Forum Debian Users Gang

Polskie forum dyskusyjne miłośników dystrybucji Debian GNU/Linux

Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

Forum Debian Users Gang
» Instalacja i podstawowa konfiguracja
» Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

#1 2014-04-30 01:44:03

Madras - Użytkownik

Madras: Użytkownik; Zarejestrowany: 2014-04-30

Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Witam, ostatnio postanowiłem przejść z Debianem z wirtualnej maszyny na dysk twardy. Na virtualboxie pod windowsem zainstalowałem go bez problemu z obrazu netinstall. Niestety tak różowo przy i po instalacji na hdd tego distra już nie jest. Najpierw, aby w ogóle chciał zainstalować oprogramowanie z sieci, musiałem podłączyć pendrive z firmware od karty sieciowej, gdyż potrzebował niewolnych sterowników. Kiedy już udało mi się wgrać system na dysk, to okazało się, że znowu nie mam dostępu do internetu... Znalazłem kilka poradników, jak to niby zrobić, ale sęk w tym, iż wymagano podłączenia się z siecią przez kabel. Niestety ta opcja jest u mnie raczej nie możliwa. Stąd czy mogę, jak przypuszczam wymagany sterownik do obsługi karty, wgrać na pendrive z windowsa np., a później zainstalować go jakoś po Debianem? Karta sieciowa to Realtek rtl 8191se v2, a wersja systemu 7.4.

Jakby ktoś miał czas i chęci na łopatologiczne wytłumaczenie problemu, to byłbym niezmiernie wdzięczny ;)

Offline

#2 2014-04-30 01:56:41

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Na początek:

Kod:

lspci |egrep -i 'net|wire'
dmesg

Pewnie brakuje firmware (a nie sterowników): [deb]firmware-realtek[/deb].
Mogłeś od razu użyć płyty z dodatkowym firmware.

Offline

#3 2014-04-30 18:57:56

Madras - Użytkownik

Madras: Użytkownik; Zarejestrowany: 2014-04-30

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Mam problem ze skopiowaniem treści z konsoli tty. Chciałem zaznaczyć wszystko za pomocą shift+ctrl+a, następnie skopiować shift+ctrl+c i wkleić w nano. Niestety te skróty nie działają w tej konsoli, więc nie wiem jak mógłbym pokazać wyskakujący kod.

[quote=yossarian]Pewnie brakuje firmware (a nie sterowników): [deb]firmware-realtek[/deb].
Mogłeś od razu użyć płyty z dodatkowym firmware.[/quote]
Rozumiem, że mogłem zrobić to podczas instalacji systemu. Jeżeli nie było by to jakoś zbyt zagmatwane, to mogę bez problemu zrobić reinstalkę Debiana.

Offline

#4 2014-04-30 19:04:25

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Możesz przekierować wyniku do pliku:

Kod:

lspci |egrep -i 'net|wire' > lspci
dmesg > dmesg

I potem w danym katalogu będziesz miał zapisane te pliki w formie tekstowej.

Możesz na razie pobrać tamten pakiet: [deb]firmware-realtek[/deb] i go zainstalować:

Kod:

dpkg -i firmware-realtek

Wtedy po restarcie powinno się załadować firmware.

Offline

#5 2014-04-30 19:30:58

thomsson - Dyskutant

thomsson: Dyskutant; Zarejestrowany: 2011-10-26

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

albo zaznaczyć fragment tekstu który chcesz skopiować i wkleić do wiadomości środkowym przyciskiem myszy (tylko nie zamykaj przed wklejeniem terminala, bo schowek linuxowy "zapomina" o skopiowanych fragmentach pochodzących z zamkniętych okien (ot ciekawostka)

ilin napisał
[i]"DUG to tez moja mała ojczyzna"[/i]

Offline

#6 2014-04-30 20:46:27

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

@thomsson:
[quote=Madras]Mam problem ze skopiowaniem treści z konsoli tty.[/quote]

Offline

#7 2014-04-30 20:50:09

garrick - Użytkownik

garrick: Użytkownik; Zarejestrowany: 2013-12-30

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

do niektórych rzeczy tylko xterm sie nadaje;>

sry za oftop chyba mam lekkie zwidy:)

mozesz sprobowac jessie (debian testing) moj realtek chodzi bez firmwar'u

Ostatnio edytowany przez garrick (2014-04-30 22:06:48)

Debian/xfce/*box

[url=https://docs.google.com/document/d/1J2tqbLFvsfIAh9QaagiLQWFMoN6CxPsGmo9jRVW7Klk/edit?usp=sharing][img]http://s18.postimg.org/x7bxep3t1/res.gif[/img][/url]

Offline

#8 2014-04-30 22:44:00

Madras - Użytkownik

Madras: Użytkownik; Zarejestrowany: 2014-04-30

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

@yossarian zrobiłem tak jak napisałeś, ale nie potrafię przenieść tych plików na pendrive... Po zamontowaniu urządzenia, a następnie skopiowaniu plików, pendrive zostaje zamazany i nic z niego nie mogę już odzyskać... Jedynym rozwiązaniem pozostaje później sformatowanie pendrive.

Co do tego pakietu, to najpierw mam go ściągnąć, np pod windowsem, skopiować na pendrive i z tego urządzenia wgrać na Debiana?

Offline

#9 2014-04-30 23:01:14

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

[quote=Madras]Po zamontowaniu urządzenia, a następnie skopiowaniu plików, pendrive zostaje zamazany i nic z niego nie mogę już odzyskać... Jedynym rozwiązaniem pozostaje później sformatowanie pendrive.[/quote]
Już wole nie wnikać w szczegóły bo pewnie coś źle robisz.
Nie masz jakiegoś LiveCD? Wtedy nawet totalny lamer sobie skopiuje pliki myszką.

Co do tego pakietu, to najpierw mam go ściągnąć, np pod windowsem, skopiować na pendrive i z tego urządzenia wgrać na Debiana?[/quote]
Tak można.

Offline

#10 2014-04-30 23:25:24

Madras - Użytkownik

Madras: Użytkownik; Zarejestrowany: 2014-04-30

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Nie wiem, ja tak to robiłem. Pliki lspci i dmesg już wcześniej utworzyłem

Kod:

# fdisk -l
# mount /dev/sdb1 /mnt
# cp lspci /dev/sdb1
# cp dmesg /dev/sdb1
# umount /dev/sdb1

LiveCD się znajdzie, nie siedzę na razie na windowsie, ale tam miałem jakieś jeszcze distra pobrane.

