Forum Debian Users Gang

Arristo · 2014-03-22 21:33:35

W systemie utworzył mi się plik "zombi" [b] /var/lib/dpkg/lock [/b]i spowalnia mi start systemu. Wyskakuje mi komunikat

Kod:

Specified filename /var/lib/dpkg/lock is not a mountpoint

i system się "zastanawia" co z tym fantem zrobić. Próbowałem go wykasować ale jest wciąż odtwarzany. Jest to plik pusty od samego początku. Szukając odpowiedzi w internecie próbowałem

Kod:

 apt-get install -f

i

Kod:

dpkg --configure -a

ale nic to nie daje - pasożyt nadal egzystuje.Powstał on przy nieudanej instalacji paczki pobranej z internetu [b]google-chrome-stable_current_i386.deb
[/b]

Proszę o pomoc :)

Ostatnio edytowany przez Arristo (2014-03-22 21:38:50)

ArnVaker · 2014-03-22 21:41:32

Obecność pliku /var/lib/dpkg/lock jest całkowicie normalna. Komunikat mówi, że nie jest on punktem montowania; istotnie – nie jest, ale też nie powinien być.

Arristo · 2014-03-22 21:56:44

Jaką więc rolę on spełnia w systemie i czemu spowalnia jego start?

Nie spotkałem się dotychczas z takim plikiem, a Debiana używam od niedawna.

Ostatnio edytowany przez Arristo (2014-03-22 21:58:09)

menel · 2014-03-22 22:14:54

Kod:

root@shodan:/var/lib/dpkg# ls
alternatives   cmethopt        info   statoverride      status-old
available      diversions      lock   statoverride-old  triggers
available-old  diversions-old  parts  status            updates
root@shodan:/var/lib/dpkg# cat lock
root@shodan:/var/lib/dpkg#

ArnVaker · 2014-03-22 22:17:43

[quote=Arristo]Jaką więc rolę on spełnia w systemie[/quote]
Zapobiega jednoczesnemu wywołaniu więcej niż jednej instancji dpkg.
[quote=Arristo]i czemu spowalnia jego start?[/quote]
To raczej nie wina pliku, a czegoś co się odwołuje do niego jako punktu montowania.

[b]EDIT:[/b] Może ma to związek z tym bugiem: [bug]740275[/bug].

Arristo · 2014-03-23 09:17:51

Kod:

# ls /var/lib/dpkg/
alternatives  available-old  diversions      info  parts         statoverride-old  status-old  updates
available     cmethopt       diversions-old  lock  statoverride  status            triggers

Kod:

root@Lap200314:/home/wojtek# cat /var/lib/dpkg/lock 
root@Lap200314:/home/wojtek#

ten plik jest pusty, a ja używam Debiana jessie.

[quote=ArnVaker]To raczej nie wina pliku, a czegoś co się odwołuje do niego jako punktu montowania.

[b]EDIT:[/b] Może ma to związek z tym bugiem: [bug]740275[/bug].[/quote]
Przeczytałem tego "buga" ;) ale nie bardzo wiem jakie to ma odniesienie do mojej sytuacji. Mam wrażenie, że to dotyczy innego problemu, chociaż podobnego.

Skąd się wziął u mnie ten "nie punkt" ;) montowania i jak się go pozbyć?

ilin · 2014-03-23 09:47:21

Zobacz do /var/log/dmesg może coś będzie tam w tym temacie.

Arristo · 2014-03-23 10:08:32

[quote=ilin]Zobacz do /var/log/dmesg może coś będzie tam w tym temacie.[/quote]

Kod:

~$ ls /var/log/|grep dmesg
dmesg
dmesg.0
dmesg.1.gz
dmesg.2.gz
dmesg.3.gz
dmesg.4.gz

A tutaj się trochę zagubiłem:

Kod:

# cat /var/log/dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.5-1 (2014-03-04)
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f575fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f576000-0x000000003f5befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f5bf000-0x000000003f66cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f66d000-0x000000003f6befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f6bf000-0x000000003f6edfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f6ee000-0x000000003f6fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f6ff000-0x000000003f6fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f700000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: eMachines  eM250           /eM250           , BIOS V1.25 11/28/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f700 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFF00000 mask 0FFF00000 write-protect
[    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
[    0.000000]   2 base 000000000 mask 0E0000000 write-back
[    0.000000]   3 base 020000000 mask 0E0000000 write-back
[    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   5 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000]  [mem 0x37600000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
[    0.000000]  [mem 0x34000000-0x375fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000]  [mem 0x37800000-0x379fdfff] page 4k
[    0.000000] BRK [0x016e4000, 0x016e4fff] PGTABLE
[    0.000000] BRK [0x016e5000, 0x016e6fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36646000-0x3731afff]
[    0.000000] ACPI: RSDP 000fe020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 3f6fe120 000064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 3f6fc000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 3f6f0000 00710E (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 3f688000 000040
[    0.000000] ACPI: SSDT 3f6fd000 0004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: HPET 3f6fb000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 3f6fa000 000068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 3f6f9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASF! 3f6f8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 3f6ef000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 3f6ee000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 125MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] BRK [0x016e7000, 0x016e7fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x379fdfff]
[    0.000000]   HighMem  [mem 0x379fe000-0x3f6fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3f575fff]
[    0.000000]   node   0: [mem 0x3f5bf000-0x3f66cfff]
[    0.000000]   node   0: [mem 0x3f6bf000-0x3f6edfff]
[    0.000000]   node   0: [mem 0x3f6ff000-0x3f6fffff]
[    0.000000] On node 0 totalpages: 259570
[    0.000000] free_area_init_node: node 0, pgdat c15ab880, node_mem_map f5e56020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 251 pages used for memmap
[    0.000000]   HighMem zone: 31830 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79db000 s35520 r0 d21824 u57344
[    0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257790
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13-1-686-pae root=/dev/mapper/Lap200314--vg-root ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003f700)
[    0.000000] Memory: 1008936K/1038280K available (4188K kernel code, 379K rwdata, 1280K rodata, 532K init, 588K bss, 29344K reserved, 127320K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd35000 - 0xfffff000   (2856 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc15b8000 - 0xc163d000   ( 532 kB)
[    0.000000]       .data : 0xc14174ca - 0xc15b7e80   (1666 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14174ca   (4189 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1596.140 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.28 BogoMIPS (lpj=6384560)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004085] Security Framework initialized
[    0.004095] AppArmor: AppArmor disabled by boot time parameter
[    0.004099] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004133] Mount-cache hash table entries: 512
[    0.004555] Initializing cgroup subsys memory
[    0.004570] Initializing cgroup subsys devices
[    0.004576] Initializing cgroup subsys freezer
[    0.004581] Initializing cgroup subsys blkio
[    0.004586] Initializing cgroup subsys perf_event
[    0.004632] Disabled fast string operations
[    0.004641] CPU: Physical Processor ID: 0
[    0.004645] CPU: Processor Core ID: 0
[    0.004651] mce: CPU supports 5 MCE banks
[    0.004664] CPU0: Thermal monitoring enabled (TM2)
[    0.004690] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.004690] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.004690] tlb_flushall_shift: 6
[    0.004852] Freeing SMP alternatives memory: 20K (c163d000 - c1642000)
[    0.009089] ACPI: Core revision 20131115
[    0.018217] ACPI: All ACPI Tables successfully acquired
[    0.020164] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063532] smpboot: CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
[    0.064000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[    0.064000] ... version:                3
[    0.064000] ... bit width:              40
[    0.064000] ... generic registers:      2
[    0.064000] ... value mask:             000000ffffffffff
[    0.064000] ... max period:             000000007fffffff
[    0.064000] ... fixed-purpose events:   3
[    0.064000] ... event mask:             0000000700000003
[    0.064000] CPU 1 irqstacks, hard=f74ca000 soft=f74cc000
[    0.064000] x86: Booting SMP configuration:
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.064000] .... node  #0, CPUs:      #1
[    0.074124] x86: Booted up 1 node, 2 CPUs
[    0.074136] smpboot: Total of 2 processors activated (6384.56 BogoMIPS)
[    0.074396] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.075026] devtmpfs: initialized
[    0.075026] PM: Registering ACPI NVS region [mem 0x3f66d000-0x3f6befff] (335872 bytes)
[    0.075026] NET: Registered protocol family 16
[    0.075026] cpuidle: using governor ladder
[    0.075026] cpuidle: using governor menu
[    0.075026] ACPI: bus type PCI registered
[    0.075026] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.075026] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.075026] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.075026] PCI: Using MMCONFIG for extended config space
[    0.075026] PCI: Using configuration type 1 for base access
[    0.076347] bio: create slab <bio-0> at 0
[    0.076347] ACPI: Added _OSI(Module Device)
[    0.076347] ACPI: Added _OSI(Processor Device)
[    0.076347] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.076347] ACPI: Added _OSI(Processor Aggregator Device)
[    0.085255] ACPI: Executed 1 blocks of module-level executable AML code
[    0.088879] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.089853] ACPI: SSDT 3f5b7c90 000239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.090621] ACPI: Dynamic OEM Table Load:
[    0.090628] ACPI: SSDT   (null) 000239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.090841] ACPI: SSDT 3f5b6e10 0001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.091559] ACPI: Dynamic OEM Table Load:
[    0.091565] ACPI: SSDT   (null) 0001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.112526] ACPI: SSDT 3f5b7f10 0000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.113269] ACPI: Dynamic OEM Table Load:
[    0.113276] ACPI: SSDT   (null) 0000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.113464] ACPI: SSDT 3f5b5f10 000083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.114189] ACPI: Dynamic OEM Table Load:
[    0.114195] ACPI: SSDT   (null) 000083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.136728] ACPI: Interpreter enabled
[    0.136748] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.136760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.136796] ACPI: (supports S0 S3 S4 S5)
[    0.136801] ACPI: Using IOAPIC for interrupt routing
[    0.136874] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.137240] ACPI: No dock devices found.
[    0.365413] ACPI: Power Resource [FN00] (on)
[    0.367074] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.367093] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.367242] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[    0.367257] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f744e698), AE_ALREADY_EXISTS (20131115/psparse-536)
[    0.367273] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.367289] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[    0.369272] PCI host bridge to bus 0000:00
[    0.369283] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.369290] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.369296] pci_bus 0000:00: root bus resource [io  0x0d00-0xefff]
[    0.369303] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.369309] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.369333] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
[    0.369559] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
[    0.369581] pci 0000:00:02.0: reg 0x10: [mem 0x58280000-0x582fffff]
[    0.369593] pci 0000:00:02.0: reg 0x14: [io  0x60f0-0x60f7]
[    0.369605] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[    0.369616] pci 0000:00:02.0: reg 0x1c: [mem 0x58300000-0x5833ffff]
[    0.369824] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.369842] pci 0000:00:02.1: reg 0x10: [mem 0x58200000-0x5827ffff]
[    0.370121] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.370153] pci 0000:00:1b.0: reg 0x10: [mem 0x58340000-0x58343fff 64bit]
[    0.370272] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.370405] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.370501] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.370628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.370754] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.370853] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.370969] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.371096] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.371193] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.371318] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.371445] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.371543] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.371660] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.371786] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.371881] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.371949] pci 0000:00:1d.0: reg 0x20: [io  0x60a0-0x60bf]
[    0.372153] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.372249] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.372316] pci 0000:00:1d.1: reg 0x20: [io  0x6080-0x609f]
[    0.372505] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.372598] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.372666] pci 0000:00:1d.2: reg 0x20: [io  0x6060-0x607f]
[    0.372854] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.372946] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.373014] pci 0000:00:1d.3: reg 0x20: [io  0x6040-0x605f]
[    0.373201] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.373310] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.373343] pci 0000:00:1d.7: reg 0x10: [mem 0x58344400-0x583447ff]
[    0.373464] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.373665] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.373767] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.374036] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.374170] pci 0000:00:1f.0: address space collision: [io  0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
[    0.374182] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.374192] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.374201] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[    0.374437] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.374470] pci 0000:00:1f.2: reg 0x10: [io  0x60d8-0x60df]
[    0.374488] pci 0000:00:1f.2: reg 0x14: [io  0x60fc-0x60ff]
[    0.374505] pci 0000:00:1f.2: reg 0x18: [io  0x60d0-0x60d7]
[    0.374523] pci 0000:00:1f.2: reg 0x1c: [io  0x60f8-0x60fb]
[    0.374540] pci 0000:00:1f.2: reg 0x20: [io  0x6020-0x602f]
[    0.374557] pci 0000:00:1f.2: reg 0x24: [mem 0x58344000-0x583443ff]
[    0.374626] pci 0000:00:1f.2: PME# supported from D3hot
[    0.374825] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.374909] pci 0000:00:1f.3: reg 0x20: [io  0x6000-0x601f]
[    0.375326] acpiphp: Slot [1] registered
[    0.375436] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000
[    0.375477] pci 0000:01:00.0: reg 0x10: [mem 0x57100000-0x5710ffff 64bit]
[    0.375640] pci 0000:01:00.0: supports D1
[    0.375647] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[    0.380036] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.380047] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.380057] pci 0000:00:1c.0:   bridge window [mem 0x57100000-0x581fffff]
[    0.380070] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.380226] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.380236] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.380246] pci 0000:00:1c.1:   bridge window [mem 0x56100000-0x570fffff]
[    0.380259] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.380436] pci 0000:03:00.0: [1969:1062] type 00 class 0x020000
[    0.380478] pci 0000:03:00.0: reg 0x10: [mem 0x55000000-0x5503ffff 64bit]
[    0.380500] pci 0000:03:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.380660] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.388032] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.388044] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.388054] pci 0000:00:1c.2:   bridge window [mem 0x55000000-0x560fffff]
[    0.388067] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.388186] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.388196] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.388205] pci 0000:00:1c.3:   bridge window [mem 0x54000000-0x54ffffff]
[    0.388218] pci 0000:00:1c.3:   bridge window [mem 0x53000000-0x53ffffff 64bit pref]
[    0.388363] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.388383] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.388389] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xefff] (subtractive decode)
[    0.388396] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.388402] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.388452] pci_bus 0000:00: on NUMA node 0
[    0.460265] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.460455] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.460639] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.460822] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.461005] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.461189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.461373] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.461557] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.463065] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.463088] ACPI: \_SB_.PCI0: notify handler is installed
[    0.463206] Found 1 acpi root devices
[    0.463324] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.463525] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.463525] vgaarb: loaded
[    0.463525] vgaarb: bridge control possible 0000:00:02.0
[    0.463525] PCI: Using ACPI for IRQ routing
[    0.475094] PCI: pci_cache_line_size set to 64 bytes
[    0.475189] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.475195] e820: reserve RAM buffer [mem 0x3f576000-0x3fffffff]
[    0.475201] e820: reserve RAM buffer [mem 0x3f66d000-0x3fffffff]
[    0.475206] e820: reserve RAM buffer [mem 0x3f6ee000-0x3fffffff]
[    0.475211] e820: reserve RAM buffer [mem 0x3f700000-0x3fffffff]
[    0.475515] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.475526] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.475536] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.477054] Switched to clocksource hpet
[    0.480499] pnp: PnP ACPI init
[    0.480542] ACPI: bus type PNP registered
[    0.552433] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
[    0.552566] system 00:00: [io  0x0200-0x020f] has been reserved
[    0.552575] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.552582] system 00:00: [io  0x0610] has been reserved
[    0.552589] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.552596] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.552604] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.552611] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.552620] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.552627] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.552634] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.552642] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.552649] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.552656] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.552663] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.552673] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.552707] pnp 00:01: [dma 4]
[    0.552763] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.552883] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.553128] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.553220] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.553300] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[    0.553437] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.553652] pnp 00:07: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.554016] pnp: PnP ACPI: found 8 devices
[    0.554021] ACPI: bus type PNP unregistered
[    0.554028] PnPBIOS: Disabled by ACPI PNP
[    0.594905] pci 0000:00:1f.0: BAR 13: [io  0x0400-0x047f] has bogus alignment
[    0.594917] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.594927] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.594939] pci 0000:00:1c.0:   bridge window [mem 0x57100000-0x581fffff]
[    0.594949] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.594963] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.594971] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.594981] pci 0000:00:1c.1:   bridge window [mem 0x56100000-0x570fffff]
[    0.594991] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.595004] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.595011] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.595022] pci 0000:00:1c.2:   bridge window [mem 0x55000000-0x560fffff]
[    0.595031] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.595044] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.595052] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.595062] pci 0000:00:1c.3:   bridge window [mem 0x54000000-0x54ffffff]
