Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2014-05-14 19:18:58

  vnu007dl - Użytkownik

vnu007dl
Użytkownik
Zarejestrowany: 2010-11-01

jak odzyskać dane z uszkodzonej karty SD?

Hej

Mam problem. W smartfonie miałem kartę pamięci sd 32 GB, dokładniej to karta mikrosd firmy platinet. Wczoraj ni stąd ni z owąd na komórce pojawił się lakoniczny komunikat, że karta pamięci została odłączona. Niezrażony tym faktem po prostu wyciągnąłem kartę, włożyłem jeszcze raz restartując komórkę i myślałem że to po prostu jakiś błąd np styki karty nie dociskają itp, no ale to nie pomogło i kilkukrotne ponawianie tej operacji też nie.
Po powrocie do domu spróbowałem podpiąć kartę do kompa poprzez 2 adaptery jakie mam, jeden to taki formie pendriva pod usb a drugi w formie zwykłej karty SD ( mam do niej adapter na notebooku) Niestety dalej nic komp jej nie widzi ani pod linuksem ani pod windowsem. Co robić w takiej sytuacji? Czy karta jest popsuta? Tak po prostu by się uszkodziła? Telefon mi nawet nigdy  nie spadł na ziemię, leżał spokojnie na biurku gdy karta przestała działać. Co mogę zrobić? Próbowałem pod windą programikami Bad copy  pro i digital image recorvery i na adapterze usb wykrywa mi literę napędu, ale nie udało mi się odzyskać żadnych danych.Tak jakby adapter był pusty.

Proszę o pomoc.

Offline

 

#2  2014-05-14 20:38:30

  pink - Użytkownik

pink
Użytkownik
Skąd: P17PY93
Zarejestrowany: 2005-09-16
Serwis

Re: jak odzyskać dane z uszkodzonej karty SD?

mialem podobnie (tani sandisk) czesc danych odzyskalem bo sie dalo podmatowac ale ogolnie karta na smietnik.

TestDisk - iem sie odzyskuje w linux.

T430 think-box 4.9-custom x86_64 Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz GenuineIntel GNU/Linux
"Doktor plama i maharadża są pod złotym leszczem." "Człowieka od zwierzęcia odróżnia ciekawość świata. Patrze słucham i wyciągam wnioski."
http://przemyslawmamon.com/
https://www.behance.net/przemyslawmamon

Offline

 

#3  2014-05-14 21:11:53

  vnu007dl - Użytkownik

vnu007dl
Użytkownik
Zarejestrowany: 2010-11-01

Re: jak odzyskać dane z uszkodzonej karty SD?

Ok zainstalowałem testdisk wpiąłem kartę w przejściówkę usb, tylko, że testdisk mi jej w ogóle nie wykrywa. Czy da się ją jakoś zamontować żeby ją system widział? czy jest już tak skopana, że nic z tego?

Offline

 

#4  2014-05-14 21:27:35

  thomsson - Dyskutant

thomsson
Dyskutant
Zarejestrowany: 2011-10-26

Re: jak odzyskać dane z uszkodzonej karty SD?

Daj wyniki poleceń po jej włożeniu:

Kod:

dmesg
fdisk -l (z roota)
ilin napisał
[i]"DUG to tez moja mała ojczyzna"[/i]

Offline

 

#5  2014-05-15 20:57:03

  vnu007dl - Użytkownik

vnu007dl
Użytkownik
Zarejestrowany: 2010-11-01

Re: jak odzyskać dane z uszkodzonej karty SD?

Kod:

book:~$ sudo su
[sudo] password for darek: 
root@notebook:/home/darek# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006ff80000-0x000000006ff8dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006ff8e000-0x000000006ffcffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006ffd0000-0x000000006fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: ASUSTeK Computer INC. 1015T/1015T, BIOS 0304    09/30/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x6ff80 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0000FFF60000 mask FFFFFFFE0000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 6, base: 4193664KB, range: 128KB, type UC
[    0.000000] total RAM covered: 2048M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 64K         num_reg: 1      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01b88000, 0x01b88fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34e04000-0x366f9fff]
[    0.000000] ACPI: RSDP 000fbda0 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 6ff80100 00006C (v01 _ASUS_ Notebook 20100930 MSFT 00000097)
[    0.000000] ACPI: FACP 6ff80290 0000F4 (v03 093010 FACP1016 20100930 MSFT 00000097)
[    0.000000] ACPI: DSDT 6ff804a0 00885D (v01  A1694 A1694000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 6ff8e000 000040
[    0.000000] ACPI: APIC 6ff80390 00006C (v01 093010 APIC1016 20100930 MSFT 00000097)
[    0.000000] ACPI: MCFG 6ff80400 00003C (v01 093010 OEMMCFG  20100930 MSFT 00000097)
[    0.000000] ACPI: ECDT 6ff80440 000055 (v01 093010 OEMECDT  20100930 MSFT 00000097)
[    0.000000] ACPI: OEMB 6ff8e040 000072 (v01 093010 OEMB1016 20100930 MSFT 00000097)
[    0.000000] ACPI: HPET 6ff8a4a0 000038 (v01 093010 OEMHPET  20100930 MSFT 00000097)
[    0.000000] ACPI: RTCF 6ff8e0c0 0002EF (v01  A1234 RTCONFIG 00000001 INTL 20060113)
[    0.000000] ACPI: SLIC 6ff8a4e0 000176 (v01 _ASUS_ Notebook 20100930 MSFT 00000097)
[    0.000000] ACPI: SSDT 6ff8a660 000180 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 899MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01b89000, 0x01b89fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x6ff7ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x6ff7ffff]
[    0.000000] On node 0 totalpages: 458526
[    0.000000] free_area_init_node: node 0, pgdat c1990a80, node_mem_map f6dfe020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1800 pages used for memmap
[    0.000000]   HighMem zone: 230274 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[    0.000000] e820: [mem 0x70000000-0xffefffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f6dbd000 s36096 r0 d21248 u57344
[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 456742
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=4cd2f223-9d33-416f-9efe-b5817fb6b5f0 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 3668984 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0006ff80)
[    0.000000] Memory: 1777676K/1834104K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 56428K reserved, 921096K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19ae000 - 0xc1a88000   ( 872 kB)
[    0.000000]       .data : 0xc165b0b2 - 0xc19ad4c0   (3401 kB)
[    0.000000]       .text : 0xc1000000 - 0xc165b0b2   (6508 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f4808000 soft=f480a000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1196.878 MHz processor
[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.75 BogoMIPS (lpj=4787512)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000081] Security Framework initialized
[    0.000108] AppArmor: AppArmor initialized
[    0.000111] Yama: becoming mindful.
[    0.000214] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000219] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000604] Initializing cgroup subsys memory
[    0.000615] Initializing cgroup subsys devices
[    0.000619] Initializing cgroup subsys freezer
[    0.000623] Initializing cgroup subsys blkio
[    0.000627] Initializing cgroup subsys perf_event
[    0.000633] Initializing cgroup subsys hugetlb
[    0.000679] mce: CPU supports 6 MCE banks
[    0.000690] LVT offset 0 assigned for vector 0xf9
[    0.000697] process: using AMD E400 aware idle routine
[    0.000709] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.000709] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[    0.000709] tlb_flushall_shift: 4
[    0.018689] ACPI: Core revision 20131115
[    0.030531] ACPI: All ACPI Tables successfully acquired
[    0.209676] ftrace: allocating 27695 entries in 55 pages
[    0.229030] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.229424] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.269135] smpboot: CPU0: AMD V105 Processor (fam: 10, model: 06, stepping: 03)
[    0.379159] Performance Events: AMD PMU driver.
[    0.379167] ... version:                0
[    0.379169] ... bit width:              48
[    0.379171] ... generic registers:      4
[    0.379174] ... value mask:             0000ffffffffffff
[    0.379176] ... max period:             00007fffffffffff
[    0.379179] ... fixed-purpose events:   0
[    0.379181] ... event mask:             000000000000000f
[    0.382148] x86: Booted up 1 node, 1 CPUs
[    0.382154] smpboot: Total of 1 processors activated (2393.75 BogoMIPS)
[    0.382576] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.382742] devtmpfs: initialized
[    0.383015] EVM: security.selinux
[    0.383017] EVM: security.SMACK64
[    0.383020] EVM: security.ima
[    0.383022] EVM: security.capability
[    0.383137] PM: Registering ACPI NVS region [mem 0x6ff8e000-0x6ffcffff] (270336 bytes)
[    0.385163] pinctrl core: initialized pinctrl subsystem
[    0.385276] regulator-dummy: no parameters
[    0.385316] RTC time: 20:46:09, date: 05/15/14
[    0.385382] NET: Registered protocol family 16
[    0.385594] EISA bus registered
[    0.385597] cpuidle: using governor ladder
[    0.385600] cpuidle: using governor menu
[    0.385608] node 0 link 0: io port [1000, ffffff]
[    0.385613] TOM: 0000000080000000 aka 2048M
[    0.385618] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.385623] node 0 link 0: mmio [80000000, cfffffff]
[    0.385628] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[    0.385633] node 0 link 0: mmio [f0000000, fbbfffff]
[    0.385637] node 0 link 0: mmio [fbc00000, fbdfffff]
[    0.385641] node 0 link 0: mmio [fbe00000, ffefffff]
[    0.385645] bus: [bus 00-1f] on node 0 link 0
[    0.385648] bus: 00 [io  0x0000-0xffff]
[    0.385651] bus: 00 [mem 0x80000000-0xdfffffff]
[    0.385654] bus: 00 [mem 0xf0000000-0xfcffffffff]
[    0.385765] ACPI: bus type PCI registered
[    0.385768] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.385880] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.385885] PCI: not using MMCONFIG
[    0.386833] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.386921] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.386923] PCI: Using configuration type 1 for base access
[    0.386925] PCI: Using configuration type 1 for extended access
[    0.388642] bio: create slab <bio-0> at 0
[    0.388871] ACPI: Added _OSI(Module Device)
[    0.388874] ACPI: Added _OSI(Processor Device)
[    0.388876] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.388879] ACPI: Added _OSI(Processor Aggregator Device)
[    0.390487] ACPI : EC: EC description table is found, configuring boot EC
[    0.392902] ACPI: Executed 3 blocks of module-level executable AML code
[    0.397695] ACPI: Interpreter enabled
[    0.397719] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.397728] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.397756] ACPI: (supports S0 S3 S4 S5)
[    0.397759] ACPI: Using IOAPIC for interrupt routing
[    0.397808] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.399043] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.399046] PCI: Using MMCONFIG for extended config space
[    0.399072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.399333] ACPI: No dock devices found.
[    0.407607] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.409527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.409537] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.409546] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.410143] PCI host bridge to bus 0000:00
[    0.410148] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.410153] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.410157] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.410161] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.410165] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.410169] pci_bus 0000:00: root bus resource [mem 0x70000000-0xdfffffff]
[    0.410173] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.410193] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[    0.410375] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
[    0.410532] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[    0.410590] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.410671] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.410725] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[    0.410782] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.410860] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.410938] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.410965] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.410979] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.410992] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.411005] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.411019] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.411033] pci 0000:00:11.0: reg 0x24: [mem 0xfbbffc00-0xfbbfffff]