Offline

#11 2014-04-30 23:29:18

ArnVaker - Kapelusznik

ArnVaker: Kapelusznik; Skąd: Midgard; Zarejestrowany: 2009-05-06

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Kopiuj do katalogu w którym zamontowałeś partycję.

[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]

Offline

#12 2014-05-01 00:09:26

Madras - Użytkownik

Madras: Użytkownik; Zarejestrowany: 2014-04-30

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

[quote=ArnVaker]Kopiuj do katalogu w którym zamontowałeś partycję.[/quote]
Dzięki, nawet nie wiesz jak dla mnie to była cenna uwaga ;) 2h męczarni minęły :)

Lspci:

Kod:

02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
08:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1)

Dmesg:

Kod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=0ba83785-6421-4667-b737-44ec217bc08d ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000de59d000 (usable)
[    0.000000]  BIOS-e820: 00000000de59d000 - 00000000de79d000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000de79d000 - 00000000df70d000 (usable)
[    0.000000]  BIOS-e820: 00000000df70d000 - 00000000dfb16000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dfb16000 - 00000000dfd3f000 (usable)
[    0.000000]  BIOS-e820: 00000000dfd3f000 - 00000000dfdbf000 (reserved)
[    0.000000]  BIOS-e820: 00000000dfdbf000 - 00000000dfebf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dfebf000 - 00000000dfef7000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dfef7000 - 00000000dff00000 (usable)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: TOSHIBA Satellite L645D/Guam, BIOS 2.20 06/28/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x110000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000DFEBE000 mask FFFFFFFFF000 uncachable
[    0.000000]   4 base 0000FFE00000 mask FFFFFFE00000 write-protect
[    0.000000]   5 base 000100000000 mask FFFFF0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000120000000 aka 4608M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000dff00000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00dfe00000 page 2M
[    0.000000]  00dfe00000 - 00dff00000 page 4k
[    0.000000] kernel direct mapping tables up to dff00000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000110000000
[    0.000000]  0100000000 - 0110000000 page 2M
[    0.000000] kernel direct mapping tables up to 110000000 @ dfefe000-dff00000
[    0.000000] RAMDISK: 36c72000 - 37631000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 TOSQCI)
[    0.000000] ACPI: XSDT 00000000dfef6120 0005C (v01 TOSQCI TOSQCI00 00000003      01000013)
[    0.000000] ACPI: FACP 00000000dfef5000 000F4 (v04 TOSQCI TOSQCI00 00000003 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000dfee2000 0FA11 (v01 TOSQCI TOSQCI00 F0000000 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000dfe9c000 00040
[    0.000000] ACPI: HPET 00000000dfef4000 00038 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 00000000dfef3000 00084 (v02 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000dfef2000 0003C (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 00000000dfee1000 00028 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 00000000dfee0000 00176 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000dfedf000 0052A (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000110000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000110000000
[    0.000000]   NODE_DATA [000000010fffb000 - 000000010fffffff]
[    0.000000]  [ffffea0000000000-ffffea0003bfffff] PMD -> [ffff88010ba00000-ffff88010effffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00110000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000de59d
[    0.000000]     0: 0x000de79d -> 0x000df70d
[    0.000000]     0: 0x000dfb16 -> 0x000dfd3f
[    0.000000]     0: 0x000dfef7 -> 0x000dff00
[    0.000000]     0: 0x00100000 -> 0x00110000
[    0.000000] On node 0 totalpages: 980686
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 896887 pages, LIFO batch:31
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 64640 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000de59d000 - 00000000de79d000
[    0.000000] PM: Registered nosave memory: 00000000df70d000 - 00000000dfb16000
[    0.000000] PM: Registered nosave memory: 00000000dfd3f000 - 00000000dfdbf000
[    0.000000] PM: Registered nosave memory: 00000000dfdbf000 - 00000000dfebf000
[    0.000000] PM: Registered nosave memory: 00000000dfebf000 - 00000000dfef7000
[    0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000f9000000
[    0.000000] PM: Registered nosave memory: 00000000f9000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:18100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88010fc00000 s82944 r8192 d23552 u524288
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 965449
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=0ba83785-6421-4667-b737-44ec217bc08d ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ fe06000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[    0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[    0.000000] Memory: 3716904k/4456448k available (3429k kernel code, 533704k absent, 205840k reserved, 3309k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2294.392 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.78 BogoMIPS (lpj=9177568)
[    0.004008] pid_max: default: 32768 minimum: 301
[    0.004059] Security Framework initialized
[    0.004064] AppArmor: AppArmor disabled by boot time parameter
[    0.004363] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005746] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008688] Mount-cache hash table entries: 256
[    0.008805] Initializing cgroup subsys cpuacct
[    0.008810] Initializing cgroup subsys memory
[    0.008822] Initializing cgroup subsys devices
[    0.008826] Initializing cgroup subsys freezer
[    0.008828] Initializing cgroup subsys net_cls
[    0.008830] Initializing cgroup subsys blkio
[    0.008837] Initializing cgroup subsys perf_event
[    0.008865] tseg: 00dff00000
[    0.008868] CPU: Physical Processor ID: 0
[    0.008869] CPU: Processor Core ID: 0
[    0.008872] mce: CPU supports 6 MCE banks
[    0.008880] using AMD E400 aware idle routine
[    0.009194] ACPI: Core revision 20110623
[    0.009197] TOSHIBA Satellite detected - force copy of DSDT to local memory
[    0.009352] ACPI: Forced DSDT copy: length 0x0FA11 copied locally, original unmapped
[    0.016389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059397] CPU0: AMD Turion(tm) II P520 Dual-Core Processor stepping 03
[    0.060003] Performance Events: AMD PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      4
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1
[    0.060003] smpboot cpu 1: start_ip = 9a000
[    0.148026] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148045] Brought up 2 CPUs
[    0.148047] Total of 2 processors activated (9177.02 BogoMIPS).
[    0.148044] System has AMD C1E enabled
[    0.148068] Switch to broadcast mode on CPU1
[    0.148655] Switch to broadcast mode on CPU0
[    0.148655] devtmpfs: initialized
[    0.152042] PM: Registering ACPI NVS region at de59d000 (2097152 bytes)
[    0.152086] PM: Registering ACPI NVS region at df70d000 (4231168 bytes)
[    0.152218] PM: Registering ACPI NVS region at dfdbf000 (1048576 bytes)
[    0.152415] print_constraints: dummy: 
[    0.152473] NET: Registered protocol family 16
[    0.152559] node 0 link 0: io port [0, ffffff]
[    0.152562] TOM: 00000000e0000000 aka 3584M
[    0.152564] Fam 10h mmconf [mem 0xf8000000-0xfbffffff]
[    0.152567] node 0 link 0: mmio [a0000, bffff]
[    0.152570] node 0 link 0: mmio [e0000000, efffffff]
[    0.152573] node 0 link 0: mmio [f0000000, f40fffff]
[    0.152575] node 0 link 0: mmio [f4100000, f42fffff]
[    0.152578] node 0 link 0: mmio [f4300000, f7ffffff]
