Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2014-07-25 15:27:32
Zath - Użytkownik
- Zath
- Użytkownik
- Zarejestrowany: 2014-07-23
[SOLVED] Problem z wirtualnymi terminalami
[b]Początek edycji z 31. września 2014:[/b]
Udało mi się naprawić problem.
Rozwiązanie polegało na wejściu do shella z GRUBa, wpisaniu dwóch komend:
Kod:
set pager=1 vbeinfo
a następnie odnalezieniu odpowiedniej rozdzielczości ekranu, zapisaniu (np. na kartce) liczby na początku w wybranej pozycji wraz z "vga=", na przykład "vga=0x111".
Potem trzeba wyjść z shella (Esc), zbootować Linuxa, przejść do katalogu /etc/grub.d, otworzyć "10-linux.conf" w edytorze tekstu, odnaleźć linijki z kernelem i dodać wcześniej zapisanego argumentu na koniec tej linijki. Potem tylko reboot i już można przełączać terminale z X-ów.
Co do powodu problemu, to jest nim opcja UseTiming1366 potrzebna do poprawnego działania X-ów na SiS 771/671.
[b]Koniec edycji z 31. września 2014.[/b]
Od razu przejdę do problemu:
Nie mogę przełączyć się z X na wirtualny terminal.
Gdy nacisnę Ctrl+Alf+F[1-6], ekran na ułamek sekundy staje się czarny, potem "zacina się", a po 1-2 sekundach restartuje się X.org, oczywiście nie przenosząc mnie do wirtualnego terminala, lecz pozostawiając mnie przy okienku do logowania.
Gdy próbuję przełączyć na vt używając komendy chvt, otrzymuję następujący błąd:
Kod:
Couldn't get a file descriptor referring to the console
Chvt powoduje ten sam problem jak Ctrl+Alt+F[1-6], gdy zostanie włączony kontem root.
X.org w wersji 1.16.
Sterownik graficzny sisimedia (od użytkownika mati75 z tego forum)
Debian Jessie/Testing
LXDE, Openbox 3.5.2
Karta graficzna SiS Mirage 3 (SiS 771/671)
Output z inxi -F -f:
Kod:
System: Host: localhost Kernel: 3.14-1-686-pae i686 (32 bit)
Desktop: LXDE (Openbox 3.5.2) Distro: Debian GNU/Linux jessie/sid
Machine: System: ASUSTeK product: K50C v: 1.0
Mobo: ASUS model: K50C v: 1.0
Bios: American Megatrends v: 209 date: 01/06/2010
CPU: Single core Intel Celeron D 220 (-UP-) cache: 512 KB
clocked at 1500 MHz
CPU Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov
constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts fpu fxsr lahf_lm
lm mca mce mmx monitor msr mtrr nx pae pat pbe pdcm pebs pge pni
pse pse36 sep ss sse sse2 ssse3 tm tm2 tsc vme xtpr
Graphics: Card: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter
Display Server: X.Org 1.16.0 driver: N/A
Resolution: 1368x768@60.00hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
GLX Version: 3.0 Mesa 10.2.3
Audio: Card Silicon Integrated Systems [SiS] Azalia Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.14-1-686-pae
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169
IF: eth0 state: down mac: 48:5b:39:44:6b:a3
Card-2: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
driver: ath9k
IF: wlan0 state: up mac: 1c:4b:d6:ab:fb:64
Drives: HDD Total Size: 250.1GB (23.5% used)
ID-1: /dev/sda model: ST9250315AS size: 250.1GB
Partition: ID-1: / size: 9.4G used: 3.6G (41%) fs: ext4 dev: /dev/sda6
ID-2: /home size: 78G used: 48G (65%) fs: ext4 dev: /dev/sda7
ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
Sensors: System Temperatures: cpu: 60.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 133 Uptime: 3:06 Memory: 491.1/3039.7MB
Client: Shell (bash) inxi: 2.1.28/var/log/Xorg.0.log:
Kod:
[ 7409.427]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 7409.427] X Protocol Version 11, Revision 0
[ 7409.427] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 7409.427] Current Operating System: Linux localhost 3.14-1-686-pae #1 SMP Debian 3.14.12-1 (2014-07-11) i686
[ 7409.427] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-686-pae root=UUID=40ad67e7-53e8-4593-bda6-b8768ac119a8 ro quiet
[ 7409.427] Build Date: 17 July 2014 11:01:50PM
[ 7409.427] xorg-server 2:1.16.0-1 (http://www.debian.org/support)
[ 7409.427] Current version of pixman: 0.32.6
[ 7409.427] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7409.427] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7409.427] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 25 16:29:09 2014
[ 7409.427] (==) Using config file: "/etc/X11/xorg.conf"
[ 7409.427] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7409.428] (==) No Layout section. Using the first Screen section.
[ 7409.428] (**) |-->Screen "Default Screen" (0)
[ 7409.428] (**) | |-->Monitor "Configured Monitor"
[ 7409.428] (**) | |-->Device "Configured Video Device"
[ 7409.428] (**) Option "IgnoreABI"
[ 7409.429] (**) Ignoring ABI Version
[ 7409.429] (==) Automatically adding devices
[ 7409.429] (==) Automatically enabling devices
[ 7409.429] (==) Automatically adding GPU devices
[ 7409.429] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 7409.429] Entry deleted from font path.
[ 7409.429] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 7409.429] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7409.429] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7409.429] (II) Loader magic: 0xb776f700
[ 7409.429] (II) Module ABI versions:
[ 7409.429] X.Org ANSI C Emulation: 0.4
[ 7409.429] X.Org Video Driver: 18.0
[ 7409.429] X.Org XInput driver : 21.0
[ 7409.429] X.Org Server Extension : 8.0
[ 7409.429] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7409.431] (--) PCI:*(0:1:0:0) 1039:6351:1043:19e2 rev 16, Mem @ 0xd0000000/268435456, 0xfe9e0000/131072, I/O @ 0x0000dc00/128
[ 7409.431] (II) LoadModule: "glx"
[ 7409.432] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7409.434] (II) Module glx: vendor="X.Org Foundation"
[ 7409.434] compiled for 1.16.0, module version = 1.0.0
[ 7409.434] ABI class: X.Org Server Extension, version 8.0
[ 7409.434] (==) AIGLX enabled
[ 7409.434] (II) LoadModule: "sisimedia"
[ 7409.434] (II) Loading /usr/lib/xorg/modules/drivers/sisimedia_drv.so
[ 7409.435] (II) Module sisimedia: vendor="X.Org Foundation"
[ 7409.435] compiled for 1.15.1, module version = 0.8.0
[ 7409.435] Module class: X.Org Video Driver
[ 7409.435] ABI class: X.Org Video Driver, version 15.0
[ 7409.435] (WW) module ABI major version (15) doesn't match the server's version (18)
[ 7409.435] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340,
[M]670/[M]770[GX], [M]671/[M]771[GX]
[ 7409.435] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40/XG42)
[ 7409.435] (++) using VT number 7
[ 7409.436] (II) SIS_pci_probe - begin, entity_num=0
[ 7409.436] (II) vendor_id=0x1039
[ 7409.436] (II) device_id=0x6351
[ 7409.436] (II) bus=1
[ 7409.436] (II) dev=0
[ 7409.436] (II) func=0
[ 7409.436] (II) SIS_pci_probe - ConfigPciEntity found
[ 7409.436] (II) SIS(0): SIS_pci_probe - GetEntityInfo chipset is 0x6351
[ 7409.436] (II) SIS(0): SIS_pci_probe - end
[ 7409.436] (II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 1.15.1.0)
[ 7409.436] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
[ 7409.436] (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
[ 7409.436] (II) SIS(0): *** for documentation, updates and a Premium Version.