[    0.411201] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.411220] pci 0000:00:12.0: reg 0x10: [mem 0xfbbfe000-0xfbbfefff]
[    0.411394] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.411413] pci 0000:00:12.1: reg 0x10: [mem 0xfbbfd000-0xfbbfdfff]
[    0.411596] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.411622] pci 0000:00:12.2: reg 0x10: [mem 0xfbbff800-0xfbbff8ff]
[    0.411727] pci 0000:00:12.2: supports D1 D2
[    0.411730] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.411865] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.411884] pci 0000:00:13.0: reg 0x10: [mem 0xfbbfc000-0xfbbfcfff]
[    0.412066] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.412086] pci 0000:00:13.1: reg 0x10: [mem 0xfbbfb000-0xfbbfbfff]
[    0.412263] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.412289] pci 0000:00:13.2: reg 0x10: [mem 0xfbbff400-0xfbbff4ff]
[    0.412394] pci 0000:00:13.2: supports D1 D2
[    0.412397] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.412530] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.412758] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.412781] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.412794] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.412808] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.412821] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.412834] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.413000] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.413030] pci 0000:00:14.2: reg 0x10: [mem 0xfbbf4000-0xfbbf7fff 64bit]
[    0.413114] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.413190] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.413241] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.413427] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.413539] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.413589] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.413608] pci 0000:00:14.5: reg 0x10: [mem 0xfbbfa000-0xfbbfafff]
[    0.413788] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.413910] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.414027] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.414142] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.414265] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.414455] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[    0.414470] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.414478] pci 0000:01:05.0: reg 0x14: [io  0xd000-0xd0ff]
[    0.414487] pci 0000:01:05.0: reg 0x18: [mem 0xfbdf0000-0xfbdfffff]
[    0.414504] pci 0000:01:05.0: reg 0x24: [mem 0xfbc00000-0xfbcfffff]
[    0.414533] pci 0000:01:05.0: supports D1 D2
[    0.414592] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[    0.414606] pci 0000:01:05.1: reg 0x10: [mem 0xfbde8000-0xfbdebfff]
[    0.414656] pci 0000:01:05.1: supports D1 D2
[    0.414739] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.414746] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.414751] pci 0000:00:01.0:   bridge window [mem 0xfbc00000-0xfbdfffff]
[    0.414758] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.414836] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.414860] pci 0000:02:00.0: reg 0x10: [mem 0xfbef0000-0xfbefffff 64bit]
[    0.414957] pci 0000:02:00.0: supports D1
[    0.414960] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.415058] process: System has AMD C1E enabled
[    0.415070] process: Switch to broadcast mode on CPU0
[    0.423140] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.423154] pci 0000:00:04.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.423310] pci 0000:03:00.0: [1969:2062] type 00 class 0x020000
[    0.423347] pci 0000:03:00.0: reg 0x10: [mem 0xfbfc0000-0xfbffffff 64bit]
[    0.423366] pci 0000:03:00.0: reg 0x18: [io  0xec00-0xec7f]
[    0.423487] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.423534] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.431147] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.431160] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.431166] pci 0000:00:05.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.431300] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.431313] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.431318] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.431322] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.431326] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.431330] pci 0000:00:14.4:   bridge window [mem 0x70000000-0xdfffffff] (subtractive decode)
[    0.431334] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.431362] pci_bus 0000:00: on NUMA node 0
[    0.432156] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[    0.432238] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[    0.432314] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 12 14 15)
[    0.432387] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[    0.432463] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.432539] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.432613] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 7 10 11 12 14 15)
[    0.432688] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.432919] ACPI: \_SB_.PCI0: notify handler is installed
[    0.433002] Found 1 acpi root devices
[    0.433097] ACPI : EC: GPE = 0xe, I/O: command/status = 0x66, data = 0x62
[    0.433268] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.433272] vgaarb: loaded
[    0.433274] vgaarb: bridge control possible 0000:01:05.0
[    0.433605] SCSI subsystem initialized
[    0.433673] libata version 3.00 loaded.
[    0.433709] ACPI: bus type USB registered
[    0.433741] usbcore: registered new interface driver usbfs
[    0.433759] usbcore: registered new interface driver hub
[    0.433797] usbcore: registered new device driver usb
[    0.433958] PCI: Using ACPI for IRQ routing
[    0.433963] PCI: pci_cache_line_size set to 64 bytes
[    0.434053] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.434057] e820: reserve RAM buffer [mem 0x6ff80000-0x6fffffff]
[    0.434199] NetLabel: Initializing
[    0.434202] NetLabel:  domain hash size = 128
[    0.434204] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.434223] NetLabel:  unlabeled traffic allowed by default
[    0.434373] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.434380] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.436457] Switched to clocksource hpet
[    0.445299] AppArmor: AppArmor Filesystem Enabled
[    0.445349] pnp: PnP ACPI init
[    0.445373] ACPI: bus type PNP registered
[    0.445666] system 00:00: [mem 0x70000000-0x7fffffff] has been reserved
[    0.445674] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.445753] pnp 00:01: [dma 4]
[    0.445789] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.445845] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.445930] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.446030] pnp 00:04: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[    0.446069] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.446115] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.446198] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.446557] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.446563] system 00:08: [io  0x040b] has been reserved
[    0.446567] system 00:08: [io  0x04d6] has been reserved
[    0.446572] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.446577] system 00:08: [io  0x0c14] has been reserved
[    0.446582] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.446586] system 00:08: [io  0x0c52] has been reserved
[    0.446590] system 00:08: [io  0x0c6c] has been reserved
[    0.446595] system 00:08: [io  0x0c6f] has been reserved
[    0.446600] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.446604] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.446609] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.446614] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.446618] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.446623] system 00:08: [io  0x0800-0x089f] could not be reserved
[    0.446628] system 00:08: [io  0x0b00-0x0b0f] has been reserved
[    0.446633] system 00:08: [io  0x0b20-0x0b3f] has been reserved
[    0.446638] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.446642] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.446647] system 00:08: [io  0xfd60-0xfd6f] has been reserved
[    0.446652] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.446657] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.446662] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.446667] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.446837] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.446842] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.446847] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.446945] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.446950] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.447310] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.447316] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.447321] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.447325] system 00:0b: [mem 0x00100000-0x6fffffff] could not be reserved
[    0.447330] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.447335] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.447551] pnp: PnP ACPI: found 12 devices
[    0.447554] ACPI: bus type PNP unregistered
[    0.447559] PnPBIOS: Disabled by ACPI PNP
[    0.484258] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.484265] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.484272] pci 0000:00:01.0:   bridge window [mem 0xfbc00000-0xfbdfffff]