[    0.152580] node 0 link 0: mmio [f8000000, fbffffff] ==> none
[    0.152583] node 0 link 0: mmio [fc000000, ff6fffff]
[    0.152585] TOM2: 0000000120000000 aka 4608M
[    0.152587] bus: [00, 1f] on node 0 link 0
[    0.152589] bus: 00 index 0 [io  0x0000-0xffff]
[    0.152591] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.152593] bus: 00 index 2 [mem 0xe0000000-0xf7ffffff]
[    0.152595] bus: 00 index 3 [mem 0xfc000000-0xffffffff]
[    0.152597] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[    0.152612] Extended Config Space enabled on 1 nodes
[    0.152635] ACPI: bus type pci registered
[    0.152711] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.152715] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.152718] PCI: MMCONFIG for 0000 [bus00-0f] at [mem 0xf8000000-0xf8ffffff] (base 0xf8000000) (size reduced!)
[    0.155104] PCI: Using configuration type 1 for base access
[    0.155240] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.155242] mtrr: probably your BIOS does not setup all CPUs.
[    0.155244] mtrr: corrected configuration.
[    0.156271] bio: create slab <bio-0> at 0
[    0.156271] ACPI: Added _OSI(Module Device)
[    0.156271] ACPI: Added _OSI(Processor Device)
[    0.156271] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156271] ACPI: Added _OSI(Processor Aggregator Device)
[    0.157593] ACPI: EC: Look up EC in DSDT
[    0.159117] ACPI: Executed 1 blocks of module-level executable AML code
[    0.164368] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.272052] ACPI Error: [\_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.272062] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node ffff88010b27ff60), AE_NOT_FOUND (20110623/psparse-536)
[    0.272077] Fail in evaluating the _REG object of EC device. Broken bios is suspected.
[    0.272115] ACPI: Interpreter enabled
[    0.272120] ACPI: (supports S0 S1 S3 S4 S5)
[    0.272147] ACPI: Using IOAPIC for interrupt routing
[    0.295360] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.295564] ACPI: No dock devices found.
[    0.295567] HEST: Table not found.
[    0.295571] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.295571] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.295571] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.295571] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
[    0.295571] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
[    0.295571] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[    0.295571] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[    0.295571] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[    0.295571] pci 0000:00:01.0: [1179:9602] type 1 class 0x000604
[    0.295571] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[    0.295571] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.295571] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[    0.295571] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.295571] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.295571] pci 0000:00:11.0: reg 10: [io  0xc038-0xc03f]
[    0.295571] pci 0000:00:11.0: reg 14: [io  0xc04c-0xc04f]
[    0.295571] pci 0000:00:11.0: reg 18: [io  0xc030-0xc037]
[    0.295571] pci 0000:00:11.0: reg 1c: [io  0xc048-0xc04b]
[    0.295571] pci 0000:00:11.0: reg 20: [io  0xc010-0xc01f]
[    0.295571] pci 0000:00:11.0: reg 24: [mem 0xf4307000-0xf43073ff]
[    0.295571] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.295571] pci 0000:00:12.0: reg 10: [mem 0xf4306000-0xf4306fff]
[    0.295571] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.295571] pci 0000:00:12.2: reg 10: [mem 0xf4307600-0xf43076ff]
[    0.296050] pci 0000:00:12.2: supports D1 D2
[    0.296053] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.296075] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.296088] pci 0000:00:13.0: reg 10: [mem 0xf4305000-0xf4305fff]
[    0.296154] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.296554] pci 0000:00:13.2: reg 10: [mem 0xf4307500-0xf43075ff]
[    0.298837] pci 0000:00:13.2: supports D1 D2
[    0.298839] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.298862] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.298934] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.298954] pci 0000:00:14.2: reg 10: [mem 0xf4300000-0xf4303fff 64bit]
[    0.299015] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.299030] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.299101] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.299149] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[    0.299221] pci 0000:00:15.0: supports D1 D2
[    0.299250] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.299262] pci 0000:00:16.0: reg 10: [mem 0xf4304000-0xf4304fff]
[    0.299328] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.299728] pci 0000:00:16.2: reg 10: [mem 0xf4307400-0xf43074ff]
[    0.302115] pci 0000:00:16.2: supports D1 D2
[    0.302117] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.302138] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.302155] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.302169] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.302183] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.302200] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.302243] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
[    0.302252] pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[    0.302257] pci 0000:01:05.0: reg 14: [io  0xb000-0xb0ff]
[    0.302261] pci 0000:01:05.0: reg 18: [mem 0xf4200000-0xf420ffff]
[    0.302271] pci 0000:01:05.0: reg 24: [mem 0xf4100000-0xf41fffff]
[    0.302288] pci 0000:01:05.0: supports D1 D2
[    0.302324] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.302327] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.302330] pci 0000:00:01.0:   bridge window [mem 0xf4100000-0xf42fffff]
[    0.302334] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.302423] pci 0000:02:00.0: [10ec:8172] type 0 class 0x000280
[    0.302435] pci 0000:02:00.0: reg 10: [io  0x7000-0x70ff]
[    0.302444] pci 0000:02:00.0: reg 14: [mem 0xf3100000-0xf3103fff]
[    0.302520] pci 0000:02:00.0: supports D1 D2
[    0.302522] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.312106] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[    0.312112] pci 0000:00:04.0:   bridge window [io  0x7000-0xafff]
[    0.312116] pci 0000:00:04.0:   bridge window [mem 0xf3100000-0xf40fffff]
[    0.312120] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[    0.312170] pci 0000:08:00.0: [1969:2060] type 0 class 0x000200
[    0.312192] pci 0000:08:00.0: reg 10: [mem 0xf3000000-0xf303ffff 64bit]
[    0.312203] pci 0000:08:00.0: reg 18: [io  0x6000-0x607f]
[    0.312293] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.324058] pci 0000:00:06.0: PCI bridge to [bus 08-08]
[    0.324064] pci 0000:00:06.0:   bridge window [io  0x6000-0x6fff]
[    0.324067] pci 0000:00:06.0:   bridge window [mem 0xf3000000-0xf30fffff]
[    0.324130] pci 0000:00:14.4: PCI bridge to [bus 09-09] (subtractive decode)
[    0.324139] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.324142] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.324145] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.324148] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.324150] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.324153] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.324156] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.324159] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.324161] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.324164] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.324167] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.324169] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.324172] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.324175] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[    0.324177] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[    0.324180] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[    0.324228] pci 0000:00:15.0: PCI bridge to [bus 0a-0f]
