Forum Debian Users Gang

Polskie forum dyskusyjne miłośników dystrybucji Debian GNU/Linux

Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1 2 3 … 5 ▶

#1 2014-02-13 19:39:52

Debusr - Użytkownik

Debusr: Użytkownik; Skąd: Gdańsk; Zarejestrowany: 2013-04-28

2 karty graficzne intel ati

Witam wszystkich
Mam zapytanie posiadam nowego lapka jest to lenovo g500 cpu 1005m 1.9g
posiada on 2 karty graficzne intela i ati
jaki sterownik mam zainstalowac zeby byla oblusga opengl i wszystko ladnie smigalo
pisze o tym na forum dlatego ze jest to moj 1 laptop ktory posiada 2 karty i mam na nim debiana 7
co zainstalowac zeby bylo wszystko ok : ) dziekuje za pomoc
Wyniki

lspci =

Kod:

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI Device 6663
02:00.0 Ethernet controller: Atheros Communications Inc. Device 10a0 (rev 10)

lspci |grep VGA

Kod:

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)

Offline

#2 2014-02-13 19:51:14

garrick - Użytkownik

garrick: Użytkownik; Zarejestrowany: 2013-12-30

Re: 2 karty graficzne intel ati

Kod:
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
[/quote]
co pokazuje:
Kod:
glxinfo | grep -i opengl
?
Debian/xfce/*box

[url=https://docs.google.com/document/d/1J2tqbLFvsfIAh9QaagiLQWFMoN6CxPsGmo9jRVW7Klk/edit?usp=sharing][img]http://s18.postimg.org/x7bxep3t1/res.gif[/img][/url]

Offline

#3 2014-02-13 19:54:02

Debusr - Użytkownik

Debusr: Użytkownik; Skąd: Gdańsk; Zarejestrowany: 2013-04-28

Re: 2 karty graficzne intel ati

Kod:

damianek@DamianDeb:~$ glxinfo | grep -i opengl
bash: glxinfo: nie znaleziono polecenia
damianek@DamianDeb:~$

Offline

#4 2014-02-13 19:56:37

garrick - Użytkownik

garrick: Użytkownik; Zarejestrowany: 2013-12-30

Re: 2 karty graficzne intel ati

zainstaluj mesa-utils

edit:
ale obraz masz,znaczy xsy sie uruchamiaja? ;]

Ostatnio edytowany przez garrick (2014-02-13 19:59:01)

Debian/xfce/*box

[url=https://docs.google.com/document/d/1J2tqbLFvsfIAh9QaagiLQWFMoN6CxPsGmo9jRVW7Klk/edit?usp=sharing][img]http://s18.postimg.org/x7bxep3t1/res.gif[/img][/url]

Offline

#5 2014-02-13 19:59:10

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: 2 karty graficzne intel ati

Pierwsza sprawa — Debian 7 jest trochę za stary na ten sprzęt.

Offline

#6 2014-02-13 20:01:45

fervi - Użytkownik

fervi: Użytkownik; Zarejestrowany: 2010-03-14

Re: 2 karty graficzne intel ati

Najlepiej wgrać Debiana Jessie i od niego zaczniemy

Wystarczą ci otwarte sterowniki czy chcesz męczyć zamknięte? (o tych drugich nie mam żadnego pojęcia, o pierwszych minimalne :D)

Fervi

Offline

#7 2014-02-13 20:05:39

Debusr - Użytkownik

Debusr: Użytkownik; Skąd: Gdańsk; Zarejestrowany: 2013-04-28

Re: 2 karty graficzne intel ati

obojetne mi to wazne zeby chodzil czyli zrobic update do testinga tak ? : )
mi tylko zalezy na tym eby mi cs chodzil tibia i inne programy wymagajace opengl oraz programy : P

[quote=garrick]zainstaluj mesa-utils

edit:
ale obraz masz,znaczy xsy sie uruchamiaja? ;][/quote]
tak zdziwilem sie ze nawet nic mi nie plywa ; p bez sterownika

Offline

#8 2014-02-13 20:07:28

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: 2 karty graficzne intel ati

To na razie masz dwie opcje.
Zamknięte sterowniki, one powinny obsługiwać te dwie karty.

Jak stery zadziałają z nowszym kernelem z backportow to z nim powinno być lepiej to obsługiwane.

Jak to nie zadziała to rozważ aktualizacje do testinga.