[    0.484278] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.484285] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.484291] pci 0000:00:04.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.484298] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.484303] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.484309] pci 0000:00:05.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.484316] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.484333] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.484337] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.484342] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.484346] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.484350] pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff]
[    0.484354] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.484358] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.484362] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbdfffff]
[    0.484367] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.484371] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.484375] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.484379] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.484384] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.484388] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.484393] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.484397] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.484401] pci_bus 0000:04: resource 8 [mem 0x70000000-0xdfffffff]
[    0.484405] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.484463] NET: Registered protocol family 2
[    0.484748] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.484785] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.484843] TCP: Hash tables configured (established 8192 bind 8192)
[    0.484883] TCP: reno registered
[    0.484887] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.484902] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.484993] NET: Registered protocol family 1
[    0.485010] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    1.553391] pci 0000:01:05.0: Boot video device
[    1.553425] PCI: CLS 64 bytes, default 64
[    1.553509] Trying to unpack rootfs image as initramfs...
[    2.531385] Freeing initrd memory: 25560K (f4e04000 - f66fa000)
[    2.531613] LVT offset 1 assigned for vector 0x400
[    2.531629] IBS: LVT offset 1 assigned
[    2.531663] perf: AMD IBS detected (0x0000001f)
[    2.531743] microcode: CPU0: patch_level=0x010000c8
[    2.531813] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.531816] Scanning for low memory corruption every 60 seconds
[    2.532215] Initialise system trusted keyring
[    2.532290] audit: initializing netlink socket (disabled)
[    2.532309] type=2000 audit(1400186770.236:1): initialized
[    2.580251] bounce pool size: 64 pages
[    2.580268] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.582404] VFS: Disk quotas dquot_6.5.2
[    2.582484] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.583226] fuse init (API version 7.22)
[    2.583346] msgmni has been set to 1722
[    2.583446] Key type big_key registered
[    2.583807] Key type asymmetric registered
[    2.583810] Asymmetric key parser 'x509' registered
[    2.583864] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.583906] io scheduler noop registered
[    2.583910] io scheduler deadline registered (default)
[    2.583955] io scheduler cfq registered
[    2.584345] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    2.584579] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    2.584674] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.584700] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.584775] vesafb: mode is 1024x600x32, linelength=4096, pages=0
[    2.584777] vesafb: scrolling: redraw
[    2.584781] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    2.585038] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 2432k, total 2432k
[    2.726314] Console: switching to colour frame buffer device 128x37
[    2.865798] fb0: VESA VGA frame buffer device
[    2.865886] ipmi message handler version 39.2
[    2.866028] ACPI: AC Adapter [AC0] (off-line)
[    2.866175] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    2.870832] ACPI: Lid Switch [LID]
[    2.870932] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    2.870939] ACPI: Sleep Button [SLPB]
[    2.870995] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    2.870999] ACPI: Power Button [PWRB]
[    2.871059] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.871063] ACPI: Power Button [PWRF]
[    2.871126] ACPI: processor limited to max C-state 1
[    2.886297] thermal LNXTHERM:00: registered as thermal_zone0
[    2.886304] ACPI: Thermal Zone [TZ00] (37 C)
[    2.886524] GHES: HEST is not enabled!
[    2.886720] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.888761] Linux agpgart interface v0.103
[    2.890242] isapnp: Scanning for PnP cards...
[    2.896858] brd: module loaded
[    2.897974] loop: module loaded
[    2.898690] libphy: Fixed MDIO Bus: probed
[    2.898861] tun: Universal TUN/TAP device driver, 1.6
[    2.898864] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.942678] PPP generic driver version 2.4.2
[    2.942735] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.942741] ehci-pci: EHCI PCI platform driver
[    2.942978] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.942988] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.942997] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.943012] ehci-pci 0000:00:12.2: debug port 1
[    2.943078] ehci-pci 0000:00:12.2: irq 17, io mem 0xfbbff800
[    2.986740] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.986889] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.986894] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.986897] usb usb1: Product: EHCI Host Controller
[    2.986901] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    2.986904] usb usb1: SerialNumber: 0000:00:12.2
[    2.987066] hub 1-0:1.0: USB hub found
[    2.987080] hub 1-0:1.0: 6 ports detected
[    2.987660] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.987669] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.987675] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.987689] ehci-pci 0000:00:13.2: debug port 1
[    2.987747] ehci-pci 0000:00:13.2: irq 19, io mem 0xfbbff400
[    3.031402] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.075194] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.075198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.075202] usb usb2: Product: EHCI Host Controller
[    3.075205] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    3.075209] usb usb2: SerialNumber: 0000:00:13.2
[    3.075353] hub 2-0:1.0: USB hub found
[    3.075363] hub 2-0:1.0: 6 ports detected
[    3.075722] ehci-platform: EHCI generic platform driver
[    3.075740] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.075742] ohci-pci: OHCI PCI platform driver
[    3.075954] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    3.075962] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    3.075996] ohci-pci 0000:00:12.0: irq 16, io mem 0xfbbfe000
[    3.210928] isapnp: No Plug & Play device found
[    3.211013] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.211017] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.211021] usb usb3: Product: OHCI PCI host controller
[    3.211024] usb usb3: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    3.211028] usb usb3: SerialNumber: 0000:00:12.0
[    3.211172] hub 3-0:1.0: USB hub found
[    3.211186] hub 3-0:1.0: 3 ports detected
[    3.211550] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    3.211559] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    3.211578] ohci-pci 0000:00:12.1: irq 16, io mem 0xfbbfd000
[    3.270459] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.270468] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.270472] usb usb4: Product: OHCI PCI host controller
[    3.270476] usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    3.270479] usb usb4: SerialNumber: 0000:00:12.1
[    3.270682] hub 4-0:1.0: USB hub found
[    3.270699] hub 4-0:1.0: 3 ports detected
[    3.271140] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    3.271149] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    3.271187] ohci-pci 0000:00:13.0: irq 18, io mem 0xfbbfc000
[    3.280339] ACPI: Battery Slot [BAT0] (battery present)
[    3.330245] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    3.330309] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.330314] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.330318] usb usb5: Product: OHCI PCI host controller
[    3.330321] usb usb5: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    3.330325] usb usb5: SerialNumber: 0000:00:13.0
[    3.330551] hub 5-0:1.0: USB hub found
[    3.330565] hub 5-0:1.0: 3 ports detected
[    3.330988] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    3.330997] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    3.331020] ohci-pci 0000:00:13.1: irq 18, io mem 0xfbbfb000
[    3.390372] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.390379] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.390383] usb usb6: Product: OHCI PCI host controller
[    3.390387] usb usb6: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    3.390390] usb usb6: SerialNumber: 0000:00:13.1
[    3.390589] hub 6-0:1.0: USB hub found
[    3.390605] hub 6-0:1.0: 3 ports detected
