Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#26  2014-02-01 10:21:15

  adi1423 - Użytkownik

adi1423
Użytkownik
Zarejestrowany: 2013-04-20

Re: Laptop się samoczynnie wyłącza

[quote=lis6502]panowie, jednak proponowalbym sie przyjrzec systemowi. Kolega pisze, ze laptop robi
'shutdown -h', nie hardwarowy zanik napiecia. Cos wymusza shutdown, ja okreslibym czasookres po jakim to sie dzieje i szukal... Cronjoba?
Dalszy troubleshooting oparlbym o loga z acpid, a nuz fikusny przycisk wlaczania jest tak wyrobiony, ze nieproszony sie wciska?[/quote]

Kod:

root@localhost:/home/adi1423# cron
cron: can't lock /var/run/crond.pid, otherpid may be 4161: Resource temporarily unavailable

Kod:

root@localhost:/home/adi1423# less /var/log/acpid
/var/log/acpid: Nie ma takiego pliku ani katalogu
root@localhost:/home/adi1423#

Z klawiszem power nie ma takiej mozliwości aby sam się wciskał.

Offline

 

#27  2014-02-01 11:50:54

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Laptop się samoczynnie wyłącza

Pokaż

Kod:

cat /var/log/dmesg

po tym jak się komp wylączy.


[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#28  2014-02-06 19:31:28

  adi1423 - Użytkownik

adi1423
Użytkownik
Zarejestrowany: 2013-04-20

Re: Laptop się samoczynnie wyłącza

[quote=ilin]Pokaż

Kod:

cat /var/log/dmesg

po tym jak się komp wylączy.[/quote]

Kod:

init_memory_mapping: [mem 0x35200000-0x353fdfff]
 [mem 0x35200000-0x353fdfff] page 4k
BRK [0x017bc000, 0x017bcfff] PGTABLE
BRK [0x017bd000, 0x017bdfff] PGTABLE
BRK [0x017be000, 0x017befff] PGTABLE
BRK [0x017bf000, 0x017bffff] PGTABLE
BRK [0x017c0000, 0x017c0fff] PGTABLE
BRK [0x017c1000, 0x017c1fff] PGTABLE
RAMDISK: [mem 0x356cc000-0x36b5dfff]
Allocated new RAMDISK: [mem 0x33f49000-0x353da33d]
Move RAMDISK from [mem 0x356cc000-0x36b5d33d] to [mem 0x33f49000-0x353da33d]
ACPI: RSDP 000f7190 00024 (v02 PTLTD )
ACPI: XSDT 7bbf44df 00064 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
ACPI: FACP 7bbe4000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 7bbe5000 0A4E7 (v02 Intel  CANTIGA  06040000 MSFT 03000000)
ACPI: FACS 7bb9efc0 00040
ACPI: HPET 7bbfed86 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 7bbfedbe 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: SLIC 7bbfedfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
ACPI: APIC 7bbfef70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: BOOT 7bbfefd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SSDT 7bbf457b 001BC (v01 BrtRef  DD01BRT 00001000 INTL 20050624)
ACPI: SSDT 7bbe3000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1128MB HIGHMEM available.
851MB LOWMEM available.
  mapped low ram: 0 - 353fe000
  low ram: 0 - 353fe000
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  Normal   [mem 0x01000000-0x353fdfff]
  HighMem  [mem 0x353fe000-0x7bbfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0x7b6a0fff]
  node   0: [mem 0x7b6a7000-0x7b7bbfff]
  node   0: [mem 0x7b80f000-0x7b907fff]
  node   0: [mem 0x7bb0f000-0x7bb17fff]
  node   0: [mem 0x7bb1f000-0x7bb63fff]
  node   0: [mem 0x7bb9f000-0x7bbe1fff]
  node   0: [mem 0x7bbff000-0x7bbfffff]
On node 0 totalpages: 506077
free_area_init_node: node 0, pgdat c1676380, node_mem_map f2fd0020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  Normal zone: 1672 pages used for memmap
  Normal zone: 214014 pages, LIFO batch:31
  HighMem zone: 2257 pages used for memmap
  HighMem zone: 288067 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f2fa8000 s35840 r0 d21504 u57344
pcpu-alloc: s35840 r0 d21504 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 504373
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-9.dmz.1-liquorix-686 root=UUID=9ba7b8cc-2f37-4133-826f-b28c0226e7e3 ro quiet splash
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000353fe:0007bc00)
Memory: 1978296K/2024308K available (4262K kernel code, 449K rwdata, 1948K rodata, 632K init, 540K bss, 46012K reserved, 1152268K highmem)
virtual kernel memory layout:
    fixmap  : 0xfd7b5000 - 0xfffff000   (41256 kB)
    pkmap   : 0xfd400000 - 0xfd600000   (2048 kB)
    vmalloc : 0xf5bfe000 - 0xfd3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf53fe000   ( 851 MB)
      .init : 0xc1683000 - 0xc1721000   ( 632 kB)
      .data : 0xc1429cc3 - 0xc1682780   (2402 kB)
      .text : 0xc1000000 - 0xc1429cc3   (4263 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
    Dump stacks of tasks blocking RCU-preempt GP.
    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
NR_IRQS:33024 nr_irqs:512 16
CPU 0 irqstacks, hard=f280a000 soft=f280c000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2161.242 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.48 BogoMIPS (lpj=2161242)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys blkio
Initializing cgroup subsys bfqio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 16K (c1721000 - c1725000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  T3400  @ 2.16GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f28a8000 soft=f28aa000
smpboot: Booting Node   0, Processors  #   1 OK
Initializing CPU#1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (8644.96 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7bb64000-0x7bb9efff] (241664 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 7bb1ac20 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 7bb18620 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 7bb19ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 7bb19f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf8000000-0xf83fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf8400000-0xf84fffff 64bit]
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0x1820-0x183f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0x1840-0x185f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0x1860-0x187f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf8904000-0xf89043ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf8900000-0xf8903fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x1880-0x189f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x18a0-0x18bf]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x18c0-0x18df]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf8904400-0xf89047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0x18f8-0x18ff]
pci 0000:00:1f.2: reg 0x14: [io  0x180c-0x180f]
pci 0000:00:1f.2: reg 0x18: [io  0x18f0-0x18f7]
pci 0000:00:1f.2: reg 0x1c: [io  0x1808-0x180b]
pci 0000:00:1f.2: reg 0x20: [io  0x18e0-0x18ef]
pci 0000:00:1f.2: reg 0x24: [io  0x1810-0x181f]
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0x1c50-0x1c57]
pci 0000:00:1f.5: reg 0x14: [io  0x1c44-0x1c47]
pci 0000:00:1f.5: reg 0x18: [io  0x1c48-0x1c4f]
pci 0000:00:1f.5: reg 0x1c: [io  0x1c40-0x1c43]
pci 0000:00:1f.5: reg 0x20: [io  0x1c30-0x1c3f]
pci 0000:00:1f.5: reg 0x24: [io  0x1c20-0x1c2f]
pci 0000:02:00.0: [11ab:436b] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf8500000-0xf8503fff 64bit]
pci 0000:02:00.0: reg 0x18: [io  0x2000-0x20ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff]
pci 0000:03:00.0: [8086:4229] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf8600000-0xf8601fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf86fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05-07]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7b6a1000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b7bc000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b908000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bb18000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bb64000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bbe2000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bc00000-0x7bffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io  0x1200-0x120f] has been reserved
system 00:06: [io  0x0480-0x048f] has been reserved
system 00:06: [io  0xffff] has been reserved
system 00:06: [io  0xffff] has been reserved
system 00:06: [io  0x0400-0x047f] could not be reserved
system 00:06: [io  0x1180-0x11ff] has been reserved
system 00:06: [io  0xfe00] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x802fffff pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x80500000-0x806fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x80700000-0x808fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0x80900000-0x809000ff 64bit]
pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff]
pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x802fffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf86fffff]
pci 0000:00:1c.1:   bridge window [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.2:   bridge window [mem 0x80500000-0x806fffff]
pci 0000:00:1c.2:   bridge window [mem 0x80700000-0x808fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-07]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf8500000-0xf85fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x802fffff pref]
pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xf8600000-0xf86fffff]
pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0x80500000-0x806fffff]
pci_bus 0000:04: resource 2 [mem 0x80700000-0x808fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 11 [mem 0x80000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21064K (f3f49000 - f53db000)
Simple Boot Flag at 0x57 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1391708594.860:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1654
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
intel_idle: does not run on family 6 model 15
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
xenfs: not registering filesystem on non-xen platform
libphy: Fixed MDIO Bus: probed
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
platform eisa.0: Probing EISA bus 0
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: vegas registered
TCP: yeah registered
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 632K (c1683000 - c1721000)
CFS CPU scheduler.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udevd[600]: starting version 175
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
Linux agpgart interface v0.103
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
ehci-pci: EHCI PCI platform driver
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
[drm] Initialized drm 1.1.0 20060810
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.7: debug port 1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 20, io mem 0xf8904000
sky2: driver version 1.30
sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
sky2 0000:02:00.0: irq 45 for MSI/MSI-X
sky2 0000:02:00.0 eth0: addr 00:1d:72:ef:13:95
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.7
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 6 ports detected
wmi: Mapper loaded
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (65 C)
SCSI subsystem initialized
libata version 3.00 loaded.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (65 C)
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8904400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.7
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 6 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
 P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19
ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19
ata_piix 0000:00:1f.5: MAP [
 P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19
ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 46 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 5-3: new high-speed USB device number 2 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 5-3: New USB device found, idVendor=064e, idProduct=a103
usb 5-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 5-3: Product: Acer Crystal Eye webcam
usb 5-3: Manufacturer: SuYin
usb 5-3: SerialNumber: CN0314-SN30-OV03-VA-R02.03.02
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: ATAPI: Optiarc DVD RW AD-7590S, 1.B0, max UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590S  1.B0 PQ: 0 ANSI: 5
usb 5-5: new high-speed USB device number 3 using ehci-pci
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:02: registered as cooling_device2
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 5-5: New USB device found, idVendor=0bda, idProduct=0158
usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-5: Product: USB2.0-CRW
usb 5-5: Manufacturer: Generic
usb 5-5: SerialNumber: 20071114173400000
 sda: sda1 < sda5 sda6 > sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usb-storage
ums-realtek 5-5:1.0: USB Mass Storage device detected
scsi4 : usb-storage 5-5:1.0
usbcore: registered new interface driver ums-realtek
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
PM: Starting manual resume from disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
udevd[962]: starting version 175
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Device: 0x0
acer_wmi: Brightness must be controlled by acpi video driver
input: Acer BMA150 accelerometer as /devices/virtual/input/input7
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
input: PC Speaker as /devices/platform/pcspkr/input/input8
ACPI Warning: 0x00001c00-0x00001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
cfg80211: Calling CRDA to update world regulatory domain
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
media: Linux media interface: v0.10
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwl4965 0000:03:00.0: irq 47 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Linux video capture interface: v2.00
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb5/5-3/5-3:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.7: setting latency timer to 64
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.2: setting latency timer to 64
Adding 4045820k swap on /dev/sda6.  Priority:-1 extents:1 across:4045820k FS
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
loop: module loaded
NET: Registered protocol family 10
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