Offline

#9 2014-02-13 20:11:04

garrick - Użytkownik

garrick: Użytkownik; Zarejestrowany: 2013-12-30

Re: 2 karty graficzne intel ati

[quote=Debusr][quote=garrick]zainstaluj mesa-utils

edit:
ale obraz masz,znaczy xsy sie uruchamiaja? ;][/quote]
tak zdziwilem sie ze nawet nic mi nie plywa ; p bez sterownika[/quote]
to masz chyba ves'e taki uniwersalny sterownik, wg mnie najlepiej zaintaluj testing tak jak inni radza :)

Debian/xfce/*box

[url=https://docs.google.com/document/d/1J2tqbLFvsfIAh9QaagiLQWFMoN6CxPsGmo9jRVW7Klk/edit?usp=sharing][img]http://s18.postimg.org/x7bxep3t1/res.gif[/img][/url]

Offline

#10 2014-02-13 20:13:24

Debusr - Użytkownik

Debusr: Użytkownik; Skąd: Gdańsk; Zarejestrowany: 2013-04-28

Re: 2 karty graficzne intel ati

Czyli standardowo zainstalowac fglrx tak Yossarian ?
jaie intelowska karta ma to nie mam pojecia

Offline

#11 2014-02-13 20:18:24

garrick - Użytkownik

garrick: Użytkownik; Zarejestrowany: 2013-12-30

Re: 2 karty graficzne intel ati

[quote=Debusr]Czyli standardowo zainstalowac fglrx tak Yossarian ?
jaie intelowska karta ma to nie mam pojecia[/quote]
jezeli bedziesz chcial korzystac ze sterownikow otwartych i zainstalujesz/zaktualizujesz system do wersji testing
to raczej powinno Ci samo się skonfigurować ale reki nie dam sobie uciac ;p

Debian/xfce/*box

[url=https://docs.google.com/document/d/1J2tqbLFvsfIAh9QaagiLQWFMoN6CxPsGmo9jRVW7Klk/edit?usp=sharing][img]http://s18.postimg.org/x7bxep3t1/res.gif[/img][/url]

Offline

#12 2014-02-13 20:18:46

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: 2 karty graficzne intel ati

[deb]fglrx-driver[/deb]
No właśnie do tej intelowskiej by sie przydał testing.
Chyba że wystarczy Ci używanie samej karty AMD.
Wtedy ją sobie ustawisz w opcjach sterownika i może będzie ok.

Offline

#13 2014-02-13 20:25:27

Debusr - Użytkownik

Debusr: Użytkownik; Skąd: Gdańsk; Zarejestrowany: 2013-04-28

Re: 2 karty graficzne intel ati

zrobie pozniej update do testinga i zainstaluje fglrx zobaczymy co z tego wyjdzie dziekuje wam bardzo napisze jak wszystko zrobie postaram sie jak najszybciej

Offline

#14 2014-02-13 20:29:03

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: 2 karty graficzne intel ati

Na testingu bezpieczniej będzie z otwartymi sterownikami.

Offline

#15 2014-02-13 21:14:31

fervi - Użytkownik

fervi: Użytkownik; Zarejestrowany: 2010-03-14

Re: 2 karty graficzne intel ati

Ogólnie bezpieczniej z otwartymi, bo są wbudowane, a nie od Turków z AMD za miskę kebaba

Po zaktualizowaniu
xrandr --listproviders

Fervi

Offline

#16 2014-02-13 23:42:34

uzytkownikubunt - Zbanowany

uzytkownikubunt: Zbanowany; Zarejestrowany: 2012-04-25

Re: 2 karty graficzne intel ati

452

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 00:45:04)

Offline

#17 2014-02-14 00:11:32

garrick - Użytkownik

garrick: Użytkownik; Zarejestrowany: 2013-12-30

Re: 2 karty graficzne intel ati

te gry co napisał nie wymagają zamkniętych sterowników (czyt. na nic im wsparcie zamkniętych) z tego co pamietam
to korzystają z biblotek mesy ale moge sie mylic i chyba sa to aplikacje 32 bitowe (tibia na pewno)

Debian/xfce/*box

[url=https://docs.google.com/document/d/1J2tqbLFvsfIAh9QaagiLQWFMoN6CxPsGmo9jRVW7Klk/edit?usp=sharing][img]http://s18.postimg.org/x7bxep3t1/res.gif[/img][/url]