[    3.391029] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    3.391039] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    3.391064] ohci-pci 0000:00:14.5: irq 18, io mem 0xfbbfa000
[    3.450354] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.450361] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.450365] usb usb7: Product: OHCI PCI host controller
[    3.450369] usb usb7: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    3.450372] usb usb7: SerialNumber: 0000:00:14.5
[    3.450574] hub 7-0:1.0: USB hub found
[    3.450588] hub 7-0:1.0: 2 ports detected
[    3.450753] ohci-platform: OHCI generic platform driver
[    3.450772] uhci_hcd: USB Universal Host Controller Interface driver
[    3.450897] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.473933] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.473947] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.474119] mousedev: PS/2 mouse device common for all mice
[    3.475209] rtc_cmos 00:02: RTC can wake from S4
[    3.475358] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    3.475391] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.475505] device-mapper: uevent: version 1.0.3
[    3.475592] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    3.475621] platform eisa.0: Probing EISA bus 0
[    3.475627] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    3.475631] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.475635] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.475638] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.475642] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.475645] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.475649] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.475653] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.475656] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.475660] platform eisa.0: EISA: Detected 0 cards
[    3.475670] cpufreq-nforce2: No nForce2 chipset.
[    3.475676] ledtrig-cpu: registered to indicate activity on CPUs
[    3.475939] TCP: cubic registered
[    3.476086] usb 1-4: New USB device found, idVendor=aaaa, idProduct=8815
[    3.476090] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.476094] usb 1-4: Product: MXT USB Device
[    3.476097] usb 1-4: Manufacturer: MXTvonics
[    3.476100] usb 1-4: SerialNumber: 110712v03
[    3.476226] NET: Registered protocol family 10
[    3.476741] NET: Registered protocol family 17
[    3.476757] Key type dns_resolver registered
[    3.476959] Using IPI No-Shortcut mode
[    3.477060] Loading compiled-in X.509 certificates
[    3.484150] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
[    3.484168] registered taskstats version 1
[    3.487710] Key type trusted registered
[    3.490945] Key type encrypted registered
[    3.494073] AppArmor: AppArmor sha1 policy hashing enabled
[    3.494080] IMA: No TPM chip found, activating TPM-bypass!
[    3.494508] regulator-dummy: disabling
[    3.494573]   Magic number: 14:478:801
[    3.494719] rtc_cmos 00:02: setting system clock to 2014-05-15 20:46:12 UTC (1400186772)
[    3.495129] acpi-cpufreq: overriding BIOS provided _PSD data
[    3.495474] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.495476] EDD information not available.
[    3.495523] PM: Hibernation image not present or could not be loaded.
[    3.496106] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[    3.496174] Write protecting the kernel text: 6512k
[    3.496286] Write protecting the kernel read-only data: 2756k
[    3.496288] NX-protecting the kernel data: 5776k
[    3.512601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.530116] systemd-udevd[92]: starting version 204
[    3.532408] tsc: Refined TSC clocksource calibration: 1196.960 MHz
[    3.581363] wmi: Mapper loaded
[    3.586380] usb 2-3: new high-speed USB device number 2 using ehci-pci
[    3.595954] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.710342] acpi device:05: registered as cooling_device1
[    3.712273] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input6
[    3.713818] usb-storage 1-4:1.0: USB Mass Storage device detected
[    3.721543] scsi0 : usb-storage 1-4:1.0
[    3.721698] usbcore: registered new interface driver usb-storage
[    3.734531] scsi1 : pata_atiixp
[    3.748622] scsi2 : pata_atiixp
[    3.748700] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    3.748705] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    3.749467] [drm] Initialized drm 1.1.0 20060810
[    3.763823] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[    3.770031] ahci 0000:00:11.0: version 3.0
[    3.770400] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    3.770464] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    3.797660] scsi3 : ahci
[    3.801189] scsi4 : ahci
[    3.804509] scsi5 : ahci
[    3.807849] scsi6 : ahci
[    3.807943] ata3: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffd00 irq 22
[    3.807949] ata4: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffd80 irq 22
[    3.807954] ata5: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffe00 irq 22
[    3.807959] ata6: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffe80 irq 22
[    3.997961] [drm] radeon kernel modesetting enabled.
[    3.998101] checking generic (d0000000 260000) vs hw (d0000000 10000000)
[    3.998105] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    3.998135] Console: switching to colour dummy device 80x25
[    3.999121] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x1043:0x1B62).
[    3.999147] [drm] register mmio base: 0xFBDF0000
[    3.999150] [drm] register mmio size: 65536
[    4.000888] ATOM BIOS: Asus_F50N
[    4.000929] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[    4.000934] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[    4.000941] [drm] Detected VRAM RAM=256M, BAR=256M
[    4.000944] [drm] RAM width 32bits DDR
[    4.001027] [TTM] Zone  kernel: Available graphics memory: 441506 kiB
[    4.001029] [TTM] Zone highmem: Available graphics memory: 902054 kiB
[    4.001032] [TTM] Initializing pool allocator
[    4.001039] [TTM] Initializing DMA pool allocator
[    4.001070] [drm] radeon: 256M of VRAM memory ready
[    4.001073] [drm] radeon: 512M of GTT memory ready.
[    4.001086] [drm] Loading RS780 Microcode
[    4.001191] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    4.017540] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[    4.017639] radeon 0000:01:05.0: WB enabled
[    4.017645] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xf62c0c00
[    4.017650] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xf62c0c0c
[    4.017654] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.017656] [drm] Driver supports precise vblank timestamp query.
[    4.017677] [drm] radeon: irq initialized.
[    4.050504] [drm] ring test on 0 succeeded in 0 usecs
[    4.050574] [drm] ring test on 3 succeeded in 1 usecs
[    4.050762] [drm] Enabling audio 0 support
[    4.050786] [drm] ib test on ring 0 succeeded in 0 usecs
[    4.050809] [drm] ib test on ring 3 succeeded in 0 usecs
[    4.051671] [drm] Radeon Display Connectors
[    4.051674] [drm] Connector 0:
[    4.051676] [drm]   VGA-1
[    4.051680] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    4.051682] [drm]   Encoders:
[    4.051684] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    4.051687] [drm] Connector 1:
[    4.051689] [drm]   LVDS-1
[    4.051692] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    4.051694] [drm]   Encoders:
[    4.051696] [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[    4.051698] [drm] Connector 2:
[    4.051700] [drm]   HDMI-A-1
[    4.051702] [drm]   HPD1
[    4.051706] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    4.051708] [drm]   Encoders:
[    4.051710] [drm]     DFP1: INTERNAL_UNIPHY
[    4.051857] [drm] radeon: power management initialized
[    4.154722] ata5: SATA link down (SStatus 0 SControl 300)
[    4.154776] ata4: SATA link down (SStatus 0 SControl 300)
[    4.154813] ata6: SATA link down (SStatus 0 SControl 300)
[    4.326806] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.328022] ata3.00: ATA-8: WDC WD2500BEVT-80A23T0, 01.01A01, max UDMA/133
[    4.328030] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.329342] ata3.00: configured for UDMA/133
[    4.329539] scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-8 01.0 PQ: 0 ANSI: 5
[    4.329813] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    4.329887] sd 3:0:0:0: [sda] Write Protect is off
[    4.329891] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.329923] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.330237] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    4.403509]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    4.404205] sd 3:0:0:0: [sda] Attached SCSI disk
[    4.531049] Switched to clocksource tsc
[    4.672204] usb 2-3: New USB device found, idVendor=13d3, idProduct=5702
[    4.672212] usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.672217] usb 2-3: Product: USB2.0 UVC VGA WebCam
[    4.672221] usb 2-3: Manufacturer: Azurewave
[    4.672224] usb 2-3: SerialNumber: 200901010001
[    4.719728] scsi 0:0:0:0: Direct-Access     MXT-USB  Storage Device   1109 PQ: 0 ANSI: 0 CCS
[    4.720162] sd 0:0:0:0: Attached scsi generic sg1 type 0
[    4.722172] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[    5.037051] [drm] fb mappable at 0xD0141000
[    5.037057] [drm] vram apper at 0xD0000000
[    5.037060] [drm] size 2457600
[    5.037063] [drm] fb depth is 24
[    5.037065] [drm]    pitch is 4096
