Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2015-03-20 12:17:16

  andreq - Członek DUG

andreq
Członek DUG
Skąd: Nisko
Zarejestrowany: 2005-01-11

Interpretacja SMART dysku

Witam

Mam dysk w desktopie, martwi mnie kilka wpisów SMART:

Kod:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   199   051    Pre-fail  Always       -       66

Kod:

Error 10555 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 b1 c9 1f ed  Error: UNC at LBA = 0x0d1fc9b1 = 220187057

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 01 b1 c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 b0 c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 af c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 ae c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 ad c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)

Dysk ma parę miesięcy, kmputer nie przenoszony, dysk nie upadł, ostatnio nie chciał z niego wystartować windows, pomogła naprawa przy pomocy Data Lifeguard Diagnostic w czasie Extended Test, co o tym sądzicie?

Cały SMART:

Kod:

smartctl 6.4 2014-10-07 r4002 [i686-linux-3.17-1-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Black
Device Model:     WDC WD1002FAEX-00Z3A0
Serial Number:    WD-WCATRC546024
LU WWN Device Id: 5 0014ee 2b389b5f5
Firmware Version: 05.01D05
User Capacity:    1,000,204,886,016 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Mar 20 11:57:29 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (16680) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.                                                                                             
                                        Selective Self-test supported.                                                                                              
SMART capabilities:            (0x0003) Saves SMART data before entering                                                                                            
                                        power-saving mode.                                                                                                          
                                        Supports SMART auto save timer.                                                                                             
Error logging capability:        (0x01) Error logging supported.                                                                                                    
                                        General Purpose Logging supported.                                                                                          
Short self-test routine                                                                                                                                             
recommended polling time:        (   2) minutes.                                                                                                                    
Extended self-test routine                                                                                                                                          
recommended polling time:        ( 193) minutes.                                                                                                                    
Conveyance self-test routine                                                                                                                                        
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3037) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   199   051    Pre-fail  Always       -       66
  3 Spin_Up_Time            0x0027   176   174   021    Pre-fail  Always       -       4191
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1257
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2177
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1242
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       301
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       955
194 Temperature_Celsius     0x0022   105   096   000    Old_age   Always       -       42
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 10555 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 10555 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 b1 c9 1f ed  Error: UNC at LBA = 0x0d1fc9b1 = 220187057

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 01 b1 c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 b0 c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 af c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 ae c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 ad c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)

Error 10554 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b1 c9 1f ed  Error: UNC at LBA = 0x0d1fc9b1 = 220187057

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 00 00 c9 1f ed 00      00:31:55.245  READ VERIFY SECTOR(S)
  40 da 00 00 c8 1f ed 00      00:31:55.245  READ VERIFY SECTOR(S)
  40 da 00 00 c7 1f ed 00      00:31:55.245  READ VERIFY SECTOR(S)
  40 da 00 00 c6 1f ed 00      00:31:55.245  READ VERIFY SECTOR(S)
  40 da 00 00 c5 1f ed 00      00:31:55.244  READ VERIFY SECTOR(S)

Error 10553 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 b7 c0 1f ed  Error: UNC at LBA = 0x0d1fc0b7 = 220184759

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 01 b7 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)
  40 da 01 b6 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)
  40 da 01 b5 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)
  40 da 01 b4 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)
  40 da 01 b3 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)

Error 10552 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b7 c0 1f ed  Error: UNC at LBA = 0x0d1fc0b7 = 220184759

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 00 00 c0 1f ed 00      00:31:51.820  READ VERIFY SECTOR(S)
  40 da 00 00 bf 1f ed 00      00:31:51.818  READ VERIFY SECTOR(S)
  40 da 00 00 be 1f ed 00      00:31:51.817  READ VERIFY SECTOR(S)
  40 da 00 00 bd 1f ed 00      00:31:51.816  READ VERIFY SECTOR(S)
  40 da 00 00 bc 1f ed 00      00:31:51.815  READ VERIFY SECTOR(S)

Error 10551 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 ab 63 1f ed  Error: UNC at LBA = 0x0d1f63ab = 220160939

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 01 ab 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)
  40 da 01 aa 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)
  40 da 01 a9 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)
  40 da 01 a8 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)
  40 da 01 a7 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed without error       00%      2137         -
# 2  Conveyance offline  Completed: read failure       70%      2133         21834257
# 3  Conveyance offline  Completed: read failure       70%      2133         21834257

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Offline

 

#2  2015-03-20 18:22:54

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Interpretacja SMART dysku

Zapuść pełne skanowanie dysku i wklej raport.