[    0.595072] pci 0000:00:1c.3:   bridge window [mem 0x53000000-0x53ffffff 64bit pref]
[    0.595084] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.595106] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.595112] pci_bus 0000:00: resource 5 [io  0x0d00-0xefff]
[    0.595119] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.595125] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.595132] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.595138] pci_bus 0000:01: resource 1 [mem 0x57100000-0x581fffff]
[    0.595145] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.595152] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.595158] pci_bus 0000:02: resource 1 [mem 0x56100000-0x570fffff]
[    0.595164] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.595172] pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
[    0.595178] pci_bus 0000:03: resource 1 [mem 0x55000000-0x560fffff]
[    0.595185] pci_bus 0000:03: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[    0.595191] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.595198] pci_bus 0000:04: resource 1 [mem 0x54000000-0x54ffffff]
[    0.595204] pci_bus 0000:04: resource 2 [mem 0x53000000-0x53ffffff 64bit pref]
[    0.595211] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.595217] pci_bus 0000:05: resource 5 [io  0x0d00-0xefff]
[    0.595224] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.595230] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
[    0.595347] NET: Registered protocol family 2
[    0.595753] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.595797] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.595856] TCP: Hash tables configured (established 8192 bind 8192)
[    0.595948] TCP: reno registered
[    0.595957] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.595975] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.596169] NET: Registered protocol family 1
[    0.596206] pci 0000:00:02.0: Boot video device
[    0.598386] PCI: CLS 0 bytes, default 64
[    0.598517] Unpacking initramfs...
[    1.256348] Freeing initrd memory: 13140K (f6646000 - f731b000)
[    1.256464] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    1.256471] Simple Boot Flag at 0x44 set to 0x1
[    1.256782] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
[    1.256802] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[    1.256964] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.257584] audit: initializing netlink socket (disabled)
[    1.257613] type=2000 audit(1395560659.256:1): initialized
[    1.287319] bounce pool size: 64 pages
[    1.287332] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.287906] VFS: Disk quotas dquot_6.5.2
[    1.287968] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.288240] msgmni has been set to 1747
[    1.289077] alg: No test for stdrng (krng)
[    1.289159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.289249] io scheduler noop registered
[    1.289256] io scheduler deadline registered
[    1.289290] io scheduler cfq registered (default)
[    1.289752] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.289884] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    1.290110] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.290442] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.290564] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[    1.290790] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.290988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.291039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.291142] intel_idle: MWAIT substates: 0x20220
[    1.291159] intel_idle: v0.4 model 0x1C
[    1.291164] intel_idle: lapic_timer_reliable_states 0x2
[    1.291169] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.291338] GHES: HEST is not enabled!
[    1.291367] isapnp: Scanning for PnP cards...
[    1.645365] isapnp: No Plug & Play device found
[    1.645544] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.646688] Linux agpgart interface v0.103
[    1.646877] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.647032] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.647189] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.647445] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    1.647754] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.667822] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.667839] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.668233] mousedev: PS/2 mouse device common for all mice
[    1.669230] rtc_cmos 00:02: RTC can wake from S4
[    1.669492] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.669543] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.669834] TCP: cubic registered
[    1.669962] NET: Registered protocol family 10
[    1.670407] mip6: Mobile IPv6
[    1.670414] NET: Registered protocol family 17
[    1.670424] mpls_gso: MPLS GSO support
[    1.670759] Using IPI No-Shortcut mode
[    1.671069] registered taskstats version 1
[    1.672050] rtc_cmos 00:02: setting system clock to 2014-03-23 07:44:20 UTC (1395560660)
[    1.672169] PM: Hibernation image not present or could not be loaded.
[    1.672665] Freeing unused kernel memory: 532K (c15b8000 - c163d000)
[    1.672727] Write protecting the kernel text: 4192k
[    1.672805] Write protecting the kernel read-only data: 1284k
[    1.672811] NX-protecting the kernel data: 4000k
[    1.691868] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.702855] systemd-udevd[56]: starting version 204
[    1.854336] ACPI: Fan [FAN] (on)
[    1.877990] thermal LNXTHERM:00: registered as thermal_zone0
[    1.878000] ACPI: Thermal Zone [THRM] (27 C)
[    1.883940] ACPI: bus type USB registered
[    1.888148] usbcore: registered new interface driver usbfs
[    1.888205] usbcore: registered new interface driver hub
[    1.892504] SCSI subsystem initialized
[    1.892527] usbcore: registered new device driver usb
[    1.893868] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.894579] ehci-pci: EHCI PCI platform driver
[    1.894847] uhci_hcd: USB Universal Host Controller Interface driver
[    1.895033] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.895054] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.895084] ehci-pci 0000:00:1d.7: debug port 1
[    1.899035] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.899887] ehci-pci 0000:00:1d.7: irq 16, io mem 0x58344400
[    1.900939] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[    1.908081] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.908288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.908299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.908308] usb usb1: Product: EHCI Host Controller
[    1.908316] usb usb1: Manufacturer: Linux 3.13-1-686-pae ehci_hcd
[    1.908323] usb usb1: SerialNumber: 0000:00:1d.7
[    1.908861] hub 1-0:1.0: USB hub found
[    1.908905] hub 1-0:1.0: 8 ports detected
[    1.910606] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.910636] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.910700] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000060a0
[    1.910915] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.910926] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.910933] usb usb2: Product: UHCI Host Controller
[    1.910940] usb usb2: Manufacturer: Linux 3.13-1-686-pae uhci_hcd
[    1.910947] usb usb2: SerialNumber: 0000:00:1d.0
[    1.911389] hub 2-0:1.0: USB hub found
[    1.911421] hub 2-0:1.0: 2 ports detected
[    1.912178] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.912204] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.912305] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006080
[    1.912515] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.912526] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.912534] usb usb3: Product: UHCI Host Controller
[    1.912541] usb usb3: Manufacturer: Linux 3.13-1-686-pae uhci_hcd
[    1.912549] usb usb3: SerialNumber: 0000:00:1d.1
[    1.913258] hub 3-0:1.0: USB hub found
[    1.913292] hub 3-0:1.0: 2 ports detected
[    1.913965] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.913987] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.914085] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
[    1.914294] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.914306] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.914316] usb usb4: Product: UHCI Host Controller
[    1.914323] usb usb4: Manufacturer: Linux 3.13-1-686-pae uhci_hcd
[    1.914330] usb usb4: SerialNumber: 0000:00:1d.2
[    1.914450] libata version 3.00 loaded.
[    1.915907] hub 4-0:1.0: USB hub found
[    1.915954] hub 4-0:1.0: 2 ports detected
[    1.917724] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.917755] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.917868] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006040
[    1.919109] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.919121] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.919130] usb usb5: Product: UHCI Host Controller
[    1.919137] usb usb5: Manufacturer: Linux 3.13-1-686-pae uhci_hcd
[    1.919145] usb usb5: SerialNumber: 0000:00:1d.3
[    1.921250] hub 5-0:1.0: USB hub found
[    1.921287] hub 5-0:1.0: 2 ports detected
[    1.922441] ahci 0000:00:1f.2: version 3.0
[    1.924434] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.924655] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.924721] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    1.924734] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part 
[    1.940918] scsi0 : ahci
[    1.948269] scsi1 : ahci
[    1.956416] scsi2 : ahci
[    1.958723] scsi3 : ahci
[    1.958942] ata1: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344100 irq 44
[    1.958951] ata2: DUMMY
[    1.958961] ata3: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344200 irq 44
[    1.958968] ata4: DUMMY
[    2.276146] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.276164] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    2.277424] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.277876] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
[    2.277891] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.279500] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.279948] ata1.00: configured for UDMA/133
[    2.280347] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[    2.440113] usb 1-2: New USB device found, idVendor=0c45, idProduct=62c0
[    2.440131] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.440143] usb 1-2: Product: WebCam
[    2.440154] usb 1-2: Manufacturer: Sonix Technology Co., Ltd.
[    2.600120] ata3: SATA link down (SStatus 0 SControl 300)
[    2.616879] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.617147] sd 0:0:0:0: [sda] Write Protect is off
[    2.617156] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.617254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.650438]  sda: sda1 sda2 < sda5 >
[    2.651622] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.655897] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.888201] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    2.926418] device-mapper: uevent: version 1.0.3
[    2.926628] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.938114] random: lvm urandom read with 34 bits of entropy available
[    2.971804] bio: create slab <bio-1> at 1
[    3.058168] usb 2-1: New USB device found, idVendor=1bcf, idProduct=053a
[    3.058181] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.058190] usb 2-1: Product: 2.4GHz 2way RF Receiver
[    3.073896] hidraw: raw HID events driver (C) Jiri Kosina
[    3.107739] usbcore: registered new interface driver usbhid
[    3.107747] usbhid: USB HID core driver
[    3.115352] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[    3.115819] hid-generic 0003:1BCF:053A.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1d.0-1/input0
[    3.315817] PM: Starting manual resume from disk
[    3.315827] PM: Hibernation image partition 254:1 present
[    3.315831] PM: Looking for hibernation image.
[    3.316145] PM: Image not found (code -22)
[    3.316151] PM: Hibernation image not present or could not be loaded.
[    3.351370] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.374093] random: nonblocking pool is initialized
[    4.479058] systemd-udevd[336]: starting version 204
[    5.037341] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    5.037354] ACPI: Power Button [PWRB]
[    5.037541] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[    5.037622] ACPI: Lid Switch [LID0]
[    5.037806] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[    5.037819] ACPI: Sleep Button [SLPB]
[    5.038040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.038050] ACPI: Power Button [PWRF]
[    5.083916] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[    5.180179] ACPI: AC Adapter [AC] (on-line)
[    5.210709] [drm] Initialized drm 1.1.0 20060810
[    5.297933] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    5.331683] intel_rng: FWH not detected
[    5.400306] acpi device:28: registered as cooling_device3
[    5.400613] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    5.407580] wmi: Mapper loaded
[    5.462065] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    5.549544] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
[    5.549566] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.549576] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    5.549589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.549595] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    5.549607] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.549613] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.662765] media: Linux media interface: v0.10
[    5.677355] Linux video capture interface: v2.00
[    5.800409] cfg80211: Calling CRDA to update world regulatory domain
[    5.805733] leds_ss4200: no LED devices found
[    5.868854] [drm] Memory usable by graphics device = 256M
[    5.869378] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.869383] [drm] Driver supports precise vblank timestamp query.
[    5.869532] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.928311] ACPI: Battery Slot [BAT0] (battery present)
[    5.957750] [drm] initialized overlay support
[    5.979601] fbcon: inteldrmfb (fb0) is primary device
[    6.022676] iTCO_vendor_support: vendor-support=0
[    6.030841] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    6.030918] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[    6.031844] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.039167] acer_wmi: Acer Laptop ACPI-WMI Extras
[    6.080969] uvcvideo: Found UVC 1.00 device WebCam (0c45:62c0)
[    6.098158] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input10
[    6.098352] usbcore: registered new interface driver uvcvideo
[    6.098353] USB Video Class driver (1.1.1)
[    6.185819] ath: phy0: Enable LNA combining
[    6.188966] ath: phy0: ASPM enabled: 0x42
[    6.188970] ath: EEPROM regdomain: 0x65
[    6.188972] ath: EEPROM indicates we should expect a direct regpair map
[    6.188976] ath: Country alpha2 being used: 00
[    6.188977] ath: Regpair used: 0x65
[    6.216229] acer_wmi: Function bitmap for Communication Device: 0x1
[    6.216243] acer_wmi: Brightness must be controlled by acpi video driver
[    6.216779] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[    6.224358] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.225118] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8720000, irq=16
[    6.681616] Console: switching to colour frame buffer device 128x37
[    6.690911] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.690920] i915 0000:00:02.0: registered panic notifier
[    6.690971] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.691516] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    6.761260] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[    6.766433] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    6.766717] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    6.849637] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000, board id: 3655, fw id: 511380
[    6.931538] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[    8.287732] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    8.567085] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    8.982608] Adding 2072572k swap on /dev/mapper/Lap200314--vg-swap_1.  Priority:-1 extents:1 across:2072572k 
[   10.121607] lp: driver loaded but no devices found
[   10.139769] ppdev: user-space parallel port driver
[   10.202718] fuse init (API version 7.22)
[   10.278112] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   10.282761] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   10.338564] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   10.357241] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   10.402871] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   10.442819] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   12.588889] RPC: Registered named UNIX socket transport module.
[   12.588899] RPC: Registered udp transport module.
[   12.588905] RPC: Registered tcp transport module.
[   12.588910] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.624159] FS-Cache: Loaded
[   12.665705] FS-Cache: Netfs 'nfs' registered for caching
[   12.738664] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   15.852070] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[   19.643711] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.679315] atl1c 0000:03:00.0: irq 46 for MSI/MSI-X
[   19.694143] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.037820] wlan0: authenticate with 00:19:70:ab:b2:33
[   22.063001] wlan0: send auth to 00:19:70:ab:b2:33 (try 1/3)
[   22.066324] wlan0: authenticated
[   22.072117] wlan0: associate with 00:19:70:ab:b2:33 (try 1/3)
[   22.076128] wlan0: RX AssocResp from 00:19:70:ab:b2:33 (capab=0x431 status=0 aid=2)
[   22.076250] wlan0: associated
[   22.076426] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   22.152120] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:19:70:ab:b2:33
[   48.927915] Bluetooth: Core ver 2.17
[   48.928058] NET: Registered protocol family 31
[   48.928065] Bluetooth: HCI device and connection manager initialized
[   48.929207] Bluetooth: HCI socket layer initialized
[   48.929223] Bluetooth: L2CAP socket layer initialized
[   48.929251] Bluetooth: SCO socket layer initialized
[   48.954220] Bluetooth: RFCOMM TTY layer initialized
[   48.954251] Bluetooth: RFCOMM socket layer initialized
[   48.954270] Bluetooth: RFCOMM ver 1.11
[   49.033004] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   49.033014] Bluetooth: BNEP filters: protocol multicast
[   49.033043] Bluetooth: BNEP socket layer initialized