[    5.037271] fbcon: radeondrmfb (fb0) is primary device
[    5.083284] Console: switching to colour frame buffer device 128x37
[    5.092284] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    5.092288] radeon 0000:01:05.0: registered panic notifier
[    5.092376] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0
[    7.334418] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    8.031866] random: init urandom read with 126 bits of entropy available
[    8.119593] random: nonblocking pool is initialized
[   15.125348] Adding 487420k swap on /dev/sda5.  Priority:-1 extents:1 across:487420k FS
[   15.220604] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.507114] systemd-udevd[296]: starting version 204
[   15.699214] lp: driver loaded but no devices found
[   15.748562] ppdev: user-space parallel port driver
[   16.320415] type=1400 audit(1400179585.312:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=349 comm="apparmor_parser"
[   16.320430] type=1400 audit(1400179585.312:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
[   16.320439] type=1400 audit(1400179585.312:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[   16.328047] type=1400 audit(1400179585.320:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
[   16.328065] type=1400 audit(1400179585.320:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[   16.328673] type=1400 audit(1400179585.320:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[   16.484005] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMRG 1 (20131115/utaddress-251)
[   16.484037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.504097] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.533841] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   16.536136] sp5100_tco: PCI Revision ID: 0x3c
[   16.536164] sp5100_tco: failed to find MMIO address, giving up.
[   16.698237] cfg80211: Calling CRDA to update world regulatory domain
[   17.086694] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   17.377012] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   17.665830] Linux video capture interface: v2.00
[   18.012785] kvm: Nested Virtualization enabled
[   18.012796] kvm: Nested Paging enabled
[   18.251319] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x140100)
[   18.330965] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a.
[   18.493140] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[   18.527190] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/input/input8
[   18.532204] usbcore: registered new interface driver uvcvideo
[   18.532210] USB Video Class driver (1.1.1)
[   18.667128] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[   18.680075] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   18.688590] ath: EEPROM regdomain: 0x60
[   18.688596] ath: EEPROM indicates we should expect a direct regpair map
[   18.688601] ath: Country alpha2 being used: 00
[   18.688604] ath: Regpair used: 0x60
[   19.045657] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   19.059656] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8560000, irq=16
[   19.181159] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[   19.761110] cfg80211: World regulatory domain updated:
[   19.761118] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.761123] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.761127] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.761130] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.761133] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.761136] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.883862] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[   19.988139] asus_wmi: ASUS WMI generic driver loaded
[   20.068807] asus_wmi: Initialization: 0x0
[   20.068856] asus_wmi: BIOS WMI version: 0.8
[   20.068949] asus_wmi: SFUN value: 0x0
[   20.187934] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[   20.203007] hda-intel 0000:00:14.2: Using LPIB position fix
[   20.245291] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   20.323713] asus_wmi: Backlight controlled by ACPI video driver
[   20.392503] SKU: Nid=0x1d sku_cfg=0x40079a2d
[   20.392519] SKU: port_connectivity=0x1
[   20.392522] SKU: enable_pcbeep=0x0
[   20.392524] SKU: check_sum=0x00000007
[   20.392527] SKU: customization=0x0000009a
[   20.392529] SKU: external_amp=0x5
[   20.392531] SKU: platform_type=0x1
[   20.392533] SKU: swap=0x0
[   20.392535] SKU: override=0x1
[   20.393292] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   20.393295]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.393308]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   20.393310]    mono: mono_out=0x0
[   20.393312]    inputs:
[   20.393315]      Mic=0x18
[   20.393317]      Internal Mic=0x12
[   20.393320] realtek: No valid SSID, checking pincfg 0x40079a2d for NID 0x1d
[   20.393323] realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0269
[   20.432067] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   20.438943] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   20.443017] hda-intel 0000:01:05.1: Using LPIB position fix
[   20.452374] hda-intel 0000:01:05.1: Enable sync_write for stable communication
[   20.459755] init: failsafe main process (640) killed by TERM signal
[   20.530936] HDMI ATI/AMD: no speaker allocation for ELD
[   20.533222] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[   20.553403] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input12
[   22.024106] type=1400 audit(1400179591.012:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=728 comm="apparmor_parser"
[   22.024123] type=1400 audit(1400179591.012:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=728 comm="apparmor_parser"
[   22.039367] type=1400 audit(1400179591.028:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=728 comm="apparmor_parser"
[   22.192957] Bluetooth: Core ver 2.17
[   22.194607] NET: Registered protocol family 31
[   22.194613] Bluetooth: HCI device and connection manager initialized
[   22.195324] Bluetooth: HCI socket layer initialized
[   22.195333] Bluetooth: L2CAP socket layer initialized
[   22.195343] Bluetooth: SCO socket layer initialized
[   22.258005] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.258013] Bluetooth: BNEP filters: protocol multicast
[   22.258026] Bluetooth: BNEP socket layer initialized
[   22.404439] Bluetooth: RFCOMM TTY layer initialized
[   22.404457] Bluetooth: RFCOMM socket layer initialized
[   22.404467] Bluetooth: RFCOMM ver 1.11
[   22.619508] type=1400 audit(1400179591.608:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=796 comm="apparmor_parser"
[   22.619525] type=1400 audit(1400179591.608:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=796 comm="apparmor_parser"
[   22.620151] type=1400 audit(1400179591.608:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=796 comm="apparmor_parser"
[   22.695700] type=1400 audit(1400179591.684:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=798 comm="apparmor_parser"
[   22.695716] type=1400 audit(1400179591.684:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser"
[   22.695726] type=1400 audit(1400179591.684:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=798 comm="apparmor_parser"
[   22.696735] type=1400 audit(1400179591.684:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser"
[   23.023636] init: samba-ad-dc main process (721) terminated with status 1
[   23.491726] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.508462] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.588365] atl1c 0000:03:00.0: irq 42 for MSI/MSI-X
[   23.612565] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.641644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.999385] wlan0: authenticate with 00:4f:62:2c:e4:20
[   25.103506] wlan0: send auth to 00:4f:62:2c:e4:20 (try 1/3)
[   25.106981] wlan0: authenticated
[   25.108213] ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   25.108224] ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   25.108228] ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   25.111066] wlan0: associate with 00:4f:62:2c:e4:20 (try 1/3)
[   25.124053] wlan0: RX AssocResp from 00:4f:62:2c:e4:20 (capab=0x411 status=0 aid=3)
[   25.124400] wlan0: associated
[   25.124438] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   27.979770] init: plymouth-upstart-bridge main process ended, respawning
[   28.039127] init: plymouth-upstart-bridge main process ended, respawning
[   33.550399] init: anacron main process (999) killed by TERM signal
[   68.522164] HDMI ATI/AMD: no speaker allocation for ELD
[   68.820395] HDMI ATI/AMD: no speaker allocation for ELD
[   69.120592] HDMI ATI/AMD: no speaker allocation for ELD
[   69.420851] HDMI ATI/AMD: no speaker allocation for ELD
[   69.720965] HDMI ATI/AMD: no speaker allocation for ELD
[   70.021096] HDMI ATI/AMD: no speaker allocation for ELD
[   70.321289] HDMI ATI/AMD: no speaker allocation for ELD
[   70.621479] HDMI ATI/AMD: no speaker allocation for ELD
[   70.921644] HDMI ATI/AMD: no speaker allocation for ELD
[  130.068734] HDMI ATI/AMD: no speaker allocation for ELD
[  130.368398] HDMI ATI/AMD: no speaker allocation for ELD
[  130.668583] HDMI ATI/AMD: no speaker allocation for ELD
[  130.968744] HDMI ATI/AMD: no speaker allocation for ELD
[  131.268907] HDMI ATI/AMD: no speaker allocation for ELD
[  131.569101] HDMI ATI/AMD: no speaker allocation for ELD
[  131.869266] HDMI ATI/AMD: no speaker allocation for ELD
[  132.169387] HDMI ATI/AMD: no speaker allocation for ELD
[  132.469609] HDMI ATI/AMD: no speaker allocation for ELD
root@notebook:/home/darek# fdisk -l