Offline

 

#3  2015-03-20 18:57:28

  uzytkownikubunt - Zbanowany

uzytkownikubunt
Zbanowany
Zarejestrowany: 2012-04-25

Re: Interpretacja SMART dysku

1782

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:14:25)

Offline

 

#4  2015-03-20 21:47:27

  pasqdnik - Pijak ;-P

pasqdnik
Pijak ;-P
Skąd: Wrocław
Zarejestrowany: 2006-03-06

Re: Interpretacja SMART dysku

Jeśli dysk jest na gwarancji to trzeba zrobić backup i reklamować.


5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0

Dum spiro - spero ...
pozdrawiam, pasqdnik

Offline

 

#5  2015-03-21 00:28:09

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Interpretacja SMART dysku

Ja tam podejrzewam problem z mechaniką dysku. 10k błędów, rozkręcanie ponad 4s, błędy odczytu i do tego problemy chyba z zasilaniem. Jeśli taki stan się utrzymuje, to dysk do wymiany, temu pisałem by dać pełny skan.

Offline

 

#6  2015-03-22 16:58:50

  andreq - Członek DUG

andreq
Członek DUG
Skąd: Nisko
Zarejestrowany: 2005-01-11

Re: Interpretacja SMART dysku

Zrobiony pełen skan, wynik:

Kod:

smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-1-grml-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Black
Device Model:     WDC WD1002FAEX-00Z3A0
Serial Number:    WD-WCATRC546024
LU WWN Device Id: 5 0014ee 2b389b5f5
Firmware Version: 05.01D05
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Mar 22 15:54:57 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (16680) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 193) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x3037)    SCT Status supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   199   051    Pre-fail  Always       -       66
  3 Spin_Up_Time            0x0027   230   174   021    Pre-fail  Always       -       1483
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1270
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2197
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1255
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       308
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       961
194 Temperature_Celsius     0x0022   108   096   000    Old_age   Always       -       39
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 10555 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 10555 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 b1 c9 1f ed  Error: UNC at LBA = 0x0d1fc9b1 = 220187057

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 01 b1 c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 b0 c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 af c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 ae c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)
  40 da 01 ad c9 1f ed 00      00:31:56.961  READ VERIFY SECTOR(S)

Error 10554 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b1 c9 1f ed  Error: UNC at LBA = 0x0d1fc9b1 = 220187057

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 00 00 c9 1f ed 00      00:31:55.245  READ VERIFY SECTOR(S)
  40 da 00 00 c8 1f ed 00      00:31:55.245  READ VERIFY SECTOR(S)
  40 da 00 00 c7 1f ed 00      00:31:55.245  READ VERIFY SECTOR(S)
  40 da 00 00 c6 1f ed 00      00:31:55.245  READ VERIFY SECTOR(S)
  40 da 00 00 c5 1f ed 00      00:31:55.244  READ VERIFY SECTOR(S)

Error 10553 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 b7 c0 1f ed  Error: UNC at LBA = 0x0d1fc0b7 = 220184759

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 01 b7 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)
  40 da 01 b6 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)
  40 da 01 b5 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)
  40 da 01 b4 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)
  40 da 01 b3 c0 1f ed 00      00:31:53.529  READ VERIFY SECTOR(S)

Error 10552 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b7 c0 1f ed  Error: UNC at LBA = 0x0d1fc0b7 = 220184759