[ 7409.436] (II) SIS(0): RandR rotation support not available in this version.
[ 7409.436] (II) SIS(0): Dynamic modelist support not available in this version.
[ 7409.436] (II) SIS(0): Screen growing support not available in this version.
[ 7409.436] (II) SIS(0): Advanced Xv video blitter not available in this version.
[ 7409.436] (II) SIS(0): Advanced MergedFB support not available in this version.
[ 7409.436] (--) SIS(0): sisfb not found
[ 7409.436] (--) SIS(0): Relocated I/O registers at 0xDC00
[ 7409.437] (II) Loading sub module "ramdac"
[ 7409.437] (II) LoadModule: "ramdac"
[ 7409.437] (II) Module "ramdac" already built-in
[ 7409.437] (II) SIS(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 7409.437] (**) SIS(0): Depth 24, (--) framebuffer bpp 32
[ 7409.437] (==) SIS(0): RGB weight 888
[ 7409.437] (==) SIS(0): Default visual is TrueColor
[ 7409.441] (WW) SIS(0): Could not find/read video BIOS
[ 7409.442] (**) SIS(0): Option "UseTiming1366" "yes"
[ 7409.442] (==) SIS(0): Color HW cursor is enabled
[ 7409.442] (II) SIS(0): Using VRAM command queue, size 512k
[ 7409.442] (==) SIS(0): Hotkey display switching is enabled
[ 7409.442] (==) SIS(0): SiSCtrl utility interface is disabled
[ 7409.442] (II) SIS(0): For information on SiSCtrl, see
http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
[ 7409.442] (==) SIS(0): X server will not keep DPI constant for all screen sizes
[ 7409.442] (==) SIS(0): DRI enabled
[ 7409.442] (II) SIS(0): Using Special Timing 1366x768 with LVDS.
[ 7409.442] (--) SIS(0): 131072K shared video RAM (UMA)
[ 7409.442] (--) SIS(0): DRAM type: DDR SDRAM
[ 7409.442] (--) SIS(0): Memory clock: 503.174 MHz
[ 7409.442] (--) SIS(0): DRAM bus width: 64 bit
[ 7409.442] (--) SIS(0): Linear framebuffer at 0xD0000000
[ 7409.442] (--) SIS(0): MMIO registers at 0xFE9E0000 (size 64K)
[ 7409.442] (--) SIS(0): VideoRAM: 131072 KB
[ 7409.442] (II) SIS(0): Using 20480K of framebuffer memory at offset 0K
[ 7409.442] (II) Loading sub module "ddc"
[ 7409.442] (II) LoadModule: "ddc"
[ 7409.442] (II) Module "ddc" already built-in
[ 7409.442] (--) SIS(0): Detected SiS307LV video bridge (Charter/UMC-1, ID 7; Rev 0xe1)
[ 7412.196] (--) SIS(0): No CRT1/VGA detected
[ 7412.196] (--) SIS(0): Detected LCD/plasma panel (1366x768, 14, non-exp., RGB18 [ef030a])
[ 7412.196] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7412.196] (II) SIS(0): CRT1 gamma correction is enabled
[ 7412.196] (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
[ 7412.196] (II) SIS(0): CRT2 gamma correction is enabled
[ 7412.196] (--) SIS(0): Memory bandwidth at 32 bpp is 1006.35 MHz
[ 7412.196] (--) SIS(0): Detected LCD PanelDelayCompensation 0x06 (for LCD=CRT2)
[ 7412.196] (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT1)
[ 7412.196] (--) SIS(0): 302LV/302ELV: Using EMI 0x680d7039 (LCD)
[ 7412.196] (--) SIS(0): CRT2 DDC probing failed
[ 7412.196] (==) SIS(0): Min pixel clock is 10 MHz
[ 7412.196] (--) SIS(0): Max pixel clock is 340 MHz
[ 7412.196] (II) SIS(0): Replaced entire mode list with built-in modes
[ 7412.196] (II) SIS(0): Correcting missing CRT2 monitor HSync range
[ 7412.196] (II) SIS(0): Correcting missing CRT2 monitor VRefresh range
[ 7412.196] (II) SIS(0): "Unknown reason" in the following list means that the mode
[ 7412.196] (II) SIS(0): is not supported on the chipset/bridge/current output device.
