie bez kmsa i zadala od niewolnego firmware?
No i jeszcze proponuję testowac na jednym filmie, co do którego masz pewność że jest kodek-spójny, bez błędów, najlepiej mp4 z jutuba. Wybierz sobie jakieś jedno, wgetnij lokalnie i możemy rozmawiać ;)Ostatnio edytowany przez lis6502 (2014-02-06 20:17:07)
Offline
#11 2014-02-06 20:43:26
majsza - Użytkownik
- majsza
- Użytkownik
- Skąd: Łowicz
- Zarejestrowany: 2011-05-14
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Hmmmm.....
Kod:
[ 10.506042] radeon 0000:01:05.0: firmware: failed to load radeon/R300_cp.bin (-2) [ 10.546704] [drm:r100_cp_init] *ERROR* Failed to load firmware! [ 10.546771] radeon 0000:01:05.0: failed initializing CP (-2). [ 10.546820] radeon 0000:01:05.0: Disabling GPU acceleration [ 10.546872] [drm] radeon: cp finalized [ 10.547850] [drm] Panel ID String: SEC [ 10.547909] [drm] Panel Size 1280x800 [ 10.572299] [drm] radeon legacy LVDS backlight initialized [ 10.572353] [drm] Radeon Display Connectors [ 10.572400] [drm] Connector 0: [ 10.572446] [drm] VGA-1 [ 10.572493] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 10.572541] [drm] Encoders: [ 10.572587] [drm] CRT1: INTERNAL_DAC2
Cały tutaj:
http://wklej.org/id/1264458/
Xorg.log
Kod:
[ 24.466]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 24.466] X Protocol Version 11, Revision 0
[ 24.466] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 24.466] Current Operating System: Linux debian 3.12-1-486 #1 Debian 3.12.9-1 (2014-02-01) i686
[ 24.466] Kernel command line: BOOT_IMAGE=/vmlinuz.old root=/dev/sda8 ro
[ 24.467] Build Date: 13 December 2013 10:45:09AM
[ 24.467] xorg-server 2:1.14.5-1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[ 24.467] Current version of pixman: 0.32.4
[ 24.467] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.467] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.467] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 6 19:21:18 2014
[ 24.490] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.575] (==) No Layout section. Using the first Screen section.
[ 24.575] (==) No screen section available. Using defaults.
[ 24.575] (**) |-->Screen "Default Screen Section" (0)
[ 24.575] (**) | |-->Monitor "<default monitor>"
[ 24.583] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.583] (==) Automatically adding devices
[ 24.583] (==) Automatically enabling devices
[ 24.583] (==) Automatically adding GPU devices
[ 24.631] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 24.631] Entry deleted from font path.
[ 24.658] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 24.658] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.658] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.658] (II) Loader magic: 0xb77216a0
[ 24.658] (II) Module ABI versions:
[ 24.658] X.Org ANSI C Emulation: 0.4
[ 24.658] X.Org Video Driver: 14.1
[ 24.658] X.Org XInput driver : 19.1
[ 24.658] X.Org Server Extension : 7.0
[ 24.658] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 24.660] (--) PCI:*(0:1:5:0) 1002:5a62:1179:ff31 rev 0, Mem @ 0xd0000000/268435456, 0xc0000000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 24.661] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24.661] Initializing built-in extension Generic Event Extension
[ 24.661] Initializing built-in extension SHAPE
[ 24.661] Initializing built-in extension MIT-SHM
[ 24.661] Initializing built-in extension XInputExtension
[ 24.661] Initializing built-in extension XTEST
[ 24.661] Initializing built-in extension BIG-REQUESTS
[ 24.661] Initializing built-in extension SYNC
[ 24.661] Initializing built-in extension XKEYBOARD
[ 24.661] Initializing built-in extension XC-MISC
[ 24.661] Initializing built-in extension SECURITY
[ 24.661] Initializing built-in extension XINERAMA
[ 24.661] Initializing built-in extension XFIXES
[ 24.661] Initializing built-in extension RENDER
[ 24.661] Initializing built-in extension RANDR
[ 24.661] Initializing built-in extension COMPOSITE
[ 24.661] Initializing built-in extension DAMAGE
[ 24.661] Initializing built-in extension MIT-SCREEN-SAVER
[ 24.661] Initializing built-in extension DOUBLE-BUFFER
[ 24.661] Initializing built-in extension RECORD
[ 24.661] Initializing built-in extension DPMS
[ 24.661] Initializing built-in extension X-Resource
[ 24.661] Initializing built-in extension XVideo
[ 24.661] Initializing built-in extension XVideo-MotionCompensation
[ 24.661] Initializing built-in extension SELinux
[ 24.661] Initializing built-in extension XFree86-VidModeExtension
[ 24.662] Initializing built-in extension XFree86-DGA
[ 24.662] Initializing built-in extension XFree86-DRI
[ 24.662] Initializing built-in extension DRI2
[ 24.662] (II) LoadModule: "glx"
[ 24.684] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.742] (II) Module glx: vendor="X.Org Foundation"
[ 24.742] compiled for 1.14.5, module version = 1.0.0
[ 24.742] ABI class: X.Org Server Extension, version 7.0
[ 24.742] (==) AIGLX enabled
[ 24.743] Loading extension GLX
[ 24.743] (==) Matched ati as autoconfigured driver 0
[ 24.743] (==) Matched ati as autoconfigured driver 1
[ 24.743] (==) Matched vesa as autoconfigured driver 2