ilin · 2014-03-23 10:13:01

Nic tam niepokojącego nie zauważyłem.

Polecenie

Kod:

mount -a

nie zwraca żadnego błędu ?

Arristo · 2014-03-23 10:19:20

Nie zwraca żadnego błędu:

Kod:

# mount -a
#

Ostatnio edytowany przez Arristo (2014-03-23 10:26:05)

ilin · 2014-03-23 10:40:59

Zobacz też do pliku
[i]/var/log/messages[/i]

lis6502 · 2014-03-23 11:08:42

[url=https://wiki.debian.org/bootlogd]luk hir[/url]. W Gentoo mam OpenRC i mam możliwość zapisywania /var/log/rc.log, w którym to zapisywane są wszystkie wydarzenia związane z bootowaniem i błędy tegoż; dzięki temu troubleshootnąłem literówkę w fstabie przez którą jądro montowało mi / jako ro xD

Kod:

rc sysinit logging started at Tue Mar 18 19:42:23 2014


   OpenRC 0.12.4 is starting up Gentoo Linux (x86_64)

 * /proc is already mounted
 * Mounting /run ...
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Caching service dependencies ...
 [ ok ]
 * Using /dev mounted from kernel ...
 [ ok ]
 * Mounting /dev/mqueue ...
 [ ok ]
 * Mounting /dev/shm ...
 [ ok ]
 * Mounting config filesystem ...
 [ ok ]
 * Mounting cgroup filesystem ...
 [ ok ]
 * Mounting fuse control filesystem ...
 [ ok ]
 * setting up tmpfiles.d entries for /dev ...
 [ ok ]
 * Starting udev ...
 [ ok ]
 * Generating a rule to create a /dev/root symlink ...
 [ ok ]
 * Populating /dev with existing devices through uevents ...
 [ ok ]
 * Waiting for uevents to be processed ...
 [ ok ]

rc sysinit logging stopped at Tue 
 19:42:23 2014


rc boot logging started at Tue Mar 18 19:42:23 2014

 * Setting system clock using the hardware clock [UTC] ...
 [ ok ]
 * Autoloaded 0 module(s)
 * Checking local filesystems  ...
/dev/sda1: clean, 295122/8593408 files, 1335904/34373120 blocks
 [ ok ]
 * Remounting root filesystem read/write ...
mount: / not mounted or bad option
       In some cases useful info is found in syslog - try
       dmesg | tail or so
 * Root filesystem could not be mounted read/write
 [ !! ]
 * Remounting filesystems ...
 [ ok ]
 * Updating /etc/mtab ...
 * /etc/mtab is not updateable
 [ !! ]
 * Activating swap devices ...
 [ ok ]
 * Mounting local filesystems ...
 [ ok ]
 * Configuring kernel parameters ...
 [ ok ]
mkdir: cannot create directory ‘/var/lib/misc’: Read-only file system
 * failed to create needed directory /var/lib/misc
 [ !! ]
 * ERROR: bootmisc failed to start
 * Setting hostname to Nexus ...
 [ ok ]
 * Setting terminal encoding [UTF-8] ...
 [ ok ]
 * Setting keyboard mode [UTF-8] ...
 [ ok ]
 * Loading key mappings [us] ...
 [ ok ]
 * Bringing up network interface lo ...
 [ ok ]
 * Activating additional swap space ...
 [ ok ]
 * setting up tmpfiles.d entries ...
 [ ok ]