[ 7412.196] (II) SIS(0): Configured Monitor: Using hsync range of 30.00-80.00 kHz
[ 7412.196] (II) SIS(0): Configured Monitor: Using vrefresh range of 59.00-61.00 Hz
[ 7412.196] (II) SIS(0): Configured Monitor: Using vrefresh value of 71.00 Hz
[ 7412.196] (WW) SIS(0): Unable to estimate virtual size
[ 7412.196] (II) SIS(0): Clock range: 10.00 to 340.00 MHz
[ 7412.196] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 7412.196] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 7412.196] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 7412.197] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 7412.197] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 7412.197] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 7412.197] (II) SIS(0): Not using default mode "800x600" (hsync out of range)
[ 7412.197] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[ 7412.197] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[ 7412.197] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[ 7412.197] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[ 7412.197] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[ 7412.197] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[ 7412.197] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 7412.197] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 7412.197] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 7412.197] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[ 7412.197] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[ 7412.197] (--) SIS(0): Virtual size is 1368x768 (pitch 1368)
[ 7412.197] (**) SIS(0): *Default mode "1366x768" (1368x768) (For CRT device: 85.2 MHz, 47.8 kHz, 59.8 Hz)
[ 7412.197] (**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
[ 7412.197] (**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
[ 7412.197] (==) SIS(0): DPI set to (96, 96)
[ 7412.197] (II) Loading sub module "fb"
[ 7412.197] (II) LoadModule: "fb"
[ 7412.197] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7412.198] (II) Module fb: vendor="X.Org Foundation"
[ 7412.198] compiled for 1.16.0, module version = 1.0.0
[ 7412.198] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7412.198] (II) Loading sub module "exa"
[ 7412.198] (II) LoadModule: "exa"
[ 7412.198] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 7412.198] (II) Module exa: vendor="X.Org Foundation"
[ 7412.198] compiled for 1.16.0, module version = 2.6.0
[ 7412.198] ABI class: X.Org Video Driver, version 18.0
[ 7412.198] (--) Depth 24 pixmap format is 32 bpp
[ 7412.198] (II) Loading sub module "vbe"
[ 7412.198] (II) LoadModule: "vbe"
[ 7412.199] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 7412.199] (II) Module vbe: vendor="X.Org Foundation"
[ 7412.199] compiled for 1.16.0, module version = 1.1.0
[ 7412.199] ABI class: X.Org Video Driver, version 18.0
[ 7412.199] (II) Loading sub module "int10"
[ 7412.199] (II) LoadModule: "int10"
[ 7412.199] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 7412.199] (II) Module int10: vendor="X.Org Foundation"
[ 7412.200] compiled for 1.16.0, module version = 1.0.0
[ 7412.200] ABI class: X.Org Video Driver, version 18.0
[ 7412.200] (II) SIS(0): initializing int10
[ 7412.200] (II) SIS(0): Primary V_BIOS segment is: 0xc000
[ 7412.202] (II) SIS(0): VESA BIOS detected
[ 7412.202] (II) SIS(0): VESA VBE Version 3.0
[ 7412.202] (II) SIS(0): VESA VBE Total Mem: 131072 kB
[ 7412.202] (II) SIS(0): VESA VBE OEM: SiS
[ 7412.202] (II) SIS(0): VESA VBE OEM Software Rev: 1.0
[ 7412.202] (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
[ 7412.202] (II) SIS(0): VESA VBE OEM Product: 6330
[ 7412.202] (II) SIS(0): VESA VBE OEM Product Rev: 3.74.22b
[ 7412.208] (II) SIS(0): Setting standard mode 0x7f
[ 7413.549] drmOpenDevice: node name is /dev/dri/card0
[ 7413.549] drmOpenDevice: open result is 10, (OK)
[ 7413.549] drmOpenDevice: node name is /dev/dri/card0
[ 7413.549] drmOpenDevice: open result is 10, (OK)
[ 7413.549] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 7413.549] drmOpenDevice: node name is /dev/dri/card0
[ 7413.549] drmOpenDevice: open result is 10, (OK)
[ 7413.549] drmOpenByBusid: drmOpenMinor returns 10
[ 7413.549] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 7413.549] (II) [drm] DRM interface version 1.4
[ 7413.549] (II) [drm] DRM open master succeeded.
[ 7413.549] (II) SIS(0): [drm] Using the DRM lock SAREA also for drawables.
[ 7413.549] (II) SIS(0): [drm] framebuffer handle = 0xd0000000
[ 7413.549] (II) SIS(0): [drm] added 1 reserved context for kernel
[ 7413.550] (II) SIS(0): X context handle = 0x1
[ 7413.550] (II) SIS(0): [drm] installed DRM signal handler
[ 7413.550] (II) SIS(0): [dri] Video RAM memory heap: 0x1400000 to 0x7f70000 (110016KB)
[ 7413.550] (II) SIS(0): [dri] handle = 0xfe9e0000, size = 65536
[ 7413.550] (II) SIS(0): [drm] AGP enabled
[ 7413.577] (II) SIS(0): [drm] Allocated 32MB AGP memory
[ 7413.580] (II) SIS(0): [drm] Bound 32MB AGP memory
[ 7413.580] (II) SIS(0): [drm] No valid IRQ number for device 1:0:0 (code -22)
[ 7413.580] (II) SIS(0): [dri] Visual configs initialized
[ 7413.580] (II) EXA(0): Offscreen pixmap area of 16769024 bytes
[ 7413.580] (II) EXA(0): Driver registered support for the following operations:
[ 7413.580] (II) Solid
[ 7413.580] (II) Copy
[ 7413.580] (--) SIS(0): CPU frequency 1500.33Mhz
[ 7413.583] (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
[ 7413.594] (--) SIS(0): Checked libc memcpy()... 274.9 MiB/s
[ 7413.604] (--) SIS(0): Checked built-in-1 memcpy()... 278.4 MiB/s
[ 7413.624] (--) SIS(0): Checked built-in-2 memcpy()... 133.4 MiB/s
[ 7413.634] (--) SIS(0): Checked MMX memcpy()... 277.7 MiB/s
[ 7413.651] (--) SIS(0): Checked SSE memcpy()... 282.4 MiB/s
[ 7413.661] (--) SIS(0): Checked MMX2 memcpy()... 283.3 MiB/s
[ 7413.661] (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
[ 7413.661] (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