Offline

 

#29  2014-02-06 20:40:28

  lis6502 - Łowca lamerów

lis6502
Łowca lamerów
Skąd: Stalinogród
Zarejestrowany: 2008-12-04

Re: Laptop się samoczynnie wyłącza

Hmm, no i mamy dmesga po starcie... Przydałoby się zobaczyć tego sprzed wyłączenia. Syslog na debianie zapisuje starego to dmesg.old?

Offline

 

#30  2014-02-08 19:50:32

  adi1423 - Użytkownik

adi1423
Użytkownik
Zarejestrowany: 2013-04-20

Re: Laptop się samoczynnie wyłącza

[quote=lis6502]Hmm, no i mamy dmesga po starcie... Przydałoby się zobaczyć tego sprzed wyłączenia. Syslog na debianie zapisuje starego to dmesg.old?[/quote]

Kod:

cat /var/log/dmesg.old
cat: /var/log/dmesg.old: Nie ma takiego pliku ani katalogu

Offline

 

#31  2014-02-08 20:13:05

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Laptop się samoczynnie wyłącza

Sprawdź czy masz plik /var/log/dmesg.0

Offline

 

#32  2014-02-10 14:56:53

  adi1423 - Użytkownik

adi1423
Użytkownik
Zarejestrowany: 2013-04-20

Re: Laptop się samoczynnie wyłącza

[quote=yossarian]Sprawdź czy masz plik /var/log/dmesg.0[/quote]

Kod:

initial memory mapped: [mem 0x00000000-0x01dfffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x35000000-0x351fffff]
 [mem 0x35000000-0x351fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x34ffffff]
 [mem 0x34000000-0x34ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x35200000-0x353fdfff]
 [mem 0x35200000-0x353fdfff] page 4k
BRK [0x017bc000, 0x017bcfff] PGTABLE
BRK [0x017bd000, 0x017bdfff] PGTABLE
BRK [0x017be000, 0x017befff] PGTABLE
BRK [0x017bf000, 0x017bffff] PGTABLE
BRK [0x017c0000, 0x017c0fff] PGTABLE
BRK [0x017c1000, 0x017c1fff] PGTABLE
RAMDISK: [mem 0x356cc000-0x36b5dfff]
Allocated new RAMDISK: [mem 0x33f49000-0x353da33d]
Move RAMDISK from [mem 0x356cc000-0x36b5d33d] to [mem 0x33f49000-0x353da33d]
ACPI: RSDP 000f7190 00024 (v02 PTLTD )
ACPI: XSDT 7bbf44df 00064 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
ACPI: FACP 7bbe4000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 7bbe5000 0A4E7 (v02 Intel  CANTIGA  06040000 MSFT 03000000)
ACPI: FACS 7bb9efc0 00040
ACPI: HPET 7bbfed86 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 7bbfedbe 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: SLIC 7bbfedfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
ACPI: APIC 7bbfef70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: BOOT 7bbfefd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SSDT 7bbf457b 001BC (v01 BrtRef  DD01BRT 00001000 INTL 20050624)
ACPI: SSDT 7bbe3000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1128MB HIGHMEM available.
851MB LOWMEM available.
  mapped low ram: 0 - 353fe000
  low ram: 0 - 353fe000
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  Normal   [mem 0x01000000-0x353fdfff]
  HighMem  [mem 0x353fe000-0x7bbfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0x7b6a0fff]
  node   0: [mem 0x7b6a7000-0x7b7bbfff]
  node   0: [mem 0x7b80f000-0x7b907fff]
  node   0: [mem 0x7bb0f000-0x7bb17fff]
  node   0: [mem 0x7bb1f000-0x7bb63fff]
  node   0: [mem 0x7bb9f000-0x7bbe1fff]
  node   0: [mem 0x7bbff000-0x7bbfffff]
On node 0 totalpages: 506077
free_area_init_node: node 0, pgdat c1676380, node_mem_map f2fd0020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  Normal zone: 1672 pages used for memmap
  Normal zone: 214014 pages, LIFO batch:31
  HighMem zone: 2257 pages used for memmap
  HighMem zone: 288067 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f2fa8000 s35840 r0 d21504 u57344
pcpu-alloc: s35840 r0 d21504 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 504373
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-9.dmz.1-liquorix-686 root=UUID=9ba7b8cc-2f37-4133-826f-b28c0226e7e3 ro quiet splash
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000353fe:0007bc00)
Memory: 1978296K/2024308K available (4262K kernel code, 449K rwdata, 1948K rodata, 632K init, 540K bss, 46012K reserved, 1152268K highmem)
virtual kernel memory layout:
    fixmap  : 0xfd7b5000 - 0xfffff000   (41256 kB)
    pkmap   : 0xfd400000 - 0xfd600000   (2048 kB)
    vmalloc : 0xf5bfe000 - 0xfd3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf53fe000   ( 851 MB)
      .init : 0xc1683000 - 0xc1721000   ( 632 kB)
      .data : 0xc1429cc3 - 0xc1682780   (2402 kB)
      .text : 0xc1000000 - 0xc1429cc3   (4263 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
    Dump stacks of tasks blocking RCU-preempt GP.
    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
NR_IRQS:33024 nr_irqs:512 16
CPU 0 irqstacks, hard=f280a000 soft=f280c000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2161.377 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.75 BogoMIPS (lpj=2161377)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys blkio
Initializing cgroup subsys bfqio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 16K (c1721000 - c1725000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  T3400  @ 2.16GHz (fam: 06, model: 0f, stepping: 0d)
APIC calibration not consistent with PM-Timer: 328ms instead of 100ms
APIC delta adjusted to PM-Timer: 1039060 (3418470)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f28a8000 soft=f28aa000
smpboot: Booting Node   0, Processors  #   1 OK
Initializing CPU#1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (8645.50 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7bb64000-0x7bb9efff] (241664 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 7bb1ac20 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 7bb18620 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 7bb19ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 7bb19f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf8000000-0xf83fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf8400000-0xf84fffff 64bit]
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0x1820-0x183f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0x1840-0x185f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0x1860-0x187f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf8904000-0xf89043ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf8900000-0xf8903fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x1880-0x189f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x18a0-0x18bf]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x18c0-0x18df]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf8904400-0xf89047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0x18f8-0x18ff]
pci 0000:00:1f.2: reg 0x14: [io  0x180c-0x180f]
pci 0000:00:1f.2: reg 0x18: [io  0x18f0-0x18f7]
pci 0000:00:1f.2: reg 0x1c: [io  0x1808-0x180b]
pci 0000:00:1f.2: reg 0x20: [io  0x18e0-0x18ef]
pci 0000:00:1f.2: reg 0x24: [io  0x1810-0x181f]
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0x1c50-0x1c57]
pci 0000:00:1f.5: reg 0x14: [io  0x1c44-0x1c47]
pci 0000:00:1f.5: reg 0x18: [io  0x1c48-0x1c4f]
pci 0000:00:1f.5: reg 0x1c: [io  0x1c40-0x1c43]
pci 0000:00:1f.5: reg 0x20: [io  0x1c30-0x1c3f]
pci 0000:00:1f.5: reg 0x24: [io  0x1c20-0x1c2f]
pci 0000:02:00.0: [11ab:436b] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf8500000-0xf8503fff 64bit]
pci 0000:02:00.0: reg 0x18: [io  0x2000-0x20ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff]