[    0.324233] pci 0000:00:15.0:   bridge window [io  0x2000-0x5fff]
[    0.324237] pci 0000:00:15.0:   bridge window [mem 0xf2000000-0xf2ffffff]
[    0.324243] pci 0000:00:15.0:   bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
[    0.324265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.324513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.324564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    0.324619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[    0.324674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[    0.324756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.324838]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.324841]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.324843] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.331486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.331560] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.331632] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.331703] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.331759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.331801] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.331844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.331887] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.335946] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.335946] vgaarb: loaded
[    0.335946] vgaarb: bridge control possible 0000:01:05.0
[    0.335946] PCI: Using ACPI for IRQ routing
[    0.335946] PCI: pci_cache_line_size set to 64 bytes
[    0.335946] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.335946] reserve RAM buffer: 00000000de59d000 - 00000000dfffffff 
[    0.335946] reserve RAM buffer: 00000000df70d000 - 00000000dfffffff 
[    0.335946] reserve RAM buffer: 00000000dfd3f000 - 00000000dfffffff 
[    0.335946] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff 
[    0.335946] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.335946] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.335946] Switching to clocksource hpet
[    0.337698] pnp: PnP ACPI init
[    0.337714] ACPI: bus type pnp registered
[    0.338208] pnp 00:00: [bus 00-ff]
[    0.338211] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.338214] pnp 00:00: [io  0x0d00-0xffff window]
[    0.338216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.338219] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.338221] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.338223] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.338226] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.338228] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.338230] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.338232] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.338235] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.338237] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.338240] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.338243] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.338245] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.338248] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[    0.338250] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[    0.338252] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[    0.338255] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.338336] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.338556] pnp 00:01: [mem 0xfec00000-0xfec10fff]
[    0.338559] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.338561] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    0.338563] pnp 00:01: [mem 0xfed00000-0xfed00fff]
[    0.338565] pnp 00:01: [mem 0xfed61000-0xfed61fff]
[    0.338567] pnp 00:01: [mem 0xfed80000-0xfed80fff]
[    0.338623] system 00:01: [mem 0xfec00000-0xfec10fff] could not be reserved
[    0.338626] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.338629] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.338632] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.338635] system 00:01: [mem 0xfed61000-0xfed61fff] has been reserved
[    0.338638] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.338642] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.338750] pnp 00:02: [io  0x0000-0x000f]
[    0.338752] pnp 00:02: [io  0x0081-0x008f]
[    0.338754] pnp 00:02: [io  0x00c0-0x00df]
[    0.338757] pnp 00:02: [dma 4]
[    0.338791] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.338800] pnp 00:03: [io  0x00f0-0x00fe]
[    0.338813] pnp 00:03: [irq 13]
[    0.338846] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.338872] pnp 00:04: [io  0x0070-0x0071]
[    0.338877] pnp 00:04: [irq 8]
[    0.338911] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.338919] pnp 00:05: [io  0x0061]
[    0.338955] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.338981] pnp 00:06: [io  0x0060]
[    0.338983] pnp 00:06: [io  0x0064]
[    0.338991] pnp 00:06: [irq 1]
[    0.339027] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.339074] pnp 00:07: [irq 12]
[    0.339112] pnp 00:07: Plug and Play ACPI device, IDs TOS0100 SYN1000 SYN0002 PNP0f13 (active)
[    0.339129] pnp 00:08: [io  0x0010-0x001f]
[    0.339132] pnp 00:08: [io  0x002e-0x002f]
[    0.339134] pnp 00:08: [io  0x0072-0x0073]
[    0.339136] pnp 00:08: [io  0x0080]
[    0.339138] pnp 00:08: [io  0x00b0-0x00b1]
[    0.339141] pnp 00:08: [io  0x0092]
[    0.339143] pnp 00:08: [io  0x0400-0x04cf]
[    0.339145] pnp 00:08: [io  0x04d0-0x04d1]
[    0.339147] pnp 00:08: [io  0x04d6]
[    0.339149] pnp 00:08: [io  0x0550]
[    0.339151] pnp 00:08: [io  0x0680-0x06ff]
[    0.339153] pnp 00:08: [io  0x077a]
[    0.339155] pnp 00:08: [io  0x0c00-0x0c01]
[    0.339157] pnp 00:08: [io  0x0c14]
[    0.339159] pnp 00:08: [io  0x0c50-0x0c52]
[    0.339161] pnp 00:08: [io  0x0c6c]
[    0.339162] pnp 00:08: [io  0x0c6f]
[    0.339164] pnp 00:08: [io  0x0cd0-0x0cdb]
[    0.339225] system 00:08: [io  0x0400-0x04cf] has been reserved
[    0.339228] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.339230] system 00:08: [io  0x04d6] has been reserved
[    0.339233] system 00:08: [io  0x0550] has been reserved
[    0.339236] system 00:08: [io  0x0680-0x06ff] has been reserved
[    0.339238] system 00:08: [io  0x077a] has been reserved
[    0.339241] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.339243] system 00:08: [io  0x0c14] has been reserved
[    0.339246] system 00:08: [io  0x0c50-0x0c52] has been reserved
[    0.339249] system 00:08: [io  0x0c6c] has been reserved
[    0.339251] system 00:08: [io  0x0c6f] has been reserved
[    0.339254] system 00:08: [io  0x0cd0-0x0cdb] has been reserved
[    0.339257] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.339300] pnp 00:09: [mem 0x000e0000-0x000fffff]
[    0.339302] pnp 00:09: [mem 0xffe00000-0xffffffff]
[    0.339305] pnp 00:09: [mem 0xff800000-0xff80ffff]
[    0.339361] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.339364] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[    0.339367] system 00:09: [mem 0xff800000-0xff80ffff] has been reserved
[    0.339370] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.339705] pnp: PnP ACPI: found 10 devices
[    0.339707] ACPI: ACPI bus type pnp unregistered
[    0.347114] PCI: max bus depth: 1 pci_try_num: 2
[    0.347137] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.347140] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.347144] pci 0000:00:01.0:   bridge window [mem 0xf4100000-0xf42fffff]
[    0.347147] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.347151] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[    0.347154] pci 0000:00:04.0:   bridge window [io  0x7000-0xafff]