[ 7413.662] (--) SIS(0): CPU frequency 1500.33Mhz
[ 7413.664] (II) SIS(0): Benchmarking video RAM to system RAM memory transfer methods:
[ 7413.713] (--) SIS(0): Checked libc memcpy()... 64.8 MiB/s
[ 7413.768] (--) SIS(0): Checked built-in-1 memcpy()... 51.1 MiB/s
[ 7413.835] (--) SIS(0): Checked built-in-2 memcpy()... 42.3 MiB/s
[ 7413.873] (--) SIS(0): Checked MMX memcpy()... 75.7 MiB/s
[ 7413.905] (--) SIS(0): Checked SSE memcpy()... 86.2 MiB/s
[ 7413.947] (--) SIS(0): Checked MMX2 memcpy()... 78.6 MiB/s
[ 7413.947] (--) SIS(0): Using SSE method for aligned data transfers from video RAM
[ 7413.947] (--) SIS(0): Using MMX2 method for unaligned data transfers from video RAM
[ 7413.947] (==) SIS(0): Backing store enabled
[ 7413.947] (==) SIS(0): Silken mouse enabled
[ 7413.949] (==) SIS(0): DPMS enabled
[ 7413.949] (--) SIS(0): Hardware supports one video overlay
[ 7413.949] (II) SIS(0): Using SiS300/315/330/340/350 series HW Xv by default on CRT2
[ 7413.950] PCI: CNF00 - CNF1B:
[ 7413.950] 00: 00000000:00000000000000000000000000000000
[ 7413.950] 04: 41004100:01000001000000000100000100000000
[ 7413.950] 08: ffffffff:11111111111111111111111111111111
[ 7413.950] 0c: ffffffff:11111111111111111111111111111111
[ 7413.950] 10: b7143c00:10110111000101000011110000000000
[ 7413.950] 14: 00008e0d:00000000000000001000111000001101
[ 7413.950] 18: ffffffff:11111111111111111111111111111111
[ 7413.950] PCI: CNF2C - CNF47:
[ 7413.950] 2c: ffffffff:11111111111111111111111111111111
[ 7413.950] 30: ffffffff:11111111111111111111111111111111
[ 7413.950] 34: ffffffff:11111111111111111111111111111111
[ 7413.950] 38: ffffffff:11111111111111111111111111111111
[ 7413.950] 3c: ffffffff:11111111111111111111111111111111
[ 7413.950] 40: 01100420:00000001000100000000010000100000
[ 7413.950] 44: 00ff4407:00000000111111110100010000000111
[ 7413.950] AGP: CNF50 - CNF5B:
[ 7413.950] 50: ac13ac13:10101100000100111010110000010011
[ 7413.950] 54: ac13ac13:10101100000100111010110000010011
[ 7413.950] 58: 00003030:00000000000000000011000000110000
[ 7413.950] CRT1: SR05 - SR12:
[ 7413.950] 05: a1:10100001
[ 7413.950] 06: 42:01000010
[ 7413.950] 07: 44:01000100
[ 7413.950] 08: 70:01110000
[ 7413.950] 09: 01:00000001
[ 7413.950] 0a: 10:00010000
[ 7413.950] 0b: 00:00000000
[ 7413.950] 0c: 03:00000011
[ 7413.950] 0d: 00:00000000
[ 7413.950] 0e: 42:01000010
[ 7413.950] 0f: 08:00001000
[ 7413.950] 10: 57:01010111
[ 7413.950] 11: 03:00000011
[ 7413.950] 12: 00:00000000
[ 7413.950] CRT1: SR13 - SR16 (reserved):
[ 7413.950] 13: 00:00000000
[ 7413.950] 14: 00:00000000
[ 7413.950] 15: 00:00000000
[ 7413.950] 16: 00:00000000
[ 7413.950] CRT1: SR19 - SR1A (reserved)
[ 7413.950] CRT1: SR1B - SR3A:
[ 7413.950] 1b: 00:00000000
[ 7413.950] 1c: 8f:10001111
[ 7413.950] 1d: 00:00000000
[ 7413.950] 1e: 7a:01111010
[ 7413.950] 1f: c0:11000000
[ 7413.950] 20: a1:10100001
[ 7413.950] 21: a3:10100011
[ 7413.950] 22: f3:11110011
[ 7413.950] 23: 00:00000000
[ 7413.950] 24: 00:00000000
[ 7413.950] 25: 00:00000000
[ 7413.950] 26: 40:01000000
[ 7413.950] 27: 1f:00011111
[ 7413.950] 28: 7a:01111010
[ 7413.950] 29: 06:00000110
[ 7413.950] 2a: 82:10000010
[ 7413.950] 2b: 1b:00011011
[ 7413.950] 2c: e1:11100001
[ 7413.950] 2d: 01:00000001
[ 7413.950] 2e: 29:00101001
[ 7413.950] 2f: 01:00000001
[ 7413.950] 30: 82:10000010
[ 7413.951] 31: 00:00000000
[ 7413.951] 32: 50:01010000
[ 7413.951] 33: 20:00100000
[ 7413.951] 34: 00:00000000
[ 7413.951] 35: 00:00000000
[ 7413.951] 36: 00:00000000
[ 7413.951] 37: 04:00000100
[ 7413.951] 38: 86:10000110
[ 7413.951] 39: 40:01000000
[ 7413.951] 3a: 00:00000000
[ 7413.951] CRT1: SR3B (reserved)
[ 7413.951] CRT1: SR3C - SR3F:
[ 7413.951] 3c: 08:00001000
[ 7413.951] 3d: 01:00000001
[ 7413.951] 3e: 00:00000000
[ 7413.951] 3f: 00:00000000
[ 7413.951] CRT1: CR19 - CR1A:
[ 7413.951] 19: 00:00000000
[ 7413.951] 1a: 00:00000000
[ 7413.951] CRT1: CR1B - CR27 (undocumented?)
[ 7413.951] CRT1: CR28 - CR2E:
[ 7413.951] 28: 04:00000100
[ 7413.951] 29: 20:00100000
[ 7413.951] 2a: 00:00000000
[ 7413.951] 2b: 00:00000000
[ 7413.951] 2c: 00:00000000
[ 7413.951] 2d: 00:00000000
[ 7413.951] 2e: 00:00000000
[ 7413.951] CRT1: CR2F (reserved)
[ 7413.951] VGA BIOS: CR30 - CR3F:
[ 7413.951] 30: 21:00100001
[ 7413.951] 31: 40:01000000
[ 7413.951] 32: 08:00001000
[ 7413.951] 33: 00:00000000
[ 7413.951] 34: 7f:01111111
[ 7413.951] 35: 00:00000000
[ 7413.951] 36: ef:11101111
[ 7413.951] 37: 03:00000011
[ 7413.951] 38: 20:00100000
[ 7413.951] 39: 3c:00111100
[ 7413.951] 3a: 00:00000000
[ 7413.951] 3b: 08:00001000
[ 7413.951] 3c: bc:10111100
[ 7413.951] 3d: 20:00100000
[ 7413.951] 3e: 00:00000000
[ 7413.951] 3f: 00:00000000
[ 7413.951] CRT1: CR40 - CR43:
[ 7413.951] 40: 00:00000000
[ 7413.951] 41: 00:00000000
[ 7413.951] 42: 00:00000000
[ 7413.951] 43: 00:00000000
[ 7413.951] CRT1: CR44 - CR45 (reserved)
[ 7413.951] CRT1: CR46 - CR67:
[ 7413.951] 46: 00:00000000
[ 7413.951] 47: fe:11111110
[ 7413.951] 48: c0:11000000
[ 7413.951] 49: 08:00001000
[ 7413.951] 4a: bf:10111111
[ 7413.951] 4b: 88:10001000
[ 7413.951] 4c: 00:00000000
[ 7413.951] 4d: 10:00010000
[ 7413.951] 4e: 10:00010000
[ 7413.951] 4f: 20:00100000
[ 7413.951] 50: 00:00000000
[ 7413.951] 51: 00:00000000
[ 7413.951] 52: 12:00010010
[ 7413.951] 53: 40:01000000
[ 7413.951] 54: 00:00000000
[ 7413.951] 55: 00:00000000
[ 7413.951] 56: 00:00000000
[ 7413.951] 57: 00:00000000
[ 7413.951] 58: 00:00000000
[ 7413.951] 59: 00:00000000
[ 7413.951] 5a: 00:00000000
[ 7413.951] 5b: 00:00000000
[ 7413.951] 5c: 00:00000000
[ 7413.951] 5d: 00:00000000
[ 7413.951] 5e: 00:00000000
[ 7413.951] 5f: 00:00000000
[ 7413.951] 60: 00:00000000
[ 7413.951] 61: 00:00000000
[ 7413.951] 62: 00:00000000
[ 7413.951] 63: 00:00000000
[ 7413.951] 64: 00:00000000
[ 7413.952] 65: 00:00000000
[ 7413.952] 66: 00:00000000
[ 7413.952] 67: 00:00000000
[ 7413.952] CRT1: CR68 - CR6F (DRAM registers reserved for backward compatibility with 760)
[ 7413.952] CRT1: CR70 - CR77 (undocumented?)