Offline

#18 2014-02-14 00:19:34

uzytkownikubunt - Zbanowany

uzytkownikubunt: Zbanowany; Zarejestrowany: 2012-04-25

Re: 2 karty graficzne intel ati

455

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 00:45:07)

Offline

#19 2014-02-14 01:18:23

garrick - Użytkownik

garrick: Użytkownik; Zarejestrowany: 2013-12-30

Re: 2 karty graficzne intel ati

tu jest jak to zrobić z otwartoźródłowymi (przynajmniej dla archa)

[url]https://wiki.archlinux.org/index.php/hybrid_graphics[/url]

z tego co rozumiem potrzebny jest kernel >=3.12 (taki jest) reszte musisz sprawdzić sam

Debian/xfce/*box

[url=https://docs.google.com/document/d/1J2tqbLFvsfIAh9QaagiLQWFMoN6CxPsGmo9jRVW7Klk/edit?usp=sharing][img]http://s18.postimg.org/x7bxep3t1/res.gif[/img][/url]

Offline

#20 2014-02-14 01:22:54

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: 2 karty graficzne intel ati

@uzytkownikubunt:
To już powinno działać nawet w stable. AMD wspiera to od kilku lat.
Wystarczy zainstalować fglrx-driver i wybrać myszką lub w konsoli odpowiednia kartę. Przynajmniej w teorii bo nie mam takiej karty.
Tu masz przykład:
http://forums.gentoo.org/viewtopic-t-945668-start-0.html
Nie trzeba od razu instalować Ubuntu ;)

@Debusr:
Jak sie zdecydujesz na testing, to powinny wystarczyć otwarte sterowniki. Wydajność dla tych kart jest całkiem dobra i jest wtedy zdecydowanie mniej problemów.

@garrick:
Można jeszcze próbować tego:
https://wiki.archlinux.org/index.php/PRIME

Offline

#21 2014-02-14 22:52:14

Debusr - Użytkownik

Debusr: Użytkownik; Skąd: Gdańsk; Zarejestrowany: 2013-04-28

Re: 2 karty graficzne intel ati

Zdecydowalem sie na testinga : ) i jestem zaskoczony jak dobrze chodzi system lepiej niz stable
pytanie jest teraz takie nigdy nie instalowalem sterownikow otwartych mozna jakies
male info co zainstalowac na tym sprzecie zeby bylo ok ? : ))
Dzieki Yossarian za propozycje z tym tesing jestem zadowolony z cpu itp
Czekam na dalsze info dzieki wszystkim : ))
a na ubuntu nie zrobie przesiadki nie ma opcji ; p
przy starcie systemu cos mi wywala z karta ati to pewnie te sterowniki

Ostatnio edytowany przez Debusr (2014-02-14 23:02:55)

Offline

#22 2014-02-14 23:05:06

fervi - Użytkownik

fervi: Użytkownik; Zarejestrowany: 2010-03-14

Re: 2 karty graficzne intel ati

Otwarte sterowniki są po prostu w systemie wbudowane (w jądrze)

Najpierw zrób test
xrandr --listproviders

Prawdopodobnie dostaniesz Intel i Radeon, jeśli tak to

xrandr --setprovideroffloadsink radeon Intel

Jeśli bez problemu przejdzie to spróbuj
DRI_PRIME=0 glxinfo | grep "OpenGL renderer"
DRI_PRIME=1 glxinfo | grep "OpenGL renderer"

I daj wyniki (wszystko w jednej konsoli, ale po kolei)

Fervi

Offline

#23 2014-02-14 23:06:49

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: 2 karty graficzne intel ati

Pokaz jakieś logi ze startu systemu i logi xorga.
Jaką masz wersje jądra?

Przy aktywnym DPM Radeon sam się wyłączy i nie trzeba nic przełączać.

Offline

#24 2014-02-14 23:08:23

Debusr - Użytkownik

Debusr: Użytkownik; Skąd: Gdańsk; Zarejestrowany: 2013-04-28

Re: 2 karty graficzne intel ati

Kod:

damian@DamianDeb:~$ cat /etc/debian_version
jessie/sid
damian@DamianDeb:~$ uname -a
Linux DamianDeb 3.12-1-amd64 #1 SMP Debian 3.12.9-1 (2014-02-01) x86_64 GNU/Linux
damian@DamianDeb:~$ 

damian@DamianDeb:~$ xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x46 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 4 associated providers: 0 name:Intel
damian@DamianDeb:~$ xrandr --setprovideroffloadsink radeon Intel
Could not find provider with name radeon
damian@DamianDeb:~$

o ten log chodzi ?