[    0.347157] pci 0000:00:04.0:   bridge window [mem 0xf3100000-0xf40fffff]
[    0.347160] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[    0.347164] pci 0000:00:06.0: PCI bridge to [bus 08-08]
[    0.347167] pci 0000:00:06.0:   bridge window [io  0x6000-0x6fff]
[    0.347170] pci 0000:00:06.0:   bridge window [mem 0xf3000000-0xf30fffff]
[    0.347175] pci 0000:00:14.4: PCI bridge to [bus 09-09]
[    0.347189] pci 0000:00:15.0: PCI bridge to [bus 0a-0f]
[    0.347192] pci 0000:00:15.0:   bridge window [io  0x2000-0x5fff]
[    0.347197] pci 0000:00:15.0:   bridge window [mem 0xf2000000-0xf2ffffff]
[    0.347201] pci 0000:00:15.0:   bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
[    0.347211] pci 0000:00:01.0: setting latency timer to 64
[    0.347222] pci 0000:00:04.0: setting latency timer to 64
[    0.347230] pci 0000:00:06.0: setting latency timer to 64
[    0.347241] pci 0000:00:15.0: setting latency timer to 64
[    0.347244] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.347247] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.347249] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.347252] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.347254] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.347257] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.347259] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[    0.347261] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[    0.347264] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[    0.347266] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[    0.347269] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[    0.347271] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[    0.347273] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[    0.347276] pci_bus 0000:00: resource 17 [mem 0xe0000000-0xf7ffffff]
[    0.347278] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
[    0.347281] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
[    0.347284] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.347286] pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf42fffff]
[    0.347289] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.347291] pci_bus 0000:02: resource 0 [io  0x7000-0xafff]
[    0.347294] pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf40fffff]
[    0.347296] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
[    0.347299] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.347301] pci_bus 0000:08: resource 1 [mem 0xf3000000-0xf30fffff]
[    0.347304] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
[    0.347306] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
[    0.347309] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[    0.347311] pci_bus 0000:09: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.347314] pci_bus 0000:09: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.347316] pci_bus 0000:09: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.347318] pci_bus 0000:09: resource 10 [mem 0x000d4000-0x000d7fff]
[    0.347321] pci_bus 0000:09: resource 11 [mem 0x000d8000-0x000dbfff]
[    0.347323] pci_bus 0000:09: resource 12 [mem 0x000dc000-0x000dffff]
[    0.347326] pci_bus 0000:09: resource 13 [mem 0x000e0000-0x000e3fff]
[    0.347328] pci_bus 0000:09: resource 14 [mem 0x000e4000-0x000e7fff]
[    0.347331] pci_bus 0000:09: resource 15 [mem 0x000e8000-0x000ebfff]
[    0.347333] pci_bus 0000:09: resource 16 [mem 0x000ec000-0x000effff]
[    0.347335] pci_bus 0000:09: resource 17 [mem 0xe0000000-0xf7ffffff]
[    0.347338] pci_bus 0000:09: resource 18 [mem 0xfc000000-0xfed3ffff]
[    0.347340] pci_bus 0000:09: resource 19 [mem 0xfed45000-0xffffffff]
[    0.347343] pci_bus 0000:0a: resource 0 [io  0x2000-0x5fff]
[    0.347345] pci_bus 0000:0a: resource 1 [mem 0xf2000000-0xf2ffffff]
[    0.347348] pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref]
[    0.347426] NET: Registered protocol family 2
[    0.347558] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.348594] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.351052] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.351362] TCP: Hash tables configured (established 524288 bind 65536)
[    0.351365] TCP reno registered
[    0.351376] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.351409] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.351587] NET: Registered protocol family 1
[    0.351599] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.612125] pci 0000:01:05.0: Boot video device
[    0.612186] PCI: CLS 64 bytes, default 64
[    0.612248] Unpacking initramfs...
[    0.836155] Freeing initrd memory: 9980k freed
[    0.839795] PCI-DMA: Disabling AGP.
[    0.839889] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    0.839891] PCI-DMA: using GART IOMMU.
[    0.839894] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.843280] Simple Boot Flag at 0x44 set to 0x1
[    0.843603] IBS: LVT offset 1 assigned
[    0.843616] perf: AMD IBS detected (0x0000001f)
[    0.843847] audit: initializing netlink socket (disabled)
[    0.843858] type=2000 audit(1398890530.836:1): initialized
[    0.858565] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.859509] VFS: Disk quotas dquot_6.5.2
[    0.859555] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.859635] msgmni has been set to 7407
[    0.859853] alg: No test for stdrng (krng)
[    0.859904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.859908] io scheduler noop registered
[    0.859910] io scheduler deadline registered
[    0.859926] io scheduler cfq registered (default)
[    0.860094] pcieport 0000:00:04.0: setting latency timer to 64
[    0.860126] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    0.860227] pcieport 0000:00:06.0: setting latency timer to 64
[    0.860250] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    0.860423] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.860445] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.860447] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.816307] ERST: Table is not found!
[    1.816309] GHES: HEST is not enabled!
[    1.816414] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.820450] Linux agpgart interface v0.103
[    1.820557] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.822845] i8042: Detected active multiplexing controller, rev 1.1
[    1.824515] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.824519] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.824549] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.824573] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.824596] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.824796] mousedev: PS/2 mouse device common for all mice
[    1.824842] rtc_cmos 00:04: RTC can wake from S4
[    1.824980] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.825006] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    1.825015] cpuidle: using governor ladder
[    1.825017] cpuidle: using governor menu
[    1.825211] TCP cubic registered
[    1.825274] NET: Registered protocol family 10
[    1.825736] Mobile IPv6
[    1.825739] NET: Registered protocol family 17
[    1.825743] Registering the dns_resolver key type
[    1.825944] PM: Hibernation image not present or could not be loaded.
[    1.825953] registered taskstats version 1
[    1.826937] rtc_cmos 00:04: setting system clock to 2014-04-30 20:42:12 UTC (1398890532)
[    1.826998] Initializing network drop monitor service
[    1.828273] Freeing unused kernel memory: 576k freed
[    1.828416] Write protecting the kernel read-only data: 6144k
[    1.831101] Freeing unused kernel memory: 648k freed
[    1.834158] Freeing unused kernel memory: 688k freed
[    1.840054] Refined TSC clocksource calibration: 2294.121 MHz.