pci 0000:03:00.0: [8086:4229] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf8600000-0xf8601fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf86fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05-07]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7b6a1000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b7bc000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b908000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bb18000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bb64000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bbe2000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bc00000-0x7bffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io  0x1200-0x120f] has been reserved
system 00:06: [io  0x0480-0x048f] has been reserved
system 00:06: [io  0xffff] has been reserved
system 00:06: [io  0xffff] has been reserved
system 00:06: [io  0x0400-0x047f] could not be reserved
system 00:06: [io  0x1180-0x11ff] has been reserved
system 00:06: [io  0xfe00] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x802fffff pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x80500000-0x806fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x80700000-0x808fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0x80900000-0x809000ff 64bit]
pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff]
pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x802fffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf86fffff]
pci 0000:00:1c.1:   bridge window [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.2:   bridge window [mem 0x80500000-0x806fffff]
pci 0000:00:1c.2:   bridge window [mem 0x80700000-0x808fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-07]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf8500000-0xf85fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x802fffff pref]
pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xf8600000-0xf86fffff]
pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0x80500000-0x806fffff]
pci_bus 0000:04: resource 2 [mem 0x80700000-0x808fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 11 [mem 0x80000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21064K (f3f49000 - f53db000)
Simple Boot Flag at 0x57 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1392043411.631:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1654
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
intel_idle: does not run on family 6 model 15
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
xenfs: not registering filesystem on non-xen platform
libphy: Fixed MDIO Bus: probed
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
platform eisa.0: Probing EISA bus 0
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: vegas registered
TCP: yeah registered
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 632K (c1683000 - c1721000)
CFS CPU scheduler.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udevd[601]: starting version 175
Linux agpgart interface v0.103
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[drm] Initialized drm 1.1.0 20060810
ehci-pci: EHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 20, io mem 0xf8904000
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8904400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.12-9.dmz.1-liquorix-686 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sky2: driver version 1.30
sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
sky2 0000:02:00.0: irq 45 for MSI/MSI-X
sky2 0000:02:00.0 eth0: addr 00:1d:72:ef:13:95
wmi: Mapper loaded
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 46 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
SCSI subsystem initialized
libata version 3.00 loaded.
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (66 C)
fbcon: inteldrmfb (fb0) is primary device
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (65 C)
usb 1-3: new high-speed USB device number 2 using ehci-pci
usb 1-3: New USB device found, idVendor=064e, idProduct=a103
usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-3: Product: Acer Crystal Eye webcam
usb 1-3: Manufacturer: SuYin
usb 1-3: SerialNumber: CN0314-SN30-OV03-VA-R02.03.02
usb 1-5: new high-speed USB device number 3 using ehci-pci
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:02: registered as cooling_device2
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
 P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19
ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19
ata_piix 0000:00:1f.5: MAP [
 P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19
ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19
usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB2.0-CRW
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 20071114173400000
usbcore: registered new interface driver usb-storage
ums-realtek 1-5:1.0: USB Mass Storage device detected
scsi4 : usb-storage 1-5:1.0
usbcore: registered new interface driver ums-realtek
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: ATAPI: Optiarc DVD RW AD-7590S, 1.B0, max UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590S  1.B0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 < sda5 sda6 > sda3
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
PM: Starting manual resume from disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
udevd[974]: starting version 175
input: PC Speaker as /devices/platform/pcspkr/input/input6
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
ACPI Warning: 0x00001c00-0x00001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Device: 0x0
acer_wmi: Brightness must be controlled by acpi video driver
input: Acer BMA150 accelerometer as /devices/virtual/input/input11
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.2: setting latency timer to 64
cfg80211: Calling CRDA to update world regulatory domain
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwl4965 0000:03:00.0: irq 48 for MSI/MSI-X
iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
Adding 4045820k swap on /dev/sda6.  Priority:-1 extents:1 across:4045820k FS
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
loop: module loaded
NET: Registered protocol family 10
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

