Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2006-04-30 16:14:25

  bns - unknown

bns
unknown
Zarejestrowany: 2005-12-25
Serwis

Czarno bialy obraz na tv

Witam

Mam problem w podlaczeniu TV (jakis Phillips ~10 lat ;P ) do karty graficznej (radeon x600 pci-express)
Obraz widac ale jest czarno bialy.
Pod windowsem mialem ten sam problem ale rozwiazaniem problemu okazalo sie kupna kabla (Hama 00041972) z odpowiednim przelacznikiem http://www.hama.de/portal/articleId*106251/action*2563/searchMode*1/bySearch*0041972
po przelaczeniu pod windowsem obraz byl kolorowy pod linuksem nie ;/
jak przelaczam obraz z tv to pisze mi ze sygnal jest pal zas jak na obraz z  kompa to ntsc choc w konfigu mam zeby nadawal w pal-g

nic juz nie rozmumiem z tego moze macie jakies pomysl

(debian etch, xorg-6.9)

cat /etc/X11/xorg.conf

Kod:

Section "ServerLayout"
    Identifier     "ATI Graphics Adapter 0"
    Screen      0  "aticonfig Screen 0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

    # if the local font server has problems, we can fall back on these
    FontPath     "unix/:7100"
    FontPath     "/usr/lib/X11/fonts/misc"
    FontPath     "/usr/lib/X11/fonts/100dpi:unscaled"
    FontPath     "/usr/lib/X11/fonts/75dpi:unscaled"
    FontPath     "/usr/lib/X11/fonts/Type1"
    FontPath     "/usr/lib/X11/fonts/Speedo"
    FontPath     "/usr/local/share/fonts"
    FontPath     "/usr/share/fonts"
    FontPath     "/usr/X11R6/lib/X11/fonts"
    FontPath     "/usr/share/fonts/truetype"
    FontPath     "/usr/share/fonts/type1"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc"
    FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
EndSection

Section "Module"
    SubSection "extmod"
        Option "omit xfree86-dga"
    EndSubSection 
    Load  "GLcore"
    Load  "bitmap"
    Load  "dbe"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "record"
    Load  "speedo"
    Load  "type1"
    Load  "vbe"
    Load  "v4l"
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "keyboard"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "pl"
    Option        "XkbVariant" "PL"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ImPS/2"
    Option        "ZAxisMapping" "4 5"
    Option        "Emulate3Buttons"
    Option        "Emulate3Timeout" "50"
EndSection

Section "Monitor"
    Identifier   "aticonfig Monitor 0"
### Uncomment if you don't want to default to DDC:
    ModeLine     "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808
    ModeLine     "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900
#    HorizSync    30.0 - 69.0
#    VertRefresh  50.0 - 160.0
    Option        "DPMS"
EndSection

Section "Device"
    Identifier  "ATI Graphics Adapter 0"
    Driver        "fglrx"
    Option        "UseFBDev" "true"
#TV-out start
    Option      "NoTV" "no"
    Option        "TVFormat" "PAL-G"
    Option        "TVStandard" "EURO"
    Option        "DesktopSetup" "0x00000100"
    Option        "TVHSizeAdj" "-2"
    Option        "TVVSizeAdj" "2"
    Option        "TVHPosAdj" "0"
    Option        "TVVPosAdj" "0"
    Option        "TVHStartAdj" "0"
    Option        "TVColorAdj" "0"
    Option        "GammaCorrectionI" "0x06419064"
    Option        "GammaCorrectionII" "0x06419064"
#TV-out end
    BusID        "PCI:4:0:0"
    Option        "backingstore" "true"
    Option        "RenderAccel" "true"
    Option        "AllowGLXWithComposite" "true"
    Option        "VideoOverlay" "on"
    Option        "OpenGLOverlay" "off"
    Option        "UseInternalAGPGART" "no"
EndSection

Section "Screen"
    Identifier "aticonfig Screen 0"
    Device     "ATI Graphics Adapter 0"
    Monitor    "aticonfig Monitor 0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes    "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1152x864" "1024x768" "800x600"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1152x864" "1024x768" "800x600"
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection
Pozdrawiam,
[url=http://banasiak.me]bns[/url]

Offline

 

#2  2006-04-30 16:59:16

  terefere - Członek DUG

terefere
Członek DUG
Zarejestrowany: 2005-09-16
Serwis

Re: Czarno bialy obraz na tv

W polsce głównymi standardami są PAL-BG bądź też PAL-DK może na którymś z tych pójdzie

Nigdy się niektórych rzeczy nie dowiesz, jeśli na niektóre pytania samemu sobie nie odpowiesz - STFW

Offline

 

#3  2006-04-30 18:40:12

  bns - unknown

bns
unknown
Zarejestrowany: 2005-12-25
Serwis

Re: Czarno bialy obraz na tv

ustawialem PAL-D, PAL-G nawet PAL-SCART i nic

zaintersowalem sie opcja aticonfig

Kod:

aticonfig --initial=dual-head

porobil mi w /etc/X11/xorg.conf po dwie sekcje, np.

Kod:

Section "Monitor"

### Uncomment if you don't want to default to DDC:
        Identifier   "aticonfig Monitor 0"
        ModeLine     "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808
        ModeLine     "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900
        Option      "DPMS"
EndSection

Section "Monitor"
        Identifier   "aticonfig Monitor 1"
EndSection

czyli mam rozumiec teraz jedna od monitora a druga od tv i wystarczy pokonfigurowac?

teraz pytanie do tych co maja tv podlaczony do kompa moze podadza swoj xorg.conf dla porownania ;)

Pozdrawiam,
[url=http://banasiak.me]bns[/url]

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.010 seconds, 15 queries executed ]

Informacje debugowania

Time (s) Query
0.00011 SET CHARSET latin2
0.00005 SET NAMES latin2
0.00098 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.224.55.63' WHERE u.id=1
0.00076 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.224.55.63', 1732722686)
0.00046 SELECT * FROM punbb_online WHERE logged<1732722386
0.00077 DELETE FROM punbb_online WHERE ident='18.117.105.215'
0.00074 DELETE FROM punbb_online WHERE ident='18.221.183.34'
0.00073 DELETE FROM punbb_online WHERE ident='18.224.63.123'
0.00083 DELETE FROM punbb_online WHERE ident='54.36.148.117'
0.00078 SELECT topic_id FROM punbb_posts WHERE id=27330
0.00011 SELECT id FROM punbb_posts WHERE topic_id=3482 ORDER BY posted
0.00060 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=3482 AND t.moved_to IS NULL
0.00004 SELECT search_for, replace_with FROM punbb_censoring
0.00074 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=3482 ORDER BY p.id LIMIT 0,25
0.00082 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=3482
Total query time: 0.00852 s