Kod:

[    22.040] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[    22.040] X Protocol Version 11, Revision 0
[    22.040] Build Operating System: Linux 3.13.0-rc2-patser+ x86_64 Debian
[    22.040] Current Operating System: Linux DamianDeb 3.12-1-amd64 #1 SMP Debian 3.12.9-1 (2014-02-01) x86_64
[    22.040] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=c0dc5c06-0d9a-418e-bae8-25d17929faf0 ro quiet
[    22.040] Build Date: 13 December 2013  10:12:53AM
[    22.040] xorg-server 2:1.14.5-1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>) 
[    22.040] Current version of pixman: 0.32.4
[    22.040]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    22.040] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.040] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 14 22:43:03 2014
[    22.074] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.280] (==) No Layout section.  Using the first Screen section.
[    22.280] (==) No screen section available. Using defaults.
[    22.280] (**) |-->Screen "Default Screen Section" (0)
[    22.280] (**) |   |-->Monitor "<default monitor>"
[    22.280] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    22.280] (==) Automatically adding devices
[    22.280] (==) Automatically enabling devices
[    22.280] (==) Automatically adding GPU devices
[    22.328] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    22.328]     Entry deleted from font path.
[    22.411] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    22.411] (==) ModulePath set to "/usr/lib/xorg/modules"
[    22.411] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    22.411] (II) Loader magic: 0x7f77e5a4ed00
[    22.411] (II) Module ABI versions:
[    22.411]     X.Org ANSI C Emulation: 0.4
[    22.411]     X.Org Video Driver: 14.1
[    22.411]     X.Org XInput driver : 19.1
[    22.411]     X.Org Server Extension : 7.0
[    22.412] (II) xfree86: Adding drm device (/dev/dri/card0)
[    22.413] (--) PCI:*(0:0:2:0) 8086:0156:17aa:3800 rev 9, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[    22.414] (--) PCI: (0:1:0:0) 1002:6663:17aa:3800 rev 0, Mem @ 0xd0000000/134217728, 0xd8500000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    22.414] (II) Open ACPI successful (/var/run/acpid.socket)
[    22.600] Initializing built-in extension Generic Event Extension
[    22.600] Initializing built-in extension SHAPE
[    22.600] Initializing built-in extension MIT-SHM
[    22.600] Initializing built-in extension XInputExtension
[    22.600] Initializing built-in extension XTEST
[    22.600] Initializing built-in extension BIG-REQUESTS
[    22.600] Initializing built-in extension SYNC
[    22.600] Initializing built-in extension XKEYBOARD
[    22.600] Initializing built-in extension XC-MISC
[    22.600] Initializing built-in extension SECURITY
[    22.600] Initializing built-in extension XINERAMA
[    22.600] Initializing built-in extension XFIXES
[    22.600] Initializing built-in extension RENDER
[    22.600] Initializing built-in extension RANDR
[    22.600] Initializing built-in extension COMPOSITE
[    22.600] Initializing built-in extension DAMAGE
[    22.600] Initializing built-in extension MIT-SCREEN-SAVER
[    22.600] Initializing built-in extension DOUBLE-BUFFER
[    22.600] Initializing built-in extension RECORD
[    22.600] Initializing built-in extension DPMS
[    22.600] Initializing built-in extension X-Resource
[    22.600] Initializing built-in extension XVideo
[    22.600] Initializing built-in extension XVideo-MotionCompensation
[    22.600] Initializing built-in extension SELinux
[    22.600] Initializing built-in extension XFree86-VidModeExtension
[    22.601] Initializing built-in extension XFree86-DGA
[    22.601] Initializing built-in extension XFree86-DRI
[    22.601] Initializing built-in extension DRI2
[    22.601] (II) LoadModule: "glx"
[    22.620] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    22.731] (II) Module glx: vendor="X.Org Foundation"
[    22.731]     compiled for 1.14.5, module version = 1.0.0
[    22.731]     ABI class: X.Org Server Extension, version 7.0
[    22.731] (==) AIGLX enabled
[    22.731] Loading extension GLX
[    22.731] (==) Matched intel as autoconfigured driver 0
[    22.731] (==) Matched intel as autoconfigured driver 1
[    22.731] (==) Matched vesa as autoconfigured driver 2
[    22.731] (==) Matched modesetting as autoconfigured driver 3
[    22.731] (==) Matched fbdev as autoconfigured driver 4
[    22.731] (==) Assigned the driver to the xf86ConfigLayout
[    22.731] (II) LoadModule: "intel"
[    22.732] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    22.798] (II) Module intel: vendor="X.Org Foundation"
[    22.798]     compiled for 1.14.3, module version = 2.21.15
[    22.798]     Module class: X.Org Video Driver
[    22.798]     ABI class: X.Org Video Driver, version 14.1
[    22.798] (II) LoadModule: "vesa"
[    22.798] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    22.808] (II) Module vesa: vendor="X.Org Foundation"
[    22.808]     compiled for 1.14.3, module version = 2.3.3
[    22.808]     Module class: X.Org Video Driver
[    22.808]     ABI class: X.Org Video Driver, version 14.1
[    22.808] (II) LoadModule: "modesetting"
[    22.808] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    22.828] (II) Module modesetting: vendor="X.Org Foundation"
[    22.828]     compiled for 1.14.3, module version = 0.8.1
[    22.828]     Module class: X.Org Video Driver
[    22.828]     ABI class: X.Org Video Driver, version 14.1
[    22.828] (II) LoadModule: "fbdev"
[    22.828] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    22.879] (II) Module fbdev: vendor="X.Org Foundation"
[    22.879]     compiled for 1.14.3, module version = 0.4.4
[    22.879]     Module class: X.Org Video Driver
[    22.879]     ABI class: X.Org Video Driver, version 14.1
[    22.879] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    22.880] (II) VESA: driver for VESA chipsets: vesa
[    22.880] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    22.880] (II) FBDEV: driver for framebuffer: fbdev
[    22.880] (++) using VT number 7