[ 7413.952] SMA BIOS: CR78 - CR7F:
[ 7413.952] 78: 44:01000100
[ 7413.952] 79: 71:01110001
[ 7413.952] 7a: 98:10011000
[ 7413.952] 7b: 02:00000010
[ 7413.952] 7c: a3:10100011
[ 7413.952] 7d: 0a:00001010
[ 7413.952] 7e: a3:10100011
[ 7413.952] 7f: 03:00000011
[ 7413.952] CRT1: CR80 - CR9B:
[ 7413.952] 80: ffffffff:11111111111111111111111111111111
[ 7413.952] 84: ffffffff:11111111111111111111111111111111
[ 7413.952] 88: ffffffff:11111111111111111111111111111111
[ 7413.952] 8c: ffffffff:11111111111111111111111111111111
[ 7413.952] 90: ffffffff:11111111111111111111111111111111
[ 7413.952] 94: ffffffff:11111111111111111111111111111111
[ 7413.952] 98: ffffffff:11111111111111111111111111111111
[ 7413.952] 9c: ffffffff:11111111111111111111111111111111
[ 7413.952] a0: ffffffff:11111111111111111111111111111111
[ 7413.952] a4: ffffffff:11111111111111111111111111111111
[ 7413.952] a8: ffffffff:11111111111111111111111111111111
[ 7413.952] ac: ffffffff:11111111111111111111111111111111
[ 7413.952] b0: ffffffff:11111111111111111111111111111111
[ 7413.952] CRT1: CRC0 - CRF3:
[ 7413.952] c0: ffffffff:11111111111111111111111111111111
[ 7413.952] c4: ffffffff:11111111111111111111111111111111
[ 7413.952] c8: ffffffff:11111111111111111111111111111111
[ 7413.952] cc: ffffffff:11111111111111111111111111111111
[ 7413.952] d0: ffffffff:11111111111111111111111111111111
[ 7413.952] d4: ffffffff:11111111111111111111111111111111
[ 7413.952] d8: ffffffff:11111111111111111111111111111111
[ 7413.952] dc: ffffffff:11111111111111111111111111111111
[ 7413.952] e0: ffffffff:11111111111111111111111111111111
[ 7413.952] e4: ffffffff:11111111111111111111111111111111
[ 7413.952] e8: ffffffff:11111111111111111111111111111111
[ 7413.952] ec: ffffffff:11111111111111111111111111111111
[ 7413.952] f0: ffffffff:11111111111111111111111111111111
[ 7413.952] CRT2: SIGNAL REGISTERS, PART1 00 - 45:
[ 7413.952] 00: 41:01000001
[ 7413.952] 01: 79:01111001
[ 7413.952] 02: 50:01010000
[ 7413.952] 03: 57:01010111
[ 7413.952] 04: 00:00000000
[ 7413.952] 05: 00:00000000
[ 7413.952] 06: 00:00000000
[ 7413.952] 07: ac:10101100
[ 7413.952] 08: f7:11110111
[ 7413.952] 09: 52:01010010
[ 7413.952] 0a: 66:01100110
[ 7413.952] 0b: 7a:01111010
[ 7413.952] 0c: 55:01010101
[ 7413.952] 0d: 8e:10001110
[ 7413.952] 0e: 15:00010101
[ 7413.952] 0f: ff:11111111
[ 7413.952] 10: 0b:00001011
[ 7413.952] 11: 3d:00111101
[ 7413.952] 12: 13:00010011
[ 7413.952] 13: 00:00000000
[ 7413.952] 14: b1:10110001
[ 7413.952] 15: 15:00010101
[ 7413.952] 16: 00:00000000
[ 7413.952] 17: ab:10101011
[ 7413.952] 18: 02:00000010
[ 7413.952] 19: 27:00100111
[ 7413.952] 1a: d8:11011000
[ 7413.952] 1b: 15:00010101
[ 7413.952] 1c: ff:11111111
[ 7413.952] 1d: 13:00010011
[ 7413.952] 1e: 00:00000000
[ 7413.952] 1f: 56:01010110
[ 7413.952] 20: 15:00010101
[ 7413.952] 21: ff:11111111
[ 7413.952] 22: 77:01110111
[ 7413.952] 23: c5:11000101
[ 7413.952] 24: 00:00000000
[ 7413.952] 25: 00:00000000
[ 7413.952] 26: 10:00010000
[ 7413.952] 27: 04:00000100
[ 7413.952] 28: 00:00000000
[ 7413.952] 29: 00:00000000
[ 7413.952] 2a: 03:00000011
[ 7413.953] 2b: 00:00000000
[ 7413.953] 2c: 30:00110000
[ 7413.953] 2d: 03:00000011
[ 7413.953] 2e: 8e:10001110
[ 7413.953] 2f: 05:00000101
[ 7413.953] 30: 01:00000001
[ 7413.953] 31: 59:01011001
[ 7413.953] 32: ba:10111010
[ 7413.953] 33: a0:10100000
[ 7413.953] 34: 00:00000000
[ 7413.953] 35: 22:00100010
[ 7413.953] 36: 14:00010100
[ 7413.953] 37: b1:10110001
[ 7413.953] 38: 62:01100010
[ 7413.953] 39: 0a:00001010
[ 7413.953] 3a: 00:00000000
[ 7413.953] 3b: 00:00000000
[ 7413.953] 3c: 00:00000000
[ 7413.953] 3d: 00:00000000
[ 7413.953] 3e: 01:00000001
[ 7413.953] 3f: 01:00000001
[ 7413.953] 40: 00:00000000
[ 7413.953] 41: 00:00000000
[ 7413.953] 42: 00:00000000
[ 7413.953] 43: 00:00000000
[ 7413.953] 44: 00:00000000
[ 7413.953] 45: 00:00000000
[ 7413.953] CRT2: TV SIGNAL REGISTERS, PART2 00 - 4d:
[ 7413.953] 00: 3c:00111100
[ 7413.953] 01: 37:00110111
[ 7413.953] 02: 13:00010011
[ 7413.953] 03: ff:11111111
[ 7413.953] 04: 04:00000100
[ 7413.953] 05: 15:00010101
[ 7413.953] 06: ff:11111111
[ 7413.953] 07: 0c:00001100
[ 7413.953] 08: 0c:00001100
[ 7413.953] 09: 90:10010000
[ 7413.953] 0a: 40:01000000
[ 7413.953] 0b: 01:00000001
[ 7413.953] 0c: 0a:00001010
[ 7413.953] 0d: 06:00000110
[ 7413.953] 0e: 0d:00001101
[ 7413.953] 0f: 04:00000100
[ 7413.953] 10: 0a:00001010