[    1.840060] Switching to clocksource tsc
[    1.849181] udevd[50]: starting version 175
[    1.853484] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.870387] usbcore: registered new interface driver usbfs
[    1.870410] usbcore: registered new interface driver hub
[    1.898288] SCSI subsystem initialized
[    1.905547] usbcore: registered new device driver usb
[    1.906046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.906132] ehci_hcd 0000:00:12.2: setting latency timer to 64
[    1.906136] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.906159] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.906169] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.906189] QUIRK: Enable AMD PLL fix
[    1.906200] ehci_hcd 0000:00:12.2: debug port 1
[    1.906224] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf4307600
[    1.910776] atl1c 0000:08:00.0: setting latency timer to 64
[    1.920097] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.920132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.920135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.920138] usb usb1: Product: EHCI Host Controller
[    1.920140] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.920142] usb usb1: SerialNumber: 0000:00:12.2
[    1.920330] hub 1-0:1.0: USB hub found
[    1.920335] hub 1-0:1.0: 5 ports detected
[    1.920665] ehci_hcd 0000:00:13.2: setting latency timer to 64
[    1.920668] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.920678] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.920687] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.920710] ehci_hcd 0000:00:13.2: debug port 1
[    1.920725] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf4307500
[    1.932072] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.932102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.932105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.932108] usb usb2: Product: EHCI Host Controller
[    1.932110] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.932112] usb usb2: SerialNumber: 0000:00:13.2
[    1.932242] hub 2-0:1.0: USB hub found
[    1.932249] hub 2-0:1.0: 5 ports detected
[    1.932385] ehci_hcd 0000:00:16.2: setting latency timer to 64
[    1.932389] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    1.932398] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.932406] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.932429] ehci_hcd 0000:00:16.2: debug port 1
[    1.932443] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf4307400
[    1.937444] libata version 3.00 loaded.
[    1.940477] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.944146] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.944174] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.944178] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.944180] usb usb3: Product: EHCI Host Controller
[    1.944182] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.944184] usb usb3: SerialNumber: 0000:00:16.2
[    1.945110] hub 3-0:1.0: USB hub found
[    1.945115] hub 3-0:1.0: 4 ports detected
[    1.945463] ahci 0000:00:11.0: version 3.0
[    1.945616] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 3 Gbps 0xd impl SATA mode
[    1.945620] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs 
[    1.946359] scsi0 : ahci
[    1.946601] scsi1 : ahci
[    1.946750] scsi2 : ahci
[    1.946919] scsi3 : ahci
[    1.947226] ata1: SATA max UDMA/133 abar m1024@0xf4307000 port 0xf4307100 irq 19
[    1.947229] ata2: DUMMY
[    1.947232] ata3: SATA max UDMA/133 abar m1024@0xf4307000 port 0xf4307200 irq 19
[    1.947235] ata4: SATA max UDMA/133 abar m1024@0xf4307000 port 0xf4307280 irq 19
[    1.947410] ohci_hcd 0000:00:12.0: setting latency timer to 64
[    1.947414] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.947427] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.947458] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf4306000
[    1.982854] thermal LNXTHERM:00: registered as thermal_zone0
[    1.982857] ACPI: Thermal Zone [THRM] (26 C)
[    2.004222] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.004226] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.004229] usb usb4: Product: OHCI Host Controller
[    2.004231] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.004233] usb usb4: SerialNumber: 0000:00:12.0
[    2.004415] hub 4-0:1.0: USB hub found
[    2.004426] hub 4-0:1.0: 5 ports detected
[    2.004563] ohci_hcd 0000:00:13.0: setting latency timer to 64
[    2.004566] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.004575] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.004595] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf4305000
[    2.036712] atl1c 0000:08:00.0: version 1.0.1.0-NAPI
[    2.064100] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.064103] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.064106] usb usb5: Product: OHCI Host Controller
[    2.064108] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.064110] usb usb5: SerialNumber: 0000:00:13.0
[    2.064280] hub 5-0:1.0: USB hub found
[    2.064291] hub 5-0:1.0: 5 ports detected
[    2.064413] ohci_hcd 0000:00:16.0: setting latency timer to 64
[    2.064416] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    2.064424] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[    2.064446] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf4304000
[    2.124100] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.124103] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.124106] usb usb6: Product: OHCI Host Controller
[    2.124107] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.124109] usb usb6: SerialNumber: 0000:00:16.0
[    2.124308] hub 6-0:1.0: USB hub found
[    2.124320] hub 6-0:1.0: 4 ports detected
[    2.244097] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.264116] ata3: SATA link down (SStatus 0 SControl 300)
[    2.436075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.436105] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.437146] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC64G, max UDMA/133
[    2.437151] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.437916] ata4.00: ATAPI: MATSHITADVD-RAM UJ890ES, 1.80, max UDMA/100
[    2.438401] ata1.00: configured for UDMA/133
[    2.438626] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[    2.440610] ata4.00: configured for UDMA/100
[    2.446549] scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ890ES  1.80 PQ: 0 ANSI: 5
[    2.452338] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.452401] sd 0:0:0:0: [sda] Write Protect is off
[    2.452404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.452433] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.453967] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.453972] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.454124] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.577019]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[    2.577719] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.579622] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.579685] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.628075] usb 2-1: New USB device found, idVendor=0bda, idProduct=0158
[    2.628079] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.628082] usb 2-1: Product: USB2.0-CRW
[    2.628084] usb 2-1: Manufacturer: Generic
[    2.628085] usb 2-1: SerialNumber: 20071114173400000
[    2.636370] Initializing USB Mass Storage driver...
[    2.636427] usbcore: registered new interface driver usb-storage
[    2.636429] USB Mass Storage support registered.
[    2.657001] scsi4 : usb-storage 2-1:1.0
[    2.657099] usbcore: registered new interface driver ums-realtek
[    2.748104] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[    2.909031] usb 2-5: New USB device found, idVendor=04f2, idProduct=b1d6