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 00 00 c0 1f ed 00      00:31:51.820  READ VERIFY SECTOR(S)
  40 da 00 00 bf 1f ed 00      00:31:51.818  READ VERIFY SECTOR(S)
  40 da 00 00 be 1f ed 00      00:31:51.817  READ VERIFY SECTOR(S)
  40 da 00 00 bd 1f ed 00      00:31:51.816  READ VERIFY SECTOR(S)
  40 da 00 00 bc 1f ed 00      00:31:51.815  READ VERIFY SECTOR(S)

Error 10551 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 ab 63 1f ed  Error: UNC at LBA = 0x0d1f63ab = 220160939

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 da 01 ab 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)
  40 da 01 aa 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)
  40 da 01 a9 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)
  40 da 01 a8 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)
  40 da 01 a7 63 1f ed 00      00:31:50.017  READ VERIFY SECTOR(S)

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      2192         -
# 2  Extended offline    Aborted by host               90%      2181         -
# 3  Conveyance offline  Completed without error       00%      2137         -
# 4  Conveyance offline  Completed: read failure       70%      2133         21834257
# 5  Conveyance offline  Completed: read failure       70%      2133         21834257
2 of 2 failed self-tests are outdated by newer successful extended offline self-test # 1

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Offline

 

#7  2015-03-22 17:33:15

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Interpretacja SMART dysku

Test, jak widać, przechodzi bez błędów. Czas startu dysku też jest wyraźnie niższy. być może te problemy, które miałeś były tymczasowe i teraz już dysk się powinien normalnie zachowywać. Nie wiem czy jest sens iść z tym do serwisu, pewnie ci po miesiącu powiedzą to samo. Zapisz sobie ten wynik i za tydzień przeskanuj ponownie. Potem sobie porównaj te raporty i jeśli cyferki będą rosły, to dysk będzie do wymiany. Póki co, to tylko Power-Off_Retract_Count poszedł w górę o parę punktów, choć ja tam nie wiem czy to coś oznacza -- u mnie takiego parametru nawet nie ma. xD Mam jakiś inny na pozycji 192 ale on jest wyraźnie niższy. Także monitoruj i jeśli nie zauważysz problemów w pracy urządzenia, to nic mu nie będzie

Offline

 

#8  2015-03-22 17:41:56

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: Interpretacja SMART dysku

Różnymi Pre-failami nie ma się za bardzo co martwić, mój dyzio takie komunikaty miał w SMART już w 2008 i chodzi do dzisiaj.

Wygląda w ogóle strasznie (jak zawsze), a chodzi mniej więcej tak samo,
jak 7 lat temu:

Kod:

smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.19.2-gr1] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda ES
Device Model:     ST3400620NS
Serial Number:    9QH0BX9K
Firmware Version: 3.AEG
User Capacity:    400,088,457,216 bytes [400 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Sun Mar 22 17:25:37 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (  25)    The self-test routine was aborted by
                    the host.
Total time to complete Offline 
data collection:         (  430) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 132) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       123653519
  3 Spin_Up_Time            0x0003   094   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   096   096   020    Old_age   Always       -       4269
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   089   060   030    Pre-fail  Always       -       806780342
  9 Power_On_Hours          0x0032   067   067   000    Old_age   Always       -       29126
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   020    Old_age   Always       -       4476
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   052   045    Old_age   Always       -       39 (Min/Max 23/39)
194 Temperature_Celsius     0x0022   039   048   000    Old_age   Always       -       39 (0 16 0 0 0)
195 Hardware_ECC_Recovered  0x001a   073   060   000    Old_age   Always       -       201879888
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Aborted by host               90%     26704         -
# 2  Extended offline    Aborted by host               90%     26700         -
# 3  Extended offline    Interrupted (host reset)      90%     25088         -
# 4  Extended offline    Aborted by host               90%     23429         -
# 5  Extended offline    Aborted by host               90%     23428         -
# 6  Extended offline    Aborted by host               90%     23428         -
# 7  Short offline       Aborted by host               80%     23428         -
# 8  Extended offline    Interrupted (host reset)      90%     15764         -
# 9  Extended offline    Aborted by host               90%     15760         -
#10  Short offline       Completed without error       00%     14372         -
#11  Extended offline    Completed without error       00%      8707         -
#12  Extended offline    Aborted by host               90%      6704         -
#13  Short offline       Completed without error       00%      5860         -
#14  Extended offline    Interrupted (host reset)      80%      5860         -
#15  Extended offline    Interrupted (host reset)      50%      3100         -
#16  Extended offline    Aborted by host               90%      3098         -
#17  Short offline       Interrupted (host reset)      90%       435         -
#18  Extended offline    Self-test routine in progress 90%     29114         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