[ 7413.953] 11: 06:00000110
[ 7413.953] 12: 14:00010100
[ 7413.953] 13: 0d:00001101
[ 7413.953] 14: 04:00000100
[ 7413.953] 15: 0a:00001010
[ 7413.953] 16: 00:00000000
[ 7413.953] 17: 81:10000001
[ 7413.953] 18: 1b:00011011
[ 7413.953] 19: 15:00010101
[ 7413.953] 1a: 78:01111000
[ 7413.953] 1b: f6:11110110
[ 7413.953] 1c: 86:10000110
[ 7413.953] 1d: 55:01010101
[ 7413.953] 1e: da:11011010
[ 7413.953] 1f: 08:00001000
[ 7413.953] 20: 07:00000111
[ 7413.953] 21: d6:11010110
[ 7413.953] 22: 35:00110101
[ 7413.953] 23: 5e:01011110
[ 7413.953] 24: 47:01000111
[ 7413.953] 25: 35:00110101
[ 7413.953] 26: e2:11100010
[ 7413.953] 27: de:11011110
[ 7413.953] 28: 52:01010010
[ 7413.953] 29: f3:11110011
[ 7413.953] 2a: 6a:01101010
[ 7413.953] 2b: 55:01010101
[ 7413.953] 2c: 55:01010101
[ 7413.953] 2d: 18:00011000
[ 7413.953] 2e: f7:11110111
[ 7413.953] 2f: fe:11111110
[ 7413.954] 30: 85:10000101
[ 7413.954] 31: 21:00100001
[ 7413.954] 32: f0:11110000
[ 7413.954] 33: 7b:01111011
[ 7413.954] 34: d6:11010110
[ 7413.954] 35: 00:00000000
[ 7413.954] 36: 00:00000000
[ 7413.954] 37: 00:00000000
[ 7413.954] 38: 00:00000000
[ 7413.954] 39: 92:10010010
[ 7413.954] 3a: 8f:10001111
[ 7413.954] 3b: 40:01000000
[ 7413.954] 3c: 60:01100000
[ 7413.954] 3d: 80:10000000
[ 7413.954] 3e: 14:00010100
[ 7413.954] 3f: ff:11111111
[ 7413.954] 40: ff:11111111
[ 7413.954] 41: ff:11111111
[ 7413.954] 42: 14:00010100
[ 7413.954] 43: 4d:01001101
[ 7413.954] 44: 00:00000000
[ 7413.954] 45: 60:01100000
[ 7413.954] 46: 58:01011000
[ 7413.954] 47: fd:11111101
[ 7413.954] 48: 00:00000000
[ 7413.954] 49: 01:00000001
[ 7413.954] 4a: 82:10000010
[ 7413.954] 4b: 69:01101001
[ 7413.954] 4c: 61:01100001
[ 7413.954] 4d: 03:00000011
[ 7413.954] CRT2: TV COPY PROTECTION, PART3 00 - 40:
[ 7413.954] 00: 00:00000000
[ 7413.954] 01: 1c:00011100
[ 7413.954] 02: 69:01101001
[ 7413.954] 03: 30:00110000
[ 7413.954] 04: 65:01100101
[ 7413.954] 05: 2e:00101110
[ 7413.954] 06: c1:11000001
[ 7413.954] 07: 80:10000000
[ 7413.954] 08: 4c:01001100
[ 7413.954] 09: 17:00010111
[ 7413.954] 0a: 40:01000000
[ 7413.954] 0b: 00:00000000
[ 7413.954] 0c: 24:00100100
[ 7413.954] 0d: 21:00100001
[ 7413.954] 0e: 21:00100001
[ 7413.954] 0f: 3c:00111100
[ 7413.954] 10: a4:10100100
[ 7413.954] 11: 34:00110100
[ 7413.954] 12: a0:10100000
[ 7413.954] 13: f5:11110101
[ 7413.954] 14: b7:10110111
[ 7413.954] 15: 52:01010010
[ 7413.954] 16: 48:01001000
[ 7413.954] 17: 58:01011000
[ 7413.954] 18: e9:11101001
[ 7413.954] 19: 2c:00101100
[ 7413.954] 1a: 00:00000000
[ 7413.954] 1b: 80:10000000
[ 7413.954] 1c: c8:11001000
[ 7413.954] 1d: 30:00110000
[ 7413.954] 1e: 00:00000000
[ 7413.954] 1f: 22:00100010
[ 7413.954] 20: 28:00101000
[ 7413.954] 21: 10:00010000
[ 7413.954] 22: 48:01001000
[ 7413.954] 23: 5a:01011010
[ 7413.954] 24: 00:00000000
[ 7413.954] 25: 50:01010000
[ 7413.955] 26: e4:11100100
[ 7413.955] 27: a0:10100000
[ 7413.955] 28: 02:00000010
[ 7413.955] 29: 78:01111000
[ 7413.955] 2a: 00:00000000
[ 7413.955] 2b: 90:10010000
[ 7413.955] 2c: 14:00010100
[ 7413.955] 2d: 4e:01001110
[ 7413.955] 2e: 19:00011001
[ 7413.955] 2f: 10:00010000
[ 7413.955] 30: 72:01110010
[ 7413.955] 31: 03:00000011
[ 7413.955] 32: 25:00100101
[ 7413.955] 33: 20:00100000
[ 7413.955] 34: c3:11000011
[ 7413.955] 35: e7:11100111
[ 7413.955] 36: 30:00110000
[ 7413.955] 37: 1c:00011100
[ 7413.955] 38: 42:01000010
[ 7413.955] 39: a2:10100010
[ 7413.955] 3a: a9:10101001
[ 7413.955] 3b: 01:00000001
[ 7413.955] 3c: 60:01100000
[ 7413.955] 3d: 6c:01101100
[ 7413.955] 3e: 40:01000000
[ 7413.955] 3f: a6:10100110
[ 7413.955] 40: 01:00000001
[ 7413.955] CRT2: SIGNAL REGISTERS, PART4 00 - 3A:
[ 7413.955] 00: 07:00000111
[ 7413.955] 01: e1:11100001
[ 7413.955] 02: 01:00000001
[ 7413.955] 03: 4f:01001111
[ 7413.955] 04: 00:00000000
[ 7413.955] 05: 00:00000000
[ 7413.955] 06: 00:00000000
[ 7413.955] 07: ff:11111111
[ 7413.955] 08: 3f:00111111
[ 7413.955] 09: 00:00000000
[ 7413.955] 0a: a5:10100101
[ 7413.955] 0b: 44:01000100
[ 7413.955] 0c: 83:10000011
[ 7413.955] 0d: 8e:10001110
[ 7413.955] 0e: 60:01100000
[ 7413.955] 0f: 03:00000011
[ 7413.955] 10: 80:10000000
[ 7413.955] 11: 00:00000000
[ 7413.955] 12: 08:00001000
[ 7413.955] 13: 01:00000001
[ 7413.955] 14: 01:00000001
[ 7413.955] 15: 2b:00101011
[ 7413.955] 16: f7:11110111
[ 7413.955] 17: 10:00010000
[ 7413.955] 18: 32:00110010
[ 7413.955] 19: 40:01000000