[ 24.743] (==) Matched modesetting as autoconfigured driver 3
[ 24.743] (==) Matched fbdev as autoconfigured driver 4
[ 24.743] (==) Assigned the driver to the xf86ConfigLayout
[ 24.743] (II) LoadModule: "ati"
[ 24.743] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 24.754] (II) Module ati: vendor="X.Org Foundation"
[ 24.754] compiled for 1.14.3, module version = 7.2.0
[ 24.754] Module class: X.Org Video Driver
[ 24.754] ABI class: X.Org Video Driver, version 14.1
[ 24.754] (II) LoadModule: "radeon"
[ 24.754] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 24.827] (II) Module radeon: vendor="X.Org Foundation"
[ 24.827] compiled for 1.14.3, module version = 7.2.0
[ 24.827] Module class: X.Org Video Driver
[ 24.827] ABI class: X.Org Video Driver, version 14.1
[ 24.827] (II) LoadModule: "vesa"
[ 24.827] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.839] (II) Module vesa: vendor="X.Org Foundation"
[ 24.839] compiled for 1.14.3, module version = 2.3.3
[ 24.839] Module class: X.Org Video Driver
[ 24.839] ABI class: X.Org Video Driver, version 14.1
[ 24.839] (II) LoadModule: "modesetting"
[ 24.839] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.840] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.840] compiled for 1.14.3, module version = 0.8.1
[ 24.840] Module class: X.Org Video Driver
[ 24.840] ABI class: X.Org Video Driver, version 14.1
[ 24.840] (II) LoadModule: "fbdev"
[ 24.840] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 24.841] (II) Module fbdev: vendor="X.Org Foundation"
[ 24.841] compiled for 1.14.3, module version = 0.4.4
[ 24.841] Module class: X.Org Video Driver
[ 24.841] ABI class: X.Org Video Driver, version 14.1
[ 24.841] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI
[ 24.848] (II) VESA: driver for VESA chipsets: vesa
[ 24.848] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 24.848] (II) FBDEV: driver for framebuffer: fbdev
[ 24.848] (++) using VT number 7
[ 25.093] (II) [KMS] Kernel modesetting enabled.
[ 25.093] (WW) Falling back to old probe method for vesa
[ 25.093] (WW) Falling back to old probe method for modesetting
[ 25.093] (WW) Falling back to old probe method for fbdev
[ 25.093] (II) Loading sub module "fbdevhw"
[ 25.093] (II) LoadModule: "fbdevhw"
[ 25.093] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.129] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.129] compiled for 1.14.5, module version = 0.0.2
[ 25.129] ABI class: X.Org Video Driver, version 14.1
[ 25.129] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 25.129] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 25.129] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 25.129] (==) RADEON(0): Default visual is TrueColor
[ 25.129] (==) RADEON(0): RGB weight 888
[ 25.129] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 25.129] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5A62 (PCIE)" (ChipID = 0x5a62)
[ 25.129] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
[ 25.129] (II) Loading sub module "shadow"
[ 25.129] (II) LoadModule: "shadow"
[ 25.130] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 25.130] (II) Module shadow: vendor="X.Org Foundation"
[ 25.130] compiled for 1.14.5, module version = 1.1.0
[ 25.130] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.130] (II) RADEON(0): KMS Color Tiling: disabled
[ 25.130] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 25.130] (II) RADEON(0): KMS Pageflipping: enabled
[ 25.130] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 25.155] (II) RADEON(0): Output VGA-0 has no monitor section
[ 25.155] (II) RADEON(0): Output LVDS has no monitor section
[ 25.179] (II) RADEON(0): EDID for output VGA-0
[ 25.179] (II) RADEON(0): EDID for output LVDS
[ 25.179] (II) RADEON(0): Manufacturer: SEC Model: 3641 Serial#: 0
[ 25.179] (II) RADEON(0): Year: 2005 Week: 0
[ 25.179] (II) RADEON(0): EDID Version: 1.3
[ 25.179] (II) RADEON(0): Digital Display Input
[ 25.179] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 25.179] (II) RADEON(0): Gamma: 2.20
[ 25.179] (II) RADEON(0): No DPMS capabilities specified
[ 25.179] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.179] (II) RADEON(0): First detailed timing is preferred mode
[ 25.179] (II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 25.179] (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 25.179] (II) RADEON(0): Manufacturer's mask: 0
[ 25.179] (II) RADEON(0): Supported detailed timing:
[ 25.179] (II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 25.179] (II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
[ 25.179] (II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 25.179] (II) RADEON(0): Unknown vendor-specific block f
[ 25.179] (II) RADEON(0): SAMSUNG
[ 25.179] (II) RADEON(0): LTN154X3-L06
[ 25.179] (II) RADEON(0): EDID (in hex):
[ 25.179] (II) RADEON(0): 00ffffffffffff004ca3413600000000
[ 25.179] (II) RADEON(0): 000f0103802115780a87f594574f8c27
[ 25.179] (II) RADEON(0): 27505400000001010101010101010101
[ 25.179] (II) RADEON(0): 010101010101ee1a0080502010301030
[ 25.179] (II) RADEON(0): 13004bcf100000190000000f00000000