rc boot logging stopped at Tue Mar 18 19:42:24 2014


rc default logging started at Tue Mar 18 19:42:24 2014

mkdir: cannot create directory ‘/var/lib/misc’: Read-only file system
 * failed to create needed directory /var/lib/misc
 [ !! ]
 * ERROR: bootmisc failed to start
 * Checking your configfile (/etc/syslog-ng/syslog-ng.conf) ...
 [ ok ]
 * /var/lib/syslog-ng: correcting mode
 * checkpath: chmod: Read-only file system
 * ERROR: syslog-ng failed to start
 * Starting cronie ...
 [ ok ]
 * Bringing up interface eth0
 *   Caching network module dependencies
need firewalld
 *   ERROR: interface eth0 does not exist
 *   Ensure that you have loaded the correct kernel module for your hardware
 * ERROR: net.eth0 failed to start
 * ERROR: cannot start netmount as net.eth0 would not start
ssh-keygen: generating new host keys: RSA1 open /etc/ssh/ssh_host_key failed: Read-only file system.
Saving the key failed: /etc/ssh/ssh_host_key.
ssh-keygen: generating new host keys: RSA open /etc/ssh/ssh_host_rsa_key failed: Read-only file system.
Saving the key failed: /etc/ssh/ssh_host_rsa_key.
ssh-keygen: generating new host keys: DSA open /etc/ssh/ssh_host_dsa_key failed: Read-only file system.
Saving the key failed: /etc/ssh/ssh_host_dsa_key.
Could not load host key: /etc/ssh/ssh_host_rsa_key
Could not load host key: /etc/ssh/ssh_host_dsa_key
Disabling protocol version 2. Could not load host key
sshd: no hostkeys available -- exiting.
 * ERROR: sshd failed to start
 * Starting local
 [ ok ]

rc default logging stopped at Tue Mar 18 19:42:26 2014


rc shutdown logging started at Wed Mar 19 14:49:39 2014

 * Caching service dependencies ...
 [ ok ]
 * Stopping local
 [ ok ]
 * Saving random seed ...
 * Failed to save random seed
 [ !! ]
 * ERROR: urandom failed to stop
 * Deactivating additional swap space ...
 [ ok ]
 * Stopping sshd ...
 [ ok ]
 * Stopping cronie ...
 [ ok ]
 * Stopping syslog-ng ...
 [ ok ]
 * Unmounting loop devices
 * Unmounting filesystems
 * Deactivating swap devices ...
 [ ok ]
 * Stopping udev ...
 [ ok ]
 * Setting hardware clock using the system clock [UTC] ...
 [ ok ]

rc shutdown logging stopped at Wed Mar 19 14:49:42 2014

Jak widać (lub nie) logowane jest działanie usług skategoryzowane na runlevele.

Arristo · 2014-03-23 13:08:46

W [b]fstabie[/b] nic nie dłubałem, więc literówki być nie może. To jest jakaś inna przyczyna.

Mój [b]fstab [/b] wygląda tak:

Kod:

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/mapper/Lap200314--vg-root /               ext4    errors=remount-ro 0       1
# /boot was on /dev/sda1 during installation
UUID=1611b681-e0d4-4733-8a3c-d2820ea35799 /boot           ext2    defaults        0       2
/dev/mapper/Lap200314--vg-home /home           ext4    defaults        0       2
/dev/mapper/Lap200314--vg-tmp /tmp            ext4    defaults        0       2
/dev/mapper/Lap200314--vg-usr /usr            ext4    defaults        0       2
/dev/mapper/Lap200314--vg-var /var            ext4    defaults        0       2
/dev/mapper/Lap200314--vg-swap_1 none            swap    sw              0       0
/dev/sdb1       /media/usb0     auto    rw,user,noauto  0       0

Ostatnio edytowany przez Arristo (2014-03-23 13:19:01)

Arristo · 2014-03-23 15:31:04

[quote=ilin]Zobacz też do pliku
[i]/var/log/messages[/i][/quote]
To jego treść:

Kod:

# cat messages
Mar 23 10:56:54 Lap200314 kernel: [ 7957.657101] perf samples too long (10003 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
Mar 23 10:59:08 Lap200314 kernel: [ 8091.149947] wlan0: deauthenticating from 00:19:70:ab:b2:33 by local choice (reason=3)
Mar 23 10:59:08 Lap200314 kernel: [ 8091.162842] cfg80211: Calling CRDA for country: NA
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300400] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13-1-686-pae #1 Debian 3.13.5-1
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300405] Hardware name: eMachines  eM250           /eM250           , BIOS V1.25 11/28/2009
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300410]  00000012 c140b038 f75ef980 c1093c01 c14da8d8 00000012 00000000 c159d420
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300425]  f75ef980 00000012 c1093fea c159d44c 92b8068c 00000469 00000000 f75ef980
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300438]  00000000 f75ef9d4 00000012 c10921d1 fe7ffbef b7fffebb c55330ca 17efc875
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300450] Call Trace:
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300465]  [<c140b038>] ? dump_stack+0x3e/0x4e
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300474]  [<c1093c01>] ? __report_bad_irq+0x21/0xc0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300482]  [<c1093fea>] ? note_interrupt+0x15a/0x1a0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300492]  [<c10921d1>] ? handle_irq_event_percpu+0xc1/0x1a0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300500]  [<c10922d2>] ? handle_irq_event+0x22/0x40
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300507]  [<c1094860>] ? unmask_irq+0x20/0x20
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300514]  [<c10948a3>] ? handle_fasteoi_irq+0x43/0xd0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300518]  <IRQ>  [<c10104e1>] ? do_IRQ+0x31/0xa0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300533]  [<c1416773>] ? common_interrupt+0x33/0x38
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300541]  [<c109007b>] ? vprintk_emit+0xdb/0x560
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300549]  [<c131e7d6>] ? cpuidle_enter_state+0x36/0xd0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300557]  [<c131e8fc>] ? cpuidle_idle_call+0x8c/0x1b0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300565]  [<c1016385>] ? arch_cpu_idle+0x5/0x20
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300573]  [<c10919a9>] ? cpu_startup_entry+0x1b9/0x200
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300581]  [<c15b8aa2>] ? start_kernel+0x3ad/0x3b2
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300589]  [<c15b8541>] ? repair_env_string+0x4d/0x4d
Mar 23 11:42:01 Lap200314 kernel: [ 8098.048778] PM: Syncing filesystems ... done.
Mar 23 11:42:01 Lap200314 kernel: [ 8098.235704] Freezing user space processes ... (elapsed 0.058 seconds) done.
Mar 23 11:42:01 Lap200314 kernel: [ 8098.293935] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar 23 11:42:01 Lap200314 kernel: [ 8098.295522] Suspending console(s) (use no_console_suspend to debug)
Mar 23 11:42:01 Lap200314 kernel: [ 8098.296132] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 23 11:42:01 Lap200314 kernel: [ 8098.323892] sd 0:0:0:0: [sda] Stopping disk
Mar 23 11:42:01 Lap200314 kernel: [ 8098.904221] PM: suspend of devices complete after 608.389 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8098.904575] PM: late suspend of devices complete after 0.341 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8098.904831] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.936246] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952121] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952204] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952285] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952366] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952633] PM: noirq suspend of devices complete after 48.051 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952681] ACPI: Preparing to enter system sleep state S3
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952824] PM: Saving platform NVS memory
Mar 23 11:42:01 Lap200314 kernel: [ 8098.954162] Disabling non-boot CPUs ...
Mar 23 11:42:01 Lap200314 kernel: [ 8099.032070] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20131115/evregion-282)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.032085] ACPI Error: Method parse/execution failed [\_SB_.PCI0.WMID.WGDS] (Node f7456248), AE_BAD_PARAMETER (20131115/psparse-536)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.032099] ACPI Error: Method parse/execution failed [\_SB_.PCI0.WMID.WMBA] (Node f7456b18), AE_BAD_PARAMETER (20131115/psparse-536)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056030] smpboot: CPU 1 is now offline
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] ACPI: Low-level resume complete
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S0_] (20131115/hwxface-580)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] PM: Restoring platform NVS memory
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] Enabling non-boot CPUs ...
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] x86: Booting SMP configuration:
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar 23 11:42:01 Lap200314 kernel: [ 8098.955713] Initializing CPU#1
Mar 23 11:42:01 Lap200314 kernel: [ 8098.955713] Disabled fast string operations
Mar 23 11:42:01 Lap200314 kernel: [ 8099.069107] CPU1 is up
Mar 23 11:42:01 Lap200314 kernel: [ 8099.069733] ACPI: Waking up from system sleep state S3
Mar 23 11:42:01 Lap200314 kernel: [ 8099.100505] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.100592] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.100677] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.100762] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.116125] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.164311] PM: noirq resume of devices complete after 94.374 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8099.164519] PM: early resume of devices complete after 0.170 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8099.168935] usb usb2: root hub lost power or was reset
Mar 23 11:42:01 Lap200314 kernel: [ 8099.169270] usb usb3: root hub lost power or was reset
Mar 23 11:42:01 Lap200314 kernel: [ 8099.169623] usb usb4: root hub lost power or was reset
Mar 23 11:42:01 Lap200314 kernel: [ 8099.169957] usb usb5: root hub lost power or was reset
Mar 23 11:42:01 Lap200314 kernel: [ 8099.171408] ath: phy0: ASPM enabled: 0x42
Mar 23 11:42:01 Lap200314 kernel: [ 8099.171443] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.408092] usb 1-2: reset high-speed USB device number 3 using ehci-pci
Mar 23 11:42:01 Lap200314 kernel: [ 8099.504117] ata3: SATA link down (SStatus 0 SControl 300)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.800201] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Mar 23 11:42:01 Lap200314 kernel: [ 8100.572075] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 23 11:42:01 Lap200314 kernel: [ 8100.573349] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 23 11:42:01 Lap200314 kernel: [ 8100.579432] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Mar 23 11:42:01 Lap200314 kernel: [ 8100.579986] ata1.00: configured for UDMA/133
Mar 23 11:42:01 Lap200314 kernel: [ 8100.596302] sd 0:0:0:0: [sda] Starting disk
Mar 23 11:42:01 Lap200314 kernel: [ 8100.692360] PM: resume of devices complete after 1527.825 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8100.692783] Restarting tasks ... done.
Mar 23 11:42:01 Lap200314 kernel: [ 8100.706382] video LNXVIDEO:00: Restoring backlight state
Mar 23 11:42:03 Lap200314 kernel: [ 8102.800600] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar 23 11:42:04 Lap200314 kernel: [ 8103.093125] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 11:42:06 Lap200314 kernel: [ 8105.214577] wlan0: authenticate with 00:19:70:ab:b2:33
Mar 23 11:42:06 Lap200314 kernel: [ 8105.237368] wlan0: send auth to 00:19:70:ab:b2:33 (try 1/3)
Mar 23 11:42:06 Lap200314 kernel: [ 8105.240449] wlan0: authenticated
Mar 23 11:42:06 Lap200314 kernel: [ 8105.244380] wlan0: associate with 00:19:70:ab:b2:33 (try 1/3)
Mar 23 11:42:06 Lap200314 kernel: [ 8105.247982] wlan0: RX AssocResp from 00:19:70:ab:b2:33 (capab=0x431 status=0 aid=2)
Mar 23 11:42:06 Lap200314 kernel: [ 8105.248135] wlan0: associated
Mar 23 11:42:06 Lap200314 kernel: [ 8105.248164] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 23 11:42:06 Lap200314 kernel: [ 8105.338658] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:19:70:ab:b2:33
Mar 23 11:46:43 Lap200314 kernel: [ 8382.223398] wlan0: deauthenticating from 00:19:70:ab:b2:33 by local choice (reason=3)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.243122] cfg80211: Calling CRDA to update world regulatory domain
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314082] cfg80211: World regulatory domain updated:
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314095] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314103] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314110] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314117] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314124] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314130] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314137] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.320152] cfg80211: Calling CRDA to update world regulatory domain
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640058] cfg80211: World regulatory domain updated:
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640069] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640078] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640085] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640092] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640100] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640107] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640114] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 23 12:51:55 Lap200314 kernel: [ 8384.294626] PM: Syncing filesystems ... done.
Mar 23 12:51:55 Lap200314 kernel: [ 8384.420581] Freezing user space processes ... (elapsed 0.002 seconds) done.
Mar 23 12:51:55 Lap200314 kernel: [ 8384.423038] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar 23 12:51:55 Lap200314 kernel: [ 8384.424406] Suspending console(s) (use no_console_suspend to debug)
Mar 23 12:51:55 Lap200314 kernel: [ 8384.424991] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 23 12:51:55 Lap200314 kernel: [ 8384.425177] sd 0:0:0:0: [sda] Stopping disk
Mar 23 12:51:55 Lap200314 kernel: [ 8384.984202] PM: suspend of devices complete after 559.497 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8384.984559] PM: late suspend of devices complete after 0.344 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8384.984816] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.016253] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032138] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032268] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032364] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032446] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032722] PM: noirq suspend of devices complete after 48.155 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032767] ACPI: Preparing to enter system sleep state S3
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032910] PM: Saving platform NVS memory
Mar 23 12:51:55 Lap200314 kernel: [ 8385.034231] Disabling non-boot CPUs ...
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136033] smpboot: CPU 1 is now offline
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] ACPI: Low-level resume complete
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S0_] (20131115/hwxface-580)
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] PM: Restoring platform NVS memory
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] Enabling non-boot CPUs ...
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] x86: Booting SMP configuration:
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar 23 12:51:55 Lap200314 kernel: [ 8385.035779] Initializing CPU#1
Mar 23 12:51:55 Lap200314 kernel: [ 8385.035779] Disabled fast string operations
Mar 23 12:51:55 Lap200314 kernel: [ 8385.149174] CPU1 is up
Mar 23 12:51:55 Lap200314 kernel: [ 8385.149789] ACPI: Waking up from system sleep state S3
Mar 23 12:51:55 Lap200314 kernel: [ 8385.180482] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.180569] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.180654] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.180739] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.196125] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.244310] PM: noirq resume of devices complete after 94.318 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8385.244516] PM: early resume of devices complete after 0.168 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8385.245960] ath: phy0: ASPM enabled: 0x42
Mar 23 12:51:55 Lap200314 kernel: [ 8385.245989] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.246921] usb usb2: root hub lost power or was reset
Mar 23 12:51:55 Lap200314 kernel: [ 8385.247266] usb usb3: root hub lost power or was reset
Mar 23 12:51:55 Lap200314 kernel: [ 8385.247608] usb usb4: root hub lost power or was reset
Mar 23 12:51:55 Lap200314 kernel: [ 8385.247936] usb usb5: root hub lost power or was reset
Mar 23 12:51:55 Lap200314 kernel: [ 8385.488213] usb 1-2: reset high-speed USB device number 3 using ehci-pci
Mar 23 12:51:55 Lap200314 kernel: [ 8385.576072] ata3: SATA link down (SStatus 0 SControl 300)
Mar 23 12:51:55 Lap200314 kernel: [ 8385.880229] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Mar 23 12:51:55 Lap200314 kernel: [ 8386.644058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 23 12:51:55 Lap200314 kernel: [ 8386.645392] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 23 12:51:55 Lap200314 kernel: [ 8386.652694] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Mar 23 12:51:55 Lap200314 kernel: [ 8386.653192] ata1.00: configured for UDMA/133
Mar 23 12:51:55 Lap200314 kernel: [ 8386.668170] sd 0:0:0:0: [sda] Starting disk
Mar 23 12:51:55 Lap200314 kernel: [ 8386.756218] PM: resume of devices complete after 1511.691 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8386.756635] Restarting tasks ... done.
Mar 23 12:51:55 Lap200314 kernel: [ 8386.771582] video LNXVIDEO:00: Restoring backlight state
Mar 23 12:51:57 Lap200314 kernel: [ 8388.283782] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar 23 12:51:57 Lap200314 kernel: [ 8388.553386] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 12:51:59 Lap200314 kernel: [ 8390.501285] wlan0: authenticate with 00:19:70:ab:b2:33
Mar 23 12:51:59 Lap200314 kernel: [ 8390.521940] wlan0: send auth to 00:19:70:ab:b2:33 (try 1/3)
Mar 23 12:51:59 Lap200314 kernel: [ 8390.524612] wlan0: authenticated
Mar 23 12:51:59 Lap200314 kernel: [ 8390.528098] wlan0: associate with 00:19:70:ab:b2:33 (try 1/3)
Mar 23 12:51:59 Lap200314 kernel: [ 8390.531696] wlan0: RX AssocResp from 00:19:70:ab:b2:33 (capab=0x431 status=0 aid=2)
Mar 23 12:51:59 Lap200314 kernel: [ 8390.531819] wlan0: associated
Mar 23 12:51:59 Lap200314 kernel: [ 8390.531903] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 23 12:51:59 Lap200314 kernel: [ 8390.532116] cfg80211: Calling CRDA for country: NA
Mar 23 12:51:59 Lap200314 kernel: [ 8390.598722] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:19:70:ab:b2:33
Mar 23 14:31:33 Lap200314 kernel: [14364.479221] wlan0: deauthenticating from 00:19:70:ab:b2:33 by local choice (reason=3)
Mar 23 14:31:33 Lap200314 kernel: [14364.549835] cfg80211: Calling CRDA to update world regulatory domain
Mar 23 14:31:34 Lap200314 kernel: [14365.700689] cfg80211: World regulatory domain updated:
Mar 23 14:31:34 Lap200314 kernel: [14365.700700] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 23 14:31:34 Lap200314 kernel: [14365.700708] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700715] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700723] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700730] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700737] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700744] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 23 14:48:28 Lap200314 kernel: [14368.482931] PM: Syncing filesystems ... done.
Mar 23 14:48:28 Lap200314 kernel: [14368.624283] Freezing user space processes ... (elapsed 0.032 seconds) done.
Mar 23 14:48:28 Lap200314 kernel: [14368.656645] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar 23 14:48:28 Lap200314 kernel: [14368.658285] Suspending console(s) (use no_console_suspend to debug)
Mar 23 14:48:28 Lap200314 kernel: [14368.658932] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 23 14:48:28 Lap200314 kernel: [14368.659964] sd 0:0:0:0: [sda] Stopping disk
Mar 23 14:48:28 Lap200314 kernel: [14369.292201] PM: suspend of devices complete after 633.525 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.292567] PM: late suspend of devices complete after 0.353 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.292826] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.324246] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340120] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340204] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340285] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340366] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340633] PM: noirq suspend of devices complete after 48.060 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.340681] ACPI: Preparing to enter system sleep state S3
Mar 23 14:48:28 Lap200314 kernel: [14369.340824] PM: Saving platform NVS memory
Mar 23 14:48:28 Lap200314 kernel: [14369.342149] Disabling non-boot CPUs ...
Mar 23 14:48:28 Lap200314 kernel: [14369.444033] smpboot: CPU 1 is now offline
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] ACPI: Low-level resume complete
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S0_] (20131115/hwxface-580)
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] PM: Restoring platform NVS memory
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] Enabling non-boot CPUs ...
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] x86: Booting SMP configuration:
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar 23 14:48:28 Lap200314 kernel: [14369.343798] Initializing CPU#1
Mar 23 14:48:28 Lap200314 kernel: [14369.343798] Disabled fast string operations
Mar 23 14:48:28 Lap200314 kernel: [14369.457128] CPU1 is up
Mar 23 14:48:28 Lap200314 kernel: [14369.457736] ACPI: Waking up from system sleep state S3
Mar 23 14:48:28 Lap200314 kernel: [14369.488483] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.488571] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.488656] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.488741] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.504126] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.552312] PM: noirq resume of devices complete after 94.371 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.552519] PM: early resume of devices complete after 0.170 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.553960] ath: phy0: ASPM enabled: 0x42
Mar 23 14:48:28 Lap200314 kernel: [14369.553989] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.554899] usb usb2: root hub lost power or was reset
Mar 23 14:48:28 Lap200314 kernel: [14369.555252] usb usb3: root hub lost power or was reset
Mar 23 14:48:28 Lap200314 kernel: [14369.555590] usb usb4: root hub lost power or was reset
Mar 23 14:48:28 Lap200314 kernel: [14369.555913] usb usb5: root hub lost power or was reset
Mar 23 14:48:28 Lap200314 kernel: [14369.796235] usb 1-2: reset high-speed USB device number 3 using ehci-pci
Mar 23 14:48:28 Lap200314 kernel: [14369.880164] ata3: SATA link down (SStatus 0 SControl 300)
Mar 23 14:48:28 Lap200314 kernel: [14370.188235] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Mar 23 14:48:28 Lap200314 kernel: [14370.948162] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 23 14:48:28 Lap200314 kernel: [14370.949627] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 23 14:48:28 Lap200314 kernel: [14370.964983] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Mar 23 14:48:28 Lap200314 kernel: [14370.965536] ata1.00: configured for UDMA/133
Mar 23 14:48:28 Lap200314 kernel: [14370.980288] sd 0:0:0:0: [sda] Starting disk
Mar 23 14:48:28 Lap200314 kernel: [14370.996099] ACPI Error: [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dswload2-330)
Mar 23 14:48:28 Lap200314 kernel: [14370.996107] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20131115/psobject-222)
Mar 23 14:48:28 Lap200314 kernel: [14370.996121] ACPI Error: Method parse/execution failed [\_SB_.PCI0.WMID.WMBA] (Node f7456b18), AE_ALREADY_EXISTS (20131115/psparse-536)
Mar 23 14:48:28 Lap200314 kernel: [14371.064581] ACPI: Marking method WMBA as Serialized because of AE_ALREADY_EXISTS error
Mar 23 14:48:28 Lap200314 kernel: [14371.064684] PM: resume of devices complete after 1512.156 msecs
Mar 23 14:48:28 Lap200314 kernel: [14371.065082] Restarting tasks ... done.
Mar 23 14:48:28 Lap200314 kernel: [14371.080480] video LNXVIDEO:00: Restoring backlight state
Mar 23 14:48:29 Lap200314 kernel: [14372.433168] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar 23 14:48:30 Lap200314 kernel: [14372.697373] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 14:48:32 Lap200314 kernel: [14374.754380] wlan0: authenticate with 00:19:70:ab:b2:33
Mar 23 14:48:32 Lap200314 kernel: [14374.775997] wlan0: send auth to 00:19:70:ab:b2:33 (try 1/3)
Mar 23 14:48:32 Lap200314 kernel: [14374.779100] wlan0: authenticated
Mar 23 14:48:32 Lap200314 kernel: [14374.784144] wlan0: associate with 00:19:70:ab:b2:33 (try 1/3)
Mar 23 14:48:32 Lap200314 kernel: [14374.789954] wlan0: RX AssocResp from 00:19:70:ab:b2:33 (capab=0x431 status=0 aid=2)
Mar 23 14:48:32 Lap200314 kernel: [14374.790103] wlan0: associated
Mar 23 14:48:32 Lap200314 kernel: [14374.790207] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 23 14:48:32 Lap200314 kernel: [14374.790533] cfg80211: Calling CRDA for country: NA
Mar 23 14:48:32 Lap200314 kernel: [14374.888752] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:19:70:ab:b2:33