[    23.048] (WW) Falling back to old probe method for vesa
[    23.048] (WW) Falling back to old probe method for modesetting
[    23.048] (WW) Falling back to old probe method for fbdev
[    23.048] (II) Loading sub module "fbdevhw"
[    23.048] (II) LoadModule: "fbdevhw"
[    23.048] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.073] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.073]     compiled for 1.14.5, module version = 0.0.2
[    23.073]     ABI class: X.Org Video Driver, version 14.1
[    23.073] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    23.073] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.074] (==) intel(0): RGB weight 888
[    23.074] (==) intel(0): Default visual is TrueColor
[    23.074] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2500
[    23.074] (**) intel(0): Relaxed fencing enabled
[    23.074] (**) intel(0): Wait on SwapBuffers? enabled
[    23.074] (**) intel(0): Triple buffering? enabled
[    23.074] (**) intel(0): Framebuffer tiled
[    23.074] (**) intel(0): Pixmaps tiled
[    23.074] (**) intel(0): 3D buffers tiled
[    23.074] (**) intel(0): SwapBuffers wait enabled
[    23.074] (==) intel(0): video overlay key set to 0x101fe
[    23.074] (II) intel(0): Output LVDS1 has no monitor section
[    23.074] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    23.075] (II) intel(0): Output VGA1 has no monitor section
[    23.076] (II) intel(0): Output HDMI1 has no monitor section
[    23.076] (II) intel(0): Output DP1 has no monitor section
[    23.076] (II) intel(0): EDID for output LVDS1
[    23.076] (II) intel(0): Manufacturer: LGD  Model: 33a  Serial#: 0
[    23.076] (II) intel(0): Year: 2011  Week: 0
[    23.076] (II) intel(0): EDID Version: 1.3
[    23.076] (II) intel(0): Digital Display Input
[    23.076] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    23.076] (II) intel(0): Gamma: 2.20
[    23.076] (II) intel(0): No DPMS capabilities specified
[    23.076] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    23.076] (II) intel(0): First detailed timing is preferred mode
[    23.076] (II) intel(0): redX: 0.618 redY: 0.369   greenX: 0.355 greenY: 0.603
[    23.076] (II) intel(0): blueX: 0.151 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
[    23.076] (II) intel(0): Manufacturer's mask: 0
[    23.076] (II) intel(0): Supported detailed timing:
[    23.076] (II) intel(0): clock: 70.0 MHz   Image Size:  344 x 194 mm
[    23.076] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
[    23.076] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
[    23.076] (II) intel(0):  LG Display
[    23.076] (II) intel(0):  LP156WH4-TLN2
[    23.076] (II) intel(0): EDID (in hex):
[    23.076] (II) intel(0):     00ffffffffffff0030e43a0300000000
[    23.076] (II) intel(0):     00150103802213780a61d59e5e5b9a26
[    23.076] (II) intel(0):     1a505400000001010101010101010101
[    23.076] (II) intel(0):     010101010101581b567e50000e302430
[    23.076] (II) intel(0):     350058c2100000190000000000000000
[    23.076] (II) intel(0):     00000000000000000000000000fe004c
[    23.076] (II) intel(0):     4720446973706c61790a2020000000fe
[    23.076] (II) intel(0):     004c503135365748342d544c4e320082
[    23.076] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    23.076] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    23.076] (II) intel(0): Printing probed modes for output LVDS1
[    23.076] (II) intel(0): Modeline "1366x768"x60.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    23.076] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    23.076] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    23.076] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    23.076] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    23.076] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    23.076] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    23.078] (II) intel(0): EDID for output VGA1
[    23.078] (II) intel(0): EDID for output HDMI1
[    23.078] (II) intel(0): EDID for output DP1
[    23.078] (II) intel(0): Output LVDS1 connected
[    23.078] (II) intel(0): Output VGA1 disconnected
[    23.078] (II) intel(0): Output HDMI1 disconnected
[    23.078] (II) intel(0): Output DP1 disconnected
[    23.078] (II) intel(0): Using exact sizes for initial modes
[    23.078] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    23.078] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    23.078] (II) intel(0): Kernel page flipping support detected, enabling
[    23.078] (==) intel(0): DPI set to (96, 96)
[    23.078] (II) Loading sub module "fb"
[    23.078] (II) LoadModule: "fb"
[    23.078] (II) Loading /usr/lib/xorg/modules/libfb.so
[    23.106] (II) Module fb: vendor="X.Org Foundation"
[    23.106]     compiled for 1.14.5, module version = 1.0.0
[    23.106]     ABI class: X.Org ANSI C Emulation, version 0.4
[    23.106] (II) Loading sub module "dri2"
[    23.106] (II) LoadModule: "dri2"
[    23.106] (II) Module "dri2" already built-in
[    23.106] (II) UnloadModule: "vesa"
[    23.106] (II) Unloading vesa
[    23.106] (II) UnloadModule: "modesetting"