Disk /dev/sda: 250.1 GB, 250059350016 bytes
głowic: 255, sektorów/ścieżkę: 63, cylindrów: 30401, w sumie sektorów: 488397168
Jednostka = sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Identyfikator dysku: 0x29133921

Urządzenie Rozruch   Początek      Koniec   Bloków   ID  System
/dev/sda1   *        2048      206847      102400    7  HPFS/NTFS/exFAT
/dev/sda2          206848    39999487    19896320    7  HPFS/NTFS/exFAT
/dev/sda3        39999488    60000255    10000384   83  Linux
/dev/sda4        60002302   488396799   214197249    5  Rozszerzona
/dev/sda5        60002304    60977151      487424   82  Linux swap / Solaris
/dev/sda6        60979200   160976895    49998848   83  Linux
/dev/sda7       160978944   488396799   163708928   83  Linux
root@notebook:/home/darek#

System to nie debian ( jeszcze, ale już niedługo) to kubuntu 14.04, Fdisk widzę, że nie pokazuje tego usb, jakby ktoś pytał to na ntfs jest win 7 jako drugi system, a na tej karcie na pewno był system fat 32

Offline

 

#6  2014-05-15 21:27:25

  pink - Użytkownik

pink
Użytkownik
Skąd: P17PY93
Zarejestrowany: 2005-09-16
Serwis

Re: jak odzyskać dane z uszkodzonej karty SD?

włóż karte do czytnika sd (najlepiej tego w kompie) spróbuj zamontować z lini polecen (polecenie mount) potem wklej co wypluje terminal.

T430 think-box 4.9-custom x86_64 Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz GenuineIntel GNU/Linux
"Doktor plama i maharadża są pod złotym leszczem." "Człowieka od zwierzęcia odróżnia ciekawość świata. Patrze słucham i wyciągam wnioski."
http://przemyslawmamon.com/
https://www.behance.net/przemyslawmamon

Offline

 

#7  2014-05-15 21:40:25

  vnu007dl - Użytkownik

vnu007dl
Użytkownik
Zarejestrowany: 2010-11-01

Re: jak odzyskać dane z uszkodzonej karty SD?

hmmm ale jak mam zamontować skoro nie znam pod jakim urządzeniem /dev kryje się ta karta?
Polecenie mount pokazuje:

Kod:

root@notebook:/home/darek# mount 
/dev/sda3 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda6 on /home type ext4 (rw)
/dev/sda7 on /mnt/Dane type ext4 (rw)
/dev/sda2 on /mnt/win7 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)

więc nie widzi niczego co mogloby byc ta karta :(

Offline

 

#8  2014-05-15 22:07:02

  pink - Użytkownik

pink
Użytkownik
Skąd: P17PY93
Zarejestrowany: 2005-09-16
Serwis

Re: jak odzyskać dane z uszkodzonej karty SD?

tak jest u mnie

Kod:

/dev/mmcblk0p1

masz jakas inna karte, sprawdz jak i gdzie sie mount-uje.

albo odpal gparted i zobacz co on wypluje bo z reguły wykrywa wszystko co sie da.

Ostatnio edytowany przez pink (2014-05-15 22:10:13)

T430 think-box 4.9-custom x86_64 Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz GenuineIntel GNU/Linux
"Doktor plama i maharadża są pod złotym leszczem." "Człowieka od zwierzęcia odróżnia ciekawość świata. Patrze słucham i wyciągam wnioski."
http://przemyslawmamon.com/
https://www.behance.net/przemyslawmamon

Offline

 

#9  2014-05-16 17:27:33

  vnu007dl - Użytkownik

vnu007dl
Użytkownik
Zarejestrowany: 2010-11-01

Re: jak odzyskać dane z uszkodzonej karty SD?

Gparted nic nie pokazuje

Kod:

root@notebook:/home/darek# gparted
======================
libparted : 2.3
======================

(gpartedbin:2995): GLib-CRITICAL **: Source ID 7 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 6 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 26 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 25 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 73 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 72 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 78 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 77 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 83 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 82 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 86 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 85 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 89 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 88 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 94 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 93 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 97 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 96 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 104 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 103 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 107 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 106 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 110 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 109 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 121 was not found when attempting to remove it

(gpartedbin:2995): GLib-CRITICAL **: Source ID 120 was not found when attempting to remove it

Według twojego pomysłu też nie da się zamontować

Kod:

root@notebook:/mnt# mount /dev/mmcblk0p1 /mnt/karta
mount: urządzenie specjalne /dev/mmcblk0p1 nie istnieje
root@notebook:/mnt#

Offline

 

#10  2014-05-16 21:40:20

  rychu - elektryk dyżurny

rychu
elektryk dyżurny
Skąd: gdańsk
Zarejestrowany: 2004-12-28

Re: jak odzyskać dane z uszkodzonej karty SD?

[quote=vnu007dl]hmmm ale jak mam zamontować skoro nie znam pod jakim urządzeniem /dev kryje się ta karta?[/quote]
przełącz się na konsolę (ctrl+alt+f1) albo odpal w terminalu "tail -f /var/log/syslog". włóż kartę i obserwuj komunikaty.

linux regd. user #248790

Offline

 

#11  2014-05-16 21:47:07

  vnu007dl - Użytkownik

vnu007dl
Użytkownik
Zarejestrowany: 2010-11-01

Re: jak odzyskać dane z uszkodzonej karty SD?