[ 7413.955] 1a: 00:00000000
[ 7413.955] 1b: 00:00000000
[ 7413.955] 1c: 28:00101000
[ 7413.955] 1d: 95:10010101
[ 7413.955] 1e: 10:00010000
[ 7413.955] 1f: f6:11110110
[ 7413.955] 20: aa:10101010
[ 7413.955] 21: d0:11010000
[ 7413.955] 22: fa:11111010
[ 7413.955] 23: c7:11000111
[ 7413.955] 24: 0e:00001110
[ 7413.955] 25: 10:00010000
[ 7413.955] 26: 06:00000110
[ 7413.955] 27: 8c:10001100
[ 7413.955] 28: b0:10110000
[ 7413.956] 29: 04:00000100
[ 7413.956] 2a: 00:00000000
[ 7413.956] 2b: 00:00000000
[ 7413.956] 2c: 02:00000010
[ 7413.956] 2d: 5f:01011111
[ 7413.956] 2e: 02:00000010
[ 7413.956] 2f: 3f:00111111
[ 7413.956] 30: 68:01101000
[ 7413.956] 31: 0d:00001101
[ 7413.956] 32: 70:01110000
[ 7413.956] 33: 39:00111001
[ 7413.956] 34: 10:00010000
[ 7413.956] 35: cb:11001011
[ 7413.956] 36: a4:10100100
[ 7413.956] 37: 08:00001000
[ 7413.956] 38: 51:01010001
[ 7413.956] 39: ff:11111111
[ 7413.956] 3a: fd:11111101
[ 7413.956] CRT2: PALETTE SIGNAL REGISTERS, PART5 00 - 00 (?):
[ 7413.956] 00: 00:00000000
[ 7413.956] (II) SIS(0): Default Xv adaptor is Video Overlay
[ 7413.956] (II) SIS(0): [DRI] installation complete
[ 7413.956] (II) SIS(0): Direct rendering enabled
[ 7414.003] (II) SIS(0): Initialized SISCTRL extension version 0.1
[ 7414.003] (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
[ 7414.003] (==) RandR enabled
[ 7414.017] (II) SELinux: Disabled on system
[ 7414.019] (II) AIGLX: Screen 0 is not DRI2 capable
[ 7414.019] (EE) AIGLX: reverting to software rendering
[ 7414.048] (II) AIGLX: Loaded and initialized swrast
[ 7414.048] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 7414.118] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 7414.118] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7414.118] (II) LoadModule: "evdev"
[ 7414.119] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7414.119] (II) Module evdev: vendor="X.Org Foundation"
[ 7414.119] compiled for 1.15.99.904, module version = 2.8.2
[ 7414.119] Module class: X.Org XInput Driver
[ 7414.119] ABI class: X.Org XInput driver, version 21.0
[ 7414.119] (II) Using input driver 'evdev' for 'Power Button'
[ 7414.119] (**) Power Button: always reports core events
[ 7414.119] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 7414.119] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7414.119] (--) evdev: Power Button: Found keys
[ 7414.119] (II) evdev: Power Button: Configuring as keyboard
[ 7414.119] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 7414.119] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7414.119] (**) Option "xkb_rules" "evdev"
[ 7414.119] (**) Option "xkb_model" "pc105"
[ 7414.119] (**) Option "xkb_layout" "pl"
[ 7414.157] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 7414.157] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7414.157] (II) Using input driver 'evdev' for 'Video Bus'
[ 7414.157] (**) Video Bus: always reports core events
[ 7414.157] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 7414.158] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7414.158] (--) evdev: Video Bus: Found keys
[ 7414.158] (II) evdev: Video Bus: Configuring as keyboard
[ 7414.158] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input9/event5"
[ 7414.158] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7414.158] (**) Option "xkb_rules" "evdev"
[ 7414.158] (**) Option "xkb_model" "pc105"
[ 7414.158] (**) Option "xkb_layout" "pl"
[ 7414.159] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7414.159] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7414.159] (II) Using input driver 'evdev' for 'Power Button'
[ 7414.159] (**) Power Button: always reports core events
[ 7414.159] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 7414.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7414.159] (--) evdev: Power Button: Found keys
[ 7414.159] (II) evdev: Power Button: Configuring as keyboard
[ 7414.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event1"
[ 7414.159] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7414.159] (**) Option "xkb_rules" "evdev"
[ 7414.159] (**) Option "xkb_model" "pc105"
[ 7414.159] (**) Option "xkb_layout" "pl"
[ 7414.160] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 7414.160] (II) No input driver specified, ignoring this device.
[ 7414.160] (II) This device may have been added with another device file.