[ 25.179] (II) RADEON(0): 00000000002387026402000000fe0053
[ 25.179] (II) RADEON(0): 414d53554e470a2020202020000000fe
[ 25.179] (II) RADEON(0): 004c544e31353458332d4c30360a0062
[ 25.179] (II) RADEON(0): Printing probed modes for output LVDS
[ 25.179] (II) RADEON(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 25.179] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 25.179] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 25.180] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 25.180] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 25.180] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 25.180] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 25.180] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 25.180] (II) RADEON(0): Output VGA-0 disconnected
[ 25.180] (II) RADEON(0): Output LVDS connected
[ 25.180] (II) RADEON(0): Using exact sizes for initial modes
[ 25.180] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 25.180] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.180] (II) RADEON(0): mem size init: gart size :1feff000 vram size: s:8000000 visible:fbd8000
[ 25.180] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 25.180] (==) RADEON(0): DPI set to (96, 96)
[ 25.180] (II) Loading sub module "fb"
[ 25.180] (II) LoadModule: "fb"
[ 25.180] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.371] (II) Module fb: vendor="X.Org Foundation"
[ 25.371] compiled for 1.14.5, module version = 1.0.0
[ 25.371] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.371] (II) Loading sub module "ramdac"
[ 25.371] (II) LoadModule: "ramdac"
[ 25.372] (II) Module "ramdac" already built-in
[ 25.372] (II) UnloadModule: "vesa"
[ 25.372] (II) Unloading vesa
[ 25.372] (II) UnloadModule: "modesetting"
[ 25.372] (II) Unloading modesetting
[ 25.372] (II) UnloadModule: "fbdev"
[ 25.372] (II) Unloading fbdev
[ 25.372] (II) UnloadSubModule: "fbdevhw"
[ 25.372] (II) Unloading fbdevhw
[ 25.372] (--) Depth 24 pixmap format is 32 bpp
[ 25.373] (II) RADEON(0): Front buffer size: 4000K
[ 25.373] (II) RADEON(0): VRAM usage limit set to 228470K
[ 25.391] (==) RADEON(0): Backing store disabled
[ 25.391] (WW) RADEON(0): Direct rendering disabled
[ 25.391] (II) RADEON(0): Acceleration disabled
[ 25.391] (==) RADEON(0): DPMS enabled
[ 25.391] (==) RADEON(0): Silken mouse enabled
[ 25.391] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.392] (--) RandR disabled
[ 25.410] (II) SELinux: Disabled on system
[ 25.411] (II) AIGLX: Screen 0 is not DRI2 capable
[ 25.411] (II) AIGLX: Screen 0 is not DRI capable
[ 26.974] (II) AIGLX: Loaded and initialized swrast
[ 26.974] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 26.987] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 27.736] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 27.736] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.736] (II) LoadModule: "evdev"
[ 27.737] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.751] (II) Module evdev: vendor="X.Org Foundation"
[ 27.751] compiled for 1.14.3, module version = 2.8.2
[ 27.751] Module class: X.Org XInput Driver
[ 27.751] ABI class: X.Org XInput driver, version 19.1
[ 27.751] (II) Using input driver 'evdev' for 'Power Button'
[ 27.751] (**) Power Button: always reports core events
[ 27.751] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 27.751] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.751] (--) evdev: Power Button: Found keys
[ 27.751] (II) evdev: Power Button: Configuring as keyboard
[ 27.751] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 27.751] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.751] (**) Option "xkb_rules" "evdev"
[ 27.751] (**) Option "xkb_model" "pc105"
[ 27.751] (**) Option "xkb_layout" "pl"
[ 27.821] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 27.821] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.821] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.821] (**) Video Bus: always reports core events
[ 27.821] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 27.821] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.821] (--) evdev: Video Bus: Found keys
[ 27.821] (II) evdev: Video Bus: Configuring as keyboard
[ 27.821] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/LNXVIDEO:00/input/input6/event5"
[ 27.821] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.821] (**) Option "xkb_rules" "evdev"
[ 27.821] (**) Option "xkb_model" "pc105"
[ 27.821] (**) Option "xkb_layout" "pl"
[ 27.822] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 27.822] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.822] (II) Using input driver 'evdev' for 'Power Button'
[ 27.822] (**) Power Button: always reports core events
[ 27.822] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 27.822] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.822] (--) evdev: Power Button: Found keys
[ 27.822] (II) evdev: Power Button: Configuring as keyboard
[ 27.822] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event3"
[ 27.822] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 27.822] (**) Option "xkb_rules" "evdev"
[ 27.822] (**) Option "xkb_model" "pc105"
[ 27.822] (**) Option "xkb_layout" "pl"