ArnVaker · 2014-03-23 15:38:47

[quote=Arristo]Przeczytałem tego "buga" ;) ale nie bardzo wiem jakie to ma odniesienie do mojej sytuacji.[/quote]

Kod:

# fuser -V
fuser (PSmisc) 22.21

Kod:

# fuser -u /var/lib/dpkg/lock 
Specified filename /var/lib/dpkg/lock is not a mountpoint.

Jeśli coś wywołuje ten uwalony fuser na /var/lib/dpkg/lock, to taki jest efekt.

[quote=Arristo]Skąd się wziął u mnie ten "nie punkt" ;) montowania[/quote]
W sensie skąd się wziął ten plik? dpkg go tworzy.
[quote=Arristo]i jak się go pozbyć?[/quote]
Nie pozbywać się, ten plik jest potrzebny.

Arristo · 2014-03-23 16:02:21

[quote=ArnVaker]Jeśli coś wywołuje ten uwalony fuser na /var/lib/dpkg/lock, to taki jest efekt.[/quote]
To znaczy, że przyczyna leży po stronie tego "uwalonego fusera"?

Napisałem ten wątek, gdyż miałem wrażenie, że tuż po instalacji tego przystanku

Kod:

Specified filename /var/lib/dpkg/lock is not a mountpoint.

nie było.

Nie wiem skąd to się wzięło i jak się tego pozbyć.
Wiem tylko, że to jest potrzebny plik systemowy i po wykasowaniu jest odtwarzany przez system .

ilin · 2014-03-23 16:06:46

W tych logach nic nie ma.