I w dodatku jest z tych sławnych dysków Seagate, co to przeważnie po pół roku się rozlatują. :D

Pozdro
;-)

Ostatnio edytowany przez Jacekalex (2015-03-22 17:44:51)

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#9  2015-03-22 19:00:35

  andreq - Członek DUG

andreq
Członek DUG
Skąd: Nisko
Zarejestrowany: 2005-01-11

Re: Interpretacja SMART dysku

Dzięki. Zobaczę co będzie się z nim działo w przyszłości.

Offline

 

#10  2015-03-22 19:09:30

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Interpretacja SMART dysku

[quote=pasqdnik]Jeśli dysk jest na gwarancji to trzeba zrobić backup i reklamować.


5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0[/quote]
https://forum.dug.net.pl/viewtopic.php?pid=256031

Offline

 

#11  2015-03-22 19:38:18

  pasqdnik - Pijak ;-P

pasqdnik
Pijak ;-P
Skąd: Wrocław
Zarejestrowany: 2006-03-06

Re: Interpretacja SMART dysku

[quote=yossarian][quote=pasqdnik]Jeśli dysk jest na gwarancji to trzeba zrobić backup i reklamować.


5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0[/quote]
https://forum.dug.net.pl/viewtopic.php?pid=256031[/quote]
Grr nie wiem, czemu mi się to wkleiło. Dopóki jest PASSED to ok.

Dum spiro - spero ...
pozdrawiam, pasqdnik

Offline

 

#12  2015-03-22 21:31:01

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Interpretacja SMART dysku

Jacekalex, tylko, że te seagaty mają dziwne przeliczniki w smarcie, temu masz takie kosmiczne liczby ale to nie oznacza, że coś się chrzani. xD Ja tam nie umiem tego czytać i w sumie mi nie za bardzo chce się szukać info jak przeliczyć te wartości na zrozumiałe dla człowieka. WD ma normalny raport smart i zwykle analiza nie przysparza problemów i widać od razu gdzie są problemy.

Offline

 

#13  2015-03-22 21:36:05

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: Interpretacja SMART dysku

@up

Ja nie twierdzę, że coś się chrzani, na razie chodzi, chociaż na przestrzeni ostatnich 6 miechów dwukrotnie musiałem dyzia naprawiać, raz zjebał się grub z rekordu rozruchowego, i musiałem go przywracać z LiveDVD, a raz nie chiał wstać system z sda1, pomogło wtedy fsck.

Wcześniej przez 7 lat nic podobnego nie widziałem, także zacząłem się dyziowi uważniej przyglądać.

Poza tym wskaźniki w Seagate nie są takie straszne, dopóki Power on Hours nie pokazują w sekundach. xD

Ostatnio edytowany przez Jacekalex (2015-03-22 21:38:24)

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.010 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00011 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00104 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.217.118.7' WHERE u.id=1
0.00083 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.217.118.7', 1732312252)
0.00046 SELECT * FROM punbb_online WHERE logged<1732311952
0.00077 SELECT topic_id FROM punbb_posts WHERE id=284963
0.00116 SELECT id FROM punbb_posts WHERE topic_id=27197 ORDER BY posted
0.00060 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=27197 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00181 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=27197 ORDER BY p.id LIMIT 0,25
0.00083 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=27197
Total query time: 0.0077 s