[    23.106] (II) Unloading modesetting
[    23.106] (II) UnloadModule: "fbdev"
[    23.106] (II) Unloading fbdev
[    23.106] (II) UnloadSubModule: "fbdevhw"
[    23.106] (II) Unloading fbdevhw
[    23.106] (==) Depth 24 pixmap format is 32 bpp
[    23.119] (II) intel(0): [DRI2] Setup complete
[    23.119] (II) intel(0): [DRI2]   DRI driver: i965
[    23.120] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    23.128] (II) UXA(0): Driver registered support for the following operations:
[    23.128] (II)         solid
[    23.128] (II)         copy
[    23.128] (II)         composite (RENDER acceleration)
[    23.128] (II)         put_image
[    23.128] (II)         get_image
[    23.128] (==) intel(0): Backing store disabled
[    23.128] (==) intel(0): Silken mouse enabled
[    23.128] (II) intel(0): Initializing HW Cursor
[    23.128] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.133] (==) intel(0): DPMS enabled
[    23.133] (==) intel(0): Intel XvMC decoder enabled
[    23.133] (II) intel(0): Set up textured video
[    23.133] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    23.133] (II) intel(0): direct rendering: DRI2 Enabled
[    23.133] (==) intel(0): hotplug detection: "enabled"
[    23.144] (--) RandR disabled
[    23.151] (II) SELinux: Disabled on system
[    23.360] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.361] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.361] (II) AIGLX: enabled GLX_ARB_create_context
[    23.361] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    23.361] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    23.361] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.361] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.361] (II) AIGLX: Loaded and initialized i965
[    23.361] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.362] (II) intel(0): Setting screen physical size to 361 x 203
[    23.934] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    23.934] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.934] (II) LoadModule: "evdev"
[    23.953] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.975] (II) Module evdev: vendor="X.Org Foundation"
[    23.975]     compiled for 1.14.3, module version = 2.8.2
[    23.975]     Module class: X.Org XInput Driver
[    23.975]     ABI class: X.Org XInput driver, version 19.1
[    23.975] (II) Using input driver 'evdev' for 'Power Button'
[    23.975] (**) Power Button: always reports core events
[    23.975] (**) evdev: Power Button: Device: "/dev/input/event4"
[    23.975] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.975] (--) evdev: Power Button: Found keys
[    23.975] (II) evdev: Power Button: Configuring as keyboard
[    23.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[    23.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.975] (**) Option "xkb_rules" "evdev"
[    23.975] (**) Option "xkb_model" "pc105"
[    23.975] (**) Option "xkb_layout" "pl"
[    23.999] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    23.999] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.999] (II) Using input driver 'evdev' for 'Video Bus'
[    23.999] (**) Video Bus: always reports core events
[    23.999] (**) evdev: Video Bus: Device: "/dev/input/event9"
[    23.999] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.999] (--) evdev: Video Bus: Found keys
[    23.999] (II) evdev: Video Bus: Configuring as keyboard
[    23.999] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event9"
[    23.999] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    23.999] (**) Option "xkb_rules" "evdev"
[    23.999] (**) Option "xkb_model" "pc105"
[    23.999] (**) Option "xkb_layout" "pl"
[    24.000] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    24.000] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.000] (II) Using input driver 'evdev' for 'Power Button'
[    24.000] (**) Power Button: always reports core events
[    24.000] (**) evdev: Power Button: Device: "/dev/input/event2"
[    24.000] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.000] (--) evdev: Power Button: Found keys
[    24.000] (II) evdev: Power Button: Configuring as keyboard
[    24.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input3/event2"
[    24.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    24.000] (**) Option "xkb_rules" "evdev"
[    24.000] (**) Option "xkb_model" "pc105"
[    24.000] (**) Option "xkb_layout" "pl"
[    24.000] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    24.000] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.000] (II) Using input driver 'evdev' for 'Video Bus'
[    24.000] (**) Video Bus: always reports core events
[    24.000] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    24.000] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.000] (--) evdev: Video Bus: Found keys
[    24.000] (II) evdev: Video Bus: Configuring as keyboard
[    24.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input10/event8"
[    24.000] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    24.000] (**) Option "xkb_rules" "evdev"
[    24.000] (**) Option "xkb_model" "pc105"
[    24.001] (**) Option "xkb_layout" "pl"