Offline

 

#33  2014-02-19 20:24:25

  adi1423 - Użytkownik

adi1423
Użytkownik
Zarejestrowany: 2013-04-20

Re: Laptop się samoczynnie wyłącza

Jak widać jest

Offline

 

#34  2014-02-22 17:16:09

  adi1423 - Użytkownik

adi1423
Użytkownik
Zarejestrowany: 2013-04-20

Re: Laptop się samoczynnie wyłącza

Przegrzewanie wykluczam bo lapek nie jest aż tak "gorący", a nie miałoby od czego się grzać, mam openbox i ustawione skalowanie procka

Offline

 

#35  2014-02-22 21:47:44

  rychu - elektryk dyżurny

rychu
elektryk dyżurny
Skąd: gdańsk
Zarejestrowany: 2004-12-28

Re: Laptop się samoczynnie wyłącza

[quote=adi1423]Przegrzewanie wykluczam bo lapek nie jest aż tak "gorący"[/quote]
na jakiej podstawie? bo obudowa nie parzy w paluchy? ;) niektóre współczesne procesory nie muszą być wcale obciążone, żeby się przegrzewać

upewnij się, czy wyłączanie kompa wywoływane jest sprzętowo, czy programowo. ściągnij jakieś ubuntu albo doinstaluj na jakiejś partycji inny system i obserwuj, czy komp też się będzie wyłączać


linux regd. user #248790

Offline

 

#36  2014-03-09 18:23:46

  figa - Użytkownik

figa
Użytkownik
Skąd: Nowy Sącz
Zarejestrowany: 2008-09-13

Re: Laptop się samoczynnie wyłącza

Witam
Mam problem podobny z laptopem Aus Eee PC 1201N  .
Byłam z nim już w serwisie ale go nie naprawili. Nie wiedzą co mu jest. Wymienione zostało gniazdko zasilania.
Laptop wyłącza się kiedy chce bez żadnego ostrzeżenia bez względu na to czy chodzi na samej baterii, samym zasilaniu czy na zasilaniu z włożoną baterią.
Baterie kupiliśmy nową i pisze że jest naładowania w 100 %.