[    2.909036] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.909038] usb 2-5: Product: CNF9055
[    2.909040] usb 2-5: Manufacturer: Sonix Technology Co., Ltd.
[    2.914737] usb 2-1: USB disconnect, device number 2
[    4.519090] PM: Starting manual resume from disk
[    4.519094] PM: Hibernation image partition 8:10 present
[    4.519096] PM: Looking for hibernation image.
[    4.519271] PM: Image not found (code -22)
[    4.519274] PM: Hibernation image not present or could not be loaded.
[    4.545315] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    5.884909] udevd[384]: starting version 175
[    6.192647] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    6.192654] ACPI: Power Button [PWRB]
[    6.192753] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    6.192848] ACPI: Lid Switch [LID]
[    6.192909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.192912] ACPI: Power Button [PWRF]
[    6.195957] ACPI: processor limited to max C-state 1
[    6.317411] ACPI: AC Adapter [ACAD] (on-line)
[    6.323544] acpi device:01: registered as cooling_device2
[    6.323625] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4
[    6.323632] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.402076] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000011) is beyond end of object (20110623/exoparg2-418)
[    6.402088] ACPI Error: Method parse/execution failed [\_SB_.BAT1.UBIX] (Node ffff88010b29a3a8), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[    6.402097] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BIX] (Node ffff88010b29a420), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[    6.402106] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _BIX (20110623/battery-434)
[    6.548119] powernow-k8: Found 1 AMD Turion(tm) II P520 Dual-Core Processor (2 cpu cores) (version 2.20.00)
[    6.548164] powernow-k8:    0 : pstate 0 (2300 MHz)
[    6.548166] powernow-k8:    1 : pstate 1 (2100 MHz)
[    6.548168] powernow-k8:    2 : pstate 2 (1800 MHz)
[    6.548170] powernow-k8:    3 : pstate 3 (1500 MHz)
[    6.548172] powernow-k8:    4 : pstate 4 (800 MHz)
[    6.603388] wmi: Mapper loaded
[    6.633629] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.653780] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.728640] EDAC MC: Ver: 2.1.0
[    6.748776] MCE: In-kernel MCE decoding enabled.
[    6.806278] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[    6.875098] AMD64 EDAC driver v3.4.0
[    6.942611] Error: Driver 'pcspkr' is already registered, aborting...
[    6.956124] Linux media interface: v0.10
[    6.974356] Linux video capture interface: v2.00
[    7.012384] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[    7.022948] input: CNF9055 as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input6
[    7.023152] usbcore: registered new interface driver uvcvideo
[    7.023158] USB Video Class driver (1.1.1)
[    7.035032] hda_codec: CX20585: BIOS auto-probing.
[    7.036103] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7
[    7.038916] EDAC amd64: DRAM ECC disabled.
[    7.038929] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    7.038933]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    7.038937]  (Note that use of the override may cause unknown side effects.)
[    7.040353] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    7.086526] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    7.086725] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[    7.115592] [drm] Initialized drm 1.1.0 20060810
[    7.146537] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[    7.147214] input: Toshiba input device as /devices/virtual/input/input8
[    7.162288] Registered led device: toshiba::illumination
[    7.227738] [drm] radeon defaulting to kernel modesetting.
[    7.227741] [drm] radeon kernel modesetting enabled.
[    7.252257] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.
[    7.265542] cfg80211: Calling CRDA to update world regulatory domain
[    7.393597] rtl8192se 0000:02:00.0: setting latency timer to 64
[    7.418053] rtl8192se: rtl8192ce: FW Power Save off (module option)
[    7.418226] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[    7.418229] Loading firmware rtlwifi/rtl8192sefw.bin
[    7.511816] rtl8192se 0000:02:00.0: firmware: agent loaded rtlwifi/rtl8192sefw.bin into memory
[    7.551257] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    7.723724] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[    7.723743] psmouse serio4: synaptics: Toshiba Satellite L645D detected, limiting rate to 40pps.
[    7.762762] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[    9.715187] Adding 2097148k swap on /dev/sda10.  Priority:-1 extents:1 across:2097148k 
[    9.752834] EXT4-fs (sda9): re-mounted. Opts: (null)
[   10.183413] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[   10.297204] loop: module loaded
[   11.612928] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[   11.645225] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
[   12.650939] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.796653] wlan0: authenticate with 00:19:ed:f3:1d:47 (try 1)
[   13.798497] wlan0: authenticated
[   13.818821] wlan0: associate with 00:19:ed:f3:1d:47 (try 1)
[   13.822323] wlan0: RX AssocResp from 00:19:ed:f3:1d:47 (capab=0x411 status=0 aid=1)
[   13.822334] wlan0: associated
[   13.835164] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   22.591041] RPC: Registered named UNIX socket transport module.
[   22.591050] RPC: Registered udp transport module.
[   22.591056] RPC: Registered tcp transport module.
[   22.591061] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   22.646070] FS-Cache: Loaded
[   22.703619] FS-Cache: Netfs 'nfs' registered for caching
[   22.723295] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   24.680146] wlan0: no IPv6 routers present
[   24.754851] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[   25.768575] Bluetooth: Core ver 2.16
[   25.768621] NET: Registered protocol family 31
[   25.768628] Bluetooth: HCI device and connection manager initialized
[   25.768636] Bluetooth: HCI socket layer initialized
[   25.768641] Bluetooth: L2CAP socket layer initialized
[   25.768653] Bluetooth: SCO socket layer initialized
[   25.802427] Bluetooth: RFCOMM TTY layer initialized
[   25.802439] Bluetooth: RFCOMM socket layer initialized
[   25.802445] Bluetooth: RFCOMM ver 1.11
[   25.853589] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.853597] Bluetooth: BNEP filters: protocol multicast
[   25.944508] lp: driver loaded but no devices found
[   25.996407] ppdev: user-space parallel port driver
[  269.536225] usb 4-1: new low-speed USB device number 2 using ohci_hcd
[  269.703378] usb 4-1: New USB device found, idVendor=093a, idProduct=2510
[  269.703390] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  269.703398] usb 4-1: Product: USB Optical Mouse
[  269.703404] usb 4-1: Manufacturer: PixArt
[  270.070855] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input11
[  270.071431] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-1/input0
[  270.071476] usbcore: registered new interface driver usbhid
[  270.071482] usbhid: USB HID core driver
[  330.104673] usb 4-1: USB disconnect, device number 2
[  331.664217] usb 4-1: new low-speed USB device number 3 using ohci_hcd
[  331.831645] usb 4-1: New USB device found, idVendor=093a, idProduct=2510
[  331.831657] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  331.831665] usb 4-1: Product: USB Optical Mouse
[  331.831671] usb 4-1: Manufacturer: PixArt
[  331.839112] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input12
[  331.839423] generic-usb 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-1/input0