[    24.001] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    24.001] (II) No input driver specified, ignoring this device.
[    24.001] (II) This device may have been added with another device file.
[    24.001] (II) config/udev: Adding drm device (/dev/dri/card0)
[    24.001] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[    24.001] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    24.001] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    24.001] (**) Logitech USB Optical Mouse: always reports core events
[    24.001] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[    24.001] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[    24.001] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[    24.001] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    24.001] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    24.001] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    24.001] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    24.001] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    24.001] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    24.001] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.002] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input2/event1"
[    24.002] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[    24.002] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    24.002] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    24.002] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    24.002] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    24.002] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    24.002] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    24.002] (II) No input driver specified, ignoring this device.
[    24.002] (II) This device may have been added with another device file.
[    24.002] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[    24.002] (II) No input driver specified, ignoring this device.
[    24.002] (II) This device may have been added with another device file.
[    24.003] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[    24.003] (II) No input driver specified, ignoring this device.
[    24.003] (II) This device may have been added with another device file.
[    24.003] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    24.003] (II) No input driver specified, ignoring this device.
[    24.003] (II) This device may have been added with another device file.
[    24.003] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[    24.003] (II) No input driver specified, ignoring this device.
[    24.003] (II) This device may have been added with another device file.
[    24.003] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event7)
[    24.003] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[    24.003] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[    24.003] (**) Lenovo EasyCamera: always reports core events
[    24.003] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event7"
[    24.003] (--) evdev: Lenovo EasyCamera: Vendor 0x4f2 Product 0xb3bd
[    24.003] (--) evdev: Lenovo EasyCamera: Found keys
[    24.003] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[    24.003] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input9/event7"
[    24.003] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[    24.003] (**) Option "xkb_rules" "evdev"
[    24.003] (**) Option "xkb_model" "pc105"
[    24.003] (**) Option "xkb_layout" "pl"
[    24.004] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    24.004] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.004] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.004] (**) AT Translated Set 2 keyboard: always reports core events
[    24.004] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    24.004] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    24.004] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    24.004] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    24.004] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    24.004] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    24.004] (**) Option "xkb_rules" "evdev"
[    24.004] (**) Option "xkb_model" "pc105"
[    24.004] (**) Option "xkb_layout" "pl"
[    24.004] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[    24.004] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    24.004] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    24.004] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    24.004] (II) LoadModule: "synaptics"
[    24.005] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.014] (II) Module synaptics: vendor="X.Org Foundation"
[    24.014]     compiled for 1.14.5, module version = 1.7.3
[    24.014]     Module class: X.Org XInput Driver
[    24.014]     ABI class: X.Org XInput driver, version 19.1
[    24.014] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    24.014] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.014] (**) Option "Device" "/dev/input/event10"
[    24.148] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5728 (res 46)