Moze cos wiecej o tym komunikacie.
Poprzedzającą linię .

ArnVaker · 2014-03-23 16:07:50

Jeśli w ogóle to jest dobry trop, to tutaj muszą być dwa warunki spełnione: musisz mieć zainstalowany ten uwalony fuser oraz mieć w systemie coś co wywołuje go na /var/lib/dpkg/lock podczas startu.

Co do pierwszego:

Kod:

apt-cache policy psmisc

Co do drugiego: sprawdziłem u siebie na tym uwalonym fuser i u mnie nic go nie wywołuje podczas startu systemu. Co tam wyżej u Ciebie jest nad tym komunikatem? Niżej w sumie też może trafić się coś przydatnego.

Arristo · 2014-03-23 16:46:44

[quote=ArnVaker]Jeśli w ogóle to jest dobry trop, to tutaj muszą być dwa warunki spełnione: musisz mieć zainstalowany ten uwalony fuser oraz mieć w systemie coś co wywołuje go na /var/lib/dpkg/lock podczas startu.

Co do pierwszego:

Kod:

apt-cache policy psmisc

Co do drugiego: sprawdziłem u siebie na tym uwalonym fuser i u mnie nic go nie wywołuje podczas startu systemu. Co tam wyżej u Ciebie jest nad tym komunikatem? Niżej w sumie też może trafić się coś przydatnego.[/quote]

Kod:

# apt-cache policy psmisc
psmisc:
  Zainstalowana: 22.21-1
  Kandydująca:   22.21-1
  Tabela wersji:
 *** 22.21-1 0
        500 http://ftp.pl.debian.org/debian/ jessie/main i386 Packages
        100 /var/lib/dpkg/status

A jeśli chodzi o to co się pojawia przed i po tym komunikacie, to przed startuje clamav demon, a po cups demon. Wiem, że ten clamav może wywołać uśmiech, ale staram się chronić windowsową brać z którą koresponduję przed przesłaniem im jakiegoś zakażonego badziewia.
To co dla mnie nie stanowi zagrożenia, może zagrozić jednak innym.

Ostatnio edytowany przez Arristo (2014-03-23 17:00:57)

ArnVaker · 2014-03-23 16:49:25

Co do psmisc, możesz sprawdzić:

Kod:

cd /tmp/
wget http://snapshot.debian.org/archive/debian/20120920T153558Z/pool/main/p/psmisc/psmisc_22.20-1_i386.deb
dpkg -i psmisc_22.20-1_i386.deb

W ogóle fajnie jakbyś się odnosił do wszystkich wypowiedzi, a nie jedynie do niektórych. :)

Arristo · 2014-03-23 17:13:43

[quote=ArnVaker]W ogóle fajnie jakbyś się odnosił do wszystkich wypowiedzi, a nie jedynie do niektórych. :)[/quote]
OK :) masz rację ale jestem bardzo wdzięczny za każdą podpowiedź i dlatego staram się na nie reagować.

A co do tematu, to zainstalowałem co podałeś, czyli [b]psmisc_22.20-1_i386.deb[/b] i co mam dalej zrobić?

ArnVaker · 2014-03-23 17:15:32

[quote=Arristo]OK :) masz rację ale jestem bardzo wdzięczny za każdą podpowiedź i dlatego staram się na nie reagować.[/quote]
Chodziło mi właśnie o to, że niektóre pomijasz. ;)

[quote=Arristo]A co do tematu, to zainstalowałem co podałeś, czyli [b]psmisc_22.20-1_i386.deb[/b] i co mam dalej zrobić?[/quote]
Restart i sprawdzić czy dalej będzie ten komunikat. Jeżeli tak, to trzeba będzie jakoś zlokalizować co konkretnie go wywołuje.

[b]EDIT:[/b] Jeszcze dla pewności sprawdź czy siedzi ta starsza wersja teraz:

Kod:

apt-cache policy psmisc

Arristo · 2014-03-23 17:29:55

To jest po restarcie i aktualizacji [b]psmisc[/b]

Kod:

# apt-cache policy psmisc
psmisc:
  Zainstalowana: 22.21-1
  Kandydująca:   22.21-1
  Tabela wersji:
 *** 22.21-1 0
        500 http://ftp.pl.debian.org/debian/ jessie/main i386 Packages
        100 /var/lib/dpkg/status

A co restartu, to go zrobiłem i komunikat już się nie nie pojawił, ale zatrzymał się na dłużej przy [b]cups[/b]

Po wejściu na moje konto okazało się że [b]psmisc[/b] jest do aktualizacji, więc ją wykonałem i... znowu pojawił mi się ten komunikat przy kolejnym restarcie.

Ostatnio edytowany przez Arristo (2014-03-23 17:45:54)

ArnVaker · 2014-03-23 17:49:30

Zainstalowałeś poprawnie działającą wersję psmisc i komunikat zniknął, zaktualizowałeś ponownie do uwalonej i komunikat wrócił. Chyba jasne? :)

Czasem wcześniej nie wisiał też na cups, a nie na tym komunikacie? Masz w ogóle drukarkę?

Arristo · 2014-03-23 17:53:25

Debiana mam na laptopie i czasem podłączam go do drukarki, a bezpośrednio po instalacji systemu nie wisiał ani na [b]cups[/b] ani na niczym innym -szybko się ładował.

A co do naszej paczki o imieniu [b]psmisc[/b], to chyba nic nie pozostaje innego jak czekać na jej kolejną aktualizację?

Ostatnio edytowany przez Arristo (2014-03-23 17:56:16)

Time (s)	Query
0.00015	SET CHARSET latin2
0.00004	SET NAMES latin2
0.00156	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.133.142.2' WHERE u.id=1
0.00082	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.133.142.2', 1728271897)
0.00041	SELECT * FROM punbb_online WHERE logged<1728271597
0.00277	SELECT topic_id FROM punbb_posts WHERE id=260905
0.00056	SELECT id FROM punbb_posts WHERE topic_id=25478 ORDER BY posted
0.00084	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=25478 AND t.moved_to IS NULL
0.00005	SELECT search_for, replace_with FROM punbb_censoring
0.00365	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=25478 ORDER BY p.id LIMIT 0,25
0.00128	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=25478
Total query time: 0.01213 s

Forum Debian Users Gang

Ogłoszenie

#1 2014-03-22 21:33:35

Arristo - Użytkownik

Dziwny plik

Kod:

Kod:

Kod:

#2 2014-03-22 21:41:32

ArnVaker - Kapelusznik

Re: Dziwny plik

#3 2014-03-22 21:56:44

Arristo - Użytkownik

Re: Dziwny plik

#4 2014-03-22 22:14:54

menel - Użytkownik

Re: Dziwny plik

Kod:

#5 2014-03-22 22:17:43

ArnVaker - Kapelusznik

Re: Dziwny plik

#6 2014-03-23 09:17:51

Arristo - Użytkownik

Re: Dziwny plik

Kod:

Kod:

#7 2014-03-23 09:47:21

ilin - Palacz

Re: Dziwny plik

#8 2014-03-23 10:08:32

Arristo - Użytkownik

Re: Dziwny plik

Kod:

Kod:

#9 2014-03-23 10:13:01

ilin - Palacz

Re: Dziwny plik

Kod:

#10 2014-03-23 10:19:20

Arristo - Użytkownik

Re: Dziwny plik

Kod:

#11 2014-03-23 10:40:59

ilin - Palacz

Re: Dziwny plik

#12 2014-03-23 11:08:42

lis6502 - Łowca lamerów

Re: Dziwny plik

Kod:

#13 2014-03-23 13:08:46

Arristo - Użytkownik

Re: Dziwny plik

Kod:

#14 2014-03-23 15:31:04

Arristo - Użytkownik

Re: Dziwny plik

Kod:

#15 2014-03-23 15:38:47

ArnVaker - Kapelusznik

Re: Dziwny plik

Kod:

Kod:

#16 2014-03-23 16:02:21

Arristo - Użytkownik

Re: Dziwny plik

Kod:

#17 2014-03-23 16:06:46

ilin - Palacz

Re: Dziwny plik

#18 2014-03-23 16:07:50

ArnVaker - Kapelusznik

Re: Dziwny plik

Kod:

#19 2014-03-23 16:46:44

Arristo - Użytkownik

Re: Dziwny plik

Kod:

Kod:

#20 2014-03-23 16:49:25

ArnVaker - Kapelusznik