Offline

#13 2014-05-01 00:59:01

thomsson - Dyskutant

thomsson: Dyskutant; Zarejestrowany: 2011-10-26

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

[quote=yossarian]@thomsson:
[quote=Madras]Mam problem ze skopiowaniem treści z konsoli tty.[/quote]
[/quote]
Czytałem wybiórczo, mea culpa

ilin napisał
[i]"DUG to tez moja mała ojczyzna"[/i]

Offline

#14 2014-05-01 11:56:39

Madras - Użytkownik

Madras: Użytkownik; Zarejestrowany: 2014-04-30

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Nie wiem jak to się stało, ale wczoraj gdy wgrałem firmware, Debian uzyskał nagle połączenie z siecią. Ciekawe jest to, iż przy wgrywaniu tego oprogramowania, wyskakiwał mi jakiś błąd... Zresztą za bardzo się nie znam, ale przy tej komendzie 'dmesg' widzę, że przy mojej karcie sieciowej znajdują się sterowniki i całe te oprogramowanie. Nie wiem, ale zrobię dzisiaj chyba reinstalkę systemu, gdyż nie wiem, w którym momencie naprawiło się połączenie sieciowe..

Offline

#15 2014-05-01 12:02:09

ilin - Palacz

ilin: Palacz; Skąd: PRLu; Zarejestrowany: 2006-05-03

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

[quote=Madras]Nie wiem, ale zrobię dzisiaj chyba reinstalkę systemu, gdyż nie wiem, w którym momencie naprawiło się połączenie sieciowe.[/quote]
W momencie załadowania firmware.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

#16 2014-05-01 13:57:51

Madras - Użytkownik

Madras: Użytkownik; Zarejestrowany: 2014-04-30

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

No to chyba zrozumiałem. Jeszcze po drodze zrobiłem według tego poradnika: [url]https://wiki.debian.org/WiFi/HowToUse#WPA-PSK_and_WPA2-PSK[/url] . Wcześniej znalazłem poradnik, jak zainstalować stery pod moją kartę sieciową, aczkolwiek tam ukazano kompilację ich ze źródeł [url]http://www.chalapuk.pl/2010/05/jak-zainstalowac-debiana-6-na-netbooku/#Karta_Wi-Fi[/url]. Rozumiem, że to był stary wpis i już pojawiło się oprogramowanie w repo, dzięki któremu ominął mnie ten męczący etap? A co do tego firmware, to tutaj znalazłem także sposób na ich instalację [url]https://wiki.debian.org/rtl819x#Debian_7_.22Wheezy.22[/url], tyle, że wtedy nie wiedziałem w jaki sposób zainstalować dany pakiet przy braku dostępu do sieci. Co do ostatniego linku, to ukazana dalsza część ręcznej instalacji odnosi się jedynie do modelu RTL8192U, która mnie nie obowiązuje?:)

Offline

#17 2014-05-01 17:28:29

yossarian - Szczawiożerca

yossarian: Szczawiożerca; Skąd: Shangri-La; Zarejestrowany: 2011-04-25

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Korzystaj z oficjalnej dokumentacji, a nie z jakichś dziwnych blogów (szczególnie muzealnych).

Wszystko miałeś precyzyjnie opisane:
Twoja karta:

[b]rtl8192se[/b]

The page HowToIdentifyADevice/PCI explains how to identify a PCI device.

The following list is based on the alias fields of modinfo rtl8192se in Debian 3.2.0 (3.2.41-2) kernel images.
Kod:
    PCI: 10EC:8171 Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller
    PCI: 10EC:8172 Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller
    PCI: 10EC:8173 Realtek Semiconductor Co., Ltd. RTL8192SE Wireless LAN Controller
    PCI: 10EC:8174 Realtek Semiconductor Co., Ltd. RTL8192SE Wireless LAN Controller
    PCI: 10EC:8192 Realtek Semiconductor Co., Ltd. RTL8192E/RTL8192SE Wireless LAN Controller
[/quote]
https://wiki.debian.org/rtl819x#rtl8192se

Sposób instalacji:
Add a "non-free" component to /etc/apt/sources.list, for example:
Kod:
# Debian 7 "Wheezy"
deb http://http.debian.net/debian/ wheezy main contrib non-free
Update the list of available packages and install the firmware-realtek package:
Kod:
# apt-get update && apt-get install firmware-realtek
[/quote]
https://wiki.debian.org/rtl819x#Debian_7_.22Wheezy.22

I podany był jeszcze odnośnik do konfiguracji:
https://wiki.debian.org/WiFi/HowToUse

Jeżeli nie ma dostępu do sieci, to instaluje się pakiet lokalnie lub podrzuca ręcznie samo firmware (rtlwifi/rtl8192sefw.bin) do /lib/firmware

Można od razu pobrać obraz płyty z wbudowanym firmware:
http://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/

Tu możesz poczytać więcej:
http://dug.net.pl/tekst/200/pobieranie_obrazow_instalacyjnych_debiana
Offline

#18 2014-05-01 20:51:03

Madras - Użytkownik

Madras: Użytkownik; Zarejestrowany: 2014-04-30

Re: Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Dzięki za pomoc oraz wyczerpujące podsumowanie wątku ;) Teraz wszystko widać jak na dłoni.

[quote=yossarian]Jeżeli nie ma dostępu do sieci, to instaluje się pakiet lokalnie lub podrzuca ręcznie samo firmware (rtlwifi/rtl8192sefw.bin) do /lib/firmware[/quote]
Tego niestety nie wiedziałem.
Reasumując wirtualna maszyna to nie to samo co fizyczny dysk, więc nieco byłem tam "rozpieszczany" obsługą systemu. Ale nauka nie idzie w las, stąd przez ostatnie 2 dni nauczyłem się więcej niż wcześniej przez miesiąc pod Debianem, czy pół roku w wypadku Ubuntu . Jeszcze raz dziękuje i pozdrawiam :)

Ostatnio edytowany przez Madras (2014-05-01 20:58:54)

Offline

Strony: 1

Forum Debian Users Gang
» Instalacja i podstawowa konfiguracja
» Brak połączenia z siecią wifi po instalacji Debiana z netinstall.

Stopka forum

[ Generated in 0.012 seconds, 11 queries executed ]

Informacje debugowania

Time (s)	Query
0.00008	SET CHARSET latin2
0.00005	SET NAMES latin2
0.00111	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.220.97.161' WHERE u.id=1
0.00073	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.220.97.161', 1732308594)
0.00052	SELECT * FROM punbb_online WHERE logged<1732308294
0.00075	SELECT topic_id FROM punbb_posts WHERE id=265368
0.00005	SELECT id FROM punbb_posts WHERE topic_id=25720 ORDER BY posted
0.00075	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=25720 AND t.moved_to IS NULL
0.00005	SELECT search_for, replace_with FROM punbb_censoring
0.00403	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=25720 ORDER BY p.id LIMIT 0,25
0.00083	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=25720
Total query time: 0.00895 s