[    24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902 (res 83)
[    24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.148] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.220] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event10"
[    24.220] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    24.220] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    24.220] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    24.220] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[    24.220] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    24.220] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    24.220] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    24.220] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    24.220] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.220] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    24.220] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    24.221] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[    24.221] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    24.221] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    24.221] (**) Ideapad extra buttons: always reports core events
[    24.221] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event5"
[    24.221] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    24.221] (--) evdev: Ideapad extra buttons: Found keys
[    24.221] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    24.221] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input6/event5"
[    24.221] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 14)
[    24.221] (**) Option "xkb_rules" "evdev"
[    24.221] (**) Option "xkb_model" "pc105"
[    24.221] (**) Option "xkb_layout" "pl"
[    24.221] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    24.221] (II) No input driver specified, ignoring this device.
[    24.221] (II) This device may have been added with another device file.
[    24.222] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[    24.222] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    24.222] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    24.222] (**) ACPI Virtual Keyboard Device: always reports core events
[    24.222] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
[    24.222] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    24.222] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    24.222] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    24.222] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event15"
[    24.222] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15)
[    24.222] (**) Option "xkb_rules" "evdev"
[    24.222] (**) Option "xkb_model" "pc105"
[    24.222] (**) Option "xkb_layout" "pl"
[    48.220] (II) intel(0): EDID vendor "LGD", prod id 826
[    48.220] (II) intel(0): Printing DDC gathered Modelines:
[    48.220] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    48.222] (II) intel(0): EDID vendor "LGD", prod id 826
[    48.222] (II) intel(0): Printing DDC gathered Modelines:
[    48.222] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    48.619] (II) intel(0): EDID vendor "LGD", prod id 826
[    48.619] (II) intel(0): Printing DDC gathered Modelines:
[    48.619] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    50.248] (II) intel(0): EDID vendor "LGD", prod id 826
[    50.248] (II) intel(0): Printing DDC gathered Modelines:
[    50.248] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[  1437.794] (II) intel(0): EDID vendor "LGD", prod id 826
[  1437.795] (II) intel(0): Printing DDC gathered Modelines:
[  1437.795] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[  1437.797] (II) intel(0): EDID vendor "LGD", prod id 826
[  1437.797] (II) intel(0): Printing DDC gathered Modelines:
[  1437.797] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[  1474.633] (II) intel(0): EDID vendor "LGD", prod id 826
[  1474.633] (II) intel(0): Printing DDC gathered Modelines:
[  1474.633] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)

Ostatnio edytowany przez Debusr (2014-02-14 23:11:20)

Offline

#25 2014-02-14 23:14:18

fervi - Użytkownik

fervi: Użytkownik; Zarejestrowany: 2010-03-14

Re: 2 karty graficzne intel ati

Możesz dla Fervi'ego?

lspci | grep VGA

Fervi

Offline

Strony: 1 2 3 … 5 ▶

Stopka forum

[ Generated in 0.010 seconds, 11 queries executed ]

Informacje debugowania

Time (s)	Query
0.00016	SET CHARSET latin2
0.00008	SET NAMES latin2
0.00147	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.226.248.88' WHERE u.id=1
0.00097	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.226.248.88', 1732729176)
0.00053	SELECT * FROM punbb_online WHERE logged<1732728876
0.00046	SELECT topic_id FROM punbb_posts WHERE id=256594
0.00006	SELECT id FROM punbb_posts WHERE topic_id=25242 ORDER BY posted
0.00055	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=25242 AND t.moved_to IS NULL
0.00006	SELECT search_for, replace_with FROM punbb_censoring
0.00106	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=25242 ORDER BY p.id LIMIT 0,25
0.00083	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=25242
Total query time: 0.00623 s