[ 27.823] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 27.823] (II) No input driver specified, ignoring this device.
[ 27.823] (II) This device may have been added with another device file.
[ 27.823] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 27.824] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[ 27.824] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 27.824] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 27.824] (**) USB Optical Mouse: always reports core events
[ 27.824] (**) evdev: USB Optical Mouse: Device: "/dev/input/event1"
[ 27.824] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x7
[ 27.824] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 27.824] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 27.824] (--) evdev: USB Optical Mouse: Found relative axes
[ 27.824] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 27.824] (--) evdev: USB Optical Mouse: Found absolute axes
[ 27.824] (II) evdev: USB Optical Mouse: Forcing absolute x/y axes to exist.
[ 27.824] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 27.824] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 27.824] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 27.824] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input2/event1"
[ 27.824] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 9)
[ 27.824] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 27.824] (WW) evdev: USB Optical Mouse: ignoring absolute axes.
[ 27.825] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 27.825] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 27.825] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 27.825] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 27.825] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 27.825] (II) No input driver specified, ignoring this device.
[ 27.825] (II) This device may have been added with another device file.
[ 27.825] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 27.826] (II) No input driver specified, ignoring this device.
[ 27.826] (II) This device may have been added with another device file.
[ 27.826] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event10)
[ 27.826] (II) No input driver specified, ignoring this device.
[ 27.826] (II) This device may have been added with another device file.
[ 27.826] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event9)
[ 27.826] (II) No input driver specified, ignoring this device.
[ 27.826] (II) This device may have been added with another device file.
[ 27.827] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 27.827] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.827] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.827] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.827] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 27.827] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 27.827] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 27.827] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.827] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 27.827] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 27.827] (**) Option "xkb_rules" "evdev"
[ 27.827] (**) Option "xkb_model" "pc105"
[ 27.827] (**) Option "xkb_layout" "pl"
[ 27.828] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 27.828] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 27.828] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 27.828] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 27.828] (II) LoadModule: "synaptics"
[ 27.828] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.839] (II) Module synaptics: vendor="X.Org Foundation"
[ 27.839] compiled for 1.14.5, module version = 1.7.3
[ 27.839] Module class: X.Org XInput Driver
[ 27.839] ABI class: X.Org XInput driver, version 19.1
[ 27.839] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 27.840] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.840] (**) Option "Device" "/dev/input/event7"
[ 27.840] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 85)
[ 27.840] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 94)
[ 27.840] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 27.840] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 27.840] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 27.840] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 27.840] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.840] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.840] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 27.840] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 27.840] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 27.840] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 27.840] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 27.840] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 27.840] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 27.840] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 27.840] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 27.840] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.841] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 27.841] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 27.842] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event11)