[ 7414.161] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 7414.161] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7414.161] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7414.161] (**) Sleep Button: always reports core events
[ 7414.161] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 7414.161] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7414.161] (--) evdev: Sleep Button: Found keys
[ 7414.161] (II) evdev: Sleep Button: Configuring as keyboard
[ 7414.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event2"
[ 7414.161] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7414.161] (**) Option "xkb_rules" "evdev"
[ 7414.161] (**) Option "xkb_model" "pc105"
[ 7414.161] (**) Option "xkb_layout" "pl"
[ 7414.163] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
[ 7414.163] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 7414.163] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 7414.163] (**) USB 2.0 Camera: always reports core events
[ 7414.163] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event8"
[ 7414.163] (--) evdev: USB 2.0 Camera: Vendor 0x13d3 Product 0x5130
[ 7414.163] (--) evdev: USB 2.0 Camera: Found keys
[ 7414.163] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[ 7414.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input15/event8"
[ 7414.163] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 10)
[ 7414.163] (**) Option "xkb_rules" "evdev"
[ 7414.163] (**) Option "xkb_model" "pc105"
[ 7414.163] (**) Option "xkb_layout" "pl"
[ 7414.164] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 7414.164] (II) No input driver specified, ignoring this device.
[ 7414.164] (II) This device may have been added with another device file.
[ 7414.165] (II) config/udev: Adding input device HDA SIS966 Mic (/dev/input/event11)
[ 7414.165] (II) No input driver specified, ignoring this device.
[ 7414.165] (II) This device may have been added with another device file.
[ 7414.165] (II) config/udev: Adding input device HDA SIS966 Headphone (/dev/input/event10)
[ 7414.165] (II) No input driver specified, ignoring this device.
[ 7414.165] (II) This device may have been added with another device file.
[ 7414.166] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
[ 7414.166] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 7414.166] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 7414.166] (**) Asus Laptop extra buttons: always reports core events
[ 7414.166] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event6"
[ 7414.166] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[ 7414.166] (--) evdev: Asus Laptop extra buttons: Found keys
[ 7414.166] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[ 7414.166] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input10/event6"
[ 7414.166] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[ 7414.166] (**) Option "xkb_rules" "evdev"
[ 7414.166] (**) Option "xkb_model" "pc105"
[ 7414.166] (**) Option "xkb_layout" "pl"
[ 7414.167] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7414.167] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7414.167] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7414.167] (**) AT Translated Set 2 keyboard: always reports core events
[ 7414.167] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7414.168] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7414.168] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7414.168] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7414.168] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7414.168] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 7414.168] (**) Option "xkb_rules" "evdev"
[ 7414.168] (**) Option "xkb_model" "pc105"
[ 7414.168] (**) Option "xkb_layout" "pl"
[ 7414.169] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[ 7414.169] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7414.169] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7414.169] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7414.169] (II) LoadModule: "synaptics"
[ 7414.169] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7414.170] (II) Module synaptics: vendor="X.Org Foundation"
[ 7414.170] compiled for 1.15.99.904, module version = 1.8.0
[ 7414.170] Module class: X.Org XInput Driver
[ 7414.170] ABI class: X.Org XInput driver, version 21.0
[ 7414.170] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7414.170] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7414.170] (**) Option "Device" "/dev/input/event12"
[ 7414.170] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088 (res 0)
[ 7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 (res 0)
[ 7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7414.171] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7414.171] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event12"
[ 7414.171] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[ 7414.171] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7414.171] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7414.171] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.154
[ 7414.171] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7414.171] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7414.171] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7414.171] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7414.172] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7414.172] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7414.173] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 7414.173] (II) No input driver specified, ignoring this device.
[ 7414.173] (II) This device may have been added with another device file.ls /dev/tty*:
Kod:
/dev/tty /dev/tty19 /dev/tty3 /dev/tty40 /dev/tty51 /dev/tty62 /dev/tty0 /dev/tty2 /dev/tty30 /dev/tty41 /dev/tty52 /dev/tty63 /dev/tty1 /dev/tty20 /dev/tty31 /dev/tty42 /dev/tty53 /dev/tty7 /dev/tty10 /dev/tty21 /dev/tty32 /dev/tty43 /dev/tty54 /dev/tty8 /dev/tty11 /dev/tty22 /dev/tty33 /dev/tty44 /dev/tty55 /dev/tty9 /dev/tty12 /dev/tty23 /dev/tty34 /dev/tty45 /dev/tty56 /dev/ttyS0 /dev/tty13 /dev/tty24 /dev/tty35 /dev/tty46 /dev/tty57 /dev/ttyS1 /dev/tty14 /dev/tty25 /dev/tty36 /dev/tty47 /dev/tty58 /dev/ttyS2 /dev/tty15 /dev/tty26 /dev/tty37 /dev/tty48 /dev/tty59 /dev/ttyS3 /dev/tty16 /dev/tty27 /dev/tty38 /dev/tty49 /dev/tty6 /dev/tty17 /dev/tty28 /dev/tty39 /dev/tty5 /dev/tty60 /dev/tty18 /dev/tty29 /dev/tty4 /dev/tty50 /dev/tty61
Bardzo prosiłbym o pomoc w zdiagnozowaniu błędu.
Edit: To na pewno problem z Xem, ponieważ po zbootowaniu kernela z opcją "init=/bin/sh" mogę przełączać terminal i używając chvt i Ctrl+Alt+F[1-6].
Ostatnio edytowany przez Zath (2014-09-01 03:36:57)
[img]http://i.imgur.com/L4bT95a.png[/img]
Sześcioletni laptop, dobrze się trzyma na Archu :)
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00010 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00126 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.217.207.112' WHERE u.id=1 |
| 0.00328 | UPDATE punbb_online SET logged=1732376472 WHERE ident='18.217.207.112' |
| 0.00095 | SELECT * FROM punbb_online WHERE logged<1732376172 |
| 0.00092 | DELETE FROM punbb_online WHERE ident='18.188.68.115' |
| 0.00095 | DELETE FROM punbb_online WHERE ident='18.226.17.251' |
| 0.00076 | DELETE FROM punbb_online WHERE ident='85.208.96.212' |
| 0.00104 | SELECT topic_id FROM punbb_posts WHERE id=272147 |
| 0.00096 | SELECT id FROM punbb_posts WHERE topic_id=26184 ORDER BY posted |
| 0.00088 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=26184 AND t.moved_to IS NULL |
| 0.00006 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00241 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=26184 ORDER BY p.id LIMIT 0,25 |
| 0.00094 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=26184 |
| Total query time: 0.01455 s | |