Kod:

marek@marek:~/Pulpit$ cat /proc/acpi/battery/BAT0/info
present:                 yes
design capacity:         4400 mAh
last full capacity:      4497 mAh
battery technology:      rechargeable
design voltage:          10800 mV
design capacity warning: 450 mAh
design capacity low:     225 mAh
cycle count:          0
capacity granularity 1:  44 mAh
capacity granularity 2:  44 mAh
model number:            1201N
serial number:            
battery type:            LION
OEM info:                ASUS
marek@marek:~/Pulpit$

Teraz z niego piszę i już ponad 2 godziny pracuje i się nie wyłączył.
Włączyłam test pamięci i miałam coś na czerwono w teście takie
http://screenshooter.net/9270308/lrvnubu
W tej chwili wyciągnęłam jedną pamięć , sprawdziłam testem i przeszło bez błędów.
Na razie laptop się nie wyłączył.
Czy jest możliwe aby wyłączał się samoczynnie byle kiedy z powodu błędów w pamięci albo jakiegoś uszkodzenia gniazda pamięci choć nikt do niego wcześniej nie zaglądał.
Laptop nie nagrzewa się chyba bo jest chłodny a terminal pokazuje to

Kod:

marek@marek:~/Pulpit$ acpitz-virtual-0
acpitz-virtual-0: nie znaleziono polecenia
marek@marek:~/Pulpit$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:       +60.0°C  (crit = +93.0°C)                  

marek@marek:~/Pulpit$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:       +60.0°C  (crit = +93.0°C)                  

marek@marek:~/Pulpit$

Co jeszcze można sprawdzić ?

Offline

 

#37  2014-03-09 18:34:34

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Laptop się samoczynnie wyłącza

Jest wysoce prawdopodobnym ,że zawirowania w pamięci może powodować restarty,wyłączania komputera.


[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#38  2014-03-09 18:53:34

  figa - Użytkownik

figa
Użytkownik
Skąd: Nowy Sącz
Zarejestrowany: 2008-09-13

Re: Laptop się samoczynnie wyłącza

Witaj :)
Zostawię go do jutra na chodzie i zobaczę czy się wyłączy czy nie,  bo może któraś z tych pamięci to powoduje jak piszesz.
Są w nim 2 pamięci po 1 GB.


PS
No i cóż na dwoje babka wróżyła. W nocy się wyłączył choć w zasadzie z ustawień nie powinien, ale dzisiaj od rana chodzi i się nie wyłączył.
Zobaczymy jak się sam zepsuł to może i sam się naprawi :)

Ostatnio edytowany przez figa (2014-03-10 19:59:51)

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.024 seconds, 16 queries executed ]

Informacje debugowania

Time (s) Query
0.00011 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00175 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.135.200.211' WHERE u.id=1
0.00100 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.135.200.211', 1714703004)
0.00048 SELECT * FROM punbb_online WHERE logged<1714702704
0.00211 DELETE FROM punbb_online WHERE ident='18.118.193.232'
0.00059 DELETE FROM punbb_online WHERE ident='3.17.150.89'
0.00063 DELETE FROM punbb_online WHERE ident='47.128.126.153'
0.00069 DELETE FROM punbb_online WHERE ident='47.128.16.222'
0.00062 DELETE FROM punbb_online WHERE ident='47.128.44.214'
0.00084 SELECT topic_id FROM punbb_posts WHERE id=259664
0.00487 SELECT id FROM punbb_posts WHERE topic_id=25117 ORDER BY posted
0.00098 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=25117 AND t.moved_to IS NULL
0.00006 SELECT search_for, replace_with FROM punbb_censoring
0.00419 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=25117 ORDER BY p.id LIMIT 25,25
0.00095 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=25117
Total query time: 0.01991 s