Kod:

darek@notebook:~$ tail -f /var/log/syslog
May 16 21:45:16 notebook kernel: [  124.504684] HDMI ATI/AMD: no speaker allocation for ELD
May 16 21:45:16 notebook kernel: [  124.804859] HDMI ATI/AMD: no speaker allocation for ELD
May 16 21:45:17 notebook kernel: [  125.105028] HDMI ATI/AMD: no speaker allocation for ELD
May 16 21:45:17 notebook kernel: [  125.405188] HDMI ATI/AMD: no speaker allocation for ELD
May 16 21:45:17 notebook kernel: [  125.705390] HDMI ATI/AMD: no speaker allocation for ELD
May 16 21:45:17 notebook kernel: [  126.005557] HDMI ATI/AMD: no speaker allocation for ELD
May 16 21:45:18 notebook kernel: [  126.305748] HDMI ATI/AMD: no speaker allocation for ELD
May 16 21:45:18 notebook kernel: [  126.605873] HDMI ATI/AMD: no speaker allocation for ELD
May 16 21:45:32 notebook dbus[623]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
May 16 21:45:32 notebook dbus[623]: [system] Successfully activated service 'org.freedesktop.PackageKit'
May 16 21:45:53 notebook kernel: [  161.386180] usb 2-1: new high-speed USB device number 3 using ehci-pci
May 16 21:45:53 notebook kernel: [  161.519985] usb 2-1: New USB device found, idVendor=058f, idProduct=6366
May 16 21:45:53 notebook kernel: [  161.519998] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 16 21:45:53 notebook kernel: [  161.520006] usb 2-1: Product: Mass Storage Device
May 16 21:45:53 notebook kernel: [  161.520012] usb 2-1: Manufacturer: Generic
May 16 21:45:53 notebook kernel: [  161.520017] usb 2-1: SerialNumber: 058F63666433
May 16 21:45:53 notebook mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1"
May 16 21:45:53 notebook mtp-probe: bus: 2, device: 3 was not an MTP device
May 16 21:45:53 notebook kernel: [  161.616364] usb-storage 2-1:1.0: USB Mass Storage device detected
May 16 21:45:53 notebook kernel: [  161.620242] scsi6 : usb-storage 2-1:1.0
May 16 21:45:53 notebook kernel: [  161.620383] usbcore: registered new interface driver usb-storage
May 16 21:45:53 notebook kernel: [  161.674977] keucr: module is from the staging directory, the quality is unknown, you have been warned.
May 16 21:45:53 notebook kernel: [  161.681978] usbcore: registered new interface driver eucr
May 16 21:45:54 notebook kernel: [  162.747760] scsi 6:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
May 16 21:45:54 notebook kernel: [  162.750059] sd 6:0:0:0: Attached scsi generic sg1 type 0

i co z tego wynika?

Offline

 

#12  2014-05-18 00:54:29

  rychu - elektryk dyżurny

rychu
elektryk dyżurny
Skąd: gdańsk
Zarejestrowany: 2004-12-28

Re: jak odzyskać dane z uszkodzonej karty SD?

że został wykrył czytnik karty, ale o samej karcie już ani słowa. niestety, ta karta pagibła.

linux regd. user #248790

Offline

 

#13  2014-05-18 01:36:21

  skullman - Użytkownik

skullman
Użytkownik
Zarejestrowany: 2010-04-08

Re: jak odzyskać dane z uszkodzonej karty SD?

[quote=pink]mialem podobnie (tani sandisk) czesc danych odzyskalem bo sie dalo podmatowac ale ogolnie karta na smietnik.

TestDisk - iem sie odzyskuje w linux.[/quote]
Nie ma się czym chwalić ale nie jesteś osamotniony z tym problemem... bo Polak to mądry po szkodzie a i to nie zawsze.
Niestety SanDisk to najczęściej podrabiany producent kart pamięci choć produkty innych też nie są w 100% pewne.
@vnu007.dll, następnym razem jak kupisz kartę w necie (pena z resztą też) to od razu zrób jej dokładny test, zacznij od szykości zapisu/odczytu czy bardzo odstaje od tego co podaje producent (ale na całej pojemności karty a nie tylko 700 mega) i takie tam bla bla bla. Generalnie oryginalne karty są dość niezawodne ale podróbki to potrafia uprzykrzyć życie na maksa. No i pozostaje logika, jak oryginalna karta kosztuje ileś tam a okazyjnie można ją wyrwać za 1/4 ceny to aż się prosi o utratę danych.

Ostatnio edytowany przez skullman (2014-05-18 01:38:55)

Offline

 

#14  2014-05-18 07:02:04

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: jak odzyskać dane z uszkodzonej karty SD?

Robić testy wszystkim flashom -- jest narzędzie do tego: f3

Offline

 

#15  2014-05-18 10:50:44

  vnu007dl - Użytkownik

vnu007dl
Użytkownik
Zarejestrowany: 2010-11-01

Re: jak odzyskać dane z uszkodzonej karty SD?

A nie da się uzyskać dostępu do tej karty dłubiąc coś tam przy elektronice? Na forum elektroda czytałem, że w takich wypadkach można coś tam zlutować  na karcie i że to może pomóc, ale zupełnie nie mam o tym pojęcia.
Co do samej karty, no to cóż mam nauczkę mogłem zgrać wcześniej te dane. Nie przyszło mi do głowy jednak że coś takiego się stanie, przez moje ręce przeszło już tyle różnych kart pamięci w różnych aparatach komórkach kamerach i nic się nie działo i do dziś działają. Szkoda, że nie mogę jej zareklamować bo kupiłem ją w innym mieście zupełnie i tylko dlatego, że była w fajnym komplecie z przejściówkami na karte SD i usb....
No ale to co teraz, czyli karta jest uszkodzona i żadnym oprogramowaniem nic z niej nie wyciągnę tak? Zostaje tylko ingerencja w elektronikę?
Pytanie 2, jak sprawdzić np po wpięciu pendrive albo karty, że nie jest podrobiona? Jakiś soft pokazuje jakie tam jest oprogramowanie albo prawdziwego producenta?

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.012 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00015 SET CHARSET latin2
0.00005 SET NAMES latin2
0.00131 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.119.109.101' WHERE u.id=1
0.00096 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.119.109.101', 1732680993)
0.00060 SELECT * FROM punbb_online WHERE logged<1732680693
0.00067 SELECT topic_id FROM punbb_posts WHERE id=267126
0.00006 SELECT id FROM punbb_posts WHERE topic_id=25818 ORDER BY posted
0.00054 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=25818 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00401 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=25818 ORDER BY p.id LIMIT 0,25
0.00100 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=25818
Total query time: 0.0094 s