[ 27.842] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 27.842] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 27.842] (**) ACPI Virtual Keyboard Device: always reports core events
[ 27.842] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event11"
[ 27.842] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 27.842] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 27.842] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 27.842] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event11"
[ 27.842] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[ 27.842] (**) Option "xkb_rules" "evdev"
[ 27.842] (**) Option "xkb_model" "pc105"
[ 27.842] (**) Option "xkb_layout" "pl"
[ 27.843] (II) config/udev: Adding input device Toshiba input device (/dev/input/event6)
[ 27.843] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[ 27.843] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 27.843] (**) Toshiba input device: always reports core events
[ 27.843] (**) evdev: Toshiba input device: Device: "/dev/input/event6"
[ 27.843] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 27.843] (--) evdev: Toshiba input device: Found keys
[ 27.843] (II) evdev: Toshiba input device: Configuring as keyboard
[ 27.843] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event6"
[ 27.843] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 13)
[ 27.843] (**) Option "xkb_rules" "evdev"
[ 27.843] (**) Option "xkb_model" "pc105"
[ 27.843] (**) Option "xkb_layout" "pl"
[ 47.550] (II) RADEON(0): EDID vendor "SEC", prod id 13889
[ 47.550] (II) RADEON(0): Printing DDC gathered Modelines:
[ 47.550] (II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 60.745] (II) RADEON(0): EDID vendor "SEC", prod id 13889
[ 60.745] (II) RADEON(0): Printing DDC gathered Modelines:
[ 60.745] (II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 60.769] (II) RADEON(0): EDID vendor "SEC", prod id 13889
[ 60.769] (II) RADEON(0): Printing DDC gathered Modelines:
[ 60.769] (II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)[url=http://postimage.org/][img]http://s28.postimg.org/opi2x9ss9/powered_debian.png[/img][/url][url=http://postimage.org/][img]http://s23.postimg.org/6d2jegeqv/xubuntu_napl.jpg[/img][/url]
Offline
#12 2014-02-06 20:50:21
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
[ 10.546704] [drm:r100_cp_init] *ERROR* Failed to load firmware![/quote]
Pokaż wynik:Kod:
aptitude search firmware~i
Offline
#13 2014-02-06 20:53:55
majsza - Użytkownik
- majsza
- Użytkownik
- Skąd: Łowicz
- Zarejestrowany: 2011-05-14
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Kod:
i firmware-linux-free - Firmware binarne do różnych sterowników w
[url=http://postimage.org/][img]http://s28.postimg.org/opi2x9ss9/powered_debian.png[/img][/url][url=http://postimage.org/][img]http://s23.postimg.org/6d2jegeqv/xubuntu_napl.jpg[/img][/url]
Offline
#14 2014-02-06 20:55:04
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Kod:
aptitude install firmware-linux-nonfree
Po instalacji zrestartuj kompa.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#15 2014-02-06 20:56:31
lis6502 - Łowca lamerów
- lis6502
- Łowca lamerów
- Skąd: Stalinogród
- Zarejestrowany: 2008-12-04
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Bullseye ;) W moim przypadku (RV200/R100) podniosło to wydajność niewiele, ale ja mam lapka z początku millenium :P
Offline
#16 2014-02-06 21:17:13
majsza - Użytkownik
- majsza
- Użytkownik
- Skąd: Łowicz
- Zarejestrowany: 2011-05-14
Re: VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
[quote=ilin]
Kod:
aptitude install firmware-linux-nonfree
Po instalacji zrestartuj kompa.[/quote]
Dzięki, Wam wszystkim :). Teraz na ustawieniach Automatyczne i OpenGL (eksperymentalnie) filmy nie powodują kłopotów.
Ostatnio edytowany przez majsza (2014-02-06 21:19:21)
[url=http://postimage.org/][img]http://s28.postimg.org/opi2x9ss9/powered_debian.png[/img][/url][url=http://postimage.org/][img]http://s23.postimg.org/6d2jegeqv/xubuntu_napl.jpg[/img][/url]
Offline
Strony: 1
- Forum Debian Users Gang
- » Multimedia
- » VLC- błędy po uruchomieniu, czarny ekran w trybie fullscreen
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00010 | SET CHARSET latin2 |
| 0.00005 | SET NAMES latin2 |
| 0.00083 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.147.68.201' WHERE u.id=1 |
| 0.00078 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.147.68.201', 1732245192) |
| 0.00050 | SELECT * FROM punbb_online WHERE logged<1732244892 |
| 0.00054 | SELECT topic_id FROM punbb_posts WHERE id=255208 |
| 0.00125 | SELECT id FROM punbb_posts WHERE topic_id=25167 ORDER BY posted |
| 0.00075 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=25167 AND t.moved_to IS NULL |
| 0.00010 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00243 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=25167 ORDER BY p.id LIMIT 0,25 |
| 0.00094 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=25167 |
| Total query time: 0.00827 s | |